null  null
User Quick Reference Guide
AC LIGHT
ON = AC Power
OFF = Power failure
The LCD will guide you
with detailed messages.
STATUS LIGHT
Use the arrow keys to
scroll the menu or choices.
When green:
ON = Zones closed
OFF = Zone(s) open
Flash = Exit delay
When red:
ON = Area(s) armed
OFF = Area(s) disarmed
Flash = Alarm
LCD Keypad
Press the corresponding
one-touch button for 2
seconds to perform an
action without entering
your Access Code.
[CLEAR] = Erases current data entry or reverts to the preceding step
[ENTER] = Saves current data and exits current menu
HOW TO ARM
1. Enter your [ACCESS CODE] and then:
To Regular Arm: Press the [ARM] key
(Arms entire area when all zones are closed).
To Force Arm: Press the [FORCE] key
(Arms entire area without waiting for all zones to close)
To Stay Arm:
Press the [STAY] key
(Arms area’s perimeter only, which allows you to remain in the protected area)
To Instant Arm: Press the [5] key
(Stay arms the area but an alarm will occur instantly any zones open)
2. Select the desired area or press the [0] key for all areas
HOW TO DISARM
To Disarm when entering:
To Disarm from within the perimeter:
1. Enter your [ACCESS CODE]
2. Select the area(s) if necessary
1. Enter your [ACCESS CODE] and then
press the [DISARM] key
2. Select the area(s) if necessary
PANIC KEYS
To send a silent or audible alarm to your security company, press and hold one of
the key combinations listed below for two seconds.
Panic Alarm Type
Key Combinations
Police
Keys [1] and [3]
Medical
Keys [4] and [6]
Fire
Keys [7] and [9]
HOW TO BYPASS ZONES
When a zone is bypassed, it remains
unarmed once the corresponding area
is armed:
1. Enter your [ACCESS CODE]
2. Press the [BYP] key
3. Use the [S] or [T] keys to scroll
through the zones and then press
the [BYP] for the desired zone
4. Press [ENTER] to save and exit
ALARM MEMORY DISPLAY
To view the alarms that occurred
during the last armed period:
1. Press the [MEM] key.
All zones that were breached
during the last armed period will
scroll on the screen
2. Press [CLEAR] to exit
Some features in this Quick Start need to be activated by your installer.
We recommend that you test your security system on a weekly basis. Please refer to the appropriate user
manual
paradox.com
Printed in Canada - 04/2007
EVO641-EQ06
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement