Lenco SCD 42 portable stereo FM radio Instruction manual

Below you will find brief information for portable stereo FM radio SCD 42. The SCD 42 is a versatile audio system with a built-in CD player, cassette player, and FM radio. You can listen to your favorite music on CDs, tapes, or radio stations., or enjoy private listening with headphones. The SCD 42 also features a clock and a program function for CD playback.

PDF Download
Document
Lenco SCD 42 Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • CD player
  • Cassette player
  • FM radio
  • Clock
  • Program function for CD playback
  • Headphone jack
  • Telescopic antenna
  • AC power and battery operation

Frequently asked questions

You can adjust the volume using the VOLUME control knob. Rotate the knob clockwise to increase the volume, and counter-clockwise to decrease it.

1. Press and hold the PROG / CLOCK-ADJ./PLAY MODE button. 2. Press the NEXT or BACK button to select 12 hours or 24 hours display. 3. Press the PROG / CLOCK-ADJ./PLAY MODE button, the hour digit will flash. 4. Press the NEXT or BACK button to adjust the hour digit. 5. Press the PROG / CLOCK-ADJ./PLAY MODE button, the minute digit will flash. 6. Press the NEXT or BACK button to adjust the minute digit. 7. Press the PROG / CLOCK-ADJ./PLAY MODE button again, the correct time is shown on the display.

1. Press the "PROGRAM" button. 2. Press the "NEXT" and "BACK" buttons to select the desired track number. 3. Press the "PROGRAM" button again to memorize the track. 4. Repeat steps 2 and 3 until all desired tracks are programmed. 5. Press the "PLAY/PAUSE" button to start.
Preparing document for printing…
0%