Blaupunkt | Montana RDM 169 | Operating instructions | Blaupunkt Montana RDM 169 Operating instructions

Radio / CD
Tokyo RDM 169
Operating instructions
Manuel d’utilisation
Instrucciones de manejo
Instrução de serviço
Installation instructions
Instructions de montage
Instrucciones de montaje
Instruções de montagem
2
1
13
3
12
4
5
10
11
9
8
7
6
19
14
Optional / Tilval /
Opcional / Opção
18
2
15
21
1
3
2
17
16
20
KeyCard theft protection system 13
Putting the unit into operation .............. 13
Removing the KeyCard ........................ 13
“Training” a KeyCard/Replacing a
KeyCard ................................................ 13
Displaying the radio data ...................... 14
Short Additional Memory (S.A.M.) ........ 14
Optical display as theft protection ........ 14
Care of your KeyCard ........................... 14
Lost or damaged KeyCard ................... 14
Selecting the operating mode .... 15
Optimizing display legibility ....... 15
Radio operation with RDS ........... 16
Activating/deactivating the RDS ........... 16
AF - Alternative frequency .................... 16
Selecting a band ................................... 16
Station tuning ........................................ 17
Scrolling through the broadcasting
networks (FM only) ............................... 17
Inserting a CD ....................................... 23
Removing a CD .................................... 23
Switching on CD operation ................... 23
Switching on CD changer operation ..... 23
Selecting the display mode .................. 24
Selecting CDs and titles ....................... 24
Repeating tracks/CDs ........................... 24
Notes on making the settings ............... 28
Assistance in setting your equalizer ..... 29
DSC programming ....................... 30
DEUTSCH
Overview of the DSC factory settings .. 33
Setting the equalizer .................... 28
ENGLISH
CD operation / CD changer
operation ....................................... 23
Setting the clock ................................... 27
Displaying the clock .............................. 27
Correcting the clock after the power
has been disconnected ......................... 27
Deactivating the hour correction
function ................................................. 27
FRANÇAIS
Clock - Time .................................. 27
ITALIANO
What you need to know ........................ 12
Traffic safety ......................................... 12
Installation ............................................. 12
Telephone mute .................................... 12
Accessories .......................................... 12
Guarantee/warranty .............................. 12
International telephone information ...... 12
NEDERLANDS
Important notes ............................ 12
TPM (Track Program Memory) ............. 24
Storing tracks with TPM .................... 25
Switching TPM playback on/off ......... 25
Deleting the TPM .............................. 25
MIX ........................................................ 25
To alter the setting: ............................... 25
SCAN .................................................... 26
Entering CD names .............................. 26
Deleting CD names/TPM with DSC
UPDATE ............................................... 26
Specifications ............................... 33
Amplifier ................................................ 33
Tuner ..................................................... 33
CD player .............................................. 33
Glossary ........................................ 34
Index .............................................. 35
Installation instructions ............ 138
3
ESPAÑOL
Steering wheel remote control ... 11
Changing the memory bank ................. 17
Storing stations ..................................... 17
Automatically storing the strongest
stations with Travelstore ....................... 18
Recalling stored stations ...................... 18
Scanning stored stations with Preset
Scan ...................................................... 18
Scanning stations with Radio Scan ...... 19
Changing the scan time ........................ 19
Selecting the seek tuning sensitivity .... 19
Switching from stereo to mono (FM) .... 19
Automatic bandwidth adjustment
(SHARX) ............................................... 19
PTY - Program Type ............................. 20
Program type ........................................ 20
Checking the program type of the
station ................................................ 20
Displaying the selected program type .. 20
Selecting a program type .................. 20
Storing program types ....................... 21
Scanning stations with PTY SCAN ... 21
PTY priority ........................................ 22
PORTUGUÊS
Quick Reference ............................ 4
SVENSKA
Table of contents
Quick Reference
1 Unlocking the fold-down operating
panel
It is possible to insert or remove the
KeyCard and the CD when the operating panel is unlocked.
To unlock the panel press 1, the operating panel will fold down. The operating panel cannot be removed. Do not
use the panel as a rest or shelf.
To lock the panel, push it back into its
starting position (arrow 3).
2 ON
Switching the unit on:
With the KeyCard inserted, press ON
briefly.
The unit will begin to play in the operating mode selected last at the pre-set
volume.
2
To switch off the unit:
Press ON for approx. 1 second.
1
3
For safety’s sake, the operating
panel must remain locked when
the vehicle is in motion.
When you leave the vehicle, unlock the panel and remove the
KeyCard to protect the equipment
against theft.
4
The viewing angle of the display can
be adjusted individually to ensure optimum legibility. If necessary, refer to
the section on “Optimizing the display
legibility”.
Switching the sound on/off:
Press ON briefly. When the sound has
been switched off, “MUTE” will appear
in the display.
The sound can be switched on again
by turning the volume knob 3.
Switching the unit on/off with the
KeyCard:
The unit switches on or off when the
KeyCard is inserted or removed.
Refer to section @ in the Quick Reference on the KeyCard theft protection
system.
Switching the unit on/off with the
ignition:
If the unit has been connected accordingly, it can be switched on and off
with the car ignition.
After you switch off the ignition, a double beep will sound to remind you to
remove the KeyCard and take it with
you.
Switching the unit on with the ignition switched off:
After you have switched off the ignition
(KeyCard is inserted in the unit), you
can continue to operate the unit as follows:
After the double beep press ON.
The unit will switch on.
After the unit has played for an hour it
will switch off automatically to prevent
the car battery from running down.
Menu level 1
Station keys and memory levels
Menu level 2
Adjusting the radio functions
While listening to the radio you can
press TU to switch between menu level 1 and menu level 2.
The unit will return to menu level 1 automatically 8 seconds after the last key
is pressed.
ITALIANO
BND
Selects the band and memory level
(FM I, FM II, FM T, AM, AMT).
NEDERLANDS
ST1 - ST6
On this memory level it is possible to
store radio stations on the FM levels I, II
and “T” on the keys marked ST1 to ST6.
6 stations each can be stored for the
AM banks AM and AMT.
Storing a radio station - Press one of
the station keys from ST1 to ST6 until
it is possible to hear the program again
(beep).
Recalling a radio station - Select the
desired band. Press NEXT to select
the memory level required and press
the corresponding station key briefly.
SCA - Scan
a) PTY is switched off
(lettering is lit normally, not highlighted
in the display)
Press SCA briefly (Radio Scan) “SCAN” will flash in the display alternately with the abbreviation for the station being scanned. All of the radio
stations within reception range will be
scanned.
5
SVENSKA
Radio operation
NEXT - FM
Switches between the memory levels
for FM I, FM II, FM T.
NEXT - AM
Switches between the AM banks AM
and AMT.
ESPAÑOL
4 Softkeys / Display
Softkey = key with different functions
The functions which appear in the display can be selected.
NEXT - FM
Switches between the memory levels
for FM I, FM II, FM T.
NEXT - AM
Switches between the AM and AMT
memory banks.
PORTUGUÊS
The volume level selected will appear
in the display. When the unit is
switched on, it will automatically play
at the pre-set volume (ON VOL).
It is possible to adjust the ON VOL (refer to “DSC programming - ON VOL”).
FRANÇAIS
ENGLISH
3 Adjusting the volume
Turn the knob to adjust the volume as
desired.
DEUTSCH
Quick Reference
Quick Reference
Press SCA for approx. 1 second
(Preset Scan) You will hear a beep and “SCAN” will
flash in the display alternately with the
abbreviation for the station being
scanned. The radio stations which
have been stored on the station keys
and which are currently within reception range will be scanned.
Stopping Radio Scan / Preset Scan:
Press SCA or the rocker switch once
again.
b) PTY is switched on
(lettering is highlighted in the display)
Press SCA the stations broadcasting the programs for the PTY program type selected will be scanned.
AF (Alternative Frequency for RDS
operation)
If “AF” is highlighted in the display, the
radio will automatically search for a
6
frequency with better reception for the
station you are tuned into.
AF on/off: Press TU to select menu
level 2 and press AF longer than 2
seconds until you hear a beep.
RDS on/off: Press TU to select menu
level 2 and press AF briefly.
EXIT
Press this key briefly to end or cancel
an adjustment.
“PTY” must be highlighted in the display (press PTY if necessary).
Now it is possible to select a program
type and store it on one of the station
keys.
Press << >> to activate the PTY program types and press the station keys
to store them (press the key for approx. 2 seconds, until you hear a
beep).
CD and changer operation
ENT (Enter)
Press this key briefly to accept or store
an adjustment.
TS (Travelstore)
If you press TS, the radio will switch to
FMT or AMT from any other bank. The
six stations with the strongest reception will be stored automatically. After
the stations have been stored, the radio will tune into the station with the
best reception and begin to play.
PTY
(Program Type)
With PTY the station keys become program type keys.
Use the corresponding softkeys to select MIX, SCAN, RPT (Repeat) and
TPM in CD and changer operation.
MIX
CD tracks will be played in random order.
Press the MIX key to select the following functions:
Start Scan:
Press SCA. The tracks will be scanned
in ascending order one after the other.
The scan time can be adjusted (see
“DSC programming - SCANTIME”).
Stop Scan:
Press SCA. The track scanned last will
begin to play.
CLR
To clear the TPM memory. (See the
section on “TPM - Deleting the memory”)
5 TA
To activate/deactivate the RDS function.
FRANÇAIS
If you press the rocker switch when the
unit is on menu level 2, it will automatically return to menu level 1.
ENGLISH
Radio operation
/
ITALIANO
TPM - Track Program Memory
To store and play your favorite tracks
in CD or changer operation. Up to 30
CDs for the CD drive and up to 99 CDs
in the CD changer can be stored in the
system with a maximum of 40 tracks
each. (See the section on “TPM - Programming”)
6 Rocker switch
Station seek tuning
up
down
<< / >> down/up in short intervals
(for FM only when AF and PTY are
switched off)
For FM only:
<< / >> Pages through the station chain
with AF on and PTY off
e.g.: NDR 1, 2, 3, 4, ...
NEDERLANDS
SCA - Scan
Scans the tracks (the tracks of all the
CDs for changer operation).
- REP TRCK = Repeat track
- REP CD = Repeat CD (for changer
operation only)
- RPT OFF = switches the function off
SVENSKA
- MIX CD = the tracks on the CD will
be played in random order.
If you are using a CD changer, the
CDs will be selected in numerical order and the tracks in random order.
- MIX MAG (for changer operation
only) = all of the tracks on all of the
CDs in the magazine will be played
in random order.
- MIX OFF = switches the function off.
DEUTSCH
Quick Reference
PORTUGUÊS
ESPAÑOL
RPT - Repeat
CD tracks or CDs in the CD changer
can be repeated as often as desired.
Press the RPT key to select one of the
following functions:
7
Quick Reference
CD and changer operation
<< / >> Select CD (for changer operation
only)
>>
up: Press briefly
<<
down: Press briefly
/
Select track
up: Press briefly
CUE - fast forward (audible):
Hold pressed down
down: Press twice or repeatedly
briefly
To restart the track: Press briefly
REVIEW - fast reverse (audible):
Hold pressed down
Additional functions for the rocker
switch:
Other adjustments are possible with
AUD
8
DSC-MODE 7
PTY
DPE
as long as the corresponding function
is activated.
8
7 DSC (Direct Software Control)
Using DSC it is possible to adjust the
programmable basic settings and
equalizer settings.
Further information: “DSC programming” and "Setting the equalizer".
8 AUD
Adjusts treble, bass, balance (left/
right), fader (front/rear) and loudness.
Loudness = Boosts low frequency for
more bass and a better adjustment to
the human ear.
For FM, AM, CD and AUX it is possible
to store different treble, bass and loudness settings.
How to make the settings:
Select the operating mode.
Press AUD once, “BASS” and the level
currently selected will appear in the
display.
Use << / >> to select the different
modes.
Use / to make the corresponding
settings.
The settings selected will appear in the
display. The setting selected last will
be stored automatically.
Special Loudness feature:
Press / to select the setting from
LOUD 6 to LOUD OFF.
Switching off AUD:
Press EXIT or AUD.
If you do not alter any of the settings,
AUD will switch off automatically after
8 seconds.
NDR2
FM
I, II, T
Press DIS for approx. 2 seconds:
Display will alternate between the
clock and the band (incl. the memory
level).
M
MT
PTY
AF
CD operation
lo
Press DIS briefly:
- Track number, clock
- Track number, time played
- CD name, track number
EQ
DISC-IN
- station name
- band
- memory level I, II or Travelstore
- AM band
- AM memory level Travelstore
- Program type is activated
- Alternative frequency for
RDS
- Seek tuning sensitivity adjustable with DSC
- Equalizer is switched on
- CD is inserted in the unit
ENGLISH
FRANÇAIS
ITALIANO
TRACK 13 - CD track number
or
VIVALDI - CD name
or
CD 5 T 2 - CD number and track number
(changer operation)
MIX
- CD tracks can be played in
random order
SCA
- CD tracks are being scanned
RPT
- Repeat function for CD/
changer operation
TPM
- Store and play favorite CD
tracks
CLR
- Delete TPM memory
NEDERLANDS
: Display
SVENSKA
Press DIS briefly:
- Name of the current radio station
- Current frequency
- PTY code
This will not work properly unless the
radio is able to receive an RDS station
in adequate reception quality.
Press DIS briefly:
- CD number, track number, clock
- CD number, track number, time
played
- CD name, track number
FM I, II, T
or
AM,AMT
or
00:20
or
12:50
ESPAÑOL
Radio operation
Changer operation
- FM memory level
- band or AM memory level T
PORTUGUÊS
9 DIS
Selects different display modes.
DEUTSCH
Quick Reference
- Time played
- Clock
9
Quick Reference
< CD
Switches to CD operation
= TU (TUNER)
Switches to radio operation. Switches
to the memory levels/bands FM I, FM
II, FMT (Travelstore), AM and AMT
(Travelstore).
> CD insert
When the CD is inserted with the label
facing up, it will be automatically transported into the operating position. The
unit will automatically switch to CD
play.
? Visual theft protection
The following conditions must be fulfilled before the light diode will flash as
a visual indication of theft protection:
The unit is switched off;
The ignition is switched off;
The operating panel is folded down;
The KeyCard has been removed;
10
The DSC menu settings is switched to
LED ON (factory setting).
For more information, refer to “DSC
programming, LED ON/OFF”.
@ KeyCard theft protection system
The KeyCard must be inserted before
the unit can be operated.
Make sure to read the information in
the section on “KeyCard theft protection system”.
A Eject
Press the CD eject button briefly and
the CD will eject.
KeyCard
Inserting the KeyCard
Press 1 to unlock the operating panel; it will fold down forwards.
Insert the KeyCard with the contact
points facing down (see illustration).
Lock the operating panel.
2
; CDC
Switches to changer operation (only if
a changer is connected).
If there is no changer, the system will
switch to AUX as long as AUX ON is
switched on in the DSC menu.
1
3
Perform these steps in the reverse order to remove the KeyCard.
For safety’s sake, the operating
panel must remain locked when
the vehicle is in motion.
When you leave the vehicle, unlock the panel and remove the
KeyCard to protect the equipment
against theft.
/
Radio operation
19
18
Station seek tuning
up
down
E
Sound mute on/off:
briefly. When the sound has
Press
been switched off “MUTE” will appear
in the display.
20
ITALIANO
NEDERLANDS
<< / >> Select CD (for changer operation only)
>>
up: Press briefly
<<
down: Press briefly
/
SVENSKA
C SRC (Source)
Switches operating modes
- Radio
- CD
- Changer (if a changer is connected)
CD and changer operation
Select track
up: Press briefly
CUE - fast forward (audible):
Hold pressed down
down: Press twice or repeatedly briefly
To restart the track: Press
briefly
REVIEW - fast reverse (audible): Hold pressed down
ESPAÑOL
B V- / V+
Volume control
For FM only:
<< / >> Pages through the station
chain with AF on and PTY off
e.g.: NDR 1, 2, 3, 4, ...
PORTUGUÊS
21
FRANÇAIS
<< / >> down/up in short intervals
(for FM only when AF and
PTY are switched off)
DEUTSCH
D << / >>,
ENGLISH
Steering wheel remote control unit (optional)
11
Important notes
What you need to know
Installation
Guarantee/warranty
Before using your new car audio system,
please read through the following information carefully.
If you would like to install your new car stereo yourself or add other audio components
to existing ones, then please read the enclosed instructions on installation and connection carefully.
The coverage of the guarantee is determined by the laws in the country where the
unit was purchased.
Regardless of the legal guarantee regulations, Blaupunkt affords a 12-month guarantee.
If you have any questions about the guarantee, please contact your dealer. Your cash
register receipt is a valid guarantee coupon.
Traffic safety
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times. Never use your car audio system in a way that could distract you.
Please keep in mind that you travel a distance of approx. 45 feet per second at a
speed of only 32 mph.
Telephone mute
If you have installed a car telephone in your
vehicle, it is possible to automatically mute
the radio or CD playback when you use the
telephone (telephone mute). “PHONE” will
then appear in the display.
Should the traffic situation become particularly demanding, we advise you not to use
the audio system.
Accessories
Always make sure that you are still able to
hear any warning signals coming from outside the vehicle, such as police or fire engine
sirens, so that you can react accordingly.
Use only Blaupunkt-approved accessories
and spare parts.
You can use the following Blaupunkt products with this unit:
Consequently, you should always select a
moderate volume for playing your car audio
system while you are driving.
Amplifiers
All Blaupunkt amplifiers
12
CD changers
The following CD changers can be connected directly: CDC A 06, A 072, A 08, IDC A
09.
The A 05 and the A 071 can be connected
with the adapter cable 7 607 889 093.
International telephone information
Have you got any questions on the operation of this equipment or do you require more
information?
Give us a call!
Our numbers are:
Phone:
800-266 25 28
Fax:
708-681 71 88
In addition, the settings activated before the
radio is switched off, such as the band, station, AF, REG ON/OFF, SCANTIME, seek
tuning sensitivity, ON VOL and SHARX will
also remained stored.
This ensures that you will find your basic
settings re-adjusted automatically as soon
as you have inserted your KeyCard.
Putting the unit into operation
• Turn on the set with ON.
To insert the KeyCard, unlock the operating
panel by
• pressing 1, the operating panel will
fold down.
•
Push the card in to the right as far as
possible and remove it to the front.
•
Push the operating panel back into position.
1
For safety’s sake, the operating
panel must remain locked when
the vehicle is in motion.
When you leave the vehicle, unlock the panel and remove the
KeyCard to protect the equipment
against theft.
3
•
Push the card in the direction of the arrow (2) and lock the operating panel
back into position (arrow 3).
The car radio is now ready for operation.
If a wrong KeyCard is inserted, then “CARD
ERR” will appear in the display.
The system will switch off after approximately ten seconds.
If another card type is inserted (e.g. phone
or credit card), the display will show
“WRONG KC” for approximately two seconds.
“Training” a KeyCard/Replacing
a KeyCard
When the unit is in operation with the first
KeyCard, you can “train” another one to be
also used with the set.
Remove the wrong card and insert the correct KeyCard.
If you want to “train” a KeyCard:
• Insert the first KeyCard and turn on the
set.
•
•
Press ON to turn on the set.
Press the DSC button and press
to select “LEARN KC”.
ENGLISH
Press 1, the operating panel will fold
down forwards.
FRANÇAIS
•
ITALIANO
Preset button assignments, bass, treble,
balance and fader settings, loudness, beep
volume, LOW-EQ and HIGH-EQ.
To unlock the operating panel:
NEDERLANDS
2
If you use two KeyCards, the settings stored
on the first card will be transmitted to the
second. However, you can individually store
the following functions:
Removing the KeyCard
SVENSKA
If you have lost your KeyCard or if it was
damaged, you can buy a new one from your
specialized dealer.
Insert the KeyCard with the contacts
facing down as shown in the illustration (arrow 1).
ESPAÑOL
•
/
PORTUGUÊS
This car radio comes equipped with two KeyCards.
DEUTSCH
KeyCard theft protection system
• Press << or >>.
The display will switch to “CHANGE”.
13
KeyCard theft protection system
Remove the first KeyCard and insert
the new one while “CHANGE” still appears in the display.
After the display indicates “LEARN OK” or
“LEARN KC”,
• press DSC.
Now you can also use the new KeyCard for
operating your unit.
Short Additional Memory
(S.A.M.)
A maximum of two cards can be used with
the set.
The selectable text with a maximum of 162
characters can be programmed by any dealer who has the required programming equipment available.
•
If you attempt “train” a third Card, the access authorization for the KeyCard not used
for the “training” process will be deleted automatically.
The second KeyCard can be programmend
by your dealer to read out short information,
which will run through the display, for example, the phone number of your car dealer or the emergency call number of your
automobile association.
Optical display as theft protection
Displaying the radio data
Flashing light diode ?
You can use the KeyCard supplied with your
set to display the radio pass data such as
the model name, product number (7 6 ...)
and serial number.
When the vehicle is stationary and the KeyCard has been removed, the light diode can
be switched to flash for extra anti-theft security.
Please refer to the section on “DSC programming - READ KC”.
For this it is necessary that the positive power supply line and the permanent +12 V lead
are connected such as described in the installation instructions.
Make sure that the unit is switched off; the
operating panel is unlocked; the KeyCard
has been removed; “LED ON” has been
selected in the DSC mode (factory setting).
If necessary, please refer to the section on
“DSC programming - LED”.
14
Switching off the flashing light diode
The flashing light can be switched off by
selecting “LED OFF” in the DSC menu.
Care of your KeyCard
To ensure that the KeyCard will function
properly it is important that the contacts are
free from any foreign particles. Avoid direct
skin contact.
If necessary, clean the KeyCard contacts
using a cotton swab soaked in rubbing alcohol.
Lost or damaged KeyCard
If the KeyCard for your unit is lost or damaged you can train a new KeyCard.
You can purchase the new KeyCard from
any authorized dealer. You will also require
the master code for the unit, which you will
get from your authorized dealer.
You can select from among the following
operating modes: radio (TU), CD and CDC
(changer).
The viewing angle of the display can be altered to allow optimum legibility.
• Press DSC.
CD cannot be selected unless a CD is inserted in the drive.
CDC cannot be selected unless one of the
Blaupunkt changers, the A 06, the A 072,
the A 08, the A09, the A 05, or the A 071
has been connected and there is at least
one CD in the magazine.
•
ITALIANO
FRANÇAIS
Press the lower part of the rocker
switch until “ANGLE” appears in the
display.
Press << / >> to set the best viewing
angle for your position.
When you have completed the setting
• press DSC.
ESPAÑOL
SVENSKA
NEDERLANDS
•
PORTUGUÊS
To switch the operating mode:
• press TU, CD or CDC.
If you press TU again, the unit will switch to
menu level 2. On this level it is possible to
adjust the functions for radio operation. The
unit will switch back to menu level 1 automatically approx. eight seconds after the last
adjustment was made.
DEUTSCH
Optimizing display
legibility
ENGLISH
Selecting the operating
mode
15
Radio operation with RDS (Radio Data System)
The Radio Data System offers you more
convenience when you listen to FM radio
stations.
More and more radio stations have begun
to broadcast RDS information alongside
their programs.
As soon as a program has been identified,
the station name including a regional identifier, if available, will appear in the display.
When RDS is activated, the preset buttons
become program buttons. You now know
exactly which program you have tuned into,
making it easy to find the desired station
quickly.
AF - Alternative frequency
The AF (Alternative Frequency) function
makes sure that the strongest frequency of
the currently selected program is always
tuned in automatically.
Switching AF on/off:
For radio operation
• Press TU, menu level 2 will appear.
•
Press the AF button until you hear a
beep.
The function is activated when “AF” lights
up in the display.
If the reception quality of the selected program deteriorates beyond a certain point:
• Tune into another station.
Note: AF will be deactivated if you switch
RDS off.
Selecting a band
With this car radio you can select between
the following bands:
FM 87.7 - 107.9 MHz
AM 530 - 1710 kHz
• Select the desired band by pressing
TU, menu level 2 will appear in the display.
Activating/deactivating the RDS
Switching RDS on/off:
For radio operation
• Press the TA button briefly.
The setting selected will appear briefly in the
display. When RDS has been activated, the
AF key will be highlighted in the display.
While searching for the strongest reception
signal, the radio may switch to mute briefly.
If “SEARCH” appears in the display when
you switch on the radio or recall one of the
stored frequencies, this indicates that the
unit is automatically searching for an alternative frequency.
“SEARCH” will disappear from the display
when the alternative frequency has been
found or after the frequency band has been
run through completely.
16
Menu level 2
•
Press BND (as often as required) to
select the band.
The radio will switch through the bands as
follows: FM I, FM II, FMT, AM, AMT.
Press / ; the car radio will automatically search for the next station.
If you hold / on the rocker switch pressed
up or down, seek tuning will speed up in upwards or downwards direction.
•
Press << >>; the frequency will change
in short intervals downwards or upwards.
If you hold the right or left part of the rocker
switch pressed down, the frequency scan
will accelerate.
You can shift between the FM memory
banks I, II and T and the AM memory banks
M and MT in order to store stations and recall them later. The currently selected memory bank is indicated in the display.
•
Press NEXT as often as necessary until the desired memory bank lights up
in the display.
Manual tuning with << >>
You can also tune into a station manually.
In this case:
AF and PTY must be switched off (i.e. the
symbols do not light up in the display).
NEDERLANDS
You can use the << >> buttons to tune into
stations in your reception area.
Important:
a) You must have tuned into the station
at least once before. To do this, you
can press TS to start Travelstore in
menu level 2.
b) AF is switched on and PTY is switched
off. If necessary, switch these functions on or off in menu level 2.
Scrolling
If it is possible to receive several programs
in the same broadcasting network, you can
scroll through them forwards by pressing >>,
or backwards by pressing <<, e.g. NDR 1,
2, 3, 4, ... .
Storing stations
On FM, you can store six stations on the
preset buttons ST1 - ST6 for each of the
memory banks I, II and T.
On AM/AMT, you can also store six stations
each.
• Press TU, menu level 2 will appear in
the display.
•
Press BND to select the band.
•
Use the rocker switch to tune into a
station (either automatically / or
manually << >>).
PORTUGUÊS
Seek tuning
Up
Down
<< Down in short intervals
(for FM only: “AF” must be switched off)
>> Up in short intervals
(for FM only: “AF” must be switched off)
ITALIANO
Scrolling through the broadcasting networks (FM only)
ENGLISH
•
Manual tuning:
FRANÇAIS
/
Changing the memory bank
SVENSKA
Automatic tuning
If necessary, deactivate these functions in
menu level 2.
ESPAÑOL
Station tuning
DEUTSCH
Radio operation with RDS (Radio Data System)
17
Radio operation with RDS (Radio Data System)
•
Press the desired preset button until
the radio resumes play after the muting
(takes approximately 2 seconds, confirmed by a beep).
Now the station has been stored.
has been completed, the radio will play the
station with the strongest reception (ST 1).
Note:
Should you tune into a station which has
already been stored before on another memory bank, the corresponding preset button
and the memory bank will flash briefly in the
display.
Recalling stored stations
Automatically storing the
strongest stations with Travelstore
You can automatically store the six most
powerful FM and AM stations in your current reception area sorted according to their
signal strength. This function is particularly
con-venient on longer trips.
• Press TU, menu level 2 will appear in
the display.
• Press TS briefly.
“T-STORE” will flash in the display.
The six strongest FM or AM stations will be
automatically stored on the memory bank T
(Travelstore). If it is not possible to receive
six stations, the remaining presets will be
marked by four dashes. When this process
18
If desired, stations can also be stored manually on the Travelstore bank (see “Storing
stations”).
You can recall any stored station at the touch
of a button.
FM
Recall the stations on the memory bank
selected directly:
• by pressing ST1 - ST6.
To select a station on a different bank:
• Press NEXT as often as necessary until the desired memory bank appears
and then select the station by pressing
ST1 - ST6.
AM
You can select the stations stored for the
selected bank directly:
• by pressing ST1 - ST6.
To select a station on a different bank:
• Press NEXT as often as necessary until the desired memory bank AM or
AMT appears and then select the station by pressing ST1 - ST6.
Scanning stored stations with
Preset Scan
You can have all of the stored stations briefly
scanned on all bands and in the selected
FM memory bank.
Preset Scan cannot be started unless PTY
is switched off (“PTY” is not highlighted in
the display).
If necessary, switch off PTY on menu level
2. To do so
• press TU and switch off the function by
pressing the corresponding key.
To start Preset Scan:
• Press SCA for approx. 1 second.
All of the stored stations on the band selected and within reception range will be
scanned one after the other. “SCAN” and
the station name or frequency will flash alternately in the display.
Selecting the seek tuning sensiIf necessary, switch off PTY on menu level tivity
2. To do so
• press TU and switch off the function by
pressing the corresponding key.
To start the Scan function:
• Press SCA briefly.
All of the stations on the band selected and
within reception range will be scanned one
after the other. “SCAN” and the station name
or frequency will flash alternately in the display.
If you would like to switch to mono, refer to
“DSC programming - STEREO/MONO”.
The mode selected is indicated briefly in the
display.
Automatic bandwidth adjustment (SHARX)
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).
In the DSC menu, you can use the SHARX
function to adjust the bandwidth in the FM
frequency range. This can be a great advantage when there are a large number of
stations within your current reception range.
If “lo” does not light up, the radio will also
pick up weaker, more distant stations (high
sensitivity).
Interference with strong adjacent stations
can be reduced to an absolute minimum if
you activate SHARX ON (factory setting).
If you want to alter the sensitivity level,
please refer to the section on “DSC programming - LO/DX”).
If necessary, refer to the section on “DSC
programming – SHARX”.
You can alter the automatic seek tuning
sensitivity.
19
ENGLISH
FRANÇAIS
ITALIANO
Please refer to the section on “DSC programming - SCANTIME”.
The unit will automatically switch to mono if
the signal received is not strong enough for
stereo playback.
NEDERLANDS
Radio Scan cannot be started unless PTY
is switched off (“PTY” is not highlighted in
the display).
The scan time can be set from between five
to a maximum of 30 seconds.
If reception is poor, you may get better
sound quality by switching from stereo to
mono in the DSC menu. Each time the radio is switched on, stereo playback is activated automatically.
SVENSKA
You can also scan all of the stations within
reception range.
Changing the scan time
Switching from stereo to mono
(FM)
ESPAÑOL
Scanning stations with Radio
Scan
To select a scanned station and switch
off the Radio Scan function:
• Press SCA or the rocker switch briefly.
If you do not select a station, the scan function will automatically switch off after the frequency band has been run through completely. The unit will tune into the station you
were listening to before you started the scan
function.
PORTUGUÊS
To select a scanned station and switch
off Preset Scan:
• Press SCA or the rocker switch briefly.
DEUTSCH
Radio operation with RDS (Radio Data System)
Radio operation with RDS (Radio Data System)
PTY - Program Type
with the preset buttons ST1 - ST6.
PTY is an RDS service which an increasing
number of broadcasting stations have begun to offer. This feature allows you to select FM stations according to their program
type. After you have chosen the PTY of your
preference, the corresponding stations can
be selected either by seek tuning or using
the scan function.
Requirement: PTY must be active.
Switching PTY on/off
• Press PTY.
When the function is active, the program
type selected last will briefly appear in the
display, e.g. “SPORT”. As long as PTY is
active, “PTY” will appear permanently in the
display.
Program type
Use << >> to have the last selected program
type displayed and to choose a new one.
You can select any one of the stored types
20
The following list indicates all of the program
types which are currently available.
The letters printed in bold are identical to
the abbreviation which appears briefly in the
display.
NEWS
INFORM
SPORTS
TALK
ROCK
CLS ROCK
ADLT HIT
SOFT ROCK
TOP 40
COUNTRY
OLDIES
SOFT
NOSTALGA
JAZZ
CLASSICAL
R+B
SOFT R+B
LANGUAGE
REL MUSIC
REL TALK
PERSNLTY
PUBLIC
WEATHER
Checking the program type of the station
On menu level 2
• Press PTY for approx. 2 seconds.
After the beep tone the display will show the
program type offered by the station currently playing.
If “NONE” appears in the display, the current station has no PTY code.
Displaying the selected program type
• Press << or >>.
The program type selected last will be displayed briefly.
Selecting a program type
a) Using the preset buttons
When PTY is switched on, you can use
the preset buttons ST1 - ST6 to select
the program types stored at the factory.
• Press one of the presets ST1 - ST6.
The selected program type will be displayed for 2 seconds.
If you would like to listen to a station
with this PTY,
• press /
function.
to start the seek tuning
• Press << or >>; the program type selected last will be displayed for 3
seconds.
• During this period press >> (forwards) or << (backwards) to select
the desired type.
• Press << or >> as many times as required.
If you would like to listen to a station
with the selected PTY,
To do so, make sure that “PTY” lights up in
the display.
• If necessary, press the PTY button to
switch on the function.
•
Select a program type using buttons
<< >> and
•
hold down the desired preset button
(ST1-ST6) until you hear a beep.
Now the selected program type can be recalled by pressing this preset when PTY has
been activated. (“PTY” appears in the display.)
to start the seek tuning
PORTUGUÊS
• press /
function.
If desired, you can also replace these with
other available program types.
SVENSKA
When PTY is switched on, you can select a program type using buttons
<< >>.
To switch off PTY-SCAN:
• Press SCA or the seek-tuning rocker
switch once again.
After the entire band has been scanned, the
PTY-SCAN function will be turned off automatically.
ESPAÑOL
b) Using the << >> buttons on the rocker
switch
Each of the preset buttons ST1 - ST6 has
been assigned one program type at the factory.
DEUTSCH
Storing program types
Requirement: “PTY” must appear in the display.
• Press the SCA button.
All of the stations in your current reception
area offering the selected program type will
be scanned.
ENGLISH
You can assign different program types to
each preset position. Please refer to the next
section on “Storing program types”.
Scanning stations with PTY SCAN
FRANÇAIS
If the radio is unable to find a station offering the selected program type, the display
will show “NO PTY” and a beep tone will be
emitted. The radio will select the station
which was tuned into before seek tuning was
activated.
NEDERLANDS
If the radio is unable to find a station offering the selected program type, the display
will show “NO PTY” and a beep tone will be
emitted. The radio will select the station
which was tuned into before seek tuning was
activated.
ITALIANO
Radio operation with RDS (Radio Data System)
21
Radio operation with RDS (Radio Data System)
PTY priority
Example:
Situation:
-
Station playing: #1.
PTY is switched on and lights up in the display.
-
“PTY” lights up in the display.
-
Program type “POP” selected.
No station offering the selected program
type can be found currently in your reception range (with seek tuning or scan).
-
Seek tuning is started.
-
No station with “PTY-POP” can be
found.
-
The display shows “NO PTY” and
-
automatically switches back to #1.
-
#2 airs a “PTY-POP” program.
-
The radio will switch to the linked station #2 for the duration of the “POP”
program.
The set will switch back to the station previously tuned into.
As soon as it is possible to receive a program in the broadcasting network with the
PTY selected, the radio will switch over to
the corresponding station for the duration
of the program.
During CD operation, the set will also switch
to the program offering the selected PTY
within the broadcasting network.
After the PTY program has ended the system will switch back to the previous mode
(radio or CD).
Note:
As already mentioned, these functions are
not supported by all of the RDS stations at
the present time.
22
Switching on CD operation
Make sure that a disc is inserted, “DISC-IN”
will appear in the display.
• Press CD, the CD functions will appear
in the display (track number, name/
playback time).
Inserting a CD
Switch on the unit and press 1 to unlock the operating panel.
The operating panel will fold down forward.
•
•
Insert a CD (with the label facing up).
Never use force.
To protect the CD mechanism, do not impair or try to help the automatic insertion and
ejection of the disc in any way.
If the CD is not removed from the drive within
approximately 30 seconds, it will be re-inserted automatically.
ITALIANO
Switching on CD changer operation
Make sure that at least one CD has been
inserted into the magazine.
• Press CDC, the CDC functions will appear in the display (track number,
name/playback time).
NEDERLANDS
Fold down the operating panel and
press the Eject button (arrow) for approx. 1 second.
The CD will be ejected.
Changer operation
•
ESPAÑOL
CD operation
Removing a CD
For safety’s sake, the operating
panel must remain locked when
the vehicle is in motion.
PORTUGUÊS
Use only standard circular CDs measuring
12 cm in diameter!
CDs measuring 8 cm in diameter or promotional CDs in different shapes such as a butterfly or beer mug are not suitable for playback using this equipment.
This is very likely to result in the destruction
of the CD or the CD drive.
We assume no liability for damage to the
equipment caused by playing unsuitable
CDs.
FRANÇAIS
Note:
ENGLISH
The CD will be transported to its playing
position automatically. CD playback will
start.
• Push the operating panel up on the
left-hand side and lock it into position.
SVENSKA
You can play CD on this unit. In addition,
CDs can be played on the Blaupunkt CD
changers, CDC A 05, A 06, A 071, A 072, A
08, IDC A 09.
These changers can be purchased at any
authorized retail outlet.
DEUTSCH
CD operation / CD changer operation
23
CD operation / CD changer operation
Selecting the display mode
Selecting CDs and titles
Repeating tracks/CDs
You can select the desired display mode for
CD and CD changer operation:
You can use the rocker switch to conveniently select CDs, tracks or passages. You
cannot select CDs unless a CD changer has
been connected.
You can repeat a track or a CD (in changer
operation) as often as desired. Use the RPT
key to select the following functions:
- REP TRCK = Repeat track
- REP CD = Repeat CD (changer operation only)
- RPT OFF = Repeat function off
•
•
Press DIS as often as necessary until
you have selected the desired display
mode.
“CD 10”
– The CD number (for
changer operation only).
“TRACK 13” – Track number
“14:34”
– Clock
“00:20”
– The elapsed playback time
“VIVALDI”
– CD name
The CD name will not be displayed unless it
has already been entered.
Please refer to the section on “Entering CD
names”.
24
<< / >> CD selection (changer operation only)
>>
Up: Press briefly
<<
Down: Press briefly
/
Track selection
Upwards: Press briefly.
CUE - fast advance (audible): Hold
pressed down.
Downwards: Press twice or as many
times as required.
To re-start a title: Press briefly.
REVIEW - fast reverse (audible):
Hold pressed down.
The rocker switch acts as a sequence switch
so that you can skip over several CDs or
tracks if you press it repeatedly.
Press RPT as many times as necessary until you have selected the desired setting.
The CD or the track will repeat until you
press RPT to switch off the function with
“RPT OFF”.
TPM
(Track Program Memory)
Use this feature to program and play your
favorite CD tracks in CD and changer operation. Up to 30 CDs can be managed in the
CD mode, up to 99 discs in the CDC mode,
with a maximum of 40 tracks each. TPM can
only be used in the mode it was stored in
(CD or changer operation).
Storing tracks with TPM
Deleting the TPM
MIX
A track can only be stored while it is playing.
You can delete the tracks stored with TPM.
TPM tracks can be deleted with CLR only
when they are playing.
• Switch on TPM.
“TPM” will be highlighted in the display.
In this case, “CLR” will appear below
TPM.
If you would like to delete the track playing
•
press CLR for approx. 2 seconds,
“TRCK CLR” will flash briefly in the display.
If you would like to delete all of the tracks
on the CD playing
•
press CLR for approx. 5 seconds,
“DISC CLR” will flash briefly in the display.
If you would like to delete all of the tracks
on all of the CDs in the magazine in changer operation
•
press CLR for approx. 8 seconds,
“ALL CLR” will flash briefly in the display.
If you would like to delete the TPM and the
CD names at the same time, refer to the
section on “Deleting CD names/TPM with
DSC UPDATE”.
You can have the CD tracks played in random order. The MIX function is active when
“MIX” is highlighted in the display.
If “TPM” is highlighted in the display, this
means that TPM playback is active. All of
the tracks on the CD stored in this operating mode will be played. If you activate SCA
(scan) as well, these tracks will be scanned.
TPM playback cannot be activated unless
you have already stored tracks with the TPM
function.
CDC A 08, IDC A 09: All tracks on the CDs
in the magazine will be played in random
order.
CDC A 05, A 06, A 071 and 072: The CDs
in the magazine are selected at random and
then the tracks on the CD selected are
played in random order.
MIX OFF
The Mix function is deactivated. Discs and
titles will be selected in numerical order.
To alter the setting:
•
Press MIX briefly, the function selected
will appear briefly in the display.
FRANÇAIS
ITALIANO
MIX MAG (for changer operation only)
NEDERLANDS
Press TPM briefly. The mode selected
will appear briefly in the display (TPM
ON/OFF).
The tracks on the selected CD will be played
in random order. The next disc will be selected in numerical order. MIX (random order) applies to the playback of the tracks.
SVENSKA
•
MIX CD
ESPAÑOL
Switching TPM playback on/off
You can choose the following MIX functions:
PORTUGUÊS
To store a track
• press TPM for approx. 1 second, “TPM
PROG” will appear in the display.
This track has been stored.
ENGLISH
DEUTSCH
CD operation / CD changer operation
25
CD operation / CD changer operation
SCAN
•
Use this function to scan all of the CD tracks.
To start the Scan function:
• Press SCA briefly, the display will indicate “SCAN”.
The titles will be scanned one after the other in ascending order.
To stop the Scan function:
• Press SCA once again briefly.
The track currently scanned will continue to
play.
SCAN will also stop if you press the rocker
switch, MIX, RPT, DSC, AUD, TU or CDC.
Entering CD names
You can enter names for up to 30 discs and
in changer operation for up to 99 discs.
The specified name (e.g. VIVALDI) will appear in the display if you have selected the
corresponding display mode with DIS.
To start the entry:
• Press the DSC button and press
as often as necessary until “CDNAME” appears in the display.
/
• Press << >>.
The position for the first character will begin
to flash.
26
Use the rocker switch / to select
the first character.
The capital letters A to Z, the numbers 0 to
9 and special characters will be listed one
after the other.
• Use the rocker switch << >> to move
to the next position and select a character.
You can select up to eight characters in this
way.
Once you have completed the name as desired:
• Press ENT in order to store it.
To quit the naming mode,
• leave the DSC menu by pressing DSC.
If you would like to name another CD,
• insert a new disc for CD operation
Or
•
You can delete the name stored for the CD
in the CD drive and its TPM with “CLR
DISC”.
Use “CLR ALL” to delete the names and
TPM for all of the CDs.
Insert the CD for which you want to delete
the name into the CD drive.
• Press DSC.
•
Press / as many times as required
until “UPDATE” appears in the display.
•
Press >> to select “CLR DISC” if you
want to delete the name and TPM of
that CD,
or
•
Press << to select “CLR ALL” to delete
the names and TPM stored for all of
the CDs.
•
press << / >> for changer operation
•
and press / to select another CD in
the magazine.
You can change any existing name by entering and storing a new one (overwriting).
Deleting CD names/TPM with
DSC UPDATE
Use the UPDATE feature to delete the CD
names and the TPM at the same time.
Press ENT for approx. 1 second.
“DELETING” will appear briefly in the
display.
The deletion process is complete.
To return to “UPDATE” in the DSC menu
without deleting the CD names and TPM:
• Press ENT.
Setting the clock
a) automatically
The clock is set automatically when the
radio is tuned into an RDS station
which has the “CT” function (clock
time).
b) manually with DSC-CLOCKSET
• Press DSC briefly, “CLOCKSET” will
appear in the display.
• Press << >> to set the hours/minutes. You can move to a different position by pressing / .
• After you have set the clock, press
ENT briefly to store the new setting.
CD mode:
You can select from among three different
display modes:
- Track number, clock
- Track number, playback time elapsed
- CD name, track number
To switch between the modes
• press DIS briefly.
Correcting the clock after the
power has been disconnected
If the radio has been disconnected from its
power source for a longer period of time,
“0:00” will appear in the display when it is
re-connected.
Deactivating the hour correction
function
In the DSC menu it is possible to switch off
the hour correction function with “CLK MAN/
CLK AUTO”. An automatic correction for
minutes will continue to take place.
This is useful if you would like to display the
time for a different time zone, for example.
If necessary,
• Press DSC briefly and
•
Press / as often as required until
“CLK MAN/CLK AUTO” appears in the
display.
To deactivate the hour correction function
press << >> to select “CLK MAN”.
The time will be set automatically by RDSCT, but can also be adjusted manually if
desired.
DEUTSCH
ENGLISH
PORTUGUÊS
The automatic correction of the time cannot
be switched off completely.
You can switch between clock display and
band (incl. memory bank). To do so
• press DIS for approx. 2 seconds.
If you want to set the time manually, refer to
the section on “DSC programming - CLOCKSET”.
FRANÇAIS
Radio mode:
You need only set the time manually if it is
not possible to receive an RDS station with
CT (clock time).
ITALIANO
For the clock to function properly with RDS,
an RDS station with the CT function (CT –
clock time) must be received.
You can set the clock to permanent display
in both the radio and CD modes.
NEDERLANDS
Displaying the clock
ESPAÑOL
This car stereo is equipped with a built-in
clock which automatically takes advantage
of RDS to ensure highly accurate time-keeping (hours, minutes).
SVENSKA
Clock - Time
27
Setting the equalizer
The acoustic characteristics of the car interior affect the quality of the sound reproduced in your vehicle to a much greater extent than the speakers.
The individual steps you have to take to
make these settings are described in the
table.
Position, installation and the rear volumes
of, for example, the door or rear window
shelf all play an important role.
Notes on making the settings
Even the sound produced by well selected
and installed speakers can be affected negatively by resonance frequencies in the vehicle interior.
As a result, the bass sounds may be lost or
reverberate, the mid-range tones sound too
overpowering and music instruments or
voices may be distorted or the total sound
quality may be completely lifeless.
The overall sound quality can be greatly
enhanced if certain frequencies are suppressed or boosted.
This car stereo is equipped with 2 parametric filters. The first filter “LOW EQ” can be
set from 32 to 500 Hz, the second filter
“HIGH EQ” from 630 to 10000 Hz. In this
context, parametric means that it is possible to set the frequency and either boost or
reduce it (+10 to –20 dB) individually for
each of these filters.
These parametric filters can be adjusted to
very exact settings even without the help of
measuring instruments.
28
The following notes are intended as recommendations only. They do not necessarily
reflect your own personal sound preferences.
We recommend that you use a music CD
you are familiar with to make the settings.
The CD should include tracks with different
instruments and vocals. Purely electronic
music is not well suited to serve as a basis
for making the settings because the original
sounds cannot be determined.
Before you set the equalizer, set bass, treble, balance and fader to “0”.
This setting is described in the Quick Reference under 8 AUD.
Now listen to the CD you have selected.
Evaluate the sound according to your own
personal preferences.
Now refer to “Sound impression/problem” in
the table and you will find suggestions to
eliminate any problems under “What to do”.
Make the settings for bass and the lower
mid-range tones with the LOW EQ filter,
select HIGH EQ for treble and mid-range
tones.
The “HIGH EQ” and “LOW EQ” filters can
be set in the DSC menu:
•
Press DSC.
•
Press / as often as necessary until
“HIGH EQ” or “LOW EQ” appears in
the display.
•
Press << or >> once and
•
Set the level in the following table by
pressing / .
•
Press << >> to switch the frequency
range.
• Press ENT to store your settings.
You can switch the equalizer on and off by
pressing AUD for approx. 2 seconds.
Now you can compare the sound produced
by your car stereo with and without the
equalizer.
DEUTSCH
Setting the equalizer
Assistance in setting your equalizer
Notes
Bass
30 – 100 Hz
Bass reproduction too weak
Boost the bass with the
“LOW EQ” filter
Frequency: 50 to 100 Hz
GAIN: +4 to +6 dB
Avoid distortion.
Boost the level carefully if the
speaker diameter is too small.
Unclear bass
Playback reverberates
Unpleasant pressure on the ears
Reduce the lower mid-range
with the “LOW EQ” filter
Frequency: 125 to 400 Hz
GAIN: approx. –4 dB
The tone may become too lean
and aggressive.
Pay attention to the underlying
tone of the music.
Sound appears to be too much in
the foreground, very aggressive,
no stereo effect
Reduce the mid-range with
“HIGH EQ” filter
Frequency: 1000 to 2500 Hz
GAIN: -4 to –6 dB
Playback should not be too
quiet.
Tone too powerless.
Lifeless reproduction
Lack of transparency
Instruments do not sparkle
Boost treble range with
“HIGH EQ” filter
Frequency: approx. 10 kHz
GAIN: +2 to +4 dB
Avoid a piercing type of tone.
Strong hissing sound unpleasant.
Treble
4000 to 20000 Hz
ESPAÑOL
Mid-range sound
400 – 4000 Hz
PORTUGUÊS
Lower mid-range
100 – 400 Hz
ITALIANO
What to do
NEDERLANDS
Sound impression/problem
SVENSKA
Frequency range
FRANÇAIS
ENGLISH
Start to make your settings in the mid-range/treble and finish with the bass range.
29
DSC programming
The car stereo has been equipped with DSC
(Direct Software Control) to allow you to
customize certain programmable, basic settings to suit your personal needs and preferences and then store them.
The basic settings for this audio equipment
were made at the factory.
In the following you can find an overview of
these settings, so that you can always reset
to them if desired.
If you wish to alter any of the programming,
• press DSC.
Use the rocker switch and the ENT button
to select and adjust the functions de-scribed
in the following. The display will show you
the setting you have selected.
/
<< / >>
30
Select function
Adjust/recall value
LOW EQ
HIGH EQ
Equalizer setting:
To activate the frequencies
and set the level for the lower frequency range.
Refer to the detailed instructions in the section on
“Equalizer setting”.
Equalizer setting:
To activate the frequencies
and set the level for the upper frequency range.
Refer to the detailed instructions in the section on
“Equalizer setting”.
CD NAME
Only available during CD
playback.
Use this function to name
your CDs. (See “Entering
CD names”)
SHARX
Switches the bandwidth in
the FM frequency range.
When there are a large
number of stations within
your current reception
range, use << >> to switch
to SHARX ON which will
prevent most interference
from adjacent radio stations.
This function has been set
to “SHARX ON” at the factory.
HICUT
Interference-related cut in
the treble sound. Cuts the
treble when interference occurs. Can be adjusted from
NO HICUT (OFF) to HICUT
3 (highest setting). Which
setting is the most pleasant
is a matter of personal preference.
LO/DX
To adjust the seek tuning
sensitivity.
“LO” stands for local reception.
“DX” stands for distant reception.
Select “LO 3” if you want to
receive strong stations in
the local area, select “DX 1”
if you want to tune into
weaker stations which are
further away.
Adjusts the display to the individual viewing angle.
SCANTIME
Use this function to set the
scan time for the radio or
CD player from 5 to 30 seconds.
Acknowledgement tone for
all functions which require a
button to be pressed for
more than one second.
The volume can be adjusted
from between 0 to 9.
(0 = off)
DIM DAY
Use this function to select
the display brightness for
the daytime (from 1 to 9).
This menu item will not appear if a CD changer has
been connected to the system. The factory setting is
“OFF”.
If another system component is connected to AUX,
this setting must be altered
to “AUX ON”.
DEUTSCH
ENGLISH
FRANÇAIS
ANGLE
ITALIANO
The brightness changes accordingly when the car
headlights are switched
on/off.
AUX ON/OFF
BEEP
CLK AUTO/MAN
Switches the hour correction
function on/off. Read the information in the section on
“Clock, Deactivating the
hour correction function”.
12/24H MODE
Select the clock display
(12 or 24-hour display)
Use this function to select
the volume at which the radio is set when it is switched
on.
Adjust the desired volume
level with << >>.
When adjusted to “LAST
VOL”, the system will come
on at the volume selected
before it was switched off.
Use this function to select
the display brightness for
the night-time (from 1 to 9).
NEDERLANDS
ON VOL
DIM NIGHT
SVENSKA
CLOCKSET To set the clock manually.
Press << >> to set the
hours/minutes. Move to the
next flashing position by
pressing / . To store the
setting selected, press ENT
briefly.
Also refer to the section on
“CLOCK”.
CLK ON/OFF The clock display will appear when the ignition is
switched on, but the car
stereo is switched off. In this
case, set CLK ON.
PORTUGUÊS
STEREO/MONO
Switch modes by pressing
<< >>.
The mode selected will appear briefly in the display.
The radio will begin with
STEREO playback each
time it is switched on.
ESPAÑOL
DSC programming
31
DSC programming
LEARN KC
To “train” a second KeyCard.
Please read the information
in the section on “KeyCard
theft protection system” “Training a KeyCard”.
READ KC
To read out the KeyCard
data.
The card supplied with the
radio is used to display the
model name, type number
(7 6 …) and the serial
number.
With the extra card it is possible to display data entered
by your specialized dealer.
(See the section on “Short
Additional Memory S.A.M.”).
If you remove the KeyCard
during the reading process,
“READ KC” will appear on
the display panel.
LED ON/OFF Here you can choose between LED ON or LED OFF.
With LED ON, the “ON”
knob will flash for extra antitheft protection when the
unit has been switched off
and the KeyCard removed.
32
PEAK ON/OFF
Switches the dynamic level
display for the volume on/
off.
UPDATE
Use this function to delete
CD names during CD and
changer operation to make
more storage capacity available for new discs. (See
“Deleting CD names with
DSC-UPDATE”).
To quit the DSC programming mode and
store the adjustment:
• Press DSC.
Specifications
Overview of the DSC factory settings
Amplifier
4 x 25 W RMS power
acc. to DIN 45324 at
14.4 V
4 x 40 W max. power
ENGLISH
Output power:
FM sensitivity:
87.7 - 107.9 MHz
530 - 1710 kHz
0.7 µV at 26 dB
signal-to-noise ratio
ITALIANO
Bands:
FM:
AM:
FRANÇAIS
Tuner
NEDERLANDS
FM Mono sensitivity:
7.8 dBf
FM frequency response:
20 - 16000 Hz
Frequency
response:
SVENSKA
CD player
20 - 20000 Hz
ESPAÑOL
0 dB/40 Hz
0 dB/630 Hz
SHARX ON
HICUT 2
DIST 1
STEREO
0:00
CLK AUTO
24H MODE
CLK OFF
LAST VOL
3
9
9
0
10 sec.
OFF
ON
ON
-
PORTUGUÊS
LOW EQ
HIGH EQ
CD NAME
SHARX
HICUT
LO / DX
STEREO/MONO
CLOCKSET
CLK AUTO / MAN
12/24H MODE
CLK ON/OFF
ON VOL
BEEP
DIM DAY
DIM NIGHT
ANGLE
SCANTIME
AUX
LEARN KC
READ KC
LED
PEAK ON/OFF
UPDATE
DEUTSCH
DSC programming
Specifications subject to change without notice!
33
Glossary - Technical Terminology
AF - Alternative Frequency
Equalizer
In RDS this function ensures that the radio
always tunes into the frequency with the best
reception for the station.
Adjusts the frequencies to the acoustic conditions and personal tastes.
EXIT
RPT (Repeat)
Amplifier
Press to end/cancel a setting.
Repeats CD tracks. In changer operation
you can repeat single tracks or complete
CDs.
Amplifies the output power.
AUD – Audio
KeyCard
Sound settings for bass and treble, balance
(left/right) and fader (front/rear).
Theft protection system from Blaupunkt. The
car stereo cannot be operated without the
correct KeyCard.
BND (Band)
MIX
Switches between bands and memory
banks.
CDs/CD tracks are played in random order.
Changer
Switches audio off
CD changer
CL – Clear
Returns to the previous menu item.
DSC – Direct Software Control
With the help of DSC it is possible to adjust
the basic factory settings to your own personal preferences.
ENT (Enter)
Press briefly to accept/store settings.
34
MUTE
Preset Scan
Other RDS functions include:
AF – Alternative Frequency
PTY – Program type
SCAN
Briefly plays the radio stations in your current reception range or the tracks on a CD
in CD mode. Using Preset Scan you can
scan the radio stations stored on the preset
buttons.
Softkey (Software key)
Key with varying functions
See Scan
SRC - Source
PTY
Source switch between radio and CD changer.
Designed for the selection of a specific type
of program in FM (e.g. sports, news). Also
see RDS.
TPM – Track Program Memory
RDS – Radio Data System
Service provided by radio stations to enhance radio listening pleasure.
The station name, for example, is displayed
instead of the frequency.
Stores and plays your favorite tracks in CD
or changer mode.
TS – Travelstore
Automatically stores the stations with the
best reception on the station preset buttons.
Very useful during trips.
M
Adjusts the display 31
Alternative frequency 16
Assistance in setting your equaliser 29
Automatic bandwidth adjustment 19
Automatic tuning 17
ENT 6
Entering CD names 26
Equalizer 28, 29
EXIT 6
Manual tuning 17
Menu level 5
MIX 25
Mono 19
MUTE 4
Care of your KeyCard 14
CD changer operation 23, 24, 25, 26
CD operation 23
Clock 27
D
Damaged KeyCard 14
Deleting CD names 26
Deleting TPM 26
DIS 9
Display 5, 9
Display brightness daytime/night-time 31
Displaying the radio pass data 14
Glossary 34
Guarantee 12
H
HICUT 30
I
Installation 12
International telephone information 12
K
KeyCard 13
L
LO/DX 19
Lost KeyCard 14
Loudness 8
Operating mode 15
Operating panel is unlocked 4
Optimizing display 15
ITALIANO
C
G
P
Preset Scan 18
Program type 20
PTY 20
PTY priority 22
PTY SCAN 21
NEDERLANDS
19
O
R
SVENSKA
Factory settings 33
Radio Data System 16
Radio operation with RDS 16
Radio Scan 19
Remote control unit 11
Repeat 7
Repeating CDs 24
Repeating tracks 24
ESPAÑOL
Bandwidth adjustment
BND 5
F
PORTUGUÊS
B
ENGLISH
E
FRANÇAIS
A
DEUTSCH
Index
35
Index
S
T
SCAN 26
Scan time 19
Scrolling through the broadcasting networks 17
Seek tuning sensitivity 19
Selecting the display mode (CD) 24
SHARX 19
Short Additional Memory (S.A.M.) 14
Softkeys 5
Station tuning 17
Stereo 19
Storing stations 17
Switching the sound on/off 4
Switching the unit on with the ignition
switched o 4
Technical Terminology 34
Telephone information 12
Telephone mute 12
Theft protection 14
Theft protection system 13, 14
Time 27
TPM 24
Traffic safety 12
Travelstore 18
U
UPDATE 26
V
Visual theft protection
Volume 5
W
Waveband/band 16
36
10
Blaupunkt-Werke GmbH
Bosch Gruppe
7/99
K7/VKD 8 622 402 095
Download PDF