BE3850 Model A User Guide

MODEL: BE-3850
2.4GHZ CORDLESS TELEPHONE
WITH CALL WAITING CALLER ID
INSTALLATION AND OPERATING GUIDE
600-1010102-B
IMPORTANT: To receive Caller ID information on incoming telephone calls, you must
subscribe to the Caller ID service provided by your local telephone company; there is a
fee for this service and it may not be available in all areas.
BE-3850 TABLE OF CONTENTS
Important Safety Instructions ................2
Changing the Flash Time .....................26
Changing the Pause Time ....................26
Programming One-Touch Voice Mail
Dialing .................................................27
Deleting Message Waiting Indication ...27
Setting the Area Code .........................28
FCC Regulations .................................3-4
Battery Cautionary Instructions ............5
BE-3850 Parts Checklist .........................6
Location of Controls and Features ...7-11
Handset ..............................................7-8
Base ................................................9-10
LCD Display ........................................11
Speed Dialing ...................................29-32
Storing Phone Numbers ......................29
Letter Table ..........................................30
Viewing the Phone Book ......................30
Making Calls from the Phone Book ......31
Editing a Stored Number .....................31
Deleting a Stored Number....................32
Priority Calls .....................................32
Blocked Calls .......................................32
Choosing a Location ............................12
Telephone Setup ..............................13-15
Connecting the Base ...........................13
Wall Mounting ......................................14
Tone/Pulse Switch ...............................15
Handset Volume ..................................15
Caller ID ............................................33-37
When You Receive a Call .....................33
Viewing the Caller ID List ....................33
Caller ID Displays ................................34
Caller ID with Call Waiting Service .......35
Storing Caller ID Records ....................35
Deleting Caller ID Records ..................36
Returning Caller ID Calls .....................37
Battery Installation ...............................16
Battery Duration ...................................16
When the Battery Needs Charging ......16
When to Purchase a New
Battery Pack ........................................16
Headset and Data Jack..........................17
The Data Jack ......................................17
The Headset Jack.................................17
Belt-Clip ...............................................17
Message Waiting ...................................38
Using One-Touch Voice Mail Dialing ....38
New Call Light ......................................38
Basic Displays.......................................18
Other Features ......................................39
Using the Handset Finder (PAGE) ......39
Out-of-Range Warning ........................39
Channel Changing ...............................39
Extension In-Use .................................39
Basic Operation................................19-20
Making Calls .........................................19
Receiving Calls.....................................19
Redialing..............................................20
Addit ional Options..............................20
Care and Maintenance .........................40
Settings.............................................21-28
Handset Settings ............................21-22
Setting the Ringer Level .......................22
Changing the Language ......................23
Turning the First Ring On or Off ...........23
Setting the Time and Date ...................24
Adjusting the Contrast .........................25
Setting the PBX Number ......................25
Troubleshooting ..............................41-42
Warranty ................................................43
Glossary ................................................44
Wall Mount Template .............................45
IMPORTANT SAFETY INSTRUCTIONS
This symbol is to alert you to important operating or servicing instructions that may appear in the
user's manual. Always follow basic safety precautions when using this product to reduce the risk of
injury, fire, or electrical shock.
When using this product, basic safety precautions should always be followed to reduce the risk of fire, electric shock
and injury to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Use only with class 2 power source DC 9V 300mA.
4. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
5. Do not use this product near water; for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement
or near a swimming pool.
6. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
7. Slots and openings in the cabinet back or bottom are provided for ventilation. To protect it from overheating, these openings
must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or
other similar surface. This product should never be placed near or over a radiator or heat register. This product should not
be placed in an enclosed environment unless proper ventilation is provided.
8. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by animals or
persons walking on it.
9. Do not overload wall outlets and extension cords as this can result in risk of fire or electrical shock.
10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short
out parts that could result in a risk of fire or electrical shock. Never spill liquid of any kind on the product.
11. To reduce the risk of electrical shock, do not disassemble this product. Instead take it to a qualified service person when
service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks.
Incorrect re-assembly can cause electrical shock when the appliance is subsequently used.
12. Unplug all cords and refer servicing to qualified service personnel under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating instructions. Adjust only those controls covered in
the operating instructions. Improper adjustment of other controls may result in damage and require work by a qualified
technician to restore the product to normal operation.
13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric
shock from lightning.
14. Do not use a telephone to report a gas leak in the vicinity of the leak.
IF YOUR PRODUCT UTILIZES BATTERIES, THE FOLLOWING ADDITIONAL PRECAUTIONS SHOULD BE OBSERVED:
1. Use only the type and size of batteries specified in the users manual.
2. Do not dispose of batteries in a fire; the cells may explode. Check with local codes for possible special disposal locations.
3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may
be toxic if swallowed.
4. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets and
keys. The battery or conductor may overheat and cause burns.
5. Do not attempt to recharge the batteries with or identified for use with this product. The batteries may leak corrosive
electrolyte or explode.
6. Do not attempt to rejuvenate the batteries provided with or identified for use with this product by heating them. Sudden
release of the battery electrolyte may occur causing burns or irritation to eyes or skin.
7. When replacing batteries, all batteries should be replaced at the same time. Mixing fresh and discharged batteries could
increase internal cell pressure and rupture the discharged batteries.
8. When inserting the batteries into this product, the proper polarity or direction must be observed. Reverse insertion of
batteries can cause charging, which may result in leakage or explosion.
9. Remove the batteries from this product if the product will not be used for a long period of time (several months or more)
since during this time the batteries could leak, damaging the product.
10. Discard "dead" batteries as soon as possible since they are more likely to leak in a product.
11. Do not store this product, or the batteries provided with or for identified use with this product, in high temperature areas.
12. If your product uses a rechargeable battery, charge the battery(ies) only in accordance with the instructions and limitation
specified in the User Manual.
Battery Order Form ..............................46
SAVE THESE INSTRUCTIONS
1
2
FCC REGULATIONS
FCC REGULATIONS CONTINUED
Modifying or tampering with the telephone's internal components can cause a malfunction and
might invalidate the telephone's warranty and void your FCC authorization to operate it. If the
trouble is harming the telephone lines, the telephone company might ask you to disconnect the
telephone until you have resolved the problem.
INTERFERENCE INFORMATION: PART 15 OF FCC RULES
Some telephone equipment generates and uses radio frequency energy which if not properly
installed, may cause interference to radio and television reception.
As it complies with Part 68 of the FCC rules, your unit has been registered with the FCC.
The FCC requires us to provide you with the following information:
1. Connection and use with the nationwide telephone network:
The FCC requires that you connect to a nationwide telephone network through a modular
telephone outlet which is Part 68 compliant.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs. Check with your local telephone company.
2. Notification to the telephone company:
FCC rules require that upon request you provide the following information to the phone
company.
A. The line (telephone number) to which you will connect the telephone equipment, and
B. The FCC Registration Number and Ringer Equivalence Number (REN). These numbers
are found on the back or bottom of your telephone equipment.
The REN is useful to determine the quantity of devices you may connect to your telephone
line and still have all of those devices ring when your telephone number is called. In most,
but not all areas, the sum all RENs should be 5 or less. To determine the number of
devices permitted in your area, contact your local telephone company.
3. Repair instructions:
If it is determined that your telephone equipment is malfunctioning, the FCC requires that
it not be used and be unplugged from the modular outlet until the problem has been
corrected. Repairs to this telephone equipment can be made only by the manufacturer or
its authorized agents, or by others who may be authorized by the FCC. Unauthorized
repairs void registration and warranty.
4. Rights of the telephone company:
If your product is causing harm to the telephone network, the telephone company may
temporarily discontinue your service. If possible, they will notify you in advance. But if
advance notice isn’t practical, you will be notified as soon as possible. You will be given
the opportunity to correct the problem, and you will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the proper functioning of your
telephone equipment. If such changes are planned, you will be notified in advance.
5. This product is compatible with inductively coupled hearing aids.
Note: This applies only if this product is equipped with a corded or cordless handset.
6. Programming/testing emergency numbers:
When programming emergency numbers and/or making test calls to emergency numbers
A. Remain on the line and briefly explain to the dispatcher the reason for the call before
hanging up.
B. Perform such activities in the off-peak hours, such as early morning or late evening.
3
This unit has been tested and found to comply with the limits for a Class B computing device
in accordance with the specifications in subpart J of Part 15 of the FCC rules. These
specifications are designed to provide reasonable protection against such interference in a
residential installation. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause interference to radio or television reception, when it’s in use, the
user is encouraged to try to correct the interference by one or more of the following
measures:
A. Where it can be done safely, reorient the radio or TV receiving antenna.
B. To the extent possible, relocate the television, radio, or other receiver with respect to
the telephone equipment.
C. If your telephone product runs on AC power, plug your product into an AC outlet that’s
not on the same circuit as the one used by the radio or television.
4
BATTERY CAUTIONARY INSTRUCTIONS
BE-3850 PARTS CHECKLIST
BATTERIES: CAUTION
To reduce the risk of fire or injury to persons, read and follow these instructions:
• For the cordless handset, use only a 3.6V 550mAh GP55AAA3BX Nickel Metal
Hydride (Ni-MH) cordless telephone battery pack (included).
• Do not dispose of the batteries in a fire. The cells may explode. Check with local
codes for possible special disposal instructions.
• Do not open or mutilate the batteries. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
• Exercise care in handling batteries in order not to short the battery with conducting
materials such as rings, bracelets, and keys. The battery or conductor may overheat
and cause burns.
• Do not attempt to rejuvenate the batteries identified for use with this product by
heating them. Sudden release of the battery electrolyte may occur causing burns or
irritation to eyes or skin.
1. Handset
2. Base
• When inserting batteries into this product, the proper polarity or direction must be
observed. Reverse insertion of batteries can cause charging, and that may result in
leakage or explosion.
6. 7-foot line
cord for desk use
• Remove the batteries from this product if the product will not be used for a long
period of time (several months or more) since during this time the battery could leak
in the product.
• Do not store this product, or the batteries identified for use with this product, in high
temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage
and defrosting.
3. Headset
4. AC power adapter
5. 10-number
memory card
8. Quick start card
9. Belt-Clip
7. Short line cord for
wall installation
Batteries should be stabilized at room temperature prior to use after cold storage.
The EPA certified RBRC® Battery Recycling Seal on the nickel-metalhydride
(Ni-MH) battery indicates TT Systems LLC is voluntarily participating in an
industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC®
program provides a convenient alternative to placing used Ni-MH batteries into
the trash or the municipal waste stream, which may be illegal in your area.
Please call 1-800-8-BATTERY for information on Ni-MH battery recycling and
disposal bans/restrictions in your area. TT Systems LLC’s involvement in this
program is part of our commitment to preserving our environment and conserving our natural resources.
5
6
10. Ni-MH battery pack
LOCATION OF CONTROLS AND FEATURES
LOCATION OF CONTROLS AND FEATURES
Talk T
The T key is used to access the telephone line or end a call.
Handset
New Call Light
Directory Key d
Use d to program and retrieve the numbers in the speed dial directory.
Delete Key D/CHAN
When viewing or editing menus and logs, the D key is used to erase digits on the
display, and single or multiple entries from the phone book and Caller ID directories.
The D/CHAN key, when pressed while the phone is off-hook, will scan up to 50
channels and select the clearest one to provide the best possible reception.
View Right Key
View Left Key
Option Key #/OPTION
The #/OPTION key is used to change the 7/10/11 digit dialing mode during caller ID
callback.
Dial Pad
Numeric keys are used in the conventional manner for dialing.
Up/Down Key
LCD Display
Talk Key
Delete Key
Directory Key
Headset Jack
Dial Pad
Up/Down Key The key let you scroll through menus and logs. Also used to access Caller ID
information stored in memory.
Redial Key R/SAVE
When the phone is idle or off-hook, press R to redial the last number dialed. The
R/SAVE key is used to save numbers into the phone book and other settings. It is
also used to insert a programmable pause into a number stored in the phone book.
Flash Key F/EDIT
The F/EDIT key is used to access telephone company services, like call waiting.
It is also used to create and edit phone book entries.
Menu Key M/VOICE MAIL
The M key is used to access the handset settings. The M/VOICE MAIL key
can also be programmed to do two-touch dialing of a single number, such as your voice
mail service number.
Temporary Tone
Key
Option Key
Flash Key
Menu Key
Redial Key
Volume Switch
Microphone
7
Temporary Tone Key *
If the base is set to pulse dialing, pressing * causes subsequent digits to be dialed
out using tone until the line is put back on hook.
View Left Key
and View Right Key
Use
to view the left part of the display and move the cursor left when editing. Use
to view the right part of the display and move the cursor right when editing.
Headset Jack
Allows using a headset with a standard 2.5mm plug for hands-free convenience.
Volume Switch (Hi/MID/LOW)
Adjust the switch to select the receiver volume – choose between HI, MID, and LOW.
8
LOCATION OF CONTROLS AND FEATURES
LOCATION OF CONTROLS AND FEATURES
Base
Base Back View
Data Jack
Charge LED
Page Button
Data Jack
Used for connecting a computer or fax machine.
Base Bottom View
Tone/Pulse Switch
Page - Used to initiate a handset page.
Charge LED - Lights when the handset is on the cradle being charged. Lights
when the handset is in use. Flashes when the phone is ringing
or another extension is in use.
Tone/Pulse Switch
Used to set the dialing method for tone or pulse dialing.
9
10
LOCATION OF CONTROLS AND FEATURES
LCD
Display
Name Character Field
Number Field
CHOOSING A LOCATION
Do the following:
• Choose the best location
• Connect the phone
• Choose the dialing mode
Away from VCRs and TV sets and
other electronic equipment
Away from heat sources, such as
radiators, air ducts, and sunlight
Date/Time
Display
New Icon
or Entry
Number
Away from noise sources such as a
window by a street with heavy traffic
RPT or
Total Call
Counter
Away from a
personal computer
Name Character Field
Displays caller’s name and operational menus.
Number Field
The number field will display numbers when dialing, viewing Caller ID, and when
viewing the phone book.
Near a central
location and on a
level surface
Date/Time Display
Shows the date and time of Caller ID calls or current date & time when idle.
Away from a microwave oven
Away from excessive
moisture, extremely low
temperatures, dust,
mechanical vibration, or
shock
NEW Icon
When in idle mode, the NEW call icon will flash slowly when a new Caller ID call
has been received. The number of new caller ID calls is listed next to the icon.
Entry Number
When in any of the menus, a number is listed here. This number indicates the
place in the list, such as the 38th caller ID entry.
RPT Counter
When viewing caller ID entries, the RPT icon indicates that the same Caller ID
number has called more than one time since Caller ID memory has last been
reviewed. Next to the RPT icon is a counter that indicates how many times that
caller has called since the last review.
Total Call Counter
The Total Call Counter will show the total number of Caller ID messages
received, the total number of phone numbers stored in the phone book, etc.,
depending on the display mode.
11
Where you place the phone affects the reception quality of the handset:
• Away from another cordless telephone
• Place the base near an AC electrical outlet and near telephone line jack
• Place the base away from metal walls and metal file cabinets
CAUTION: The cordless telephone operates at a frequency that may cause
interference to nearby TVs and VCRs; the base phone should not be
placed near, or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or
VCR will often reduce or eliminate the interference.
Note:
While the 2.4GHz frequency is inherently clearer, we suggest that
you do not use this phone within 20 feet of a working microwave.
The microwave produces frequencies in this range which may
cause interference. This interference is normal for all 2.4GHz
phones and should not be considered a product defect.
12
TELEPHONE SETUP
TELEPHONE SETUP
Connecting the Base
Wall Mounting
The BE-3850 telephone may be installed onto two screws (not included) fastened into the wall. When installing screws into plasterboard walls, use wall
anchors (not included) to ensure that the screws remain secure. Insert the
screws into the wall leaving 3/16" of each screw extending out from the wall.
See the wall mount template on page 45 to properly space the screws in the
wall for mounting. The BE-3850 is not compatible with mounting on a standard
telephone wall plate.
Wall Mounting Instructions:
1. Remove the handset from the
base.
2. Turn the base over so the underside of the base faces you.
3. Adjust the base to the wall mount
position.
4. Plug the supplied 7-foot telephone
cord into the LINE jack on the
telephone.
5. Connect the telephone line cord
to the wall jack.
1. Connect the telephone line cord to the "LINE" jack and to a telephone outlet.
6. Insert the AC adapter into the 9V
DC jack on the top of the base.
2. Connect the AC power adapter to the 9V DC jack and to an AC outlet.
7. Run the cables down through the cable channel to allow for flush wall
mounting.
Note: Use only the supplied AC power adapter. Do not use any other AC
power adapter. Connect the AC power adapter to a continuous power
supply. Place the phone close to the AC outlet so that you can plug in
the AC power adapter easily.
8. Slip the telephone base onto the wall, lining up the wall mounting holes over
the screws. Slide the telephone base down so it is firmly in place.
Tip:
If your telephone outlet is not modular, contact your telephone company for
assistance.
13
9. Return the handset to the telephone base.
10. Plug the other end of the AC adapter into the AC outlet.
14
TELEPHONE SETUP
BATTERY INSTALLATION
Tone/Pulse Switch
To install the cordless Ni-MH handset battery pack:
1. Choose the correct dialing mode.
2. Select the dialing mode Tone or Pulse by
setting the switch on the bottom of the
base unit.
Note: Changes to the switch position
during a call do not take effect until
the call has ended.
Tone/Pulse
Switch
Tip:
If you are unsure of the proper dialing mode, make a trial call with the dial
mode setting to TONE. If the call connects, leave the switch as is (TONE
mode), otherwise, set to PULSE.
NOTE: Pulse dialing works for direct dialing and redialing only, not for memory
dialing.
1. Slide the battery pack up into the compartment at the
bottom of the handset. Make sure that the end of the
battery with the contacts is inserted first.
2. Snap the battery compartment cover into place.
3. Place the handset on the charging cradle.
4. Once you have installed the battery pack and placed
the handset on the cradle you will hear a tone
indicating the handset has connected with the charging
contacts and will successfully charge.
5. IMPORTANT: Charge the battery pack for at least 12
hours before using the handset the first time.
6. The IN USE/CHARGE LED on the charging cradle will
light when the handset is properly making contact with
the charge terminals.
Handset Volume
Note: Ringer options can be selected on the
handset when programming setup
functions (see page 22).
Volume Control
Switch
HI MID LOW
Adjust the receiver volume of the handset using
the volume control switch on the right side of
the handset.
Battery Duration
A fully charged battery lasts for approximately:
• 4 hours when you use the handset continuously (talk
time).
• 5 days when the handset is not in use (standby).
When the Battery Needs Charging
• The phone will beep.
• The display will show the Low Battery icon.
When to Purchase a New Battery Pack
If the battery lasts only a few minutes even after a full charge, the usable life of the
battery has expired and needs to be replaced. For replacement batteries
visit http://www.bell-equipment.com/support or
you can contact Aastra Telecom customer support center
at 1-888-663-1505 for information about how to order a new battery.
15
16
HEADSET AND DATA JACK
BASIC DISPLAYS
The Data Jack
Handset Idle (after time is set)
New CID Received
Line Ringing
Message Waiting
Off-hook
Extension In Use
The jack located on the side of the
telephone labeled "DATA" is a
convenience jack. It is useful for
connecting a fax machine or modem when
there is no telephone jack available for
that device.
Data Jack
The Headset Jack
The headset jack is located on the side of the
handset and is a standard 2.5mm plug. Simply
plug the headset into the jack and the headset
will be active.
Talk
1
Note: When the headset is plugged into the
telephone, the microphone and earpiece
on the handset are not active.
4 GHI
7 PQRS
DIR
2 ABC
5 JKL
8 TUV
Delete
CHAN
3 DEF
6 MNO
9 WXYZ
Call Timer
Belt-clip
Headset Jack
Belt-Clip
Be sure to remove the belt-clip filler cap prior to installing the
belt-clip. Install the belt-clip as shown.
To remove the belt-clip, squeeze the release at the top of the
clip where it attaches to the phone, and gently pull the clip up
and out of the handset.
17
18
BASIC OPERATION
Making Calls
BASIC OPERATION
Redialing
1. Pick up the handset and press T.
1. Press T.
2. Wait until you hear a dial tone and then dial the
number you wish to dial. The call timer will begin.
2. Wait until you hear the dial tone and then press
R to redial the number last dialed (up to 32
digits).
Tip:
It is also possible to pre-dial the number, by dialing the
number prior to pressing the T key. The number
displayed will be dialed once T is pressed.
3 When you are finished talking, press the T key or
place the unit back into the base to end the call.
Additional Options
Receiving Calls
When you hear the phone ring:
1. The display will show “RING.” If you have Caller ID,
the display will show the Caller ID information after the
first ring.
To:
Adjust the volume in the earpiece
Do This:
Adjust the volume control switch on the right side of the
handset to the desired volume level.
Switch to temporary tone dialing
Press the * key after the phone is in use. The phone will
remain in tone dialing mode for the duration of the call.
Receive a call waiting call
Press F to go to the new caller.
Press F again to go back to the original caller.
2. With the handset in or out of the base, push T. The
call timer will start.
3. When you are finished, push T or place the handset
back in the base.
19
20
SETTINGS
SETTINGS
Handset Settings
Key
You can change the setting on the handset in the options
menu. Access the options menu by pressing and holding
the M key.
8 Pause Time: Allows you to adjust the number of seconds that a pause
lasts such as during programmed pauses in your speed dial numbers or
after your PBX number is dialed.
There are 11 settings in the options menu which can be
changed. You can scroll through the option menu in the
listed order by pressing the key. Settings can be
reached directly by pressing that number on the keypad.
To edit a setting, press the F/EDIT key, use the key to toggle between the setting options, and then press
and hold R/SAVE to save changes. You can continue
programming options by using the dial pad keys or the key to go to a new setting. Press M to exit the
options menu.
Key
3
9 Voice Mail: The programmed one-touch number designed to enable easy
access to voice mail service provided by your telephone company.
Key
DIR
Delete
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Talk
Menu Key
Flash/Edit
Key
Function
CHAN
0 MSG Waiting Delete: Clears any current message waiting indication.
* Area Code: Allows the programming of a home area code where 7-digit
dialing is used for ease of callback and other features (do not program if
you use 10-digit dialing to call numbers in your area).
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
Redial/Save
Key
Function
1 Ring Hi/Low/Off: Change the volume of the ringer on the handset or turn
the ringer off.
2 Language: Change the language that appears on the display. Choose
between English, French, and Spanish.
3 First Ring On/Off: Turn the first ring of the phone off so that it does not
ring until caller ID information has been displayed. Particularly useful
when using the priority and blocked call features or the private and
unavailable ring settings.
4 Time Set: Change the time and date.
5 Contrast: Adjusts the display background lighter or darker.
6 PBX Number: Determines if a “PBX Number” is used before an outgoing
number is dialed. Select a number (0-9) which is necessary to dial out
when using a switchboard system, and the phone will automatically dial
the PBX number and a pause before any speed dial or caller ID callback
number. Default setting is “Off.”
Note: At any time during options programming you can quit and the settings
that you have changed will be saved. Press M to quit the options
menu or let the options programming time out by not pressing any keys
for 20 seconds.
Setting the Ringer Level
1. Press the M key to enter the menu.
3
2. Press F/EDIT to change the setting. “HI” will
begin flashing.
Talk
DIR
Delete
CHAN
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
3. Use the key to toggle between HI, LOW, and
OFF.
4. When the setting you desire is displayed, press and
hold R/SAVE to save the setting. A long beep
will sound to confirm the setting has been saved.
5. Continue with programming or press M to return
to the idle screen.
7 Flash Time: Allows you to adjust the flash time to accommodate the
phone service in your area.
21
22
SETTINGS
Changing the Language
SETTINGS
Setting the Time and Date
1. Press the M key to enter the menu.
1. Press the M key to enter the menu.
2. Press 2 to go to the language programming option.
2. Press 4 to go to the time set programming option.
3
3
3. Press F/EDIT to change the setting. “ENGLISH”
will begin flashing.
Talk
1
DIR
Delete
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Option
DIR
Delete
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Talk
CHAN
2 ABC
3. Press F/EDIT to change the setting. The month
will begin flashing.
4. Use the key to toggle between ENGLISH,
ESPANOL, and FRANCAIS.
5. When the setting you desire is displayed, press and
hold R/SAVE to save the setting. A long beep
will sound to confirm the setting has been saved.
1
CHAN
Flash
Redial
Menu
Flash
Redial
Voice Mail
Edit
Save
Voice Mail
Edit
Save
Turning the First Ring On or Off
1. Press the M key to enter the menu.
2. Press 3 to go to the first ring programming option.
5. Use the dial pad to enter the date. The hour will begin
flashing.
Option
Menu
6. Continue with programming or press M to return
to the idle screen.
4. Use the dial pad to enter the month. The date will
begin flashing.
6. Use the dial pad to enter the hour. The minutes will
begin flashing.
7. Use the dial pad to enter the minutes. AM and PM
begin flashing.
8. Use the dial pad to choose between AM and PM,
where 1 is AM and 2 is PM.
9. When the setting you desire is displayed, press and
hold R/SAVE to save the setting. A long beep
will sound and you are returned to the options menu.
3
3. Press F/EDIT to change the setting. “On” will
begin flashing.
DIR
Delete
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7
8 TUV
9 WXYZ
0
#
Talk
1
PQRS
*
10.Continue with programming or press M to return
to the idle screen.
CHAN
4. Use the key to toggle between On and Off.
5. When the setting you desire is displayed, press and
hold R/SAVE to save the setting. A long beep
will sound to confirm the setting has been saved.
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
6. Continue with programming or press M to return
to the idle screen.
23
24
SETTINGS
Adjusting the Contrast
SETTINGS
Changing the Flash Time
1. Press the M key to enter the menu.
The contrast is optimized for viewing and will probably not need to be changed
from the default setting. It will adjust the display background lighter or darker.
1. Press the M key to enter the menu.
2. Press 5 to go to the contrast programming option.
2. Press 7 to go to the flash time programming
option.
3
3. Press F/EDIT to change the setting. “600” will
begin flashing.
3
DIR
Delete
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
Talk
*
CHAN
0
#
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
DIR
Delete
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Talk
3. Press F/EDIT to change the setting. “3” will
begin flashing.
4. Use the key to toggle between the three levels of
contrast.
5. When the setting you desire is displayed, press and
hold R/SAVE to save the setting. A long beep
will sound to confirm the setting has been saved.
CHAN
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
6. Continue with programming or press M to return
to the idle screen.
Setting the PBX Number
1. Press the M key to enter the menu.
4. Use the key to select the desired dialing delay.
5. When the setting you desire is displayed, press and
hold R/SAVE to save the setting. A long beep
will sound to confirm the setting has been saved.
6. Continue with programming or press M to return
to the idle screen.
Note: The standard and default flash time setting is 600msec.
This is the setting you should use to access standard
telephone services such as call waiting. This setting is
adjustable to allow for PBX and other special uses.
Changing the Pause Time
1. Press the M key to enter the menu.
2. Press 6 to go to the PBX number programming
option.
2. Press 8 to go to the pause time programming
option.
3
3
3. Press F/EDIT to change the setting. “OFF” will
begin flashing.
Talk
1
4 GHI
7 PQRS
*
DIR
Delete
CHAN
2 ABC
5 JKL
8 TUV
0
3 DEF
6 MNO
4. Use the key to customize the digit to match your
PBX system. When not connected to a PBX, the
phone will only function normally when set to “OFF.”
Talk
1
4
DIR
Delete
2 ABC
3 DEF
CHAN
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
GHI
9 WXYZ
#
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
5. When the setting you desire is displayed, press and
hold R/SAVE to save the setting. A long beep
will sound to confirm the setting has been saved.
6. Continue with programming or press M to return to the idle screen.
25
3. Press F/EDIT to change the setting. “2” will
begin flashing.
4. Use the key to select the desired dialing delay.
5. When the setting you desire is displayed, press and
hold R/SAVE to save the setting. A long beep
will sound to confirm the setting has been saved.
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
6. Continue with programming or press M to return
to the idle screen.
26
SETTINGS
Programming One-Touch Voice Mail Dialing
SETTINGS
Setting the Area Code
1. Press the M key to enter the menu.
1. Press the M key to enter the menu.
2. Press 9 to go to the auto answer programming
option.
2. Press * to go to the area code programming
option.
3
3
Talk
DIR
Delete
Talk
CHAN
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9
*
0
#
4. Use the dial pad to enter the phone number used to
access your voice mail messages (up to 15 digits).
Press R to insert a dialing pause.
WXYZ
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
3. Press F/EDIT to change the setting. “---” will
begin flashing.
3. Press F/EDIT to enter your voice mail speed dial
number.
5. When the phone number you desire is displayed,
press R/SAVE to save the setting. A long beep
will sound to confirm the number has been saved.
6. Continue with programming or press M to return
to the idle screen.
1
DIR
Delete
2 ABC
3 DEF
CHAN
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
4. Use the dial pad to enter the three digit area code that
your phone number begins with.
5. When the setting you desire is displayed, press and
hold R/SAVE to save the setting. A long beep
will sound to confirm the setting has been saved.
6. Continue with programming or press M to return
to the idle screen.
Deleting Message Waiting Indication
1. Press the M key to enter the menu.
2. Press 0 to go to the message waiting programming
option.
3
Talk
DIR
Delete
3. Press F/EDIT to reset the message waiting indication. “DEL” will begin flashing.
CHAN
1
2
ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
4. Press R/SAVE to delete the indication. A long
beep will sound to confirm.
5. Continue with programming or press M to return
to the idle screen.
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
27
28
SPEED DIALING
The BE-3850 will store up to 40 speed dial numbers in alphabetical order. No
duplicate numbers can be stored.
SPEED DIALING
Letter Table
Storing Phone Numbers
1. With the handset in the idle state, press d.
3
2. Press F/EDIT to create a new phone book entry.
Talk
1
DIR
Delete
2 ABC
3 DEF
CHAN
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
3. Enter the name you wish to store using the dial pad to
enter the letters (up to 18 letters). See the following
letter table for how to program the letters using the
number pad. To move the cursor to the right, such as
to enter a new letter, push .
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
1st
2nd
3rd
Press Press Press
Space
1
&
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
T
U
V
W
X
Y
0
0
0
Key
1
2
3
4
5
6
7
8
9
0
J
o
h
n
5th
Press
(
b
e
h
k
n
p
u
w
0
6th
Press
)
c
f
i
l
o
q
v
x
0
7th
Press
.
2
3
4
5
6
r
8
y
0
8th
Press
Space
A
D
G
J
M
s
T
z
0
9th
Press
1
B
E
G
K
N
7
U
9
0
Viewing the Phone Book
1. Press d to enter the phone book.
Example: For JOHN SMITH dial this sequence:
5 666666 44444 66666
4th
Press
’
a
d
g
j
m
S
t
Z
0
1
7777 6666 444444 8888 44444
space
S
m
i
t
h
3
4. Press , and dial the number you wish to store (up to
22 digits). Press R to insert a dialing pause into
the number.
Talk
5. Press and hold R/SAVE when finished to store
the number into memory.
Note: If there are no memory locations left in the speed dial directory the
BE-3850 will display "MEMORY FULL." To continue with memory
programming, you must delete or edit existing speed dial numbers.
Note: If you mis-type entering the phone number, you can move through the
number and edit it by pressing
or . To delete a character or number
inside the cursor, press the D key.
29
DIR
Delete
CHAN
1
2
ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
2. Press a dial pad key which corresponds to the first
letter of the name (a triple beep will sound if no entries
are stored under those letters). Use to locate the
exact number you wish to view.
3. If the name or number is more than 11 characters,
press the
or
button to view the rest of the display
(as indicated by the arrows in the top line of the
display).
4. Press d to exit the phone book, or let the phone
book time out.
30
SPEED DIALING
SPEED DIALING
Making Calls From the Phone Book
Deleting a Stored Number
1. Press d.
1. To make a call from the phone book, press d.
3
Talk
DIR
Delete
CHAN
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8
9
*
0
TUV
WXYZ
2. Locate the number you wish to dial by pressing a dial
pad key which corresponds to the first letter of the
name. Use to locate the exact number you wish
to dial.
2. Locate the number you wish to delete using .
3
DIR
Delete
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Talk
1
3. Push T. The display will show the directory name,
and begin dialing the number.
#
Option
CHAN
Option
Menu
Flash
Redial
Menu
Flash
Redial
Voice Mail
Edit
Save
Voice Mail
Edit
Save
3. Press D. The display will show “ERASE
ITEM?”
4. Press D to delete the phone book memory.
5. When you are finished press d.
4. When you are finished with your call, press T, or
place the handset back on the base.
Note: Be sure to check that the line is not in use by another extension.
Priority Calls
Editing a Stored Number
3
Talk
DIR
Delete
CHAN
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
1. Press d.
You can assign stored numbers as priority calls. When an incoming call is
matched to a stored number designated as priority, the phone will generate a
special ring sound after caller ID information is received.
2. Locate the number you wish to edit.
To mark a phone book entry as priority, add a “#” mark at the
beginning of the name during programming or editing.
3. Press F/EDIT. The entry will display with a
flashing prompt over the first character.
Blocked Calls
4. Move the cursor to the section you wish to edit using
the , , , and
keys. Characters or numbers will
be inserted in front of the cursor.
5. To erase a character or digit, press the D key.
If you do not want to have the phone ring when a specific number calls, you can
store that number in the phone book and assigned it as blocked. When an
incoming call is matched to a stored number designated as blocked, the phone
will not ring after caller ID information is received.
To mark a phone book entry as blocked add a “*” mark at
the beginning of the name during programming or editing.
6. When the entry is edited as you desire press and hold
R/SAVE to store the edited entry.
31
32
CALLER ID
Caller ID allows the caller's name and phone number to be shown on the display
before you answer the call. In order to use this feature you must first subscribe
to Caller ID service with your telephone company.
CALLER ID
Caller ID Displays
Display shows name and number, time and date of the call.
When You Receive a Call
1. When the telephone rings, the caller's name and
phone number appears on the display.
2. The new Caller ID record includes the name and number of the caller and
the time and date the record is received. The New Call light will flash to
indicate that you have a new Caller ID call stored in memory.
Note: When the Caller ID information is received, it is stored in memory so that
this information can be recalled for later use. Up to 80 Caller ID calls
can be stored.
Viewing the Caller ID List
This phone automatically stores the last 80 calls received. If a call is received
from the same number more than once since the records were last viewed, no
new entry is made, but the repeat call icon (“RPT”) and the number of repeat
calls is displayed.
1. With the handset idle press or .
2. Any unviewed (new) calls will be displayed first. The
most recent call will be displayed. The information on
the call will be displayed with the name, number, date,
and time that the call was received.
3
DIR
Delete
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Talk
CHAN
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
3. To scroll to the next call, press or . The will go
through the calls from the last call received to the first.
The will allow you to view the calls from the first call
received to the last.
4. If the name or number is more than 11 characters,
press the
or
button to view the rest of the display
(as indicated by the arrows in the top line of the
display).
5. Press d to return to the idle display.
33
Display shows number-only service.
"UNAVAILABLE" will be displayed when Caller ID
information is not available. This call was made from a
telephone company that does not offer Caller ID services
(including international calls).
"PRIVATE" will be shown when a call is received from a
blocked number. For privacy reasons, some states allow
callers the option to prevent their telephone data from
being displayed on the other party's Caller ID display.
Display shows when the Caller ID information was received
incorrectly or only part of the data was received.
Note: When an error is received, none of the data from
this call is saved in memory.
Display shows when a voice mail message has been
received and is stored by message waiting service
provided by the phone company.
This is displayed when or is pressed and there is no
Caller ID data stored.
34
CALLER ID
CALLER ID
Caller ID with Call Waiting Service
Deleting Caller ID Records
In order to use the "Call Waiting Caller ID" service you must subscribe to a
telephone company that offers Caller ID service combined with "call waiting"
service.
When viewing the Caller ID information you can delete a single call record or all
the call records.
When a new call comes in while you are talking, you
will hear a notification beep from the handset and
the volume is momentarily muted. The new caller's
name and phone number, if available, appears on
the display. An “L2” in the lower right hand corner
indicates the call waiting caller ID caller so you can
keep track of who you are talking to.
To Delete a Single Record
1. Use to scroll to the call record you wish to delete.
3
2. Press D.
DIR
Delete
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Talk
1. When you receive a "call waiting" call and you want to connect the call, press
F. The active call will be placed on hold and the new call will be active.
2. Press F to alternate between calls.
3. Press T to end the call or place the handset back on the base.
CHAN
3. To delete the record press D. The display will
show “ERASED”
4. Press d to exit the Caller ID log.
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
Storing Caller ID Records
1. Use to scroll to the call record you wish to store
into the phone book.
To Delete All Records
1. Press or .
3
3
2. Press and hold D.
2. Press and hold R/SAVE.
Talk
DIR
DIR
Delete
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Talk
Delete
CHAN
CHAN
1
2 ABC
3
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
DEF
3. The display will show “SAVED.”
4. If you wish to edit the newly stored number, edit it in
the phone book (page 31, “Editing a Stored Number”).
3. To delete all the Caller ID records press D. The
display will show “ALL ERASED” and then return to
the idle display.
Option
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
5. Press d to return to the idle display.
Note: When numbers are stored into the phone book, a “1”
is inserted in front of the number. If you must dial a
10-digit number for local calls, you must edit the
number to exclude that digit to dial out correctly.
35
Menu
Flash
Redial
Voice Mail
Edit
Save
36
CALLER ID
Returning Caller ID Calls
You can return calls by using the Caller ID callback feature.
1. Use the to scroll to the call record you wish to
call back.
3
DIR
Delete
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
*
0
#
Talk
CHAN
2. If the number displayed is not correct (needing 7, 10,
or 11 digits), use the #/OPTION key to toggle the
number to display the correct number of digits to be
dialed.
MESSAGE WAITING
If you subscribe to voice mail from the telephone
company and if there are voice messages that
have been left in your voice mailbox, the display
will show "MSG WAITING.”
Note: This function requires voice mail subscription from the local telephone
company. Furthermore, the local phone company must provide a type of
voice mail signaling called "FSK” (Frequency Shift Key). Not all
telephone companies have the visual message waiting feature available.
Please contact your local telephone company to check if this is available
in your area.
Tip:
Press #/OPTION
If you wish to delete the "Message Waiting" message, delete them as described
in the handset settings section “Deleting the Message Waiting Indication” (see
page 27).
Option
Menu
Flash
Redial
Voice Mail
Edit
Save
Press #/OPTION
3. Press T to dial out the displayed number.
4. Press d to cancel dialing.
5. To end the call, press T, or place the handset back
in the base.
Using the One-Touch Voice Mail Dialing
When the setting is programmed in the options menu (see “Programming OneTouch Voice Mail Dialing” on page 27) you can dial out a programmed number at
the touch of a button. This feature is specifically designed to easily check voice
mail when you have that service through your telephone company.
1. Press T to access the telephone line.
2. Press M/VOICE MAIL.
3. The phone will begin dialing the number.
New Call Light
When you receive a Caller ID message, voice mail message, or when the phone
is ringing, the New Call light will flash accordingly.
New Call Light
• For Caller ID, the New Call light will flash
to indicate that you have a new Caller ID
call stored in memory.
• When you have a voice message waiting
the New Call light will flash at a slow
rate.
37
38
OTHER FEATURES
CARE AND MAINTENANCE
Using the Handset Finder (PAGE)
1. Press
PAGE
on the base and the phone will beep.
If the handset is within
range, it will beep until a
key is pressed.
2. Press any key on the handset, or place the handset in the base to stop the
page/find feature.
Out-of-Range Warning
If you venture too far from the base, the handset will beep. Reverse your
direction to re-establish connection with the base or the call will be dropped.
When the base detects that the handset has been out of range for 20 continuous seconds it will release the engaged line.
Your BE-3850 telephone has been designed to give years of trouble-free
service. It is a sensitive electronic instrument. To assure its longevity, please
read the following maintenance instructions.
1. Keep the BE-3850 away from heat as high temperatures can shorten the life
of the electrical components and distort or melt its plastic parts.
2. The BE-3850 should be kept free of dust and moisture. If it gets wet, wipe it
dry immediately. Liquids can contain minerals that can corrode electronic
circuits.
3. Handle your BE-3850 gently and carefully. Dropping it can cause serious
damage to circuitry, or the plastic case, which may result in malfunction.
4. Do not use any type of chemical or any abrasive powder to clean the cabinet.
Use only mild detergents on a soft, damp cloth to clean the BE-3850
telephone.
5. The BE-3850 has built-in surge protection circuits that meet or exceed FCC
requirements. However, an incident such as a lightning strike at or near the
telephone lines, could cause serious damage.
Channel Changing
If you are experiencing interference during a telephone call, press the
D/CHAN key. The BE-3850 will scan up to 50 channels and select the
clearest one to provide the best possible reception.
Extension In-Use
The BE-3850 is capable of detecting when another phone
that is connected to the same phone line is being used. In
this situation, the display will show “EXT IN-USE” and the
Private Call indicator will blink on the LCD screen. You will
have to wait until the line is free to make a telephone call.
6. If the BE-3850 is installed in an area with frequent or severe electrical
storms, it is suggested that the telephone be disconnected during these
storms or that additional surge suppression equipment be added to the
installation.
7. In the case of trouble with the telephone, do not attempt to repair the
telephone yourself. It is the responsibility of users requiring service to report
the need for service to our Service Department. They will make the
necessary arrangements for repair or replacement.
If, during a conversation, the base IN USE LED begins to blink, an extension
phone has gone off-hook.
8. If you should have any questions about the operation of your BE-3850
telephone, please call our Service Department at 1-800-276-5844. Or you
may contact TT Systems LLC for technical assistance via our Internet Web
site: www.ttsystems.com or e-mail: [email protected].
Note: If the telephone line cord is not connected to the wall jack and the
telephone base, the display will also indicate “EXT IN-USE.”
9. Please register your product online at
www.ttsystems.com/CustomerSupport/RegOnline.asp
39
40
TROUBLESHOOTING
No dial tone/phone will not dial out.
• Check that the AC power adapter is plugged into a working AC power outlet.
• Check all telephone cord connections or try another wall jack.
• Do a basic reset of the phone: Disconnect the phone from the wall and
remove the battery. Leave for 30 minutes and then re-install as instructed by
the manual.
All the display segments stay on when the handset is in the base.
• Verify that the battery is properly installed.
• Remove the battery and clean the battery contacts using a pencil eraser.
TROUBLESHOOTING
Can't receive or make phone calls.
• Make sure the phone is set to the correct type of service, either Tone or
Pulse.
“EXT. IN-USE” shows on the display.
• This usually displays when someone is on the line. You will have to wait until
the line is free to make a telephone call.
• Verify that the telephone line cord is securely connected to the wall jack and
the telephone base.
Can’t hear the ring signal.
• Check the ringer volume controls; at the lowest level the ring may not be heard.
While on a call, you hear another call on the line or experience radio
frequency interference.
• Switch channels to a clear channel.
• Check the wiring for bad connections.
• Do not use this phone within 20 feet of a working microwave. The microwave
produces frequencies in this range which may cause interference. This
interference is normal for all 2.4GHz phones and should not be considered a
product defect.
The caller’s name and/or phone number does not appear on the display.
• Make sure you have subscribed to Caller ID service (from local telephone
company).
• Caller ID service may not work when the phone is connected to a Private
Branch Exchange (PBX).
• The caller has requested that their phone number be suppressed from Caller
ID service, or caller ID service is not available in their area. "Private" or
"Unavailable" will appear on the display.
• You answered the call before Caller ID data was displayed, which usually
occurs after the first ring.
New Call/Message Waiting Indicator doesn’t work properly.
• Make sure you have subscribed to voice mail compatible with "FSK" type
signaling (check with your local phone company). Verify that both the “On”
and “Off” signals are activated. If your voice mail product from the local
phone company does not support "FSK" signaling, you may use this feature
as a New Call Indicator only.
41
42
WARRANTY
GLOSSARY
Aastra Telecom
A. Aastra warrants that the BE-3850 sold by Aastra within the continental limits of the
United States, Hawaii and Alaska, is free from defects in materials and workmanship
under normal use and service for 1 year. This warranty is applicable only to the original purchaser of the BE-3850, when accompanied by a sales receipt stating the date
of purchase and name of the company from which purchased. This warranty is in lieu
of and excludes all other warranties, expressed or implied, including any implied
warranty of merchantability or fitness, and of any other obligation on the part of
Aastra.
B. If the BE-3850 shall prove to be defective, then Aastra shall either replace or repair
the BE-3850 at its discretion. Warranty service for your BE-3850 is provided by
Aastra Telecom
For Warranty Service
For Please Call 888-663-1505
You will be responsible for shipping charges, if any. When you return this telephone
for warranty service, you must present proof of purchase.
C. There is no informal dispute settlement mechanism available.
D. Some states do not allow limitations on how long an implied warranty lasts and/or do
not allow the exclusions or limitations of incidental or consequential damages, so the
above limitations or exclusions may not apply to you.
E. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
F. This warranty does not extend to any BE-3850 sold by Aastra which has been subjected to misuse, neglect, accident, improper application, improper installation or to
use in violation of the instructions furnished by Aastra. This warranty does not extend
to or apply to any BE-3850 which has been repaired or altered by any persons who
have not been expressly approved by Aastra.
G. Aastra shall not be liable for any special or consequential damages or for loss or
expense directly or indirectly arising from use of the products or any inability to use
them either separately or in combination with other equipment or product accessories
or from any other cause.
H. Aastra reserves the right to make changes in the design of the BE-3850 and to make
additions or improvements to the BE-3850 without incurring any obligation to modify
any BE-3850 previously sold.
43
44
WALL MOUNT TEMPLATE
2 3/4”
Fasten the screws leaving 3/16” of the screw extending from the
wall.
For Support Please Call
1-888-663-1505
Place this template on the wall. The location of the screws is
indicated by the centers of the crossed lines.
Remove This Page to Mark Wall
Screws needed for
wall mounting:
Expansion
Anchor
45
#6 or #8 Pan Head
Self Tapping Screw
46