Gallagher System Integrations
Gallagher
System Integrations
Gallagher Command Centre supports integrations with a range of third party security
products, using Gallagher developed interface software and industry standard protocols. All
Gallagher system integrations are individually licensed, optional features and are supported
on specific versions of third party software.
Video Integrations
Triggering Imaging System Actions
The Gallagher Imaging Interface allows for integration with
supported DVR, NVR, CCTV or video management systems.
An integrated imaging solution links visual records to events in
Gallagher Command Centre. Recalling a specific event allows
associated stored video images to be immediately retrieved.
Depending on the imaging system capabilities, Gallagher Command
Centre can be configured to move a specific camera to a preset or
tour (pattern) in response to a Gallagher alarm or other specified
event.
Viewing Video
Within Gallagher Command Centre*, video can be viewed
• Live by the operator at any time
• In response to an event (event triggered viewing)
• Via a selected camera on the Gallagher Command Centre site plan
• Directly from a site plan by placing a camera tile over the site plan in
the location of the physical camera
• Using the find tool to search stored image sequences associated
with a particular camera
• Via playback of stored video associated with an alarm - multiple
cameras can be associated with an alarm.
* Some of the above features are only available in Command Centre Premier
Triggering Command Centre Actions
Motion detected by a camera can trigger the creation of a specific
Gallagher Command Centre alarm or DVR event. The information
sent to Gallagher Command Centre will include the camera and the
imaging system name, and a date/ time stamp in an appropriate
format. Some imaging integrations also allow you to specify the
period prior to an alarm for which video footage is retrieved, (e.g.
video will be displayed 10 seconds before the alarm occurred).
Data Storage
The Gallagher event archive includes image sequence placeholders
and any additional information stored as a result of triggered events*.
This data is preserved by the Gallagher Command Centre archiving,
backup and restore processes.
The imaging system must be networked to Gallagher Command
Centre workstations.
*Gallagher Command Centre stores events related to video but not the video
footage itself. Video footage is stored in the imaging system.
security.gallagher.co
Integration Functionality
Gallagher has developed integrations to the following imaging systems:
PELCO
BOSCH
PANASONIC
EXACQVISION
Product Number
C12629
C12554
C12579
C12589
Supported SDK
Pelco SDK V2.2
BOSCH SDK
v4.41.00.45
PANASONIC PS-API SDK
v4.00.29
Exacq DVR
v4.8.9.29032
BOSCH SDK
v4.43.04.03
live viewer: view live footage in gallagher command centre
Initiated from:
Site Plan





Master List





Challenge Viewer





Find tool





Status Viewer / Monitor
Site Viewer





Pan Tilt Zoom





Presets





Patterns

Snapshot

Camera Control:

stored viewer: view stored footage in gallagher command centre
Initiated from:
Alarm Viewer




Find tool









Other features:
Play/pause, fast forward
and rewind
Snapshot


alarms interface
Bidirectional
GallagherDVR2
1
2

Video Analytics

Monitor Switching

Check imaging system release notes for supported Command Centre versions and platform and operating system compatibility.
Refer to the release notes for a list of imaging system alarms supported by Gallagher Command Centre, eg. camera motion detection or move to preset.

ONSSI
G4S
DVTEL
Dedicated Micros
Product Number
C12619
C12563
2A8986
2A8252
Supported SDK
ONSSI Ocularis 3.5
G4S DVR System SDK v2.3.8
Latitude
v6.1 SP1
DV-IP
v04.3 (32.05)
live viewer: view live footage in gallagher command centre
Initiated from:
Site Plan




Master List




Challenge Viewer




Find tool




Status Viewer / Monitor
Site Viewer




Pan Tilt Zoom




Presets





Camera Control:
Patterns


Snapshot


stored viewer: view stored footage in gallagher command centre
Initiated from:
Alarm Viewer




Find tool








Other features:
Play/pause, fast forward
and rewind
Snapshot
alarms interface
Bidirectional
GallagherDVR2
Video Analytics
Monitor Switching

Conventional Up/Down Dispatching
Destination Based Dispatching
Elevator Integrations
Destination based dispatching
There are two types of elevator integrations, standard and
destination based dispatching.
Elevator systems supporting destination-based dispatching feature
keypads and screens located in elevator lobbies that replace
traditional elevator call buttons. Passengers enter their desired floor
before entering an elevator car, and passengers traveling to nearby
floors are grouped together by the system and directed to a specific
elevator car by destination-based dispatching system screens. This
minimizes the number of stops, and decreases congestion and travel
time – especially during peak traffic periods.
Standard Gallagher Elevator High Level Integrations (HLI) allow the
Gallagher security system to control access to floors from elevator
cars. Destination based dispatching HLIs enable elevator systems to
group passengers travelling to similar destinations for more efficient
people flow.
Standard
With a range of HLIs the Gallagher system can be integrated with
your new or existing elevator system to provide access control to
each individual floor. A Gallagher reader installed within or adjacent
to an elevator car and connected to a Gallagher Controller will
alleviate the need for the extensive I/O usage typical of low level
elevator integrations.
An access zone can be assigned to each floor that an elevator car
travels to. Floor access can be freely enabled for all passengers if
the corresponding access zone is in free access, or controlled if the
corresponding access zone is secure.
When a cardholder requires access to a secure floor via an elevator,
the Gallagher system will send a message to the elevator control
system to enable floor access corresponding to those access zones
assigned to the cardholder. Gallagher Command Centre will record
cardholder floor selections in the Gallagher event database.
Security is further enhanced by monitoring of the communications
data between the Gallagher system and the elevator system. An
alarm can be raised at the Gallagher Command Centre workstation
if the Gallagher Controller or server fails to receive a response from
the elevator system.
Elevator HLI Feature Comparison
Kone
Otis
Kone Polaris
Otis Compass DCS
Schindler Miconic
ThyssenKrupp
User specific destination control






Event Logging/Audit Trail





*
Secure/Free Floor Control




**

Tamper/System monitoring






Car Operation Panel Card Reader






Destination Control Panel Card Reader



* Does not support destination reporting ** Requires specific configuration. Schindler cannot be used for floor access mode management when
operating in this mode.
technical specifications
kone hli (standard)
MARCH 2013
Number of Gallagher Controllers
1
Number of Floors
64
Number of Elevator Shafts (Per Group Control Module)
8
Communications Protocol
RS232
Protocol Support
EPL HLI Security Protocol v2.3. An enhancement was made to this using
version 2.5 of the protocol
technical specifications
otis hli (standard)
Number of Gallagher Controllers
1
Number of Floors
64
Number of Elevator Shafts (Per Group Control Module)
8
Communications Protocol
RS232
Protocol Support
Specification for EMS - Security/BMS Protocol Otis Ref. no: 51646B
technical specifications
kone polaris
Communications Protocol
TCP/IP
Protocol Support
technical specifications
Group Controller Access Control Interface Specification 1.5
otis compass dcs
Communications Protocol
TCP/IP
Protocol Support
Compass Security Intergration Software Requirements Specification - Document # D125_SRS_CSIGeneric
technical specifications
Schindler miconic
Communications Protocol
TCP/IP
Protocol Support
technical specifications
Schindler v1.1.296
Thyssenkrupp
Communications Protocol
RS232
Protocol Support
Simple serial adaption of card reader systems to lift control system from
TKAW version 1.0
Intercom Integrations
System Division
The Gallagher Intercom HLI enables digital intercom systems
to be integrated into the Gallagher access system. This allows
intercom functionality and related intercom alarms and events to be
supported through the Gallagher Command Centre graphical user
interface by Gallagher operators.
Just like other items created in Command Centre, intercom systems
and intercoms are assigned to a division when configured. This
allows only authorized operators assigned to that division to access
intercoms and intercom systems in that division.
Multiple Intercom Systems
Multiple intercom systems can be supported in the Gallagher
system. For each intercom system, individual intercom units
are uniquely identified. The Gallagher system becomes the user
interface to control calls for the intercom system. The audio
communications remain within the originating intercom system.
Intercom Functionality
Intercom units may be associated with access controlled doors,
enabling authorized operators to open that door in response to
a call made from the intercom unit. An intercom master can be
associated with a computer running Gallagher Command Centre, for
the operator to use to respond to calls and monitor the status of the
intercom system. In addition to answering calls, Gallagher operators
with intercom operator privileges also have options to:
• Forward a call to another Gallagher workstation or intercom unit
from the same intercom system
• Place a call on hold, enabling the operator to service other calls
and return to the call when ready
• End a call
• Initiate calls
• View live video footage from a Jacques Video Intercom device
associated with an intercom call event.
‘Remote Mode’
In response to fluctuations in workload and operator requirements,
the Gallagher workstation intercom can be put into ‘remote mode’.
Calls continue to be logged in the Gallagher system but are queued
and diverted to an alternative intercom answering workstation. The
alternate workstation must be in the same or higher division. Where
‘remote mode’ is supported by the third party intercom system, it
is possible to configure the workstation to switch to ‘remote mode’
when the operator logs off their Gallagher workstation.
The Gallagher Intercom High Level Interface (HLI) feature enables
digital intercom systems such as the Jacques TCP/IP Intercom
System to be integrated into the Gallagher security system.
Audit Trail
All intercom events are recorded on the Gallagher audit trail,
including the operator who answered or initiated the call, the
intercom unit, the call duration, the time the call was made and
answered.
As at January 2013, Gallagher Command Centre supports
integration with the Jacques TCP/IP Intercom System and also
Austco Intercoms. Please contact Gallagher if integration with an
alternative intercom system is required.
Gallagher Command Centre can also interface with a number of
other third party products including: KeySafe; Security Sesnsor
Monitoring; Fuel Pump; Security Duress and Printer integrations.
Intercom Integration Feature Comparison
Product Number
JACQUES
AUSTCO
C12593
C12577
INTERCOM VIEWER: DISPLAY ALL INTERCOM CALLS FOR MANAGEMENT
Answer a call
Y
Y
End a call
Y
Y
Initiate call to intercom
Y
N
Place a call on hold
Y
N
Manually forward a call to another workstation
Y
N
Open door co-located with intercom
Y
Y
Y
N
Y
Y
INTERCOM CAMERA TILE: DISPLAY VIDEO*
Display video from intercom video enabled devices
DVR CAMERA TILE: DISPLAY VIDEO*
Display video from DVR cameras associated to intercoms
ADDITIONAL FEATURES
Automatically pop-to-front intercom viewer on incoming call
Y
Y
Automatically forward a call to another workstation (when operator
is offline)
Y
N
Display duration until unanswered call is automatically cancelled
N
Y
Intercom System connection status indicator
Y
N
Activity reporting on Intercom Calls
Y
Y
*requires independent DVR video interface
Kahikatea Drive, Hamilton 3206
Private Bag 3026, Hamilton 3240
New Zealand
TEL: +64 7 838 9800
EMAIL: [email protected]
security.gallagher.co
REGIONAL OFFICES
New Zealand.................................... +64 7 838 9800
Americas....................................... +1 888 430 0770
Asia................................................ +852 2910 7912
Australia....................................... +61 2 9412 4477
India............................................ +91 80 2661 1590
Middle East........................................+9615 808728
South Africa................................. +27 11 974 4740
United Kingdom / Europe........... +44 2476 64 1234
Disclaimer: System configuration, network capacities and the
volume of system activity affect performance. Please contact
Gallagher for advice. In accordance with the Gallagher policy of
continuing development, design and specifications are subject
to change without notice. Gallagher Group Limited is an ISO
9001:2008 Certified Supplier. Copyright © Gallagher Group
Limited 2012. All rights reserved.
3E0999 – 02/13
Gallagher World Headquarters
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement