EtherNet/IP to Profinet IO
Connect an EtherNet/IP Scanner to a Profinet IO
Support for Up to 10
The 460ESPS moves data between an EtherNet/IP Scanner and a Profinet IO
Controller. It’s the perfect tool to bridge the gap Siemen controllers and AllenBradley PLC’s.
Scanners; 1 Scanner
Capable of Reading
and Writing I/O
Map Data from up to 10
Profinet IO Slots in
Supports 480 Bytes of
Data in Each Direction
Map EtherNet/IP Data
Directly to Profinet
no programming software is required
Simple data translation
allows you to manipulate data as it passes
How Do You Map the Data?
EtherNet/IP IO data will be mapped into 10 Profinet IO slots. Each Slot will be assigned a
typed of Int8, int16, int32, int64, Uint8, Uint16, Uint32, Uint64, float, double, binary8, binary16, binary32 or Short String. The Slot can consist of up to 480 bytes of data from your
Ethernet/IP Scanner device.
When writing from your Profinet IO Controller to your EtherNet/IP Scanner there will be up
to 10 Slots each defined by the same types. Data in those slots can be mapped to your
It’s really that simple. Need to modify your data as it passes from one protocol to the other? No problem. Each data mapping you apply can be modified with up to 3 mathematic
functions. Add 4 to a value, multiply by 4 and divide by 10 with ease.
Why Use Real Time Automation as a Gateway Supplier?
The 460ESPS provides an option to connect an EtherNet/IP Scanner to a Profinet IO Controller. While there are certainly a number of other companies offering stand alone gateways, there is no one who provides the level of support and service that you receive from
When you call, a live person answers the phone. When you talk with sales, you will get
honest answers and recommendations even if that means recommending someone else's
solution. When you get support, it is from an engineer who had a hand in the product’s
development, and support doesn't require a ticket or 24 hour wait. We are unashamed of
the fact that we are a smaller company because that means you mean a lot more to us.
Try the RTA difference today and give us a call at 1-800-249-1612 or check out more information on us and our other solutions at www.rtaautomation.com.
A Word from our Founder
“It’s likely that your business isn’t industrial networking and it shouldn’t be. You make products, design systems, or manage some process. Whatever it
is that you make, monitor or install the process inevitably creates data. If you’re a control engineer and your plant has been around for a few years your
line is probably littered with devices that send out all kinds of data over many different protocols. If you’re an automation device developer you probably
have customers that need to move your data into some other network. Either way, you’ve got a device conversion problem. You have devices that generate ASCII , Modbus RTU, Modbus TCP, BACnet, Profinet, Profibus, Ethernet TCP/IP , Ethernet/IP, DeviceNet or some other completely proprietary
data and now you’re the person that has to move that data to some other network!
I feel your pain… and rather than just my sympathy, I have a solution for you. You see, while your business may not be moving data around a factory
floor mine is. In fact, it’s all that we have done for over twenty years now. Our 460 series of Device Converters is the culmination of those twenty years.
You can now move all of your data, where you want, when you want and how you want. Try us on your next project, I guarantee you wont regret it.
ETHERNET/IP ADAPTER FEATURES
Class 1 I/O Adapter
Implicit Class 1 Cyclic I/O, Explicit Class 3 and UCMM Supported
BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double
Maximum EtherNet/IP Scanner Devices
Up to 10 can listen, only 1 can write I/O
Maximum Data Supported
Up to 480 bytes in each direction
Profinet IO SERVER FEATURES
Maximum Number of Slots
10 Slots in, 10 Slots out
8, 16, 32, 64 or 128 Bytes
Each Slot Can be Defined for a Single Data Type of
Int8, int16, int32, int64, UInt8, Uint16, Uint32, Uint64, float, double, binary8, binary16 or binary32, Short String
Total Data Supported in Each Direction
Maximum Profinet IO Controller Connections
INCLUDED WITH GATEWAY
120 volt AC wall wart power supply
6’ power cable with flying leads
5 year hardware warranty
IPSetup software — automatically locates RTA gateway on the network
Unlimited firmware feature upgrades for life
CAT5 crossover cable for direct connection to PC during programming
Complete, unlimited access to our industry leading support staff
DC Input Voltage
8 VDC @ 230 mA to 28 VDC @ 80 mA
Maximum Baud Rate
-40 C to 85 C
RoHS-Compliant, UL, CUL, CE Approvals, Class I Div 2
ENCLOSURE / HARDWARE
4.2” x 3.25” x 1”
Din rail or panel mount
Ethernet link/data LED, Ethernet speed LED, power LED, &
2 general purpose LEDS on side
GATWAY FEATURES & FUNCTIONS
You can configure up to 9 different users access to
diagnostic and configuration screens.
Set <, <=, >=, >, ==, !=, and change-of-state rules on
any data moving through the gateway. If alarm rule is
triggered an email notification can be sent.
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur
in the gateway.
Protocol specific status, counters and error messages
are accessible within the gateways diagnostics page.
They can also be delivered to a connected device.
Allows users to see and log start up sequences, protocol specific messages & error messages.
NOT EXACTLY WHAT YOU WERE LOOKING FOR?
Real Time Automation offers a full line of gateway products. If this isn’t the one
you were looking Give us a call at 1-800-249-1612 or check out a listing at
www.rtaautomation.com/products. We also offer custom gateways to help customers dealing with unique needs or proprietary protocols.
EtherNet/IP Scanner to Profinet IO Gateway
For More Information:
2014 Copyright Real Time Automation. All rights reserved. The Real Time Automation logo is a registered trademark of Real Time Automation Inc.