Edimax | 3G-6200nL | User manual | Edimax 3G-6200nL User manual

Инструкция
Edimax 3G-6200nL
Перейти в карточку товара
8 800 775 98 98
л чит т нич
ю н льт цию.
гл т чн . Б з вы дны
www.sotmarket.ru
д бн я инф м ция
тзывы, бз ы и
т в
ы
,
1
English
Copyright© by Edimax Technology Co, LTD. all rights reserved. No part of
this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any
form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of this Company .
This company makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Any
software described in this manual is sold or licensed "as is". Should the
programs prove defective following their purchase, the buyer (and not this
company, its distributor, or its dealer) assumes the entire cost of all necessary
servicing, repair, and any incidental or consequential damages resulting from
any defect in the software. Further, this company reserves the right to revise
this publication and to make changes from time to time in the contents hereof
without obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly
different from those shown in this QIG. For more detailed information about this
product, please refer to the User Manual on the CD-ROM. The software and
specifications are subject to change without notice. Please visit our web site
www.edimax.com for the update. All rights reserved including all brand and
product names mentioned in this manual are trademarks and/or registered
trademarks of their respective holders .
Notice according to GNU/GPL-Version 2
This product includes software that is subject to the GNU/GPL-Version 2.
You find the text of the license on the product cd/dvd. The program is free
software and distributed without any warranty of the author. We offer, valid
for at least three years, to give you, for a charge no more than the costs of
physically performing source distribution, a complete machine-readable
copy of the corresponding source code.
Please contact Edimax at: Edimax Technology co., Ltd, NO. 3, Wu-Chuan
3rd RD Wu-Ku-Industrial Park, Taipei Hsien, Taiwan. R.O.C., TEL :
+886-2-77396888, FAX : +886-2-77396887, sales@edimax.com.tw
2
CATALOG
Chapter I : Product Information .................................................................................. 5 Chapter II: System and Network Setup ........................................................................ 12 2-1 Establish network connection ............................................................................ 12 2-2 Setup client computers to obtain IP address automatically .............................. 13 2-2-1 Windows 95/98/Me IP address setup: ................................................ 14 2-2-2 Windows 2000 IP address setup: ........................................................ 16 2-2-3 Windows XP IP address setup: ........................................................... 18 2-2-4 Windows Vista IP address setup: ........................................................ 20 2-3 Connect to broadband router by web browser .................................................. 22 2-4 Using ‘Quick Setup’........................................................................................... 26 2-4-1 3G/3.5G .............................................................................................. 30 2-4-2 Using ‘Dynamic IP’ as broadband connection type ........................... 39 2-4-3 Using ‘Fixed-IP xDSL’ as broadband connection type ...................... 41 2-4-4 Using ‘PPPoE xDSL’ as broadband connection type ......................... 43 2-4-5 Using ‘PPTP xDSL’ as broadband connection type ........................... 45 2-4-6 Using 'L2TP xDSL' as broadband connection type ............................ 48 2-4-7 Using 'Telstra Big Pond' as broadband connection type .................... 51 Chapter III: General Setup .......................................................................................... 52 3-1 System .................................................................................................................. 54 3-1-1 Time Zone .......................................................................................... 54 3-1-2 Password Settings ............................................................................... 56 3-1-3 Remote Management.......................................................................... 57 3-2 WAN ..................................................................................................................... 59 3-2-1 3G/3.5G .............................................................................................. 68 3-2-2 Dynamic IP ......................................................................................... 64 3-2-3 Static IP .............................................................................................. 64 3-2-4 PPPoE ................................................................................................. 66 3-2-5 PPTP ................................................................................................... 68 3-2-6 L2TP ................................................................................................... 71 3-2-7 Telstra Big Pond ................................................................................. 74 3-3 LAN (Wired) ......................................................................................................... 76 3-3-1 Start .................................................................................................... 76 3-3-2 LAN IP ............................................................................................... 78 3-3-3 DHCP Server ...................................................................................... 79 3-3-4 Static DHCP Leases ........................................................................... 80 3-4 Wireless ................................................................................................................ 82 3-4-1 Basic Settings ..................................................................................... 83 3-4-1-1 AP mode .................................................................................. 86 3
3-4-4 WPS .................................................................................................... 97 3-4-5 Wireless Schedule .............................................................................. 99 3-5 Advance Settings* .............................................................................................. 100 3-5-1 QoS ................................................................................................... 101 3-5-1-1 Basic QoS Settings ................................................................ 101 3-5-1-2 Add a new QoS entry ............................................................ 103 3-5-2 NAT .................................................................................................. 105 3-5-2-1 Virtual Server ........................................................................ 106 3-5-2-2 Special Applications.............................................................. 108 3-5-2-3 UPnP Settings ....................................................................... 111 3-5-2-4 ALG Settings......................................................................... 112 3-5-2-5 Static Routing........................................................................ 113 3-5-3 Firewall........................................................................................... 115 3-5-3-1 Access Control ...................................................................... 115 3-5-3-2 URL Blocking ....................................................................... 120 3-5-3-3 DoS ....................................................................................... 122 3-5-4 DDNS ............................................................................................... 125 3-5-5 Port Forwarding................................................................................ 128 3-5-6 DMZ ................................................................................................. 131 3-5-7 Fail Over ........................................................................................... 133
Chapter IV : Status ..................................................................................................... 135 5-1 Internet Connection ............................................................................. 137 5-2 Device Status ....................................................................................... 138 5-3 System Log .......................................................................................... 139 5-4 Security Log ........................................................................................ 140 5-5 Active DHCP Client ............................................................................ 141 5-6 Statistics ............................................................................................... 142 5-7 Modem Information ............................................................................. 143 Chapter V : Tools ......................................................................................................... 144 6-1 Configuration Tools ............................................................................. 146 6-2 Firmware Upgrade ............................................................................... 147 6-3 Restart .................................................................................................. 148 Chapter VI : Language ................................................................................................ 149 4
Chapter I: Product Information
1-1 Introduction and safety information
Thank you for purchasing Edimax 3G-6200nL wireless 3G broadband
router! This high cost-efficiency router is the best choice for Mobile /
Small office / Home office users, all computers and network devices can
share a single wireless 3G modem or xDSL / cable** modem internet
connection at high speed. Easy install procedures allows any computer
users to setup a network environment in very short time - within minutes,
even inexperienced. When the number of your computers and
network-enabled devices grow, you can also expand the number of
network slot by simple attach a hub or switch, to extend the scope of your
network!
You can configure the router by running the Setup Wizard in the
CD-ROM provided in the package. The wizard provides quick setup for
wireless 3G/3.5G Internet connection, SSID, wireless security, firmware
upgrade and changing router’s password. When you start the Setup
Wizard, you will get the following Welcome screen. Please choose the
language to start with and follow the easy steps in the Wizard. No
instruction for the Setup Wizard is given here.
If you lost the CD-ROM or you prefer the traditional web setup, please
follow the procedures in Manual to configure the router
Note 1: Only one Internet connection (wireless 3G or xDSL/Cable) can
be used at the same time.
5
Note 2: To prevent the compatibility problem between 3G USB Modem
cad and 3G router, it is recommended that you upgrade the latest
firmware of 3G router from Edimax website
http://www.edimax.com .
Features
- Provides IEEE 802.11g/b wireless LAN access point
- Compatible with IEEE 802.11n standard with 150Mbps data rate
- High Internet access throughput
- Allow multiple users to share a single Internet connection
- Supports up to 253 network client users
- Provides one USB port for 3G wireless connection
- Internet Access via 3G modem or Cable/xDSL modem
- Access Servers on your LAN from the Public Network
- Equipped with one Ethernet port for LAN or WAN
- Support DHCP (Server/Client) for easy setup
- Support advance features such as: special applications, DMZ, virtual
server, access control, firewall
- Allow you to monitor the router’s status such as: DHCP Client Log,
System Log, Security Log and Device/Connection Status
- Easy to use Web-based GUI for configuration and management
- Remote Management allows configuration and upgrades from a
remote site (over the Internet)
Minimum Requirements
- One External xDSL (ADSL) or Cable modem with an Ethernet port
(RJ-45)
- Network Interface Card (NIC) for each Personal Computer (PC)
- Computer with a Web-Browser (Internet Explorer 5.0 or higher /
Netscape Navigator 7.2 or higher)
Package Contents
- One Wireless 3G broadband router
- One Quick Installation Guide
- One CD-ROM (Wizard, Multi-languages QIG and User Manual)
- One Power Adapter
- Ethernet Cable
- Accessories
6
Note
The WAN “idle timeout” auto-disconnect function may not work due to
abnormal activities of some network application software, computer virus
or hacker attacks from the Internet. For example, some software sends
network packets to the Internet in the background, even when you are
not using the Internet. So please turn off your computer when you are
not using it. This function also may not work with some ISP. So please
make sure this function can work properly when you use this function in
the first time, especially your ISP charge you by access time.
Back Panel
The diagram (fig1.0) below shows the broadband router’s back panel.
The router’s back panel is divided into four sections, LAN, WAN, USB,
and Reset:
Figure 1.0
1) WAN/LAN Port
The Fast Ethernet port is for you to connect with xDSL/Cable modem or
connect with computer. The default setting is for you to connect with
computer or switch to extend network. If you would like to access
Internet via xDSL/Cable modem, you can login 3G-6200nL to enable
WAN function (to click
button ).
2)Antenna
For you to connect with antenna to get stronger wireless signal.
3) USB
The USB port allow you to share internet via 3G USB modem card.
4) WPS / Reset button
You can press the button 2~4 seconds to enable WPS for wireless
security.
When you experience some problem on using this router, or you forgot
7
your password, you can press the reset button for longer than 10
seconds and the router will reset itself to the factory default settings
(warning: your original configurations will be replaced with the factory
default settings)
4) Power Jack
5V2A switching power adapter.
Front Panel
On the router’s front panel there are LEDs, which shows the status of
this router. Below is the list of each LED and its description.
LED
WLAN
Light
Status
Description
On
Wireless WPS function is enabled.
Off
Wireless network is switched off.
Flashing
Wireless LAN activity (transferring or
receiving data).
ETHERNET
On
ETHERNET port is connected.
Off
ETHERNET port is not connected.
Flashing
ETHERNET activity (transferring or
receiving data).
INTERNET
On
Router is connected to the Internet.
Off
Router is not connected to the Internet.
Flashing
Router is connecting to the Internet.
8
Back Panel
Antenna A
Item Name
Description
ETHERNET
Local/ Wide Area Network (LAN/WAN) port.
Power
Power connector, connects to A/C power adapter.
Reset / WPS
Reset the router to factory default settings (clear all settings)
or start WPS function. Press this button and hold for 10
seconds to restore all settings to factory defaults, and press
this button for less than 5 seconds to start WPS function.
Antenna
It is a 2dBi dipole antenna.
USB
Connect your 3G/3.5G USB modem to the USB port to share
the 3G mobile Internet connection
9
1-2 Safety Information
In order to keep the safety of users and your properties, please follow the
following safety instructions:
1. This router is designed for indoor use only; DO NOT place this router
outdoor.
2. DO NOT put this router at or near hot or humid places, like kitchen or
bathroom. Also, do not left this router in the car in summer.
3. DO NOT pull any connected cable with force; disconnect it from the
router first.
4. If you want to place this router at high places or hang on the wall,
please make sure the router is firmly secured. Falling from high places
would damage the router and its accessories, and warranty will be void.
5. Accessories of this router, like antenna and power supply, are danger to
small children under 3 years old. They may put the small parts in their
nose or month and it could cause serious damage to them. KEEP THIS
ROUTER OUT THE REACH OF CHILDREN!
6. The router will become hot when being used for long time (This is
normal and is not a malfunction), DO NOT put this router on paper,
cloth, or other flammable materials.
7. There’s no user-serviceable part inside the router. If you found that the
router is not working properly, please contact your dealer of purchase and
ask for help. DO NOT disassemble the router, warranty will be void.
8. If the router falls into water when it’s powered, DO NOT use your
hand to pick it up. Switch the electrical power off before you do anything,
or contact an experienced technician for help.
9. If you smell something strange, or even see some smoke coming out
from the router or power supply, remove the power supply or switch the
electrical power off immediately, and call dealer of purchase for help.
10
1-3 System Requirements
Internet connection, provided by xDSL or cable modem with a RJ-45
Ethernet port.
Computer or network devices with wired or wireless network interface
card.
Web browser (Microsoft Internet Explorer 4.0 or above, Netscape
Navigator 4.7 or above, Opera web browser, or Safari web browser).
An available power socket
11
Chapter II: System and Network Setup
2-1 Establish network connection
Setup Diagram
3G/3.5G Modem card installation:
If you have 3G/3.5G modem card and SIM card, please follow the
following instructions to establish connection
1. Connect power adapter to 3G-6200nL
2. Connect another Ethernet cable from the LAN port on router to the
Ethernet socket on the PC
3. Insert SIM card into 3G/3.5G modem card, and connect the modem
card with one of USB port of 3G-6200nL. The corresponding USB
LED indicator on 3G-6200nL will light.
12
2-2 Setup client computers to obtain IP address automatically
After the network connection is established, the next step you should
do is setup the router with proper network parameters, so it can work
properly in your network environment.
Before you can connect to the router and start configuration
procedures, your computer must be able to get an IP address
automatically (use dynamic IP address). If it’s set to use static IP address,
or you’re unsure, please follow the following instructions to configure
your computer to use dynamic IP address:
If the operating system of your computer is….
Windows 95/98/Me
Windows 2000
Windows XP
Windows NT
- please go to section 2-2-1
- please go to section 2-2-2
- please go to section 2-2-3
- please go to section 2-2-4
13
2-2-1 Windows 95/98/Me IP address setup:
1. Click ‘Start’ button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network icon, and
Network window will appear. Select ‘TCP/IP’, then click ‘Properties’.
14
2. Select ‘Obtain an IP address from a DHCP server’, then click ‘OK’.
15
2-2-2 Windows 2000 IP address setup:
1. Click ‘Start’ button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network and Dial-up
Connections icon, double click Local Area Connection, and Local Area
Connection Properties window will appear. Select ‘Internet Protocol
(TCP/IP)’, then click ‘Properties’
16
2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server
address automatically’, then click ‘OK’.
17
2-2-3 Windows XP IP address setup:
1. Click ‘Start’ button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network and Internet
Connections icon, click Network Connections, then double-click Local
Area Connection, Local Area Connection Status window will appear,
and then click ‘Properties’
18
2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server
address automatically’, then click ‘OK’.
19
2-2-4 Windows Vista IP address setup:
1. Click ‘Start’ button (it should be located at lower-left corner of your
computer), then click control panel. Click View Network Status and
Tasks, then click Manage Network Connections..Right-click Local Area
Netwrok, then select ‘Properties’. Local Area Connection Properties
window will appear, select ‘Internet Protocol Version 4 (TCP / IPv4), and
then click ‘Properties’
20
2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server
address automatically’, then click ‘OK’.
21
2-3 Connect to broadband router by web browser
Default IP address of this broadband router is ‘192.168.2.1’, and you can
connect to broadband router’s web-based configuration interface by any
connected computer with web browser (Internet Explorer 5.x or above,
Firefox, or Netscape).
Please input ‘192.168.2.1’ in web browser’s address bar and press ‘Enter’
key to establish connection:
You should see the following authentication window:
22
Please input ‘admin’ in ‘User name’ field, and ‘1234’ in ‘Password’ field,
and click ‘OK’ button to enter web configuration interface.
TIPS: If you can’t establish connection with broadband router with web
browser (got ‘The page cannot be displayed’ or similar error message),
the IP address you inputted may be wrong. If you’ve changed the IP
address of this broadband router previously, please input correct IP
address instead of the default IP address ’192.168.2.1’.
If the DHCP server function of this broadband router is enabled, please
follow the following instructions to find out the IP address of this
broadband router:
23
Please click ‘start’ -> ‘run’ at the bottom-lower corner of your desktop:
Input ‘cmd’, then click ‘OK’
24
Input ‘ipconfig’, then press ‘Enter’ key. Please check the IP address
followed by ‘Default Gateway’ (In this example, the IP address of router
is 192.168.2.1, please note that this value may be different.)
NOTE: If the IP address of Gateway is not displayed, or the address followed
by ‘IP Address’ begins with ‘169’, please recheck network connection
between your computer and router, and / or go to the beginning of this
chapter, to recheck every step of network setup procedure.
If you tried the instructions listed above and still can not find the IP
address of this broadband router / you forget the password, please jump to
chapter 6-1 to reset the broadband router.
25
2-4 Using ‘Quick Setup’
This broadband router provides a ‘Quick Setup’ menu, and you can setup
basic parameters of this broadband router.
Please follow the following instructions to use ‘Quick Setup’ menu:
1. Click ‘Quick Setup’ after logged in.
26
2. In the first step of quick setup, you can setup automatic time
synchronization settings.
The descriptions of every setting items are listed as follow:
Item Name
Time Zone
Time Server Address
Daylight Savings
Description
Please select a time zone of the country or
region of your residence here. If you can’t find
the country / region of your residence here,
please select a city / region which time zone is
the same with the country / region of your
residence.
This load-balance router supports NTP
(Network Time Protocol). NTP server will
provide correct time for this router to setup the
date and time of the router automatically.
Please input the host name or IP address of
NTP server here. If you don’t know the host
name or IP address of time server, please ask
network administrator or use ‘pool.ntp.org’ as
time server.
If the country / region of your residence use
daylight saving time, please check ‘Enable
Function’ box, and select the beginning and
ending date of daylight time saving.
27
After you finish with time zone settings, please click ‘Next’ to proceed to
next step of quick setup - broadband type:
Note : The default setting is for you to connect with computer or switch
to extend network. If you would like to access Internet via xDSL/Cable
modem, you can login 3G-6200nL to enable WAN function.
Please choose the broadband (Internet connection) type you’re using in
this page. There are six types of Internet connection, they are:
3G/3.5G
Dynamic IP
Fixed-IP xDSL
PPPoE xDSL
PPTP xDSL
L2TP xDSL
- Please go to section 2-4-1
- Please go to section 2-4-2
- Please go to section 2-4-3
- Please go to section 2-4-4
- Please go to section 2-4-5
- Please go to section 2-4-6
28
Telstra Big Pond
- Please go to section 2-4-7
If you’re not sure, please contact your Internet service provider. A wrong
Internet connection type will cause connection problem, and you will not
be able to connect to internet.
If you want to go back to previous step, please press ‘Back’ button on the
bottom of this page.
NOTE: Some service providers use ‘DHCP’ (Dynamic Host
Configuration Protocol) to assign IP address to you. In this case, you
can choose ‘Cable Modem’ as Internet connection type, even you’re
using another connection type, like xDSL. Also, some cable modem
3.uses PPPoE, so you can choose ‘PPPoE xDSL’ for such cable modem
connection, even you’re using a cable modem.
29
2-4-1 3G/3.5G
3G-6200nL supports most of 3G/3.5G modem cards, just connect the
modem card to the USB port of 3G-6200nL and 3G-6200nL will
recognize it automatically, no additional setup procedure required.
However, some of modem cards require PIN code or account / password
(you have to use 3G-6200nL’s web interface to input these information),
and some modem cards requires you to connect the modem card with
your PC and install driver / utility before you connect it with 3G-6200nL
(all PCs which need to access Internet by 3G-6200nL requires to perform
this procedure once). If you still not able to connect to Internet, please use
wired Internet connection to access our website :
http://www.edimax.com/ , download latest version of firmware and
upgrade 3G-6200nL’s firmware. If you still not be able to get connected
by your 3G/3.5G modem card, please contact your dealer of purchase and
provide the model name of the 3G/3.5G modem card you have, we’ll try
our best to help you to solve the problem.
Only one Internet connection (wireless / wired) can be used at the same
time. Wireless connection (3G/3.5G) will be selected first, and use wired
Internet connection as backup. Therefore, please DO NOT connect your
3G/3.5G modem card with 3G-6200nL, or your telecomm service
provider may charge you with high communication fee. The default
setting is for you to connect with computer or switch to extend network.
If you would like to access Internet via xDSL/Cable modem, you can
login 3G-6200nL to enable WAN function. For example, if you connect
3G/3.5G modem card with 3G-6200nL when you’re using wired Internet
connection, wired connection will be dropped and use 3G/3.5G wireless
connection instead. If 3G/3.5G wireless signal reception is poor and the
connection can not be restored within 60 seconds, 3G-6200nL will use
wired Internet connection again, and will not switch back to wireless
Internet connection (This only happens with wired Internet connection is
available. If wired connection is unavailable, 3G-6200nL will try to
establish 3G/3.5G wireless connection again and again). If you want to
use 3G/3.5G wireless connection again, you need to remove 3G/3.5G
modem card from 3G-6200nL and reconnect it back after 5 seconds.
( A ) Plug and play, no setup procedure required.
Connect the USB 3G/3.5G modem card with 3G-6200nL and make sure
the corresponding USB LED indicator of 3G-6200nL lights up, then you
can use the web browser to access Internet.
30
( B ) PIN code or user name / password required:
Please check the authentication method you want to use. Most of
telecomm service providers require you to input PIN Code, please check
‘SIM’ and input the PIN code provided by telecomm service provider.
Most of options listed here are optional and you don’t have to provide
those information if telecomm service provider doesn’t provide you with
those information.
If telecomm provider provides you with username / password, please
check /User Name / Password box and input the user name / password
provided by telecomm service provider, then click ‘OK’ button. Wait for
1 minute (for 3G-6200nL to reboot), then you can access Internet.
Note: Please select “CDMA”, if your ISP provide 3G CDMA system.
( C ) Driver / Utility required on PC side
Some 3G/3.5G modem card does not work with instructions (A) or (B)
listed above (ex. BandLuxe C100S). You need to install 3G/3.5G modem
card driver / utility on every PC which needs to access Internet first. After
driver / utility installation is complete, every PC will be able to access
Internet via 3G/6200nL.
1. Plug in the BandLuxe C100S modem card to the USB port of your 31
computer. 2. The system will detect the hardware of C100S USB adapter and also the storage inside the adapter. 3. Please click “Cancel” to ignore the message of the found new hardware wizard. 32
4. Please go to “My computer”, you will see the BandLuxe C100S. Double click the device. 5. The program inside the adapter will prepare to install the driver and utility of the adapter. 33
6. Click “Next”. 7. Select “I accept the terms in the license agreement” and click “Next”. 34
8. If you want to change the destination folder, please click “Change”. Click “Next” to continue. 9. Click “install”. 35
10.The system is installing the driver and utility of the adapter. 11.Install successfully, click “Finish” to close the install wizard. 36
12.The utility of C100S will start up automaticity. Please select the “MENU” 13.Click “Setting”. 14.Select the “Auto connect on startup”. 37
15.Plug in the C100S into the USB port of the 3G router. 16.The USB adapter will get the IP address from ISP automatically. You can check the Status of the 3G 6200nL on the Web site (ex: 192.168.2.1). 17.Now you are able to connect to Internet successfully. Note : If your SIM card requires entering the PIN code, please enter into the
web management of the 3G router. In WAN setting web page, select 3G/3.5G.
Enter the PIN code of the adapter.
38
2-4-2 Using ‘Dynamic IP’ as broadband connection type
If your Internet service provider uses cable modem to provide Internet
service to you, you can select this connection type. You can also select
this connection type if your ISP tells you that they will assign you the IP
address by ’DHCP’ (Dynamic Host Configuration Protocol).
Here are descriptions of every setup items:
Item Name
Description
Host Name
Please input the host name of your computer,
this is optional, and only required if your
service provider asks you to do so.
MAC address
Please input MAC address of your computer
here, if your service provider only permits
computer with certain MAC address to access
internet. If you’re using the computer which
used to connect to Internet via cable modem,
you can simply press ‘Clone Mac address’
button to fill the MAC address field with the
MAC address of your computer.
DNS Address
If your ISP provided you DNS address, please
input the DNS IP address here.
TTL
Time-to-live (TTL) is a value in an Internet
Protocol packet that tells a network router
whether or not the packet has been in the
network too long and should be discarded.
39
If you wish to select another connection type as broadband connection
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup.
You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
40
2-4-3 Using ‘Fixed-IP xDSL’ as broadband connection type
If your ISP requires you to set a fixed IP address to establish connection,
you can use this connection type to input the IP address information
assigned by your ISP.
Please note that not only xDSL connections (like ADSL, HDSL, VDSL)
can use this connection type, you can select this connection type for all
connections that requires you to input a fixed IP address. Also, if your ISP
is assigning a fixed IP address to you by DHCP or PPPoE, do not select
this connection type. Please contact your ISP’s service hotline to make
sure you really need to use static IP as connection type.
Here are descriptions of every setup items:
Item Name
Description
IP address assigned by Please input IP address assigned by your
your by your service
service provider.
provider
Subnet Mask
Please input subnet mask assigned by your
service provider.
DNS address
Please input the IP address of DNS server
provided by your service provider.
Service Provider
Please input the IP address of DNS server
Gateway Address
provided by your service provider.
TTL
Time-to-live (TTL) is a value in an Internet
Protocol packet that tells a network router
whether or not the packet has been in the
network too long and should be discarded.
41
You must use the addresses provided by your Internet service
provider, wrong setting value will cause connection problem.
If you wish to select another connection type as broadband connection
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup.
You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
42
2-4-4 Using ‘PPPoE xDSL’ as broadband connection type
If your ISP requires you to establish Internet connection by PPPoE
(Point-to-Point Protocol over Ethernet), you can use this connection type
to establish Internet connection.
Here are descriptions of every setup items:
Item Name
User Name
Password
DNS address
Service Name
MTU
Connection Type
Description
Please input user name assigned by your
Internet service provider here.
Please input the password assigned by your
Internet service provider here.
Please input the IP address of DNS server
provided by your service provider.
Please give a name to this Internet service, this
is optional.
Please input the MTU value of your network
connection here. If you don’t know, you can use
default value.
Please select the connection type of Internet
43
connection you wish to use. There are 3
options:
‘Continuous’ - keep internet connection alive,
do not disconnect.
’Connect on Demand’ - only connects to
Internet when there’s a connect attempt,
Idle Time Out
TTL
Manual - only connects to Internet when
‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect button is
pressed.
Please specify the time to shutdown internet
connect after no internet activity is detected in
minute(s). This option is only available when
connection type is ‘Connect on Demand’.
Time-to-live (TTL) is a value in an Internet
Protocol packet that tells a network router
whether or not the packet has been in the
network too long and should be discarded.
If you wish to select another connection type as broadband connection
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup.
You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
44
2-4-5 Using ‘PPTP xDSL’ as broadband connection type
If your ISP requires you to use PPTP (Point-to-Point Tunneling Protocol)
to establish connection, you can select this connection type to establish
Internet connection.
PPTP xDSL requires two kinds of setting: WAN interface setting (setup
IP address) and PPTP setting (PPTP user name and password). Here we
start from WAN interface setting first:
Select the type of how you obtain IP address from your service provider
here. You can choose ‘Obtain an IP address automatically’ (equal to
45
DHCP, please refer to ‘Cable Modem’ section above), or ‘Use the
following IP address’ (i.e. static IP address).
WAN interface settings must be correctly set, or the Internet connection
will fail even those settings of PPTP settings are correct. Please contact
your Internet service provider if you don’t know what you should fill in
these fields.
Now please go to PPTP settings section:
Here are descriptions of every setup items:
Item Name
DNS address
User ID
Password
PPTP Gateway
Connection ID
MTU
BEZEQ-ISRAEL
Connection Type
Description
Please input the IP address of DNS server
provided by your service provider.
Please input user ID (user name) assigned by
your Internet service provider here.
Please input the password assigned by your
Internet service provider here.
Please input the IP address of PPTP gateway
assigned by your Internet service provider
here.
Please input the connection ID here, this is
optional and you can leave it blank.
Please input the MTU value of your network
connection here. If you don’t know, you can use
default value.
Check ‘Enable’ box if you’re using BEZEQ
network service in Israel. Do not check this
box if you’re using other Internet service
provider.
Please select the connection type of Internet
connection you wish to use. There are 3
options:
‘Continuous’ - keep internet connection alive,
do not disconnect.
’Connect on Demand’ - only connects to
Internet when there’s a connect attempt,
46
Idle Time Out
Manual - only connects to Internet when
‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect button is
pressed.
Please specify the time to shutdown internet
connect after no internet activity is detected in
minute(s). This option is only available when
connection type is ‘Connect on Demand’.
If you wish to select another connection type as broadband connection
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup.
You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
47
2-4-6 Using 'L2TP xDSL' as broadband connection type
If your ISP requires you to use L2TP (Layer-2 Tunneling Protocol) to
establish connection, you can select this connection type to establish
Internet connection. L2TP is another popular connection method for
xDSL and other Internet connection types, and all required setting items
are the same with PPTP connection.
Like PPTP, there are two kinds of required setting, we’ll start from ‘WAN
Interface Settings’:
Please select the type of how you obtain IP address from your service
provider here. You can choose ‘Obtain an IP address automatically’ (equal
to DHCP, please refer to ‘Cable Modem’ section above), or ‘Use the
48
following IP address’ (equal to static IP address, please refer to ‘PPPoE
xDSL’ section above).
WAN interface settings must be correctly set, or the Internet connection
will fail even those settings of L2TP settings are correct. Please contact
your Internet service provider if you don’t know what you should fill in
these fields.
Now please go to L2TP settings section:
Here are descriptions of every setup items:
Item Name
User ID
Password
L2TP Gateway
MTU
Connection Type
Description
Please input user ID (user name) assigned by
your Internet service provider here.
Please input the password assigned by your
Internet service provider here.
Please input the IP address of L2TP gateway
assigned by your Internet service provider
here.
Please input the MTU value of your network
connection here. If you don’t know, you can use
default value.
Please select the connection type of Internet
connection you wish to use. There are 3
options:
‘Continuous’ - keep internet connection alive,
do not disconnect.
’Connect on Demand’ - only connects to
Internet when there’s a connect attempt,
Idle Time Out
Manual - only connects to Internet when
‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect button is
pressed.
Please specify the time to shutdown internet
connect after no internet activity is detected in
49
minute(s). This option is only available when
connection type is ‘Connect on Demand’.
If you wish to select another connection type as broadband connection
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup.
You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
50
2-4-7 Using 'Telstra Big Pond' as broadband connection type
This connection type only works for Telstra big pond network service in
Australia. DO NOT select this connection type if you’re not using Telstra
big pond network service.
Here are descriptions of every setup items:
Item Name
User Name
Password
User device login
server manually
Login Server
Description
Please input the user name assigned by Telstra.
Please input the password assigned by Telstra.
Check this box to choose login server by
yourself.
Please input the IP address of login server here.
If you wish to select another connection type as broadband connection
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup.
You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
51
Chapter III: General Setup
The ‘General Setup’ is for you to setup “System, WAN, LAN, Wireless,
and others ( Advanced settings ) “.
Please follow the following instructions to use ‘General Setup’ menu:
1. Click ‘General Setup’ after logged in.
52
2. Five submenus will appear:
System - Basic system settings
WAN - Setup WAN port manually , default setting is disable. If you
would like enable this function. Please click
button as follows.
LAN - Setup LAN port manually
Wireless - Setup wireless interface manually
Advanced Settings - Setup advanced settings of this broadband router
LAN/WAN Switch- For you to switch type of Ethernet port
53
3-1 System
You can setup basic system settings of this broadband router in ‘System’
menu:
Please select the setting item you wish to set, then click ‘Apply’ button to
proceed. You can also click ‘Previous’ button to back to ‘System’ menu.
3-1-1 Time Zone
You can change the time zone settings of this broadband router. It’s
important to have correct date and time setting if you need to read system
log and use build-in firewall functions.
54
The descriptions of every setting item are listed as follow:
Item Name
Time Zone
Time Server Address
Daylight Savings
Description
Please select a time zone of the country or
region of your residence here. If you can’t find
the country / region of your residence here,
please select a city / region which time zone is
the same with the country / region of your
residence.
This load-balance router supports NTP
(Network Time Protocol). NTP server will
provide correct time for this router to setup the
date and time of the router automatically.
Please input the host name or IP address of
NTP server here. If you don’t know the host
name or IP address of time server, please ask
network administrator or use ‘pool.ntp.org’ as
time server.
If the country / region of your residence use
daylight saving time, please check ‘Enable
Function’ box, and select the beginning and
ending date of daylight time saving.
55
3-1-2 Password Settings
You can change the web login password of this broadband router. If you
keep using the default password ‘1234’, other people may access the
configuration interface without your permission. Please change the
password as soon as possible.
The descriptions of every setting item are listed as follow:
Item Name
Current Password
New Password
Confirmed Password
Description
Please input current password here.
Please input new password here.
Please input new password here again for
confirmation.
After you inputted current and new password, click ‘Apply’ to save
changes, or you can click ‘Cancel’ to keep current password untouched.
56
3-1-3 Remote Management
If you need to manage this broadband router outside of your LAN (i.e.
from Internet), you can use this function to assign a remote IP address
which is permitted to connect to this broadband router’s web management
interface from Internet.
If it’s not required for you to manage this broadband router from Internet,
you can disable this function to improve security.
The descriptions of every setting item are listed as follow:
Item Name
Host address
Port
Enabled
Description
Input the IP address of the remote host you
wish to initiate a management access.
You can define the port number this router
should expect an incoming connection request.
If you’re providing a web service (default port
number is 80), you should try to use other port
number. You can use the default port setting
‘8080’, or something like ‘32245’ or ‘1429’.
(Any integer between 1 and 65534)
Check this box to enable remote management
function. When this box is unchecked, no one
can access this broadband router’s
management interface from Internet.
57
Please click ‘Apply’ to save changes in this page, or you can click
‘Cancel’ to discard all settings in this page. After you click ‘Apply’ button,
you’ll see the following message:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
58
3-2 WAN
If you would like to access Internet via xDSL/Cable modem, you should
login 3G-6200nL to click “LAN/WAN Switch”
button
to enable the function.
You can setup WAN (Wide Area Network, i.e. Internet) connections of
this broadband router in ‘WAN’ menu:
Please select the WAN connection type you wish to use, then click
‘Apply’ to continue. You can also click ‘Previous’ to back to previous
page.
If you’re not sure which connection type you should use, please call your
ISP’s service hotline and ask for help. You’ll not be able to connect to
Internet with wrong connection type.
59
3-2-1 3G/3.5G
3G-6200nL supports most of 3G/3.5G modem cards, just connect the
modem card to the USB port of 3G-6200nL and 3G-6200nL will
recognize it automatically, no additional setup procedure required.
However, some of modem cards require PIN code or account / password
(you have to use 3G-6200nL’s web interface to input these information),
and some modem cards requires you to connect the modem card with
your PC and install driver / utility before you connect it with 3G-6200nL
(all PCs which need to access Internet by 3G-6200nL requires to perform
this procedure once). If you still not able to connect to Internet, please use
wired Internet connection to access our website :
http://www.edimax.com/ ,download latest version of firmware and
upgrade 3G-6200nL’s firmware. If you still not be able to get connected
by your 3G/3.5G modem card, please contact your dealer of purchase and
provide the model name of the 3G/3.5G modem card you have, we’ll try
our best to help you to solve the problem.
Only one Internet connection (wireless / wired) can be used at the same
time. Wireless connection (3G/3.5G) will be selected first, and use wired
Internet connection as backup. Therefore, please DO NOT connect your
3G/3.5G modem card with 3G-6200nL, or your telecomm service
provider may charge you with high communication fee. For example, if
you connect 3G/3.5G modem card with 3G-6200nL when you’re using
wired Internet connection, wired connection will be dropped and use
3G/3.5G wireless connection instead. If 3G/3.5G wireless signal
reception is poor and the connection can not be restored within 60
seconds, 3G-6200nL will use wired Internet connection again, and will
not switch back to wireless Internet connection (This only happens with
wired Internet connection is available. If wired connection is unavailable,
3G-6200nL will try to establish 3G/3.5G wireless connection again and
again). If you want to use 3G/3.5G wireless connection again, you need
to remove 3G/3.5G modem card from 3G-6200nL and reconnect it back
after 5 seconds.
( A ) Plug and play, no setup procedure required.
Connect the USB 3G/3.5G modem card with 3G-6200nL and make sure
the corresponding USB LED indicator of 3G-6200nL lights up, then you
can use the web browser to access Internet.
( B ) PIN code or user name / password required:
Please check the authentication method you want to use. Most of
telecomm service providers require you to input PIN Code, please check
60
‘SIM’ and input the PIN code provided by telecomm service provider.
Most of options listed here are optional and you don’t have to provide
those information if telecomm service provider doesn’t provide you with
those information.
If telecomm provider provides you with username / password, please
check /User Name / Password box and input the user name / password
provided by telecomm service provider, then click ‘OK’ button. Wait for
1 minute (for 3G-6200nL to reboot), then you can access Internet.
Note: Please choose “CDMA”, if your ISP use 3G CDMA system.
61
3-2-2 Dynamic IP
Dynamic IP means your ISP will assign an IP address to you
automatically by ‘DHCP’ (Dynamic Host Configuration Protocol).
Dynamic IP is often used by cable modem Internet connection.
Here are descriptions of every setup items:
Item Name
Host Name
MAC address
TTL
Description
Please input the host name of your computer,
this is optional, and only required if your
service provider asks you to do so.
Please input MAC address of your computer
here, if your service provider only permits
computer with certain MAC address to access
internet. If you’re using the computer which
used to connect to Internet via cable modem,
you can simply press ‘Clone Mac address’
button to fill the MAC address field with the
MAC address of your computer.
Time-to-live (TTL) is a value in an Internet
Protocol packet that tells a network router
whether or not the packet has been in the
network too long and should be discarded.
62
If you wish to select another connection type as broadband connection
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup.
You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
63
3-2-3 Static IP
Some ISP will give you a fixed IP address, and ask you to use this IP
address to establish Internet connection. In this case, you have to select
this connection type to establish connection with your ISP.
Please note that if your ISP is assigning a fixed IP address to you by
DHCP or PPPoE, do not select this connection type. Please contact your
ISP’s service hotline to make sure you really need to use static IP as
connection type.
Here are descriptions of every setup items:
Item Name
IP address assigned by
your by your service
provider
Subnet Mask
DNS address
Service Provider
Gateway Address
TTL
Description
Please input IP address assigned by your
service provider.
Please input subnet mask assigned by your
service provider.
Please input the IP address of DNS server
provided by your service provider.
Please input the IP address of DNS server
provided by your service provider.
Time-to-live (TTL) is a value in an Internet
Protocol packet that tells a network router
whether or not the packet has been in the
network too long and should be discarded.
64
You must use the addresses provided by your Internet service
provider, wrong setting value will cause connection problem.
If you wish to select another connection type as broadband connection
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup.
You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
65
3-2-4 PPPoE
If your ISP requires you to establish Internet connection by PPPoE
(Point-to-Point Protocol over Ethernet), you can use this connection type
to establish Internet connection.
Here are descriptions of every setup items:
Item Name
User Name
Password
Service Name
MTU
Connection Type
Description
Please input user name assigned by your
Internet service provider here.
Please input the password assigned by your
Internet service provider here.
Please give a name to this Internet service, this
is optional.
Please input the MTU value of your network
connection here. If you don’t know, you can use
default value.
Please select the connection type of Internet
connection you wish to use. There are 3
options:
‘Continuous’ - keep internet connection alive,
do not disconnect.
’Connect on Demand’ - only connects to
66
Internet when there’s a connect attempt,
Idle Time Out
TTL
Manual - only connects to Internet when
‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect button is
pressed.
Please specify the time to shutdown internet
connect after no internet activity is detected in
minute(s). This option is only available when
connection type is ‘Connect on Demand’.
Time-to-live (TTL) is a value in an Internet
Protocol packet that tells a network router
whether or not the packet has been in the
network too long and should be discarded.
If you wish to select another connection type as broadband connection
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup.
You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
67
3-2-5 PPTP
If your ISP requires you to use PPTP (Point-to-Point Tunneling Protocol)
to establish connection, you can select this connection type to establish
Internet connection.
PPTP requires two kinds of setting: WAN interface setting (setup IP
address) and PPTP setting (PPTP user name and password). Here we start
from WAN interface setting first:
Select the type of how you obtain IP address from your service provider
here. You can choose ‘Obtain an IP address automatically’ (equal to
68
DHCP, please refer to ‘Cable Modem’ section above), or ‘Use the
following IP address’ (i.e. static IP address).
WAN interface settings must be correctly set, or the Internet connection
will fail even those settings of PPTP settings are correct. Please contact
your Internet service provider if you don’t know what you should fill in
these fields.
Now please go to PPTP settings section:
Here are descriptions of every setup items:
Item Name
User ID
Password
PPTP Gateway
Connection ID
MTU
BEZEQ-ISRAEL
Connection Type
Description
Please input user ID (user name) assigned by
your Internet service provider here.
Please input the password assigned by your
Internet service provider here.
Please input the IP address of PPTP gateway
assigned by your Internet service provider
here.
Please input the connection ID here, this is
optional and you can leave it blank.
Please input the MTU value of your network
connection here. If you don’t know, you can use
default value.
Check ‘Enable’ box if you’re using BEZEQ
network service in Israel. Do not check this
box if you’re using other Internet service
provider.
Please select the connection type of Internet
connection you wish to use. There are 3
options:
‘Continuous’ - keep internet connection alive,
do not disconnect.
’Connect on Demand’ - only connects to
Internet when there’s a connect attempt,
Manual - only connects to Internet when
69
Idle Time Out
‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect button is
pressed.
Please specify the time to shutdown internet
connect after no internet activity is detected in
minute(s). This option is only available when
connection type is ‘Connect on Demand’.
If you wish to select another connection type as broadband connection
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup.
You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
70
3-2-6 L2TP
If your ISP requires you to use L2TP (Layer-2 Tunneling Protocol) to
establish connection, you can select this connection type to establish
Internet connection. L2TP is another popular connection method for
xDSL and other Internet connection types, and all required setting items
are the same with PPTP connection.
Like PPTP, there are two kinds of required setting, we’ll start from ‘WAN
Interface Settings’:
Please select the type of how you obtain IP address from your service
provider here. You can choose ‘Obtain an IP address automatically’ (equal
to DHCP, please refer to ‘Cable Modem’ section above), or ‘Use the
71
following IP address’ (equal to static IP address, please refer to ‘PPPoE
xDSL’ section above).
WAN interface settings must be correctly set, or the Internet connection
will fail even those settings of L2TP settings are correct. Please contact
your Internet service provider if you don’t know what you should fill in
these fields.
Now please go to L2TP settings section:
Here are descriptions of every setup items:
Item Name
User ID
Password
L2TP Gateway
MTU
Connection Type
Description
Please input user ID (user name) assigned by
your Internet service provider here.
Please input the password assigned by your
Internet service provider here.
Please input the IP address of L2TP gateway
assigned by your Internet service provider
here.
Please input the MTU value of your network
connection here. If you don’t know, you can use
default value.
Please select the connection type of Internet
connection you wish to use. There are 3
options:
‘Continuous’ - keep internet connection alive,
do not disconnect.
’Connect on Demand’ - only connects to
Internet when there’s a connect attempt,
Idle Time Out
Manual - only connects to Internet when
‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect button is
pressed.
Please specify the time to shutdown internet
connect after no internet activity is detected in
72
minute(s). This option is only available when
connection type is ‘Connect on Demand’.
If you wish to select another connection type as broadband connection
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup.
You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
73
3-2-7 Telstra Big Pond
This connection type only works for Telstra big pond network service in
Australia. DO NOT select this connection type if you’re not using Telstra
big pond network service.
Here are descriptions of every setup items:
Item Name
User Name
Password
User device login
server manually
Login Server
Description
Please input the user name assigned by Telstra.
Please input the password assigned by Telstra.
Check this box to choose login server by
yourself.
Please input the IP address of login server
here.
If you wish to select another connection type as broadband connection
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup.
You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
74
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
75
3-3 LAN (Wired)
You can setup Wired LAN (Local Area Network) connections of this
broadband router in ‘LAN’ menu. Please also note that both wired and
wireless LAN uses the same LAN IP address settings, too.
LAN settings split into 3 sections: LAN IP, DHCP Server, and Static
DHCP leases. Please refer to corresponding sections below for detailed
setup instructions.
3-3-1 Start
Before you start - Suggestions for deciding an IP address to be used with
this broadband router
Before all computers using wired Ethernet connection or wireless
connection can communicate with each other and access internet, they
must have a valid IP address.
There are two ways to assign IP addresses to computers: static IP address
(set the IP address for every computer manually), and dynamic IP address
(IP address of computers will be assigned by router automatically. It’s
recommended for most of computers to use dynamic IP address, it will
save a lot of time on setting IP addresses for every computer, especially
when there are a lot of computers in your network; for servers and
network devices which will provide services to other computer and users
that come from Internet, static IP address should be used, so other
computes can locate the server.
This broadband router has a built-in DHCP (Dynamic Host Configuration
Protocol) server, and can help you to assign IP addresses to your client
computers. Almost all network computers / devices manufactured after
year 1995 are compatible with DHCP, and you can let this broadband
router to assign the IP address to client computers / devices for you.
76
Suggestions on IP address numbering plan:
If you have no idea on how to define an IP address plan for your
network, here are some suggestions.
1. A valid IP address has 4 fields: a.b.c.d, for most of home and
company users, it’s suggested to use 192.168.c.d, where c is
an integer between 0 and 254, and d is an integer between 1
and 254. This router is capable to work with up to 253 clients,
so you can set ‘d’ field of IP address of router as 1 or 254 (or
any number between 1 and 254), and pick a number between 0
and 254 for field ‘c’.
2. In most cases, you should use ‘255.255.255.0’ as subnet mask,
which allows up to 253 clients (this also meets router’s
capability of working with up to 253 clients).
3. For all servers and network devices which will provide
services to other people (like Internet service, print service,
and file service), they should use static IP address. Give each
of them a unique number between 1 and 253, and maintain a
list, so everyone can locate those servers easily.
4. For computers which are not dedicated to provide specific
service to others, they should use dynamic IP address.
If you don’t really understand the descriptions listed above, don’t
worry! We will provide recommended setup values below.
77
3-3-2 LAN IP
If you enable “DHCP Server” , the router can assign IP address to PC
which connect with the router. You can use this setting to assign an IP
address to the LAN interface of this broadband router.
Here are descriptions of every setup items:
Item Name
Description
IP address
Please input the IP address of this broadband
router’s LAN interface.
Subnet Mask
Please input subnet mask for this network.
802.1d Spanning Tree If you wish to activate 802.1d spanning tree
function, select ‘Enabled’ for setup item
‘802.1d Spanning Tree’, or set it to ‘Disabled’.
DHCP Server
If you want to activate DHCP server function
of this router, select ‘Enabled’, or set it to
‘Disabled’.
Lease Time
Please select the lease time for every DHCP
leases here. You can select the time period from
the dropdown list, and the DHCP client will be
forced to obtain a new IP address from this
broadband router after this period of time.
You can select ‘Forever’ if you’re using this
broadband router with only few computers
(less than 30 computers)
Recommended Value if you don’t know what to fill:
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
802.1d Spanning Tree: Disabled
DHCP Server: Enabled
78
3-3-3 DHCP Server
You can use this setting to decide the range of IP address leases.
Here are descriptions of every setup items:
Item Name
Start IP
End IP
Domain Name
Description
Please input the start IP address of the IP
leases range.
Please input the end IP address of the IP leases
range.
If you wish, you can also input the domain
name for your network. This is optional.
Recommended Value if you don’t know what to fill:
Lease Time: Two Weeks (or ‘Forever’, if you have less than 20 computers)
Start IP: 192.168.2.2
End IP: 192.168.2.200
Domain Name: (leave it blank)
NOTE:
1. The number of the last field (mentioned ‘d’ field) of ‘End IP’ must be
greater than ‘Start IP’, and can not the same with router’s IP address.
2. The former three fields of IP address of ‘Start IP’, ‘End IP’, and ‘IP
Address of ‘LAN IP’ section (mentioned ‘a’, ‘b’, and ‘c’ field) should be
the same.
3. These settings will affect wireless clients, too.
79
3-3-4 Static DHCP Leases
If you wish to assign a fixed IP address to certain computers / devices by
DHCP, you can use this function to establish a MAC-to-IP address table
here, so you can assign a specific IP address to a specific computer /
network device by its MAC address.
Here are descriptions of every setup items:
Item Name
Enable Static
DHCP Leases
MAC Address
IP address
Add
Clear
Description
Check this box to enable this function,
otherwise uncheck it to disable this function.
Input the MAC address of the computer or
network device (total 12 characters, with
character from 0 to 9, and from a to f, like
‘001122aabbcc’).
Input the IP address you want to assign to
this computer or network device.
After you inputted MAC address and IP
address pair, click this button to add the pair
to static DHCP leases table.
Click this button to remove texts in MAC
address and IP address field.
80
All MAC-to-IP address entries will be listed in this page, and this
broadband router supports up 16 static DHCP leases:
To delete one or more entries listed here, please check the box of the
mapping entry (under ‘Select’), and click ‘Delete Selected’ button.
If you wish to delete all mapping entries, click ‘Delete All’ button. To
deselect all checked boxes, click ‘Reset’ button.
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
81
3-4 Wireless
You can setup Wireless LAN connection parameters of this broadband
router in ‘Wireless’ menu:
Please select one setting in this menu, then click ‘Apply’ to proceed. If
you wish to go back to previous page, click ‘Previous’.
82
3-4-1 Basic Settings
You can set basic settings of wireless LAN here.
Here are descriptions of ‘Band’ setup items:
BAND :
Please select the radio band you want to use from
‘Band’ dropdown menu , and the following message
will be displayed:
2.4 GHz (B)
2.4GHz band, only allows 802.11b wireless
network client to connect this router (maximum
transfer rate 11Mbps).
2.4 GHz (N)
2.4GHz band, only allows 802.11n wireless
network client to connect this router (maximum
transfer rate 150Mbps).
2.4 GHz (B+G)
2.4GHz band, only allows 802.11b and 802.11g
wireless network client to connect this router
(maximum transfer rate 11Mbps for 802.11b
clients, and maximum 54Mbps for 802.11g
clients).
2.4 GHz (G)
2.4GHz band, only allows 802.11g wireless
network client to connect this router (maximum
transfer rate 54Mbps).
83
2.4 GHz (B+G+N)
2.4GHz band, allows 802.11b, 802.11g, and
802.11n wireless network client to connect this
router (maximum transfer rate 11Mbps for
802.11b clients, maximum 54Mbps for 802.11g
clients, and maximum 150Mbps for 802.11n
clients).
SSID:
This is the name of wireless router. You can type any
alphanumerical characters here, maximum 32
characters. ESSID is used to identify your own
wireless router from others when there are other
wireless routers in the same area. Default SSID is
‘edimax’, it’s recommended to change default
ESSID name to the one which is meaningful to you,
like myhome, office_room1, etc.
Channel Number :
Please select a channel from the dropdown list of
‘Channel Number’, available channel numbers are
1 to 13 for European countries, 1 to 11 for USA. You
can choose any channel number you want to use,
and almost all wireless clients can locate the
channel you’re using automatically without any
problem. However, it’s still useful to remember the
channel number you use, some wireless client
supports manual channel number select, and this
would help in certain scenario when there is some
radio communication problem.
Associated Clients :
Click ‘Show Active Clients’ button, then an “Active
Wireless Client Table” will pop up. You can see the
status of all active wireless stations that are
connecting to the access point.
NOTE: If you don’t have special reason to limit the type of allowed
wireless client, it’s recommended to choose ‘2.4 GHz (B+G+N) to
maximize wireless client compatibility.
84
TIPS: You can try to change channel number to another one if you
think the data transfer rate is too slow. There could be some other
wireless routers using the same channel, which will disturb the radio
communication between wireless client and the wireless router.
After you finish the wireless setting, please click ‘Apply’ button, after
you click ‘Apply’, the following message will be displayed on your web
browser:
85
3-4-1 AP mode
In AP mode, the following settings will appear:
Here are descriptions of every setup items:
Item Name
Band
Description
Please select the radio band from one of
following options:
2.4 GHz (B): 2.4GHz band, only allows
802.11b wireless network client to connect this
router (maximum transfer rate 11Mbps).
2.4 GHz (N): 2.4GHz band, only allows
802.11n wireless network client to connect this
router (maximum transfer rate 150Mbps).
2.4 GHz (B+G): 2.4GHz band, only allows
802.11b and 802.11g wireless network client to
connect this router (maximum transfer rate
11Mbps for 802.11b clients, and maximum
54Mbps for 802.11g clients).
2.4 GHz (G): 2.4GHz band, only allows
802.11g wireless network client to connect this
router (maximum transfer rate 54Mbps).
2.4 GHz (B+G+N): 2.4GHz Band, Allows
802.11b, 802.11g, and 802.11N wireless clients.
It’s recommends to select this band to maximize
86
ESSID
Channel Number
Associated Clients
Advanced Settings
compatibility.
This is the name of broadband router. You can
type any alphanumerical characters here,
maximum 32 characters. ESSID is used to
identify your own broadband router from
others when there are other broadband routers
in the same area. Default SSID is ‘Edimax’, it’s
recommended to change default ESSID value
to the one which is meaningful to you, like
myhome, office_room1, etc.
Please select a channel from the dropdown list
of ‘Channel Number’, available channel
numbers are 1 to 13. You can choose any
channel number you want to use, and almost
all wireless clients can locate the channel
you’re using automatically without any
problem. However, it’s still useful to remember
the channel number you use, some wireless
client supports manual channel number select,
and this would help in certain scenario when
there is some radio communication problem.
Click ‘Show Active Clients’ button to show
the list of all connected wireless clients. You
can click ‘Refresh’ in new window to get
latest list again, or click ‘Close’ to close the
window.
Please note that if you have pop-up blocker
installed, you may have to disable it or tell
your pop-up blocker to allow the popup
window, or you will not be able to see the
wireless client list window.
When you click ”Advanced Settings”, you
will get a windows as follows. Please do not
change the default settings, if you do not
understand the meaning of the setting.
Where you can setup Channel Width in ”
87
Auto 20/40MHz ” to get good wireless
signal.
TIPS: You can try to change channel number to another one if you
think the data transfer rate is too slow, or keep having problem while
transferring the file over wireless network. There could be some other
broadband routers using the same channel, which will disturb the
radio communication between wireless client and the broadband
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
88
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
You can click ‘Continue’ to continue on other settings without restart the
broadband router, however, the changes you made will not take effect
before you restart the broadband router.
89
3-4-2 Security Settings
This wireless router supports two types of encryption: WEP (Wired
Equivalent Privacy) and WPA (Wi-Fi Protected Access):
Please select an encryption method from ‘Encryption’ dropdown menu,
and corresponding setting will appear:
Disabled
Encryption is disabled. It’s not recommended to disable encryption
because other people may use certain wireless scanner to copy the data
transferred over air.
90
WEP
Select WEP to enable WEP (Wired Equivalent Privacy) encryption:
Here are descriptions of every setup items:
Item Name
Key Length
Key Format
Default Tx Key
Encryption Key 1 to 4
Description
There are two types of WEP key length: 64-bit
and 128-bit. Using ‘128-bit’ is safer
than ’64-bit’, but will reduce some data
transfer performance.
There are two types of key format: ASCII and
Hex. When you select a key format, the number
of characters of key will be displayed. For
example, if you select ’64-bit’ as key length,
and ‘Hex’ as key format, you’ll see the message
at the right of ‘Key Format’ is ‘Hex (10
characters), which means the length of WEP
key is 10 characters.
You can set up to four sets of WEP key, and you
can decide which key is being used by default
here. If you don’t know which one you should
use, select ‘Key 1’.
Input WEP key characters here, the number of
91
characters must be the same as the number
displayed at ‘Key Format’ field. You can use
any alphanumerical characters (0-9, a-z, and
A-Z) if you select ‘ASCII’ key format, and if
you select ‘Hex’ as key format, you can use
characters 0-9, a-f, and A-F. You must enter at
least one encryption key here, and if you
entered multiple WEP keys, they should not be
same with each other.
Please click ‘Apply’ to save changes, or click ‘Reset’ to clear the texts in
all fields. If you click ‘Apply’, the following messages will appear:
You can click ‘Continue’ to back to previous page and continue setting, or
click ‘Apply’ to restart the broadband router so the changes will take
effect.
WPA pre-shared key
WPA (Wi-Fi Protected Access) is also an encryption method and is safer
than WEP. It’s recommended to use WPA instead of WEP when you need
to use encryption to protect your data security.
92
Here are descriptions of every setup items:
Item Name
WPA Unicast Cipher
Suite
Pre-shared Key
Format
Pre-shared Key
Description
Please select a type of WPA cipher suite.
Available options are: WPA (TKIP), WPA2
(AES), and WPA2 Mixed. You can select one of
them, but you have to make sure your wireless
client support the cipher you selected.
Select the type of pre-shared key, you
can select Passphrase (8 or more
alphanumerical characters, up to 63), or Hex
(64 characters of 0-9, and a-f).
Please input the WPA passphrase here.
It’s not recommended to use a word that can
be found in a dictionary due to security
reason.
Please click ‘Apply’ to save changes, or click ‘Reset’ to clear the texts in
all fields. If you click ‘Apply’, the following messages will appear:
You can click ‘Continue’ to back to previous page and continue setting, or
click ‘Apply’ to restart the broadband router so the changes will take
effect.
WPA RADIUS
If you have RADIUS authentication server on your local network, you
can authenticate the wireless clients by RADIUS server’s user database.
Only authenticated clients can establish wireless connection with this
broadband router.
93
Here are descriptions of every setup items:
Item Name
WPA Unicast Cipher
Suite
RADIUS Server IP
address
RADIUS Server Port
RADIUS Server
Password
Description
Please select a type of WPA cipher suite.
Available options are: WPA (TKIP), WPA2
(AES), and WPA2 Mixed. You can select one of
them, but you have to make sure your wireless
client support the cipher you selected.
Input the IP address of RADIUS authentication
server here.
Input the port number of RADIUS
authentication server here. Most of RADIUS
server will use port number 1812 and you can
keep using default value.
Input the password of RADIUS authentication
server here.
Please click ‘Apply’ to save changes, or click ‘Reset’ to clear the texts in
all fields. If you click ‘Apply’, the following messages will appear:
You can click ‘Continue’ to back to previous page and continue setting, or
click ‘Apply’ to restart the broadband router so the changes will take
effect.
94
3-4-3 MAC Address Filtering
This function will help you to prevent unauthorized users from
connecting to your wireless router; only those wireless devices who have
the MAC address you assigned here can gain access to your wireless
router. You can use this function with other security measures described
in previous section, to create a safer wireless environment. Up to 20
MAC addresses can be assigned.
To enable MAC address filtering, please check ‘Enable Wireless Access
Control’ box in this page, the descriptions of other setting items are listed
as follow:
Item Name
MAC address
Comment
Description
Input the MAC address you wish to add to the
MAC address to the table.
You can input any text here as the comment of
this MAC address, like ‘ROOM 2A Computer’
or anything. You can input up to 16
alphanumerical characters here. This is
optional and you can leave it blank, however,
it’s recommended to use this field to write a
comment for every MAC addresses as a
95
Add
Clear
memory aid.
Click ‘Add’ button to add the MAC address and
associated comment to the MAC address
filtering table.
Click ‘Clear’ to remove the value you inputted
in MAC address and comment field.
All MAC address entries will be listed in this page:
To delete one or more entries listed here, please check the box of the
mapping entry (under ‘Select’), and click ‘Delete Selected’ button.
If you wish to delete all mapping entries, click ‘Delete All’ button. To
deselect all checked boxes, click ‘Reset’ button.
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
96
3-4-4 WPS
WPS (Wi-Fi Protected Setup) provides a convenient way to establish the
connection between this broadband router and wireless clients. Any
WPS-compatible wireless clients can establish secure connection with
this broadband router with simple push-button type configuration or
PinCode type configuration.
Here are descriptions of every setup items:
Item Name
Enable WPS
WPS Status
Self PIN code
SSID
Authentication Mode
Description
Check this box to enable WPS function,
uncheck it to disable WPS.
If the wireless security (encryption) function of
this wireless router is properly set, you’ll see
‘Configured’ message here. If wireless security
function has not been set, you’ll see
‘unConfigured’.
This is the WPS PIN code of this wireless
router. This code is useful when you need to
build wireless connection by WPS with other
WPS-enabled wireless devices.
The SSID of this wireless router will be
displayed here.
The wireless security authentication mode of
97
Passphrase Key
Config Mode
this wireless router will be displayed here.
The WPA passphrase will be displayed as
asterisk here.
Select the WPS configuration role of this
broadband router.
Registrar: This broadband router will act as
WPS registrar and wait for wireless clients to
send WPS configuration request.
Configure via Push
Button
Configure via Client
PinCode
Enrollee: This broadband router will act as
WPS enrollee and send WPS configuration
request to other WPS registrar.
Click ‘Start PBC’ to start Push-Button type
WPS configuration (PBC). Please push the
WPS push-button on other WPS-compatible
network devices to begin WPS configuration.
You can also push the ‘WPS / Reset’ button
located at the back of this broadband router to
start PBC without using web configuration
interface.
Please input the PinCode displayed at the
configuration software of WPS-enabled
wireless client, and click ‘Start PIN’ to
establish connection with the wireless client.
98
3-4-5 Wireless Schedule
By wireless schedule, you can restrict wireless clients (computers) from
accessing improper website. Because you can setup time and you can
enable/disable router’s wireless signal to control schedule of Internet
access .
Item Name
Enable Schedule
settings
Weekday
Time
Command
Description
Check this box to enable Schedule function,
uncheck it to disable Wireless Schedule .
Where you can select a day or several days.
Enter a start time for the schedule.
Wireless on or Wireless off (Enable or Disable
wireless signal for the schedule)
Note : The function is not workable, if you disable wireless hardware
button ( back panel ).
Click “ Add ”, the list of schedules will be listed here.
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
99
3-5 Advance Settings*
This router provides various network functionalities like QoS and NAT,
and you can configure these functions in ‘Advanced Settings’ menu.
Please select the function you wish to set, then click ‘Apply’ button. If
you wish to go back to previous page, click ‘Previous’ button.
100
3-5-1 QoS
Quality of service provides an efficient way for computers on the network
to share the internet bandwidth with a promised quality of internet service.
Without QoS, all computers and devices on the network will compete
with each other to get internet bandwidth, and some applications which
require guaranteed bandwidth (like video streaming and network
telephone) will be affected, therefore an unpleasing result will occur, like
the interruption of video / audio transfer.
With this function, you can limit the maximum bandwidth or give a
guaranteed bandwidth for a specific computer, to avoid said unpleasing
result from happening.
3-5-1-1 Basic QoS Settings
Here are descriptions of every setup items:
Item Name
Enable QoS
Total Download
Bandwidth
Total Upload
Bandwidth
Add
Description
Check this box to enable QoS function,
uncheck it to disable QoS.
You can set the limit of total download
bandwidth in kbits. To disable download
bandwidth limitation, input ‘0’ here.
You can set the limit of total upload bandwidth
in kbits. To disable upload bandwidth
limitation, input ‘0’ here.
Click ‘add’ button to add a new QoS rule
(detailed instructions will be given below).
101
Edit
Delete Selected
Delete All
Move Up
Move Down
Reset
If you want to modify the content of a specific
rule, please check the ‘select’ box of the rule
you want to edit, then click ‘Edit’ button. Only
one rule should be selected a time! If you
didn’t select a rule before clicking ‘Edit’
button, you’ll be prompted to add a new rule.
You can delete selected rules by clicking this
button. You can select one or more rules to
delete by check the ‘select’ the box of the
rule(s) you want to delete a time. If the QoS
table is empty, this button will be grayed out
and can not be clicked.
By clicking this button, you can delete all rules
currently listed in the QoS table. If the QoS
table is empty, this button will be grayed out
and can not be clicked.
Move selected item up.
Move selected item down.
If you want to erase all values you just entered.
Click ‘Reset’
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
102
3-5-1-2 Add a new QoS entry
After you click ‘Add’ button in QoS menu, a new setting page will
appear:
Here are descriptions of every setup items:
Item Name
Rule Name
Bandwidth
Local IP Address
Local Port Range
Description
Please give a name to this QoS rule (up to 15
alphanumerical characters).
Set the bandwidth limitation of this QoS rule.
You have to select the data direction of this rule
(Upload of Download), and the speed of
bandwidth limitation in Kbps, then select the
type of QoS: ‘guarantee’ (guaranteed usable
bandwidth for this rule) or ‘max’ (set the
maximum bandwidth for the application
allowed by this rule).
Specify the local (source) IP address that will
be affected by this rule. Please input the
starting IP address in the left field, and input
the end IP address in the right field to define a
range of IP addresses, or just input the IP
address in the left field to define a single IP
address.
Please input the range of local (source) port
103
Remote IP Address
Remote Port Range
Traffic Type
Protocol
number that will be affected by this rule. If you
want to apply this rule on port 80 to 90, please
input ’80-90’; if you want to apply this rule on
a single port, just input the port number, like
‘80’
Specify the remote (destination) IP address that
will be affected by this rule. Please input the
starting IP address in the left field, and input
the end IP address in the right field to define a
range of IP addresses, or just input the IP
address in the left field to define a single IP
address.
Please input the range of remote (destination)
port number that will be affected by this rule. If
you want to apply this rule on port 80 to 90,
please input ’80-90’; if you want to apply this
rule on a single port, just input the port
number, like ‘80’. If the remote (destination) IP
address and /or port number is universal, just
leave it blank.
Please select the traffic type of this rule,
available options are None, SMTP, HTTP,
POP3, and FTP. You can select a specific
traffic type for this rule, if you want to make
this rule as a IP address based rule (apply the
limitation on all traffics from / to the specified
IP address / port number), select ‘None’.
Please select the protocol type of this rule,
available options are TCP and UDP. If you
don’t know what protocol your application
uses, please try ‘TCP’ first, and switch to
‘UDP’ if this rule doesn’t seems to work.
Please click ‘save’ button to save settings, and the rule you just set will
appear in current QoS table; if you did anything wrong, you’ll get an
error message when you click ‘Save’ button, please correct your input by
the instructions given by the error message. If you want to erase all values
you just entered, click ‘Reset’.
104
3-5-2 NAT
Network address translations solve the problem if sharing a single IP
address to multiple computers. Without NAT, all computers must be
assigned with a valid Internet IP address to get connected to Internet, but
Internet service providers only provide very few IP addresses to every
user. Therefore it’s necessary to use NAT technology to share a single
Internet IP address to multiple computers on local network, so everyone
can get connected to Internet.
This broadband router supports four types of NAT functions, and the
instructions of these functions will be given below.
105
3-5-2-1 Virtual Server
This function allows you to redirect a port on Internet IP address (on
WAN port) to a specified port of an IP address on local network, so you
can setup an Internet service on the computer on local network, without
exposing it on Internet directly. You can also build many sets of port
redirection, to provide many different Internet services on different local
computers via a single Internet IP address.
Here are descriptions of every setup items:
Item Name
Enable Virtual Server
Private IP
Computer name
Private Port
Type
Public Port
Description
Check this box to enable virtual server, and
uncheck this box to disable virtual server.
Input the IP address of the computer which
provides Internet service.
All computer names found by this broadband
router on local network will be listed here. You
can select the computer name and click ‘<<’
button to add selected computer’s IP address to
‘Private IP’ field.
Please note that this list may not be able to list
all computers on your local network.
Input the port number of the IP address which
provides Internet service.
Select the type of connection, TCP or UDP. If
you’re not sure, please select ‘Both’
Please select the port number of Internet IP
106
Comment
Add
Reset
address which will be redirected to the port
number of local IP address defined above.
Please input any text to describe this mapping,
up to 16 alphanumerical characters.
Add the mapping to virtual server table.
Remove all inputted values.
All existing virtual server mappings will be displayed in this page. To
delete one or more mappings, check the box of the mapping, then click
‘Delete Selected’ button to remove the mapping. To delete all existing
mappings, click ‘Delete All’ button. If you want to uncheck all boxes,
click ‘Reset’.
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
107
3-5-2-2 Special Applications
Some applications require more than one connection a time; these
applications won’t work with simple NAT rules. In order to make these
applications work, you can use this function to let these applications
work.
Here are descriptions of every setup items:
Item Name
Enable
IP Address
Computer name
TCP Port to Open
Description
Check this box to enable support for special
applications, and uncheck this box to disable
this support.
Input the IP address of the computer which is
going to use the special application.
All computer names found by this broadband
router on local network will be listed here. You
can select the computer name and click ‘<<’
button to add selected computer’s IP address to
‘IP Address’ field.
Please note that this list may not be able to list
all computers on your local network.
Input the TCP port number required by the
special application, the port number can be a
108
UDP Port to Open)
Comment
Select Game
Add
Reset
single value, or a range (like 20-50). If you
need to input more than one port number and
they’re not contiguous, list all port numbers
here and separate them by comma ( , ). If the
application does not use TCP port, leave it
blank.
Input the UDP port number required by the
special application, the port number can be a
single value, or a range (like 20-50). If you
need to input more than one port number and
they’re not contiguous, list all port numbers
here and separate them by comma ( , ). If the
application does not use UDP port, leave it
blank.
You can input any text here to help you
remember the purpose of this item. This is
optional.
This router comes with a numerous port
mapping settings of network games. If the
game you wish to set is listed here, you can
select it from dropdown menu.
After a game is selected, click ‘Add’ (the one
next to ‘Select Game’ dropdown list) to add the
connection parameters to all respective fields.
Click this button to add a new port mapping
rule to special applications table.
Click this button to remove all values in every
field.
All existing special application mappings will be displayed in this page.
To delete one or more mappings, check the box of the mapping, then
click ‘Delete Selected’ button to remove the mapping. To delete all
existing mappings, click ‘Delete All’ button. If you want to uncheck all
boxes, click ‘Reset’.
109
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
110
3-5-2-3 UPnP Settings
Parameters
UPnP Feature
Default
Description
Disable
You can Enable or Disable UPnP feature
here. After you enable the UPnP feature,
all client systems that support UPnP, like
Windows XP, can discover this router
automatically and access the Internet
through this router without any
configuration. The NAT Traversal
function provided by UPnP can let
applications which support UPnP
smoothly connect to Internet websites
and avoid any incompatibility problem
due to the NAPT port translation.
Click <Apply> at the bottom of the screen to save the configurations.
You can now configure other advance sections or start using the router.
111
3-5-2-4 ALG Settings
You can select applications that require “Application Layer Gateway” support.
Parameters
Enable
Default
Description
You can enable “Application Layer
Gateway” function, and the router will
let selected application correctly pass
though the NAT gateway.
Click <Apply> at the bottom of the screen to save the configurations.
You can now configure other advance sections or start using the router.
112
3-5-2-5 Static Routing
This router provides static routing function, and the static routing can work with
NAT (IP Sharing) function. With static routing, the router can forward packets
according to your routing rules.
Parameters
Description
Static routing function is disabled by default. You have
Enable Static
to enable the static routing function, to make your
Routing
routing rules take effect.
Destination The network address of destination LAN.
LAN IP
Subnet Mask The subnet mask of destination LAN.
Default
Gateway
Hop Count
Interface
The next stop gateway of the path toward the destination
LAN. This is the IP of the neighbor router that this router
should communicate with on the path to the destination
LAN.
The number of hops (routers) to pass through to reach
the destination LAN.
The interface that go to the next hop (router).
Fill in the "Destination LAN IP", "Subnet Mask”,
“Default Gateway”, "Hop Count" and "Interface" of the
rule to be added and click "Add". Then this static routing
Add a Rule rule will be added to the "Static Routing Table" listed
below. If you found any typo before adding it and want
to correct it, just click "Reset" and the fields will be
cleared.
113
Remove a
Rule
If you want to remove some routing rules from the
"Static Routing Table", select the rules you want to
remove in the table and click "Delete Selected". If you
want remove all rules from the table, just click "Delete
All" button. Click "Reset" will clear your current
selections.
Click <Apply> at the bottom of the screen to save the configurations.
You can now configure other advance sections or start using the router.
114
3-5-3 Firewall
This broadband router supports several firewall functions which will help
you to protect your network and computer. In this chapter, instructions for
using these functions will be given, so you can utilize these functions to
protect your network from hackers and malicious intruders.
3-5-3-1 Access Control
By using access control, you can restrict your computers from accessing
improper website, or using disallowed applications. You can even only
allow computers with certain MAC address to access the network, or
deny the computers in the list from accessing your network.
Here are descriptions of every setup items:
Item Name
Enable MAC Filtering
Description
Check this box to enable MAC address based
filtering, and please select ‘Deny’ or ‘Allow’ to
decide the behavior of MAC filtering table. If
you select deny, all MAC addresses listed in
filtering table will be denied from connecting
to the network; if you select allow, only MAC
addresses listed in filtering table will be able to
connect to the network, and rejecting all other
115
Client PC MAC
address
Computer Name
Comment
Add
Reset
network devices.
Please input the MAC address of computer or
network device here, dash ( - ) or colon ( : ) are
not required. (i.e. If the MAC address label of
your wireless device indicates
‘aa-bb-cc-dd-ee-ff’ or ‘aa:bb:cc:dd:ee:ff’, just
input ‘aabbccddeeff’
All computer names found by this broadband
router on local network will be listed here. You
can select the computer name and click ‘<<’
button to add selected computer’s IP address to
‘Private IP’ field.
Please note that this list may not be able to list
all computers on your local network.
You can input any text here as the comment of
this MAC address, like ‘ROOM 2A Computer’
or anything. You can input up to 16
alphanumerical characters here. This is
optional and you can leave it blank, however,
it’s recommended to use this field to write a
comment for every MAC addresses as a
memory aid.
Click ‘Add’ button to add the MAC address and
associated comment to the MAC address
filtering table.
Remove all inputted values.
All MAC address entries will be listed in this page:
116
To delete one or more entries listed here, please check the box of the
mapping entry (under ‘Select’), and click ‘Delete Selected’ button.
If you wish to delete all mapping entries, click ‘Delete All’ button. To
deselect all checked boxes, click ‘Reset’ button.
If you wish to use IP address-based filtering, please use ‘IP Filtering
Table’ in this page:
Please check ‘Enable IP Filtering Table’ box first, and select ‘Deny’ or
‘Allow’ to decide the behavior of IP filtering table (Deny the access of IP
addresses in the list, or allow the access of IP addressees in the list). You
have to click ‘Add PC’ button to add a new IP address to the list:
Here are descriptions of every setup items:
Item Name
Client PC Description
Client PC IP address
Description
Please input any text to describe this IP
address, up to 16 alphanumerical characters.
Please input the starting IP address in the left
field, and input the end IP address in the right
field to define a range of IP addresses, or just
input the IP address in the left field to define a
single IP address.
117
You also have to select the type of Internet services that will be applied to
this access control rule from the list:
You can select multiple services here. If you wish to deny or allow all
services of certain IP address(es), please select both ‘TCP’ and ‘UDP’.
If the service you wish to deny or allow is not listed, you can use ‘User
Define Service’ table to add a new service of your own:
118
Here are descriptions of every setup items:
Item Name
Protocol
Port Range
Description
Please select the protocol type of this service:
TCP or UDP, or ‘Both’.
Please input the port range if this service. For
a single port number, just input the number of
service port (like ‘110’).
If this service consists multiple continuous
ports, you can input ‘110-120’ for port number
110 to 120, or ’110,115,120’ for port number
110, 115, and 120.
Click ‘Add’ to add this IP address restriction rule to the list (and back to
previous page), or click ‘Reset’ to clear all texts in every field.
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
119
3-5-3-2 URL Blocking
If you want to prevent computers in local network from accessing certain
website (like pornography, violence, or anything you want to block), you
can use this function to stop computers in local network from accessing
the site you defined here.
This function is useful for parents and company managers.
Please follow the following instructions to set URL blocking parameters:
Please click ‘Firewall’ menu on the left of web management interface,
then click ‘URL Blocking’, and the following message will be displayed
on your web browser:
Here are descriptions of every setup items:
Item Name
Enable URL Blocking
URL/Keyword
Description
Check this box to enforce URL Blocking,
uncheck it to disable URL Blocking.
Input the URL (host name or IP address of
website, like http://www.blocked-site.com or
http://11.22.33.44), or the keyword which is
120
Add
Reset
contained in URL (like pornography, cartoon,
stock, or anything).
Click ‘Add’ button to add the URL / keyword to
the URL / Keyword filtering table.
Click ‘Reset’ to remove the value you inputted
in URL/Keyword field.
All existing URLs will be displayed in ‘Current URL Blocking Table’:
If you want to delete a specific URL/Keyword entry, check the ‘select’
box of the MAC address you want to delete, then click ‘Delete Selected’
button. (You can select more than one MAC addresses). If you want to
delete all URL/Keyword listed here, please click ‘Delete All’ button, or
you can also click ‘Reset’ button to unselect all URL/Keywords.
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
121
3-5-3-3 DoS
Denial of Service (DoS) is a common attack measure, by transmitting a
great amount of data or request to your Internet IP address and server, the
Internet connection will become very slow, and server may stop
responding because it is not capable to handle too much traffics.
This router has a built-in DoS attack prevention mechanism; when you
activate it, the router will stop the DoS attack for you:
Here lists four kinds of DoS attacks, please select the type of DoS attack
you wish this broadband router to protect, and you can select multiple
types of attacks.
The descriptions of every DoS attack is listed below:
Item Name
Ping of Death
Discard Ping From
WAN
Description
Ping of Death is a special packet, and it will
cause certain computer to stop responding.
Check this box and the router will filter this
kind of packet out.
Ping is a common and useful tool to know
the connection status of a specified remote
network device, but some malicious intruder
will try to fill your network bandwidth with a
lot of PING request data packet, to make your
internet connection become very slow, even
unusable. Check this box and the router will
ignore all inbound PING request, but when you
activate this function, you will not be able to
122
Port Scan
Sync Flood
ping your own router from internet, too.
Some malicious intruder will try to use a ‘port
scanner’ to know how many ports of your
Internet IP address are open, and they can
collect a lot of valuable information by doing
so. Check this box and the router will block all
traffics which are trying to scan your Internet
IP address.
This is another kind of attack, which uses a lot
of fake connection request to consume the
memory of your server, and try to make your
server become unusable. Check this box and
the router will filter this kind of traffic out.
If you need to specify the details of every DoS attack, please click
‘Advanced Settings’ button, and the following settings will appear:
The descriptions of every DoS attack is listed below:
Item Name
Ping of Death
Description
Set the threshold of when this DoS prevention
mechanism will be activated. Please check the
123
Discard Ping From
WAN
Port Scan
Sync Flood
box of Ping of Death, and input the frequency
of threshold (how many packets per second,
minute, or hour), you can also input the ‘Burst’
value, which means when this number of ‘Ping
of Death’ packet is received in very short time,
this DoS prevention mechanism will be
activated.
Check the box to activate this DoS prevention
mechanism.
Many kind of port scan methods are listed here,
please check one or more DoS attack methods
you want to prevent.
Like Ping of Death, you can set the threshold
of when this DoS prevention mechanism will be
activated.
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
124
3-5-4 DDNS
DDNS (Dynamic DNS) is a IP-to-Hostname mapping service for those
Internet users who don’t have a static (fixed) IP address. It will be a
problem when such user wants to provide services to other users on
Internet, because their IP address will vary every time when connected to
Internet, and other user will not be able to know the IP address they’re
using at a certain time.
This router supports DDNS service of following service providers:
3322 (http://www.3322.org/)
DHS (http://www.dhs.org)
DynDNS (http://www.dyndns.org/)
ODS (http://ods.org)
TZO (http://www.tzo.com/)
GnuDIP (http://gnudip2.sourceforge.net/)
DyNS (http://www.dyns.cx/)
ZoneEdit (http://www.zoneedit.com)
DHIS (http://www.dhis.org/)
CyberGate (http://cybergate.planex.co.jp/ddns/)
NS2GO (http://ns.ns2go.com/)
Please go to one of DDNS service provider’s webpage listed above, and
get a free DDNS account by the instructions given on their webpage.
After that, you can use the DDNS page to setup DDNS parameters to use
DDNS service:
125
Here are descriptions of every setup items:
Item Name
Dynamic DNS
Provider
Domain Name
Account / E-Mail
Password / Key
Description
If you want to enable DDNS function, please
select ‘Enabled’; otherwise please select
‘Disabled’
Select your DDNS service provider here.
Input the domain name you’ve obtained from
DDNS service provider.
Input account or email of DDNS registration.
Input DDNS service password or key.
If your DDNS provider is ‘DHIS’, the settings will be different:
Here are descriptions of every setup items:
Item Name
HostID
ISAddr
Authentication Type
HostPass
Description
Please input the HostID you applied during
DHIS registration.
Please input the ISAddr you applied during
DHIS registration.
Please select the DHIS user authentication type
from dropdown menu: password or QRC.
Please input the HostID you applied during
DHIS registration.
(This field will appear only when
126
AuthP / AuthQ
authentication type is password).
Please input the AuthP/AuthQ you applied
during DHIS registration.
(This field will appear only when
authentication type is QRC).
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
127
3-5-5 Port Forwarding
This function allows you to redirect a single port or consecutive ports of
Internet IP address to the same port of the IP address on local network.
The port number(s) of Internet IP address and private IP address (the IP
address on local network) must be the same.
If the port number of Internet IP address and private IP address is
different, please use ‘Virtual Server’ function.
The port forwarding setting page looks like this:
Here are descriptions of every setup items:
Item Name
Enable Port
Forwarding
Private IP
Computer name
Description
Check this box to enable port forwarding, and
uncheck this box to disable port forwarding.
Input the IP address of the computer on local
network which provides internet service.
All computer names found by this broadband
router on local network will be listed here. You
can select the computer name and click ‘<<’
button to add selected computer’s IP address to
‘Private IP’ field.
Please note that this list may not be able to list
all computers on your local network.
128
Type
Port Range
Comment
Add
Reset
Select the type of connection, TCP or UDP. If
you’re not sure, please select ‘Both’.
Input the starting port number in the left field,
and input the ending port number in the right
field. If you only want to redirect a single port
number, just fill the port number in the left
field.
Please input any text to describe this mapping,
up to 16 alphanumerical characters.
Add the mapping to port forwarding table.
Remove all inputted values.
All existing URLs will be displayed in ‘Current URL Blocking Table’:
If you want to delete a specific port forwarding entry, check the ‘select’
box of the port forwarding entry you want to delete, then click ‘Delete
Selected’ button. (You can select more than one port forwarding entries).
If you want to delete all port forwarding entries listed here, please click
‘Delete All’ button or you can also click ‘Reset’ button to unselect all port
forwarding entries.
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
129
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
130
3-5-6 DMZ
Demilitarized Zone (DMZ) is a special area in your local network. This
area resides in local network, and all computers in this area uses private
IP address, too. But these private IP addresses are mapped to a certain
Internet IP address, so other people on Internet can fully access those
computers in DMZ.
The DMZ setting page looks like this:
Here are descriptions of every setup items:
Item Name
Enable DMZ
Public IP address
Client PC IP address
Computer Name
Description
Check this box to enable DMZ function,
uncheck this box to disable DMZ function.
You can select ‘Dynamic IP’ or ‘Static IP’ here.
If you select ‘Dynamic IP’, you have to select
an Internet connection session from dropdown
menu; if you select ‘Static IP’, please input the
IP address that you want to map to a specific
private IP address.
Please input the private IP address that the
Internet IP address will be mapped to.
Select the name of computer.
131
Add
Reset
Add the mapping to port forwarding table.
Remove all inputted values.
NOTE: Please note that every public IP address can be mapped to a single
Client PC IP address only.
All existing DMZ entries will be displayed in ‘Current DMZ Table’:
If you want to delete a specific DMZ entry, check the ‘select’ box of the
DMZ entry you want to delete, then click ‘Delete Selected’ button. (You
can select more than one DMZ entries). If you want to delete all DMZ
entries listed here, please click ‘Delete All’ button or you can also click
‘Reset’ button to unselect all DMZ entries.
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
132
3-5-7 Fail Over
3G-6200nL supports automatic backup function. If you have enabled
Ethernet WAN function (Switch LAN to WAN) in page . When
connecting with xDSL/Cable modem, 3G-6200nL will enable the
xDSL/Cable broadband connection automatically when 3G/3.5G Internet
connection is not available.
You can surf Internet anywhere and anytime via Edimax 3G-6200nL.
Item Name
WAN Fail-Over
WAN Priority
Ping Target IP
Email Notification
SMTP Server
Description
Enable or Disable (Please make sure you have
enabled WAN function in chapter 3-2)
You can setup priority of wireless 3G and
xDSL/Cable modem.
The router will check Internet connection via
this public IP address.
Enable / Disable
It’s for you to send a message to inform you the
fail-over function has been enabled.
Please input SMTP server IP address.
133
Click <Apply> at the bottom of the screen to save the configurations.
You can now configure other advance sections or start using the router.
134
Chapter IV : Status
In this menu, you can check the operation status of this broadband router.
To view the status, follow the following instructions:
1. Click ‘Status’ button from main menu:
2. The basic system information will be shown:
You can check the system uptime and firmware version of this broadband
router. If you need detailed information about Internet connection or
system usage log, please choose one of them and click ‘Apply’. If you
want to go back to previous page, please click ‘Previous’.
135
136
5-1 Internet Connection
This page shows the current status of Internet connection.
137
5-2 Device Status
This page shows current wireless LAN and wired LAN configuration.
138
5-3 System Log
This page shows all logged system information. You can use scroll bar to
view the logs, or click ‘Save’ to download the log file to your computer.
You can also click ‘Clear’ to remove all logs, or click ‘Refresh’ to reload
logs.
139
5-4 Security Log
This page shows all logged security-related information. You can use
scroll bar to view the logs, or click ‘Save’ to download the log file to your
computer. You can also click ‘Clear’ to remove all logs, or click ‘Refresh’
to reload logs.
140
5-5 Active DHCP Client
This page shows all current DHCP clients. You can click ‘Refresh’ to
reload the list.
141
5-6 Statistics
This page shows the statistical information of network interfaces of this
broadband router, and the total system uptime.
142
5-7 Modem Information
This page shows the modem information of you have connected with 3G
modem card or xDSL modem.
143
Chapter V : Tools
This broadband router comes with several tools that will help you to
manage the configuration of broadband router, upgrade the firmware, and
restart the broadband router.
To use these tools, follow the following instructions:
1. Click ‘Tools’ button from main menu:
144
2. The list of tools will appear:
Please select the tool you wish to use, then click ‘Apply’ button. If you
wish to go back to previous page, click ‘Previous’ button.
145
6-1 Configuration Tools
In this page, you can backup and restore current system configuration,
and reset all settings to factory default value.
Here are descriptions of every setup items:
Item Name
Backup Settings
Restore Settings
Restore to Factory
Default
Description
Click ‘Save…’ button to download the current
configuration as ‘config.bin’ file. Save this file
on your computer to keep current
configuration. If you want to keep more than
one version of configuration file, please
rename the configuration file to another name.
Click ‘Browse...’ button to select a
previously-saved configuration file from your
computer, then click ‘Upload’ to upload the
configuration file to broadband router, and the
configuration of broadband router will be
replaced by the content of uploaded
configuration file.
Click ‘Reset’ button to restore the settings of
the broadband router to factory default value.
A pop-up message window will appear and ask
you to confirm the reset.
146
6-2 Firmware Upgrade
New firmware releases will provide new functions to this broadband
router, and you can use firmware upgrade function to upgrade the
firmware to new version.
NOTE: It’s recommended to use wired Ethernet connection to upload the
firmware file, please refrain from using wireless connection to upload the
firmware file. Also, please do not switch the broadband router or computer
you used to upload the firmware file off during firmware upgrade. This will
cause broadband router become malfunction and unusable.
Please download the firmware file from our company’s website and save
it on your computer, and use firmware upgrade function to upgrade
firmware:
Please click ‘Browse…’ button to select the firmware file saved on your
computer, then click ‘Apply’ button to start firmware upload. The
broadband router will restart after file upload is successful, and all
settings will be lost. Please use default IP address (192.168.2.1) to
connect to the broadband router and set every settings again.
147
6-3 Restart
If you found that the broadband router is not functioning correctly, or
responding slowly then usual, you can use this function to restart the
broadband router, and this may correct the problem.
Click ‘Apply’ button to restart the broadband router. You’ll be prompted
to confirm the restart, click ‘OK’ to restart the broadband router.
148
Chapter VI : Language
This 3G router’s web-based user interface supports 14-languages . You
can change the display language by click ‘Language’ button in main
menu.
To change the display language, follow the following instructions:
1. Click ‘Language’ button from main menu:
149
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment must be installed and operated in accordance with provided
instructions and a minimum 20 cm spacing must be provided between computer
mounted antenna and person’s body (excluding extremities of hands, wrist and feet)
during wireless modes of operation.
The equipment version marketed in US is restricted to usage of the channels 1-11
only.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE
EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio
equipment and telecommunication terminal Equipment and the mutual recognition of
their conformity (R&TTE)
The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As
of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install
and use it. However, special attention must be paid to the dangers of electric shock
and static electricity when working with electrical equipment. All guidelines of this and
of the computer manufacture must therefore be allowed at all times to ensure the safe
use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria,
Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg,
Bulgaria, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Poland,
Romania, Slovakia, Slovenia, the Netherlands, Portugal, Spain, Sweden, and the
United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states:
Iceland, Liechtenstein, Norway, and Switzerland.
EU Countries not intended for use
None
150
A declaration of conformity is available on www.edimax.com
N20379
151
152
Edimax 3G-6200nL
Описание
ф мл ни
дит
нл н з 2 мин ты
Д т в
в
м
з
нии
Характеристики
з в
ии
Д т в
и
гл
л жб
т чн я
дд ж и
л т
вин и
л т з з любым
д бным
б м
тзывы
ции и
ид и
Download PDF