DRC-DTZ Certificate of Conformance (Bureau Veritas)

DRC-DTZ Certificate of Conformance (Bureau Veritas)
BV.AVS.4.12.1404SCC-02
Issuing Center: ANTWERP
Page 1/2
BUREAU
VERITAS
CERTIFICATE OF CONFORMITY
To ICAD Annex 14 - Fifth Edition - Current edition
(Standards and recommended practices)
To ICAD Aerodrome Design Manual - Part 4
Products:
AD Lights type DRCIDTZ xxxxxxxxx White, Red
Manufactured by ADB
Applications: LED Runway Centre Line High Intensity Bidirectional
Inset light and Runway Touchdown Zone High Intensity Unidirectional
Inset light
- were found in conformity with:
• the catalogue sheet A.03.51 0
• the ICAO Annex 14 - Volume I - §5.3.12 & 5.3.13 for light output
- Date of inspection: April 20th , 2012.
- and have been, upon request of:
ADB
Leuvensesteenweg, 585
B - 1930 ZAVENTEM - BELGIUM
- inspected in conformity with the applicable requirements of
• the catalogue sheets A. 03 .510
• the ICAO Annex 14 - Volume I - §5.3.12 & 5.3.13 for light output
Mr Rudi VANDENBEMPT
Inspector Industry
BUREAU VERITAS ANTWERP
April 20 th , 2012
Particulars of inspection: detailed hereafter
This certificate is only valid for a period of 5 years from the issuance date, as far as no changes of
production process, equipment characteristics nor of applicable requirements occurs during this
period of validity
BV.AVS.4.12.14045CC-02
Issuing Center: ANTWERP
Page 2/2
BUREAu
VERITAS
The following survey operations have been carried out without noticeable remark:
•
Attendance to tests at the Laboratory premises of the manufacturer:
o Examination of test equipment
o Checking of installation of units before testing
o Attendance to photometric tests per applicable procedures and method
o Attendance to the Colorimetric tests per applicable procedure & method
•
Test results are detailed in the attached test records.
CONCLUSION
Taking into account the satisfactory results of actual tests and examinations we confirm
that the manufacturing and the test results for the above specified units are in
conformity with applicable standards, specifications and data sheets.
(Details of standards and specifications are indicated on page 1 of this certificate and
data sheet as per catalogue).
ENCLOSURE
Test records of testing which have been attended, duly stamped for identification by
BUREAU VERITAS:
Photometric test reports:
• Results of intensity values inside the beam
• Isocandela curves
• Colorimetry
Mr Rudi VANDENBEMPT
Inspector Industry
BUREAU VERITAS ANTWERP
April 20 th , 2012
This certificate is only valid for a period of 5 years from the issuance date, as far as no changes of
production process, equipment chara cteristics nor of applicable requirements occurs during this
period of validity
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement