FAQ blood pressure Transfer measurement values into Health Manager in Windows 8

FAQ blood pressure  Transfer measurement values into Health Manager in Windows 8
FAQ blood pressure
BM 58 / BC 58 / BM 65
Transfer measurement values into
Health Manager in Windows 8
You have connected your blood pressure monitor with your computer correctly, activated the
data transfer function and still get following error message?
i
,.To solve this problem, you need to update your driver software. Follow
,.the instructions below to update your driver software.
1 Open Device Manager
Right-click at the bottom to the left on your Click on "Device Manager" in the menu
desktop screen.
appearing.
Selecting driver
2
Click on "Ports (COM & LPT)" on the device
manager. Then right-click on „Prolific USBto-Serial Comm Port".
4
Click on "Driver" in the upper menu bar.
3
Click on "Properties" in the menu appearing.
5
Click on "Update Driver"
6
Click on "Browse my computer for driver
software".
8
Select the driver Prolific USB-to-Serial
Comm Port Version: 3.3.11.152 and
confirm with "Next".
7
Click on "Let me pick from a list of device
drivers on my computer".
9
The driver is now being installed.
After installation, the following window
appears.
Click on "Close".
You can now transfer your measurement
values into the Health Manager.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement