LMCE Series All Metal Exit Sign TYPICAL SPECIFICATIONS FEATURES

LMCE Series All Metal Exit Sign TYPICAL SPECIFICATIONS FEATURES
Project/Location:
Contractor:
Date:
LMCE Series
Prepared by:
All Metal Exit Sign
Lumacell Model:
FEATURES
TYPICAL SPECIFICATIONS
•Now with two-wires universal AC input
•Based on a modular design concept, this Exit Sign comes
pre-assembled for quick, easy installation
•Metal construction using Canadian cold-rolled steel
•Universal mounting – end, wall or ceiling
•Supplied standard with two metal stencil plates, red diffusing lenses
and back plate
•Easy access to wiring entry for all mounting options
•Canopy mounting system designed specifically for ease of installation
•Universal, field-selectable chevrons (knockout)
•Now with long-life, energy-efficient ALINGAP technology LED light
source
•Energy efficient – consumes less than 3W in AC or DC mode
•Normal AC and emergency DC operation – 120 to 347VAC input; 6 to
24VDC input
•Also available with power pack; see 8LMCE catalogue sheet
•CSA certified, meets or exceeds C860 requirements
Supply and install the Lumacell® LMCE Exit Signs. The equipment shall
operate with universal 2-wire AC input voltage of 120 to 347VAC at less than
1.5W and universal 2-wire DC input voltage from 6 to 24VDC at less than
1.5W for single and double face signs. The sign shall be suitable for wall,
end, or ceiling mount. The faceplates shall be constructed of steel and shall
come standard with knockout chevrons. The frame shall be of a one-piece
steel construction.
The light source shall be light-emitting diodes (LED). The LED lamps shall
provide illumination in normal and emergency operation and shall be mounted
inside the exit housing, not on the face. Red LEDs shall be of ALINGAP
technology.
An LED-sensitive diffuser shall be mounted behind the legend to provide the
6” high by 3/4” stroke letters with even illumination.
The Exit Sign in a Self-Powered configuration shall stay illuminated during
emergency operation for at least 90 minutes upon AC failure.
The Exit Sign shall be CSA-C860 approved.
The equipment shall be Lumacell® Model:
.
WIRE GUARDS
DIMENSIONS
Dimensions are approximate and subject to change.
460.0079-L
Wall Mount
460.0027-L
End Mount
460.0028-L
Ceiling Mount
45/8” [11.7 cm]
POWER CONSUMPTION
73/8” [18.7 cm]
75/8” [19.2 cm]
87/8” [22.4 cm]
MODEL
12 ” [30.7 cm]
1/8
21/8” [5.3 cm]
AC SPECS
DC SPECS
AC-only, red
120 to 347VAC
Less than 1.5W
-
-
AC/DC standard, red
120 to 347VAC
Less than 1.5W
6 to 24VDC
Less than 1.5W
AC/special DC, red
120/277/
347VAC
Less than 3W
36 or 48 or
120VDC
Less than 2.5W
Self-Powered red
120 to 347VAC
Less than 3W
Ni-Cd Battery
Min. 60 minutes
AC-only, green
120 to 347VAC
Less than 1.5W
-
-
AC/DC standard, green 120 to 347VAC
Less than 1.5W
6 to 24VDC
Less than 2.5W
Less than 3W
Ni-Cd Battery
Min. 90 minutes
Self-Powered green
120 to 347VAC
13 ” [33.9 cm]
3/8
ORDERING INFORMATION
SERIES
LMCE= L ED EXIT sign/
universal mount
COLOUR
VOLTAGE
Blank= factory white
BK= black
SG= silvered gray
UN= 120 to 347VAC, 6 to 24VDC
UN00= 120 to 347VAC, no dc*
UN36= 120/277/347VAC, 36VDC**
UN48= 120/277/347VAC, 48VDC**
UN120= 120/347VAC, 120VDC**
SP= 120 to 347VAC, Self-Powered
120VACDC2= 120VAC, 120VDC, 2 wires
Other colours available.
Consult your sales representative.
* Supply as single face.
**For green legends please consult your sales representative.
OPTIONS
VRSTP= vandal resistant shield and tamper proof screws
TP= tamper proof screws
990.0119-L= tamper proof bit*
GN= green legend
* One bit needed per order.
EXAMPLE: LMCEUN
www.lumacell.com
43
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement