Circuit Thermal Protection Thermal Protection PGS Graphite Sheet Literature Pyrolytic Graphite Sheet (PGS) Product Overview

Circuit Thermal Protection Thermal Protection PGS Graphite Sheet Literature Pyrolytic Graphite Sheet (PGS) Product Overview
PGS
Pyrolytic Graphite Sheet
Product Overview
Pyrolytic Graphite Sheet
Standard PGS Types
Type
Laminated Types (Insulation + Adhesive)
Adhesive Types
PGS Only
S Type
A - A Ty p e
A-M Type
Front Face
Insulative Adhesion
Type: 30 µm
Rear Face
Graphite Sheet
Graphite Sheet
Acrylic Adhesive
Tape 30 µm
Insulative Thin
Adhesion Type: 10 µm
A-PA Type
A-PM Type
Polyester Tape
Standard Type 30 µm
Polyester Tape
Standard Type 30 µm
Polyester Tape
Thin Type 10 µm
Insulative Adhesion
Type: 30 µm
Insulative Thin
Adhesion Type: 10 µm
Insulative Thin
Adhesion Type: 10 µm
Polyester (PET)
Tape 30 µm
Polyester (PET)
Tape 10 µm
Polyester (PET)
Tape 30 µm
Graphite Sheet
Acrylic Adhesive
Tape 10 µm
Graphite Sheet
Graphite Sheet
A-DM Type
Graphite Sheet
Structure
PGS
Separating Paper
Features
Withstand
Temperature
Standard Size
Maximum
Size
- High Thermal
Conductivity
- High Flexibility
- Low Thermal
Resistance
- Available Up to 400°C
- Conductive Material
400°C
- With Insulation
Material on One Side
- With Strong
Adhesive Tape
for Putting Chassis
- Withstanding Voltage:
2 kV
100°C
Acrylic Adhesive
Tape 30 µm
Separating Paper
Separating Paper
- With Insulation
Material on One Side
- Low Thermal Resistance
Comparison with
A-A Type
- Withstanding Voltage:
1 kV
100°C
Acrylic Adhesive
Tape 10 µm
PGS
- With Insulation
Material on Both Sides
- Withstanding Voltage:
PET Tape: 4 kV
Adhesive Tape: 2 kV
100°C
Separating Paper
- With Insulation
Material on Both Sides
- Withstanding Voltage:
PET Tape: 4 kV
Adhesive Tape: 1 kV
100°C
Acrylic Adhesive
Tape 10 µm
Separating Paper
- With Insulation
Material on Both Sides
- Withstanding Voltage:
PET Tape: 1 kV
Adhesive Tape: 1 kV
100°C
115 x 180 mm
90 x 115 mm
90 x 115 mm
90 x 115 mm
90 x 115 mm
90 x 115 mm
180 x 230 mm
150 x 180 mm (25µm)
115 x 180 mm
115 x 180 mm
115 x 180 mm
115 x 180 mm
115 x 180 mm
1
Website: www.panasonic.com/pgs
[email protected]
1-800-344-2112
Copyright © 2012 Panasonic Corporation of North America.
All Rights Reserved. Specifications are subject to change without notice.
PGS Product Overview, FY12
PGS
Pyrolytic Graphite Sheet
Product Overview
High Heat Resistance PGS Types
Pyrolytic Graphite Sheet
Type
A - V Ty p e
High Heat Resistance
and Insulation Type 13 µm
Front Face
Rear Face
A-R V Type
High Heat Resistance and Insulation
Adhesive Type: 18 µm
High Heat Resistance and Insulation
Adhesive Type: 18 µm
A-KV Type
High Heat Resistance
and Insulation Type 30 µm
High Heat Resistance and Insulation
Adhesive Type: 18 µm
Heat-resistant
PEEK Tape 13 µm
Graphite Sheet
Graphite Sheet
Polymide Tape
30 µm
Graphite Sheet
Structure
Separating Paper
Features
Withstand
Temperature
High Resistance
Acrylic Adhesive
Tape 18 µm
PGS
- With High Heat resistance
and Insulation Tape on
One Side
- Withstanding Voltage
Adhesive Tape: 2 kV
Separating Paper
High Resistance
Acrylic Adhesive
Tape 18 µm
- With High Heat resistance
and Insulation Tape on
Both Sides
- Withstanding Voltage
PEEK Tape: 2 kV
Adhesive tape: 2 kV
150°C
150°C
High Resistance
Acrylic Adhesive
Tape 18 µm
PGS
Separating Paper
- With High Heat resistance
and More Insulated Tape
on Both Sides
- Withstanding Voltage
PI Tape: 5 kV
Adhesive tape: 2 kV
150°C (Polymide: 180°C)
Standard Size
90 x 115 mm
90 x 115 mm
90 x 115 mm
Maximum
Size
115 x 180 mm
115 x 180 mm
115 x 180 mm
2
Website: www.panasonic.com/pgs
[email protected]
1-800-344-2112
Copyright © 2012 Panasonic Corporation of North America.
All Rights Reserved. Specifications are subject to change without notice.
PGS Product Overview, FY12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement