Daewoo | DMR - 08SE | Operating instructions | Daewoo DMR - 08SE Operating instructions

DMRPWT635GL_eng.book 1 ページ
2013年2月4日 月曜日 午後1時25分
Operating Instructions
Blu-ray Disc™ Player / HDD Recorder
Model No. DMR-PWT635
DMR-PWT530
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
• This Blu-ray Disc Player / HDD Recorder is for viewing and recording free to view channels
only. It does not receive pay TV or encrypted channels.
Region management information
BD-Video:
This unit can play BD-Video discs
supporting the region code “B”.
e.g.,
DVD-Video: This unit can play DVD-Video discs
supporting the region number “4”
or “ALL”.
e.g.,
VQT4L31
GL
until
2013/03/01
DMRPWT635GL_eng.book 2 ページ
2013年2月4日 月曜日 午後1時25分
Safety precautions
WARNING
CAUTION
Unit
• To reduce the risk of fire, electric shock or
product damage,
- Do not expose this unit to rain, moisture,
dripping or splashing.
- Do not place objects filled with liquids, such as
vases, on this unit.
- Use only the recommended accessories.
- Do not remove covers.
- Do not repair this unit by yourself. Refer
servicing to qualified service personnel.
- Do not let metal objects fall inside this unit.
- Do not place heavy items on this unit.
Unit
• This unit utilizes a laser. Use of controls or
adjustments or performance of procedures other
than those specified herein may result in
hazardous radiation exposure.
• Do not place sources of naked flames, such as
lighted candles, on this unit.
• This unit may receive radio interference caused
by mobile telephones during use. If such
interference occurs, please increase separation
between this unit and the mobile telephone.
• This unit is intended for use in moderate
climates.
AC mains lead
• To reduce the risk of fire, electric shock or
product damage,
- Ensure that the power supply voltage
corresponds to the voltage printed on this unit.
- Insert the mains plug fully into the socket
outlet.
- Do not pull, bend, or place heavy items on the
lead.
- Do not handle the plug with wet hands.
- Hold onto the mains plug body when
disconnecting the plug.
- Do not use a damaged mains plug or socket
outlet.
• The mains plug is the disconnecting device.
Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.
Placement
• Place this unit on an even surface.
• To reduce the risk of fire, electric shock or
product damage,
- Do not install or place this unit in a bookcase,
built-in cabinet or in another confined space.
Ensure this unit is well ventilated.
- Do not obstruct this unit’s ventilation openings
with newspapers, tablecloths, curtains, and
similar items.
- Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive
vibration.
Small object
• Keep the Memory Card out of reach of children
to prevent swallowing.
2
VQT4L31
DMRPWT635GL_eng.book 3 ページ
2013年2月4日 月曜日 午後1時25分
Batteries
• Danger of explosion if battery is incorrectly
replaced. Replace only with the type
recommended by the manufacturer.
• Mishandling of batteries can cause electrolyte
leakage and may cause a fire.
- Do not mix old and new batteries or different
types at the same time.
- Do not heat or expose to flame.
- Do not leave the battery(ies) in a car exposed
to direct sunlight for a long period of time with
doors and windows closed.
- Do not take apart or short circuit.
- Do not recharge alkaline or manganese
batteries.
- Do not use batteries if the covering has been
peeled off.
- Remove batteries if you do not intend to use
the remote control for a long period of time.
Store in a cool, dark place.
• When disposing the batteries, please contact
your local authorities or dealer and ask for the
correct method of disposal.
CLASS 1
LASER PRODUCT
(Inside of product)
Supplied accessories
Please check and identify the supplied
accessories.
(Product numbers correct as of February 2013.
These may be subject to change.)
Remote control (N2QAYB000757):
Batteries for remote control:
AC mains lead:
RF coaxial cable:
HDMI cable:
1 pc.
2 pcs.
1 pc.
1 pc.
1 pc.
• Do not use AC mains lead with other equipment.
Indemnity concerning recorded content
Panasonic does not accept any responsibility for
damages directly or indirectly due to any type of
problems that result in loss of recording or edited
content (data), and does not guarantee any
content if recording or editing does not work
properly. Likewise, the above also applies in a
case where any type of repair is made to the unit
(including any other non-HDD related
component).
Restriction on use of unauthorized copied
content
This unit adopts the following technology for
copyright protection.
Cinavia Notice
This product uses Cinavia technology to limit
the use of unauthorized copies of some
commercially-produced film and videos and
their soundtracks. When a prohibited use of
an unauthorized copy is detected, a message
will be displayed and playback or copying will
be interrupted. More information about
Cinavia technology is provided at the Cinavia
Online Consumer Information Center at
http://www.cinavia.com. To request additional
information about Cinavia by mail, send a
postcard with your mailing address to:
Cinavia Consumer Information Center, P.O.
Box 86851, San Diego, CA, 92138, USA.
VQT4L31
3
DMRPWT635GL_eng.book 4 ページ
2013年2月4日 月曜日 午後1時25分
Table of contents
Safety precautions . . . . . . . . . . . . . . . . . . . . . .2
Supplied accessories . . . . . . . . . . . . . . . . . . . .3
Getting started
HDD and media information . . . . . . . . . . . . . . .6
- Recordable/playable contents . . . . . . . . . . . . . . . . .6
- Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Unit care . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Control reference guide . . . . . . . . . . . . . . . . .12
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .14
- Basic connections . . . . . . . . . . . . . . . . . . . . . . .14
- Amplifier/receiver connections . . . . . . . . . . . . . . .15
- Network connection . . . . . . . . . . . . . . . . . . . . . .17
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
- TV operation buttons . . . . . . . . . . . . . . . . . . . . .18
- Easy Setting . . . . . . . . . . . . . . . . . . . . . . . . . . .19
- Easy Network Setting . . . . . . . . . . . . . . . . . . . . .20
FUNCTION MENU screen . . . . . . . . . . . . . . .22
Watching broadcasts
Watching broadcasts . . . . . . . . . . . . . . . . . . .23
- Using Channel List . . . . . . . . . . . . . . . . . . . . . . .23
- Using TV Guide system . . . . . . . . . . . . . . . . . . . .24
- Using channel information . . . . . . . . . . . . . . . . . .24
- Operations while watching broadcast . . . . . . . . . . .25
- REWIND LIVE TV/PAUSE LIVE TV . . . . . . . . . . . .25
Recording
Recording TV programmes. . . . . . . . . . . . . . .27
- Operation during Recording . . . . . . . . . . . . . . . . .28
Timer recording. . . . . . . . . . . . . . . . . . . . . . . .29
- Manually programming timer recording . . . . . . . . . .30
- Timer recording options . . . . . . . . . . . . . . . . . . . .30
- Timer recording from channel information . . . . . . . .31
- Remote recording from outside . . . . . . . . . . . . . . .31
- Notes on timer recording . . . . . . . . . . . . . . . . . . .31
- To confirm and edit a timer programme . . . . . . . . . .32
Playing back video
Playing titles on the HDD . . . . . . . . . . . . . . . .33
- DIRECT NAVIGATOR (VIDEO) screen . . . . . . . . . .33
Playing titles on the media . . . . . . . . . . . . . . .36
- Notes for BD-Live discs . . . . . . . . . . . . . . . . . . . .37
Operation during play . . . . . . . . . . . . . . . . . . .38
- General operations. . . . . . . . . . . . . . . . . . . . . . .38
- 3D video playback . . . . . . . . . . . . . . . . . . . . . . .40
Editing video
Deleting recorded titles . . . . . . . . . . . . . . . . . .41
Editing recorded titles . . . . . . . . . . . . . . . . . . .42
4
VQT4L31
Copying video
Copying titles . . . . . . . . . . . . . . . . . . . . . . . . .45
Photo
Playing photos . . . . . . . . . . . . . . . . . . . . . . . .46
- DIRECT NAVIGATOR (PHOTO) screen . . . . . . . . .46
- Photo play option . . . . . . . . . . . . . . . . . . . . . . . .47
- Slideshow settings . . . . . . . . . . . . . . . . . . . . . . .47
Editing photos . . . . . . . . . . . . . . . . . . . . . . . . .48
Copying photos. . . . . . . . . . . . . . . . . . . . . . . .49
- Selecting and copying the photos . . . . . . . . . . . . .49
- Copying automatically . . . . . . . . . . . . . . . . . . . . .49
Music
Playing music . . . . . . . . . . . . . . . . . . . . . . . . .50
- Copying music (MP3) to HDD . . . . . . . . . . . . . . . .50
- Playing music recorded on HDD . . . . . . . . . . . . . .51
- Operations during music play . . . . . . . . . . . . . . . .52
Editing music/playlist . . . . . . . . . . . . . . . . . . .53
With Other Equipment
Copying the HD Video or the SD Video . . . . .54
- Copying HD Video (AVCHD) . . . . . . . . . . . . . . . .54
- Copying SD Video (MPEG2) . . . . . . . . . . . . . . . .55
Smart Home Networking (DLNA) . . . . . . . . . .56
- Using this unit as Server . . . . . . . . . . . . . . . . . . .56
- Using this unit as Client . . . . . . . . . . . . . . . . . . . .57
- Using this unit as Media Renderer . . . . . . . . . . . . .58
Convenient functions
VIERA Connect (Enjoying Internet Service) . . . . .59
- To enjoy video communication (e.g., SkypeTM) . . . . .59
Format SD card . . . . . . . . . . . . . . . . . . . . . . .60
Registering the external HDD (USB HDD). . . . .61
- Connecting the USB HDD . . . . . . . . . . . . . . . . . .61
- Disconnecting the USB HDD . . . . . . . . . . . . . . . .61
- Registering the USB HDD . . . . . . . . . . . . . . . . . .62
VIERA Link functions . . . . . . . . . . . . . . . . . . .63
Playback menu . . . . . . . . . . . . . . . . . . . . . . . .64
DMRPWT635GL_eng.book 5 ページ
2013年2月4日 月曜日 午後1時25分
Changing the unit’s settings . . . . . . . . . . . . .
- Common procedures . . . . . . . . . . . . . . . . . . . . .
- Digital TV Tuning . . . . . . . . . . . . . . . . . . . . . . .
- HDD / Disc / USB HDD . . . . . . . . . . . . . . . . . . .
- Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Language code list . . . . . . . . . . . . . . . . . . . . . .
Software (Firmware) Update . . . . . . . . . . . . .
Other operations . . . . . . . . . . . . . . . . . . . . . .
- Entering text . . . . . . . . . . . . . . . . . . . . . . . . . .
- Switching the aspect ratio of the screen . . . . . . . . .
- HOLD function . . . . . . . . . . . . . . . . . . . . . . . . .
67
67
69
71
73
73
74
74
76
78
81
82
83
83
83
83
Troubleshooting
Troubleshooting guide . . . . . . . . . . . . . . . . . .
- General operation . . . . . . . . . . . . . . . . . . . . . . .
- Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- TV screen and video . . . . . . . . . . . . . . . . . . . . .
- Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Recording, timer recording and copying . . . . . . . . .
- Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- TV Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Broadcast . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- VIERA Link . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Messages on the unit’s display . . . . . . . . . . . . . .
- When you experience problems with
Easy Network Setting . . . . . . . . . .
84
84
85
85
86
87
87
88
88
88
89
89
89
89
90
90
About descriptions in these operating
instructions
• These operating instructions are applicable to models
DMR-PWT635 and DMR-PWT530. The illustrations in
these Operating Instructions show images of
DMR-PWT635 unless otherwise indicated.
• [PWT635] :indicates features applicable to
DMR-PWT635 only.
• [PWT530] :indicates features applicable to
DMR-PWT530 only.
• Pages to be referred to are indicated as “> ±±”.
Getting started
Watching broadcasts
Recording
Playing back video
Editing video
Copying video
. . . . . . . . . . 92
Photo
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 94
Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Limited Warranty . . . . . . . . . . . . . . . . . . . . . 100
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Music
Reference
With Other Equipment
Convenient functions
Troubleshooting
Reference
VQT4L31
5
DMRPWT635GL_eng.book 6 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
Getting started
HDD and media information
Recordable/playable contents
(–: Impossible)
Media type
Built-in hard disk drive
(HDD)
External hard disk drive
(USB HDD) (> 9)
BD-Video
Standard symbol
Playable contents
•
•
•
[HDD]
•
•
•
•
•
•
[USB_HDD]
•
•
•
•
•
Video
AVCHD/AVCHD 3D
JPEG
MPO (3D photo)
MP3
Video§1
AVCHD/AVCHD 3D§2, 3
SD Video (MPEG2)§4
• MPEG2
MP4
• MKV
Xvid
JPEG
MPO (3D photo)
MP3
Video
[BD-RE]
BD-R
[BD-R]
DVD-Video§5
•
•
•
•
•
•
•
•
•
Video
AVCHD/AVCHD 3D
JPEG
MPO (3D photo)
Video
AVCHD/AVCHD 3D§2
Xvid
MKV
Video
[DVD-R]
6
VQT4L31
–
–
–
[DVD-V]
DVD-R
DVD-R DL
–
–
[BD-V]
BD-RE
Recordable
contents
•
•
•
•
•
Video
• AVCHD§2
Xvid
• MKV
JPEG
MPO (3D photo)
MP3
–
DMRPWT635GL_eng.book 7 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
(–: Impossible)
Media type
DVD-RW
Standard symbol
Playable contents
• Video
§2
[DVD-RW] • AVCHD
+R/+R DL
[+R]
+RW
[+RW]
Audio CD (CD-DA)
•
•
•
•
•
Video
AVCHD§2
Video
AVCHD§2
Music
Recordable
contents
–
–
–
–
[CD]
CD
(including CD-R/RW)
SD Cards
[SD]
USB memory
§1
§2
§3
§4
§5
[USB]
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Xvid
• MKV
JPEG
• MP3
MPO (3D photo)
AVCHD/AVCHD 3D§2
SD Video (MPEG2)§4
MP4
• JPEG
MPO (3D photo)
AVCHD/AVCHD 3D§2, 3
SD Video (MPEG2)§4
• MPEG2
MP4
• MKV
Xvid
JPEG
MPO (3D photo)
MP3
–
• JPEG
• MPO (3D photo)
–
It cannot be recorded directly. (Only compatible with copying from the built-in HDD)
Recorded with AVCHD format compatible devices (Panasonic video camera, etc.). It may not be
able to play back depending on the device.
It cannot be played back directly from the USB HDD or USB memory. Playback is possible by
copying to the HDD. (> 54)
Recorded with SD-Video format compatible devices (Panasonic video camera, etc.). It can be
played back only after copying to HDD. (> 55)
Includes finalised DVD-R, DVD-R DL, DVD-RW, +R and +R DL.
• The producer of the disc can control how discs are played. So you may not always be able to control play as described in
these operating instructions. Read the disc’s instructions carefully.
• With certain recording states and folder structures, the play order may differ or playback may not be possible.
VQT4L31
7
DMRPWT635GL_eng.book 8 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
HDD and media information
Playable contents on a DLNA server
When this unit works as a DLNA client (> 57), following contents are playable.
• Recorded video§
• JPEG
• AVCHD§
• MPO (3D photo)
• MP4
• MP3
• MPEG2
• FLAC
§
Only when the server is another DIGA. (> 56)
• Depending on the server, the contents other than stated above can be played back.
About extension of files
File format
MP4
MPEG2
Extension
“.MP4”
“.mp4”
“.MOV”
“.mov”
“.MPG”
“.mpg”
“.MPEG” “.mpeg”
“.M2TS” “.m2ts”
“.MTS”
“.mts”
“.TS”
“.ts”
Xvid
“.AVI”
“.avi”
“.srt”
“.SUB”
“.sub”
“.TXT”
“.txt”
Subtitle text files§ “.SRT”
MKV
“.MKV”
“.mkv”
“.srt”
“.SSA”
“.ssa”
“.ASS”
“.ass”
“.SUB”
Subtitle text files§ “.SRT”
“.sub”
“.TXT”
“.txt”
JPEG
“.JPG”
“.jpg”
MPO (3D photo)
“.MPO”
“.mpo”
MP3
“.MP3”
“.mp3”
§
The video file and subtitle text files are inside the same folder, and the file names are the same
except for the file extensions.
• Some files may not be played back even if they have these extensions.
8
VQT4L31
DMRPWT635GL_eng.book 9 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
Notes
Notes for an External HDD (USB HDD)
You can use an external HDD in the following two ways. (A single HDD cannot handle those two ways
simultaneously.)
• For recorded titles
Moving titles in the built-in HDD to a USB HDD to save the capacity of the built-in HDD.
• The USB HDD must first be registered on this unit. (> 61)
• For data files
Playing back MP4, JPEG, MP3, etc. (data files) in a USB HDD with this unit.
• The USB HDD must be formatted in FAT12, FAT16, FAT32 and NTFS file system.
• The USB HDD over 2 TB is not usable.
• This unit supports USB 2.0 High Speed.
• Although this unit can use USB 3.0 devices as USB 2.0 devices, in certain cases USB 3.0 devices cannot be used due to
differing connector shape, larger current ratings, etc. (Use of USB 2.0 devices is recommended.)
• This unit does not recognize USB HDDs other than those in which the size of one sector is 512-bytes. (For details, consult the
dealer of your USB HDD.)
• This unit does not guarantee connection with all USB devices.
Notes for the disc
• Disc recorded on a recorder, PC, etc.
• It may be necessary to finalize the disc, create Top Menu or close the session on the equipment
used for recording to play on this unit.
• Discs that cannot be played
- DVD-RAM
- HD DVD
- CD-ROM, Photo CD, PD, etc.
- DVD-Audio
- Super Video CD, Super Audio CD, Video CD
• Operation and sound quality of CDs that do not conform to CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
VQT4L31
9
DMRPWT635GL_eng.book 10 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
HDD and media information
Notes for the SD cards
Media handling
• Compatible SD card
- SD Memory Card
(from 8 MB to 2 GB, FAT12 and FAT16
formats)
- SDHC Memory Card
(from 4 GB to 32 GB, FAT32 format)
- SDXC Memory Card
(48 GB, 64 GB, exFAT format)
• Do not touch the recorded surface of the discs
or the terminal surface of the SD cards.
• Using miniSD card or microSD card
Mini-type and micro-type cards can also be
used, but must be used with adaptor cards
(optional).
To format an SD card
Refer to “Format SD card”. (> 60)
• Usable memory is slightly less than the card capacity.
• If the SD card is formatted on other equipment, the time
necessary for recording may be longer or the card may not
be able to be used on this unit. In these cases, format the
card on this unit.
• SDHC Memory Cards and SDXC Memory Cards can be
used in equipment that is compatible with the appropriate
cards. (SDHC Memory Cards can also be used in
equipment compatible with SDXC Memory Cards.)
Notes for the USB memories
USB memories support FAT12, FAT16, FAT32
and NTFS file systems.
• The USB memory over 2 TB is not usable.
• This unit supports USB 2.0 High Speed.
• This unit does not guarantee connection with all USB
devices.
10
VQT4L31
DO
DO NOT
• If there is dirt or condensation on the disc, wipe
with a damp cloth and then wipe dry.
DO
DO NOT
• Do not attach labels or stickers to discs.
• Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
• Do not use ballpoint pens or other hard writing
implements, when writing on the label side of
the disc.
• Do not drop, stack, or impact discs.
• Do not place objects on discs.
• Do not use the following discs:
- Discs with exposed adhesive from removed
stickers or labels (rental discs, etc.).
- Discs that are badly warped or cracked.
- Irregularly shaped discs.
DO NOT
• Do not expose the terminals of the SD card to
water, garbage or other strange things.
• Do not place in the following areas:
- In hot places, such as under the direct
sunlight.
- In very dusty or humid areas.
- Locations susceptible to significant difference
in temperature (condensation can occur).
- Where static electricity or electromagnetic
waves occur.
DMRPWT635GL_eng.book 11 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
Unit care
HDD/USB HDD handling care
When moving the unit
• The HDD is a high precision device
The HDD is a high precision recording
instrument and is easily susceptible to damage.
Therefore, be careful of the following points
while the unit is turned on, especially during
operation, otherwise the HDD and the recorded
content may be damaged:
- Do not subject the unit to any vibration and
shock.
- Do not remove the AC mains lead from the
household mains socket.
Before moving the unit, ensure the disc tray is
empty.
1 Switch the unit to standby mode. (Wait until
“BYE” disappears from the display.)
2 Remove the AC mains lead from the
household mains socket.
3 Move only after the unit has come to a
complete stop (approx. 3 minutes) in order to
avoid subjecting to vibration and shock. (Even
after the unit is switched to standby mode, the
HDD continues operating for a short time.)
This unit cannot save (backup) the HDD titles to
media. You have to be very careful when
handling the unit and editing the title.
• If the HDD or USB HDD is damaged, the
recorded content cannot be recovered.
Setup precautions
• Place the unit on a surface that is flat and
not subject to vibration or impact.
• Do not place on anything that generates heat
like a Set Top Box, etc.
• Place in an area where condensation does
not occur. Conditions where condensation
may occur
- When there is an extreme change in
temperature (e.g., when subjected to an air
conditioner or when cooled air directly impacts
the unit).
- When there is high humidity or a lot of steam
in the room.
In the above situation, without turning the unit
on, let the unit adjust to the room temperature
and wait 2–3 hours until condensation is gone.
• Do not block the cooling fan on the rear of
the unit.
• The unit may breakdown if cigarette smoke
or bug spray/vapour, etc. gets inside the
unit.
Cleaning
• This unit
- Wipe with a soft, dry cloth.
- Never use alcohol, paint thinner or benzine to
clean this unit.
- Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
• This unit’s lens
Use the Lens cleaner (optional) to clean the
unit’s lens.
Lens cleaner: RP-CL720AE
• This lens cleaner may not be for sale
depending on the region.
When requesting this unit for repair
The registration of the USB HDD may be
cancelled in the process of repairing this unit.
You can use the USB HDD again by
re-registering, but all recorded content already on
the USB HDD will be lost. In such cases, the
recorded content (data) cannot be recovered.
To dispose or transfer this unit
This unit may contain private information. Before
disposing of or transferring this unit, perform the
following to delete the data, including personal or
secret information:
- Format HDD (> 67, 72)
- Perform “Shipping Condition” (> 67, 81)
VQT4L31
11
DMRPWT635GL_eng.book 12 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
Control reference guide
Instructions for operations are generally described using the remote control.
Remote control



TV


VOL
DRIVE INPUT
SELECT AV
CH

PAGE
2abc 3def
1

4ghi 5jkl 6mno
7pqrs 8 tuv 9wxyz

0








PAUSE LIVE TV
EXIT
DIRECT NAVIGATO
R
GUIDE
OK
OPTION
RETURN
R
G
Y
B
REC
AUDIO
TEXT
STTL
PROG/CHECK CHAPTER TIME SLIP DISPLAY
SETUP


PLAY/x1.3
N E
C TIO M NU
FUN


REWIND LIVE TV
PAUSE
STOP


INTERNET
SLOW/SEARCH
SKIP
STATUS

RADIO/
TV
LAST VIEW

CH
DEL
MANUAL SKIP
-10s








+60s


1 Transmit the remote control signal
• Point it at remote control signal sensor on
this unit. (> 13)
2 Switch the unit from on to standby mode or
vice versa
3 Select drive (HDD, BD, SD or USB)
4 Select channels and title numbers, etc./Enter
numbers or characters
5 Switch to the previously watched channel
(> 23)
6 Basic operations for recording and play,
REWIND LIVE TV/PAUSE LIVE TV (> 25)
7 Show Information (> 24, 34, 38)
8 Selection/OK, Frame-by-frame (> 39)
12
VQT4L31
9 Show DIRECT NAVIGATOR, Top Menu,
Pop-up Menu (> 33, 39)
: Show OPTION menu (> 42, 48, 53)
; Colour buttons (Use in accordance with
instruction on the screen.)
< Start recording (> 27)
= Select audio (> 25, 39)
> Show the Timer Recording screen (> 30)
? Create chapter (> 39)
@ Show Setup menu (> 67)
A To delete unwanted recorded titles, timer
programmes, photos or music (> 41)
B TV operation buttons (> 18)
C Channel select (> 23)/Change pages in the
DIRECT NAVIGATOR screen etc.
D Show the VIERA Connect screen (> 59)
E Switching to the radio channel list (> 23)
F Start up a video communication (> 59)
G Exit the menu screen
H Show the TV Guide screen (> 24)
I Show the FUNCTION MENU screen (> 22)
J Return to previous screen
K Show subtitles (> 25, 39)
L Show Teletext (> 25)
M Show Playback Menu (> 64)
N Skip the specified time (> 39)
O Skip approx. 1 minute forward (> 39)
P Skip approx. 10 seconds backward (> 39)
Insert batteries
Insert so the poles (i and j) match those in the
remote control.
R6/LR6, AA
(Alkaline or manganese batteries)
DMRPWT635GL_eng.book 13 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
Display
Main unit

  

Pull to flip down the front panel.
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Open/close disc tray
Disc



USB memory
SD card
3 Disc tray
4 USB port
5 SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.

7 CALL LED
• The LED will light up when this unit receives
incoming call etc. of the video
communication. (> 59)
8 Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
9 Channel select (> 23)
: Start recording (> 27)
; Stop
< Start play
Display
1
2
3
COPY
HDDSD
BD
4 5
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
  
6 Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
SD USB
PLAY
6
7 8
9
1
2
3
4
5
6
SD card slot indicator
Copying indicator
Disc indicator
Drive (HDD, BD or SD) indicator
Remote control signal indicator
Main display section indicator
- Current time
- Playback counter
- Various messages (> 90)
7 Playback indicator
8 USB port indicator
9 Timer recording indicator
• This indicator lights up when the timer
recording standby is activated.
VQT4L31
13
DMRPWT635GL_eng.book 14 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
Connection
Basic connections
3D programmes can be played back when this unit is connected to a 3D compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
To the aerial
Aerial cable
RF coaxial cable
(supplied)
Cooling fan
This unit’s rear panel
HDMI cable
(supplied)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI
VHF/UHF
RF IN
TV’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
To connect and register the USB HDD (optional)
Refer to “Registering the external HDD (USB HDD)”. (> 61)
To connect the Communication Camera (optional)
Refer to “VIERA Connect (Enjoying Internet Service)”. (> 59)
About HDMI cable
If you use an optional HDMI cable, use the High Speed HDMI cables. Non-HDMI-compliant cables
cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable.
When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
14
VQT4L31
DMRPWT635GL_eng.book 15 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
When the unit is not to be used for a long
time
To save power, unplug it from the household
mains socket. This unit consumes a small
amount of power, even when the unit is in
standby mode.
[approx. 0.2 W (“Quick Start” is not activated
and “RF OUT ( Aerial Signal )” is set to
“Off”)]
• This unit cannot connect the TV that does not have the
HDMI terminal.
• The HDMI connection supports VIERA Link “HDAVI
Control” (> 63).
• You cannot connect this unit to DVI devices that are
incompatible with HDCP.
Depending on the device, images may not display properly
or at all when connecting with a DVI/HDMI switching cable.
(Audio cannot be output.)
• If you are connecting to a TV that is only compatible with
2 channel audio output, audio with 3 channels or more will
be down mixed and output as 2 channels, even if
connecting with an HDMI cable. (Some discs cannot be
down mixed.)
Amplifier/receiver connections
HDMI terminal
3D programmes can be played back when
this unit is connected to a 3D compatible
amplifier/receiver and a 3D compatible TV.
• You will not be able to view 3D programmes
with this connection if your amplifier/receiver
is not 3D compatible.
TV
HDMI
(ARC compatible)
HDMI
cable
HDMI OUT
Amplifier/
receiver
HDMI IN
(ARC compatible)
HDMI cable
(supplied)
• VIERA Link function is possible by connecting to a TV or
amplifier/receiver compatible with VIERA Link.
• When using a TV or an amplifier/receiver that does not
display “ARC compatible” on the HDMI terminal, it is
necessary to connect the TV and the amplifier/receiver with
a digital audio cable to enjoy the TV audio on the
amplifier/receiver.
VQT4L31
15
DMRPWT635GL_eng.book 16 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
Connection
∫ Amplifier/receiver not compatible with 3D
3D programmes can be played back when
this unit is connected to a 3D compatible
TV.
• This connection only supports up to 5.1ch.
DIGITAL AUDIO OUT terminal
OPTICAL IN
Amplifier/receiver
Optical digital audio cable
Amplifier/receiver
TV
HDMI IN
(ARC compatible)
• When you do not want the audio to be output from the TV,
set “HDMI Audio Output” to “Off” (> 67, 75).
HDMI cable
AUDIO OUT terminal
• Connect to terminals of the same colour.
HDMI
HDMI
AUDIO IN
R
L
Amplifier/receiver
(ARC compatible)
HDMI cable
(supplied)
• VIERA Link function is possible by connecting to a TV or
amplifier/receiver compatible with VIERA Link.
• When using a TV or an amplifier/receiver that does not
display “ARC compatible” on the HDMI terminal, it is
necessary to connect the TV and the amplifier/receiver with
a digital audio cable to enjoy the TV audio on the
amplifier/receiver.
16
VQT4L31
Audio cable
DMRPWT635GL_eng.book 17 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
Network connection
LAN cable connection
When this unit is connected to the network, you
can enjoy network functions (DLNA function,
VIERA Connect, etc.).
For details about connection method, refer to the
instructions supplied with the connected
equipment.
LAN (ethernet) cable
After you make the LAN cable/Wireless LAN
connection, the network setting is needed.
(> 20, Easy Network Setting)
∫ Precautions of Wireless LAN connection
The following limits are in place regarding the
usage of this unit. You must be aware of these
limits before using this unit.
Panasonic will in no way be responsible for any
incidental damage which may arise due to a
failure to obey these limits, or to any condition of
use or disuse of this unit.
• Data transmitted and received over radio
waves may be intercepted and monitored.
• This unit contains delicate electronic
components.
Please use this unit in the manner in which it
was intended and follow the following points:
- Do not expose this unit to high temperatures
or direct sunlight.
- Do not bend, or subject this unit to strong
impacts.
- Keep this unit away from moisture.
- Do not disassemble or alter this unit in any
way.
Broadband router, etc.
Internet
• Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
• Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
Wireless LAN connection
Internet
Wireless router, etc.
• For up-to-date compatibility information on your Wireless
router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
• The unit is not compatible with public wireless LAN
services.
VQT4L31
17
DMRPWT635GL_eng.book 18 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
Settings
TV operation buttons
The TV can be operated from the TV operation
buttons of the remote control.
• Perform the setting if you cannot operate the TV
with the TV operation buttons.
While pressing [TV Í], enter the code with
the number buttons.
TV


VOL
DRIVE INPUT
SELECT AV
CH
PAGE
2abc 3def
1
4ghi 5jkl 6mno
7pqrs 8 tuv 9wxyz
0
CH
INTERNET
RADIO/
TV
SLOW/SEARCH
LAST VIEW
SKIP
REWIND LIVE TV
PAUSE
STOP
STATUS
TV operation buttons
(> right)
PLAY/x1.3
PAUSE LIVE TV
EXIT
N E
C TIO M NU
FUN
DIRECT NAVIGATO
R
GUIDE
OK
OPTION
RETURN
R
G
Y
B
REC
AUDIO
TEXT
STTL
To exit the screen
Select and enter buttons
FUNCTION MENU (> 22)
To return to the previous
screen
PROG/CHECK CHAPTER TIME SLIP DISPLAY
SETUP
DEL
MANUAL SKIP
-10s
+60s
Setup (> 67)
Manufacturer and Code No.
Brand
Panasonic
AIWA
AKAI
BEKO
BENQ
BRANDT
BUSH
CENTREX
CURTIS
DAEWOO
DESMET
DUAL
ELEMIS
FERGUSON
Code
01/02/03/04
35
27/30
05/71/72/73/74
58/59
10/15
05
66
05
64/65
05
05
05
10/34
Brand
NEC
NOBLEX
NOKIA
NORDMENDE
OLEVIA
ONWA
ORION
PEONY
PHILCO
PHILIPS
PHONOLA
PIONEER
PROVIEW
Code
36
33
25/26/27/60/61
10
45
30/39/70
05
49/69
41/48/64
05/06/46
05
37/38
52
FINLUX
FISHER
61
21
PYE
RADIOLA
SABA
05
05
10
FUJITSU
FUNAI
GOLDSTAR
GOODMANS
GRADIENTE
GRUNDIG
HITACHI
IRRADIO
ITT
JVC
KDS
KOLIN
KONKA
LG
LOEWE
53
63/67
05/50/51
05
36
09
05/22/23/40/41
30
25
17/30/39/70
52
45
62
05/50/51
07/46
SALORA
SAMSUNG
SANSUI
26
32/42/43/65/68
05
05/28/79
05/19/20/47
SANYO
SCHNEIDER
SEG
SELECO
SHARP
SIEMENS
SINUDYNE
SONY
TCL
TELEFUNKEN
TEVION
THOMSON
TOSHIBA
WHITE
WESTINGHOUSE
21/54/55/56
05/29/30
05/69/75/76/77/78
05/25
18
09
05
08
31/33/66/67/69
10/11/12/13/14
52
10/15/44
16/57
05
MAG
52
METZ
MITSUBISHI
MIVAR
24
YAMAHA
18/41
• If the brand of your TV is not listed or the code
number is invalid for the TV, this remote control
is not compatible with your TV.
• If your TV brand has more than one code listed, select the
one that allows correct operation.
18
VQT4L31
DMRPWT635GL_eng.book 19 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
4
Easy Setting
1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
Set “Quick Start” to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
Quick Start
On
Off
2
3
Timer Setting for Quick Start
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
Follow the on-screen instructions and
perform the settings.
• When the Download from TV screen
appears, the setting information on the TV
is acquired by this unit. (> 63)
Auto Setup starts.
(This operation may take some time.)
e.g.,
Digital TV Auto Tuning
Progress
CH 6
This will take about 3 minutes.
Channel Name
RF Ch
35
35
6:00 AM
11:00 PM
• On
It is possible to start quickly from standby
mode.
• Off
Power consumption in standby mode is
minimized. (> 94)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start
“Quick Start” is activated when the set time
comes. (If the clock has not been set, this
function is not activated at all hours.)
69
Type
Digital TV
Digital TV
Quality
10
10
Digital TV: 2
Searching
RETURN
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (> 79, Clock).
VQT4L31
19
DMRPWT635GL_eng.book 20 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
Settings
5
If the TV aspect setting screen appeares:
Select the item to match the type of TV
connected.
For details, refer to “TV Aspect”. (> 74)
Easy Network Setting
After completing “Easy Setting”, you can continue
with “Easy Network Setting”.
1
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
• Select “Yes” to proceed to “Easy Network
Setting”. (> right)
• Select “No” to finish the Easy Setting.
Select “Wired” or “Wireless”, then press
[OK].
Easy Network Setting
Settings and tests for connection required
for home network and the Internet will be
conducted.
First, please select a connection mode.
Current setting
: Wired
LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.
Wireless LAN connection:
Select “Wireless”.
Wired
Wireless
To stop partway
Press [RETURN
OK
].
To restart setup
1 Press [SETUP]. (> 18)
2 Select “Auto Setup” in “Digital TV Tuning”,
then press [OK].
3 Select “Yes”, then press [OK].
RETURN
2
To confirm that channels have been tuned
correctly
Refer to “Using Channel List”. (> 23)
“Wireless” connection:
• Before beginning wireless connection
setup
Obtain your Network name (SSID).
An SSID (Service Set IDentification) is a
name used by wireless LAN to identify a
particular network. Transmission is
possible if the SSID matches for both
devices.
- Wireless Settings
- Home Network Connection Check
- Home Network function
- Internet Connection Test
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
3
20
VQT4L31
Follow the on-screen instructions and make
the following confirmation and settings.
“Wired” connection:
- Home Network Connection Check
- Home Network function
- Internet Connection Test
When “Easy Network Setting is finished.”
appears.
Press [OK].
DMRPWT635GL_eng.book 21 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
Connection method to wireless access point
Search for wireless network:
1 Select “Search for wireless network”, then
press [OK].
2 The available wireless networks will be
displayed. Select your network name and
press [OK].
- If your Network name is not displayed search
again by pressing the red button on the
remote control.
- Stealth SSID will not be displayed. Enter
manually by using “Wireless Settings”.
(> 67, 76)
• If your wireless network is encrypted, Encryption
Key Input Screen will be displayed.
Input the encryption key of your network.
WPS (PUSH button):
If your Wireless router supports WPS (PUSH
button), you can easily perform the settings by
pressing WPS button on it.
WPS (Wi-Fi Protected Setup™) is a standard that
facilitates settings relating to the connection and
security of wireless LAN devices.
1 Select “WPS (PUSH button)”, then press [OK].
2 Press WPS button or corresponding button of
Wireless router until the lamp starts flashing.
e.g.,
• Wi-Fi Protected Setup™-compatible
Wireless router may have the mark.
• For details, refer to the operating instruction
of Wireless router.
3 Press [OK].
When you experience problems
Refer to “When you experience problems with
Easy Network Setting”. (> 92)
To restart Easy Network Setting
1 Press [SETUP]. (> 18)
2 Select “Easy Network Setting” in “Network”,
then press [OK].
To redo settings individually
If “Easy Network Setting” did not work properly or
when you change the settings individually,
perform the following steps:
1 Press [SETUP]. (> 18)
2 Select “Network Settings” in “Network”, then
press [OK].
3 Refer to “Network Settings”. (> 76)
Check security before using Home Network
function
If you set “Home Network function” to “On”, all
connected devices on the same network can
access this unit. Ensure that the router for your
home network has adequate security system to
prevent unauthorized access.
• Refer to the operating instructions of the hub or router.
• If you set “Home Network function” to “On”, the setting for
“Quick Start” is fixed to “On”.
• Do not use this unit to connect to any wireless network for
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
not have usage rights may be displayed; however, using
these networks may be regarded as illegal access.
• After performing network settings on this unit, the settings
(encryption level, etc.) of the Wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of Wireless router.
• Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
VQT4L31
21
DMRPWT635GL_eng.book 22 ページ
2013年2月4日 月曜日 午後1時25分
Getting started
FUNCTION MENU screen
You can easily access the desired functions, such
as playback, timer recording, the unit’s settings
etc. via the FUNCTION MENU.
1
Press [FUNCTION MENU].
FUNCTION MENU
HDD
Playback Contents
TV Guide
Timer Recording
Network
Others
Drive Select
Disc / SD Card / USB / USB HDD
OK
RETURN
2
Select the item, then press [OK]
e.g.,
Playback Contents
TV Guide
Press OK
Timer Recording
Press
RETURN
Video
Photo
Music
FUNCTION MENU list
FUNCTION MENU
Playback Contents
Video (> 33)
Video (AVCHD) (> 36)
Video (MP4) (> 36)
Photo (> 46)
Music (> 50)
Top Menu (> 36)
Menu (> 36)
TV Guide (> 24)
Timer Recording (> 29)
Network
Home Network (DLNA Client) (> 57)
Home Network (Media Renderer) (> 58)
Network Service (> 59)
Remote Recording (> 31)
Others
Playlists (> 36)
Copy Video ( AVCHD ) (> 54)
Copy Video ( MPEG2 ) (> 55)
Copy New Photos (> 49)
SD Card Management (> 60)
BD-Video Data Management (> 37)
Setup (> 67)
• You can change the unit’s settings of
Digital TV Tuning, Sound, Display,
Connection, Network etc. in the Setup
menu.
Drive Select
HDD
Blu-ray Disc / DVD
SD Card
USB Device
USB HDD
• Selectable items will change depending on the type and
status of the media.
22
VQT4L31
DMRPWT635GL_eng.book 23 ページ
2013年2月4日 月曜日 午後1時25分
Watching broadcasts
Watching
broadcasts
Watching broadcasts
Instructions for operations are generally
described using the remote control. (> 12)
Press [CH W X] to select the channel.
• You can also select the channel by the
following operations
- Using number buttons.
- Using Channel List (> right)
- Using TV Guide system (> 24)
- Using channel information (> 24)
Using Channel List
You can select from the list of channel names.
1
Press [OK].
All Digital Channels
1
2
3
4
5
6
7
Select
View
Page up
CH
RETURN
To switch to the channel you have previously
watched
Press [LAST VIEW
].
• This function will work only for the channels you
have watched for more than 10 seconds.
To switch to the radio channels or to the all
channels
Press [RADIO/TV].
Page down
Channel names
2
Select the channel, then press [OK].
To edit the channel list
Refer to “Channel List”. (> 70)
• When you are watching the 3D programme, subtitles and
TV Guide, etc., may not display correctly depending on the
settings. (> 40, 3D Type, Signal Format)
About the PIN for parental control
If you have set a ratings level (> 70, Child Lock
( Parental Rating )), you may be asked to enter
the PIN. In that case, enter the 4-digit PIN with the
number buttons by following the on-screen
instructions.
• Make a note of the PIN you have decided on
in case you forget it.
• PIN can be changed via “PIN Entry”. (> 80)
VQT4L31
23
DMRPWT635GL_eng.book 24 ページ
2013年2月4日 月曜日 午後1時25分
Watching broadcasts
Watching broadcasts
Using TV Guide system
1
Using channel information
While watching a programme
Press [STATUS ].
Press [GUIDE].
TV Guide screen appears.
HDD
Remain 71:20
TV Guide
TUE 01.01.2013 8:05 AM
Category: All Digital Channels
1
8:00 AM - 9:45 AM
TUE 01.01
8:00 AM
8:30 AM
9:00 AM
9:30 AM
10:00 AM
10:30 AM
10:30 AM
1
9:00 AM - 11:00 AM
All Digital Channels
Now
Rating: G
OK
Timer Rec.
2
3
-24 hours
+24 hours
Set timer
Change category
Dolby D
Page Up
Information
RETURN
Page Down
Category
Select the programme, then press [OK].
Select “View”, then press [OK].
Channel information appears.

e.g.,
10:30 AM
1
9:00 AM - 11:00 AM
All Digital Channels
Now
Rating: G
Page up/down
Press [CH W X].
Change category
Dolby D
 
To view a programme list for another day
Press the green button (Previous) or the yellow
button (Next).
To see programme information
Press [STATUS
Set timer
].
To retrieve the programme data for the area
where data have not been acquired
Select the area, then press [STATUS ].
• Some broadcasters may not send the
programme data. You cannot retrieve the data
from them.
To set a timer Recording using the TV Guide
System
Refer to “Timer recording”. (> 29)
• Selection of channel is made easy by creating a Favourite
of the channels you watch often. (> 69, Favourites Edit)
1
2
3
4
5
Current Category
Set timer (> 31)
Subtitle
Teletext
Multiple audio
To show detailed information
Press [STATUS
] again.
To hide the information screen
Press [EXIT
].
To change Category
Press the blue button.
• To register your favourite channels
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Favourites Edit”, then press [OK].
4 Refer to “Favourites Edit”. (> 69)
To switch between the current programme
and the next programme
Press [2, 1].
To switch to another channel
Press [3, 4], then press [OK].
24
VQT4L31
DMRPWT635GL_eng.book 25 ページ
2013年2月4日 月曜日 午後1時25分
Watching broadcasts
Operations while watching broadcast
To show subtitle
When “
(> 24)
” appears in channel information
Press [STTL
].
• Press again to hide subtitle.
Switching audio
Press [AUDIO].
• Audio will switch according to the contents of
the programme every time it is pressed.
REWIND LIVE TV/PAUSE LIVE TV
This unit temporarily saves a live TV programme
you are watching with this unit’s tuner on HDD.
REWIND LIVE TV
You can rewind live TV programme to the point
where temporary save has started (up to
1.5 hours).
PAUSE LIVE TV
You can pause live TV programme and restart
watching from the paused position.
1
REWIND LIVE TV:
Press [SLOW/SEARCH 6] to rewind.
To show Teletext
When “
(> 24)
PAUSE LIVE TV:
Press [PAUSE ;] to pause.
• The maximum amount of the temporary
save is 1.5 hours.
” appears in channel information
1 Press [TEXT
].
2 Use [3, 4, 2, 1], number buttons or colour
buttons, etc. according to on-screen
instructions.
• You can change the display mode. (> 67, 74, Teletext)
While watching TV
2
When you want to resume:
Press [PLAY/a1.3 1].
• You can perform search or Quick View, etc.
• If temporary save stops, playback will be
performed by that point.
Aspect
You can switch the screen mode.
Refer to “Switching the aspect ratio of the
screen”. (> 83)
VQT4L31
25
DMRPWT635GL_eng.book 26 ページ
2013年2月4日 月曜日 午後1時25分
Watching broadcasts
Watching broadcasts
Display information
To stop REWIND LIVE TV or PAUSE LIVE TV
1 Press [STOP ∫].
2 Select “Yes”, then press [OK].
While pausing or rewinding a broadcast:
Press [STATUS
Pause
].
8:05 AM
9:35 AM
8:50 AM


• Press [STATUS

Play 8:50.50 AM

1 The time that you can rewind the live
programme.
2 The amount of time temporarily saved on
HDD.
3 The time of the current playback position.
VQT4L31
Press [EXIT
].
] again.
8:50:55 AM 01.01.2013
26
To hide the display information
• The unit cannot rewind and play more than 1.5 hours prior
to the current time.
• Temporary save stops in the following cases:
- When switching to other channels or other screen
- When recording of the watching programme is started
- When two programmes simultaneous recording is started
- When performing PAUSE LIVE TV or REWIND LIVE TV
for more than 8 hours (This may vary depending on the
HDD free space.)
• These functions do not work in the following cases:
- When the clock is not set
- While recording two programmes simultaneously
- While copying
- While watching a programme being recorded
- When a radio programme is selected
- REWIND LIVE TV:
When “REWIND LIVE TV” is set to “Off” (> 72)
• PAUSE LIVE TV:
You can operate this unit with the TV remote control by
using VIERA Link (> 63).
Refer to the TV operating instructions.
DMRPWT635GL_eng.book 27 ページ
2013年2月4日 月曜日 午後1時25分
Recording
Recording
Recording TV programmes
The titles can only be recorded to built-in
HDD and cannot be copied from built-in HDD
to the media other than USB HDD.
• This operation will only record to built-in HDD.
• This unit can record two programmes being
broadcasted at the same time.
1
2
3
Select the channel to record.
To set the recording time
1 Select “Recording Time” or “Continuous
recording” in step 3 (> left).
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
• You can select the recording time with
[2, 1].
Continuous recording:
The recording is continued until you press
[STOP ∫].
2 Press [OK].
Press [REC ¥].
Recording starts.
• “REC1” or “REC2” will light on the unit’s
display.
Select “Automatic Stop”, then press
[OK].
• One touch recording (OTR)
Recording stops automatically when the
programme ends.
REC1/OTR
8:00 AM - 8:45 AM
• One recording will terminate when simultaneous recording
is being done and timer recording starts.
• Teletext will not be recorded.
• Following contents or media cannot be played back while
recording.
- 3D BD-Video (playback in 3D)
- Xvid and MKV file
- photo
- USB HDD (For data files) and USB memory
• Copying cannot be performed while recording.
• When “Automatic Standby after OTR” is set to “On” (> 78),
this unit is turned to standby mode if this unit is not
operated for approximately 5 minutes after completing
“Automatic Stop” or “Recording Time”.
Automatic Stop at 8:45 AM
Recording Time
30 min
Continuous recording
• You can also select “Recording Time” or
“Continuous recording”. (> right)
VQT4L31
27
DMRPWT635GL_eng.book 28 ページ
2013年2月4日 月曜日 午後1時25分
Recording
Recording TV programmes
Operation during Recording
To check the recording programme
Press [STATUS
].
e.g., While recording two programmes simultaneously
HDD
REC1/OTR AUTO
Recording programme
displayed on the TV
To pause recording
After displaying the recording programme, press
[PAUSE ;].
• Press again to restart recording.
(A title is not split into separate titles.)
• Timer recording programme cannot be paused.
To record two programmes simultaneously
While recording, perform steps 1–3 on page 27.
REC2
Recording programme not displayed on the TV
To stop recording
Simultaneous rec and play
Press [STOP ∫].
When recording one programme:
If the following screen appears
Stop Recording
1
Recording of this programme is in progress.
Stop this recording ?
Yes
• Channel can only be switched between the recording
programmes.
You can play the recording title from the beginning
or the titles previously recorded to the HDD.
1 Press [DIRECT NAVIGATOR].
• If the DIRECT NAVIGATOR screen of music
is displayed, press the red button, then
select “VIDEO”.
No
Channel
Date
Title Name
OK
RETURN
Start Time 9:00 AM
Prog.Type: Movies
Select “Yes”, then press [OK].
When recording two programmes:
If the following screen appears
Stop Recording
2 recordings are in progress.
Which recording would you like to stop ?
1
2
OK
RETURN
1 Select the programme, then press [OK].
2 Select “Yes”, then press [OK].
28
VQT4L31
Play
RETURN
PHOTO / MUSIC
Rec time
0:01
Page
OPTION
Delete
Select
“[” is displayed on the recording programme.
2 Select the title, then press [OK].
DMRPWT635GL_eng.book 29 ページ
2013年2月4日 月曜日 午後1時25分
Recording
Timer recording
• This operation will only record to built-in HDD.
• This unit can record two programmes being
broadcasted at the same time.
1
Operation during Recording
Refer to “Operation during Recording”. (> 28)
Press [GUIDE].
TV Guide screen appears.
TV Guide
TUE 01.01.2013 8:05 AM
Category: All Digital Channels
8:00 AM - 9:45 AM
TUE 01.01
8:00 AM
8:30 AM
9:00 AM
9:30 AM
10:00 AM
OK
Timer Rec.
2
-24 hours
+24 hours
10:30 AM
• Some broadcasters may not send programme information.
When programme information is not displayed correctly,
use manual timer recording. (> 30)
• You can set the start and finish time to make the timer
recording work successfully. (> 67, 72, Timer Record Start
Buffer, Timer Record Stop Buffer)
Page Up
Page Down
Information
RETURN
To cancel a timer recording on the TV Guide
screen
1 Select the programme to cancel, then press
the red button.
2 Select “Timer Rec Cancel”, then press [OK].
(“F” disappears)
Category
Select the programme, then press the
red button.
The timer icon “F” (red) is displayed.
• If on-screen instructions are displayed,
follow them.
To use TV Guide system
Refer to “Using TV Guide system”. (> 24)
To edit the timer recording on the TV Guide
screen
1 Select the programme to edit, then press the
red button.
2 Select “Timer Rec Edit”, then press [OK].
3 Go to step 3 on page 30.
To select the programmes of a specific
category
1 On the TV Guide screen:
Press the blue button.
2 Select the item, then press [OK].
To return to the previous TV Guide list
Select “All Digital Channels” in step 2.
• Category may not be assigned correctly depending on the
programme information.
VQT4L31
29
DMRPWT635GL_eng.book 30 ページ
2013年2月4日 月曜日 午後1時25分
Recording
Timer recording
Timer recording options
Manually programming timer
recording
1
Select the items and change the items.
Press [PROG/CHECK].
e.g.,
Timer Recording
Timer Recording
Remain HDD
30:30
OK
RETURN
2
3
4
Delete
Total 0/32
Turn
Timer Off
Info
Channel Day/Date
1
TUE 01.01
Space
OK
RETURN
Page Up
Page Down
Select “New Timer Programme”, then press
[OK].
Select the items and change the items.
(> right, Timer recording options)
Press [OK].
The timer programme is stored.
Timer Recording
Remain HDD
30:30
TUE 01.01.2013 8:05 AM
Schedule
Space
WED 01.01
8:00 AM - 9:00 AM
OK
Channel Name
Programme Name
New Timer Programme
To confirm and edit the timer programme
Refer to “To confirm and edit a timer programme”.
(> 32)
Operation during Recording
Refer to “Operation during Recording”. (> 28)
30
VQT4L31
Remain HDD
30:24
TUE 01.01.2013 8:05 AM
TUE 01.01.2013 8:05 AM
Channel Name
Schedule
New Timer Programme
Start
8:00
Category
Stop
9:00
Title Name
Date/
Weekly
Channel
• You can select Category with the red button.
Day/Date
• You can select “Date” or “Weekly” by pressing
the green button.
Start/Stop
• Press and hold [3, 4] to alter in 15-minute
increments.
Auto Renewal Recording
(Only daily/weekly timer recording)
The unit will record the new programme over the
old one.
1 Select “Renew”.
2 Select “ON”.
Title Name
1 Select “Title Name”, then press [OK].
2 Refer to “Entering text”. (> 83)
DMRPWT635GL_eng.book 31 ページ
2013年2月4日 月曜日 午後1時25分
Recording
Timer recording from channel
information
Notes on timer recording
You can make timer recording of the current or
next programme.
1
While watching a programme
Press [STATUS ].
e.g.,
1
10:30 AM
9:00 AM - 11:00 AM
Now
Rating: G
2
3
4
All Digital Channels
Set timer
Change category
Dolby D
Display the channel information of a
programme to record.
• Switch the programme with [2, 1].
Press the yellow button.
Go to step 3 on page 30.
• You can enter up to 32 programmes within a
month in advance. (Each daily or weekly
programme is counted as one programme.)
• Even if you switch the unit to standby mode
during the timer recording, the recording is
continued.
• When you programme successive timer
recordings to start, about last 1 minute of earlier
programme will not be recorded.
• Timer recording will not start while:
- copying HD Video (AVCHD) from USB device
or SD card
- copying photos/music
- formatting
• When “Pure Sound mode” is activated, timer
recording does not start during playback of
BD-Video, DVD-Video or music CD. (> 71)
Remote recording from outside
You can make a timer recording from a smart
phone or a PC, etc. away from home. (You must
register to a service to use this function.)
For details, please check the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
• However, as of February 2013, the service has
not yet been launched.
Preparation
• Network connection (> 17, 20)
• Remote Recording Function Settings (> 67, 77)
• This unit will be always connected to the internet, so we
recommend that you subscribe to a flat-rate data plan with
an always-on connection.
• Please note that a regular maintenance or unexpected
trouble may interrupt the service, and that the service
content may be changed or revoked and operation menu
screens may be changed with or without a prior notice.
VQT4L31
31
DMRPWT635GL_eng.book 32 ページ
2013年2月4日 月曜日 午後1時25分
Recording
Timer recording
To confirm and edit a timer
programme
1
Screen icons
Press [PROG/CHECK].
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
e.g.,
Timer Recording
Remain HDD
30:30
Channel Name
TUE 01.01.2013 8:05 AM
Schedule
Space
TUE 08.01
11:00 AM - 11:45 AM
TUE 08.01
10:00 AM - 11:50 AM
TUE 08.01
11:30 AM - 1:00 AM
TUE 01.01
8:00 AM - 10:45 AM
A part or all of the programme will not be
recorded since the programme is
overlapping.
OK
OK
New Timer Programme
OK
RETURN
2
Total 3/32
Turn
Timer Off
Delete
The HDD is full.
Info
Select the programme, then perform the
operations.
The recording of the programme was not
completed because of some reason.
To deactivate a timer programme
Press the red button.
• The timer icon “F” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
Auto Renewal Recording (> 30) is set.
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 30)
3 Press [OK].
To show programme information
Press [STATUS
].
To exit the timer recording list
Press [EXIT
32
Copy-protected programme
It was not recorded.
Page Up
Page Down
VQT4L31
].
OK
Displayed if the recording can fit in the
remaining space
Daily or weekly timer programme is set.
(Date)
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (> 96)
- programmes are deactivated, etc.
DMRPWT635GL_eng.book 33 ページ
2013年2月4日 月曜日 午後1時25分
Playing back video
Playing
back video
Playing titles on the HDD
DIRECT NAVIGATOR (VIDEO)
screen
§
§
1
“For recorded titles” only
Press [DRIVE SELECT] to select “HDD”,
then press [DIRECT NAVIGATOR].
• If the DIRECT NAVIGATOR screen of
photo or music is displayed, press the red
button, then select “VIDEO”.
Screen icons
[
Protected title
e.g.,

DIRECT NAVIGATOR
HDD
All
Not Viewed
t

Grouped Titles
Channel
Date
Drama
Sport
Grouped titles
Titles
Title has not yet been played
AVCHD
Title Name
Start Time 9:00 AM Rec time
Prog.Type: Movies
OPTION
Title is recorded using a different
encoding system from that of the
unit.
Change the “TV System” (> 67, 74).
0:01
Page 003/003
Play
RETURN
Delete
Select
PHOTO / MUSIC
Page Up
Page Down
Radio programme
Copy
1 Tab (> 34)
2 Programme type
• [USB_HDD] When connecting registered
USB HDD, “USB HDD” tab and
registration number appears.
Select “USB HDD” tab.
&
3D contents
• This icon will not display even with
3D programmes when a broadcast
programme is recorded.
Recorded in 1080/50p contents
Recorded in 1080/60p contents
e.g.,
DIRECT NAVIGATOR
Grouped Titles
VIDEO
Time Remaining 45:54
Registration number 1
USB-HDD
USB-HDD
All
Not Viewed
Movies
Drama
Sport
AVCHD
2
Title was not recorded due to
recording protection
Title cannot be played
(When data is damaged etc.)
VIDEO
Time Remaining 45:54
Movies
Currently recording programme
Title is restricted by Child Lock
( Parental Rating ) (> 70).
Recording did not complete as the
timer recording has started.
Select the title, then press [OK].
Playback starts.
Resume play function
If the following screen appears, select the point to
start playback.
Playback
Where do you want to start playback from ?
Last Stopped
Beginning
OK
RETURN
VQT4L31
33
DMRPWT635GL_eng.book 34 ページ
2013年2月4日 月曜日 午後1時25分
Playing back video
Playing titles on the HDD
Tab
Switching the appearance
Titles will be categorised automatically.
You can quickly find the recorded titles by
selecting the tab.
1 Press [OPTION].
2 Select “Grouped Titles” or “All Titles”, then
press [OK].
Grouped Titles:
Two or more titles recorded in the daily/weekly
timer recording mode are bundled and
displayed as one item.
To select the tab
Press [2, 1].
To change the displayed programme type tab
1 Select the programme type, then press the
green button.
2 Select the item, then press [OK].
All Titles:
Displays all titles.
Playing back grouped titles
To change the programme type of title
Refer to “Changing programme type of title”.
(> 43)
Switching to the PHOTO or MUSIC screen
1 Press the red button.
2 Select “PHOTO” or “MUSIC”, then press [OK].
Showing Information
Select the title, then press [STATUS
34
VQT4L31
].
1 On the Grouped Titles screen:
Select the item marked with
.
2 When playing all titles:
Press [PLAY/a1.3 1].
When playing the individual title:
Press [OK] and select the title, then press
[OK].
DMRPWT635GL_eng.book 35 ページ
2013年2月4日 月曜日 午後1時25分
Playing back video
Editing the grouped titles
1 Select the title or the group, then press the
yellow button.
• A check mark is displayed. Repeat this step.
• Press the yellow button again to cancel.
• If you perform “Remove”, select the title in
the group.
2 Press [OPTION].
3 Select the item, then press [OK].
Create Group:
Selected titles are bundled to form a group.
Select “Create”, then press [OK].
Playback from Chapter View
Regarding chapters
You can divide a title into multiple chapters. Each
section between the division points (Chapter
Marks) becomes a chapter.
Chapter
Title
Chapter Marks
Release Grouping:
All the titles in the group are released.
Select “Release”, then press [OK].
• Chapter Creation
This unit can create chapters automatically
while recording broadcasting. (> 72)
Remove:
Selected titles are removed from the group.
Select “Remove”, then press [OK].
1 Select the title, then press [OPTION].
2 Select “Chapter View”, then press [OK].
e.g., [HDD]
PLAY
Press OK to start playing from
the selected chapter.
Selected chapter can be edited
via OPTION.
Press RETURN to go back to
previous menu.
Changing the group name
1
2
3
4
Select the group, then press [OPTION].
Select “Edit”, then press [OK].
Select “Enter Title Name”, then press [OK].
Refer to “Entering text”. (> 83)
0:12.29
001
0:00.00
OK
RETURN
OPTION
Edit Chapter Mark
Page 001/001
Delete
Select
3 Select the chapter, then press [OK].
To edit the chapter in Chapter View
Refer to “Editing chapters”. (> 44)
VQT4L31
35
DMRPWT635GL_eng.book 36 ページ
2013年2月4日 月曜日 午後1時25分
Playing back video
Playing titles on the media
§
Menu screen
Selecting screen for each operation is displayed
when the media is inserted, and you can access
the operation screen easily.
§
1
“For data files” only
e.g., [USB]
USB
Insert the media.
Depending on the type of the media, play
starts from the specified position, or the
screen appears.
Play Video
View Photos
Play / Copy Music ( MP3 )
Copy Video ( AVCHD )
Copy Video ( MPEG2 )
Copy New Photos
USB device is inserted.
• AVCHD: If the menu screen is not
displayed
Press [PLAY/a1.3 1].
2
When the DIRECT NAVIGATOR screen or
menu screen etc., appears:
Select the item or title, then press [OK].
• Repeat this step if necessary.
Playback starts.
To play back the playlist created on other
equipment
1 Press [FUNCTION MENU].
2 Select “Playlists” in “Others”, then press [OK].
3 Select the playlist, then press [OK].
OK
RETURN
• Display items differ depending on what is
recorded in each media.
If the menu screen is not displayed, display it
by performing the following operation.
1 While stopped
Press [OPTION].
2 Select “Drive Select”, then press [OK].
3 Select the media, then press [OK].
Video list screen
e.g.,
Videos
USB
\ Video \
Parent Folder
Folder 01
Folder 02
video01.mkv
video02.mkv
• Some files may not be played back, depending on the video
resolution and frame rate condition.
video03.mkv
video04.mkv
OK
RETURN
Page 0001 / 0003
Page Up
Page Down
Screen icons:
Folder
Titles
Move to the parent folder
36
VQT4L31
DMRPWT635GL_eng.book 37 ページ
2013年2月4日 月曜日 午後1時25分
Playing back video
Notes for BD-Live discs
DIRECT NAVIGATOR screen
e.g.,
DIRECT NAVIGATOR
BD-RE
All
All Titles
Channel
[BD-V]
BD-Live allows you to enjoy more functions such
as subtitles, exclusive images and online games
by connecting this unit to the Internet.
VIDEO
Date
Title Name
29.10
Start Time 10:46 AM Rec time 0:10(HM)
04.10
04.10
29.10
Page 003/003
Play
RETURN
Preparation
1 Perform network connection and settings.
(> 17, 20)
2 Insert a disc.
Page Up
Page Down
OPTION
PHOTO
Switching to the PHOTO screen
Press the red button.
The screen switches to “PHOTO”.
For the playback method, refer to the
instructions for the disc.
Showing Information
Delete BD-Video data
Select the title, then press [STATUS
].
Playback from Chapter View
1 Select the title, then press [OPTION].
2 Select “Chapter View”, then press [OK].
3 Select the chapter, then press [OK].
• Regarding chapters
Refer to “Regarding chapters”. (> 35)
DIRECT NAVIGATOR (AVCHD) screen
If you no longer need BD-Live data recorded on
the built-in HDD, you can delete data with the
following operation.
1 Press [FUNCTION MENU].
2 Select “BD-Video Data Management” in
“Others”, then press [OK].
3 Select “Delete BD-Video data”, then press
[OK].
4 Select “Yes”, then press [OK].
5 Select “Start”, then press [OK].
6 Press [OK].
[SD]
e.g.,
DIRECT NAVIGATOR
Video ( AVCHD )
• The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc.
• You can restrict Internet access when BD-Live functions are
used (> 67, 71, BD-Live).
• When “Pure Sound mode” is set to “On”, this unit cannot
use BD-Live functions. (> 71)
SD Card
Rec time
0:30.41
No.
Date
Day
Time
001
002
003
004
005
006
007
008
009
010
01.01
01.01
02.01
03.01
03.01
04.01
05.01
05.01
06.01
06.01
WED
WED
FRI
SUN
SUN
MON
FRI
FRI
FRI
FRI
9:00 AM
5:00 AM
9:30 AM
10:00 AM
11:30 AM
2:00 AM
11:00 AM
10:00 AM
3:45 AM
9:00 AM
Title Name
Page 03/03
OK
OPTION
Page Up
Page Down
RETURN
Showing Information
1 Select the title, then press [OPTION].
2 Select “Information”, then press [OK].
About screen icons on the DIRECT
NAVIGATOR
Refer to “Screen icons”. (> 33)
VQT4L31
37
DMRPWT635GL_eng.book 38 ページ
2013年2月4日 月曜日 午後1時25分
Playing back video
Operation during play
Quick View
[HDD] [USB_HDD] (For recorded titles) [SD]
Press and hold [PLAY/a1.3 1].
• Press again to return to normal speed.
• Depending on the media and the type of file, some
operations may not be possible.
• Depending on the media, it may take time for the menu
screen, pictures, sound, etc. to start.
• Discs continue to rotate while menus are displayed. Press
[STOP ∫] when you have finished playback to protect the
unit’s motor, your TV screen, etc.
Search
Press [SLOW/SEARCH 6] or
[SLOW/SEARCH 5].
• Press [PLAY/a1.3 1] to restart play.
• The speed increases up to 5 steps.
([+R] [+RW]: Up to 3 steps)
• Xvid, MKV, MP4 and MPEG2 ([USB_HDD] [USB]): Audio is
not heard during all levels search.
General operations
Status messages
Press [STATUS
] twice.
Pause
e.g.,
Press [PAUSE ;].
• Press [PLAY/a1.3 1] to restart play.
8:05:50 AM 01.01.2013
Remain HDD
T1
0:05.14
0:30.00
Stop
Press [STOP ∫].
Resume play function
Press [PLAY/a1.3 1] to restart from the stopped
position.
• The resume play function does not work depending on the
media.
• Discs: Only previous stopped position is memorized. The
position may be cleared if the tray is opened or the unit is
switched to standby mode.
38
VQT4L31
Slow-motion
While paused, press [SLOW/SEARCH 6] or
[SLOW/SEARCH 5].
• Press [PLAY/a1.3 1] to restart play.
• The speed increases up to 5 steps.
• Xvid, MKV, MP4 and MPEG2 ([USB_HDD] [USB]):
Slow-motion is not effective.
• [BD-V], AVCHD ([DVD-R] [SD]): Forward direction
[SLOW/SEARCH 5] only.
DMRPWT635GL_eng.book 39 ページ
2013年2月4日 月曜日 午後1時25分
Playing back video
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
• Each press shows the next frame.
• Press and hold to change in succession forward
or backward.
• Press [PLAY/a1.3 1] to restart play.
• Xvid, MKV, MP4 and MPEG2 ([USB_HDD] [USB]):
Frame-by-frame is not effective.
• [BD-V], AVCHD ([DVD-R] [SD]): Forward direction [1] (;1)
only.
Skipping the title or chapter
Press [SKIP :] or [SKIP 9].
• [HDD] [USB_HDD] (For recorded titles): It will not skip the
title. But the title in the grouped titles will be skipped. (> 34)
To create Chapter Marks
[HDD] [USB_HDD] (For recorded titles)
During the playback or pause
Press [CHAPTER].
Manual Skip
To delete the Chapter Mark
Skip forward 1 minute:
Press [MANUAL SKIP +60s].
[HDD] [USB_HDD] (For recorded titles)
1 While paused
Press [SKIP :] or [SKIP 9] and skip to
the location you want to delete.
2 Press [CHAPTER].
3 Select “Yes”, then press [OK].
Skip backward 10 seconds:
Press [MANUAL SKIP -10s].
• Xvid and MKV: Manual Skip is not effective.
Skipping the specified time
1 Press [TIME SLIP].
2 Select the time with [3, 4].
• Press and hold [3, 4] to change the time by
10-minute.
3 Press [OK].
• Play skips the specified time.
• [BD-V] [DVD-V], Xvid, MKV, AVCHD, MP4 and
MPEG2 ([USB_HDD] [USB]): [TIME SLIP] is not effective.
To display menu
[BD-V] [DVD-V]
1 Press [OPTION].
2 Select “Playback Menu”, then press [OK].
3 Select “Top Menu”, “Pop-up Menu” or “Menu”,
then press [OK].
Changing audio
Press [AUDIO].
• It will switch depending on the contents
recorded every time it is pressed.
Switching subtitles
[HDD] [USB_HDD] (For recorded titles) [BD-RE]
[BD-R]:
1 Press [STTL
].
2 Select “On” or “Off”.
• If you want to switch the subtitle language,
select it in the Disc menu (> 64).
[BD-V] [DVD-V], Xvid and MKV:
Display with “Subtitles” in the Disc menu (> 64).
Aspect
You can switch the screen mode.
Refer to “Switching the aspect ratio of the
screen”. (> 83)
VQT4L31
39
DMRPWT635GL_eng.book 40 ページ
2013年2月4日 月曜日 午後1時25分
Playing back video
Operation during play
3D video playback
Preparation
Connect 3D compatible TV to this unit. (> 14)
• Perform the necessary preparations for the TV.
Play back following the instructions displayed
on the screen.
Preparatory 3D settings
Perform the following settings as necessary.
3D BD-Video Playback
It is also possible to play back 3D discs in 2D
(conventional video). (> 67, 71)
3D Type
If 3D video cannot be played back in 3D, you may
be able to play it in 3D by changing the setting.
(> 67, 74)
3D AVCHD Output
If 2D AVCHD video is recognised as 3D video and
cannot be played back correctly, you may be able
to play it by changing the setting. (> 67, 74)
3D Playback Message
Hide the 3D viewing warning screen. (> 67, 74)
Graphic Display Level
Adjust the 3D position for the playback menu or
message screen etc. (> 65)
3D settings during playback
Change this setting when the screen is not
correctly displayed for 3D compatible
programmes.
1 Press [OPTION].
2 Select “3D Settings”, then press [OK].
3 Select the item, then press [OK].
Signal Format
Original
Keep original picture format.
Side by side
3D picture format comprising of left and right
screens.
2D to 3D
Converts 2D pictures to 3D effect while
playing.
40
VQT4L31
3D Picture Mode
Normal
Normal 3D effects.
Soft
Soft 3D effects.
• This function cannot be enabled when
“Signal Format” is set to “2D to 3D”.
Manual Settings
Distance
Set the amount of depth perception.
Screen Type
Selects how the screen appears during 3D
playback (flat or round).
Frame Width
Set the amount of feathering at the edge of
screen.
Frame Colour
Set the colour of feathering at the edge of
screen.
• Depending on the contents, displayed items are different.
• 3D BD-Video can be played back in 3D only when this unit
is connected to the Full HD 3D compatible TV.
• This unit only guarantees the playback of the Frame
Sequential and the Side-by-Side (Half) programme types.
• Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other
discomfort while viewing 3D images, discontinue use and
rest your eyes.
• Depending on the connected TV, the video being played
back might switch to 2D video due to changes in resolution
etc. Check the 3D setting on the TV.
• 3D video might not output the way it is set in “HDMI Video
Format” (> 75) and “24p Output” (> 75).
• It may display as Side-by-Side when playback of the 3D
video is started.
• 3D BD-Video cannot be played back in 3D while recording.
Also, 3D playback stops when the timer recording starts.
DMRPWT635GL_eng.book 41 ページ
2013年2月4日 月曜日 午後1時25分
Editing video
Editing video
Deleting recorded titles
Once deleted, recorded content cannot be
restored to its original state. Make certain
before proceeding.
Deleting during play
1 Press [DEL] while playing.
2 Select “Delete”, then press [OK].
§
§
1
“For recorded titles” only
On the DIRECT NAVIGATOR screen:
Select the title.
DIRECT NAVIGATOR
HDD
All
Not Viewed
Grouped Titles
VIDEO
Time Remaining 45:54
Movies
Channel
Date
Drama
Sport
Title Name
Titles
Start Time 9:00 AM Rec time
Prog.Type: Movies
Play
RETURN
0:01
Page
OPTION
Delete
Select
PHOTO / MUSIC
AVCHD
Page Up
Page Down
Copy
2
Press [DEL].
3
Select “Delete”, then press [OK].
Multiple deleting
Select the title, then press the yellow button in
step 1.
Channel
Date
Title Name
Start Time 9:00 AM Rec time
Prog.Type: Movies
A check mark is displayed. Repeat this step.
• Press the yellow button again to cancel.
VQT4L31
41
DMRPWT635GL_eng.book 42 ページ
2013年2月4日 月曜日 午後1時25分
Editing video
Editing recorded titles
Once deleted, divided or partially deleted,
recorded content cannot be restored to its
original state. Make certain before proceeding.
§
§
“For recorded titles” only
Entering title name
• PIN is required to edit the titles with
(> 33)
1
Grouped Titles
VIDEO
Movies
Date
Drama
Sport
Titles
Delete
Select
Start Time 9:00 AM Rec time
Prog.Type: Movies
Enter Title Name
Set up Protection
Cancel Protection
Partial Delete
Edit
Divide Title
Chapter View
Change Thumbnail
Create Group
Change Prog.Type
Release Grouping
All Titles
• “Edit” has several functions.
Multiple editing
Select the title, then press the yellow button in
step 1.
A check mark is displayed. Repeat this step.
• Press the yellow button again to cancel.
VQT4L31
Drama
Title Name
Page Up
e.g.,
Information
Movies
Date
Page Down
Select the item, then press [OK].
Delete Title
Not Viewed
Copy
Press [OPTION].
Playback
All
Channel
0:01
Page
OPTION
PHOTO / MUSIC
42
Setting protection
Protection setting prevents the title from
accidental deletion.
AVCHD
Title Name
Start Time 9:00 AM Rec time
Prog.Type: Movies
Play
RETURN
1 Select “Enter Title Name” in “Edit”, then press
[OK].
2 Refer to “Entering text”. (> 83)
Time Remaining 45:54
Channel
2
3
in some functions.
On the DIRECT NAVIGATOR screen:
Select the title.
DIRECT NAVIGATOR
HDD
All
Not Viewed
Deleting
1 Select “Delete Title”, then press [OK].
2 Select “Delete”, then press [OK].
1 Select “Set up Protection” or “Cancel
Protection” in “Edit”, then press [OK].
2 Select “Yes”, then press [OK].
appears when setting the protection.
DMRPWT635GL_eng.book 43 ページ
2013年2月4日 月曜日 午後1時25分
Editing video
Partial deleting
Changing thumbnail
1 Select “Partial Delete” in “Edit”, then press
[OK].
2 Press [OK] at the start point and end point to
delete.
• You can find the desired point by using play,
search, etc. (> 38)
3 Select “Continue”, then press [OK].
• Select “Next”, then press [OK] to delete other
sections. Up to 20 sections can be set.
(> go to step 2)
4 Select “Delete”, then press [OK].
• Chapter Mark is generated in the scene that
was partially deleted.
1 Select “Change Thumbnail” in “Edit”, then
press [OK].
2 Press [OK] at the point to use as a thumbnail.
• You can find the desired point by using play,
search, etc. (> 38)
3 Select “Finish”, then press [OK].
5 Press [RETURN
• It is possible to change the image displayed on the Top
Menu after finalising or creating Top Menu.
].
Dividing title
1 Select “Divide Title” in “Edit”, then press [OK].
2 Press [OK] at the point to divide the title.
• You can find the desired point by using play,
search, etc. (> 38)
3 Select “Continue”, then press [OK].
4 Select “Divide”, then press [OK].
To confirm the division point
After performing step 2.
Select “Preview”, then press [OK].
• The unit plays 10 seconds before and after the
division point.
To change the division point
After performing step 2.
Restart play and select “Divide”, then press [OK]
at the division point.
To change the point
After performing step 2.
Restart play and select “Change”, then press [OK]
at the point to change.
Changing programme type of title
[HDD]
Programme type information in the title can be
edited.
Change Prog.Type
Select the item for prog.type change.
Prog.Type 1
Sport
Prog.Type 2
( No Prog.Type )
Prog.Type 3
( No Prog.Type )
Set
Cancel
OK
RETURN
1 Select “Change Prog.Type” in “Edit”, then
press [OK].
2 Select the item to change a programme type,
then press [OK].
3 Select the programme type, then press [OK].
4 Select “Set”, then press [OK].
• Divided titles will become a group of titles.
VQT4L31
43
DMRPWT635GL_eng.book 44 ページ
2013年2月4日 月曜日 午後1時25分
Editing video
Editing recorded titles
Editing chapters
1 Select “Chapter View”, then press [OK].
2 Perform the editing operations.
Edit Chapter Mark:
Select the point where you want to start a new
chapter while viewing the title.
1 Press the green button.
2 Press [OK] at the point you want to divide.
• Repeat this step.
3 Press [RETURN
screen.
] to go to Chapter View
To delete the chapter:
1 Select the chapter, then press [DEL].
Multiple editing
Select the chapter, then press the yellow
button.
A check mark is displayed. Repeat this
step.
• Press the yellow button again to cancel.
2 Select “Delete”, then press [OK].
To combine chapters (Delete chapter
mark):
1 Select the chapter, then press [OPTION].
2 Select “Combine Chapters”, then press
[OK].
3 Select “Combine”, then press [OK].
The selected chapter is combined to the
next chapter.
Playback from Chapter View
Refer to “Playback from Chapter View”. (> 35)
• The maximum number of chapters:
(Depends on the state of recording.)
Approx. 1000 per title
• When the title has the maximum number of chapters, you
cannot perform the Resume play function (> 33) or the
“Change Thumbnail” (> 43) with the title.
44
VQT4L31
DMRPWT635GL_eng.book 45 ページ
2013年2月4日 月曜日 午後1時25分
Copying video
Copying video
Copying titles
6
§1, 2
§1
§2
1
“For recorded titles” only
The title in the source media will be deleted.
Set other settings, then press [OK].
e.g.,
Automatic Standby after Copy
Off
Standby status can be changed if required.
Please press OK to start copying.
Connect the USB HDD.
OK
2
3
Press [DRIVE SELECT] to select “HDD”,
then press [DIRECT NAVIGATOR].
• If the DIRECT NAVIGATOR screen of
photo or music is displayed, press the red
button, then select “VIDEO”.
Select the title, then press the yellow
button.
A check mark is displayed. Repeat this
step.
Channel
Date
Title Name
Start Time 9:00 AM Rec time
Prog.Type: Movies
• Press the yellow button again to cancel.
4
5
Press the blue button.
Select “Yes”, then press [OK].
• If you select “No”, you can change the
selection. (> right)
RETURN
(> below, Setting the copying options)
7
Select “Yes”, then press [OK].
To register the external HDD (USB HDD)
Refer to “Registering the USB HDD”. (> 62)
• You cannot copy the following titles to the USB HDD.
- Protected titles
- HD Video (AVCHD)
- SD Video (MPEG2)
To change the selection
1 Select “No”, then press [OK] in step 5 (> left).
2 Select the title, then press the yellow button.
Repeat this step to select titles.
3 Go to step 4 (> left).
About screen icons on the DIRECT
NAVIGATOR
Refer to “Screen icons”. (> 33)
Setting the copying options
1 Select the item in step 6 (> above).
2 Press [2, 1] to change the settings.
• Automatic Standby after Copy
On:
This unit is turned to standby mode when it is
not operated for approximately 5 minutes
after completing copy.
VQT4L31
45
DMRPWT635GL_eng.book 46 ページ
2013年2月4日 月曜日 午後1時25分
Photo
Photo
Playing photos
§1
§2
§3
To exit the Calendar screen
Press [PAUSE ;].
• When there are many files and/or folders, some files may
not be displayed or not be playable. (> 96)
§1
§2
§3
“For data files” only (JPEG, MPO)
[BD-RE] only
[DVD-R] only
• In order to play back 3D photo (MPO), this unit
should be connected to a Full HD 3D
compatible TV.
1
e.g., [HDD]
Album (> below)
DIRECT NAVIGATOR
HDD
All
Album 1
PHOTO
Album 2
Album 3
Album 4
3D
Date & Event Name
03.01.2012
29.10.2012
25.02.2013
15.03.2013
[HDD]
1 Press [FUNCTION MENU].
2 Select “Photo” in “Playback
Contents”, then press [OK].
[USB_HDD] [BD-RE] [DVD-R] [CD] [SD] [USB]
1 Insert or connect the media.
The menu screen appears. (> 36)
2 Select “View Photos”, then press
[OK].
2
DIRECT NAVIGATOR (PHOTO)
screen
Photos
8
12
18
4
OK
RETURN
VIDEO / MUSIC
Page 0002/0002
Calendar
OPTION
Slideshow
Select
Page Up
Page Down
CH
Copy
Event
It is displayed for each recording date.
• It is displayed for each folder for media other
than HDD.
Select the event, then press [OK].
e.g., [HDD]
Screen icons
Tab
DIRECT NAVIGATOR
HDD
All
Album 1
PHOTO
Album 2
Album 3
Album 4
3D
Date & Event Name
03.01.2012
29.10.2012
25.02.2013
15.03.2013
Photos
8
12
18
(Tab)
4
OK
RETURN
VIDEO / MUSIC
Page 0002/0002
Calendar
OPTION
Slideshow
Select
Page Up
Page Down
CH
Copy
• To select the tab
Press [2, 1].
• Start Slideshow
Refer to “Slideshow settings”. (> 47)
• Switching to the Calendar screen
([HDD])
Press [PAUSE ;].
3
46
Select the photo, then press [OK].
• Press [2, 1] to display the previous or
next photo.
VQT4L31
3D
(Tab)
Album
Placing photos in albums of your
choice makes it easier to find them.
(> 48)
3D photos (MPO) are automatically
sorted. Select from this tab to play
back in 3D. (It will play back in 2D
when selected from other tabs.)
Photo protected
New photo which is stored and not
viewed
DMRPWT635GL_eng.book 47 ページ
2013年2月4日 月曜日 午後1時25分
Photo
Switching to the VIDEO or MUSIC screens
[HDD]:
1 On the DIRECT NAVIGATOR screen:
Press the red button.
2 Select “VIDEO” or “MUSIC”, then press [OK].
Slideshow settings
1
On the DIRECT NAVIGATOR screen:
Press the green button.
Slideshow
Start Slideshow
[BD-RE]:
On the DIRECT NAVIGATOR screen:
Press the red button.
Photo play option
1
2
While displaying a photo:
Press [OPTION].
Select the item, then press [OK].
Aspect
You can switch the screen mode. (> 83)
Graphic Display Level
You can change the 3D position of the
screen display, etc., during the 3D photo
playback.
Photo Menu
• Start Slideshow
You can start a slideshow.
• Rotate RIGHT/Rotate LEFT
e.g.,
• The information of the rotated photos will
not be stored depending on the media.
• This function is not available during the
3D photo playback.
• Information
Information (shooting date etc.) is shown.
Interval
Normal
Transition Effect
Fade
Repeat Play
On
Music Selection
No background music
Background Music
No List
Random BGM
Off
OK
RETURN
2
Select the item, then press [OK].
Start Slideshow
You can start a slideshow.
Interval
You can set up the time until the next photo
is to display.
Transition Effect§
Effect for the next photo to display can be
set.
Repeat Play
You can set up to play back repeatedly.
Music Selection§
You can select background music on (either
from HDD or USB) or off.
Background Music§
You can select background music from HDD
(My Favourites or Playlists) or USB (Folder).
Random BGM§
You can play back the BGM (Background
Music) in random order.
§
This function is not available during the
3D photo playback.
To pause the Slideshow
Press [PAUSE ;].
• Press [PAUSE ;] again to restart.
To stop the Slideshow
Press [RETURN
].
VQT4L31
47
DMRPWT635GL_eng.book 48 ページ
2013年2月4日 月曜日 午後1時25分
Photo
Editing photos
3
Select the item, then press [OK].
Edit
1
On the DIRECT NAVIGATOR screen:
e.g., [HDD]
DIRECT NAVIGATOR
HDD
All
Album 1
PHOTO
Album 2
Album 3
Album 4
3D
Date & Event Name
03.01.2012
29.10.2012
25.02.2013
15.03.2013
Photos
8
12
18
4
OK
RETURN
VIDEO / MUSIC
Page 0002/0002
Calendar
OPTION
Slideshow
Select
Page Up
Page Down
CH
• Combine Events
[HDD]
Select “Yes”, then press [OK].
Copy
To edit the event:
Select the event.
To edit the photo:
1 Select the event, then press [OK].
2 Select the photo to edit.
• To select multiple events or photos
Press the yellow button when selecting the
event or photo.
A check mark is displayed. Repeat this
step.
• Press the yellow button again to cancel.
2
• Add to Album
[HDD]
1 Select the destination album, then press
[OK].
2 Press [OK].
Press [OPTION].
• Selectable items will change depending on
the media and the type of file.
• Remove from Album
[HDD]
Select “Yes”, then press [OK].
• Enter Album Name
[HDD]
Refer to “Entering text”. (> 83)
• Enter Event Name
Refer to “Entering text”. (> 83)
Delete Photos
Select “Yes”, then press [OK].
Set up Protection
[SD]
Select “Yes”, then press [OK].
appears when the protection is set.
• Even if the protection is set, the photo may
be deleted by another unit.
Cancel Protection
[SD]
Select “Yes”, then press [OK].
48
VQT4L31
DMRPWT635GL_eng.book 49 ページ
2013年2月4日 月曜日 午後1時25分
Photo
Copying photos
§
§
To stop copying
“For data files” only (JPEG, MPO)
Selecting and copying the photos
[HDD]
>
[SD]
[USB_HDD] [SD] [USB]
>
[HDD]
1
On the DIRECT NAVIGATOR screen:
To copy the event:
Select the event, then press the blue button.
To copy the photo:
1 Select the event, then press [OK].
2 Select the photos to copy, then press the
blue button.
• To select multiple events or photos
Press the yellow button when selecting the
event or photo.
A check mark is displayed. Repeat this
step.
• Press the yellow button again to cancel.
2
When copying to HDD:
Select “Yes” or “No”, then press [OK].
• If you select “Yes”:
Select the album, then press [OK].
Press and hold [RETURN
• The name of the copied photos will be changed.
• If the number of files/folders to be copied exceeds the
maximum (> 96), copying will stop partway through.
Copying automatically
[USB_HDD] [SD] [USB] > [HDD]
Newly added photos will automatically be copied
to the HDD.
1
2
Copy Photos
SD card
HDD
Please select the destination album.
Album 2
Select “Copy New Photos”, then press [OK].
e.g., [SD]
SD card
HDD
Start copying ?
Yes
No
OK
RETURN
3
Select “Yes”, then press [OK].
Copying starts.
Once the copy is completed, select “Yes” or
“No”, then press [OK].
To stop copying
HDD Album Selection
Album 1
Insert the media.
The menu screen appears. (> 36)
Copy New Photos
4
e.g., [SD]
] for 3 seconds.
Album 3
Album 4
Press and hold [RETURN
] for 3 seconds.
OK
RETURN
• You can categorise and manage the
events and photos on the HDD by
copying to the album. (> 46)
3
Select “Yes”, then press [OK].
Copying starts.
• Photos without shooting date will be categorised using the
creation date.
• If the space on the destination drive runs out or the number
of files/folders to be copied exceeds the maximum (> 96),
copying will stop partway through.
• The name of the copied photos will be changed.
VQT4L31
49
DMRPWT635GL_eng.book 50 ページ
2013年2月4日 月曜日 午後1時25分
Music
Music
Playing music
§1
§1
§2
“For data files” only (MP3)
[DVD-R] only
Copying music (MP3) to HDD
[USB_HDD] [USB] > [HDD]
After performing steps 1–2 (> left)
Music CD:
1
2
Insert the disc.
Playback will automatically start.
To stop copying
MP3:
Press and hold [RETURN
§2
1
2
Insert or connect the media.
The menu screen appears. (> 36)
• [DVD-R] [CD] Playback will automatically
start if only MP3 is recorded.
Select “Play / Copy Music ( MP3 )” or
“Play Music ( MP3 )”, then press [OK].
Playback will start.
• Using the tree screen to find a folder
1 Press [OPTION].
2 Select “Select Folder”, then press [OK].
3 Select the folder, then press [OK].
To play other music (track)
Select the item, then press [OK].
e.g., [CD] (MP3)
DIRECT NAVIGATOR
CD ( MP3 )
No.
Track List
Track Name
0001
0002
0003
0004
0005
• The track/artist name will be displayed if the information is
contained in ID3 tag of the MP3 file.
• If there is a large amount of photo data etc. within a MP3
file, play may not be possible.
50
VQT4L31
Press the blue button.
Select “Copy”, then press [OK].
] for 3 seconds.
• While copying, no other operations can be performed.
Timer recordings will not proceed.
• All tracks in the folder will be copied.
• Tracks recorded to HDD in one operation will be regarded
as one album.
DMRPWT635GL_eng.book 51 ページ
2013年2月4日 月曜日 午後1時25分
Music
Playing music recorded on HDD
[HDD]
1
2
1 Select the playlist, then press [OK].
2 Select the track, then press [OK].
Press [FUNCTION MENU].
Select “Music” in “Playback Contents”, then
press [OK].
DIRECT NAVIGATOR
Music Menu
HDD
Playlists
MUSIC
Total Tracks 53
Artists
Albums
My Favourites
Frequently Played
Tracks most often played recently (up to
30 tracks).
Select the track, then press [OK].
Playlists
Frequently Played
Random Play
OPTION
OK
RETURN
3
Random Play
Please select to access music.
VIDEO / PHOTO
Select the item, then press [OK].
Random playback of all tracks.
Playback starts.
Artists
1 Press [2, 1] to select the initial of the
artist.
2 Select the name of the artist, then press
[OK].
3 Select the album, then press [OK].
4 Select the track, then press [OK].
Switching to the VIDEO or PHOTO screens
1 On the DIRECT NAVIGATOR (Music Menu)
screen:
Press the red button.
2 Select “VIDEO” or “PHOTO”, then press [OK].
Albums
1 Press [2, 1] to select the initial of the
album.
2 Select the album, then press [OK].
3 Select the track, then press [OK].
Showing Track Information
On the track list screen:
1 Select the track, then press [OPTION].
2 Select “Information”, then press [OK].
My Favourites
Tracks registered in “My Favourites”.
Select the track, then press [OK].
• Registering a track to the “My Favourites”.
(Up to 99 tracks)
While the track list screen is displayed:
Select the track, then press the green
button.
VQT4L31
51
DMRPWT635GL_eng.book 52 ページ
2013年2月4日 月曜日 午後1時25分
Music
Playing music
Operations during music play
[HDD] [USB_HDD] [DVD-R] [CD] [USB]
Stop
Displaying photos (Slideshow)
Photos stored on the “Album” of the HDD can be
played back as slideshow during playback of the
music.
Press [STOP ∫].
While playing the music
Press the red button.
Pause
• To change the photos to display
1 While slideshow playing
Press [OPTION].
2 Select “Select Photo Album”, then press
[OK].
3 Select the album, then press [OK].
Press [PAUSE ;].
• Press [PLAY/a1.3 1] to restart play.
Search
Press [SLOW/SEARCH 6] or
[SLOW/SEARCH 5].
• Press [PLAY/a1.3 1] to restart play.
e.g.,
Select Photo Album
Please select the album to start slideshow.
Sample Photos
Album 1
Album 2
Album 3
Album 4
Skip
Press [SKIP :] or [SKIP 9].
Repeat Play/Random
Refer to “Repeat Play” or “Random” in Play menu
(> 65).
While playing music a photo slideshow
can be displayed.
OK
RETURN
To end the slideshow
Press [RETURN
].
How to create the photo album
Refer to “Add to Album”. (> 48)
Sound Effects
Refer to “Sound Effects” in Sound menu (> 66).
52
VQT4L31
To play music continuously even if the Power
off link works
Refer to “Playing music continuously even after
turning off power to the TV”. (> 63)
DMRPWT635GL_eng.book 53 ページ
2013年2月4日 月曜日 午後1時25分
Music
Editing music/playlist
Delete All Tracks
1
On the DIRECT NAVIGATOR screen:
Press [OPTION].
1 If the confirmation screen appears:
Select “Yes”, then press [OK].
2 Select “Delete”, then press [OK].
e.g.,
DIRECT NAVIGATOR
HDD
Music Menu
MUSIC
Total Tracks 53
Artists
Delete Album
Select “Delete”, then press [OK].
Albums
My Favourites
Playlists
Frequently Played
Random Play
OK
RETURN
2
OPTION
Please select to access music.
VIDEO / PHOTO
Select the item, then press [OK].
e.g., while selecting an Album
Delete Album
Delete
Select “Delete”, then press [OK].
Edit Album Name/Edit Track Name/Edit Artist
Name/Edit Playlist Name
Refer to “Entering text” on page 83.
Add to Playlist
Edit Album Name
Playback Settings
• Editing operations will change depending
on the screen.
Remove All Tracks
Select “Remove”, then press [OK].
• Tracks themselves are not deleted from the
HDD.
Clear My Favourites/Clear Frequently Played
Select “Clear”, then press [OK].
• Tracks themselves are not deleted from the
HDD.
Remove
Select “Remove”, then press [OK].
• Tracks themselves are not deleted from the
HDD.
Add to Playlist
You can register your favourite albums and tracks
into 10 preset playlists.
Select the playlist, then press [OK].
• New playlist cannot be added.
• Up to 999 tracks can be registered to each
playlist.
VQT4L31
53
DMRPWT635GL_eng.book 54 ページ
2013年2月4日 月曜日 午後1時25分
With Other Equipment
With Other
Equipment
Copying the HD Video or the SD Video
§
§
3
“For data files” only
Select the title, then press the yellow button.
A check mark is displayed. Repeat this step.
e.g., [SD]
This unit cannot copy the titles in the HDD to
the media. Be careful when deleting the
original title after copying to the HDD.
Copy Video ( AVCHD )
SD
HDD
Destination Capacity
Size
No.
Time 9:00 AM
Rec time
0:30
Size
200 MB
e.g., Connecting to the Panasonic video camera
001
002
003
004
Channel
AVCHD
AVCHD
AVCHD
AVCHD
• Press the yellow button again to cancel.
(All the recordings on the same date
become a title.)
USB connection cable
(optional)
• If you connect a Panasonic product with a USB connection
cable, setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the
connected equipment.
Copying HD Video (AVCHD)
[USB_HDD] [SD] [USB], video camera, etc. > [HDD]
• The original file must be in the AVCHD standard.
1
Connect the video camera or insert the
media.
• Make the video camera ready for data
transfer.
The menu screen appears. (> 36)
2
54
Select “Copy Video ( AVCHD )”, then press
[OK].
VQT4L31
4
5
Press [OK].
Select “Start”, then press [OK].
• It may take time for the copying to start.
To stop copying
Press and hold [RETURN
] for 3 seconds.
• An AVCHD title with 100 or more scenes will be divided into
titles every 99th scene and copied.
Screen icons
(NTSC) Title recorded using a different
encoding system from that of the
(PAL)
unit.
• Titles displaying these marks
cannot be selected.
DMRPWT635GL_eng.book 55 ページ
2013年2月4日 月曜日 午後1時25分
With Other Equipment
Copying SD Video (MPEG2)
[USB_HDD] [SD] [USB], video camera, etc. > [HDD]
• The original file must be in the SD-Video
standard.
1
Connect the video camera or insert the
media.
• Make the video camera ready for data
transfer.
The menu screen appears. (> 36)
2
Select “Copy Video ( MPEG2 )”, then press
[OK].
e.g.,
Copy Video ( MPEG2 )
USB
HDD
List
Press OK to start copying.
To edit the copying list
Select “List”, then press [1] (right) after step 2.
(> left)
1 Select the title, then press the yellow button.
Repeat this step to select titles.
2 Press [OPTION].
3 Select the item, then press [OK].
Delete All:
All titles that you registered to copy are
deleted.
Select “Yes”, then press [OK].
Add:
Add new items to the copying list.
1 Select the title, then press the yellow
button.
Repeat this step to select titles.
2 Press [OK].
Delete:
Select “Yes”, then press [OK].
Start
OK
RETURN
All titles of SD video on the media that can
be copied are registered in the copying list.
3
4
Select “Start”, then press [OK].
Select “Yes”, then press [OK] to start
copying.
Screen icons
To stop copying
Press and hold [RETURN
Move:
Move selected items or change the order of
items on the copying list.
Select the destination, then press [OK].
4 Press [2].
] for 3 seconds.
Data size of each registered item
Destination Capacity: 20806 MB
Size:
0 MB ( 0% )
• The titles will be copied in the order of the copying list. If
you want to specify the order, edit the copying list after the
titles are selected.
• The total data size shown may be larger than the sum of the
data sizes for each registered item.
No.
Title
Size
New item (Total=0)
Size:
Data size recorded to the
HDD
Page 01/01
(NTSC)
(PAL)
Title recorded using a different
encoding system from that of the
unit.
• Titles displaying these marks
cannot be selected.
VQT4L31
55
DMRPWT635GL_eng.book 56 ページ
2013年2月4日 月曜日 午後1時25分
With Other Equipment
Smart Home Networking (DLNA)
Smart Home Networking (DLNA) allows you to
watch the contents and broadcasts on Server
equipment connected on the same network from
Client equipment.
This unit can be used both as Server and Client.
Additionally, if used as Client, this unit can also be
used as Media Renderer, which can be controlled
by a Smartphone, etc.
Preparation
• Network connection (> 17, 20)
• Perform Home Network settings of the DLNA
compatible equipment.
Using this unit as Server
You can enjoy the video and photos saved on the
HDD of this unit on DLNA (Client) compatible
equipment connected via a network.
You can also watch broadcasts received by this
unit on DLNA (Client) compatible equipment.
• The titles with access restriction (e.g., copy
restriction) signals sent from broadcasters are
not available for this function.
• You cannot play back music from the playback
equipment (Client).
For more details, refer to the following website
and the operating instructions for each item of
equipment.
http://panasonic.jp/support/global/cs/
DLNA compatible
equipment (Client)
(This site is in English only.)
This unit (Server)
§
• Some video or broadcasts cannot be enjoyed depending on
the DLNA (Client) compatible equipment, the condition of
this unit, or the file type.
• Ensure that the router for your home network has adequate
security system to prevent unauthorized access.
For details regarding the connection and
operation of equipment connected via a network,
refer to their respective operating instructions.
§
DLNA function compatible software should be
installed. For more details, refer to the
Panasonic website. (> left)
Preparation
• When DLNA (Server) Function is deactivated,
make the settings. (> 67, 77, Home Network
Settings)
1
2
Operate the playback equipment (Client) to
display the list of contents on this unit.
• Refer to their respective operating
instructions.
Select the item, then press [OK].
• The DLNA compatible device that is to be connected to the
unit should be connected to the same hub or broadband
router as the unit.
• Files not on the HDD cannot be played back.
• Playing back 3D video recorded on this unit may not work
properly.
• 3D photos copied to this unit cannot be played back in 3D.
• Editing is not possible.
• The name of this unit is not displayed on the server list of
DLNA compatible equipment (Client) while playing back a
BD-Video.
56
VQT4L31
DMRPWT635GL_eng.book 57 ページ
2013年2月4日 月曜日 午後1時25分
With Other Equipment
Using this unit as Client
You can share videos, photos and music stored in
the DLNA Certified media server (such as a PC
with Windows 7 installed etc.) connected via a
network with this unit.
This unit (Client)
1
2
3
4
DLNA compatible
equipment (Server)
Press [FUNCTION MENU].
Select “Home Network ( DLNA Client )” in
“Network”, then press [OK].
A list of equipment connected via the
network is displayed.
• This list can be updated by pressing the red
button.
Select the equipment, then press [OK].
Select the item, then press [OK].
• Menu structure will be different depending
on the equipment. Select the contents by
repeating the operation.
• Convenient functions can be used by
pressing [OPTION] depending on the
contents.
• Control Panel
Control Panel is displayed once the
playback starts.
Operation can be performed with
[3, 4, 2, 1], [OK] and [EXIT ].
• Press [OK] if the Control Panel is not
displayed.
• (While paying video or photo) Press
[RETURN ] to hide the Control Panel.
• You may not be able to use the Control Panel even if you
use the Panasonic DLNA compatible equipment.
• Depending on the contents and the connected equipment,
playback may not be possible.
• Playlist of Windows Media® Player can play back only the
contents that are stored in the libraries.
• While playing back the 3D programme, you cannot set “3D
Settings”. (> 40)
• Items displayed in grey on the display cannot be played
back by this unit.
• Depending on the performance of the connected PC, video
frames may be dropped during playback, or video may not
be played back at all. (> 90)
Support format of DLNA client
Video
Video
codec
Container
Audio codec
Example of
file
extension
AVCHD
H.264
Dolby® Digital .mts
MP4
H.264
AAC
Recorded
programmes
(XP/SP/LP/
EP/FR)
MPEG2
Dolby® Digital .mpg
.mpeg
Linear PCM
Recorded
programmes
(DR/HG/HX/
HE/HL/HM)
MPEG2
H.264
.m2ts
MPEG
Dolby® Digital .ts
.mp4
Photo
Format
JPEG
Example of file extension
.jpg
Audio
Audio codec
Example of file extension
MP3
.mp3
FLAC
.flac
Linear PCM
–
VQT4L31
57
DMRPWT635GL_eng.book 58 ページ
2013年2月4日 月曜日 午後1時25分
With Other Equipment
Smart Home Networking (DLNA)
Using this unit as Media Renderer
This unit will work as Media Renderer, which
allows you to play back the contents on DLNA
Server by operating a Digital Media Controller (a
smartphone, etc.).
Possible applications:
Server
This unit
(Media Renderer)
Controller§
Server
+
Controller
This unit
(Media Renderer)
§
§
Digital Media Controller compatible software
should be installed.
Following steps are necessary to use this unit as
Media Renderer.
1
2
3
Press [FUNCTION MENU].
Select “Home Network ( Media Renderer )”
in “Network”, then press [OK].
Operate the Digital Media Controller
compatible equipment.
To exit from Home Network ( Media Renderer )
screen
Press [RETURN
58
VQT4L31
].
• Depending on the contents and the connected equipment,
playback may not be possible.
• Items displayed in grey on the display cannot be played
back by this unit.
• This unit can be played back via connected equipment only
when controlled using Digital Media Controller.
• Depending on the performance of the connected PC, video
frames may be dropped during playback, or video may not
be played back at all.
DMRPWT635GL_eng.book 59 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Convenient
functions
VIERA Connect (Enjoying Internet Service)
VIERA Connect allows you to access some
specific websites supported by Panasonic, and
enjoy Internet contents such as photos, videos,
etc. from VIERA Connect home screen. This unit
has no full browser function and all features of
websites may not be available.
e.g.,
Featured Videos
1
2
Press [INTERNET].
The message is displayed. Please read it
carefully and then press [OK].
• The video communication service can be
accessed directly by pressing [ ] button.
Select the item, then press [OK].
• Operable buttons:
[3, 4, 2, 1], [OK], [RETURN
buttons and number buttons.
], colour
To exit from VIERA Connect
MORE
BACK
XXXXXX
VIERA Connect Home screen
• Images are for illustration purpose, contents
may change without notice.
Preparation
• Network connection (> 17, 20)
To enjoy video communication (e.g., SkypeTM)
• Connect this unit with optional Communication
Camera (TY-CC20W or TY-CC10W).
Depending on the area, this optional camera
may not be available. Please consult your local
Panasonic dealer for advice.
e.g.,
This unit’s rear panel
Communication Camera
TY-CC20W or TY-CC10W
Press [EXIT
].
• When playing content from a disc, SD card or USB device
VIERA Connect cannot be accessed.
• In the following cases, settings are possible using “Network
Service Settings” (> 67, 76)
- When restricting the use of VIERA Connect.
- When the audio is distorted.
• If using slow Internet connection, the video may not be
displayed correctly. A high-speed Internet service with a
speed of at least 6 Mbps is recommended.
• Be sure to update the software (firmware) when a software
(firmware) update notice is displayed on the screen.
If the software (firmware) is not updated, you will not be
able to use the VIERA Connect function.
• The services through VIERA Connect are operated by their
respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
• All features of websites or content of the service may not be
available.
• Some contents may be inappropriate for some viewers.
• Some contents of VIERA Connect may only be available for
specific countries and may be presented in specific
languages.
• If timer recording starts, VIERA Connect will stop.
• For operating method refer to the following
website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
• Cannot be used while recording, copying, or
playing BD-Video.
VQT4L31
59
DMRPWT635GL_eng.book 60 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Format SD card
Formatting deletes all contents (including
computer data), and they cannot be restored.
Check carefully before proceeding.
1
2
3
4
5
6
7
Press [FUNCTION MENU].
Select “SD Card” in “Drive Select”, then
press [OK].
Select “SD Card Management” in “Others”,
then press [OK].
Select “Format Card”, then press [OK].
Select “Yes”, then press [OK].
Select “Start”, then press [OK].
Press [OK].
• The contents are deleted when you format a card even if
you have set protection.
• Do not disconnect the AC mains lead while formatting.
This can render the card unusable.
• When a card has been formatted using this unit, it may not
be possible to use it on any other equipment.
60
VQT4L31
DMRPWT635GL_eng.book 61 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Registering the external HDD (USB HDD)
§
§
“For recorded titles” only
If you intend to move recorded titles to a
USB HDD, the USB HDD must be registered to
this unit first.
Connecting the USB HDD
Connect this unit with optional USB HDD.
e.g.,
Limitation information
• A USB HDD with a capacity of less than 160 GB
cannot be used.
• Registering of a USB HDD will format the
USB HDD and all the content already recorded
will be deleted.
• Up to eight USB HDDs can be registered on this
unit.
• Registered USB HDDs cannot be used with
devices other than this unit.
Regarding the external HDD (USB HDD)
Please use a recommended USB HDD.
For the latest information on recommended
USB HDDs, please check the following website.
http://panasonic.jp/support/global/cs/
• Certain non-recommended USB HDDs cannot
be used with this unit.
• If a problem occurs with the USB HDD, please
contact the manufacturer of the device.
This unit’s rear panel
USB HDD
• Only one USB HDD (For recorded titles) can be
connected at the same time.
• Do not connect additional HDDs using a USB
hub.
• For details about connection method, refer to
the instructions supplied with the USB HDD.
Disconnecting the USB HDD
Please use the following procedure to disconnect.
Disconnecting without following this procedure
may result in the loss of recorded content from
the USB HDD or the internal HDD.
1
2
3
4
5
Press [SETUP].
Select “Settings for USB HDD” in “HDD /
Disc / USB HDD”, then press [OK].
Select “USB HDD Disconnection”, then
press [OK].
Select “Yes”, then press [OK].
Disconnect the USB HDD from this unit.
VQT4L31
61
DMRPWT635GL_eng.book 62 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Registering the external HDD (USB HDD)
Registering the USB HDD
• If the registering screen appears when
connecting the USB HDD, go to step 4.
1
2
3
4
Press [SETUP].
Select “Settings for USB HDD” in “HDD /
Disc / USB HDD”, then press [OK].
Select “USB HDD Registration”, then press
[OK].
Select “Yes”, then press [OK].
• If you have already registered eight
USB HDDs, it will be necessary to delete
one or more of them before registering a
new USB HDD.
The message screen appears:
1 Select “Yes”, then press [OK].
2 Select the USB HDD to cancel, then
press [OK].
The confirmation screen appears.
3 Select “Yes”, then press [OK].
5
6
62
When the registering is complete, message
screen appears.
Press [OK].
The confirmation screen appears.
Press [OK].
VQT4L31
To cancel all USB HDD registrations
Refer to “Cancellation of all USB HDD
Registrations”. (> 72)
• If you register a USB HDD, all the content already recorded
on the USB HDD will be deleted.
• It is not possible to play back the content on the USB HDD
whose registration has been cancelled.
• You can check the registration number of the USB HDD on
the DIRECT NAVIGATOR. (> 33)
DMRPWT635GL_eng.book 63 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
VIERA Link functions
What is VIERA Link “HDAVI Control”?
VIERA Link “HDAVI Control” is a convenient
function which will link the operations of this unit
and a Panasonic TV (VIERA) or an
amplifier/receiver. You can use this function by
connecting the equipment with the HDMI cable.
See the operating instructions for connected
equipment.
Download from TV
When you connect the unit to a TV for the first
time, the setting information on the TV is acquired
by this unit. (> 19).
• This function is available with the TV that
supports “HDAVI Control 3” or later.
Automatic input switching/
Power on link
When the following operations are performed, the
input channel of the TV will be automatically
switched and the screen of this unit will be
displayed. Additionally when the TV is off, the TV
will automatically turn on.
- When play starts on this unit
- When an action that uses DIRECT NAVIGATOR
etc, is performed
Power off link
When you set the TV to standby mode, this unit is
also automatically set to standby mode.
• Power off link function does not work when
recording, copying etc.
Playing music continuously even after
turning off power to the TV
The following operations make it possible to keep
the power of the unit on and to play music
continuously.
When the unit is directly connected to an
amplifier/receiver.
1 While playing music
Press [OPTION].
2 Select “TV Power Off”, then press [OK].
PAUSE LIVE TV
You can operate this unit with the TV remote
control.
Refer to “PAUSE LIVE TV”. (> 25)
• This function is available with the TV that
supports “HDAVI Control 3” or later.
Direct TV Recording
This function allows you to immediately start
recording the programme that you are viewing on
the TV.
Refer to the TV operating instructions for
operation.
• This function is available with the TV that
supports “HDAVI Control 3” or later.
Easy control only with VIERA remote control
You can operate this unit using the TV remote
control.
Refer to the operating instructions of the TV about
the buttons that you can use.
• This function is available with the TV that
supports “HDAVI Control 2” or later.
• This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the standard for Panasonic’s HDAVI
Control compatible equipment. This standard is compatible
with Panasonic’s conventional HDAVI equipment.
Please refer to individual manuals for other manufacturers’
equipment supporting VIERA Link function.
• VIERA Link “HDAVI Control”, based on the control functions
provided by HDMI which is an industry standard known as
HDMI CEC (Consumer Electronics Control), is a unique
function that we have developed and added. As such, its
operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
• These functions may not work normally depending on the
equipment condition.
• Use the remote control supplied with this unit if you cannot
operate this unit using buttons on the TV remote control.
• The operation of this unit may be interrupted when you
press certain buttons on the TV remote control.
• Sound may be discontinued for several seconds
when the power to the TV is turned off.
• This function is available with the TV that
supports “HDAVI Control 2” or later.
VQT4L31
63
DMRPWT635GL_eng.book 64 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Playback menu
A variety of operations and settings such as
changing the subtitles and audio languages can
be performed during playback of video or music.
Also, picture and sound quality can be set to your
personal taste.
1
Press [DISPLAY].
e.g.,
Disc
Play
Picture
Sound
Other
Menu
2
3
4
Soundtrack
Subtitles
1 ENG
2/0 ch
1 ENG
Off
1
Angle
Item
Setting
Select the menu, then press [1] (right).
Select the item, then press [1] (right).
Select the setting.
• Some items can be changed by pressing
[OK].
Depending on the condition of the unit (playing,
stopped, etc.) and media contents, there may be
some items which cannot be selected or for which
the effects do not work properly.
To clear the Playback menu
Press [DISPLAY].
Disc
Video
The original video recording method
(MPEG-4 AVC etc.) appears.
Signal Type
Primary Video
Video
The original video recording method
appears.
Soundtrack
Select the type of audio or language.
Secondary Video
Video
Select on/off of images.
The original video recording method
appears.
Soundtrack
Select on/off of audio and the language.
Soundtrack§
Show or change the soundtrack.
Subtitles§
Turn the subtitle on/off, and change the
language depending on the media.
Audio Selection
Switch in the case of multiple audio.
Subtitle Style
Select the subtitle style recorded on the disc.
Angle§
Change the number to select an angle.
Audio Channel
Change audio (LR/L/R) during playback.
§
64
VQT4L31
With some discs, you may only be able to
make changes using the menus on the disc.
DMRPWT635GL_eng.book 65 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Play
Repeat Play
Select the item which you want to repeat.
Random
Select whether to play random or not.
Graphic Display Level
You can change the 3D position of the
playback settings display, etc., during the 3D
playback.
Picture
Mode
Select the picture quality mode during play.
• Normal
Default setting.
• Soft
Soft picture with fewer video artifacts.
• Fine
Details are sharper.
• Cinema
Mellows movies, enhances detail in dark
scenes.
• Cartoon
A mode suitable for viewing animations.
Advanced Settings
HD optimizer
This will compensate the mosaic noise in
the video and haze around the characters
precisely.
Chroma Process
The high-resolution processing of HDMI
chroma signals produces a high-resolution
picture with rich picture quality.
Detail Clarity
The picture becomes sharp and detailed.
Super Resolution
Standard picture quality video is corrected
to sharp and crisp picture quality when it is
output as 1080i/1080p.
Progressive
Select the method of conversion for
progressive output to suit the type of title being
played.
• Auto
Automatically detects the film and video
content, and appropriately converts it.
• Video
Select this setting when the content is
distorted if “Auto” is selected.
• Film
Select this if the edges of the
film content appear jagged or
rough when “Auto” is
selected. However, if the
video content is distorted as shown in the
illustration to the right, then select “Auto”.
VQT4L31
65
DMRPWT635GL_eng.book 66 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Playback menu
Sound
Sound Effects
• This function is effective when “Digital Audio
Output” is set to “PCM”. (> 73)
Re-master 1/Re-master 2
Sound becomes more natural by adding
higher frequency signals not recorded on
the track.
Dialogue Enhancer
The volume of the centre channel is raised to
make dialogue easier to hear.
Other
Position
Change the position where this menu screen
appears on your TV.
Audio attribute
LPCM/ Digital/
Digital+/ TrueHD/
DTS/DTS-HD/MPEG/
Signal type
HE-AAC:
k (kHz):
Sampling frequency
b (bit):
Number of bits
ch (channel):
Number of channels
Language
ENG
English JPN
Japanese ARA
FRA
French CHI
Chinese HIN
DEU
German KOR
ITA
ESP
NLD
Italian MAL
Spanish VIE
Dutch THA
Arabic
Hindi
Korean PER
Malay IND
Persian
Indonesian
Vietnamese MRI
Maori
Thai BUL
Bulgarian
Romanian
SVE
Swedish POL
Polish RUM
NOR
Norwegian CES
Czech GRE
Greek
DAN
Danish SLK
Slovak TUR
Turkish
POR
Portuguese HUN
RUS
Russian FIN
Hungarian ¢
Finnish
• The menu is not displayed when playing photos.
66
VQT4L31
Others
DMRPWT635GL_eng.book 67 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Changing the unit’s settings
You can change the unit’s settings of Digital TV
Tuning, Sound, Display, Connection, Network etc.
in the menu.
Common procedures
1
Press [SETUP].
Setup
Digital TV Tuning
HDD / Disc / USB HDD
Picture
Sound
Display
Connection
Network
Others
Menu list
The locations of the setting items are as follows.
For details on each setting item, please refer to
the following pages.
Digital TV Tuning
Favourites Edit (> 69)
Channel List (> 70)
Auto Setup (> 70)
Download from TV (> 70)
Manual Tuning (> 70)
Update Channel List (> 70)
Child Lock ( Parental Rating ) (> 70)
OK
RETURN
2
3
Signal Condition (> 70)
Select the menu, then press [OK].
Select the item, then make the setting.
(> right)
• Follow the instructions on the screen if
further operations are necessary.
• Depending on the connection or the status
of this unit some items cannot be selected
or changed.
New Channel Message (> 70)
HDD / Disc / USB HDD
Settings for Playback (> 71)
3D BD-Video Playback (> 71)
Soundtrack (> 71)
Subtitles (> 71)
Menu (> 71)
Play Video ( AVCHD ) on BD-RE / BD-R (> 71)
BD-Live (> 71)
To return to the previous screen
Press [RETURN
].
BD-Video Parental Control (> 71)
DVD-Video Parental Control (> 71)
Pure Sound mode (> 71)
Timer Record Start Buffer (> 72)
Timer Record Stop Buffer (> 72)
REWIND LIVE TV (> 72)
Chapter Creation (> 72)
HDD Management (> 72)
Delete all titles (> 72)
Delete all photos (> 72)
Format HDD (> 72)
Settings for USB HDD (> 72)
USB HDD Registration (> 72)
USB HDD Disconnection (> 72)
USB HDD Management (> 72)
Delete all titles (> 72)
Format USB HDD (> 72)
Cancellation of all USB HDD Registrations (> 72)
VQT4L31
67
DMRPWT635GL_eng.book 68 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Changing the unit’s settings
Picture
Network
Still Mode (> 73)
Easy Network Setting (> 76)
Seamless Play (> 73)
Network Settings (> 76)
LAN Connection Mode (> 76)
Sound
Dynamic Range Compression (> 73)
Wireless Settings (> 76)
Connection Setting (> 76)
Downmix (> 73)
Digital Audio Output (> 73)
PCM Down Conversion (> 73)
Dolby D / Dolby D + / Dolby TrueHD (> 74)
DTS / DTS-HD (> 74)
Double Speed Mode Setting ( 2.4GHz ) (> 76)
IP Address / DNS Settings (> 76)
Proxy Server Settings (> 76)
Network Service Settings (> 76)
Lock (> 76)
MPEG (> 74)
BD-Video Secondary Audio (> 74)
Audio Delay (> 74)
Automatic Volume Control (> 76)
Remote Recording Function Settings (> 77)
Remote Recording function (> 77)
Audio Type for Digital Broadcast (> 74)
Device ID (> 77)
Display
On-Screen Information (> 74)
Initialize Device Password (> 77)
Home Network Settings (> 77)
Unit’s Display (> 74)
Home Network function (> 77)
Screen Saver (> 74)
Setting device name (> 77)
Teletext (> 74)
Registration type for remote devices (> 77)
Remote device list (> 77)
Connection
3D Settings (> 74)
3D Type (> 74)
Others
Standby Settings (> 78)
3D AVCHD Output (> 74)
Quick Start (> 78)
3D Playback Message (> 74)
Automatic Standby (> 78)
TV Aspect (> 74)
Automatic Standby after OTR (> 78)
Aspect for 4:3 Video (> 74)
Automatic Standby after Copy (> 78)
TV System (> 74)
RF OUT ( Aerial Signal ) (> 78)
HDMI Connection (> 75)
HDMI Video Format (> 75)
Power Save for Network Standby (> 78)
Remote Control (> 79)
24p Output (> 75)
Clock (> 79)
Deep Colour Output (> 75)
PIN Entry (> 80)
HDMI Audio Output (> 75)
System Update (> 80)
7.1ch Audio Reformatting (> 75)
Software Update in Standby (> 80)
Contents Type Flag (> 75)
Software Update Now ( Broadcast ) (> 80)
VIERA Link (> 75)
Software Update Now ( Internet ) (> 80)
Software Licence (> 80)
System Information (> 80)
Initialize (> 81)
Shipping Condition (> 81)
Default Settings (> 81)
68
VQT4L31
DMRPWT635GL_eng.book 69 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Digital TV Tuning
Favourites Edit
You can create four favourites of channels for
making viewing and recording easier.
Digital TV Favourites Editor
All Digital Channels
Favourites 1
1
2
3
4
5
6
7
Select channel
Add
Page up
CH
Page down
RETURN
Select favourites
Add all
• To delete channels:
Select the channel in the “Favourites” column,
then press [OK].
• Yellow: Delete all channels.
• To change the name of the Favourites list:
1 Press the red button in the “Favourites”
column.
2 Press [3, 4, 2, 1] to select a character,
then press [OK].
Repeat this step to enter other characters.
• Red: Delete a character.
• Blue: Delete all characters.
3 Press [RETURN
].
After editing as follows, save the Favourites.
Press [RETURN ], then press [OK].
• To select the other Favourites list:
Press the green button.
• To add channels to the Favourites list:
Select the channel in the “All Digital Channels”
column, then press [OK]. Repeat this step.
• Yellow: Add all the available channels to the
Favourites. (This function is available only
when there are no channels in the
“Favourites”.)
• To change the order of the channels list:
1 Select the channel in the “Favourites”
column to move, then press the green
button.
2 Select the new position, then press the
green button.
VQT4L31
69
DMRPWT635GL_eng.book 70 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Changing the unit’s settings
Channel List
Update Channel List
You can edit the channel list.
You can update the channel list to the latest one.
Digital TV Channel List
1
2
3
4
5
6
7
Child Lock ( Parental Rating )
Select
Page up
Hide
Page down
RETURN
Tune
Swap
Reveal all
• To hide unwanted channels
1 Select the channel.
2 Press [OK].
The check mark is removed.
• Yellow: Reveal all channels.
• To change the channel number assignment
1 Select the channel to change, then press
the green button.
2 Enter the channel number to reassign with
the number buttons.
3 Press [OK].
• To set the channel manually
1 Press the red button.
2 Refer to “Manual Tuning”. (> below)
You can restrict the viewing of channels
unsuitable to children.
Set a ratings level to limit broadcast viewing and
playback.
• PIN is required to change. (> 23)
Signal Condition
You can check the quality and strength of
signals.
Press [CH W X] to select the channel.
Digital TV Signal Condition
Channel Name
Signal Quality
Signal Strength
0
Network Name
RF Parameter
2
[
RETURN
4
6
]
Good
Poor
Bad
8
10
MHz
Channel Up
Channel Down
CH
• Signal Quality:
Green bar: Good
Yellow bar: Poor
Red bar: Bad
Auto Setup
You can restart the Auto Setup. (> 19)
Select “Yes”, then press [OK].
• The timer recording programmes are cancelled.
Download from TV
Select “Download from TV” when you connect
the unit to a VIERA Link (HDAVI Control 3 or
later) compatible TV.
Select “Yes”, then press [OK].
Manual Tuning
You can add new channels manually.
1 Press [3, 4] to select the physical channel.
• Adjust the frequency by checking the signal
strength and signal quality displays.
2 Press [OK] to start scan.
• The set channel is displayed in the table.
70
VQT4L31
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of the
cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the signal
amplification at your aerial. (For details, consult your
dealer.)
New Channel Message
Set whether to obtain the information
automatically when a new DVB channel is
added.
DMRPWT635GL_eng.book 71 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
HDD / Disc / USB HDD
Settings for Playback
3D BD-Video Playback
Select the playback method of 3D compatible
video software.
Soundtrack
Select the audio language.
• If “Original” is selected, the original
language of each disc will be selected.
• Enter a code with the number buttons when
you select “Other ¢¢¢¢”.
(> 81, Language code list)
Subtitles
Select the language for subtitle.
• If “Automatic” is selected and the language
selected for “Soundtrack” is not available,
subtitles of that language will automatically
appear if available on that disc.
• Enter a code with the number buttons when
you select “Other ¢¢¢¢”.
(> 81, Language code list)
Menu
Select the language for disc menus.
• Enter a code with the number buttons when
you select “Other ¢¢¢¢”.
(> 81, Language code list)
Play Video ( AVCHD ) on BD-RE / BD-R
When playing a disc which contains the
following two video formats;
- High Definition video (AVCHD) recorded by
the Panasonic video camera, etc.,
- High Definition quality video recorded on
this unit,
select which video to play back.
• On:
Play the High Definition video (AVCHD)
• Off:
Play the High Definition quality title
BD-Live
You can restrict Internet access when
BD-Live functions are used.
• If “On ( Limit )” is selected, Internet access
is permitted only for BD-Live contents which
have content owner certificates.
BD-Video Parental Control
Set an age limit of BD-Video play.
• PIN is required to change. (> 23)
DVD-Video Parental Control
Set a rating level to limit DVD-Video play.
• PIN is required to change. (> 23)
Pure Sound mode
You can enjoy movies or music in an
environment more suitable for viewing by
stopping the rotation of the HDD when
playing back commercial BD-Videos,
DVD-Videos or music CDs.
• If “On” is selected, timer recording does not
start during playback BD-Video, DVD-Video
or music CD.
VQT4L31
71
DMRPWT635GL_eng.book 72 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Changing the unit’s settings
Timer Record Start Buffer
This function sets the timer recording to start
earlier than the TV Guide time.
Timer Record Stop Buffer
This function sets the timer recording to stop
later than the TV Guide time.
REWIND LIVE TV
Turn on/off the REWIND LIVE TV function.
• When “Automatic Standby” is set to “Off”
(> 78), “On” cannot be selected.
Chapter Creation
Set the Chapter Creation method.
• Even if “Automatic” is selected, depending on
the programme to be recorded, the chapter
may not be created correctly.
HDD Management
Press and hold [OK] for 3 seconds to show the
following settings.
Delete all titles
Delete all titles (video) on the built-in HDD.
• Delete does not work if one or more titles
are protected.
Delete all photos
Delete all photos on the built-in HDD.
Format HDD
Formatting deletes all contents on the
built-in HDD, and they cannot be restored.
Check carefully before proceeding.
72
VQT4L31
Settings for USB HDD
USB HDD Registration
Register the USB HDD. (> 61)
USB HDD Disconnection
This function puts the USB HDD in a state in
which it can be safely disconnected. (> 61)
USB HDD Management
Press and hold [OK] for 3 seconds to show
the following settings.
Delete all titles
Delete all titles on the USB HDD.
• Delete does not work if one or more
titles are protected.
Format USB HDD
Formatting deletes all contents, and
they cannot be restored. Check
carefully before proceeding.
Cancellation of all USB HDD Registrations
This function cancels the registrations of all
the USB HDDs registered on this unit.
Only do this if you are going to dispose of this
unit.
• Before operation, perform “USB HDD Disconnection”
(> above) and remove the USB HDD.
• It is not possible to play back the content from a
USB HDD whose registration has been cancelled.
DMRPWT635GL_eng.book 73 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Picture
Sound
Still Mode
Dynamic Range Compression
Select the type of picture shown when you pause
play.
• Field:
Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
• Frame:
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected.
(The picture is clearer and finer.)
To lower the dynamic range for playback (e.g., at
night).
• This does not work depending on broadcasts
and recorded titles.
Seamless Play
The segments can be played back seamlessly.
• When “Off” is selected, frame-dropping
between the segments can be avoided, but the
video may freeze for a moment between the
segments.
• Seamless Play function does not work
depending on the condition or the kind of
programme.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
• Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
• There is no effect on “Bitstream” via HDMI AV
OUT and DIGITAL AUDIO OUT terminal.
• The audio will be output in “Stereo” in the
following cases.
- AVCHD playback
- [BD-V] : Playback of clicking sound on the
menu and audio with secondary video in
picture-in-picture mode.
Digital Audio Output
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
• On:
Signals are converted to 48 kHz.
(Choose when the connected equipment
cannot process signals with a sampling
frequency of 96 kHz.)
• Off:
Signals are output as 96 kHz.
• The signals will be converted to 48 kHz
regardless of the setting in the following
cases.
- The signals have a sampling frequency
of over 96 kHz.
- The disc has copy protection.
- “BD-Video Secondary Audio” is set to
“On”. ([BD-V]) (> 74)
VQT4L31
73
DMRPWT635GL_eng.book 74 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Changing the unit’s settings
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
Select the audio signal to output.
• Select “PCM” when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
3D Settings
3D Type
If 3D video cannot be played back in 3D, you
may be able to play it in 3D by changing the
setting.
• Change the settings for 3D on the TV also
when “Side by side” is selected.
BD-Video Secondary Audio
• This setting is not effective for 3D BD-Video.
Turn on/off the clicking sound on the menu
and audio with secondary video.
3D AVCHD Output
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Audio Type for Digital Broadcast
If the programme has more than one track
(Dolby Digital, MPEG, etc.), you can set
priorities.
• This setting will give effect in the following
conditions.
- The default setting when watching
broadcasts.
- The default setting when playing back the
title.
Display
On-Screen Information
Select the time until the channel information
screen (> 24) disappears automatically.
Unit’s Display
Changes the brightness of the unit’s display.
Screen Saver
This is to prevent burn-in on the screen.
Teletext
Select the Teletext (> 25) display mode.
74
Connection
VQT4L31
If 2D AVCHD video is recognised as 3D video
and cannot be played back correctly, you may
be able to play it by changing the setting.
3D Playback Message
Set to display or hide the 3D viewing warning
screen.
TV Aspect
Set to match the type of TV connected.
• Pan & Scan:
Side picture is trimmed for 16:9
picture.
The pictures may be shown in
the letterbox style depending
on the content.
• Letterbox:
Black bands appear for 16:9
picture.
Aspect for 4:3 Video
To play a 4:3 title, set how to show pictures on a
16:9 TV.
TV System
Set in accordance with the TV System for the
connected TV.
DMRPWT635GL_eng.book 75 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
HDMI Connection
HDMI Video Format
You can only select items compatible with the
connected equipment.
• If “Automatic” is selected, the output
resolution best suited to the connected TV
(1080p, 1080i, 720p or 576p/480p) is
automatically selected.
• To enjoy High Quality Video up-converted to
1080p, you need to connect the unit to
1080p compatible HDTV. If this unit is
connected to an HDTV through other
equipment, it must also be 1080p
compatible.
24p Output
When playing BD-Video recorded in
24 frames, this unit displays each frame at
1/24 second intervals–the same interval
originally shot with the film movie.
• This item is effective only when this unit is
connected to a TV supporting 1080/24p
output and “HDMI Video Format” is set to
“Automatic” or “1080p”. (> above)
• When BD-Video images other than 24p are
played, images are output at 60p.
Deep Colour Output
This setting is for selecting whether to use
Deep Colour output when a TV that supports
Deep Colour is connected.
HDMI Audio Output
Select “Off” when connected to an
amplifier/receiver with a DIGITAL AUDIO
OUT terminal.
7.1ch Audio Reformatting
[BD-V]
Surround sound with 6.1 ch or less is
automatically expanded and played back at
7.1 ch.
• If “Off” is selected, sound is played over the
original number of channels. (Note that in
the case of 6.1 ch audio, playback will be at
5.1 ch)
Audio reformatting is enabled in the following
cases:
- When you have selected “PCM” in “Digital
Audio Output”.
- When the audio is Dolby Digital, Dolby
Digital Plus, Dolby TrueHD or LPCM.
Contents Type Flag
If “Automatic” is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
VIERA Link
Select “Off” when you do not want to use
“HDAVI Control”.
VQT4L31
75
DMRPWT635GL_eng.book 76 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Changing the unit’s settings
Network
IP Address / DNS Settings
Check the connection of the network or set
the IP address and DNS.
Easy Network Setting
Press [OK] to start Easy Network Setting. (> 20)
Network Settings
LAN Connection Mode
Select the LAN connection method.
Wireless Settings
This allows to set and check the connection
settings of the Wireless router.
Wireless Settings
Connection Setting
Double Speed Mode Setting ( 2.4GHz )
The current connection settings and status are
displayed.
Current connection settings
Network name
( SSID )
Wireless type
802.11n (2.4GHz/20MHz)
Authentication type
Encryption type
AES
Current status
Connection status
Connected
Reception


1 Encryption type
2 Reception
3 Type of wireless router
Check and set the connection to the Proxy
server.
• Press [OK] to show the respective setting.
Network Service Settings

The Wireless router connection wizard will
be displayed.
Double Speed Mode Setting ( 2.4GHz )
When a 2.4 GHz wireless format is used,
this setting sets the connection speed.
• If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the
same frequency band, and there is
consequently a greater risk of reception
interference. This can cause the
connection speed to drop or the
connection to become unstable.
VQT4L31
• When the router’s DHCP server function is
not activated, check the numbers of other
connected devices such as personal
computers, then assign a number different
from those of other devices for the “IP
Address” and assign the same number for
“Subnet Mask” and “Gateway Address”.
Proxy Server Settings
Connection Setting
76
• To set the IP address and DNS
1 Set “IP Address Auto-assignment” and
“DNS-IP Auto-assignment” to “Off”.
2 Select the item, then press [OK] to show
the respective setting.
Lock
You can restrict using VIERA Connect.
• PIN is required to change. (> 23)
Automatic Volume Control
Volume is adjusted automatically to the
standard volume while using VIERA
Connect.
• Depending on contents, this function will
not work.
• Select “Off” when the audio is warped.
DMRPWT635GL_eng.book 77 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Remote Recording Function Settings
Setting device name
You must register to a service to use this
function.
For details please check the following
website.
http://panasonic.jp/support/global/cs/
It is also possible to change the name of
this unit on the network.
• Select from a preset list
Select the preset name, then press
[OK].
(This site is in English only.)
• Create name
Enter the name.
Refer to “Entering text”. (> 83)
• However, as of February 2013, the service
has not yet been launched.
Remote Recording function
When you set a recording from a mobile
phone or a PC, etc. away from home, set
this function to "On".
Device ID
This is the device ID and device password
required for registering to and using a
service.
Initialize Device Password
The device password for this unit is
initialized.
• When you initialize the device password,
you will not be able to use Remote
Recording function. To use the Remote
Recording function again, you must
re-register to the service.
Registration type for remote devices
• Automatic:
All connected devices on the same
network can access this unit.
• Manual:
Only registered devices can access this
unit.
Remote device list
• To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select “Yes”, then press [OK].
• To deregister equipment
1 Select the registered equipment,
then press [OK].
2 Select “Yes”, then press [OK].
Home Network Settings
You can set the DLNA (Server) function.
(> 56)
Home Network function
You can switch between enable/disable of
the DLNA (Server) and DMR (Media
Renderer) function.
• If “On” is selected, the setting for “Quick
Start” is fixed to “On”. (> 78)
• If “Off” is selected, the setting for
“Remote Recording function” is fixed to
“Off”. (> 77)
• This cannot be set to “On” if the
connection with the wireless broadband
router is not encrypted in the wireless
connection.
• This function cannot be enabled when
“Automatic” is selected in “Registration type for
remote devices”. (> above)
• The maximum number of equipment that can be
registered is 16.
VQT4L31
77
DMRPWT635GL_eng.book 78 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Changing the unit’s settings
Others
Standby Settings
Quick Start
• On:
It is possible to start quickly from standby
mode.
• Off:
Power consumption in standby mode is
minimized. (> 94)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start:
“Quick Start” is activated when the set time
comes. (If the clock has not been set, this
function is not activated at all hours.)
• When “Home Network function” (> 77) or “Remote
Recording function” (> 77) is set to “On”, the setting
for this function is fixed to “On”.
• The setting may be changed to “On” automatically
when the setting for video communication is changed.
(> 59)
Automatic Standby after OTR
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing “Automatic Stop” or
“Recording Time” (> 27).
Automatic Standby after Copy
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (> 55).
RF OUT ( Aerial Signal )
Set whether to output the broadcasting signal
from RF OUT or not while in standby mode
(When “Quick Start” is not activated).
• If “On” is selected, the aerial signal is output
from this unit.
Power Save for Network Standby
You can minimize power consumption in
standby mode even when the “Quick Start”
function is activated. (> 94)
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
• When “REWIND LIVE TV” is set to “On”
(> 72), “Off” cannot be selected.
78
VQT4L31
• When this is set to “On”, startup time when operating
[GUIDE] and [DIRECT NAVIGATOR] from standby
mode will be longer.
DMRPWT635GL_eng.book 79 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Remote Control
Clock
Change the remote control code on the main unit
and the remote control if you place other
Panasonic products close together.
• Use “Set Code1”, the factory set code, under
normal circumstances.
If the time is not set correctly, use the settings
listed in the method below.
• Automatic
This unit usually obtains time and date
information from digital broadcasts.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the
number button ([1] to [6]) for more than
5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
• Region Selection
Select the region where you live to adjust the
standard time.
• The time contained in the broadcast signal is
UTC (Universal time, coordinated).
• Daylight Saving Time
Select time offset from the standard time for
Summer Time.
• If there is a gap between displayed time and
actual time, set this function.
• Manual Setting
1 Select “Off” of “Automatic”, then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the
settings.
VQT4L31
79
DMRPWT635GL_eng.book 80 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Changing the unit’s settings
PIN Entry
System Update
You can set/change the PIN for parental control.
1 Enter your 4-digit PIN with the number
buttons.
2 Enter the new 4-digit PIN with the number
buttons.
• Make a note of PIN in case you forget it.
e.g.,
Software Update in Standby
When you set this unit to standby mode,
software (firmware) updates (> 82) are
downloaded automatically at the time you
have specified.
Software Update Now ( Broadcast )
Refer to ”Software (Firmware) Update”.
(> 82)
PIN Entry
Remember the PIN.
0
0
0
OK
3 Press [OK].
0
Software Update Now ( Internet )
Refer to ”Software (Firmware) Update”.
(> 82)
Software Licence
Information about the software licence is
displayed.
System Information
Display software (firmware), HDAVI Control
version and Wireless Module version (When
using wireless connection only) of this unit.
80
VQT4L31
DMRPWT635GL_eng.book 81 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Initialize
Shipping Condition
All the settings except for basic settings
return to the factory preset.
• The timer recording programmes are also
cancelled.
• The device password is also initialized.
(> 77)
Default Settings
All the settings other than the tuning settings,
clock settings, disc language settings, rating
PIN, remote control code, device password,
etc. return to the factory presets.
Language code list
Abkhazian:
Afar:
Afrikaans:
Albanian:
Amharic:
Arabic:
Armenian:
Assamese:
Aymara:
Azerbaijani:
Bashkir:
Basque:
Bengali; Bangla:
Bhutani:
Bihari:
Breton:
Bulgarian:
Burmese:
Byelorussian:
Cambodian:
Catalan:
Chinese:
Corsican:
Croatian:
Czech:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
Greenlandic:
Guarani:
Gujarati:
Hausa:
Hebrew:
Hindi:
Hungarian:
Icelandic:
Indonesian:
Interlingua:
Irish:
Italian:
Japanese:
Javanese:
Kannada:
Kashmiri:
Kazakh:
Kirghiz:
Korean:
Kurdish:
Laotian:
Latin:
Latvian, Lettish:
6566
6565
6570
8381
6577
6582
7289
6583
6589
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Lingala:
Lithuanian:
Macedonian:
Malagasy:
Malay:
Malayalam:
Maltese:
Maori:
Marathi:
Moldavian:
Mongolian:
Nauru:
Nepali:
Norwegian:
Oriya:
Pashto, Pushto:
Persian:
Polish:
Portuguese:
Punjabi:
Quechua:
Rhaeto-Romance:
Romanian:
Russian:
Samoan:
Sanskrit:
Scots Gaelic:
Serbian:
Serbo-Croatian:
Shona:
Sindhi:
Singhalese:
Slovak:
Slovenian:
Somali:
Spanish:
Sundanese:
Swahili:
Swedish:
Tagalog:
Tajik:
Tamil:
Tatar:
Telugu:
Thai:
Tibetan:
Tigrinya:
Tonga:
Turkish:
Turkmen:
Twi:
Ukrainian:
Urdu:
Uzbek:
Vietnamese:
Volapük:
Welsh:
Wolof:
Xhosa:
Yiddish:
Yoruba:
Zulu:
VQT4L31
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8083
7065
8076
8084
8065
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
81
DMRPWT635GL_eng.book 82 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Software (Firmware) Update
You cannot operate the unit until the update
is complete. Don’t remove the AC mains lead
during the update. Removing the AC mains
lead while the update is in progress may
damage the unit.
Software of this unit can be updated automatically
by the following methods at the specified time.
(Default setting is 3 a.m. > 80, Software Update
in Standby)
- From broadcasts
- From Internet§
If a software (firmware) update is available, a
notification is displayed.
New software version has been found.
The software will be updated automatically
after this unit is switched to standby.
Do not disconnect the AC mains lead.
• It is displayed on the channel information (> 24)
when the Software (Firmware) can be updated
immediately.
e.g.,
1
Now
Rating: G
• To update the software (Firmware) immediately,
use the following function:
- Software Update Now ( Broadcast ):
Software of this unit will be updated from
broadcasts if update information is detected.
- Software Update Now ( Internet )§:
Software of this unit will be updated from
Internet if update information is detected.
§
Network connection and setting are required.
(> 17, 20)
10:30 AM
NEWS
9:00 AM - 11:00 AM
All Digital Channels
Software update
Change category
Dolby D
To execute, press the red button while the
channel information is displayed, and follow the
instructions on the screen.
Update of the software (firmware) will start when
the unit is turned to standby mode.
The unit’s display during the update
e.g.,
• When “FINISH” is displayed, update of the
software (firmware) has completed.
• It may take up to a few hours until the update is completed
depending on the network or broadcast environment.
• The timer recording always takes preference over the
software (Firmware) download; if the timer recording is
scheduled to start, the downloading will be performed at the
next opportunity.
• You can also download the latest software (firmware) from
the following website.
http://panasonic.jp/support/global/cs/
82
VQT4L31
DMRPWT635GL_eng.book 83 ページ
2013年2月4日 月曜日 午後1時25分
Convenient functions
Other operations
Entering text
Switching the aspect ratio of the
screen
Preparation
• Show the “Enter Title Name” screen, etc.
1
Select a character, then press [OK].
Repeat this step to enter other characters.
e.g.,
Name field:
shows the text you have
entered
When the image does not match the screen size
of the TV, you can enlarge the image to fill the
screen.
1
2
3
Press [OPTION].
Select “Aspect”, then press [OK].
Select the item, then press [OK].
Normal:
Normal output
Enter Title Name
_
Side cut:
The black bars on the right and left sides of
the 16:9 image disappear and the image is
enlarged.
Delete
Set
OK
RETURN
Space
• To delete a character:
Select the character in the name field, then
press [PAUSE ;].
Zoom:
The black bars on the top and bottom sides
of the 4:3 image disappear and the image is
enlarged.
• To enter characters with number buttons:
e.g., entering the letter “R”
1 Press [7] to
move to the
seventh row.
2 Press [7] twice
to highlight “R”.
3 Press [OK].
2
5 J
K
7pqrs
7pqrs
6 M N
7 P
8 T
L
7pqrs
O
Q
R
U
V
Press [STOP ∫] (Set).
“Writing...” appears then the screen returns
to the previous screen and so on.
HOLD function
To end partway
Press [RETURN
• This function does not work when watching 3D programme
and playing back 3D title or 3D photo.
• It may also be adjusted using the screen mode of the TV
etc.
• The screen mode is switched to “Normal” in the following
situations:
- when you change the channel
- when you start or end the playback of a title
- when you switch the unit on or to standby mode.
• [BD-V] [DVD-V] “Side cut” does not have any effect.
• When “TV Aspect” (> 74) is set to “Pan & Scan” or
“Letterbox”, the “Zoom” effect is disabled.
]. (Text is not added.)
• If a name is long, parts of it may not be shown in some
screens.
The HOLD function deactivates all buttons on the
unit and remote control.
Press and hold [OK] and [RETURN ]
simultaneously until “X HOLD” appears on the
unit’s display.
Unit’s display
To cancel the HOLD function
Press and hold [OK] and [RETURN ]
simultaneously until “X HOLD” disappears.
VQT4L31
83
DMRPWT635GL_eng.book 84 ページ
2013年2月4日 月曜日 午後1時25分
Troubleshooting
Troubleshooting
Troubleshooting guide
Before requesting service, make the following
checks. If the problem still persists, consult
your dealer for instructions.
Updating to the latest software (firmware) may
solve the problem. (> 82)
The followings do not indicate a problem
with this unit:
• Regular disc rotating sounds or HDD rotating
sounds.
• Poor reception due to atmospheric conditions.
• Image disturbance during search.
• Image disturbance when replacing 3D discs.
• Interruptions in reception due to periodic
broadcasting breaks.
• When you switch the unit on or to standby
mode, there may be an unexpected sound.
General operation
The unit does not work.
• Check the connections. (> 14)
• One of the unit’s safety devices may have been
activated.
Reset the unit as follows:
1 Press [Í/I] on the main unit to switch the unit
to standby.
• If the unit does not switch to standby, press
[Í/I] on the main unit for about 3 seconds.
The unit is forcibly switched to standby.
Alternatively, disconnect the AC mains
lead, wait one minute, then reconnect it.
2 Press [Í/I] on the main unit to switch it on. If
the unit still cannot be operated, consult the
dealer.
Cannot eject a disc.
1 While the unit is in standby mode, press and
hold [OK], the yellow button and the blue
button at the same time for more than
5 seconds.
• “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) until “06 FTO” is
displayed on the unit’s display.
3 Press [OK].
The unit is switched to standby mode
automatically.
• VIERA Link has worked. (> 63, Power off link)
84
VQT4L31
DMRPWT635GL_eng.book 85 ページ
2013年2月4日 月曜日 午後1時25分
Troubleshooting
The remote control does not work.
• The remote control and main unit are using
different codes. Change the code on the remote
control.
Unit's display
Press and hold [OK] and
the indicated number
button at the same time
for more than 5 seconds.
(> 79)
• Software (firmware) is updating when “UPD
/” is displaying on the unit’s display. Wait until
the update is completed. (> 82)
• The HOLD function is activated. (> 83)
Startup is slow.
• Startup takes time in the following situations:
- A disc is inserted.
- The clock is not set.
- Immediately after a power failure or the AC
mains lead is connected.
- When a BD-J application is executing.
- When the “Quick Start” is not activated. (> 78)
• Startup of this unit may be slower depending on
the TV settings.
Displays
“0:00” is flashing on the unit’s display.
• Set the clock. (> 67, 79)
The clock does not display on the unit when
switched to standby.
• The clock does not display when “Quick Start” is
not activated. (> 78)
TV screen and video
Screen size is wrong.
• Check the “TV Aspect” or “Aspect for 4:3 Video”.
(> 74)
• Adjust the aspect ratio setting on TV.
• If you connect to 4:3 TV, set “HDMI Video
Format” to “576p/480p”. (> 67, 75)
The black screen appears on the TV.
• This phenomenon may occur, depending on the
TV setting, when “Quick Start” is activated.
Depending on the TV, this phenomenon may be
prevented by reconnecting to a different HDMI
input terminal.
TV reception is not displayed.
• Broadcast signals are not output from this unit’s
RF OUT terminal. Select “On” in “RF OUT
( Aerial Signal )”. (> 67, 78)
Picture does not appear with the HD quality
although HD setting was made.
• The pictures are output with 576p/480p
depending on the title.
VQT4L31
85
DMRPWT635GL_eng.book 86 ページ
2013年2月4日 月曜日 午後1時25分
Troubleshooting
Troubleshooting guide
The screen changes automatically.
• If “Screen Saver” set to “On”, the screen saver
function will be activated when there is no
operation for 5 minutes or more. (> 74)
There is a lot of image lag when playing video.
• Set “HD optimizer” in the Picture menu to “Off”.
(> 65)
• Set “Audio Delay”. (> 67, 74)
The images do not appear on the TV.
The picture is distorted during play, or video
will not play correctly.
• Check the connections. (> 14)
• Check the settings of the connected TV, etc.
• An incorrect resolution is selected in “HDMI
Video Format”. Reset the setting as follows:
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
• “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) until “04 PRG”
is displayed on the unit’s display.
3 Press and hold [OK] for at least 3 seconds.
Set the item again. (> 67, 75)
• When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD audio are not output properly,
select “Yes” in “Default Settings” and make
proper settings. (> 67, 81)
• The unit’s TV System is different from that of the
disc. While stopped, keep pressing [∫] (STOP)
and [< OPEN/CLOSE] on the main unit for 5 or
more seconds. The system switches from PAL
to NTSC or vice versa.
• Picture may not be seen when more than
4 devices are connected with HDMI cables.
Reduce the number of connected devices.
• The picture may be distorted or a black screen
may appear between scenes recorded with
different aspect ratios.
• Set “Deep Colour Output” (> 67, 75) or
“Contents Type Flag” (> 67, 75) to “Off”.
86
VQT4L31
3D video is not output correctly.
• 3D video may be output correctly by changing
the following settings:
- “3D Type” of “3D Settings” (> 67, 74)
- “Signal Format” (> 40, 3D settings during
playback)
• Check the settings of the connected TV.
• When a non-3D compatible amplifier/receiver is
connected between this unit and a TV, 3D video
is not output. (> 15)
• When the amplifier/receiver which is connected
between this unit and a TV is off, 3D video is not
output. (> 15)
• 3D discs may not be played back correctly due
to the settings of the TV.
• When “HDMI Audio Output” is set to “Off”, 3D
video may not be output correctly. (> 75)
The same video is displayed in each left and
right half of the screen.
• This is a 3D programme of the Side-by-Side
type.
Change the setting as follows if connecting with
a 3D compatible TV:
1 Press [OPTION].
2 Select “3D Settings”, then press [OK].
3 Select “Side by side” in “Signal Format”, then
press [OK].
Sound
No sound.
Distorted sound.
• Check the connections. (> 14)
• Check the settings of the connected TV, etc.
• Press [AUDIO] to select the audio. (> 25, 39)
• To output audio from a device connected with an
HDMI cable, set “HDMI Audio Output” to “On”.
(> 67, 75)
Cannot change audio channel.
• You cannot change the audio channel if “Digital
Audio Output” is set to “Bitstream” (> 73)
DMRPWT635GL_eng.book 87 ページ
2013年2月4日 月曜日 午後1時25分
Troubleshooting
Recording, timer recording and
copying
Cannot record.
Cannot copy.
• Some broadcasts are copyright protected.
• You cannot record/copy to the disc.
Timer recording does not work properly.
• Failed timer recordings are displayed in grey
with
on the Timer Recording screen. (> 32)
When you programme a timer recording, check
the screen icons. If “!” is displayed, this timer
programme may not be recorded because:
- there is not enough space left.
- the number of possible titles has reached its
maximum.
- programmes are deactivated, etc.
Auto Renewal Recording does not work
properly.
• The programme will not be overwritten in the
following cases:
- the programme is protected
- any programme is being played back or copied
- a screen such as DIRECT NAVIGATOR is
displayed
Instead, the programme will be saved as a
separate programme and that will be
overwritten.
A part or whole of a recorded title has been
lost.
• If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the title may be lost or
the HDD may become unusable. We cannot
offer any guarantee regarding lost programmes.
Play
Cannot play back.
• The disc is dirty. (> 10)
• The disc is scratched or marked.
• [BD-R] [BD-RE]
Set “Play Video ( AVCHD ) on BD-RE / BD-R” to
“On” and the playback may be possible (> 67,
71).
• The disc may not be able to play back if it was
not finalized or a Top Menu was not created on
the equipment used for recording.
Audio and video momentarily pause.
• DVD-R DL and +R DL discs have two writable
layers on one side. Video and audio may
momentarily cut out when the unit is switching
layers.
BD-Video or DVD-Video is not played.
• Ensure the disc is for the correct BD-Video
region code or DVD-Video region number, and
is not defective.
You have forgotten your rating PIN.
• The rating level returns to the factory preset.
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
• “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) until “03 VL” is
displayed on the unit’s display.
3 Press [OK].
• “INIT” is displayed on the unit’s display.
Image for the Quick View is not smooth.
• Image may not be played back smoothly in case
of High definition titles.
VQT4L31
87
DMRPWT635GL_eng.book 88 ページ
2013年2月4日 月曜日 午後1時25分
Troubleshooting
Troubleshooting guide
Edit
Photo
Cannot edit.
• You may not be able to edit on the HDD if there
is no available space. Delete any unwanted
titles to create empty space. (> 41)
The contents of the SD card cannot be read.
• Remove the card from the slot and then insert
again. If this does not solve the problem, switch
the unit to standby mode and turn it on again.
Cannot create a playlist.
• Creation or editing of playlists cannot be done
on this unit.
Copying, deleting and setting protection takes
a long time.
• When there are a lot of folders and files, it may
sometimes take a long time.
Photos do not play back normally.
• The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
(> 96)
USB
This unit does not recognize the USB device
correctly.
• If USB device is connected to this unit while
using a video communication the USB device
will not be recognized. Press [EXIT ] and
reconnect USB device.
• If inserted during playback the USB device may
not be recognized by this unit.
Disconnect and reconnect the USB device. If it
still does not recognize the connection, switch
the unit to standby mode and turn it on again.
• USB devices connected using a USB extension
cable other than a dedicated one or a USB hub
may not be recognized by this unit.
• This unit does not recognize USB HDDs other
than those in which the size of one sector is
512-bytes. (For details, consult the dealer of
your USB HDD.)
88
VQT4L31
DMRPWT635GL_eng.book 89 ページ
2013年2月4日 月曜日 午後1時25分
Troubleshooting
TV Guide
The TV Guide information is not displayed
properly.
• Set the clock correctly. (> 67, 79, Clock)
• Some broadcast may not send programme
information.
• There was a programme change, or TV Guide
information from a broadcast station was
possibly not correctly transmitted.
• If signal quality is bad, the TV Guide system
may not be able to receive any data.
Broadcast
Picture regularly breaks up on some
channels.
• Adjust the reception with “Manual Tuning”.
(> 67, 70)
Picture very infrequently breaks up on some
or all channels.
• Electrical atmospheric interference caused by
bad weather may cause pictures to break up
and audio to mute or distort momentarily.
VIERA Link
VIERA Link does not work.
• Some functions may not work depending on the
version of “HDAVI Control” of the connected TV,
etc. This unit supports “HDAVI Control 5”
functions.
• Check the settings of the connected TV, etc.
• If the connection for the equipment connected
with HDMI was changed, or if there was a power
failure or the plug was removed from the
household mains socket, “HDAVI Control” may
not work.
In this case, change TV (VIERA) setting for
“HDAVI Control” again.
• This unit does not support “ONE TOUCH PLAY”
function of the Panasonic AV Control Receiver.
Network
You cannot access this unit from DLNA
compatible equipment on the network.
• Check the network connection and the network
settings. (> 17, 20)
• It may not be possible to connect depending on
the types of the equipment or the status of the
equipment.
VQT4L31
89
DMRPWT635GL_eng.book 90 ページ
2013年2月4日 月曜日 午後1時25分
Troubleshooting
Troubleshooting guide
You cannot play contents properly from DLNA
compatible equipment on the network.
• There may be some video that cannot be played
back on DLNA compatible equipment
depending on the equipment.
• Following titles cannot be played back:
- A title with access restriction
- A title with audio only format
- A title with incompatible format
• Playback via DLNA compatible equipment may
not be performed when this unit is in the
following conditions:
- While playing back a BD-Video
- While simultaneously copying and recording
- While displaying the Setup menu
- While executing functions using a network,
such as “VIERA Connect”
• You cannot play back simultaneously from two
or more items of DLNA compatible equipment.
When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
• Use 802.11n (2.4 GHz) Wireless router.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
• On the “Wireless Settings” screen (> 76), the
continuous lighting of at least four “Reception”
indicators is the target for a stable connection. If
three or fewer indicators are lit or the connection
is being interrupted, change the position or
angle of your Wireless router. If there is no
improvement, connect to a wired network and
perform the “Easy Network Setting” (> 20)
again.
Reset
To return all the settings to the factory preset
Perform “Shipping Condition” or “Default
Settings”. (> 67, 81)
90
VQT4L31
Messages on the unit’s display
The following messages or service numbers
appear on the unit’s display when something
unusual is detected.
SET 
(“∑” stands for a number.)
The remote control and main unit are using
different codes. Change the code on the remote
control. (> 85)
GUIDE
TV Guide data is being downloaded.
HARD ERR
If there is no change after switching the unit to
standby mode and turning it on, consult the
dealer.
NoREAD
• The disc is dirty. (> 10) The unit cannot play.
• The lens cleaner has finished cleaning.
Press [< OPEN/CLOSE] on the main unit to
eject the disc.
DMRPWT635GL_eng.book 91 ページ
2013年2月4日 月曜日 午後1時25分
Troubleshooting
PLEASE WAIT
U59
• Displayed when the unit is started and is
switched to standby mode.
• There was a power failure or the AC plug was
disconnected while the unit was on. The unit is
carrying out its recovery process. Wait until the
message disappears.
The unit is hot.
The unit switches to standby for safety reasons.
Wait for about 30 minutes until the message
disappears.
Do not block the cooling fan on the rear of the
unit.
PROG FULL
U61
There are already 32 timer programmes. Delete
unnecessary timer programmes. (> 32)
(When a disc is not inserted) A malfunction has
occurred. The unit is trying to restore to the
normal operation. Once the message disappears
you can use the unit again.
If it remains displayed, consult the dealer.
REMOVE
The USB device is drawing too much power.
Remove the USB device.
START
Update of the software (firmware) is started.
You cannot operate the unit until the update is
complete. (> 82)
SW-DL
Software (firmware) is downloading.
Download will stop when the unit is turned on, or
the timer recording starts. (> 82)
U76
HDMI cannot be output because it is connected to
a model that does not support copyright
protection.
U77
Due to the current disc not having authorised
copyright information, video output is not
performed.
UNSUPPORT
The media is not supported.
UPD /
(“∑” stands for a number.)
The software (firmware) is being updated.
You cannot operate the unit until the update is
complete. (> 82)
VQT4L31
91
DMRPWT635GL_eng.book 92 ページ
2013年2月4日 月曜日 午後1時25分
Troubleshooting
Troubleshooting guide
U88
(When a disc is inserted) There was something
unusual detected with the disc or the unit. The
unit is trying to restore to the normal operation.
Once the message disappears you can use the
unit again.
If it remains displayed, consult the dealer.
U99
The unit fails to operate properly. Press [Í/I] on
the main unit to switch the unit to standby mode.
Now press [Í/I] on the main unit again to turn the
unit on.
X HOLD
The HOLD function is activated. (> 83)
H or F
(“∑” stands for a number.)
There is something unusual. (The service number
displayed after H and F depends on the unit’s
condition.)
Reset the unit as follows:
1 Disconnect the plug from the household mains
socket, wait a few seconds, then reconnect it.
2 Press [Í/I] to turn the power on. (The unit may
be fixed.)
Request service from the dealer. Inform the
dealer of the service number when requesting
service.
92
VQT4L31
When you experience problems with
Easy Network Setting
If there is any problem, the following message is
displayed on the screen.
Wireless Settings
Display
Check the following
A conflict with • Please wait a few moments,
other devices
and then try again.
occurred.
A time out error • Setting of the Wireless router
occurred.
for MAC Address etc.
• The signal may be weak.
• The SSID and the encryption
key of the Wireless router.
•
Please wait a few moments,
An
and then try again.
authentication
error or a time
out error
occurred.
A device error
occurred.
• If the problem is not solved,
consult your dealer.
DMRPWT635GL_eng.book 93 ページ
2013年2月4日 月曜日 午後1時25分
Troubleshooting
Easy Network Setting ( Home Network
Connection Check )
Display
1. LAN cable
connection or
Wireless setting:
2. IP address
setting:
3. Connection to
gateway:
1. LAN cable
connection or
Wireless setting:
2. IP address
setting:
3. Connection to
gateway:
1. LAN cable
connection or
Wireless setting:
2. IP address
setting:
3. Connection to
gateway:
1. LAN cable
connection or
Wireless setting:
2. IP address
setting:
3. Connection to
gateway:
“Fail”
“Fail”
“Fail”
“Pass”
“Fail”
“Fail”
“Pass”
Check the
following
• Connection
of the LAN
cables
(> 17)
• Settings of
the hub and
router
• Connection
and settings
of the hub
and router
• Settings of
“IP Address /
DNS
Settings”
(> 67, 76)
Easy Network Setting ( Internet Connection
Test )
Display
Cannot find the
server. (B019)
Check the following
• “Primary DNS” and
“Secondary DNS” settings
of “IP Address / DNS
Settings” (> 67, 76)
No connection
• The server may be busy or
could be made to the service may have been
the server. (B020) suspended. Please wait a
few moments, and then try
again.
• Settings of “Proxy Server
Settings” (> 67, 76) and the
router.
“Pass”
“Fail”
“Pass”
“Home
network
available”
“Fail”
VQT4L31
93
DMRPWT635GL_eng.book 94 ページ
2013年2月4日 月曜日 午後1時25分
Reference
Reference
Specifications
Specifications are subject to change without
notice.
∫ General
Dimensions:
430 mm (W)
59 mm (H)
(excluding the projecting parts)
238 mm (D)
(including the projecting parts)
249 mm (D)
Mass:
[PWT635] Approx. 3.0 kg
[PWT530] Approx. 2.9 kg
Power supply:
AC 220 V to 240 V, 50 Hz
Power consumption: [PWT635] Approx. 29 W
[PWT530] Approx. 27 W
Power consumption in standby mode:
“Quick Start” is activated and “Power Save
for Network Standby” is set to “Off”
Approx. 5 W
“Quick Start” is activated and “Power Save
for Network Standby” is set to “On”
Approx. 4 W
“Quick Start” is not activated and
“RF OUT ( Aerial Signal )” is set to “Off”
Approx. 0.2 W
Operating temperature:
Operating humidity range:
∫ TV system
Tuner System:
Country:
Channel Coverage:
∫ Recording system
Video:
5 oC to 40 oC
10 % to 80 % RH
(no condensation)
DVB-T
Australia
VHF 6~12
UHF 27~69
MPEG-2,
MPEG-4 AVC/H.264
Audio:
Dolby Digital
HE-AAC
MPEG
94
VQT4L31
(DR mode: Max 5.1ch (DVB-T))
(DR mode: 2ch (DVB-T))
(DR mode: 2ch)
∫ Audio
Analog audio L/R out (pin jack):
1 pc.
Output level:
Full scale 2.0 Vrms at 1 kHz (< 1 k≠)
Digital audio out (optical):
1 pc.
PCM, Dolby Digital, DTS, MPEG
∫ HDMI terminal
HDMI output (19 pin type A):
1 pc.
PCM, Dolby Digital, DTS, MPEG,
Dolby Digital Plus, Dolby TrueHD,
DTS-HD Master Audio,
DTS-HD High Resolution Audio
• This unit supports “HDAVI Control 5”
function.
∫ Internal HDD capacity
[PWT635] 1 TB
[PWT530] 500 GB
∫ Other terminals
USB Port (Type A):
SD Card Slot:
LAN (Ethernet) Port:
2 pcs.
1 pc.
1 pc.
10BASE-T/100BASE-TX
∫ Wireless LAN
Standard compliance:
IEEE802.11b/g/n
Frequency range:
2.4 GHz band
Security§:
WPA™/WPA2™
(Encryption type: TKIP/AES,
Authentication type: PSK)
WEP
(64 bit/128 bit)
§
This unit supports WPA and WPA2
encryption.
DMRPWT635GL_eng.book 95 ページ
2013年2月4日 月曜日 午後1時25分
Reference
∫ LASER specification
Class 1 LASER Product
Wave length:
405 nm (BDs)
660 nm (DVDs)
790 nm (CDs)
Laser power:
No hazardous radiation is emitted with
the safety protection
∫ Region code
DVD:
BD:
§2
§3
§
#4
Region B
∫ Playable discs
BD-Video (Blu-ray 3D, BD-Live)
BD-ROM Version 2.4
DVD-Video:
DVD-Video format
CD-DA (Audio CD)
BD-RE:
Ver. 2.1, JPEG§1, MPO§1
BD-RE DL:
Ver. 2.1, JPEG§1, MPO§1
BD-R:
Ver. 1.3, LTH type Ver. 1.3,
Xvid§1, MKV§1
BD-R DL:
Ver. 1.3, Xvid§1, MKV§1
DVD-R:
DVD-Video format§3,
AVCHD format§3, JPEG§2, MPO§2,
MP3§2, Xvid§2, MKV§2
DVD-R DL:
DVD-Video format§3,
AVCHD format§3, JPEG§2, MPO§2,
MP3§2, Xvid§2, MKV§2
DVD-RW:
DVD-Video format§3,
DVD Video Recording format,
AVCHD format§3
+R:
Video§3, AVCHD format§3
+R DL:
Video§3, AVCHD format§3
+RW:
Video§3, AVCHD format§3
CD-R/CD-RW:
CD-DA, JPEG§2, MPO§2,
MP3§2, Xvid§2, MKV§2
§1
∫ SD Card
Compatible media:
SD Memory Card§
Format:
SD Card:
only FAT12, FAT16
SDHC Card:
only FAT32
SDXC Card:
only exFAT
Data that can be played:
JPEG, MPO,
AVCHD format, MPEG-2, MP4
BD disc needs to be based on UDF format.
DVD/CD discs need to be based on UDF
or ISO9660 format.
Finalising is necessary.
Includes SDHC/SDXC cards.
Includes mini type cards (need a miniSDTM
adaptor).
Includes micro type cards (need a
microSDTM adaptor).
∫ USB device
USB standard:
USB2.0 High Speed
Format:
FAT12, FAT16, FAT32, NTFS
Data that can be played: MP3, JPEG, MPO,
Xvid, MKV, MP4, MPEG-2
Audio information
The audio output differs depending on which
terminals are connected to the amplifier/receiver,
and the setting on this unit. (> 73, Digital Audio
Output)
• The number of channels listed is the maximum
possible number of output channels when
connected to amplifier/receiver compatible with
the respective audio format.
Terminal
HDMI AV
OUT
DIGITAL
AUDIO
OUT
§1
§2
Digital Audio Output
Bitstream
PCM
BD-Video:
7.1ch PCM§1, 2
Output using
original audio§1
DVD-Video:
5.1ch PCM
Dolby Digital/
Down-mixed 2ch
DTS Digital
PCM
Surround
When “BD-Video Secondary Audio” is set to
“On”, the audio will be output as Dolby Digital,
DTS Digital Surround or 5.1ch PCM.
The audio output is amplified from 5.1ch or
6.1ch to 7.1ch depending on the DTS, Inc.
specifications.
VQT4L31
95
DMRPWT635GL_eng.book 96 ページ
2013年2月4日 月曜日 午後1時25分
Reference
Specifications
About recorded titles
∫ Recording quality and approximate
recording times
Depending on the content being recorded, the
recording time may become shorter than
indicated.
[PWT635]
Information for the files other than recorded
programmes
∫ JPEG/MPO
Playable media:
HDD, BD-RE (SL/DL),
DVD-R, DVD-R DL, CD-R,
CD-RW, SD Card, USB device
HD quality
140 hours
SD quality
264 hours
Compatible pixels:
Between 34k34 and 8192k8192 pixels
(Sub sampling is 4:2:2 or 4:2:0)
Files:
JPEG conforming DCF
(Design rule for Camera File system)
MPO conforming MPF
(Multi Picture Format)
HD quality
69 hours
Maximum numbers of folders and files:
SD quality
131 hours
[PWT530]
Media
• Recording time may vary depending on the
bit rate of broadcasting:
- High Definition (HD) quality: estimated bit
rate is 15 Mbps
- Standard Definition (SD) quality: estimated
bit rate is 8 Mbps
• Regarding recording time remaining:
Remaining time is calculated with a bit rate of
15 Mbps. But the bit rate differs depending
on the broadcast, so the displayed remaining
time might be different from the actual
remaining time.
∫ Maximum number of titles that can be
recorded
999 titles
(When continuously recording for long
durations, titles are automatically divided
every 8 hours.)
96
VQT4L31
HDD
BD-RE
DVD-R
CD-R, CD-RW
SD Card
USB device
Maximum
folders
–
500
500
500
500
500
Maximum
files
20000
10000
10000
10000
10000
10000
• This unit is not compatible with MOTION JPEG or
Progressive JPEG.
DMRPWT635GL_eng.book 97 ページ
2013年2月4日 月曜日 午後1時25分
Reference
∫ MP3
Playable media:
HDD, DVD-R, DVD-R DL,
CD-R, CD-RW, USB device
Compression rate:
32 kbps to 320 kbps
Sampling rate:
16 kHz, 22.05 kHz, 24 kHz,
32 kHz, 44.1 kHz, 48 kHz
Maximum numbers of folders and files:
Media
HDD
DVD-R
CD-R, CD-RW
USB device
Maximum
folders
–
300
300
300
Maximum
files
40000
3000
3000
3000
∫ SD-Video (Standard Definition)
Playable media:
SD Card, USB device
Codec:
MPEG-2
File Format:
SD-Video format§
used on Standard Definition Camera
(Panasonic and some other’s)
§
SD-Video Entertainment Video Profile
∫ HD-Video (High Definition)
Playable media:
SD Card, USB device
Codec:
MPEG-4 AVC/H.264
File Format:
AVCHD format conforming
∫ MP4
Playable media:
SD Card, USB device
MPEG-4 AVC/H.264:
Up to High Profile, Level 4.2
Video resolution:
Up to 1920k1080
MPEG-4 AAC-LC
Sampling rate:
8 kHz to 48 kHz
Number of audio channel:
1 or 2
∫ MKV
Playable media:
BD-R (SL/DL), DVD-R,
DVD-R DL,CD-R, CD-RW, USB device
MPEG-4 AVC (H.264) profile is up to High
Profile, Level 4.
AAC-LC, MP3, Dolby Digital audio, DTS,
PCM, Vorbis and FLAC can be decoded.
Maximum number of folders:
300 folders
(including the root folder)
Maximum number of files:
200 files
VQT4L31
97
DMRPWT635GL_eng.book 98 ページ
2013年2月4日 月曜日 午後1時25分
Reference
Licenses
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and
Sony Corporation.
Copyright 2004-2010 Verance Corporation. CinaviaTM is a Verance Corporation trademark. Protected by U.S. Patent 7,369,677
and worldwide patents issued and pending under license from Verance Corporation. All rights reserved.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living
Network Alliance.
DVB and the DVB logos are trademarks of the DVB Project.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol
together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and
non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1
Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial
activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be
implied for any other use. Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
SDXC Logo is a trademark of SD-3C, LLC.
The Skype name, associated trade marks and logos and the “S” logo are trade marks of Skype.
VIERA Connect is a trademark of Panasonic Corporation.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
HDAVI ControlTM is a trademark of Panasonic Corporation.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
Java is a registered trademark of Oracle and/or its affiliates.
Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries.
98
VQT4L31
DMRPWT635GL_eng.book 99 ページ
2013年2月4日 月曜日 午後1時25分
Reference
This product incorporates the following software or technology:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software developed by the Independent JPEG Group,
(4) the software developed by the Freetype Project,
(5) the software licensed under the GNU LESSER General Public License (LGPL) and/or,
(6) open sourced software other than the software licensed under the LGPL,
(7) Windows Media digital right management technology (WM-DRM) licensed by Microsoft Corporation or its affiliates.
For the software categorized as (5), please refer to the terms and conditions of LGPL, as the case may be at
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
In addition, the software categorized as (5) are copyrighted by several individuals. Please refer to the copyright notice of those
individuals at
http://panasonic.net/avc/oss/diga/FCRCP13A.html
The LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to any third party who contacts us at the contact
information provided below, for a charge no more than our cost of physically performing source code distribution, a complete
machine-readable copy of the corresponding source code covered under LGPL.
Contact Information
oss-cd-request@gg.jp.panasonic.com
Source code covered under LGPL is also freely available to you and any other member of the public via our website below.
http://panasonic.net/avc/oss/diga/FCRCP13A.html
For the software categorized as (5) and (6), please refer to the applicable license terms included in the “Software Licence”
menu on product.
Further, for WM-DRM categorized as (7), please be aware of the following.
(a) This product is protected by certain intellectual property rights of Microsoft Corporation and third parties. Use or distribution
of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary
and third parties.
(b) Content providers are using the digital rights management technology for Windows Media contained in this device
(“WM-DRM”) to protect the integrity of their content (“Secure Content”) so that their intellectual property, including copyright, in
such content is not misappropriated. This device uses WM-DRM software to play Secure Content (“WM-DRM Software”). If the
security of the WM-DRM Software in this device has been compromised, owners of Secure Content (“Secure Content Owners”)
may request that Microsoft revoke the WM-DRM Software’s right to acquire new licenses to copy, display and/or play Secure
Content.
Revocation does not alter the WM-DRM Software’s ability to play unprotected content. A list of revoked WM-DRM Software is
sent to your device whenever you download a license for Secure Content from the Internet or from a PC. Microsoft may, in
conjunction with such license, also download revocation lists onto your device on behalf of Secure Content Owners.
Vorbis, FLAC, WPA Supplicant
The software licenses are displayed when “Software Licence” in the Setup menu is selected. (> 80)
VQT4L31
99
DMRPWT635GL_eng.book 100 ページ 2013年2月4日 月曜日 午後1時25分
Reference
Limited Warranty
Panasonic Warranty
1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its
Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of
Panasonic, the product is found to be faulty within the warranty period.
2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised
Distributors or Dealers and only where the products are used and serviced within Australia or it's territories. Warranty cover only
applies to service carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when
warranty service is requested.
3. This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as
noted in the operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal
domestic use only and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation,
accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm
activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alterations),
introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the
product, exposure to abnormally corrosive conditions or any foreign object or matter having entered the product.
4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase:
(a) Cabinet Part(s)
(e) DVD, Blu-ray or Recordable Discs
(b) Video or Audio Tapes
(f) Video / Audio Heads from wear and tear in normal use
(c) SD cards or USB devices
(g) Information stored on Hard Disk Drive, USB stick or SD card
(d) User replaceable Batteries
(h) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s)
etc
5. Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not cover
(a) Internet and or DLNA connection / setup related problems
(b) Access fees and or charges incurred for internet connection
(c) The use of incompatible software or software not specifically stipulated in the product operations manual;
and
(d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet or
any other device.
6. To claim warranty service, when required, you should:
Telephone Panasonic’s Customer Care Centre on 132600 or visit our website referred to below and use the Service Centre
Locator for the name/address of the nearest Authorised Service Centre.
Send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of
purchase date. Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged
by you.
Note that home or pick-up/delivery service is available for the following products in the major metropolitan areas of Australia or the
normal operating areas of the nearest Authorised Service Centres:
Plasma/LCD televisions / displays (screen size greater than 103 cm)
7. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or
re-installation of a product, including costs related to the mounting, de-mounting or remounting of any screen, (and any other
ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or replacement of and
do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related to such installation,
de-installation, re-installation or transit.
Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however,
coverage will vary dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone
our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator.
In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the
Australian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have a refund or to have
the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are
also entitled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a
major failure.
If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by
contacting the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair
or replace the product and will do so in a reasonable period of time from receiving notice from you.
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)
SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
If you require assistance regarding warranty conditions or any other enquiries, please visit the Panasonic Australia
website www.panasonic.com.au or contact by phone on 132 600
If phoning in, please ensure you have your operating instructions available.
Panasonic Australia Pty. Limited
ACN 001 592 187 ABN 83 001 592 187
1 Innovation Road, Macquarie Park NSW 2113
PRO-031-F11 Issue: 4.0
100
VQT4L31
01-01-2011
DMRPWT635GL_eng.book 101 ページ 2013年2月4日 月曜日 午後1時25分
Reference
Index
A
D
Aspect . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74, 83
Audio
Broadcasts . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Digital Audio . . . . . . . . . . . . . . . . . . . . . . . . . 95
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . 19, 70
AVCHD
Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Playback . . . . . . . . . . . . . . . . . . . . . . . . . 33, 36
Delete
Delete BD-Video data . . . . . . . . . . . . . . . . . . 37
Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Delete all photos
HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Delete all titles
HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
USB HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Delete BD-Video data . . . . . . . . . . . . . . . . . . 37
DIRECT NAVIGATOR
Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Disc
Media information . . . . . . . . . . . . . . . . . . . . . . 6
DLNA
Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Media Renderer . . . . . . . . . . . . . . . . . . . . . . 58
Server . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 77
DVD-Video
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
DVD-Video Parental Control . . . . . . . . . . . . . 71
B
BD-Live . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
BD-Video
BD-Live . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 71
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
BD-Video Parental Control . . . . . . . . . . . . . . 71
C
Channel information . . . . . . . . . . . . . . . . . . . 24
Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Chapter . . . . . . . . . . . . . . . . . . . . . . . . 35, 39, 44
Chapter Creation . . . . . . . . . . . . . . . . . . . . . . 72
Child Lock ( Parental Rating ) . . . . . . . . . . . . 70
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Connection
Amplifier/receiver . . . . . . . . . . . . . . . . . . . . . 15
AUDIO OUT terminal . . . . . . . . . . . . . . . . . . 16
Basic connections . . . . . . . . . . . . . . . . . . . . . 14
DIGITAL AUDIO OUT terminal . . . . . . . . . . . 16
HDMI cable . . . . . . . . . . . . . . . . . . . . . . . 14, 15
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Copy (Music) . . . . . . . . . . . . . . . . . . . . . . . . . 50
Copy (Photo) . . . . . . . . . . . . . . . . . . . . . . . . . 49
Copy (Video) . . . . . . . . . . . . . . . . . . . . . . . . . . 45
HD Video (AVCHD) . . . . . . . . . . . . . . . . . . . . 54
SD Video (MPEG2) . . . . . . . . . . . . . . . . . . . . 55
E
Easy Network Setting . . . . . . . . . . . . . . . 20, 76
Easy setting . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Edit (Music) . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Edit (Photo) . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Edit (Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 44
Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 42
Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . 83
F
Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Format
HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
USB HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
FUNCTION MENU . . . . . . . . . . . . . . . . . . . . . 22
VQT4L31
101
DMRPWT635GL_eng.book 102 ページ 2013年2月4日 月曜日 午後1時25分
Reference
Index
H
P
HD Video (AVCHD)
Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 36
HDAVI Control . . . . . . . . . . . . . . . . . . . . . 63, 75
HDD
Delete all photos . . . . . . . . . . . . . . . . . . . . . . 72
Delete all titles . . . . . . . . . . . . . . . . . . . . . . . . 72
Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Media information . . . . . . . . . . . . . . . . . . . . . . 6
HDMI cable . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
HOLD function . . . . . . . . . . . . . . . . . . . . . . . . 83
PAUSE LIVE TV . . . . . . . . . . . . . . . . . . . . . . . 25
Photo
Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Slideshow . . . . . . . . . . . . . . . . . . . . . . . . 46, 52
PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Playback menu . . . . . . . . . . . . . . . . . . . . . . . 64
Playback (Music)
Audio CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Recorded on HDD . . . . . . . . . . . . . . . . . . . . . 51
Playback (Photo) . . . . . . . . . . . . . . . . . . . . . . 46
Slideshow . . . . . . . . . . . . . . . . . . . . . . . . 46, 52
Playback (Video)
AVCHD . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 36
BD-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
BD-Video Parental Control . . . . . . . . . . . . . . 71
Changing audio . . . . . . . . . . . . . . . . . . . . . . . 39
Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
DVD-Video . . . . . . . . . . . . . . . . . . . . . . . . . . 36
DVD-Video Parental Control . . . . . . . . . . . . . 71
MKV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Playlist created on other equipment . . . . . . . 36
Recorded video contents . . . . . . . . . . . . . . . 33
Status message . . . . . . . . . . . . . . . . . . . . . . 38
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Xvid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Protection
HOLD function . . . . . . . . . . . . . . . . . . . . . . . 83
Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Pure Sound Mode . . . . . . . . . . . . . . . . . . . . . 71
J
JPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
L
Language code list . . . . . . . . . . . . . . . . . . . . 81
M
Manual Tuning . . . . . . . . . . . . . . . . . . . . . . . . 70
Media
Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 10
USB HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
USB memories . . . . . . . . . . . . . . . . . . . . . 6, 10
Media Renderer . . . . . . . . . . . . . . . . . . . . . . . 58
Menu screen . . . . . . . . . . . . . . . . . . . . . . . . . . 36
MKV
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
MPEG2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
MPO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Music
Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
N
Network
BD-Live . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DLNA (Client) . . . . . . . . . . . . . . . . . . . . . . . . 57
DLNA (Server) . . . . . . . . . . . . . . . . . . . . . 56, 77
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Software (Firmware) Update . . . . . . . . . . . . . 82
VIERA Connect . . . . . . . . . . . . . . . . . . . . . . . 59
102
VQT4L31
Q
Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
DMRPWT635GL_eng.book 103 ページ 2013年2月4日 月曜日 午後1時25分
Reference
R
T
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Recording quality . . . . . . . . . . . . . . . . . . . . . 96
Recording time . . . . . . . . . . . . . . . . . . . . . . . 96
Timer recording . . . . . . . . . . . . . . . . . . . . . . . 29
Recording quality . . . . . . . . . . . . . . . . . . . . . 96
Remote control . . . . . . . . . . . . . . . . . . . . . . . 12
HOLD function . . . . . . . . . . . . . . . . . . . . . . . . 83
Manufacturer and Code No. . . . . . . . . . . . . . 18
Remote control code . . . . . . . . . . . . . . . . . . . 79
TV operation . . . . . . . . . . . . . . . . . . . . . . . . . 18
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . 81, 87, 90
REWIND LIVE TV . . . . . . . . . . . . . . . . . . . 25, 72
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 74
Timer recording . . . . . . . . . . . . . . . . . . . . . . . 29
Auto Renewal Recording . . . . . . . . . . . . . . . 30
Manually programming timer recording . . . . 30
Tuning
Channel List . . . . . . . . . . . . . . . . . . . . . . . . . 70
Manual Tuning . . . . . . . . . . . . . . . . . . . . . . . 70
Parental Rating . . . . . . . . . . . . . . . . . . . . . . . 70
Signal condition . . . . . . . . . . . . . . . . . . . . . . . 70
TV Guide
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Timer recording . . . . . . . . . . . . . . . . . . . . . . . 29
TV System . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
S
SD Card
Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Media information . . . . . . . . . . . . . . . . . . . 6, 10
miniSD / microSD . . . . . . . . . . . . . . . . . . . . . 10
SD Video (MPEG2)
Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Setting
Auto Setup . . . . . . . . . . . . . . . . . . . . . . . 19, 70
Easy Network Setting . . . . . . . . . . . . . . . 20, 76
Easy setting . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Digital TV Tuning . . . . . . . . . . . . . . . . . . . . . . 69
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
HDD / Disc / USB HDD . . . . . . . . . . . . . . . . . 71
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
SkypeTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Slideshow . . . . . . . . . . . . . . . . . . . . . . . . . 46, 52
Software (Firmware) Update . . . . . . . . . . . . . 82
Subtitles
Broadcasts . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
U
Unit’s display
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
USB HDD
Cancellation of all USB HDD Registrations . . . . . 72
Delete all titles . . . . . . . . . . . . . . . . . . . . . . . . 72
Disconnection . . . . . . . . . . . . . . . . . . . . . 61, 72
Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Media information . . . . . . . . . . . . . . . . . . . . . . 6
Registration . . . . . . . . . . . . . . . . . . . . . . . 61, 72
USB memories
Media information . . . . . . . . . . . . . . . . . . . 6, 10
V
Video
Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
DIRECT NAVIGATOR . . . . . . . . . . . . . . . . . 33
Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Playback . . . . . . . . . . . . . . . . . . . . . . . . . 33, 36
Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
VIERA Connect . . . . . . . . . . . . . . . . . . . . . . . 59
VIERA Link . . . . . . . . . . . . . . . . . . . . . . . . 63, 75
X
Xvid
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
VQT4L31
103
DMRPWT635GL_eng.book 104 ページ 2013年2月4日 月曜日 午後1時25分
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask
for the correct method of disposal.
The recording and playback of content on this or any other device may require permission from the owner of the copyright
or other such rights in that content. Panasonic has no authority to and does not grant you that permission and explicitly
disclaims any right, ability or intention to obtain such permission on your behalf. It is your responsibility to ensure that your
use of this or any other device complies with applicable copyright legislation in your country. Please refer to that legislation
for more information on the relevant laws and regulations involved or contact the owner of the rights in the content you wish
to record or playback.
Personal information handling
To provide functions and services of this unit, a device ID, device password and usage history
information are stored and managed securely in an appropriate security environment of Panasonic.
Please note that usage history and other information may be collected for purposes such as
improving products and services in such a way that individuals cannot be identified.
Panasonic Corporation
Web Site: http://panasonic.net
p
VQT4L31
F0213MD0
© Panasonic Corporation 2013
Download PDF