STM36941306

STM36941306
ULN2001, ULN2002
ULN2003, ULN2004
Seven Darlington array
Datasheet − production data
Features
■
Seven Darlingtons per package
■
Output current 500 mA per driver (600 mA
peak)
■
Output voltage 50 V
■
Integrated suppression diodes for inductive
loads
■
Outputs can be paralleled for higher current
■
TTL/CMOS/PMOS/DTL compatible inputs
■
Inputs pinned opposite outputs to simplify
layout
Description
The ULN2001, ULN2002, ULN2003 and ULN
2004 are high voltage, high current Darlington
arrays each containing seven open collector
Darlington pairs with common emitters. Each
channel rated at 500 mA and can withstand peak
currents of 600 mA. Suppression diodes are
included for inductive load driving and the inputs
are pinned opposite the outputs to simplify board
layout.
DIP-16
SO-16
(Narrow)
These versatile devices are useful for driving a
wide range of loads including solenoids, relays
DC motors, LED displays filament lamps, thermal
printheads and high power buffers.
The ULN2001A/2002A/2003A and 2004A are
supplied in 16 pin plastic DIP packages with a
copper leadframe to reduce thermal resistance.
They are available also in small outline package
(SO-16) as ULN2001D1/2002D1/2003D1/
2004D1
The versions interface to all common logic
families:
– ULN2001 (general purpose, DTL, TTL,
PMOS, CMOS)
– ULN2002 (14 - 25 V PMOS)
– ULN2003 (5 V TTL, CMOS)
– ULN2004 (6 - 15 V CMOS, PMOS)
Table 1.
Device summary
Order codes
ULN2001A
ULN2001D1013TR
ULN2002A
ULN2002D1013TR
ULN2003A
ULN2003D1013TR
ULN2004A
ULN2004D1013TR
June 2012
This is information on a product in full production.
Doc ID 5279 Rev 8
1/16
www.st.com
16
Contents
ULN2001, ULN2002, ULN2003, ULN2004
Contents
1
Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6
Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
7
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8
Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
9
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/16
Doc ID 5279 Rev 8
ULN2001, ULN2002, ULN2003, ULN2004
1
Diagram
Figure 1.
Schematic diagram
Diagram
ULN2001 (each driver)
ULN2002 (each driver)
ULN2003 (each driver)
ULN2004 (each driver)
Doc ID 5279 Rev 8
3/16
Pin configuration
2
Pin configuration
Figure 2.
Pin connections (top view)
4/16
ULN2001, ULN2002, ULN2003, ULN2004
Doc ID 5279 Rev 8
ULN2001, ULN2002, ULN2003, ULN2004
3
Maximum ratings
Maximum ratings
Table 2.
Absolute maximum ratings
Symbol
Parameter
Value
Unit
VO
Output voltage
50
V
VI
Input voltage (for ULN2002A/D - 2003A/D 2004A/D)
30
V
IC
Continuous collector current
500
mA
IB
Continuous base current
25
mA
TA
Operating ambient temperature range
- 40 to 85
°C
Storage temperature range
- 55 to 150
°C
150
°C
TSTG
TJ
Table 3.
Symbol
RthJA
Junction temperature
Thermal data
Parameter
Thermal resistance junction-ambient, Max.
Doc ID 5279 Rev 8
DIP-16
SO-16
Unit
70
120
°C/W
5/16
Electrical characteristics
4
ULN2001, ULN2002, ULN2003, ULN2004
Electrical characteristics
TA = 25 °C unless otherwise specified.
Table 4.
Symbol
ICEX
Electrical characteristics
Parameter
Output leakage current
Collector-emitter saturation
VCE(SAT)
voltage (Figure 5.)
II(ON)
Input current (Figure 6.)
Test condition
Min.
VI(ON)
50
TA = 85°C, VCE = 50 V (Figure 3.)
100
TA = 85°C for ULN2002, VCE = 50 V,
VI = 6 V (Figure 4.)
500
TA = 85°C for ULN2002, VCE = 50 V,
VI = 1V (Figure 4.)
500
IC = 100 mA, IB = 250 µA
0.9
1.1
IC = 200 mA, IB= 350 µA
1.1
1.3
IC = 350 mA, IB= 500 µA
1.3
1.6
for ULN2002, VI = 17 V
0.82
1.25
for ULN2003, VI = 3.85 V
0.93
1.35
for ULN2004, VI = 5 V
0.35
0.5
1
1.45
Input current (Figure 7.)
TA = 85°C, IC = 500 µA
Input voltage (Figure 8.)
VCE= 2 V, for ULN2002
IC = 300 mA
for ULN2003
IC = 200 mA
IC = 250 mA
IC = 300 mA
for ULN2004
IC = 125 mA
IC = 200 mA
IC = 275 mA
IC = 350 mA
hFE
DC Forward current gain
(Figure 5.)
CI
Input capacitance
tPLH
Turn-on delay time
tPHL
Max.
VCE = 50 V, (Figure 3.)
for ULN2001, VCE = 2 V,
IC = 350 mA
Unit
µA
V
mA
VI = 12 V
II(OFF)
Typ.
50
65
µA
13
2.4
2.7
3
V
5
6
7
8
1000
15
25
pF
0.5 VI to 0.5 VO
0.25
1
µs
Turn-off delay time
0.5 VI to 0.5 VO
0.25
1
µs
Clamp diode leakage current
(Figure 9.)
VR = 50 V
50
IR
TA = 85°C, VR = 50 V
100
VF
Clamp diode forward voltage
(Figure 10.)
6/16
IF = 350 mA
Doc ID 5279 Rev 8
µA
1.7
2
V
ULN2001, ULN2002, ULN2003, ULN2004
Test circuits
5
Test circuits
Figure 3.
Output leakage current
Figure 5.
Collector-emitter saturation voltage Figure 6.
Input current (ON)
Figure 7.
Input current (OFF)
Input voltage
Figure 4.
Figure 8.
Doc ID 5279 Rev 8
Output leakage current (for
ULN2002 only)
7/16
Test circuits
Figure 9.
8/16
ULN2001, ULN2002, ULN2003, ULN2004
Clamp diode leakage current
Figure 10. Clamp diode forward voltage
Doc ID 5279 Rev 8
ULN2001, ULN2002, ULN2003, ULN2004
6
Typical performance characteristics
Typical performance characteristics
Figure 11. Collector current vs. saturation
voltage (TJ = 25°C)
Figure 12. Collector current vs. saturation
voltage
I OUT [mA]
85°C
25°C
-30°C
IIN = 500 µA
VCESAT [V]
Figure 13. Input current vs. input voltage
Figure 14. Input current vs. input voltage
(Ta = 25°C)
ULN2003A
Ta = 25°C
ULN2003A
Iout=100 mA
Io ut=200mA
Max
Iou t=300mA
Typ
Min
Figure 15. Collector current vs. input current
Figure 16. hFE vs. output current
85 °C
I OUT [mA]
-30 °C
25 °C
VCE = 2 V
DC Current Transfer Ratio (hFE)
10000
VCE = 2 V
85 °C
1000
-40 °C
25 °C
100
10
1
1
10
100
1000
Output current IOUT [mA]
IIN [μA]
Doc ID 5279 Rev 8
9/16
Typical performance characteristics
ULN2001, ULN2002, ULN2003, ULN2004
Figure 17. Peak collector current vs. duty
cycle (DIP-16)
Ic peak
(mA)
D96IN451
NUMBER OF ACTIVE OUTPUT
7 6 5
500
4
3
2
Figure 18. Peak collector current vs. duty
cycle (SO-16)
Ic peak
(mA)
D96IN452A
Tamb=70°C
(SO16)
500
400
400
300
300
Tamb=70°C
(DIP16)
2
3
5
200
200
7
100
100
NUMBER OF ACTIVE OUTPUT
0
0
0
10/16
20
40
60
80
DC
Doc ID 5279 Rev 8
0
20
40
60
80
100
DC
ULN2001, ULN2002, ULN2003, ULN2004
7
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 5.
DIP-16L mechanical data
mm.
Dim.
Min.
Typ.
A
Max.
5.33
A1
0.38
A2
2.92
3.30
4.95
b
0.36
0.46
0.56
b2
1.14
1.52
1.78
c
0.20
0.25
0.36
D
18067
19.18
19.69
E
7.62
7.87
8.26
E1
6.10
6.35
7.11
e
2.54
e1
17.78
eA
7.62
eB
L
10.92
2.92
Doc ID 5279 Rev 8
3.30
3.81
11/16
Package mechanical data
ULN2001, ULN2002, ULN2003, ULN2004
Figure 19. DIP-16L package dimensions
0015895_E
12/16
Doc ID 5279 Rev 8
ULN2001, ULN2002, ULN2003, ULN2004
Table 6.
Package mechanical data
SO-16 narrow mechanical data
mm.
inch.
Dim.
Min.
Typ.
A
a1
Max.
Min.
Typ.
1.75
0.1
0.25
a2
Max.
0.069
0.004
0.009
1.6
0.063
b
0.35
0.46
0.014
0.018
b1
0.19
0.25
0.007
0.010
C
0.5
c1
0.020
45°
(typ.)
D(1)
9.8
10
0.386
0.394
E
5.8
6.2
0.228
0.244
e
1.27
0.050
e3
8.89
0.350
F(1)
3.8
4.0
0.150
0.157
G
4.60
5.30
0.181
0.208
L
0.4
1.27
0.150
0.050
M
0.62
S
0.024
8° (max.)
Figure 20. SO-16 package dimensions
Doc ID 5279 Rev 8
13/16
Order codes
8
Order codes
Table 7.
14/16
ULN2001, ULN2002, ULN2003, ULN2004
Order codes
Part numbers
Packages
ULN2001A
DIP-16
ULN2002A
DIP-16
ULN2003A
DIP-16
ULN2004A
DIP-16
ULN2001D1013TR
SO-16 in tape and reel
ULN2002D1013TR
SO-16 in tape and reel
ULN2003D1013TR
SO-16 in tape and reel
ULN2004D1013TR
SO-16 in tape and reel
Doc ID 5279 Rev 8
ULN2001, ULN2002, ULN2003, ULN2004
9
Revision history
Revision history
Table 8.
Revision history
Date
Revision
Changes
05-Dec-2006
5
Order code updated and document reformatted.
28-Aug-2007
6
Added Table 1 in cover page.
07-May-2012
7
Modified: Figure 12 on page 9.
Added: Figure 13, 14, 15 and Figure 16 on page 9.
01-Jun-2012
8
Updated: DIP-16L package mechanical data Table 5 on page 11 and
Figure 19 on page 12.
Doc ID 5279 Rev 8
15/16
ULN2001, ULN2002, ULN2003, ULN2004
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
16/16
Doc ID 5279 Rev 8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement