ABB MicroFlex e150 Servo Drive Quick installation guide

Below you will find brief information for drive MicroFlex e150. The MicroFlex e150 drive is a high-performance servo drive that offers a wide range of features and capabilities, including safe torque off, analog inputs, and various types of encoder feedback. To control the drive, you need a 24 V DC supply, as well as an Ethernet based EtherCAT connection or USB communication. You can also connect a brake resistor to the drive.

PDF Download
Document
ABB drive MicroFlex e150 Quick installation guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Mechanical installation
  • Cooling requirements
  • Connection diagram
  • AC power, fuses, and filter
  • Brake resistor
  • Motor outputs
  • Control supply
  • Safe Torque Off inputs
  • Motor feedback

Frequently asked questions

The 3 A model requires no additional cooling. The 6 A model requires additional forced air cooling at 1.0 m/s or greater. The 9 A model requires additional forced air cooling at 2.5 m/s or greater.

A brake resistor can be used to dissipate excess power from the internal DC bus during motor deceleration.

The MicroFlex e150 can operate with incremental, SSI, EnDat, or SinCos encoder feedback devices.
Preparing document for printing…
0%