M-system B5VS Instruction manual

Below you will find brief information for Signal Transmitter B5VS. The Signal Transmitter B5VS is a device specifically designed for transmitting signals. It features a compact DIN rail mount design for easy installation and includes a range of features for calibration and maintenance.

PDF Download
Document
Signal Transmitter B5VS Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • DIN rail mount
  • Signal transmission
  • Zero and Span adjustment
  • Calibration
  • Warm up time
  • Output signal monitoring
  • Environmental temperature
  • Input voltage
  • Load resistance
  • Output signal

Frequently asked questions

To mount the unit, hang the upper hook at the rear side of the unit on the DIN rail, then push in the lower part while keeping pressing the unit to the DIN rail.

You can adjust the output signal using zero and span adjustments. Apply 0% input and adjust the output to 0% for the zero adjustment. Then apply 100% input and adjust the output to 100% for the span adjustment. Finally, check the zero adjustment again with 0% input.

The unit is designed to function as soon as power is supplied, however, a warm-up time of 10 minutes is required for satisfying complete performance described in the data sheet.
Preparing document for printing…
0%