User manual | FAQ blood pressure Transfer measurement values into Health Manager in Windows 8

FAQ blood pressure
BM 58 / BC 58 / BM 65
Transfer measurement values into
Health Manager in Windows 8
You have connected your blood pressure monitor with your computer correctly, activated the
data transfer function and still get following error message?
i
,.To solve this problem, you need to update your driver software. Follow
,.the instructions below to update your driver software.
1 Open Device Manager
Right-click at the bottom to the left on your Click on "Device Manager" in the menu
desktop screen.
appearing.
Selecting driver
2
Click on "Ports (COM & LPT)" on the device
manager. Then right-click on „Prolific USBto-Serial Comm Port".
4
Click on "Driver" in the upper menu bar.
3
Click on "Properties" in the menu appearing.
5
Click on "Update Driver"
6
Click on "Browse my computer for driver
software".
8
Select the driver Prolific USB-to-Serial
Comm Port Version: 3.3.11.152 and
confirm with "Next".
7
Click on "Let me pick from a list of device
drivers on my computer".
9
The driver is now being installed.
After installation, the following window
appears.
Click on "Close".
You can now transfer your measurement
values into the Health Manager.

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project