Zanussi | ZWD 853 | Installation guide | Zanussi ZWD 853 Installation guide

WASHER-DRYER
ZWD 1272 W
ZWD 1472 W
ZWD 1472 S
On/Off
JETSYSTEM
1 2 0 0 6 kg
Cotton Daily
Cottons
Synthetics
Delicate
Wool/
Handwash
Fabrics
95°C
60°C
50°C
40°C
30°C
Temperature
1200
900
700
500
Rinse Hold
Spin Speed
Prewash
40° AA
Extra Quick
Options
Delay
Cottons
Extra Dry
Store Dry
Iron Dry
Synthetics
Store Dry
Cottons
Synthetics
Start/Pause
Auto Dry Drying Time
Skip
ZWD 1272 W
Prewash
Wash
Rinse
Spin
Drain
Drying
Reset
Quick Installation Guide:
visit our WEB SITE to view an install video
www.video.uk.electrolux.com
132 981 560
INSTRUCTION BOOKLET
GB
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move
house and leave the appliance, always ensure that the book is supplied with the appliance in
order that the new owner can get to know the functioning of the appliance and the relevant
warnings. These warnings have been provided in the interest of safety. You MUST read them
carefully before installing or using the appliance.
Installation
●
●
●
●
●
●
●
●
●
This appliance is heavy. Care should be taken when
moving it.
It is dangerous to alter the specifications or attempt
to modify this product in any way.
All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in instructions.
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
Care must be taken to ensure that the appliance does
not stand on the electrical supply cable.
If the machine is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely.
Always be sure, that there is no water leakage from
hoses and their connections after the installation.
●
●
●
●
●
Child Safety
●
●
●
●
●
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.
Pets and children have been known to climb into
washer-dryers. Please check your drum before use.
The glass door becomes very hot during the washing
and drying cycle. Keep children away from the
vicinity of the appliance whilst it is in operation.
Keep all packaging well away from children.
Keep all detergents in a safe place out of children’s
reach.
●
●
●
Use
●
●
●
Always unplug the appliance and turn off the water
supply after use.
Do not overload the appliance. See relevant section
in the instruction book.
Only wash and dry fabrics which are designed to be
machine washed and dried. If in doubt, consult the
care label on the clothes.
●
●
2
Before washing, ensure that all pockets are empty
and buttons and zips are fastened. Avoid washing
frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras
must NOT be machine washed.
Any objects such as coins, safety pins, nails, screws,
stones or any other hard, sharp material can cause
extensive damage and must not be placed into the
machine.
Garments which have been in contact with volatile
petroleum products should not be machine washed.
If volatile cleaning fluids are used, care should be
taken to ensure that the fluid is removed from the
garment before placing in the machine.
Wash small items such as socks, laces, washable
belts etc in a washing bag or pillow case as it is
possible for such items to slip down between the tub
and the inner drum.
Only use the advised quantities of fabric softener.
Damage to the fabric can ensue if you over-fill.
Refer to the manufacturer’s recommendations of
quantities.
As some duvets and eiderdowns should be
washed/dried in large commercial machines because
of their bulk, please check with the manufacturer of
the item before washing in a domestic machine.
The users should always check that they have not
left their gas lighters (disposable or otherwise) in
their clothing.
Never tumble dry items that have had contact with
chemicals such as dry cleaning fluid.These are of a
volatile nature and could cause an explosion.
Only tumble dry items which have been washed in
water or require airing.
Plastic detergent dispensers should not remain in the
drum during the drying cycle, as the plastic used is
not designed to withstand the heat. If you wish to
wash-through-to-dry you should use the
conventional detergent dispenser drawer.
Leave the porthole door slightly ajar between washes
to preserve the door seal.
Under no circumstances should you attempt to repair
the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Furthermore, it will invalidate your
guarantee. Contact your local Service Force Centre.
Always insist on genuine spare parts.
Contents
For the User
Important Safety Information
Your New Washer-Dryer
Description of the Appliance
Detergent dispenser drawer
Child safety feature
The Control Panel
Operating sequence
Wash Care Symbols
Washing Programmes
Drying Programmes
Maintenance and Cleaning
2
4
5
5
5
Descaling
After each wash
Maintenance wash
External cleaning
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the pump
Cleaning the water inlet filter
The dangers of freezing
Emergency emptying out
6-10
11-14
Washing
11
Load the laundry
11
Measure out the detergent
11
Measure out the fabric softener
11
Switch the machine on
11
Select the required programme/fabric
11
Select the temperature
12
Select the spin speed or the “Rinse Hold” option
12
Select the desired options
12
Select the “Delay”
12
Start the programme
12
How to change an option or a programme
during its cycle
13
How to cancel a programme during its cycle
13
How to open the door during the cycle of
a programme
13
End of programme
13
Drying 3 kg of cotton
14
Autodrying 2 kg of synthetics
14
Washing and Drying Hints
Which detergent to use?....
And in which form?
Something Not Working
Service and Spare Parts
Guarantee Conditions
17
18
19
20-21
20
20
20
20
20
20
20-21
21
21
21
22-23
23
24
For the Installer
Installation Instructions
Technical Specifications
Unpacking
Positioning
Water inlet
Water drainage
Levelling
Special conditions
In the interest of the environment
Electrical connection
15
16
16
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
25
25
26
26
27
27-28
28
28
28
29
Your New Washer-Dryer
This new machine, which is fitted with the New Jet System, meets all modern requirements for
effective treatment of laundry with low water, energy and detergent consumption.
●
●
●
●
The special wool programme with its new delicate
wash system treats your woollens with extreme care.
The balance control device ensures that the
machine remains stable when spinning.
Automatic cooling of the wash water to 60°C
before draining, with the 95°C programme. This
reduces thermal shock to fabrics, helping to prevent
creasing.
The two drying programmes will give your wash
that soft, relaxed feel whatever the weather.
In the interest
of the environment
●
●
●
Ecological hints
●
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
● Adjust the quantity of detergent according to the
hardness of your water supply, the amount of
laundry and the degree of soiling.
● Select the “Extra Quick” or the “40° AA” option for
lightly soiled laundry.
● A programme without prewash is sufficient for
normally soiled laundry.
● Try to load the maximum drying capacity of the
machine as small loads are uneconomical.
● Always load well spun laundry. The higher the spin
speed, the lower the electricity consumption and the
shorter the drying times.
Materials marked with the symbol
are
recyclable.
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. For more detailed information about
recycling of this product, please contact your local
city office, your household waste disposal service or
the shop where you purchased the product.
How do we help to protect the environment?
We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, it is because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed "Something
Not Working".
4
Description of the Appliance
1 Detergent dispenser drawer
2 Control Panel
3 Door opening handle
4 Drain pump
5 Adjustable feet
2
1
On/Off
JETSYSTEM
Cotton Daily
Cottons
Synthetics
Delicate
Wool/
Handwash
1 2 0 0 6 kg
Fabrics
95°C
60°C
50°C
40°C
30°C
Temperature
1200
900
700
500
Rinse Hold
Spin Speed
Prewash
40° AA
Extra Quick
Options
Delay
Cottons
Extra Dry
Store Dry
Iron Dry
Synthetics
Store Dry
Cottons
Synthetics
Start/Pause
Auto Dry Drying Time
Skip
ZWD 1272 W
Prewash
Wash
Rinse
Spin
Drain
Drying
Reset
3
4
5
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
C0063
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.
P1131
5
The Control Panel
ZWD 1272 W
Cotton Daily
Cottons
Synthetics
Delicate
On/Off
1
Wool
/
Handwash
2
95°C
60°C
50°C
40°C
30°C
1200
900
700
500
Prewash
40° AA
Iron Dry
Extra Quick
Rinse Hold
Fabrics
Temperature
Spin Speed
Options
3
4
5
6
Delay
Cottons
Extra Dry
Store Dry
Cottons
Synthetics
Store Dry
Synthetics
Start/Pause
Auto Dry Drying Time
7
8
9 10
Skip
ZWD 1272 W
Prewash
Wash
Rinse
Spin
Drain
Drying
Reset
11 12 13
1 On/Off button
4 “Temperature” button
Press this button to switch the machine on. The display
(9) will show three blinking dashes or a blinking zero.
You will find more detailed explanations on page 7 and
8 (see “Display”).
Press the “On/Off” button again to switch the machine
off.
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
machine. The relevant light will light up.
Maximum temperatures are 95°C for Cottons and
“Cotton daily” programme, 60°C for Synthetics, 40°C
for delicate fabrics, Wool and fabrics to be handwashed (Wool
/ Handwash programme).
2 MAINS-ON light
This light is connected to the “On/Off” button. It lights
up when you press the button, and goes out when you
press it again.
5 “Spin Speed” button
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the machine. The relevant
light will light up.
Maximum speeds are:
• for cotton: 1,400 rpm (ZWD 1472 W - 1472 S)
1,200 rpm (ZWD 1272 W);
• for synthetic fabrics, wool and fabrics to be handwashed: 900 rpm;
• for delicate fabrics: 700 rpm.
“Rinse Hold” position: when you choose this option,
the machine will not drain the water of the last rinse, so
as not to crease the laundry.
3 “Fabrics” button
Press this button repeatedly to select the programme on
the basis of the type of laundry to be washed. The light
relevant to the selected programme will light up. The
machine will propose a temperature and automatically
select the maximum spin value provided for the
programme you have chosen. You can change these
values by operating buttons 4 and 5.
Cotton daily
To be used for lightly soiled cotton items in order to
obtain a good washing performance in a short time.
At the end of the cycle, the “Start/Pause” button light
goes off, the “Rinse Hold” button light remains lit to
indicate that the water must be drained and a flashing
zero will appear on the display.
To complete the cycle press the “Skip/Reset” button
once, so as to cause all the lights to go off; the display
will show three blinking dashes.
Wool
/ Handwash
When you select this programme, you obtain a
particularly delicate wash, suitable for articles of
clothing whose label indicates that they must be handwashed
.
6
7 “Auto Dry” button
Then select the previously selected washing programme
by means of the “Fabrics” button. If you wish to drain
and spin press the “Skip/Reset” button in order to select
the “Spin” or “Drain” position.
You can select the spin speed by means of the relevant
button and then press press the “Start/Pause” button.
This button allows you to choose the required degree of
drying for cottons and synthetics:
- Extra dry (only for Cottons)
- Store dry (Cottons and Synthetics)
- Iron dry (only for Cottons)
The corresponding pilot light illuminates.
The drying time is automatically adjusted by the
machine: the laundry will be dried to the selected degree
of dryness.
Important!
If you accidentally press the “Skip/Reset” button more
than once, the display will show three blinking dashes.
To cause the washing machine to drain the water, select
any washing programme by means of the “Fabric”
button, then press “Skip/Reset” three times in order to
select the “Drain” position (only the “Drain” light will
remain lit) then press again the “Start/Pause” button.
The Rinse Hold option cannot be selected for the
automatic WASHING & DRYING programme.
8 “Drying Time” button
By depressing this button you can select a timed
programme for cotton or synthetics, the relevant light
illuminates. To select “Cottons” you have to push the
button for about 2 seconds. To select the drying time
push the button until the time you want appears in the
display according to the fabrics (Cottons or Synthetics)
you have to dry.
For Cottons and Synthetics you can select a drying
time from 10 minutes to 130 minutes (2.10).
Every time you press the button the time increases by
5 mins.
6 “Options” button
Press this button to select the following options:
• Prewash: select this option if you wish your laundry
to be prewashed at 30° C before the main wash (not
available for Wool
/ Handwash programme).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
9 Display
The following pieces of information are shown on the
display:
• Three blinking dashes, when a programme is
cancelled by means of the “Skip/Reset” button.
The three blinking dashes will also appear when you
press the “On/Off” button to switch the machine on, if
the previously selected cycle has been erased.
• 40° AA: this option can be selected for cottons and
synthetics lightly or normally soiled with a
temperature of 40°C or higher.
The washing temperature will be reduced and the
washing time will be prolonged in order to achieve an
AA class in energy efficiency and washing
performance (not available for Cottons Daily
programme).
• “Extra Quick”: select this option for laundry that is
only slightly soiled (not available for Cottons Daily
and Wool
/ Handwash programmes).
The washing time will be reduced according to the
type of fabric and the selected temperature.
The “Prewash”, the “40° AA” and “Extra Quick”
options cannot be selected together by means of the
“Options” button.
---
7
• Duration of washing programme in hours and
minutes, after you have selected a programme.
Important!
The first time you use the machine, when you switch
it on, it may display a blinking zero. This is due to the
fact that the machine has performed a washing cycle
during the manufacturer’s inspection tests, and this cycle
has not been erased after its completion.
2.05
• Delay start, a time value indicated in hours and selected
by means of the relevant button (max 23 hours).
While the programme is running (after you have
pressed the “Start/Pause” button), the displayed time
value decreases by one unit every minute.
• Selected drying time in minutes or hours and
minutes (max 130 mins).
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the “Start/Pause” button, the
delay time value displayed will decrease by units of
one hour every hour. When only two hours remain,
the display will decrease in 30 minute steps down to
zero.
You can delay the start of the selected programme by
up to 23 hours in one hour intervals.
• An incorrect option selection has been made: this is
indicated by the message Err when a function
incompatible with the current programme is selected.
1.25
After the programme has started the time remaining is
updated every minute.
• The washing machine has stopped with water in
the tub, at the end of a programme with the “Rinse
Hold” option: this is indicated by a blinking zero.
• The washing machine has completed the
programme: this is indicated by a blinking zero.
The zero will reappear when you switch the washing
machine on, unless the previous programme has been
erased by means of the Skip/Reset button.
• An alarm code indicates a fault in the machine
operation (see the relevant chapter on page 22-23).
0
E20
8
10 “Start/Pause” button
Prewash
This button has two functions:
• Start: after you have selected the desired programme
and options, press this button to start the machine. The
light above the button will stop flashing and remain lit.
If you have selected a delay time by means of the
“Delay” button, the countdown will begin and will be
shown on the display.
Wash
Rinse
Spin
Drain
Drying
To select rinse & spin, press the “Skip” button once,
the wash LED goes out.
• Pause: when you press this button again, the
programme in progress is interrupted. The light above
the button will start flashing. To restart the
programme, press the button again.
Prewash
Wash
Important! You must set the washing machine to
PAUSE before you make any change in the programme
in progress.
Rinse
Spin
Drain
Drying
11 “Skip/Reset” button
This button performs two functions:
- Clears the memory
- Selects special programmes
At the end of every programme the “Reset” button must
be pressed once or repeatedly to clear the programme
memory. This will be confirmed by three dashes,
flashing in the display.
If the previous programme is not cleared, the display
will show a flashing “0”, when you switch the machine
on.
Selecting a special programme:
A wash programme must be selected in the normal way.
(“Start/Pause” button not pressed)
To select spin only, press the “Skip” button twice.
The wash & rinse LED,s go out.
Prewash
Wash
Rinse
Spin
Drain
Drying
To select Drain press the “Skip” button three times, the
wash - rinse - spin LED,s go out.
Prewash
Wash
Rinse
Start/Pause
Spin
Drain
Drying
A normal wash cycle consists of the following phases,
Wash - Rinse - Spin and is confirmed by the
illumination of the corresponding LED,s.
If you wish to cancel or advance the running
programme to the required phase, PAUSE the cycle and
then press the “Skip” button as previously described.
9
12 “Delay” button
13 Programme phase indicator
lights
This button makes it possible to delay the starting of the
programme selected from 30 min - 60 min - 90 min, 2
hours and then by 1 hour up to a maximum of 23 hours.
The delay you have selected is shown on the display for
about 3 seconds; afterwards, the duration of the
programme reappears.
You must select this option after you have set the
programme and before you press the “Start/Pause”
button.
The time value shown on the display will decrease by
one unit every hour.
You can change the delay time at any moment,
before you press the “Start/Pause” button.
If you have already pressed the “Start/Pause” button,
and you wish to cancel the delay time, proceed as
follows:
When you select a programme, the lights relevant to the
phases that form the programme light up.
Prewash
Wash
Rinse
Spin
Drain
Drying
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
• set the machine to PAUSE by pressing the
“Start/Pause” button;
• press the “Delay” button until the display shows the
symbole «0’».
• press the “Start/Pause” button again.
Important!
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
machine to PAUSE by pressing the “Start/Pause”
button. After you have closed the door, press the
“Start/Pause” button again.
10
Operating Sequence
WASHING
4. Switch the machine on
Before the first wash we recommend that you run a
cotton cycle at 95°C, with the machine empty, in order
to remove any manufacturing residue from the drum
and tub.
Pour half a measure of detergent into the main wash
compartment
and start up the machine.
Press the “On/Off” button to switch the machine on.
The display will show three blinking dashes or a
blinking zero. The light above the button will light up.
O n / Off
1.Load the laundry
--0
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
5. Select the desired programme/
fabric
Press the “Fabrics” button repeatedly, in order to select
the desired programme/fabric. The relevant light will
light up.
The lights relevant to the phases that form the
programme will light up.
The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The “Start/Pause” button
light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
duration relevant to the maximum load. The duration
value will be gradually adjusted during the execution of
the cycle.
P0004
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
main wash compartment
.
If you wish to carry out the prewash, pour detergent into
the appropriate compartment marked
.
3.Measure out the fabric
softener
Cotton daily
Cottons
Synthetics
Delicate
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
Wool/
Handwash
Prewash
Wash
Rinse
Spin
Drain
Fabrics
C0064
C0065
Close the drawer gently.
11
Drying
6. Select the temperature
Press the “Options” button so as to cause one of the
lights to light up.
Press the “Temperature” button if you wish to select a
temperature value different from the one proposed by
the machine.
The relevant light will light up.
Prewash
40° AA
Extra Quick
95°C
60°C
50°C
40°C
30°C
Options
9. Select the “Delay”
Temperature
Before you start the programme, if you wish the start
to be delayed, press the “Delay” button repeatedly, or
keep it pressed, to select the desired delay. The selected
delay time value (up to 23 hours) will appear on the
display for 3 seconds, then the duration of the
programme will appear again.
7. Select the spin speed or the
Rinse Hold option
Press the “Spin Speed” button repeatedly, in order to
select the desired spin speed or the “Rinse Hold”
option. The relevant light will light up.
If you select the “Rinse Hold” option, the machine will
stop at the end of the programme with the water still in
the tub.
ZWD 1272 W
ZWD 1472 W - S
1200
900
700
500
Rinse Hold
Spin Speed
Delay
1400
900
700
500
Rinse Hold
10. Start the programme
Press the “Start/Pause” button. The relevant light will
stop flashing and only the light relevant to the phase that
is in progress will remain lit.
If you have chosen a delayed start, the washing machine
will begin the countdown.
The display will show the duration of the programme or
the selected delay.
Spin Speed
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the “Prewash” option.
If your laundry is lightly or normally soiled and it is
necessary to prolong the washing time, select the
“40° AA” option.
If your laundry is only slightly soiled, select the
“Extra Quick” option.
The relevant light illuminates.
Start/Pause
12
11. How to change an option or
a programme during its cycle
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperature of the
water in the machine!
When you close the door and press the “On/Off” button
again, the machine will resume the programme from the
point where it had been interrupted.
Before you make any change, you must pause the
machine by pressing the “Start/Pause” button.
It is possible to change the temperature or any option
before the programme carries it out.
Changing a running programme is possible only by
cancelling it and selecting a new programme.
The machine will resume the cycle from the beginning
and the washing water in the tub will not emptied out.
If it is necessary to drain the water, proceed as follows:
• PAUSE the machine by pressing the “Start/Pause”
button;
• press the “Skip/Reset” button repeatedly, until only
the “Drain” light remains lit;
• press the “Start/Pause” button again.
14. End of programme
At the end of the programme, the machine stops
automatically, the “Start/Pause” button light goes off
and the display shows a blinking zero.
If you had selected the “Rinse Hold” option, the
“Start/Pause” button light goes off, the “Rinse Hold”
button light remains lit and the door is locked to indicate
that the water must be drained. The display shows a
blinking zero.
When the programme has been completed, a blinking
zero appears on the display.
Press the “Skip/Reset” button repeatedly to erase the
programme that has just been carried out. If you
omit to do this, the next time you switch the machine
on, the blinking zero will appear on the display.
When the water has been drained, the display shows a
blinking zero. You may now select a new programme
and press the “Start/Pause” button to start it.
12. How to cancel a programme
during its cycle
Note: when you switch the machine on, if you must
erase the previously performed programme, it is also
sufficient to press the “Fabrics” button and select a new
programme.
Press the “On/Off” button to switch the machine off.
The relevant light will go out.
Remove the laundry from the machine.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get damaged
in a subsequent wash (e.g. by shrinking) or bleed colour
into another load of laundry.
We advise you to close the water supply tap and
disconnect the plug from the socket.
Leave the door ajar in order to air the machine.
To cancel a programme that is being carried out, first
pause the machine by pressing the “Start/Pause” button,
then press the “Skip/Reset” button repeatedly, until the
display shows three blinking dashes.
13. How to open the door during
the cycle of a programme
You can open the door, after having set the machine to
PAUSE, provided the following conditions exist:
• the washing machine is not in the heating phase
beyond 55°C;
• the level of the water is not high;
If these requirements are met, when you pause the
machine the door can be opened.
Should it not be possible to open the door, and should it
be absolutely necessary to do so, switch the machine off
by pressing the “On/Off” button.
13
4. Press the “Start/Pause” button to start the
programme.
DRYING 3 KG OF COTTON
You have for example just machine-washed and spun at
1200 rpm 6 kg of laundry.
They are cotton fabrics of medium weight which you
want to iron as soon as they are dry.
Press the “Skip/Reset” button repeatedly to erase the
programme that has just been carried out, the display
will show three blinking dashes and switch the machine
off by depressing “On/Off” button.
Then remove the laundry from the appliance and divide
the items to obtain two loads of approx. 3 kg each.
The water tap must be open and the drain hose must be
positioned in the sink or connected to the drain pipe.
1. Load the laundry.
2. Depress the “On/Off” button to switch the machine
on, the display will show three blinking dashes.
Start/Pause
5. At the end of the programme press “Skip/Reset”
button to clear the memory and switch the machine
off by depressing “On/Off” button.
6. Remove the laundry.
Note:
The programme time will automatically increase by up
to 1 minute, this is quite normal.
3. If you wish to carry out the electronic drying,
depress “Auto Dry” button until the light “Iron
Dry” illuminates.
AUTODRYING 2 KG OF SYNTHETICS
You intend to wash and dry automatically 2 kg of
synthetics which do not need ironing.
Cottons
Extra Dry
Store Dry
Iron Dry
Synthetics
Store Dry
Do not use a dosing device/ball when carrying out a
washing & drying programme.
Auto Dry
1. Load the laundry.
2. Add detergent and fabric softener.
3. Switch the machine on by depressing the “On/Off”
button .
4. Select the wash programme/fabric and temperature.
5. Select the drying time or degree of drying.
6. Select the required options by means of the relevant
buttons. If possible, do not select a spin speed lower
than that proposed by the appliance to avoid a too
long drying time so saving energy.
In any case the reduction of the spin speed is only
possible after selecting drying. The lowest values
you can select are the following:
- 900 r.p.m. for cottons & synthetics with electronic
drying
- 900 r.p.m. for cottons and 700 r.p.m. for synthetics
with timed drying
7. Start the programme by depressing the
“Start/Pause” button.
8. At the end of the programme press the “Skip/Reset”
button to clear the memory and press the “On/Off”
button again to switch the machine off.
9. Remove the laundry.
If you want a timed drying, depress the “Drying Time”
button until the light “Cottons” lights up, then depress
the same button until the time you want appears on the
display.
Attention!
If you select a drying time longer then 55’ minutes,
after 3 secondes, the display will show it in hours
and minutes (see the exemple below).
Exemple:
60
1.00
Cottons
Cottons
Synthetics
Synthetics
Drying Time
Drying Time
14
Washing and Drying Hints
●
Do NOT overload the machine. Weigh the laundry the
first few times you use the appliance.
The average weights of the most common items are
listed below as a guide:
1000g = 1 kg
Sheet
Pillow case
100-200 g
Tablecloth
400-500 g
Serviette
50-100 g
Tea towel
70-120 g
Linen hand towel
100-150 g
Towelling hand towel
150-250 g
Towelling bath towel
700-1000 g
Bath robe
●
700-1000 g
●
●
●
1000-1500 g
Man’s shirt
200-300 g
Apron
150-200 g
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Load the laundry loosely alternating large items with
small ones.
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
Avoid washing unhemmed or torn items as they may
unravel.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
When washing curtains, remove the hooks.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
White items should not be washed with coloured
items.
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
Use a good quality detergent suitable for automatic
washing machines.
Use the correct quantities of detergent.
For wool, use gentle detergent only in small
quantities.
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
●
●
●
●
Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special presoak product or biological detergent.
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
Do not leave the damp laundry load in a heap too
long before drying.
Avoid drying dark clothes with light coloured fluffy
items such as towels as these can attract the fluff.
If you overdry the laundry, besides wasting energy,
any subsequent ironing may become more difficult
because the fabric could be heavily crumpled.
Remove the laundry when the appliance has finished
drying.
To avoid a static charge when drying is completed,
use either a fabric softener when you are washing the
laundry or a fabric conditioner specifically for
tumble dryers.
Particularly delicate items such as synthetic curtains,
woollen and silk, garments with metal inserts, nylon
stockings, bulky garments such as anoraks,
bedcovers, quilts, sleeping bags and duvets must not
be machine dried.
Garments padded with foam-rubber or materials
similar to foam-rubber must not be machine dried;
they represent a fire hazard.
Also, fabrics containing residues of setting lotions or
hair sprays, nail solvents or similar solutions must
not be machine dried in order to avoid the formation
of harmful vapours.
For drying, follow the indications given on the
manufacturer’s labels.
May be tumble dried
Drying at high temperature
Drying at reduced temperature
Do not tumble dry
Important:
As a dryer, the machine works on the condensation
principle.
Therefore, the water tap must be open and the
drain hose must drain water into a sink or into
the drain pipe, even during the drying cycle.
15
Which detergent?....
And in which form?
To ensure you obtain the best wash results from your
appliance, it is important to use the right detergent in
your everyday wash, and only detergents recommended
for use in automatic machines.
To maintain the appearance of your clothes and
household textiles and to make them last longer you
should use different types of detergent for different
washes, whether for whites, colours or delicates.
Not only are there different types of detergent, but they
are also available in different forms. Whether you chose
a powder or liquid in traditional or compact form is
your own personal choice.
TRADITIONAL POWDERS
Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.
TRADITIONAL LIQUIDS
WHITES
Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol
, start
the machine immediately upon placing the
detergent in the dispenser drawer.
Alternatively the detergent is measured into the
specially designed dosing device* which should be
placed on top of the laundry, and at the back of the
machine drum.
We recommend the Ariel product
range which is biological and
designed to provide excellent
cleaning and stain removal even
at low temperatures.
NON BIOLOGICAL
If you prefer to use a non
biological detergent, which does
not contain enzymes we
recommend Fairy. Fairy provides
good cleaning and stain removal.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also
known) are available in liquid or powder form, and
generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most
economical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the detergent
into the specially designed dosing device* which
should be placed on top of the laundry, and at the back
of the machine drum.
COLOURS
For coloured items you should use a
detergent which is designed to clean
while maintaining the original colour.
Ariel Color does not contain bleach
and therefore helps to preserve
colours.
* If you use a dosing device in a washer dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
DELICATE ITEMS
FABRIC CONDITIONERS
When washing delicates such as
woollens, you should use a product
which is specially designed to care for
fine fabrics.
Dreft Automatic is suitable for
woollens and other delicates.
These are ideal for improving ‘softness’, and also
reduce static cling on synthetics and make ironing
easier. They are available in two types:
For example Lenor liquid fabric
softener, for use in the washing
machine/washer dryer. The
liquid fabric softener should be
poured into the compartment
marked with the symbol .
Follow the manufacturer’s dosage
instructions and never exceed the
MAX level.
LAUNDRY BLEACH
For additional stain removal you may
wish to use a product such as Ace
Gentle Bleach which is used in addition
to your chosen detergent. Ace is
suitable for all washable fabrics
including silks, woollens and colours.
Bounce conditioning sheets for use
in a tumble dryer. We recommend
the conditioning sheets are pinned
(using a safety pin) to an article
of laundry and placed in the
tumble dryer.
16
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
95
Normal (Maximum)
White Cotton or Linen
without Special Finishes
60
Normal (Maximum)
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
50
Reduced (Medium)
Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Cotton/Acrylic Mix.
40
Normal (Maximum)
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
Reduced (Medium)
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
40
Much Reduced (Minimum)
Hand wash only
FABRIC
Wool, wool mixtures, Silks
Do not machine wash
BLEACHING
Chlorine bleach may be used
IRONING
Hot iron
Cotton, Linen, Viscose
Warm iron
Polyester mixtures, Wool
Cool iron
Acrylic, Nylon, Polyester
DRY CLEANING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
TUMBLE DRYING
with high heat setting
with low heat setting
May be tumble dried
X
A cross through any symbol means «DO NOT»
Important Notes
fabric conditioner to avoid the conditioner entering the
machine prematurely.
When using liquid detergent and a prewash programme,
place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
Once the dispenser has been filled, close it by pushing it
in gently. This is particularly important if you are using
17
Washing programmes
Cotton programmes
Type of laundry
and symbols on
labels
60
95
White cotton:
e.g. sheets,
tablecloths,
household linen
60
Load
6 kg
6 kg
95
White cotton:
e.g. sheets,
tablecloths,
household linen
Programme/
temperature
Cottons
60°-95°C
40
6 kg
30
Coloured
cotton: e.g. shirts,
blouses, towels,
underwear,
60
50
40
30
2.5 kg
Synthetic fabrics
and blends: e.g.
shirts, blouses,
underwear
40
30
40
30
Delicate 2.5 kg
fabrics: e.g.
acrylic fabrics,
viscose, polyester,
synthetic blends
Wool /
Handwash
2 kg
Consumption*
Available options
Energy kWh
Water
litres
SPIN SPEED
RINSE HOLD
PREWASH
2.0
52
Main wash at
60° - 95°C
3 rinses
Long spin
SPIN SPEED
RINSE HOLD
PREWASH
40° AA
EXTRA QUICK
2.05
52
Main wash at
60°- 50° - 40°30°C
3 rinses
Long spin
SPIN SPEED
RINSE HOLD
PREWASH
40° AA **
EXTRA QUICK
1.02
49
SPIN SPEED
RINSE HOLD
PREWASH
1.15
49
SPIN SPEED
RINSE HOLD
PREWASH
40° AA**
EXTRA QUICK
0.85
50
Cotton daily Main wash at
60° - 95°C 60°- 95°C
3 rinses
Long spin
30
60
40
Cottons
6 kg
Coloured cotton
+ 60°- 50°- 40° 30°C
40AA
*** : e.g. shirts,
blouses,
underwear, towels,
house-hold linen
60
Description of
programme
Cotton daily Main wash at
60°- 50°- 40° - 60°-50° - 40°30°C
30°C
3 rinses
Long spin
Synthetics Main wash at
60°-50°- 40°- 60° - 50° - 40° 30°C
30°C
3 rinses
Short spin
Delicates
40° - 30°C
Main wash at
40° - 30°C
3 rinses
Short spin
SPIN SPEED
RINSE HOLD
PREWASH
EXTRA QUICK
0.55
53
Wool/
Handwash
40° - 30°C
Main wash at
40°- 30°C
3 rinses
Short spin
SPIN SPEED
RINSE HOLD
0.35
52
*
This data is given purely as an indication: the consumption values may vary in relation to the quantity and type
of laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest
temperature provided for each programme.
** Only at the temperature of 40°C or higher.
*** The “Coloured cotton programme” at 60°C with the option 40° AA selected is the reference programme for
the data entered in the energy label, in compliance with EEC 92/75”.
Note! For the duration of the programmes, please refer to the display on the control panel.
18
Drying Programmes
Timed drying
Degree of drying
Extra dry
Ideal for
towelling
materials
Type of fabric
Max. load
Spin speed
Drying time mins
1200
100
1400
95
1200
60
1400
55
1200
90
1400
85
1200
50
1400
45
2,0 kg
900
75
1,0 kg
900
40
1200
75
1400
70
1200
45
1400
40
3 kg
Cotton and linen
(bathrobes, bath
towels, etc.)
1.5 kg
3 kg
Store dry (*)
Suitable for items
to put away
without ironing
Cotton and linen
(towels, T-shirts,
bathrobes)
1.5 kg
Synthetics and mixed
fabrics (jumpers,
blouses, underwear,
household linen)
3 kg
Iron dry
Suitable for
ironing
Cotton and linen
(sheets, tablecloths,
shirts, etc.)
1.5 kg
(*) The Store dry drying programme for cotton is the reference programme for the Energy Label data, in compliance
with EC directive 92/75.
19
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you
must DISCONNECT the appliance from the electricity
supply.
To aid cleaning, the top part of the additive compartment
should be removed.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
C0068
P1086
Cleaning the drawer recess
After each wash
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.
Maintenance Wash
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
To run a maintenance wash:
● The drum should be empty of laundry.
● Select the hottest cotton wash programme.
● Use a normal measure of detergent, must be a
powder (such as Ariel Futur).
P0038
Cleaning the pump
The pump should be inspected if
• the machine does not empty and/or spin
• the machine makes an unusual noise during draining
due to objects such as safety pins, coins etc. blocking
the pump.
External cleaning
Clean the exterior cabinet of the appliance with a
solution of mild washing up liquid and water and then
dry thoroughly.
Proceed as follows:
• Disconnect the appliance.
• If necessary wait until the water has cooled down.
• Open the pump door.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to remove
any traces of accumulated powder.
P1114
• Place a container close to the pump to collect any
spillage.
C0066
C0067
20
Cleaning the water inlet filter
• Pull out the emergency emptying hose, place it in the
container and remove its cap.
• When no more water comes out, unscrew the pump
cover and remove it. Always keep a rag nearby to dry
up spillage of water when removing the cover.
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
Turn off the water tap. Unscrew the water inlet hose.
Clean the filter using a hard bristle brush.
Tighten up the inlet hose.
P1115
• Remove any objects from the pump impeller by
rotating it.
P1090
The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
● Turn off the water tap.
● Unscrew the inlet hose.
● Place the end of the emergency emptying hose and
that of the inlet hose in a bowl placed on the floor
and let water drain out.
● Screw the water inlet hose back on and reposition
the emergency emptying hose after having put the
cap on again.
● When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
• Put the cap back on the emergency emptying hose and
place the latter back in its seat.
Emergency emptying out
P1117
If the water is not discharged, proceed as follows to
empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the pump door;
• place a bowl on the floor and place the end of the
emergency emptying hose into the bowl. Remove its
cap. The water should drain by gravity into the bowl.
When the bowl is full, put the cap back on the hose.
Empty the bowl. Repeat the procedure until water
stops flowing out;
• clean the pump if necessary as previously described;
• replace the emergency emptying hose in its seat after
having plugged it;
• screw the pump cover again and close the door.
• Screw the pump cover fully in.
• Close the pump door.
Warning
When the appliance is in use and depending on the
programme selected there can be hot water in the pump.
Never remove the pump cover during a wash cycle,
always wait until the appliance has finished the cycle,
and is empty. When replacing the cover, ensure it is
securely retightened so as to stop leaks and young
children being able to remove it.
21
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling
out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
During machine operation it is possible that one of the following alarm codes appears on the display and in the same
time the buzzer sounds:
- E10 : problem with the water supply
- E20 : problem with water draining
- E40 : door open
Once the problem has been eliminated, press the “Start/Pause” button
to restart the programme. If after all
checks, the problem persists, contact your local Service Force Centre.
Symptom
Possible causes
The machine does not start
●
●
●
●
●
●
The machine does not fill
●
●
●
●
The machine fills then empties
immediately
●
●
●
The machine does not empty and/or
does not spin
●
●
●
●
●
●
There is water on the floor
●
●
●
●
●
●
Unsatisfactory washing results
●
●
●
●
The door has not been closed. (E40)
The plug is not properly inserted in the power socket.
There is no supply at the socket.
The main fuse or the fuse in the plug has blown.
The “Start/Pause” button has not been depressed.
The “Delay” option has been selected.
The water tap is closed. (E10)
The filter in the inlet hose is blocked. (E10)
The inlet hose may be squashed or kinked. (E10)
The door has not been closed. (E40)
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
The drain hose may be squashed or kinked. (E20)
The “Rinse Hold” option has been selected.
The drain pump may be blocked. (E20)
The drain hose extension, if fitted, is not correct. Follow the
instructions for connecting to the waste.
The drainage system pipes are blocked.
The wash load is unbalanced: redistribute the clothes inside the drum to
allow the machine to spin.
Too much detergent or unsuitable detergent has been used (creates too
much foam).
Check whether there are any leaks from the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if
it is damp.
The drain hose may be damaged or not securely positioned.
The detergent dispenser drawer or recess is clogged.
The drainage system pipes are blocked.
The cap on the emergency emptying hose has not been replaced after
cleaning the pump.
Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
Stubborn stains have not been treated prior to washing
The correct wash programme/temperature has not been selected.
Too much laundry has been placed in the drum.
22
Symptom
Possible causes
The machine vibrates when spinning
●
●
●
●
●
The door will not open
●
●
●
The internal packing has not been removed.
The machine is in contact with the wall or furniture.
The machine is not level and stable (check diagonally).
The washing load is badly distributed in the drum.
Maybe there is very little laundry in the drum.
The water level is above the bottom edge of the door.
The machine is heating the water or drying the clothes.
The drum is turning.
Spinning starts late or the machine
does not spin
●
The machine makes an unusual
noise
●
No water is visible in the drum
●
Machines based on modern technology operate very economically
using very little water without affecting performance.
The machine does not dry or does
not dry properly
●
The drying time or degree of drying has not been selected
The water tap is not turned on (E10)
The drain pump is clogged (E20)
The machine is overloaded
The selected drying time or degree of dryness was not suitable for the
laundry
●
●
●
●
The electronic balance control device has cut in because the laundry is
not evenly distributed in the drum. The laundry is redistributed by
reverse rotation of the drum. This may happen several times before the
unbalance disappears and normal spinning can resume. If, after a few
minutes, the laundry is still not evenly distributed in the drum, the
machine will spin at a lower spin or will not spin. In this case,
redistribute the load manually and select the spin programme.
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture)
5. The purchase date.
Please note that a valid purchase receipt or
guarantee documentation is required for inguarantee service calls.
Service & Spare Parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Service Force Centre by telephoning:
0870 5 929929
Mo
Pro d. .....
d.
No .....
. .....
.....
.
Ser
. No
. .....
....
Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.
For the address of your local Service Force Centre and
further information about Service Force, please visit the
website at www.serviceforce.co.uk.
To buy accessories, consumables and spare parts at
our online shop please visit: http://www.zanussielectrolux.co.uk
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
Mod. ..........
Prod. No. ...........
P0042 BD
Ser. No. .........
Customer Care Department
For general enquiries concerning your Zanussi
Electrolux appliance or for further information on
Zanussi Electrolux products, please contact our
Customer Care Department by letter or telephone at the
address below or visit our website at www.zanussi.co.uk
23
Customer Care Department - Zanussi Electrolux
Major Appliances
Addington Way - Luton - Bedfordshire
LU4 9QQ
Tel 08705 727727*
For Customer Service in Ireland please contact us at the
address below:
Zanussi Electrolux - Electrolux Group (Irl) Ltd
Long Mile Road - Dublin 12 - Republic of Ireland
Tel: +353 (0)1 4090751
Email: service.eid@electrolux.ie
* calls to this number may be recorded for training
purposes.
Guarantee Conditions
Standard guarantee conditions
●
We, Zanussi Electrolux, undertake that if, within 12
months of the date of the purchase, this ZANUSSI
ELECTROLUX appliance or any part thereof is proved
to be defective by reason only of faulty workmanship or
materials, we will, at our option repair or replace the
same FREE OF ANY CHARGE for labour, materials or
carriage on condition that:
● The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.
● The appliance has been used for normal domestic
purposes only, and in accordance with the
manufacturer’s instructions.
● The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any
person not authorised by us.
● All service work under this guarantee must be
undertaken by a Service Force Centre.
● Any appliance or defective part replaced shall
become the Company’s property.
● This guarantee is in addition to your statutory and
other legal rights.
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
●
European guarantee
If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:
● The guarantee starts from the date you first
purchased your product.
● The guarantee is for the same period and to the same
extent for labour and parts as exists in the new
country of use for this brand or range of products.
● The guarantee relates to you and cannot be
transferred to another user.
● Your new home is within the European Community
(EC) or European Free Trade Area.
● The product is installed and used in accordance with
our instructions and is only used domestically, i.e. a
normal household.
● The product is installed taking into account
regulations in your new country.
Before you move please contact your nearest Customer
Care Centre, listed below, to give them details of your
new home. They will then ensure that the local Service
Organisation is aware of your move and able to look
after you and your appliances.
France
Senlis
+33 (0) 344 62 29 29
Germany
Nurnberg
+49 (0) 800 234 7378
Italy
Pordenone
+39 0434 39 4700
Sweden
Stockholm
+46 (0) 8 672 53 90
UK
Luton
+44(0) 8705 727 727
Ireland
Dublin
+353 (0)1 4090751
Exclusions
This guarantee does not cover:
●
●
Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
Products of Zanussi Electrolux manufacture which
are NOT marketed by Zanussi Electrolux.
Damage or calls resulting from transportation,
improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.
Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.
24
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Should the appliance power supply cable need to
be replaced, this should be carried out by our
Service Force Centre.
Technical Specifications
DIMENSIONS
Height
Width
Depth
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
WATER PRESSURE
MAX LOAD CAPACITY
85 cm
60 cm
59 cm
230-240 V/50 Hz
2050 W (10A)
Minimum
Maximum
0.05 MPa
0.80 MPa
Washing
Cotton, linen
Synthetics
Delicate fabrics
Wool/Handwash
Drying
Cotton, linen
Synthetics
SPIN SPEED
Maximum
CONSUMPTION DATA FOR WASHING
6 KG NORMALLY SOILED COTTON
ITEMS AT 60°C + OPTION 40°AA SELECTED
Energy
Water
Time
6.0 kg
2.5 kg
2.5 kg
2.0 kg
3.0 kg
2.0 kg
1200 rpm (ZWD 1272 W)
1400 rpm (ZWD 1472 W - ZWD 1472 S)
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
25
1.02 kWh
49 litres
142 mins
Unpacking
Fill all the holes with the plastic plugs supplied with the
instruction booklet.
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
Using a spanner unscrew and remove the two rear
bottom screws. Slide out the two plastic pins.
Lay the machine gently on its back, making sure that the
hoses are not squashed.
P1128
P0002
Important !
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
In case of moving out the same precautions as per
paragraphe “The dangers of freezing” must be taken
i.e. the residual water in the hoses must be pumped out.
Positioning
P0001
P1129
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not
impeded by carpets, rugs etc. Check that the machine
does not touch the wall or other kitchen units.
Never place cardboard, wood or similar materials under
the machine to compensate for any unevenness in the
floor.
Your new washing machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to a suitable existing tap with the
drain hose discharging into a sink.
The appliance has an inlet hose, with female 3/4” BSP
thread connector. If this connection is not compatible
with the plumbing of the existing installation, a variety
of connectors are available from good hardware stores
and plumbers merchants to suit most domestic
plumbing. Any alteration to your existing plumbing
must be carried out by a competent person, or qualified
plumber.
Remove the polystyrene block from the bottom of the
machine and release the two plastic bags.
Very carefully slide out the left polythene bag, removing
it towards the right and then downwards.
1
2
3
P1124
P1126
Repeat the operation for the right polythene bag,
removing it towards the left and then upwards.
Installation on a Suspended Floor
Suspended wooden floors are particularly susceptible to
vibration. To help prevent vibration we recommend you
place a waterproof wood panel, at least 15 mm thick
under the appliance, secured to at least 2 floor beams
with screws. If possible install the appliance in one of
the corners of the room, where the floor is more stable.
P1127
Remove the polystyrene base.
Set the machine upright and unscrew the remaining rear
screw. Slide out the relevant pin.
26
Water inlet
Connect the hose supplied with the machine to a tap
with a 3/4” thread.
Do not use already employed hoses.
“U” piece
supplied
P1199
Place the drain hose into your standpipe, which should
have an internal diameter of approximately 38mm thus
ensuring there is an air break between the drain hose
and standpipe.
P1088
38 mm (11.2”)
standpipe
diameter
30 cm (12")
Installation should comply with local water authority
and building regulations’ requirements.
The appliance must be connected to a cold water
supply only.
A minimum water pressure of 0.05 MPa (0.5 bar) is
required for safe operation of the appliance.
P1074
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
There should be a minimum distance of 5.02m
(161/2 ft) between the appliance’s inlet and the bottom
of the water storage tank.
Set the hose correctly by loosening the ring nut. After
positioning the inlet hose, be sure to tighten the ring nut
again to prevent leaks.
When discharging into a standpipe ensure that the top of
the standpipe is no more than 90cm (35.4'') and no less
than 60cm (23.6'') above floor level.
Max. 90 cm (35.4”)
Min. 60 cm (23.6”)
3 pin
P1039
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
If your drain hose looks like this (see below) you do not
require the “U” piece”. Just push the hose firmly into
the standpipe.
P0021
Water drainage
This appliance is designed to be permanently plumbed
into your home's drainage system using one of the
following methods.
1. Into a drainage standpipe.
Firstly form a hook in the end of the drain hose using
the “U” piece” supplied.
P1212
27
2. Onto a sink outlet spigot.
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
Some vibration is inevitable, especially if mounted on a
wooden floor.
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
Special conditions
P1197
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
Push the drain hose onto the spigot and secure with a
clip if required, ensure a loop is formed in the drain
hose (see diagram) to prevent waste from the sink
entering the washing machine.
Warning
The machine should NOT be placed on deep pile
carpeting.
Note
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
Loop
P1198
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
In the interest of the environment
Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
It is essential that these appliances are not connected to
the surface water drainage system as this water is
discharged directly into a river or stream and may cause
pollution.
If you require any further advice please contact your
local water authority.
Important
Before connecting up the machine to new pipework or
to pipework that has not been used for some time, run
off a reasonable amount of water to flush out any debris
that may have collected in the pipes.
Levelling
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level and
stable (check diagonally).
P1051
28
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
- Earth
Blue
- Neutral
Brown
- Live
GREEN & YELLOW
SHOWER
E
TOILET
13 A
SINK
BATH
BIDET
N
WASHING
MACHINE
L
BROWN
DISHWASHER
RAINWATER
'RUN-OFF'
BLUE
P1041
CORD CLAMP
FOUL DRAIN
SURFACE WATER
DRAINS & SEWERS
FOUL SEWERS
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
earth symbol
or coloured green and yellow.
The wire coloured blue must be connected to the
terminal marked «N» or coloured black.
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
SEWAGE
TREATMENT
WORKS
UNTREATED
DISCHARGE
TREATED
DISCHARGE
RIVER
RIVER
P0987
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
WARNING:
A cut off plug inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely. Should the appliance power supply
cable need to be replaced, this must be carried
out by our Service Force Centre.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any liability should
this safety measure not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. The rating plate is located at the top of the
rim of the open door.
Note
When the appliance is installed the power supply cable
must be accessible.
Permanent connection
Mo
Pro d. .....
d.
No .....
. .....
.....
.
Ser
. No
. .....
....
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.
The switch must not break the yellow and green earth
cable at any point.
Mod. ..........
Prod. No. ...........
P0042 BD
Ser. No. .........
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363/A) fuse
must be used.
Should the plug need to be replaced for any reason,
proceed as described below.
29
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum
cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150
countries around the world.
© Electrolux plc 2006
Download PDF