Mixed Signal Oscilloscopes MSO2000B Series, DPO2000B Series Datasheet

Mixed Signal Oscilloscopes MSO2000B Series, DPO2000B Series Datasheet
Mixed Signal Oscilloscopes
MSO2000B Series, DPO2000B Series Datasheet
Small footprint and lightweight - only 5.3 in. (134 mm) deep and 7 lb.
14 oz. (3.6 kg)
Five-year warranty
Connectivity
USB 2.0 host port on the front panel for quick and easy data storage
USB 2.0 device port on rear panel for easy connection to a PC or direct
®
printing to a PictBridge -compatible printer
Optional 10/100 Ethernet port for network connection and video-out
port to export the oscilloscope display to a monitor or projector
Optional serial triggering and analysis
Offering up to 200 MHz bandwidth and 1 GS/s sample rate, the MSO/
DPO2000B Mixed Signal Oscilloscope Series from Tektronix delivers
advanced debug features at an entry-level price. Quickly find and diagnose
problems in complex designs with up to 20 channels for analyzing analog
and digital signals. With a deep record length of 1 Mpoints standard on all
channels, the MSO/DPO2000B lets you capture long windows of signal
activity while maintaining fine timing resolution.
Key performance specifications
Automated serial triggering, decode, and search options for I2C, SPI,
CAN, LIN, and RS-232/422/485/UART
Feature-rich tools for debugging mixed
signal designs
Simplify and speed up debugging your complex design with feature-rich
®
tools including Wave Inspector controls for rapid waveform navigation and
automated serial and parallel bus analysis.
200, 100, 70 MHz bandwidth models
2 and 4 analog channel models
16 digital channels (MSO series)
1 GS/s sample rate on all channels
1 megapoint record length on all channels
5,000 wfm/s maximum waveform capture rate
Suite of advanced triggers
Key features
®
Wave Inspector controls provide easy navigation and automated
search of waveform data
FilterVu™ variable low-pass filter allows for removal of unwanted signal
noise while still capturing high-frequency events
29 automated measurements, and FFT analysis for simplified
waveform analysis
®
TekVPI probe interface supports active, differential, and current
probes for automatic scaling and units
Comprehensive features speed every stage
of debug
The MSO/DPO2000B Series offers a robust set of features to speed every
stage of debugging your design - from quickly discovering an anomaly and
capturing it, to searching your waveform record for the event and analyzing
its characteristics and your device's behavior.
Discover
To debug a design problem, first you must know it exists. Every design
engineer spends time looking for problems in their design, a timeconsuming and frustrating task without the right debug tools.
The MSO/DPO2000B Series offers complete visualization of signals,
providing fast insight into the real operation of your device. A waveform
capture rate of 5,000 waveforms per second enables you to see glitches
and other infrequent transients quickly, revealing the true nature of device
faults. A digital phosphor display with intensity grading shows the history of
a signal's activity by intensifying areas of the signal that occur more
frequently, providing a visual display of just how often anomalies occur.
7 in. (180 mm) wide-screen TFT-LCD color display
www.tektronix.com 1
Datasheet
Search
Finding your event of interest in a long waveform record can be time
consuming without the right search tools. With today's record lengths
pushing to a million data points, locating your event can mean scrolling
through thousands of screens of signal activity.
Discover - A waveform capture rate of 5,000 wfm/s maximizes the probability of capturing
elusive glitches and other infrequent events.
Capture
The MSO/DPO2000B Series offers the industry's most comprehensive
®
search and waveform navigation with its innovative Wave Inspector
controls. These controls speed panning and zooming through your record.
A unique force-feedback system lets you move from one end of your record
to the other in just seconds. You can mark any location you may want to
reference later for further investigation, and automatically search the record
using criteria that you define. Wave Inspector will instantly search your
entire record, including analog, digital, and serial bus data. Along the way, it
will automatically mark every occurrence of your defined event so you can
quickly move between events.
Discovering a device fault is only the first step. Next, you must capture the
event of interest to identify root cause.
The MSO/DPO2000B Series provides a complete set of triggers - including
runt, logic, pulse width/glitch, setup/hold violation, serial packet, and
parallel data - to help quickly find your event. With up to a 1 Mpoint record
length, you can capture many events of interest, even thousands of serial
packets, in a single acquisition for further analysis while maintaining high
resolution to zoom in on fine signal details.
From triggering on specific packet content to automatic decode in multiple
data formats, the MSO/DPO2000B Series provides integrated support for a
broad range of serial buses - I2C, SPI, CAN, LIN, and RS-232/422/485/
UART. The ability to decode up to two serial and/or parallel buses
simultaneously means you gain insight into system-level problems quickly.
To further help troubleshoot system-level interactions in complex
embedded systems, the MSO2000B Series offers 16 digital channels in
addition to its analog channels. Since the digital channels are fully
integrated into the oscilloscope, you can trigger across all input channels,
automatically time-correlating all analog, digital, and serial signals.
Search - I 2C decode showing results from a Wave Inspector search for Address value
50. Wave Inspector controls provide unprecedented efficiency in viewing and navigating
waveform data.
Analyze
Verifying that your prototype's performance matches simulations and meets
the project's design goals requires analyzing its behavior. Tasks can range
from simple checks of rise times and pulse widths to sophisticated power
loss analysis and investigation of noise sources.
The MSO/DPO2000B Series offers a comprehensive set of integrated
analysis tools including waveform- and screen-based cursors,
29 automated measurements, and FFT analysis. Specialized application
support for serial bus analysis is also available.
Capture - Triggering on a specific transmit data packet going across an RS-232 bus. A
complete set of triggers, including triggers for specific serial packet content, ensures you
quickly capture your event of interest.
Analyze - FFT analysis of a pulsed signal. A comprehensive set of integrated analysis
tools speeds verification of your design's performance.
2 www.tektronix.com
MSO/DPO2000B Series Mixed Signal Oscilloscope
Wave Inspector® navigation and search
User marks
A 1 M point record length represents thousands of screens of information.
The MSO/DPO2000B Series enables you to search through it all and find
your event in seconds with Wave Inspector, the industry's best tool for
navigation and search.
Press the Set Mark front-panel button to place one or more marks on the
waveform. Navigating between marks is as simple as pressing the
Previous (←) and Next (→) buttons on the front panel.
Wave Inspector offers the following innovative controls:
Zoom/pan
A dedicated, two-tier front-panel control provides intuitive control of both
zooming and panning. The inner control adjusts the zoom factor (or zoom
scale); turning it clockwise activates zoom and goes to progressively higher
zoom factors, while turning it counterclockwise results in lower zoom
factors and eventually turning zoom off. No longer do you need to navigate
through multiple menus to adjust your zoom view. The outer control pans
the zoom box across the waveform to quickly get to the portion of waveform
you are interested in. The outer control also utilizes force-feedback to
determine how fast to pan on the waveform. The farther you turn the outer
control, the faster the zoom box moves. Pan direction is changed by simply
turning the control the other way.
Search marks
The Search button allows you to automatically search through your long
acquisition looking for user-defined events. All occurrences of the event are
highlighted with search marks and are easily navigated to, using the frontpanel Previous (←) and Next (→) buttons. Search types include edge,
pulse width/glitch, runt, logic, setup and hold, rise/fall time parallel bus, and
I2C, SPI, CAN, LIN, and RS-232/422/485/UART packet content.
Play/pause
A dedicated play/pause front-panel button scrolls the waveform across the
display automatically while you look for anomalies or an event of interest.
Playback speed and direction are controlled using the intuitive pan control.
Once again, turning the control further makes the waveform scroll faster
and changing direction is as simple as turning the control the other way.
Search step 1: You define what you would like to find.
Search step 2: Wave Inspector automatically searches through the record and marks
each event with a hollow white triangle. You can then use the Previous and Next
buttons to jump from one event to the next.
Wave Inspector controls provide unprecedented efficiency in viewing, navigating, and
analyzing waveform data. Zip through your 1 Mpoint record by turning the outer pan
control (1). Get from the beginning to end in seconds. See something of interest and
want to see more details? Just turn the inner zoom control (2).
www.tektronix.com 3
Datasheet
Digital phosphor technology
Color-coded digital waveform display
The MSO/DPO2000B Series' digital phosphor technology provides you with
fast insight into the real operation of your device. Its waveform capture rate
of 5,000 wfm/s gives you a high probability of quickly seeing the infrequent
problems common in digital systems: runt pulses, glitches, timing issues,
and more.
The MSO2000B Series has redefined the way you view digital waveforms.
One common problem shared by both logic analyzers and mixed-signal
oscilloscopes is determining if data is a one or a zero when zoomed in far
enough that the digital trace stays flat all the way across the display. The
MSO2000B Series has color-coded digital traces, displaying ones in green
and zeros in blue.
Waveforms are superimposed with one another and waveform points that
occur more frequently are intensified. This quickly highlights the events that
over time occur more often or, in the case of infrequent anomalies, occur
less often.
With the MSO/DPO2000B Series, you can choose infinite persistence or
variable persistence, determining how long the previous waveform
acquisitions stay on-screen. This allows you to determine how often an
anomaly is occurring.
With the color-coded digital waveform display, groups are created by simply placing
digital channels together on the screen, allowing the digital channels to be moved as a
group. You can set threshold values for each pod of eight channels, enabling support for
up to two different logic families.
Digital phosphor technology enables a 5,000 wfm/s waveform capture rate and real-time
intensity grading on the MSO/DPO2000B Series.
Mixed signal design and analysis (MSO
series)
The MSO2000B Series Mixed Signal Oscilloscopes provide 16 digital
channels. These channels are tightly integrated into the oscilloscope's user
interface, simplifying operation and making it possible to solve mixed-signal
issues easily.
White edges indicate additional information is available by acquiring at a higher sample
rate.
The multiple transition detection hardware of the MSO2000B Series will
show you a white edge on the display when the system detects multiple
transitions. This acts as a visual reminder that increasing the sample rate
on the next acquisition will reveal higher frequency information than your
previous settings could acquire.
The MSO2000B Series simplifies channel setup by allowing you to group
digital waveforms and enter waveform labels by using a USB keyboard. By
simply placing digital waveforms next to each other, they form a group.
Once a group is formed, you can position all the channels contained in that
group collectively. This greatly reduces the normal setup time associated
with positioning channels individually.
The MSO Series provides 16 integrated digital channels enabling you to view and
analyze time-correlated analog and digital signals.
4 www.tektronix.com
MSO/DPO2000B Series Mixed Signal Oscilloscope
P6316 MSO probe
This unique probe design offers two eight-channel pods, simplifying the
process of connecting to the device-under-test. When connecting to square
pins, the P6316 can connect directly to 8×2 square pin headers spaced on
tenth-inch centers. When more attachment flexibility is required, you can
use the included flying lead sets and grabbers to clip onto surface mount
devices or test points. The P6316 offers outstanding electrical
characteristics applying only 8 pF of capacitive loading with 101 kΩ input
impedance.
Output of DAC Signal - Notice how FilterVu™ clearly shows the noise-free steps of the
DAC in the foreground trace (yellow) which has removed all frequencies above 5.5 kHz.
FilterVu also captures and displays high-frequency glitches up to the full bandwidth of the
oscilloscope in the background trace (orange).
Serial triggering and analysis (optional)
The P6316 MSO probe offers two eight-channel pods to simplify connecting to your
device.
FilterVu™ variable low-pass filter
Tired of being limited to a 20 MHz bandwidth filter in your oscilloscope?
Simply turn on FilterVu and adjust the variable low-pass noise filter. Unlike
other variable low-pass filters, FilterVu filters out the unwanted noise from
your signal while still capturing glitches and other signal details up to the full
bandwidth of the oscilloscope. It does this by showing two waveforms: a
waveform that can be filtered (foreground waveform) and a glitch capture
waveform (background waveform).
On a serial bus, a single signal often includes address, control, data, and
clock information. This can make isolating events of interest difficult.
Automatic trigger, decode, and search on bus events and conditions gives
you a robust set of tools for debugging serial buses. The optional serial
protocol triggering and analysis functionality is offered free for a 30-day trial
period. This free trial period starts automatically when the instrument is
powered on for the first time.
Serial triggering
Trigger on packet content such as start of packet, specific addresses,
specific data content, unique identifiers, etc. on popular serial interfaces
such as I2C, SPI, CAN, LIN, and RS-232/422/485/UART.
The filtered waveform uses a variable low-pass filter to block out noise,
yielding a cleaner waveform to more precisely locate signal edges and
amplitude levels. The result is improved confidence in you cursor
measurements and cleaner documentation of important signal attributes.
When the noise filter is adjusted to the lowest available noise-cutoff
frequency, no more than 1% of high-frequency content that could cause the
oscilloscope to alias will pass through the filter.
The glitch capture waveform shows signal details up to the full bandwidth of
the oscilloscope. The oscilloscope captures pulses as narrow as 5 ns,
using peak-detect min/max sampling, protecting you from missing
unexpected glitches or other high-frequency events.
FilterVu is ideal for repetitive, nonrepetitive, and single-shot events.
Triggering on a specific data packet going across an I 2 C bus. The yellow waveform is
clock and the blue waveform is data. A bus waveform provides decoded packet content
including Start, Address, Read/Write, Data, and Stop.
Bus display
Provides a higher-level, combined view of the individual signals (clock,
data, chip enable, etc.) that make up your bus, making it easy to identify
where packets begin and end and identifying subpacket components such
as address, data, identifier, CRC, etc.
www.tektronix.com 5
Datasheet
Bus decoding
Designed to make your work easier
Tired of having to visually inspect the waveform to count clocks, determine
if each bit is a 1 or a 0, combine bits into bytes, and determine the hex
value? Let the oscilloscope do it for you! Once you've set up a bus, the
MSO/DPO2000B Series will decode each packet on the bus, and display
the value in hex, binary, decimal (LIN only), or ASCII (RS-232/422/485/
UART only) in the bus waveform.
The MSO/DPO2000B is designed to make your work easier. The bright,
widescreen display shows a long time window. Dedicated front-panel
controls simplify operation. A USB host port on the front panel allows you to
easily transfer screenshots, instrument settings, and waveform data to a
USB flash drive.
Event table
In addition to seeing decoded packet data on the bus waveform itself, you
can view all captured packets in a tabular view much like you would see in
a software listing. Packets are time stamped and listed consecutively with
columns for each component (Address, Data, etc.).
Event table showing decoded Identifier, DLC, DATA, and CRC for every CAN packet in a
long acquisition.
Bright, widescreen display
Search
The MSO/DPO2000B Series features a 7 inch (180 mm) widescreen, TFTLCD display for seeing intricate signal details.
Serial triggering is very useful for isolating the event of interest, but once
you've captured it and need to analyze the surrounding data, what do you
do? In the past, users had to manually scroll through the waveform
counting and converting bits and looking for what caused the event. With
the MSO/DPO2000B Series, you can have the oscilloscope automatically
search through the acquired data for user-defined criteria including serial
packet content. Each occurrence is highlighted by a search mark. Rapid
navigation between marks is as simple as pressing the Previous (←) and
Next (→) buttons on the front panel.
Dedicated front-panel controls
Per-channel vertical controls provide simple and intuitive operation. No
longer do you need to share one set of vertical controls across all four
channels.
Connectivity
A USB host port on the front panel enables easy transfer of screenshots,
instrument settings, and waveform data to a USB thumb drive. The rear
panel contains a USB device port for controlling the oscilloscope remotely
from a PC or for connecting a USB keyboard. The USB device port can
®
also be used to print directly to a PictBridge -compatible printer. An
optional 10/100 Ethernet port enables easy connection to networks and an
optional Video Out port allows the oscilloscope display to be exported to an
external monitor or projector.
Compact form factor
A compact, portable form factor allows the MSO/DPO2000B Series to be
easily moved between labs and, with a depth of just 5.3 inches (134 mm), it
saves you valuable space on your test bench.
6 www.tektronix.com
MSO/DPO2000B Series Mixed Signal Oscilloscope
Extended analysis
Acquiring data and measurements from the MSO/DPO2000B Series is as
simple as connecting a USB cable from the oscilloscope to your PC. Key
®
software applications - OpenChoice Desktop, and Microsoft Excel and
Word toolbars - are included standard with each oscilloscope to enable fast
and easy direct communication with your Windows PC.
For simple tasks, the included OpenChoice Desktop enables fast and easy
communication between the oscilloscope and your PC through USB, GPIB,
or LAN for transferring settings, waveforms, and screen images.
The MSO/DPO2000B Series' compact form factor frees up valuable space on your bench
or desktop.
TekVPI® probe interface
The TekVPI probe interface sets the standard for ease of use in probing.
TekVPI probes feature status indicators and controls, as well as a probe
menu button right on the comp box itself. This button brings up a probe
menu on the oscilloscope display with all relevant settings and controls for
the probe. TekVPI probes can be controlled remotely through USB, GPIB,
or Ethernet, enabling more versatile solutions in ATE environments.
®
OpenChoice Desktop software enables seamless connection between the oscilloscope
and your PC.
TekVPI probe interface simplifies connecting your probes to the oscilloscope.
www.tektronix.com 7
Datasheet
Specifications
All specifications apply to all models unless noted otherwise.
Model overview
MSO2002B and
DPO2002B
MSO2004B and
DPO2004B
MSO2012B and
DPO2012B
MSO2014B and
DPO2014B
MSO2022B and
DPO2022B
MSO2024B and
DPO2024B
Analog channels
2
4
2
4
2
4
Bandwidth
70 MHz
70 MHz
100 MHz
100 MHz
200 MHz
200 MHz
Rise time
5 ns
5 ns
3.5 ns
3.5 ns
2.1 ns
2.1 ns
Sample rate
1 GS/s
1 GS/s
1 GS/s
1 GS/s
1 GS/s
1 GS/s
Record length
1 M points
1 M points
1 M points
1 M points
1 M points
1 M points
Digital channels
MSO models - add 16 digital channels to the corresponding DPO model
1
Vertical system analog channels
Hardware bandwidth limits
20 MHz
Input coupling
AC, DC, GND
Input impedance
1 MΩ ±2%, 11.5 pF ±2 pF
Input sensitivity range
2 mV/div to 5 V/div
Vertical resolution
8 bits
Maximum input voltage, 1 MΩ
300 VRMS with peaks ≤ ±450 V
DC gain accuracy (with offset set
to 0 V)
±3% for 10 mV/div to 5 V/div
Channel-to-channel isolation
(Any two channels at equal vertical scale)
Offset range
±4% for 2 mV/div to 5 mV/div
MSO2002B, DPO2002B, MSO2004B,
DPO2004B
MSO2012B, DPO2012B, MSO2014B,
DPO2014B
MSO2022B, DPO2022B, MSO2024B,
DPO2024B
≥100:1 at ≤70 MHz
≥100:1 at ≤100 MHz
100:1 at ≤200 MHz
Volts/div setting
Offset range
1 MΩ input
1
Bandwidth is 20 MHz at 2 mV/div, all models.
8 www.tektronix.com
2 mV/div to 200 mV/div
±1 V
>200 mV/div to 5 V/div
±25V
MSO/DPO2000B Series Mixed Signal Oscilloscope
Vertical system digital channels
Input channels
16 digital (D15 to D0)
Thresholds
Threshold per set of 8 channels
Threshold selections
TTL, CMOS, ECL, PECL, User-defined
User-defined threshold range
± 20 V
Threshold accuracy
±[100 mV + 3% of threshold setting]
Maximum input voltage
± 40 V
Input dynamic range
80 Vpk-pk (threshold setting dependent)
Minimum voltage swing
500 mVp-p
Input resistance
101 kΩ
Probe loading
8 pF
Vertical resolution
1 bit
Horizontal system analog channels
Maximum duration of time
captured at highest sample rate
(all channels)
1 ms
Time base range
200 MHz models: 2ns to 100s
70, 100 MHz models: 4ns to 100s
Time-base delay time range
-10 divisions to 5000 s
Channel-to-channel deskew range
±100 ns
Time base accuracy
±25 ppm over any ≥1 ms interval
Horizontal system digital channels
Maximum sample rate (main)
When using any of channels D7 - D0
When using any of channels D8 - D15
1 GS/s (1 ns resolution)
500 MS/s (2 ns resolution)
Maximum record length (main, all
channels)
1 M points
Minimum detectible pulse width
5 ns
Channel-to-channel skew
2 ns typical
www.tektronix.com 9
Datasheet
Trigger system
Trigger modes
Auto, Normal, and Single
Trigger coupling
DC, HF reject (attenuates >85 kHz), LF reject (attenuates <65 kHz), noise reject (reduces sensitivity)
Trigger holdoff range
20 ns to 8 s
Trigger sensitivity, typical
Trigger source
Sensitivity
Internal DC coupled
0.4 div from DC to 50 MHz
0.6 div > 50 MHz to 100 MHz
0.8 div > 100 MHz to 200 MHz
External (aux input)
200 mV from DC to 100 MHz, 1X attenuation
Trigger level ranges
Any input channel
±4.92 divisions from center of screen
Aux Input (external trigger)
±6.25 V, 1X attenuation
±12.5 V, 10X attenuation
Trigger types
Edge
Positive or negative slope on any channel or front-panel auxiliary input. Coupling includes DC, AC, HF reject, LF reject, and noise
reject.
Pulse Width
Trigger on width of positive or negative pulses that are >, <, =, ≠, or inside/outside a specified period of time.
Runt
Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
Logic
Trigger when any logical pattern of channels goes false or stays true for specified period of time. Any input can be used as a clock
to look for the pattern on a clock edge. Pattern (AND, NAND) specified for all input channels defined as High, Low, or Don’t Care.
Setup and Hold
Trigger on violations of both setup time and hold time between clock and data present on any of the analog and digital input
channels.
Rise/Fall Time
Trigger on pulse edge rates that are faster or slower than specified. Slope may be positive, negative, or either.
Video
Trigger on all lines, odd, even, or all fields on NTSC, PAL, and SECAM video signals.
I2C
Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Address and Data on I2C buses up to 3.4 Mb/
s.
(optional)
SPI (optional)
Trigger on SS, MOSI, MISO, or MOSI and MISO on SPI buses up to 10.0 Mb/s.
RS-232/422/485/UART
(optional)
Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx Data, Rx Data, Tx Parity Error, and Rx Parity Error up
to 10 Mb/s.
CAN (optional)
Trigger on Start of Frame, Frame Type (data, remote, error, overload), Identifier (standard or extended), Data, Identifier and Data,
End of Frame, Missing ACK, or Bit Stuffing Error on CAN signals up to 1 Mb/s. Data can be further specified to trigger on ≤, <, =,
>, ≥, or ≠ a specific data value. User-adjustable sample point is set to 50% by default.
LIN (optional)
Trigger on Sync, Identifier, Data, Identifier and Data, Wakeup Frame, Sleep Frame, Errors such as Sync, Parity, or Checksum
Errors.
Parallel (available on MSO
models only)
Trigger on a parallel bus data value.
10 www.tektronix.com
MSO/DPO2000B Series Mixed Signal Oscilloscope
Acquisition system
Acquisition Modes
Sample
Acquire sampled values.
Peak Detect
Captures glitches as narrow as 3.5 ns at all sweep speeds.
Averaging
From 2 to 512 waveforms included in average.
Roll
Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 40 ms/div.
Waveform measurements
Cursors
Waveform and Screen.
Automatic measurements
29, of which up to four can be displayed on-screen at any one time. Measurements include: Period, Frequency, Delay, Rise Time,
Fall Time, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Phase, Positive
Overshoot, Negative Overshoot, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle RMS, Positive
Pulse Count, Negative Pulse Count, Rising Edge Count, Falling Edge Count, Area and Cycle Area.
Gating
Isolate the specific occurrence within an acquisition to take measurements on, using either the screen, or waveform cursors.
Waveform math
Arithmetic
Add, subtract, and multiply waveforms.
FFT
Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or
Blackman-Harris.
Software
OpenChoice® Desktop
Enables fast and easy communication between a Windows PC and your oscilloscope using USB or LAN. Transfer and save
settings, waveforms, measurements, and screen images. Included Word and Excel toolbars automate the transfer of acquisition
data and screen images from the oscilloscope into Word and Excel for quick reporting or further analysis.
IVI driver
Provides a standard instrument programming interface for common applications such as LabVIEW, LabWindows/CVI,
Microsoft .NET, and MATLAB.
e*Scope® Web-based remote
control
Enables control of the oscilloscope over a network connection through a standard web browser. Simply enter the IP address or
network name of the oscilloscope and a web page will be served to the browser.
Display system
Display type
7 inch (180 mm) wide format liquid crystal TFT color display.
Display resolution
480 horizontal × 234 vertical pixels (WQVGA).
Waveform styles
Vectors, Dots, Variable Persistence, Infinite Persistence.
Graticules
Full, Grid, Cross Hair, Frame.
Format
YT and XY.
Maximum waveform capture rate
Up to 5,000 wfm/s.
www.tektronix.com 11
Datasheet
Input/output ports
USB 2.0 high-speed host port
Supports USB mass storage devices, printers, and keyboards. One port available on rear panel and one on front panel.
USB 2.0 high-speed device port
Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB with a TEK-USB-488, and direct
printing to all PictBridge®-compatible printers.
LAN port (Ethernet)
RJ-45 connector, supports 10/100BASE-T (requires DPO2CONN).
Video out port
DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector (requires DPO2CONN).
Auxiliary input
Front-panel BNC connector. Input Impedance 1 MΩ ±2%. Max input 300 VRMS CAT II with peaks ≤ ±450 V.
Probe compensator output voltage Front-panel pins
and frequency
Amplitude
5V
Frequency
1 kHz
Kensington-style lock
Rear-panel security slot connects to standard Kensington-style lock.
Power source
Power source voltage
100 to 240 V ±10%
Power source frequency
45 to 65 Hz (90 to 264 V)
360 to 440 Hz (100 to 132 V)
Power consumption
80 W maximum
Optional TekVPI® external power
supply 2
Output voltage
12 V
Output current
5A
Power consumption
50 W
Physical characteristics
Dimensions
mm
in.
Height
180
7.1
Width
377
14.9
Depth
134
5.3
kg
lb.
Net
3.6
7.9
Shipping
6.2
13.7
Weight
2
Rackmount configuration
4U
Cooling clearance
2 in. (50 mm) required on left side and rear of instrument
Required when total oscilloscope probe power usage exceeds 20 W.
12 www.tektronix.com
MSO/DPO2000B Series Mixed Signal Oscilloscope
EMC, environment, and safety
Temperature
Operating
0 ºC to +50 ºC (+32 ºF to 122 ºF)
Nonoperating
-40 ºC to +71 ºC (-40 ºF to 160 ºF)
Humidity
Operating
High: 30 ºC to 50 ºC, 5% to 60% relative humidity
Low: 0 ºC to 30 ºC, 5% to 95% relative humidity
Nonoperating
High: 30 ºC to 55 ºC, 5%to 60% relative humidity
Low: 0 ºC to 30 ºC, 5% to 95% relative humidity
Altitude
Operating
3,000 meters (9,843 feet)
Nonoperating
12,000 meters (39,370 feet)
Random vibration
Operating
0.31 GRMS from 5 to 500 Hz, 10 minutes each axis, 3 axes, 30 minutes total
Nonoperating
2.46 GRMS from 5 to 500 Hz, 10 minutes each axis, 3 axes, 30 minutes total
Regulatory
Electromagnetic compatibility
EC Council Directive 2004/108/EC
Safety
UL61010-1:2004; CAN/CSA-C22.2 No. 61010.1: 2004; EN61010-1:2001; complies with the Low Voltage Directive 2004/108/EC for
Product Safety.
www.tektronix.com 13
Datasheet
Ordering information
MSO/DPO2000B family
DPO2002B
70 MHz, 1 GS/s, 1 M record length, 2-channel digital phosphor oscilloscope
DPO2004B
70 MHz, 1 GS/s, 1 M record length, 4-channel digital phosphor oscilloscope
DPO2012B
100 MHz, 1 GS/s, 1 M record length, 2-channel digital phosphor oscilloscope
DPO2014B
100 MHz, 1 GS/s, 1 M record length, 4-channel digital phosphor oscilloscope
DPO2022B
200 MHz, 1GS/s, 1 M record length, 2-channel digital phosphor oscilloscope
DPO2024B
200 MHz, 1 GS/s, 1 M record length, 4-channel digital phosphor oscilloscope
MSO2002B
70 MHz, 1 GS/s, 1 M record length, 2+16 channel mixed-signal oscilloscope
MSO2004B
70 MHz, 1 GS/s, 1M record length, 4+16 channel mixed-signal oscilloscope
MSO2012B
100 MHz, 1 GS/s, 1M record length, 2+16 channel mixed-signal oscilloscope
MSO2014B
100 MHz, 1GS/s, 1M record length, 4+16 channel mixed-signal oscilloscope
MSO2022B
200 MHz, 1 GS/s, 1M record length, 2+16 channel mixed-signal oscilloscope
MSO2024B
200 MHz, 1 GS/s, 1 M record length, 4+16 channel mixed-signal oscilloscope
Standard accessories
Probes
TPP0200
200 MHz, 10x passive probe (one per analog channel) for 100 and 200 MHz models
TPP0100
100 MHz, 10x passive probe (one per analog channel) for 70 MHz models
P6316 (MSO models only)
16-channel logic probe and accessory kit (one per instrument)
Accessories
063-4472-xx
Documentation CD
016-2008-xx
Accessory pouch
071-3078 -xx
Installation and safety manual
—
Power cord
—
OpenChoice® Desktop software
—
Calibration certificate documenting traceability to National Metrology Institute(s) and ISO9001 quality system registration
Warranty
Five-year warranty covering all parts and labor, excluding probes.
14 www.tektronix.com
MSO/DPO2000B Series Mixed Signal Oscilloscope
Application modules
DPO2AUTO
Automotive Serial Triggering and Analysis Module. Enables triggering on packet-level information on CAN bus and LIN bus as well
as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with
time stamp information.
DPO2COMP
Computer Serial Triggering and Analysis Module. Enables triggering on packet-level information on RS-232/422/485/UART buses
as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables
with time stamp information.
DPO2EMBD
Embedded Serial Triggering and Analysis Module. Enables triggering on packet-level information on I2C and SPI buses as well as
analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time
stamp information. Only two-wire SPI support is available on two-channel models.
Instrument options
Power cord and plug options
Please specify power plug version when ordering.
Opt. A0
North America power plug (115 V, 60 Hz)
Opt. A1
Universal Euro power plug (220 V, 50 Hz)
Opt. A2
United Kingdom power plug (240 V, 50 Hz)
Opt. A3
Australia power plug (240 V, 50 Hz)
Opt. A5
Switzerland power plug (220 V, 50 Hz)
Opt. A6
Japan power plug (100 V, 110/120 V, 60 Hz)
Opt. A10
China power plug (50 Hz)
Opt. A11
India power plug (50 Hz)
Opt. A12
Brazil power plug (60 Hz)
Opt. A99
No power cord
Language options 3 4
Opt. L0
English manual
Opt. L1
French manual
Opt. L2
Italian manual
Opt. L3
German manual
Opt. L4
Spanish manual
Opt. L5
Japanese manual
Opt. L6
Portuguese manual
Opt. L7
Simplified Chinese manual
Opt. L8
Traditional Chinese manual
Opt. L9
Korean manual
3
User manuals (PDF) in 11 languages are available on the CD and for download from http://www.tektronix.com/manuals. There are no printed user manuals.
4
The English option includes a front-panel label on the instrument. The other language options include a front-panel overlay.
www.tektronix.com 15
Datasheet
Opt. L10
Russian manual
Opt. L99
No manual
Language options include translated front-panel overlay for the selected language(s).
Service options
Opt. D1
Calibration Data Report
Recommended accessories
Probes
Tektronix offers over 100 different probes to meet your application needs. For a comprehensive listing of available probes, please visit www.tektronix.com/probes.
ADA400A
100X, 10X, 1X, 0.1X high-gain differential amplifier 6 5
P5100A
2.5 kV, 500 MHz, 100X high-voltage passive probe
TAP1500
1.5 GHz TekVPI® active voltage probe 6
TCP0020
50 MHz TekVPI® 20 Ampere AC/DC current probe 6
TCP0030
120 MHz TekVPI® 30 Ampere AC/DC current probe 6
TCP0150
20 MHz TekVPI® 150 Ampere AC/DC current probe 6
TCP2020
50 MHz TekVPI® 20 Ampere AC/DC current probe
TCPA300/400
Current measurement systems amplifier 7
TCP305
DC to 50 MHz 50 Ampere current probe for use with TCPA300
TCP404XL
DC to 2 MHz 500 Ampere current probe for use with TCPA400
TDP0500
500 MHz TekVPI® differential voltage probe with ±42 V differential input voltage 6 8
THDP0200
±1.5 kV 200 MHz high-voltage differential probe 6
THDP0100
±6 kV 100 MHz high-voltage differential probe 6
TMDP0200
±750 V 200 MHz high-voltage differential probe 6
5
Requires TPA-BNC adapter.
6
Requires TekVPI external power adapter (119-7465-00); one per oscilloscope.
7
Requires 50 Ω feed through termination between the oscilloscope input and the BNC cable.
8
Probes terminate into 50 Ω but oscilloscope will automatically adjust to account for 1 MΩ input.
16 www.tektronix.com
MSO/DPO2000B Series Mixed Signal Oscilloscope
Accessories
DPO2CONN
Adds Ethernet (10/100Base-T) and video out port
077-0737-xx
Service manual (English only) PDF-only, downloadable from www.tektronix.com/manuals
TPA-BNC
TekVPI® to TekProbe® BNC adapter
TEK-DPG
TekVPI® Deskew pulse generator signal source
067-1686-xx
Power measurement deskew and calibration fixture
196-3508-xx
Digital Probe Leadset (8 channels)
119-7465-xx
TekVPI® external power supply (power cord not included)
TEK-USB-488
GPIB-to-USB adapter
ACD2000
Soft transit case
200-5045-xx
Front protective cover
HCTEK4321
Hard transit case (requires ACD2000)
RMD2000
Rackmount kit
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.
www.tektronix.com 17
Datasheet
ASEAN / Australasia (65) 6356 3900
Belgium 00800 2255 4835*
Central East Europe and the Baltics +41 52 675 3777
Finland +41 52 675 3777
Hong Kong 400 820 5835
Japan 81 (3) 6714 3010
Middle East, Asia, and North Africa +41 52 675 3777
People's Republic of China 400 820 5835
Republic of Korea 001 800 8255 2835
Spain 00800 2255 4835*
Taiwan 886 (2) 2722 9622
* European toll-free number. If not accessible, call: +41 52 675 3777
Austria 00800 2255 4835*
Brazil +55 (11) 3759 7627
Central Europe & Greece +41 52 675 3777
France 00800 2255 4835*
India 000 800 650 1835
Luxembourg +41 52 675 3777
The Netherlands 00800 2255 4835*
Poland +41 52 675 3777
Russia & CIS +7 (495) 6647564
Sweden 00800 2255 4835*
United Kingdom & Ireland 00800 2255 4835*
Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777
Canada 1 800 833 9200
Denmark +45 80 88 1401
Germany 00800 2255 4835*
Italy 00800 2255 4835*
Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90
Norway 800 16098
Portugal 80 08 12370
South Africa +41 52 675 3777
Switzerland 00800 2255 4835*
USA 1 800 833 9200
Updated 10 April 2013
For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com.
Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and
price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
29 Sep 2014
www.tektronix.com
3GW-28413-3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement