A-946 Invisible Non

A-946 Invisible Non
MATERIAL SAFETY DATA SHEET
Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS, European Union CLP EC 1272/2008, and the Global Harmonization Standard
1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
CHEMICAL NAME; CLASS: BLAK-RAY® A-946 INVISIBLE NON-POROUS INK
UVP PRODUCT CODE: 96-0057-04
SYNONYMS: None/Mixture
CHEMICAL FAMILY NAME: Solvent-Based Ink
PRODUCT USE:
U.S. MANUFACTURER/DISTRIBUTOR:
ADDRESS:
BUSINESS PHONE:
FAX PHONE:
GENERAL E-Mail:
EUROPEAN SALES OPERATIONS:
ADDRESS:
BUSINESS PHONE:
FAX PHONE:
E-Mail:
EMERGENCY PHONE:
Industrial Fluorescent Coding On Non-Porous Materials
UVP, LLC
2066 W. 11th Street, Upland, CA 91786 USA
Toll Free Phone in US/Canada: (800) 452-6788 (8 am to 5 pm PST) or
(909) 946-3197
(909) 946-3597
[email protected]
Ultra-Violet Products Ltd
Unit 1, Trinity Hall Farm Estate, Nuffield Road, Cambridge CB4 1TG UK
+44(0)1223-420022
+44(0)1223-420561
[email protected]
Infotrac: U.S./Canada/Puerto Rico/U.S. Virgin Islands: 1-800-457-4280 (24 hrs)
(International) +1-708-918-1900 (collect-24 hrs)
2. HAZARD IDENTIFICATION
GLOBAL HARMONIZATION AND EU CLP REGULATION (EC) 1272/2208 LABELING AND CLASSIFICATION: This product has
been classified per GHS Standards under European regulations. For information on EU classification under (67/548/EEC), see
below.
Classification: Flammable Liquid Cat. 3, Acute Inhalation Toxicity Cat. 4, Acute Dermal Toxicity Cat. 4, Acute Oral Toxicity Cat. 4, Eye
Irritant Cat. 2, Skin Irritant Cat. 2, STOT (Central Nervous System, Blood) SE (via Inhalation) Cat. 3
Hazard Statement Codes: H226, H332, H312, H302, H319, H315, H336
Precautionary Codes: P210, P233, P240, P241, P242, P243, P261, P264, P270, P271, P280, P303 + P361 + P353, P370 +
P378, P304 + P340, P302 + P352, P301 + P312, P330, P305 + P351 + P338, P337 + P313, P332 + P313, P321, P403 + P235,
P403 + P333, P405, P501
Signal Word: Warning
Hazard Symbol/Pictograms: GHS02, GHS07
EU LABELING AND CLASSIFICATION: This product has been classified as per European Union Council Directive 67/548/EEC or
subsequent Directives.
Classification: Highly Flammable, Harmful, Irritant
Risk Phrases: R11, R20/21/22, R36, R66, R67
Safety Phrases: S2, S3/7/9, S16, S23, S24/25, S26, S36/37, S46
Hazard Symbols: F, Xn/Xi
See Section 16 for Full Text of all Hazard and Precautionary Statement Codes and Risk and Safety Phrases
EMERGENCY OVERVIEW: Product Description: This product is a clear, colorless liquid with an aromatic odor.
Under exposure to UV light, this product fluoresces blue. Health Hazards: Ingestion and inhalation may be harmful
or fatal. May cause respiratory system, eye, and skin irritation; eye irritation may be severe. Ingestion and inhalation
may cause adverse central nervous system and blood effects. Repeated skin contact may cause dermatitis. Contains
materials that can be absorbed via intact skin and may cause adverse effect by this route of exposure. Contains
materials that are suspect carcinogens. Flammability Hazards: This product is flammable and may be ignited if
exposed to temperature above 28.3°C (83°F). When involved in a fire, this product may decompose and produce
irritating fumes and toxic gases (e.g., carbon monoxide, carbon dioxide, nitrogen oxides, acetic acid, n-butanol,
peroxides). Reactivity Hazards: This product is not reactive.
82-0290-01 REV. A
EFFECTIVE DATE: JUNE 13, 2011
PAGE 1 OF 15
2. HAZARD IDENTIFICATION (Continued)
EMERGENCY OVERVIEW (continued): Environmental Hazards: This product may cause harm to the environment
if a large quantity is accidentally released to an aquatic environment. Emergency Response Procedures: Emergency
responders must wear the proper personal protective equipment (and have appropriate fire-suppression equipment)
suitable for the situation to which they are responding.
3. COMPOSITION and INFORMATION ON INGREDIENTS
Chemical Name
Isopropyl Alcohol
Glycol Ether
CAS #
67-63-0
Proprietary
EINECS or ELNICS #
200-661-7
Proprietary
WT%
EU Classification (67/548/EEC)
GHS & EU Classification (1272/2008)
Risk Phrases/Hazard Statements
30-60%
EU 67/548 Hazard Classification: Highly Flammable, Irritant
EU 67/548 Risk Phrase Codes: R11, R36, R67
EU 67/548 Hazard Symbols: F, Xi
GHS & EU 1272/2008 Classification: Flammable Liquid Cat. 2, Eye Irritant
Cat. 2, STOT Inhalation SE Cat. 3
GHS & EU 1272/2008 Hazard Codes: H225, H319, H336
GHS & EU 1272/2008 Hazard Symbols/Pictograms: GHS02, GHS07
15-40%
EU 67/548 Hazard Classification: Harmful, Irritant
EU 67/548 Risk Phrase Codes: R20/21/22
EU 67/548 Hazard Symbols: Xn
GHS & EU 1272/2008 Classification: Acute Inhalation Toxicity Cat. 4, Acute
Dermal Toxicity Cat. 4, Acute Oral Toxicity Cat. 4, Eye Irritant Cat. 2, Skin
Irritant Cat. 2
GHS & EU 1272/2008 Hazard Codes: H332, H312, H302, H319, H315
GHS & EU 1272/2008 Hazard Symbols/Pictograms: GHS07
Butyl Ester
Proprietary
Proprietary
3-7%
Cellulose, Butyrated
Proprietary
Proprietary
3-7%
UV Pigment
Proprietary
Proprietary
< 1%
EU 67/548 Hazard Classification: Flammable
EU 67/548 Risk Phrase Codes: R10, R66, R67
EU 67/548 Hazard Symbols: None
GHS & EU 1272/2008 Classification: Flammable Liquid Cat. 3, STOT
Inhalation SE Cat. 3
GHS & EU 1272/2008 Hazard Codes: H226, H336
GHS & EU 1272/2008 Hazard Symbols/Pictograms: GHS02, GHS07
EU 67/548 Hazard Classification: Not Classified
GHS & EU 1272/2008 Classification: Not Classified
EU 67/548 Hazard Classification: Not Classified
GHS & EU 1272/2008 Classification: Not Classified
See Section 16 for Full Text of all Hazard Codes and Precautionary Statements, Hazard Codes and Precautionary Statements
4. FIRST-AID MEASURES
PROTECTION OF FIRST AID RESPONDERS: RESCUERS SHOULD NOT ATTEMPT TO RETRIEVE VICTIMS OF
EXPOSURE TO THIS MATERIAL WITHOUT ADEQUATE PERSONAL PROTECTIVE EQUIPMENT. Rescuers
should be taken for medical attention, if necessary. Only trained personnel should administer supplemental oxygen
and/or cardio-pulmonary resuscitation, if necessary.
IMMEDIATE MEDICAL ATTENTION NEEDED: If adverse effect occurs.
INHALATION: If mists, sprays or fumes of this material are inhaled, remove victim to fresh air. If necessary, use artificial respiration
to support vital functions. Seek medical attention if adverse effect occurs after removal to fresh air.
SKIN EXPOSURE: If the material contaminates the skin, immediately begin decontamination with running water. Minimum flushing
is for 20 minutes. Do not interrupt flushing. Remove exposed or contaminated clothing, taking care not to contaminate eyes.
Victim must seek immediate medical attention if adverse effects occur after flushing.
EYE EXPOSURE: If this product enters the eyes, open victim's eyes while under gently running water. Use sufficient force to open
eyelids. Have victim "roll" eyes. Minimum flushing is for 20 minutes. Do not interrupt flushing. Seek medical attention if adverse
effect occurs after flushing.
INGESTION: If this material is swallowed, CALL PHYSICIAN OR POISON CONTROL CENTER FOR MOST CURRENT
INFORMATION. DO NOT INDUCE VOMITING, unless directly by medical personnel. Have victim rinse mouth with water or give
several cupfuls of water, if conscious. Never induce vomiting or give diluents (milk or water) to someone who is unconscious,
having convulsions, or unable to swallow. If vomiting occurs, lean patient forward or place on left side (head-down position, if
possible) to maintain an open airway and prevent aspiration. Seek medical attention.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Skin, and respiratory conditions and central nervous system
and blood disorders may be aggravated by overexposure to this product.
INDICATION OF IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT IF NEEDED: Treat symptoms and
eliminate exposure.
5. FIRE-FIGHTING MEASURES
FLASH POINT (TOC): 28.3°C (83°F)
AUTOIGNITION TEMPERATURE: Not available.
FLAMMABLE LIMITS (in air by volume, %):
LEL = 2.5%
82-0290-01 REV. A
UEL: 12.0%
EFFECTIVE DATE: JUNE 13, 2011
PAGE 2 OF 15
5. FIRE-FIGHTING MEASURES
FIRE EXTINGUISHING MEDIA: Water fog or fine spray, appropriate foam for
solvent solutions, carbon dioxide and dry chemical. Water or foam may cause
frothing and must be used correctly.
UNSUITABLE FIRE EXTINGUISHING MEDIA: None known.
SPECIAL FIRE AND EXPLOSION HAZARDS: This product is flammable and
can ignite when exposed to temperature of its flash point. Both liquid and vapors
pose fire hazard. When involved in a fire, this material may ignite and produce
toxic gases (including carbon monoxide, carbon dioxide, nitrogen oxides, acetic
acid, n-butanol, peroxides). Vapors can travel to distant locations and flashback
to source of fire.
Explosion Sensitivity to Mechanical Impact: Not sensitive.
Explosion Sensitivity to Static Discharge: May be sensitive, may accumulate static charge
by agitation or pouring.
NFPA RATING
FLAMMABILITY
3
HEALTH
0
2
INSTABILITY
OTHER
Hazard Scale: 0 = Minimal 1 = Slight
2 = Moderate 3 = Serious 4 = Severe
ADVICE TO FIRE-FIGHTERS: Structural firefighters must wear Self-Contained Breathing Apparatus and full protective
equipment. Water spray can be used to cool fire-exposed containers. If this material is involved in a fire, fire runoff water
should be contained to prevent possible environmental damage. If necessary, decontaminate fire-response equipment
with soap and water solution.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS AND EMERGENCY PROCEDURES: Uncontrolled releases should be responded to by
trained personnel using pre-planned procedures. Proper protective equipment should be used. Eliminate all sources of
ignition. Use non-sparking tools. Do not touch or walk through spilled material. Stop leak if you can do it without risk.
Avoid allowing water runoff to contact spilled material. The atmosphere must at least 19.5 percent Oxygen before nonemergency personnel can be allowed in the area without Self-Contained Breathing Apparatus. Spills on certain surfaces
may be slippery and present a slip hazard.
PERSONAL PROTECTIVE EQUIPMENT: Proper protective equipment should be used.
Small Spills: Wear rubber gloves, splash goggles, and appropriate body protection.
Large Spills: Minimum Personal Protective Equipment should be rubber gloves, rubber boots, face shield, and Tyvek suit.
Minimum level of personal protective equipment for releases in which the level of oxygen is less than 19.5% or is unknown
must be Level B: Full-face or half-mask, air purifying respirators (NIOSH approved); hooded chemical-resistant clothing
(overalls; two-piece chemical-splash suit; disposable chemical-resistant overalls); coveralls; gloves, outer, chemical-resistant;
gloves, inner, chemical-resistant; boots (outer), chemical-resistant steel toe and shank; boot-covers, outer, chemical-resistant
(disposable); hard hat; escape mask; face shield.
METHODS FOR CLEAN-UP AND CONTAINMENT: Eliminate all sources of ignition before cleanup begins.
Small Spills: Absorb spilled liquid with paper towels or other suitable absorbent materials. Wash contaminated area with soap and
water, absorb with paper towels, and rinse with water. Place spill material and all clean-up materials in appropriate container for
disposal.
Large Spills: Dike spill to prevent spread. Absorb spill with polypads or other non-reactive material. Monitor area for combustible
vapor levels from potential and confirm levels are bellow exposure limits given in Section 8 (Exposure Controls-Personal
Protection), if applicable, before non-response personnel are allowed into the spill area. Place spill material and all clean-up
materials in appropriate container for disposal. Decontaminate area thoroughly.
All Spills: Place all spill residue in a double plastic bag or other containment and seal. Decontaminate the area thoroughly. Do not
mix with wastes from other materials. Dispose of in accordance with applicable Federal, State, and local procedures (see Section
13, Disposal Considerations). For spills on water, contain, minimize dispersion and collect. Dispose of recovered material and
report spill per regulatory requirements.
ENVIRONMENTAL PRECAUTIONS: Avoid release to the environment. Run-off water may be contaminated by other
materials and should be contained to prevent possible environmental damage. Spills on water can cover water surface
and cause oxygen-deprivation in the aquatic environment, as well as coat marine life. All effort must be made to avoid
spills to the marine environment.
REFERENCE TO OTHER SECTIONS: See information in Section 8 (Exposure Controls – Personal Protection) and
Section 13 (Disposal Considerations) for additional information.
7. HANDLING and USE
PRECAUTIONS FOR SAFE HANDLING: All employees who handle this material should be trained to handle it safely.
As with all chemicals, avoid getting this product ON YOU or IN YOU. Use in a well-ventilated location, segregated from
other materials and operations. Minimize all exposures to this substance, including airborne aerosols. Do not eat, drink,
smoke, or apply cosmetics while handling this product. Remove contaminated clothing immediately. Wash thoroughly
after handling this product. Containers of this product must be properly labeled. Use non-sparking tools. Bond and
ground containers during transfers of material. Spills of this product on certain surfaces may present a slip hazard.
CONDITIONS FOR SAFE STORAGE: Keep away from heat, sparks, and other sources of ignition. Keep from freezing.
Keep away from food and drinking water. Keep container tightly closed when not in use. Store containers in a cool, dry
location, away from direct sunlight, sources of intense heat, or where freezing is possible.
82-0290-01 REV. A
EFFECTIVE DATE: JUNE 13, 2011
PAGE 3 OF 15
7. HANDLING and USE (Continued)
CONDITIONS FOR SAFE STORAGE (continued): Material should be stored in secondary containers or in a diked area,
as appropriate. Store containers away from incompatible chemicals (see Section 10, Stability and Reactivity). Containers
should be separated from oxidizing materials by a minimum distance of 20 ft. or by a barrier of non-combustible material at
least 5 ft. high having a fire-resistance rating of at least 0.5 hours. Storage areas should be made of fire resistant
materials. Post warning and “NO SMOKING” signs in storage and use areas, as appropriate. Have appropriate
extinguishing equipment in the storage area (e.g., sprinkler system, portable fire extinguishers). Inspect all incoming
containers before storage to ensure containers are properly labeled and not damaged. Refer to NFPA 30, Flammable and
Combustible Liquids Code, for additional information on storage. Empty containers may contain residual liquid or vapors
that are flammable; therefore, empty containers should be handled with care.
SPECIFIC END USE(S): This product is used for industrial fluorescent coding on non-porous materials. Follow all
industry standards for use of this product.
PROTECTIVE PRACTICES DURING MAINTENANCE OF CONTAMINATED EQUIPMENT: Follow practices indicated
in Section 6 (Accidental Release Measures). Make certain that application equipment is locked and tagged-out safely.
Always use this product in areas where adequate ventilation is provided. Decontaminate equipment thoroughly, before
maintenance begins. Collect all rinsates and dispose of according to applicable Federal, State, or local procedures, or
applicable standards.
8. EXPOSURE CONTROLS - PERSONAL PROTECTION
EXPOSURE LIMITS/CONTROL PARAMETERS:
VENTILATION AND ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering
controls to maintain airborne levels below recommended exposure limits provided in this section, if applicable. Exhaust directly
to the outside, taking necessary precautions for environmental protection. An eyewash and safety shower should be readily
accessible.
OCCUPATIONAL EXPOSURE LIMITS:
CHEMICAL NAME
CAS #
EXPOSURE LIMITS IN AIR
ACGIH-TLVS
TWA
STEL
ppm
ppm
OSHA-PELs
TWA
STEL
ppm
ppm
NIOSH-RELs
TWA
STEL
ppm
ppm
NIOSH
IDLH
ppm
OTHER
DFG MAKs:
TWA = 10 (sum of
concentration of) [skin]
PEAK = 2•MAK 15 min.
average value, 1-hr interval, 4
per shift
DFG MAK Pregnancy Risk
Classification: C
Carcinogen: EPA-CBD, EPA-C,
IARC-3, MAK-4, TLV-A3
DFG MAKs:
TWA = 100
PEAK = 2•MAK 15 min.
average value, 1-hr interval, 4
per shift
DFG MAK Pregnancy Risk
Classification: C
Proprietary Glycol Ether
20
NE
50 (skin)
25 (skin)
1989 Vacated
PEL
NE
5 (skin)
NE
700
Proprietary Butyl Ester
150
200
150
200
(Vacated
1989
PEL)
150
200
1700
(based
on 10%
of LEL)
10
mg/m3
NE
15 mg/m3
(total dust), 5
mg/m3 (resp.
fraction)
NE
10 mg/m3
(total dust), 5
mg/m3 (resp.
fraction)
NE
NE
200
400
400
500
(Vacated
1989
PEL)
400
500
2000
(based
on 10%
of LEL)
NE
NE
NE
NE
NE
NE
NE
Proprietary Cellulose, Butyrated
Exposure limits given are for
cellulose
Isopropyl Alcohol
Proprietary UV Pigment
67-63-0
ppm
NE
DFG MAKs:
TWA = 200
PEAK = 2•MAK 15 min.
average value, 1-hr interval, 4
per shift
DFG MAK Pregnancy Risk
Classification: C
Carcinogen: IARC-3, TLV-A4
NE
NE = Not Established. See Section 16 for Definition of Terms Used
INTERNATIONAL EXPOSURE LIMITS: Currently, the following international exposure limits are in place components of this
product. Exposure limits can change and should be checked for currency.
GLYCOL ETHER:
3
3
Australia: TWA = 20 ppm (96.9 mg/m ), STEL = 50 ppm (242 mg/m ), JUL
2008
Belgium: TWA = 20 ppm (98 mg/m3), MAR 2002
Belgium: STEL = 50 ppm (246 mg/m3), Skin, MAR 2002
Denmark: TWA = 20 ppm (98 mg/m3), OCT 2002
EC: TWA = 98 mg/m3 (20 ppm); STEL = 246 mg/m3 (skin), FEB 2006
82-0290-01 REV. A
GLYCOL ETHER (continued):
3
3
Finland: TWA = 20 ppm (98 mg/m ), STEL = 50 ppm (250 mg/m ), Skin,
SEP 2009
France: VME = 2 ppm (9.8 mg/m3), VLE = 30 ppm (147.6 mg/m3), Skin,
FEB 2006
Germany: MAK = 98 mg/m3 (20 mL/m3), 2005
Hungary: TWA = 98 mg/m3, STEL = 246 mg/m3, Skin, SEP 2000
EFFECTIVE DATE: JUNE 13, 2011
PAGE 4 OF 15
8. EXPOSURE CONTROLS - PERSONAL PROTECTION (Continued)
EXPOSURE LIMITS/CONTROL PARAMETERS (continued):
INTERNATIONAL EXPOSURE LIMITS (continued):
GLYCOL ETHER (continued):
3
Korea: TWA = 25 ppm (120 mg/m ), skin, 2006
Mexico: TWA = 26 ppm (120 mg/m3); STEL = 75 ppm (skin), 2004
The Netherlands: MAC-TGG = 100 mg/m3, Skin, 2003
New Zealand: TWA = 25 ppm (121 mg/m3), skin, JAN 2002
Norway: TWA = 20 ppm (100 mg/m3), JAN 1999
The Philippines: TWA = 50 ppm (240 mg/m3), Skin, JAN 1993
Poland: MAC(TWA) = 100 mg/m3, MAC(STEL) = 360 mg/m3, JAN 1999
Russia: STEL = 5 mg/m3, JUN 2003
Sweden: TWA = 10 ppm (50 mg/m3); STEL = 20 ppm (100 mg/m3), Skin,
JUN 2005
Switzerland: MAK-W = 10 ppm (49 mg/m3); KZG-W = 20 ppm (98 mg/m3),
Skin, DEC 2006
Turkey: TWA = 50 ppm (240 mg/m3), JAN 1993
United Kingdom: TWA = 25 ppm; STEL = 50 ppm (skin), 2005
In Argentina, Bulgaria, Colombia, Jordan, Singapore, Vietnam check ACGIH
TLV
BUTYL ESTER:
Australia: TWA = 150 ppm (710 mg/m3), STEL = 200 ppm (950 mg/m3), JUL
2008
Belgium: TWA = 150 ppm(723 mg/m3), STEL = 200 ppm(964 mg/m3), MAR
2002
Denmark: TWA = 150 ppm (710 mg/m3), OCT 2002
Finland: TWA = 150 ppm (720 mg/m3), STEL = 200 ppm (960 mg/m3), SEP
2009
France: VME = 150 ppm (710 mg/m3), VLE = 200 ppm (940 mg/m3), FEB
2006
Germany: MAK = 480 mg/m3 (100 mL/m3), 2005
Hungary: TWA = 950 mg/m3, STEL = 950 mg/m3, SEP 2000
Japan: OEL = 100 ppm (475 mg/m3), APR 2007
Korea: TWA = 150 ppm (710 mg/m3), STEL = 200 ppm (950 mg/m3), 2006
Mexico: TWA = 150 ppm (710 mg/m3); STEL = 200 ppm (950 mg/m3), 2004
The Netherlands: MAC-TGG = 710 mg/m3, 2003
New Zealand: TWA = 150 ppm (713 mg/m3); STEL = 200 ppm (950 mg/m3),
JAN 2002
Norway: TWA = 75 ppm (355 mg/m3), JAN 1999
The Philippines: TWA = 150 ppm (710 mg/m3), JAN 1993
Poland: MAC(TWA) = 200 mg/m3, MAC(STEL) = 950 mg/m3, JAN 1999
BUTYL ESTER (continued):
3
3
Russia: TWA = 50 mg/m , STEL = 200 mg/m , JUN 2003
Sweden: TWA = 100 ppm (500 mg/m3); STEL = 150 ppm (700 mg/m3), JUN
2005
Switzerland: MAK-W = 100 ppm (480 mg/m3); KZG-W = 200 ppm (960
mg/m3), DEC 2006
Turkey: TWA = 150 ppm (710 mg/m3), JAN 1993
United Kingdom: TWA = 150 ppm (724 mg/m3); STEL = 200 ppm, 2005
In Argentina, Bulgaria, Colombia, Jordan, Singapore, Vietnam check ACGIH
TLV
ISOPROPYL ALCOHOL:
Australia: TWA = 400 ppm (983 mg/m3), STEL = 500 ppm (1230 mg/m3),
JUL 2008
Belgium: TWA =400 ppm (997 mg/m3), MAR 2002
Belgium: STEL = 500 ppm (1248 mg/m3), MAR 2002
Denmark: TWA = 200 ppm (490 mg/m3), OCT 2002
Finland: TWA = 200 ppm (500 mg/m3), STEL = 250 ppm (620 mg/m3), SEP
2009
France: VLE = 400 ppm (980 mg/m3), FEB 2006
Germany: MAK = 500 mg/m3 (200 mL/m3), 2005
Hungary: TWA = 500 mg/m3, STEL = 2000 mg/m3, Skin, SEP 2000
Japan: OEL-C = 400 ppm (980 mg/m3), APR 2007
Korea: TWA = 400 ppm (980 mg/m3), STEL = 500 ppm (1225 mg/m3), 2006
Mexico: TWA = 400 ppm (980 mg/m3); STEL = 500 ppm (1225 mg/m3),
2004
The Netherlands: MAC-TGG = 650 mg/m3, 2003
New Zealand: TWA = 400 ppm (983 mg/m3); STEL = 500 ppm (1230
mg/m3), JAN 2002
The Philippines: TWA = 400 ppm (980 mg/m3), JAN 1993
Poland: MAC(TWA) = 900 mg/m3, MAC(STEL) = 1200 mg/m3, JAN 1999
Russia: TWA = 10 mg/m3, STEL = 50 mg/m3, JUN 2003
Sweden: TWA = 150 ppm (350 mg/m3); STEL = 250 ppm (600 mg/m3), JUN
2005
Switzerland: MAK-W = 200 ppm (500 mg/m3), KZG-W = 400 ppm (1000
mg/m3), DEC 2006
Turkey: TWA = 200 ppm (500 mg/m3), JAN 1993
United Kingdom: TWA = 400 ppm (999 mg/m3); STEL = 500 ppm, 2005
In Argentina, Bulgaria, Colombia, Jordan, Singapore, Vietnam check ACGIH
TLV
PERSONAL PROTECTIVE EQUIPMENT:
The following information on appropriate Personal Protective Equipment is provided to assist employers in complying with
regulations found in U.S. OSHA 29 CFR Subpart I (beginning at 1910.132), equivalent standards of Canada (including CSA
Standard Z94.4-02 and CSA Standard Z94.3-02) or standards of EU member states (including EN 529:2005 for respiratory PPE,
CEN/TR 15419:2006 for hand protection, and CR 13464:1999 for face/eye protection). Please reference applicable regulations
and standards for relevant details.
RESPIRATORY PROTECTION: Maintain airborne contaminant concentrations below exposure limits listed in this section, if
applicable. Use a NIOSH air purifying respirator with amine/organic vapor/high-efficiency particulate (HEPA) filter cartridges
when exposure is likely. If respiratory protection is needed, use only protection authorized in the U.S. Federal OSHA Respiratory
Protection Standard (29 CFR 1910.134) and equivalent U.S. State standards, Canadian CSA Standard Z94.4-93 and the
European Standard EN 529:2005 and Respiratory Protection Standards of EU member states. Oxygen levels below 19.5% are
considered IDLH by OSHA. In such atmospheres, use of a full-facepiece pressure/demand SCBA or a full facepiece, supplied air
respirator with auxiliary self-contained air supply is required under OSHA’s Respiratory Protection Standard (1910.134-1998). The
following are NIOSH respiratory protection guidelines for the main solvent components.
GLYCOL ETHER
CONCENTRATION
Up to 50 ppm:
Up to 125 ppm:
RESPIRATORY PROTECTION
Any Chemical Cartridge Respirator with organic vapor cartridge(s), or any Supplied-Air Respirator (SAR).
Any SAR operated in a continuous-flow mode, or any Powered, Air-Purifying Respirator (PAPR) with
organic vapor cartridge.
Up to 250 ppm:
Any Chemical Cartridge Respirator with a full facepiece and organic vapor cartridge(s), or any Air-Purifying,
Full-Facepiece Respirator (gas mask) with a chin-style, front- or back-mounted organic vapor canister, or
any PAPR with a tight-fitting facepiece and organic vapor cartridge(s), or any Self-Contained Breathing
Apparatus (SCBA) with a full facepiece, or any SAR with a full facepiece.
Up to 700 ppm:
Any SAR that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode.
Emergency or Planned Entry Into Unknown Concentrations or IDLH Conditions: Any SCBA that has a full facepiece and is operated in
a pressure-demand or other positive-pressure mode, or any SAR that has a full facepiece and is operated
in a pressure-demand or other positive-pressure mode in combination with an auxiliary SCBA operated in
pressure-demand or other positive-pressure mode.
Escape:
Any Air-Purifying, Full-Facepiece Respirator (gas mask) with a chin-style, front- or back-mounted organic
vapor canister, or any appropriate escape-type, SCBA.
82-0290-01 REV. A
EFFECTIVE DATE: JUNE 13, 2011
PAGE 5 OF 15
8. EXPOSURE CONTROLS - PERSONAL PROTECTION (Continued)
PERSONAL PROTECTIVE EQUIPMENT (continued):
RESPIRATORY PROTECTION (continued):
ISOPROPANOL
CONCENTRATION
Up to 2000 ppm:
RESPIRATORY PROTECTION
Any Supplied-Air Respirator (SAR) operated in a continuous-flow mode, or any Chemical Cartridge
Respirator with a full facepiece and organic vapor cartridge(s), or any Air-Purifying, Full-Facepiece
Respirator (gas mask) with a chin-style, front- or back-mounted organic vapor canister, or any Powered,
Air-Purifying Respirator (PAPR) with organic vapor cartridge(s), or any Self-Contained Breathing Apparatus
(SCBA) with a full facepiece, or any SAR with a full facepiece.
Emergency or Planned Entry into Unknown Concentrations or IDLH Conditions: Any SCBA that has a full facepiece and is operated in
a pressure-demand or other positive-pressure mode, or any SAR that has a full facepiece and is operated
in a pressure-demand or other positive-pressure mode in combination with an auxiliary SCBA operated in
pressure-demand or other positive-pressure mode.
Escape:
Any Air-Purifying, Full-Facepiece Respirator (gas mask) with a chin-style, front- or back-mounted organic
vapor canister, or any appropriate escape-type, SCBA.
EYE PROTECTION: Not normally needed for handling of small quantities. If handling more than several ounces, wear splash
goggles or safety glasses. If necessary, refer to U.S. OSHA 29 CFR 1910.133, the Canadian CSA Standard Z94.3-M1982,
Industrial Eye and Face Protectors or the European Standard CR 13464:1999 for further information.
HAND PROTECTION: Wear rubber or other appropriate glove to avoid skin contact. Use triple gloves for spill response, as stated in
Section 6 (Accidental Release Measures) of this MSDS. If necessary, refer to U.S. OSHA 29 CFR 1910.138, appropriate
Standards of Canada or the European Standard CEN/TR 15419:2006.
BODY PROTECTION: Coveralls or apron when handling large quantity. If necessary, refer to appropriate Standards of Canada
for further information or the European Standard CEN/TR 15419:2006. If a hazard of injury to the feet exists due to falling
objects, rolling objects, where objects may pierce the soles of the feet or where employee’s feet may be exposed to electrical
hazards, use foot protection, as described in U.S. OSHA 29 CFR 1910.136 and the Canadian CSA Standard Z195-M1984,
Protective Footwear.
9. PHYSICAL and CHEMICAL PROPERTIES
FORM: Liquid.
COLOR: Clear; fluoresces blue in UV light.
ODOR: Aromatic.
EVAPORATION RATE (nBuAc): 1.2
ODOR THRESHOLD: For Glycol Ether: 0.10 ppm (detection); 0.48 ppm (100% recognition)
VAPOR DENSITY (air = 1): 2
VAPOR PRESSURE @ 20°C: 8-12
BOILING POINT: 126.7°C (260°F)
FREEZING POINT: Not available.
SPECIFIC GRAVITY (water = 1): 0.85
pH: Not available.
SOLUBILITY IN WATER: Immiscible.
OTHER SOLUBILITIES: Not available.
LOG COEFFICIENT WATER/OIL DISTRIBUTION: Not determined.
HOW TO DETECT THIS SUBSTANCE (identification properties): The appearance or odor may be a method to identify
this product in event of an accidental release.
10. STABILITY and REACTIVITY
REACTIVITY/CHEMICAL STABILITY: This product is stable under normal conditions. Due to the Glycol Ether
component, prolonged storage of this product which is in contact with air, may produce unstable peroxides. These
peroxides are unlikely to be hazardous unless they are concentrated during distillation or allowed to evaporate to
dryness.
DECOMPOSITION PRODUCTS: Hydrolysis: None. Combustion: Carbon monoxide, carbon dioxide, nitrogen oxides,
acetic acid, n-butanol, peroxides.
MATERIALS WITH WHICH SUBSTANCE IS INCOMPATIBLE: This product is incompatible with strong oxidizing
agents, strong acids, potassium tert-butoxide, bases, perchloric acid. Due to the Glycol Ether component, this product
may attack some forms of stainless steels (types 301, 302 and 440) and copper and may attack plastics such as
chlorinated polyvinyl chloride (CPVC), polyvinyl chloride (PVC), polyethylene terephthalate, high-density polyethylene,
and ethylene vinyl acetate; elastomers, like Viton (FKM), nitrile Buna-N (NBR), chloroprene, isoprene, natural rubber,
polymethacrylate (acrylic) and silicone; and coatings, such as coal tar epoxy, epoxy general purpose and epoxy
chemical resistant.
POSSIBILITY OF HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: Contact with incompatible materials, and exposure to excessive temperatures.
11. T OXIC OL OG IC AL INF OR MAT ION
SYMPTOMS OF OVEREXPOSURE BY ROUTE OF EXPOSURE: The most significant routes of occupational
overexposure are anticipated to be by inhalation, skin and eye contact. The following symptoms of overexposure to this
product are anticipated to be as follows:
INHALATION: Inhalation of vapors, mists or sprays from this product may irritate the tissues of the nose, mouth, throat,
and upper respiratory system. Inhalation may also lead to adverse central nervous system effects, such as headache,
dizziness, drowsiness, incoordination, nausea and vomiting.
82-0290-01 REV. A
EFFECTIVE DATE: JUNE 13, 2011
PAGE 6 OF 15
11. TOXICOLOGICAL INFORMATION (Continued)
INHALATION (continued): Due to the presence of the Glycol Ether
HAZARDOUS MATERIAL IDENTIFICATION SYSTEM
component, inhalation at low concentrations may cause severe blood
system effects (red blood cell fragility, hemoglobinuria), adverse liver
effects, reduced respiratory rates, based on animal test results.
(BLUE) 2*
HEALTH HAZARD
Exposure to the concentration that produced these effects is expected
to produce intolerable eye, nose and throat irritation (sensory irritation)
in humans.
CONTACT WITH SKIN or EYES: Skin contact with this product may be
irritating, especially if prolonged. Chronic or repeated skin exposure
FLAMMABILITY HAZARD (RED) 3
may cause dermatitis (dry, red, itchy skin). Eye contact can be
moderately to severely irritating, causing stinging, redness and tearing.
SKIN ABSORPTION: Components of this product can be absorbed via
intact skin. If large area of the skin is involved, adverse systemic effects
PHYSICAL HAZARD (YELLOW) 0
as described under ‘Inhalation’ may occur.
INGESTION: Ingestion is not anticipated to be a likely route of
occupational overexposure for this product. Ingestion may be harmful or
PROTECTIVE EQUIPMENT
fatal. Adverse blood effects may occur. Ingestion may cause adverse
central nervous system effects such as described under ‘Inhalation’.
INJECTION: Injection is not anticipated to be a significant route of
EYES
HANDS
BODY
RESPIRATORY
overexposure for this product. If this product is “injected” (as may occur
through punctures by contaminated, sharp objects), local swelling and
SEE SECTION 8
irritation can occur.
HEALTH EFFECTS OR RISKS FROM EXPOSURE: An Explanation
in Lay Terms. Over-exposure to this product may cause the following
For Routine Industrial Use and Handling Applications
health effects:
Hazard Scale: 0 = Minimal 1 = Slight
ACUTE: Contact via inhalation and skin or eye contact may cause
2 = Moderate 3 = Serious 4 = Severe *Chronic Hazard
irritation. Eye irritation may be severe. Ingestion or inhalation exposure
may be harmful or fatal.
CHRONIC: Chronic skin contact may cause dermatitis. Chronic exposure may cause adverse effects on the blood
system.
TARGET ORGANS: Acute: Skin, eyes, respiratory system, blood system, central nervous system. Chronic: Skin,
blood system.
TOXICITY DATA: The following data are available for components of greater than 1% concentration. Only available
human data, LD50 Oral-Rat, Oral-Mouse and Skin-Rabbit, LC50 Inhalation-Rat and Inhalation-Mouse, Draize data and
mutagenic data is provided in this MSDS. Contact UVP for more information.
BUTYL ESTER:
Standard Draize Test (Eye-Human) 300 ppm
TCLo (Inhalation-Human) 200 ppm: Sense Organs and
Special Senses (Olfaction): effect, not otherwise
specified; Sense Organs and Special Senses (Eye):
conjunctive irritation; Lungs, Thorax, or Respiration:
other changes
Standard Draize Test (Eye-Rabbit) 100 mg: Moderate
Standard Draize Test (Skin-Rabbit) 500 mg/24 hours:
Moderate
LC50 (Inhalation-Rat) 390 ppm/4 hours: Behavioral:
changes in motor activity (specific assay); Lungs,
Thorax, or Respiration: acute pulmonary edema;
Blood: hemorrhage
LC50 (Inhalation-Mouse) 6 gm/m3/2 hours
LD50 (Oral-Rat) 10,768 mg/kg: Behavioral: somnolence
(general depressed activity); Lungs, Thorax, or
Respiration: other changes; Liver: other changes
LD50 (Oral-Mouse) 6 gm/kg
LD50 (Oral-Rabbit) 3200 mg/kg
LD50 (Skin-Rabbit) > 17,600 mg/kg
GLYCOL ETHER:
Open Irritation Test (Skin-Rabbit) 500 mg: Mild
Standard Draize Test (Eye-Rabbit) 100 mg: Severe
Standard Draize Test (Eye-Rabbit) 100 mg/24 hours:
Moderate
LDLo (Oral-Human) 143 mg/kg
TDLo (Oral-Woman) 600 mg/kg: Behavioral: coma;
Lungs, Thorax, or Respiration: dyspnea; Nutritional and
Gross Metabolic: metabolic acidosis
TDLo (Oral-Woman) 7813 µL/kg: Behavioral: coma;
Vascular: BP lowering not characterized in autonomic
section; Nutritional and Gross Metabolic: metabolic
acidosis
TCLo
(Inhalation-Human)
195
ppm/8
hours:
Gastrointestinal: nausea or vomiting
GLYCOL ETHER (continued):
TCLo (Inhalation-Human) 100 ppm: Sense Organs and
Special Senses (Olfaction): effect, not otherwise
specified; Sense Organs and Special Senses (Eye):
effect, not otherwise specified; Lungs, Thorax, or
Respiration: other changes
TCLo (Inhalation-Human) 1500 mg/m3: Sense Organs
and Special Senses (Eye): conjunctive irritation; Liver:
other changes; Kidney/Ureter/Bladder: other changes
LC50 (Inhalation-Rat) 450 ppm/4 hours: Behavioral:
ataxia; Nutritional and Gross Metabolic: weight loss or
decreased weight gain
LC50 (Inhalation-Rat) 2900 mg/m3/7 hours: Liver: other
changes; Kidney/Ureter/Bladder: other changes; Blood:
other hemolysis with or without anemia
LC50 (Inhalation-Mouse) 3380 mg/m3/7 hours: Liver: other
changes; Kidney/Ureter/Bladder: other changes; Blood:
other hemolysis with or without anemia
LC50 (Inhalation-Mouse) 700 ppm/7 hours: Behavioral:
analgesia; Lungs, Thorax, or Respiration: dyspnea;
Kidney/Ureter/Bladder: hematuria
LD50 (Oral-Rat) 470 mg/kg
LD50 (Oral-Rat) 917 mg/kg: Liver: other changes;
Kidney/Ureter/Bladder: other changes; Blood: other
hemolysis with or without anemia
LD50 (Oral-Mouse) 1230 mg/kg: Behavioral: altered sleep
time (including change in righting reflex), somnolence
(general depressed activity); Skin and Appendages:
hair
LD50 (Oral-Mouse) 1167 mg/kg: Liver: other changes;
Kidney/Ureter/Bladder: other changes; Blood: other
hemolysis with or without anemia
LD50 (Skin-Rabbit) 220 mg/kg
ISOPROPYL ALCOHOL:
TDLo (Oral-Man) 14,432 mg/kg: Behavioral: coma;
Vascular: BP lowering not characterized in autonomic
section; Lungs, Thorax, or Respiration: dyspnea
82-0290-01 REV. A
ISOPROPYL ALCOHOL (continued):
TDLo
(Oral-Human)
223
mg/kg:
Behavioral:
hallucinations, distorted perceptions; Cardiac: pulse
rate; Vascular: BP lowering not characterized in
autonomic section
TDLo (Oral-Human) 286 mg/kg: Cardiac: arrhythmias
(including changes in conduction); Behavioral: coma;
Kidney/Ureter/Bladder: other changes
TDLo (Oral-Infant) 13 gm/kg: Behavioral: somnolence
(general
depressed
activity),
irritability;
Gastrointestinal: nausea or vomiting
TDLo (Unreported-Human) 1375 mg/kg: Sense Organs
and Special Senses (Eye): effect, not otherwise
specified; Behavioral: somnolence (general depressed
activity), hallucinations, distorted perceptions
LDLo (Oral-Man) 5272 mg/kg: Behavioral: coma;
Vascular: BP lowering not characterized in autonomic
section; Lungs, Thorax, or Respiration: chronic
pulmonary edema
LDLo (Oral-Human) 3570 mg/kg: Behavioral: coma;
Lungs, Thorax, or Respiration: respiratory depression;
Gastrointestinal: nausea or vomiting
LDLo (Oral-Human) 571 mL/kg
LDLo (Unreported-Human) 2 mL/kg
LDLo (Unreported-Human) 2770 mg/kg
TCLo (Inhalation-Human) 35 ppm/4 hours: Cardiac: pulse
rate; Lungs, Thorax, or Respiration: other changes
TCLo (Inhalation-Human) 150 ppm/2 hours: Biochemical:
Enzyme inhibition, induction, or change in blood or
tissue levels: other Enzymes
Standard Draize Test (Skin-Rabbit) 500 mg: Mild
Standard Draize Test (Eye-Rabbit) 100 mg: Severe
Standard Draize Test (Eye-Rabbit) 10 mg: Moderate
Standard Draize Test (Eye-Rabbit) 100 mg/24 hours:
Moderate
LD50 (Oral-Rat) 5045 mg/kg: Behavioral: altered sleep
time (including change in righting reflex), somnolence
(general depressed activity)
EFFECTIVE DATE: JUNE 13, 2011
PAGE 7 OF 15
11. TOXICOLOGICAL INFORMATION (Continued)
TOXICITY DATA (continued):
ISOPROPYL ALCOHOL (continued):
LD50 (Skin-Rabbit) 12,800 mg/kg
LD50 (Oral-Rat) 5000 mg/kg: Behavioral:
anesthetic
general
ISOPROPYL ALCOHOL (continued):
LD50 (Oral-Mouse) 3600 mg/kg: Behavioral: altered sleep
time (including change in righting reflex), somnolence
(general depressed activity)
LD50 (Oral-Mouse) 3600 mg/kg: Behavioral: general
anesthetic
ISOPROPYL ALCOHOL (continued):
PROPRIETARY UV PIGMENT:
LD50 (Oral-Rat) 5 gm/kg
LD50 (Oral-Mouse) 1780 mg/kg: Behavioral: somnolence
(general depressed activity), ataxia
CARCINOGENIC POTENTIAL: The components of this product are listed by agencies tracking the carcinogenic potential
of chemical compounds, as follows:
GLYCOL ETHER: ACGIH TLV-A3 (Confirmed Animal Carcinogen); EPA-CBD (Cannot Be Determined); EPA-C (Possible Human Carcinogen); IARC-3 (Unclassifiable as to
Carcinogenicity in Humans); MAK-4 (Substances with Carcinogenic Potential which genotoxicity plays no at most a minor role.)
ISOPROPYL ALCOHOL: ACGIH TLV-A4 (Not Classifiable as a Human Carcinogen); IARC-3 (Unclassifiable as to Carcinogenicity in Humans)
The remaining components of this product are not specifically listed by U.S. EPA, U.S. NTP, U.S. OSHA, U.S. NIOSH,
IARC, GERMAN MAK, and ACGIH and therefore is not considered to be, nor suspected to be, a cancer causing agent
by these agencies.
IRRITANCY OF PRODUCT: This product may be irritating to contaminated tissue.
SENSITIZATION TO THE PRODUCT: No component of this product is known to be a human skin or respiratory
sensitizer.
REPRODUCTIVE TOXICITY INFORMATION: No component of this product is reported to cause mutagenic,
embryotoxic, teratogenic or reproductive effects in humans. Animal data for some components indicated effects, but only
at doses that were also fatal to test animals and so are not considered adequate evidence of reproductive effect.
ACGIH BIOLOGICAL EXPOSURE INDICES: Currently, there following Biological Exposure Indices have been
determined for the components of this product.
CHEMICAL:
DETERMINANT
Isopropanol
• Acetone in urine
Glycol Ether
• Butoxyacetic acid in urine
SAMPLING TIME
BEI
• End of Shift End of Workweek
• 40 mg/L
• End of Shift
• 200 mg/g Creatinine
12. ECOLOGICAL INFORMATION
ALL WORK PRACTICES MUST BE AIMED AT ELIMINATING ENVIRONMENTAL CONTAMINATION.
MOBILITY: This product has not been tested for mobility in soil; it is expected to be highly mobile. The following
information is available for the main solvent components.
GLYCOL ETHER:
The Koc of this compound is estimated as 67, using a log Kow of 0.83 and a regression-derived equation. According to a classification scheme, this estimated Koc value
suggests that this material is expected to have high mobility in soil.
ISOPROPYL ALCOHOL:
The Koc of this compound is estimated as 25, using a measured log Kow of 0.05 and a regression-derived equation. According to a classification scheme, this estimated
Koc value suggests that this material is expected to have very high mobility in soil.
PERSISTENCE AND BIODEGRADABILITY: No specific data are available this product. The following information is
available for the main solvent components.
GLYCOL ETHER:
If released to air, a vapor pressure of 0.88 mm Hg at 25°C indicates this compound will exist solely as a vapor in the ambient atmosphere. Vapor-phase material will be
degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals; the half-life for this reaction in air is estimated to be 16 hours. If released to
soil, this material is expected to have high mobility based upon an estimated Koc of 67. Volatilization from moist soil surfaces is expected to be an important fate
process based upon a Henry's Law constant of 1.60X10-6 atm-cu m/mole. If released into water, this material is not expected to adsorb to suspended solids and
sediment based upon the estimated Koc. This compound reached 91% of its theoretical BOD in 14 days using an activated sludge inoculum. Therefore this compound
has the potential to biodegrade rapidly in water. Based upon this compound's estimated Henry's Law constant it is concluded that the volatilization of from water
surfaces may be an important fate process. The estimated volatilization half-lives for a model river and model lake are 25 and 185 days, respectively. Hydrolysis is not
expected to be an important environmental fate process since this compound lacks functional groups that hydrolyze under environmental conditions.
ISOPROPYL ALCOHOL:
Based on a classification scheme, an estimated Koc value of 25, determined from a log Kow of 0.05 and a regression-derived equation, indicates that this compound is
expected to have very high mobility in soil. Volatilization from moist soil surfaces is expected to be an important fate process given a Henry's Law constant of 8.10X106 atm-cu m/mole. The potential for volatilization of from dry soil surfaces may exist based upon a vapor pressure of 45.4 mmHg. This compound is readily degraded
in aerobic systems; the range of half-lives for aerobic degradation using a sewage sludge inoculum are < 1 day to 48 days. This material has also been shown to be
readily degraded under anaerobic conditions. Volatilization from water surfaces is expected based upon a Henry's Law constant of 8.10X10-6 atm-cu m/mole. Using
this Henry's Law constant and an estimation method, volatilization half-lives for a model river and model lake are 57 hours and 29 days, respectively. This material is
readily degraded in aerobic systems; the range of half-lives for aerobic degradation using a sewage sludge inoculum are < 1 day to 48 days. This compound has also
been shown to be readily degraded under anaerobic conditions. According to a model of gas/particle partitioning of semi-volatile organic compounds in the
atmosphere, this material, which has a vapor pressure of 45.4 mm Hg at 25°C, is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase material
is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals; the half-life for this reaction in air is estimated to be 3.2 days, calculated
from its rate constant of 5.07X10-12 cu cm/molecule-sec at 25°C.
BIO-ACCUMULATION POTENTIAL: This product has not been tested for bio-accumulation potential. The following
information is available for the main solvent components.
GLYCOL ETHER:
An estimated BCF of 3 was calculated for this compound, using an estimated log Kow of 0.83 and a regression-derived equation. According to a classification scheme,
this BCF suggests the potential for bioconcentration in aquatic organisms is low.
ISOPROPYL ALCOHOL:
An estimated BCF of 3 was calculated for Isopropanol, using a log Kow of 0.05 and a regression-derived equation. According to a classification scheme, this BCF
suggests the potential for bioconcentration in aquatic organisms is low.
82-0290-01 REV. A
EFFECTIVE DATE: JUNE 13, 2011
PAGE 8 OF 15
12. ECOLOGICAL INFORMATION (Continued)
ECOTOXICITY: This product has not been tested for aquatic or animal toxicity. The following aquatic toxicity data are
available for some components. Limited data is provided on this MSDS. Contact UVP for more information.
GLYCOL ETHER:
LC50 (Daphnia magna Waterflea) 24 hours = 1,720 mg/L;
static
LC50 (Lepomis macrochirus Bluegill) 96 hours = 1,490
mg/L; static
BUTYL ESTER:
LC50 (Lepomis macrochirus Bluegill) 96 hours = 100 ppm
at 23°C (static bioassay in fresh water, mild aeration
applied after 24 hours)
ISOPROPYL ALCOHOL:
LC50 (Daphnia magna) 24 hours = 9,500 mg/L
LC50 (fathead minnow) 24 hours = 11,160 mg/L
LC50 (fathead minnow) 48 hours = 11,130 mg/L
LC50 (fathead minnow) 96 hours = 11,130 mg/L
RESULTS OF PBT and vPvB ASSESSMENT: No data available. PBT and vPvB assessments are part of the chemical
safety report required for some substances in European Union Regulation (EC) 1907/2006, Article 14.
ENVIRONMENTAL EXPOSURE CONTROLS: Controls should be engineered to prevent release to the environment,
including procedures to prevent spills, atmospheric release and release to waterways.
OTHER ADVERSE EFFECTS: The components of this product are not listed as having ozone depletion potential.
13. DISPOSAL CONSIDERATIONS
WASTE TREATMENT/DISPOSAL METHODS: It is the responsibility of the generator to determine at the time of disposal
whether the product meets the criteria of a hazardous waste per regulations of the area in which the waste is generated
and/or disposed of. Waste disposal must be in accordance with appropriate Federal, State, and local regulations. This
product, if unaltered by use, may be disposed of by treatment at a permitted facility or as advised by your local hazardous
waste regulatory authority. Shipment of wastes must be done with appropriately permitted and registered transporters.
DISPOSAL CONTAINERS: Waste materials must be placed in and shipped in appropriate 5-gallon or 55 gallon poly or
metal waste pails or drums. Permeable cardboard containers are not appropriate and should not be used. Ensure that
any required marking or labeling of the containers be done to all applicable regulations.
PRECAUTIONS TO BE FOLLOWED DURING WASTE HANDLING: Wear proper protective equipment when handling
waste materials. Dispose of in accordance with applicable Federal, State, and local procedures and standards.
U.S. EPA WASTE NUMBER: Not applicable.
EWC WASTE CODES: 16 05 08: Discarded Organic Chemicals Consisting of or Containing Dangerous Substances.
14. TRANSPORTATION INFORMATION
U.S. DEPARTMENT OF TRANSPORTATION 49 CFR 172.101: This material is classified as Dangerous Goods, per
regulations of the DOT.
UN Identification Number:
UN 1993
Proper Shipping Name:
Flammable liquid, n.o.s. (Isopropyl Alcohol)
Hazard Class Number and Description:
3 (Flammable)
Packing Group:
III
Excepted Quantities:
E1
Dot Label(s) Required:
Class 3 (Flammable)
North American Emergency Response Guidebook Number, 2008: 128
Marine Pollutant: No component of this product meets the criteria of the DOT to be a Marine Pollutant, per Appendix B to 49 CFR
172.101
NOTE: Shipments of this product may be shipped under small quantity and limited quantity exceptions as indicated under 49 CFR §173.4 and 49
CFR §173.150, if all requirements are met.
Small Quantity Exception (49 CFR 173.4): Small quantities of Class 3 material are not subjected to other requirements of the Hazardous
Materials Regulations (Subchapter C) when the maximum quantity per inner receptacle is limited to 30 mL (1 oz). Refer to 49 CFR 173.4 for
specific information in packaging small quantity materials.
Limited Quantity Exceptions [49 CFR 173.150(b)]: Limited quantities for Class 3, Packing Group III materials have inner packagings not over
5.0 L (1.3 gal) net capacity each, packed in strong outer packaging.
TRANSPORT CANADA, TRANSPORTATION OF DANGEROUS GOODS REGULATIONS: This product is classified as
Dangerous Goods, per regulations of Transport Canada. The use of the above U.S. DOT information from the U.S. 49
CFR regulations is allowed for shipments that originate in the U.S. For shipments via ground vehicle or rail that originate in
Canada, the following information is applicable.
UN Identification Number:
Proper Shipping Name:
Hazard Class Number and Description:
Packing Group:
Excepted Quantities:
Special Provisions:
Explosive Limit and Limited Quantity Index:
ERAP Index:
Passenger Carrying Ship Index:
Passenger Carrying Road or Rail Vehicle Index:
UN 1993
Flammable liquid, n.o.s. (Isopropyl Alcohol)
3 (Flammable)
III
E1
16
5
None
None
60
INTERNATIONAL AIR TRANSPORT ASSOCIATION SHIPPING INFORMATION (IATA): This product is classified as
dangerous goods, per the International Air Transport Association.
UN Identification Number:
Proper Shipping Name:
Hazard Class Number and Description:
Hazard Label(s) Required:
UN 1993
Flammable liquid, n.o.s. (Isopropyl Alcohol)
3 (Flammable)
Class 3 (Flammable)
82-0290-01 REV. A
EFFECTIVE DATE: JUNE 13, 2011
PAGE 9 OF 15
14. TRANSPORTATION INFORMATION (Continued)
INTERNATIONAL AIR TRANSPORT ASSOCIATION SHIPPING INFORMATION (IATA) [continued]:
Packing Group:
III
Excepted Quantities:
E1
Passenger and Cargo Aircraft Limited Quantity Packing Instruction: Y344
Passenger and Cargo Aircraft Limited Quantity Maximum Net Quantity/Pkg: 10 L
Passenger and Cargo Aircraft Packing Instruction:
355
Passenger and Cargo Aircraft Maximum Net Quantity/Pkg:
60 L
Cargo Aircraft Only Packing Instruction:
366
Cargo Aircraft Only Maximum Net Quantity/Pkg:
220 L
Special Provisions:
A3
ERG Code:
3L
INTERNATIONAL MARITIME ORGANIZATION SHIPPING INFORMATION (IMO):
dangerous goods, per the International Maritime Organization.
This product is classified as
UN No.:
1993
Proper Shipping Name:
Flammable liquid, n.o.s. (Isopropyl Alcohol)
Hazard Class Number:
3
Packing Group:
III
Limited Quantities:
5L
Excepted Quantities:
E1
Special Provisions:
223, 274, 955
Packing:
Instructions: P001, LP01, Provisions: None
IBCs:
Instructions: IBC03, Provisions: None
Tanks:
Instructions: T4, Provisions: TP1, TP29
EmS:
F-E, S-E
Stowage Category:
Category A.
Marine Pollutant: This product does not meet the criteria of a Marine Pollutant under UN criteria.
EUROPEAN AGREEMENT CONCERNING THE INTERNATIONAL CARRIAGE OF DANGEROUS GOODS BY
ROAD (ADR): This product is classified by the Economic Commission for Europe to be dangerous goods.
UN No.:
Name and Description:
Class:
Classification Code:
Packing Group:
Labels:
Special Provisions:
Limited Quantities:
Excepted Quantities:
Packing Instructions:
Special Packing Provisions:
Mixed Packing Provisions:
Portable Tanks and Bulk Containers:
Hazard Identification No.:
1993
Flammable liquid, n.o.s. (Isopropyl Alcohol)
3
F1
III
3
274, 601, 640E
LQ7
E1
P001, IBC03, LP01, R001
None
MP19
Instructions: T4, Provisions: TP1, TP29
30
TRANSPORT IN BULK ACCORDING TO THE IBC CODE: See the information under the individual jurisdiction listings
for IBC information.
ENVIRONMENTAL HAZARDS: This product does not meet the criteria of environmentally hazardous according to the
criteria of the UN Model Regulations (as reflected in the IMDG Code, ADR, RID, and ADN); components of this product
are not specifically listed in Annex III under MARPOL 73/78.
15. REGULATORY INFORMATION
ADDITIONAL UNITED STATES REGULATIONS:
U.S. SARA REPORTING REQUIREMENTS: The components of this product are subject to the reporting requirements
of Sections 302, 304, and 313 of Title III of the Superfund Amendments and Reauthorization Act, as follows.
CHEMICAL NAME
Glycol Ether (under glycol ether category)
Isopropyl Alcohol (mfg-strong acid process)
SARA 302
(40 CFR 355, Appendix A)
SARA 304
(40 CFR Table 302.4)
SARA 313
(40 CFR 372.65)
No
No
No
No
N230
Yes
U.S. SARA THRESHOLD PLANNING QUANTITY: The components of this product have no specific Threshold Planning
Quantity. The default Federal MSDS submission and inventory requirement filing threshold of 10,000 lbs. (4,540 kg)
therefore applies, per 40 CFR 370.20.
U.S. CERCLA REPORTABLE QUANTITY (RQ): Butyl Ester = 5000 lb (2270 kg); The Glycol Ether component does
not have a specific CERCLA RQ assigned although as part of the generic or broad class of Glycol Ethers, it is a
CERCLA hazardous substance. See 50 Federal Register 13456 (April 4, 1985). Values in section 313 column
represent Category Codes for reporting under Section 313.
82-0290-01 REV. A
EFFECTIVE DATE: JUNE 13, 2011
PAGE 10 OF 15
15. REGULATORY INFORMATION (Continued)
ADDITIONAL UNITED STATES REGULATIONS (continued):
U.S. SARA HAZARD CATEGORIES (SECTION 311/312, 40 CFR 370-21): ACUTE: Yes; CHRONIC: Yes; FIRE: Yes;
REACTIVE: No; SUDDEN RELEASE: No
U.S. TSCA INVENTORY STATUS: The components of this product are listed on the TSCA Inventory.
OTHER U.S. FEDERAL REGULATIONS: Components of this product have requirements under other U.S. Federal
regulations detailed as follows:
BUTYL ESTER
CLEAN WATER ACT REQUIREMENTS: This material is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water
Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of
this substance.
CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT (PROPOSITION 65): This product does
not contain any components listed on the California Proposition 65 Lists.
ADDITIONAL CANADIAN REGULATIONS:
CANADIAN DSL/NDSL INVENTORY STATUS: The components of this product are on the DSL Inventory.
CANADIAN ENVIRONMENTAL PROTECTION ACT (CEPA) PRIORITIES SUBSTANCES LISTS: The Isopropyl
Alcohol component has requirements under the CEPA as follows:
ISOPROPYL ALCOHOL
CEPA Reporting Requirements: Substance With Greatest Potential For Human Exposure Substance on Environment Canada/Health Canada
Pilot Project List (CEPA 1999, Section 73). Meets categorization criteria: *may present, to individuals in Canada, the greatest potential for
exposure; or *are persistent or bio-accumulative in accordance with the regulations, and inherently toxic to human beings or to non-human
organisms, as determined by laboratory or other studies.
CANADIAN WHMIS CLASSIFICATION AND SYMBOLS: This product would be classified as a Controlled Product,
Hazard Classes B2, D2A and D2B as per the Controlled Product Regulations.
ADDITIONAL EUROPEAN REGULATIONS:
SAFETY, HEALTH, AND ENVIRONMENTAL REGULATIONS/LEGISLATION SPECIFIC FOR THE PRODUCT:
Currently, there is no specific legislation pertaining to this product.
CHEMICAL SAFETY ASSESSMENT: No data available. The chemical safety assessment is required for some
substances according to European Union Regulation (EC) 1907/2006, Article 14.
16. OTHER INFORMATION
GLOBAL HARMONIZATION AND EU CLP REGULATION (EC) 1272/2208 LABELING AND CLASSIFICATION: This
product has been classified per GHS Standards, pending further testing. For information on EU classification under
(67/548/EEC), see below.
Classification: Flammable Liquid Category 3, Acute Inhalation Toxicity Category 4, Acute Dermal Toxicity Category 4, Acute Oral
Toxicity Category 4, Eye Irritant Category 2, Skin Irritant Category 2, Specific Target Organ (Central Nervous System, Blood
System) Toxicity (via Inhalation, Ingestion) Single Exposure Category 3
Hazard Statement Codes: H225: Highly flammable liquid and vapour. H332: Harmful if inhaled. H312: Harmful in contact with skin.
H302: Harmful if swallowed. H319: Causes serious eye irritation. H315: Causes skin irritation. H336: May cause drowsiness or
dizziness.
Precautionary Codes:
Prevention: P210: Keep away from heat/sparks/open flames/hot surfaces. — No smoking. P233: Keep container tightly closed.
P240: Ground/bond container and receiving equipment. P241: Use explosion-proof electrical/ventilating/lighting/equipment.
P242: Use only non-sparking tools. P243: Take precautionary measures against static discharge. P261: Avoid breathing
mists, sprays, fume. P264: Wash thoroughly after handling. P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area. P280: Wear protective gloves/protective clothing/eye protection/face
protection.
Response: P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin
with water/shower. P370 + P378: In case of fire: Use materials appropriate for surrounding fire for extinction. P304 + P340: IF
INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON
CENTER or doctor/physician. P302 + P352: IF ON SKIN: Wash with plenty of soap and water. P301 + P312: If swallowed, Call
a POISON CENTER or doctor/physician if you feel unwell. P330: Rinse mouth. P305 + P351 + P338: IF IN EYES: Rinse
cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313:
If eye irritation persists: Get medical advice/attention. P332 + P313: If skin irritation occurs, get medical attention. P321:
Specific treatment (remove from exposure and treat symptoms).
Storage: P403 + P233 + P235: Store in a well-ventilated place. Keep container tightly closed. Keep cool. P405: Store locked
up.
Disposal: P501: Dispose of contents/containers in accordance with all local, regional, national and international regulations.
Signal Word: Warning
Hazard Symbol/Pictograms: GHS02, GHS07
82-0290-01 REV. A
EFFECTIVE DATE: JUNE 13, 2011
PAGE 11 OF 15
16. OTHER INFORMATION (Continued)
EU LABELING AND CLASSIFICATION: This product has been classified as per European Union Council Directive
67/548/EEC or subsequent Directives.
Classification: Highly Flammable, Harmful, Irritant
Risk Phrases: R11: Highly Flammable. R20/21/22: Harmful by inhalation, in contact with skin and if swallowed. R36: Irritating to
eyes. R66: Repeated exposure may cause skin dryness or cracking. R67: Vapours may cause drowsiness and dizziness.
Safety Phrases: S2: Keep locked up. S3/7/9: Keep container tightly closed in a cool, well-ventilated place. S16: Keep away from
sources of ignition - No smoking. S23: Do not breathe gas/fumes/vapour/spray. S24/25: Avoid contact with skin and eyes. S26:
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39: Wear suitable
protective clothing, gloves and eye/face protection. S45: In case of accident or if you feel unwell seek medical advice
immediately (show the label where possible).S46: If swallowed, seek medical advice immediately and show this container or
label.
Hazard Symbols: F, Xn/Xi
REFERENCES AND DATA SOURCES: Contact the supplier for information.
METHODS OF EVALUATING INFORMATION FOR THE PURPOSE OF CLASSIFICATION: Bridging principles were
used to classify this product.
REVISION DETAILS: May 2011: Review and up-date entire MSDS. Revise format to include current ANSI 16 Part
format, Canadian, European and Global Harmonization compliance.
MIXTURES: When two or more chemicals are mixed, their hazardous properties may combine to create additional, unexpected
hazards. Obtain and evaluate the safety information for this product before you use the product. Consult an Industrial Hygienist or
other trained person when you make your safety evaluation of the end product. Remember all chemicals have properties that can
cause serious injury or death.
PREPARED BY:
CHEMICAL SAFETY ASSOCIATES, Inc.
PO Box 1961, Hilo, HI 96721 • (800) 441-3365 • (808) 969-4846
This Material Safety Data Sheet is offered pursuant to OSHA’s Hazard Communication Standard, 29 CFR, 1910.1200. Other government regulations must be reviewed for
applicability to this product. To the best of UVP’s knowledge, the information contained herein is reliable and accurate as of this date; however, accuracy, suitability or
completeness are not guaranteed and no warranties of any type, either express or implied, are provided. The information contained herein relates only to this specific product. If
this product is combined with other materials, all component properties must be considered. Data may be changed from time to time. Be sure to consult the latest edition.
DEFINITION OF TERMS
A large number of abbreviations and acronyms appear on a MSDS. Some of these, which are commonly used, include the following:
CAS #: This is the Chemical Abstract Service Number that uniquely identifies each
constituent.
EXPOSURE LIMITS IN AIR:
15-minute TWA exposure (unless otherwise specified) that shall not be exceeded at any
time during a workday.
NIOSH RELs: NIOSH’s Recommended Exposure Limits.
CEILING LEVEL: The concentration that shall not be exceeded during any part of the
working exposure.
DFG MAK Germ Cell Mutagen Categories: 1: Germ cell mutagens that have been
shown to increase the mutant frequency in the progeny of exposed humans. 2: Germ cell
mutagens that have been shown to increase the mutant frequency in the progeny of
exposed mammals. 3A: Substances that have been shown to induce genetic damage in
germ cells of human of animals, or which produce mutagenic effects in somatic cells of
mammals in vivo and have been shown to reach the germ cells in an active form. 3B:
Substances that are suspected of being germ cell mutagens because of their genotoxic
effects in mammalian somatic cell in vivo; in exceptional cases, substances for which
there are no in vivo data, but that are clearly mutagenic in vitro and structurally related to
known in vivo mutagens. 4: Not applicable (Category 4 carcinogenic substances are
those with non-genotoxic mechanisms of action. By definition, germ cell mutagens are
genotoxic. Therefore, a Category 4 for germ cell mutagens cannot apply. At some time in
the future, it is conceivable that a Category 4 could be established for genotoxic
substances with primary targets other than DNA [e.g. purely aneugenic substances] if
research results make this seem sensible.) 5: Germ cell mutagens, the potency of which
is considered to be so low that, provided the MAK value is observed, their contribution to
genetic risk for humans is expected not to be significant.
DFG MAK Pregnancy Risk Group Classification: Group A: A risk of damage to the
developing embryo or fetus has been unequivocally demonstrated. Exposure of pregnant
women can lead to damage of the developing organism, even when MAK and BAT
(Biological Tolerance Value for Working Materials) values are observed.
DFG MAK Pregnancy Risk Group Classification (continued): Group B: Currently
available information indicates a risk of damage to the developing embryo or fetus must
be considered to be probable. Damage to the developing organism cannot be excluded
when pregnant women are exposed, even when MAK and BAT values are observed.
Group C: There is no reason to fear a risk of damage to the developing embryo or fetus
when MAK and BAT values are observed. Group D: Classification in one of the groups
A–C is not yet possible because, although the data available may indicate a trend, they
are not sufficient for final evaluation.
IDLH: Immediately Dangerous to Life and Health. This level represents a concentration
from which one can escape within 30-minutes without suffering escape-preventing or
permanent injury.
LOQ: Limit of Quantitation.
MAK: Federal Republic of Germany Maximum Concentration Values in the workplace.
NE: Not Established. When no exposure guidelines are established, an entry of NE is
made for reference.
NIC: Notice of Intended Change.
NIOSH CEILING: The exposure that shall not be exceeded during any part of the
workday. If instantaneous monitoring is not feasible, the ceiling shall be assumed as a
82-0290-01 REV. A
EFFECTIVE DATE: JUNE 13, 2011
PAGE 12 OF 15
EXPOSURE LIMITS IN AIR (continued):
PEL: OSHA's Permissible Exposure Limits. This exposure value means exactly the same
as a TLV, except that it is enforceable by OSHA. The OSHA Permissible Exposure
Limits are based in the 1989 PELs and the June, 1993 Air Contaminants Rule (Federal
Register: 58: 35338-35351 and 58: 40191). Both the current PELs and the vacated PELs
are indicated. The phrase, “Vacated 1989 PEL” is placed next to the PEL that was
vacated by Court Order.
SKIN: Used when a there is a danger of cutaneous absorption.
STEL: Short Term Exposure Limit, usually a 15-minute time-weighted average (TWA)
exposure that should not be exceeded at any time during a workday, even if the 8-hr
TWA is within the TLV-TWA, PEL-TWA or REL-TWA.
TLV: Threshold Limit Value. An airborne concentration of a substance that represents
conditions under which it is generally believed that nearly all workers may be repeatedly
exposed without adverse effect. The duration must be considered, including the 8-hour.
TWA: Time Weighted Average exposure concentration for a conventional 8-hr (TLV,
PEL) or up to a 10-hr (REL) workday and a 40-hr workweek.
WEEL: Workplace Environmental Exposure Limits from the AIHA.
HAZARDOUS MATERIALS IDENTIFICATION SYSTEM HAZARD
RATINGS: This rating system was developed by the National Paint and Coating
Association and has been adopted by industry to identify the degree of chemical hazards.
0 Minimal Hazard: No significant health risk, irritation of skin or eyes not anticipated. Skin
Irritation: Essentially non-irritating. Mechanical irritation may occur. PII or Draize = 0. Eye
Irritation: Essentially non-irritating, minimal effects clearing in < 24 hours. Mechanical
irritation may occur. Draize = 0. Oral Toxicity LD50 Rat: > 5000 mg/kg. Dermal Toxicity
LD50 Rat or Rabbit: > 2000 mg/kg. Inhalation Toxicity 4-hrs LC50 Rat: > 20 mg/L. 1 Slight
Hazard: Minor reversible injury may occur; may irritate the stomach if swallowed; may
defat the skin and exacerbate existing dermatitis. Skin Irritation: Slightly or mildly
irritating. PII or Draize > 0 < 5. Eye Irritation: Slightly to mildly irritating, but reversible
within 7 days. Draize > ≤0 25.
Oral Toxicity LD50 Rat: > 500–5000 mg/kg. Dermal
Toxicity LD50 Rat or Rabbit: > 1000–2000 mg/kg. Inhalation Toxicity LC50 4-hrs Rat: > 2–
20 mg/L. 2 Moderate Hazard: Temporary or transitory injury may occur; prolonged
exposure may affect the CNS. Skin Irritation: Moderately irritating; primary irritant;
sensitizer. PII or Draize
≥ 5, with no destruction of dermal tissue.
Eye Irritation:
Moderately to severely irritating; reversible corneal opacity; corneal involvement or
irritation clearing in 8–21 days. Draize = 26–100, with reversible effects. Oral Toxicity
LD50 Rat: > 50–500 mg/kg. Dermal Toxicity LD50 Rat or Rabbit: > 200–1000 mg/kg.
Inhalation Toxicity LC50 4-hrs Rat: > 0.5–2 mg/L. 3 Serious Hazard: Major injury likely
unless prompt action is taken and medical treatment is given; high level of toxicity;
corrosive. Skin Irritation: Severely irritating and/or corrosive; may cause destruction of
dermal tissue, skin burns, and dermal necrosis. PII or Draize > 5–8, with destruction of
tissue. Eye Irritation: Corrosive, irreversible destruction of ocular tissue; corneal
involvement or irritation persisting for more than 21 days. Draize > 80 with effects
irreversible in 21 days. Oral Toxicity LD50 Rat: > 1–50 mg/kg. Dermal Toxicity LD50 Rat or
Rabbit: > 20–200 mg/kg. Inhalation Toxicity LC50 4-hrs Rat: > 0.05–0.5 mg/L.
82-0290-01 REV. A
EFFECTIVE DATE: JUNE 13, 2011
PAGE 13 OF 15
DEFINITION OF TERMS (Continued)
HAZARDOUS MATERIALS
RATINGS (continued):
IDENTIFICATION
SYSTEM
HAZARD
HEALTH HAZARD (continued): 4 Severe Hazard: Life-threatening; major or permanent
damage may result from single or repeated exposures; extremely toxic; irreversible injury
may result from brief contact. Skin Irritation: Not appropriate. Do not rate as a 4, based
on skin irritation alone. Eye Irritation: Not appropriate. Do not rate as a 4, based on eye
irritation alone. Oral Toxicity LD50 Rat: ≤ 1 mg/kg. Dermal Toxicity LD50 Rat or Rabbit: ≤
20 mg/kg. Inhalation Toxicity LC50 4-hrs Rat: ≤ 0.05 mg/L.
FLAMMABILITY HAZARD: 0 Minimal Hazard: Materials that will not burn in air when
exposure to a temperature of 815.5°C (1500°F) for a period of 5 minutes. 1 Slight
Hazard: Materials that must be pre-heated before ignition can occur. Material requires
considerable pre-heating, under all ambient temperature conditions before ignition and
combustion can occur. This usually includes the following: Materials that will burn in air
when exposed to a temperature of 815.5°C (1500°F) for a period of 5 minutes or less;
Liquids, solids and semisolids having a flash point at or above 93.3°C (200°F) (i.e.
OSHA Class IIIB); and Most ordinary combustible materials (e.g. wood, paper, etc.). 2
Moderate Hazard: Materials that must be moderately heated or exposed to relatively high
ambient temperatures before ignition can occur. Materials in this degree would not, under
normal conditions, form hazardous atmospheres in air, but under high ambient
temperatures or moderate heating may release vapor in sufficient quantities to produce
hazardous atmospheres with air. This usually includes the following: Liquids having a
flash-point at or above 37.8°C (100°F); Solid materials in the form of course dusts that
may burn rapidly but that generally do not form explosive atmospheres; Solid materials in
a fibrous or shredded form that may burn rapidly and create flash fire hazards (e.g.
cotton, sisal, hemp); and Solids and semisolids (e.g. viscous and slow flowing as
asphalt) that readily give off flammable vapors. 3 Serious Hazard: Liquids and solids that
can be ignited under almost all ambient temperature conditions. Materials in this degree
produce hazardous atmospheres with air under almost all ambient temperatures, or,
unaffected by ambient temperature, are readily ignited under almost all conditions.
Materials in this degree produce hazardous atmospheres with air under almost all
ambient temperatures, or, unaffected by ambient temperature, are readily ignited under
almost all conditions. This usually includes the following: Liquids having a flash point
below 22.8°C (73°F) and having a boiling point at or above 38°C (100°F) and those
liquids having a flash point at or above 22.8°C (73°F) and below 37.8°C (100°F) (i.e.
OSHA Class IB and IC); Materials that on account of their physical form or environmental
conditions can form explosive mixtures with air and are readily dispersed in air (e.g.,
dusts of combustible solids, mists or droplets of flammable liquids); and Materials that
burn extremely rapidly, usually by reason of self-contained oxygen (e.g. dry nitrocellulose
and many organic peroxides). 4 Severe Hazard: Materials that will rapidly or completely
vaporize at atmospheric pressure and normal ambient temperature or that are readily
dispersed in air, and that will burn readily. This usually includes the following: Flammable
gases; Flammable cryogenic materials; Any liquid or gaseous material that is liquid while
under pressure and has a flash point below 22.8°C (73°F) and a boiling point below
37.8°C (100°F) (i.e. OSHA Class IA); and Materials that ignite spontaneously when
exposed to air at a temperature of 54.4°C (130°F) or below (pyrophoric).
PHYSICAL HAZARD: 0 Water Reactivity: Materials that do not react with water. Organic
Peroxides: Materials that are normally stable, even under fire conditions and will not
react with water. Explosives: Substances that are Non-Explosive. Compressed Gases:
No Rating. Pyrophorics: No Rating. Oxidizers: No 0 rating. Unstable Reactives:
Substances that will not polymerize, decompose, condense, or self-react.). 1 Water
Reactivity: Materials that change or decompose upon exposure to moisture. Organic
Peroxides: Materials that are normally stable, but can become unstable at high
temperatures and pressures. These materials may react with water, but will not release
energy violently. Explosives: Division 1.5 & 1.6 explosives. Substances that are very
insensitive explosives or that do not have a mass explosion hazard. Compressed Gases:
Pressure below OSHA definition. Pyrophorics: No Rating. Oxidizers: Packaging Group III
oxidizers; Solids: any material that in either concentration tested, exhibits a mean burning
time less than or equal to the mean burning time of a 3:7 potassium bromate/cellulose
mixture and the criteria for Packing Group I and II are not met. Liquids: any material that
exhibits a mean pressure rise time less than or equal to the pressure rise time of a 1:1
nitric acid (65%)/cellulose mixture and the criteria for Packing Group I and II are not met.
Unstable Reactives: Substances that may decompose condense, or self-react, but only
under conditions of high temperature and/or pressure and have little or no potential to
cause significant heat generation or explosion hazard. Substances that readily undergo
hazardous polymerization in the absence of inhibitors. Substances that readily undergo
hazardous polymerization in the absence of inhibitors. 2 Water Reactivity: Materials that
may react violently with water. Organic Peroxides: Materials that, in themselves, are
normally unstable and will readily undergo violent chemical change, but will not detonate.
These materials may also react violently with water. Explosives: Division 1.4 explosives.
Explosive substances where the explosive effects are largely confined to the package
and no projection of fragments of appreciable size or range are expected. An external fire
must not cause virtually instantaneous explosion of almost the entire contents of the
package. Compressed Gases: Pressurized and meet OSHA definition but < 514.7 psi
absolute at 21.1°C (70°F) [500 psig]. Pyrophorics: No Rating. Oxidizers: Packing Group II
oxidizers. Solids: any material that, either in concentration tested, exhibits a mean
burning time of less than or equal to the mean burning time of a 2:3 potassium
bromate/cellulose mixture and the criteria for Packing Group I are not met. Liquids: any
material that exhibits a mean pressure rise time less than or equal to the pressure rise of
a 1:1 aqueous sodium chlorate solution (40%)/cellulose mixture and the criteria for
Packing Group I are not met. Reactives: Substances that may polymerize, decompose,
condense, or self-react at ambient temperature and/or pressure, but have a low potential
(or low risk) for significant heat generation or explosion. Substances that readily form
peroxides upon exposure to air or oxygen at room temperature. 3 Water Reactivity:
Materials that may form explosive reactions with water. Organic Peroxides: Materials that
are capable of detonation or explosive reaction, but require a strong initiating source or
must be heated under confinement before initiation; or materials that react explosively
with water. Explosives: Division 1.3 explosives. Explosive substances that have a fire
hazard and either a minor blast hazard or a minor projection hazard or both, but do not
have a mass explosion hazard. Compressed Gases: Pressure ≥ 514.7 psi absolute at
21.1°C (70°F) [500 psig].
HAZARDOUS MATERIALS
RATINGS (continued):
IDENTIFICATION
SYSTEM
HAZARD
PHYSICAL HAZARD (continued): 3 (continued): Pyrophorics: No Rating. Oxidizers:
Packing Group I oxidizers. Solids: any material that, in either concentration tested,
exhibits a mean burning time less than the mean burning time of a 3:2 potassium
bromate/cellulose mixture. Liquids: any material that spontaneously ignites when mixed
with cellulose in a 1:1 ratio, or which exhibits a mean pressure rise time less than the
pressure rise time of a 1:1 perchloric acid (50%)/cellulose mixture. Unstable Reactives:
Substances that may polymerize, decompose, condense, or self-react at ambient
temperature and/or pressure and have a moderate potential (or moderate risk) to cause
significant heat generation or explosion. 4 Water Reactivity: Materials that react
explosively with water without requiring heat or confinement. Organic Peroxides:
Materials that are readily capable of detonation or explosive decomposition at normal
temperature and pressures. Explosives: Division 1.1 & 1.2 explosives. Explosive
substances that have a mass explosion hazard or have a projection hazard. A mass
explosion is one that affects almost the entire load instantaneously. Compressed Gases:
No Rating. Pyrophorics: Add to the definition of Flammability 4. Oxidizers: No 4 rating.
Unstable Reactives: Substances that may polymerize, decompose, condense, or selfreact at ambient temperature and/or pressure and have a high potential (or high risk) to
cause significant heat generation or explosion.
NATIONAL FIRE PROTECTION ASSOCIATION HAZARD RATINGS:
HEALTH HAZARD: 0 Materials that, under emergency conditions, would offer no hazard
beyond that of ordinary combustible materials. Gases and vapors with an LC50 for acute
inhalation toxicity greater than 10,000 ppm. Dusts and mists with an LC50 for acute
inhalation toxicity greater than 200 mg/L. Materials with an LD50 for acute dermal toxicity
greater than 2000 mg/kg. Materials with an LD50 for acute oral toxicity greater than 2000
mg/kg. Materials essentially non-irritating to the respiratory tract, eyes, and skin. 1
Materials that, under emergency conditions, can cause significant irritation. Gases and
vapors with an LC50 for acute inhalation toxicity greater than 5,000 ppm but less than or
equal to 10,000 ppm. Dusts and mists with an LC50 for acute inhalation toxicity greater
than 10 mg/L but less than or equal to 200 mg/L. Materials with an LD50 for acute dermal
toxicity greater than 1000 mg/kg but less than or equal to 2000 mg/kg. Materials that
slightly to moderately irritate the respiratory tract, eyes and skin. Materials with an LD50
for acute oral toxicity greater than 500 mg/kg but less than or equal to 2000 mg/kg. 2
Materials that, under emergency conditions, can cause temporary incapacitation or
residual injury. Gases with an LC50 for acute inhalation toxicity greater than 3,000 ppm
but less than or equal to 5,000 ppm. Any liquid whose saturated vapor concentration at
20°C (68°F) is equal to or greater than one-fifth its LC50 for acute inhalation toxicity, if its
LC50 is less than or equal to 5000 ppm and that does not meet the criteria for either
degree of hazard 3 or degree of hazard 4. Dusts and mists with an LC50 for acute
inhalation toxicity greater than 2 mg/L but less than or equal to 10 mg/L. Materials with
an LD50 for acute dermal toxicity greater than 200 mg/kg but less than or equal to 1000
mg/kg. Compressed liquefied gases with boiling points between -30°C (-22°F) and 55°C (-66.5°F) that cause severe tissue damage, depending on duration of exposure.
Materials that are respiratory irritants. Materials that cause severe, but reversible
irritation to the eyes or are lachrymators. Materials that are primary skin irritants or
sensitizers. Materials whose LD50 for acute oral toxicity is greater than 50 mg/kg but less
than or equal to 500 mg/kg. 3 Materials that, under emergency conditions, can cause
serious or permanent injury. Gases with an LC50 for acute inhalation toxicity greater than
1,000 ppm but less than or equal to 3,000 ppm. Any liquid whose saturated vapor
concentration at 20°C (68°F) is equal to or greater its LC50 for acute inhalation toxicity, if
its LC50 is less than or equal to 3000 ppm and that does not meet the criteria for degree
of hazard 4. Dusts and mists with an LC50 for acute inhalation toxicity greater than 0.5
mg/L but less than or equal to 2 mg/L. Materials with an LD50 for acute dermal toxicity
greater than 40 mg/kg but less than or equal to 200 mg/kg. Materials that are corrosive to
the respiratory tract. Materials that are corrosive to the eyes or cause irreversible corneal
opacity. Materials corrosive to the skin. Cryogenic gases that cause frostbite and
irreversible tissue damage. Compressed liquefied gases with boiling points below -55°C
(-66.5°F) that cause frostbite and irreversible tissue damage. Materials with an LD50 for
acute oral toxicity greater than 5 mg/kg but less than or equal to 50 mg/kg. 4 Materials
that, under emergency conditions, can be lethal. Gases with an LC50 for acute inhalation
toxicity less than or equal to 1,000 ppm. Any liquid whose saturated vapor concentration
at 20°C (68°F) is equal to or greater than ten times its LC50 for acute inhalation toxicity, if
its LC50 is less than or equal to 1000 ppm. Dusts and mists whose LC50 for acute
inhalation toxicity is less than or equal to 0.5 mg/L. Materials whose LD50 for acute
dermal toxicity is less than or equal to 40 mg/kg. Materials whose LD50 for acute oral
toxicity is less than or equal to 5 mg/kg.
FLAMMABILITY HAZARD: 0 Materials that will not burn under typical fire conditions,
including intrinsically noncombustible materials such as concrete, stone, and sand.
Materials that will not burn in air when exposed to a temperature of 816°C (1500°F) for a
period of 5 minutes in according with Annex D of NFPA 704. 1 Materials that must be
preheated before ignition can occur. Materials in this degree require considerable
preheating, under all ambient temperature conditions, before ignition and combustion can
occur: Materials that will burn in air when exposed to a temperature of 816°C (1500°F)
for a period of 5 minutes in according with Annex D of NFPA 704. Liquids, solids, and
semisolids having a flash point at or above 93.4°C (200°F) (i.e. Class IIIB liquids).
Liquids with a flash point greater than 35°C (95°F) that do not sustain combustion when
tested using the Method of Testing for Sustained Combustibility, per 49 CFR 173,
Appendix H or the UN Recommendations on the Transport of Dangerous Goods, Model
Regulations (current edition) and the related Manual of Tests and Criteria (current
edition). Liquids with a flash point greater than 35°C (95°F) in a water-miscible solution
or dispersion with a water non-combustible liquid/solid content of more than 85% by
weight. Liquids that have no fire point when tested by ASTM D 92, Standard Test Method
for Flash and Fire Points by Cleveland Open Cup, up to the boiling point of the liquid or
up to a temperature at which the sample being tested shows an obvious physical change.
Combustible pellets with a representative diameter of greater than 2 mm (10 mesh).
Most ordinary combustible materials. Solids containing greater than 0.5% by weight of a
flammable or combustible solvent are rated by the closed cup flash point of the solvent.
82-0290-01 REV. A
EFFECTIVE DATE: JUNE 13, 2011
PAGE 14 OF 15
DEFINITION OF TERMS (Continued)
NATIONAL FIRE PROTECTION ASSOCIATION HAZARD RATINGS
(continued):
HEALTH HAZARD (continued):
FLAMMABILITY HAZARD: 2 Materials that must be moderately heated or exposed to
relatively high ambient temperatures before ignition can occur. Materials in this degree
would not under normal conditions form hazardous atmospheres with air, but under high
ambient temperatures or under moderate heating could release vapor in sufficient
quantities to produce hazardous atmospheres with air. Liquids having a flash point at or
above 37.8°C (100°F) and below 93.4°C (200°F) (i.e. Class II and Class IIIA liquids.)
Solid materials in the form of powders or coarse dusts of representative diameter
between 420 microns (40 mesh) and 2 mm (10 mesh) that burn rapidly but that generally
do not form explosive mixtures with air. Solid materials in fibrous or shredded form that
burn rapidly and create flash fire hazards, such as cotton, sisal, and hemp. Solids and
semisolids that readily give off flammable vapors. Solids containing greater than 0.5% by
weight of a flammable or combustible solvent are rated by the closed cup flash point of
the solvent. 3 Liquids and solids that can be ignited under almost all ambient temperature
conditions. Materials in this degree produce hazardous atmospheres with air under
almost all ambient temperatures or, though unaffected by ambient temperatures, are
readily ignited under almost all conditions. Liquids having a flash point below 22.8°C
(73°F) and having a boiling point at or above 37.8°C (100°F) and those liquids having a
flash point at or above 22.8°C (73°F) and below 37.8°C (100°F) (i.e. Class IB and IC
liquids). Materials that on account of their physical form or environmental conditions can
form explosive mixtures with air and are readily dispersed in air. Flammable or
combustible dusts with representative diameter less than 420 microns (40 mesh).
Materials that burn with extreme rapidity, usually by reason of self-contained oxygen (e.g.
dry nitrocellulose and many organic peroxides). Solids containing greater than 0.5% by
weight of a flammable or combustible solvent are rated by the closed cup flash point of
the solvent. 4 Materials that will rapidly or completely vaporize at atmospheric pressure
and normal ambient temperature or that are readily dispersed in air and will burn readily.
Flammable gases. Flammable cryogenic materials. Any liquid or gaseous materials that
is liquid while under pressure and has a flash point below 22.8°C (73°F) and a boiling
point below 37.8°C (100°F) (i.e. Class IA liquids). Materials that ignite when exposed to
air, Solids containing greater than 0.5% by weight of a flammable or combustible solvent
are rated by the closed cup flash point of the solvent.
INSTABILITY HAZARD: 0 Materials that in themselves are normally stable, even under
fire conditions. Materials that have an instantaneous power density (product of heat of
reaction and reaction rate) at 250°C (482°F) below 0.01 W/mL. Materials that do not
exhibit an exotherm at temperatures less than or equal to 500°C (932°F) when tested by
differential scanning calorimetry. 1 Materials that in themselves are normally stable, but
that can become unstable at elevated temperatures and pressures. Materials that have
an instantaneous power density (product of heat of reaction and reaction rate) at 250°C
(482°F) at or above 0.01 W/mL and below 10 W/mL. 2 Materials that readily undergo
violent chemical change at elevated temperatures and pressures. Materials that have an
instantaneous power density (product of heat of reaction and reaction rate) at 250°C
(482°F) at or above 10 W/mL and below 100W/mL. 3 Materials that in themselves are
capable of detonation or explosive decomposition or explosive reaction, but that require
a strong initiating source or that must be heated under confinement before initiation.
Materials that have an estimated instantaneous power density (product of heat of
reaction and reaction rate) at 250°C (482°F) at or above 100 W/mL and below 1000
W/mL. Materials that are sensitive to thermal or mechanical shock at elevated
temperatures and pressures. 4 Materials that in themselves are readily capable of
detonation or explosive decomposition or explosive reaction at normal temperatures and
pressures. Materials that are sensitive to localized thermal or mechanical shock at
normal temperatures and pressures. Materials that have an estimated instantaneous
power density (product of heat of reaction and reaction rate) at 250°C (482°F) of 1000
W/mL or greater.
FLAMMABILITY LIMITS IN AIR:
Much of the information related to fire and explosion is derived from the National Fire
Protection Association (NFPA). Flash Point: Minimum temperature at which a liquid gives
off sufficient vapor to form an ignitable mixture with air near the surface of the liquid or
within the test vessel used. Autoignition Temperature: Minimum temperature of a solid,
liquid, or gas required to initiate or cause self-sustained combustion in air with no other
source of ignition. LEL: Lowest concentration of a flammable vapor or gas/air mixture that
will ignite and burn with a flame. UEL: Highest concentration of a flammable vapor or
gas/air mixture that will ignite and burn with a flame.
TOXICOLOGICAL INFORMATION:
Human and Animal Toxicology: Possible health hazards as derived from human data,
animal studies, or from the results of studies with similar compounds are presented. LD50:
Lethal Dose (solids & liquids) that kills 50% of the exposed animals. LC50: Lethal
Concentration (gases) that kills 50% of the exposed animals. ppm: Concentration
expressed in parts of material per million parts of air or water. mg/m3: Concentration
expressed in weight of substance per volume of air. mg/kg: Quantity of material, by
weight, administered to a test subject, based on their body weight in kg. TDLo: Lowest
dose to cause a symptom. TCLo: Lowest concentration to cause a symptom. TDo, LDLo,
and LDo, or TC, TCo, LCLo, and LCo: Lowest dose (or concentration) to cause lethal or
toxic effects. Cancer Information: IARC: International Agency for Research on Cancer.
NTP: National Toxicology Program. RTECS: Registry of Toxic Effects of Chemical
Substances. IARC and NTP rate chemicals on a scale of decreasing potential to cause
human cancer with rankings from 1 to 4. Subrankings (2A, 2B, etc.) are also used. Other
Information: BEI: ACGIH Biological Exposure Indices, represent the levels of
determinants which are most likely to be observed in specimens collected from a healthy
worker who has been exposed to chemicals to the same extent as a worker with
inhalation exposure to the TLV.
REPRODUCTIVE TOXICITY INFORMATION:
A mutagen is a chemical which causes permanent changes to genetic material (DNA) such
that the changes will propagate through generation lines. An embryotoxin is a chemical which
causes damage to a developing embryo (i.e. within the first eight weeks of pregnancy in
humans), but the damage does not propagate across generational lines. A teratogen is a
chemical which causes damage to a developing fetus, but the damage does not propagate
across generational lines. A reproductive toxin is any substance which interferes in any way
with the reproductive process.
ECOLOGICAL INFORMATION:
EC: Effect concentration in water. BCF: Bioconcentration Factor, which is used to
determine if a substance will concentrate in life forms that consume contaminated plant
or animal matter. TLm: Median threshold limit. log KOW or log KOC: Coefficient of
Oil/Water Distribution is used to assess a substance’s behavior in the environment.
REGULATORY INFORMATION:
U.S.:
EPA: U.S. Environmental Protection Agency. ACGIH: American Conference of
Governmental Industrial Hygienists, a professional association that establishes exposure
limits. OSHA: U.S. Occupational Safety and Health Administration. NIOSH: National
Institute of Occupational Safety and Health, which is the research arm of OSHA. DOT:
U.S. Department of Transportation. TC: Transport Canada. SARA: Superfund
Amendments and Reauthorization Act. TSCA: U.S. Toxic Substance Control Act.
CERCLA: Comprehensive Environmental Response, Compensation, and Liability Act.
Marine Pollutant status according to the DOT; CERCLA or Superfund; and various state
regulations. This section also includes information on the precautionary warnings that
appear on the material’s package label.
CANADA:
WHMIS: Canadian Workplace Hazardous Materials Information System. TC: Transport
Canada. DSL/NDSL: Canadian Domestic/Non-Domestic Substances List.
82-0290-01 REV. A
EFFECTIVE DATE: JUNE 13, 2011
PAGE 15 OF 15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement