Canon | PowerShot E1 White | User guide | Canon PowerShot E1 White User guide

(EC255) CDP-E065_Guide_E.book Page 1 Friday, July 4, 2008 10:35 AM
Y
P
O
Camera User Guide
C
© CANON INC. 2008
ENGLISH
(EC255) CDP-E065_Guide_E.book Page 2 Friday, July 4, 2008 10:35 AM
Checking the Package Contents
Check if the following items are included in your camera package. If anything
is missing, contact the retailer where you purchased the camera.
Camera
AA-size Alkaline
Batteries (x2)
Memory Card
(32MB)
Interface Cable
IFC-400PCU
AV Cable
AVC-DC400
Wrist Strap
WS-DC6
Warranty Card
“Canon Customer
Support” Leaflet
Canon Digital Camera
Solution Disk
C
Getting Started
Y
P
O
Also refer to the electronic manuals (PDF) on the CD-ROM.
•Camera User Guide
This Guide
•Direct Print User Guide
Read when you want to connect the camera to a printer and print.
•Software Starter Guide
Read when you want to connect the camera to a computer.
Explains how to install and use the software on the Canon Digital
Camera Solution Disk.
Download ZoomBrowser EX/ImageBrower Software Guide (PDF)
from:
http://web.canon.jp/imaging/information-e.htm
• You can use the included memory card to try out your new camera and
take some test shots.
• Adobe Reader must be installed to view the PDF manuals.
2
(EC255) CDP-E065_Guide_E.book Page 3 Friday, July 4, 2008 10:35 AM
Conventions Used in this Guide
• Language that displays on the screen appears inside [ ].
• Buttons on the camera body are represented by the following icons.
button
FUNC./SET (Function/Set) button
button
button
button
MENU button
Y
P
O
DISP. (Display) button
•
: Troubleshooting tips for common problems.
•
: Hints for getting more out of your camera.
•
: Notes for preventing malfunction.
•
: Supplemental explanation.
• (p. xx): xx stands for reference page number.
• This guide assumes all functions are at their default settings unless
otherwise noted.
• This camera can use various types of memory cards. These are
collectively referred to as memory cards in this guide.
C
3
(EC255) CDP-E065_Guide_E.book Page 4 Friday, July 4, 2008 10:35 AM
Read This First
Test Shots
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and
should never be used in a manner that infringes upon or contravenes
international or domestic copyright laws and regulations. Please be advised
that in certain cases the copying of images from performances, exhibitions,
or commercial properties by means of a camera or other device may
contravene copyright or other legal rights even if the image was shot for
personal use.
Warranty Limitations
Y
P
O
This camera’s warranty is only effective in the country of sale. If there is a
problem with the camera while abroad, please return it back to the country of
sale before proceeding with a warranty claim to a Canon Customer Support
Help Desk.
For Canon Customer Support contacts, please see the customer
support list supplied with your camera.
LCD Monitor
C
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. The
camera is not damaged. This also has no effect on the recorded image.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. The camera is not damaged.
4
(EC255) CDP-E065_Guide_E.book Page 5 Friday, July 4, 2008 10:35 AM
Y
P
O
Capture Your Best Memories
C
5
(EC255) CDP-E065_Guide_E.book Page 6 Friday, July 4, 2008 10:35 AM
What Do You Want to Do?
Shoot
4
● Shoot, Leaving It to the Camera to Make Settings . . . . . . . . . . . 22
● Just Taking Pictures (Easy mode) . . . . . . . . . . . . . . . . . . . . . . . 54
● Shooting Various Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . 55–58
- Take good shots of people
I F C w P
Portraits
(p. 55)
At night
(p. 55)
Kids and pets At the beach Snowscapes
(p. 55)
(p. 57)
(p. 57)
Y
P
O
H t
y Z
C
- Take good landscapes
J
Landscape
(p. 55)
,
Nightscape
(p. 57)
O U
Foliage
(p. 57)
Sunset
(p. 57)
- Shoot various other scenes
Indoors
(p. 56)
Fireworks
(p. 58)
Aquarium
(p. 58)
Low light
(p. 58)
● Focus on faces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
● Shoot in places where I cannot use the flash (turn off the flash) . . 59
● Shoot pictures with me in them too (self-timer). . . . . . . . . . . . . . 60
● Insert the date and time into my pictures . . . . . . . . . . . . . . . . . . 63
● Take close-up pictures of subjects (macro shooting) . . . . . . . . . 64
● Take sepia toned or black and white pictures . . . . . . . . . . . . . . . 75
● Change the size of picture I want to take (recording pixels) . . . . 70
● Take pictures continuously . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
● Shoot without camera shake (image stabilization) . . . . . . . . . . 124
● Shoot without camera shake even in low light conditions
(high ISO speed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58, 72
6
(EC255) CDP-E065_Guide_E.book Page 7 Friday, July 4, 2008 10:35 AM
What Do You Want to Do?
1
View
● Look at my pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
● Automatically play back pictures (slide show). . . . . . . . . . . . . . . 98
● Look at pictures on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
● Quickly search pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
● Erase pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 101
● Protect pictures from accidental erasure. . . . . . . . . . . . . . . . . . 102
Shoot/View Movies
E
Y
P
O 2
● Shoot movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
● Watch my movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Print
C
● Easily print my pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Save
● Save images to a computer . . . . . . . . . . . . . . . . . . . . 31, 108, 109
Other
3
● Turn off sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
7
(EC255) CDP-E065_Guide_E.book Page 8 Friday, July 4, 2008 10:35 AM
Table of Contents
Chapters 1 – 3 explain the basic operations and frequently used functions of
this camera. Chapters 4 – 9 explain the advanced functions letting you learn
further as you read them in order.
Checking the Package Contents .......2
Conventions Used in this Guide ........3
Read This First ..................................4
What Do You Want to Do? ................6
Safety Precautions...........................10
LCD Monitor Precautions.................12
Formatting Memory Cards .............. 49
Changing Sounds............................ 51
Changing the Image Display Time .. 52
1 Getting Started ....................13
9 Just Taking Pictures
(Easy Mode)............................... 54
Shooting Various Scenes................ 55
K Shooting Special Scenes....... 56
! Turning the Flash Off.................. 59
h Turning the Flash On................... 59
Q Using the Self-Timer................... 60
Zooming in on Far Away Subjects .. 61
Inserting the Date and Time ..... 63
e Shooting Close-ups (Macro) ....... 64
u Shooting Far Away Subjects...... 65
Inserting the Batteries and
Memory Card ..............................14
Setting the Date and Time ...............18
Setting the Display Language..........20
Pressing the Shutter Button.............21
Taking Pictures ................................22
Viewing Images ...............................24
Erasing Images................................25
Printing Images................................26
Shooting Movies ..............................28
Viewing Movies................................30
Transferring Images to a Computer ... 31
Accessories .....................................36
Separately Sold Accessories ...........38
C
Y
P
O
2 Learning More......................39
Components Guide..........................40
Indicators .........................................42
Power Saving Function
(Auto Power Down) ....................42
Information Displayed on the Screen . 43
Switching the Display.......................45
FUNC. Menu - Basic Operations .....46
MENU Functions - Basic Operations.. 47
Resetting the Camera......................48
8
3 Shooting Special Scenes and
Using Common Functions
.............................................. 53
4 Making Settings for the
Images You Want ........... 67
G Shooting in Program AE ............. 68
W Continuous Shooting ................. 69
Changing the Recording Pixels
(Image Size)............................... 70
Changing the Image Quality
(Compression Ratio) .................. 70
Changing the ISO Speed ................ 72
Adjusting the Tone (White Balance) 73
Adjusting the Brightness
(Exposure Compensation) ......... 74
Changing the Tone of an Image
(My Colors) ................................ 75
(EC255) CDP-E065_Guide_E.book Page 9 Friday, July 4, 2008 10:35 AM
Changing the Composition to Shoot
(Focus Lock) .............................. 76
Shooting Using the Viewfinder........ 77
Shooting Using a TV ....................... 77
$ Customizing the Self-Timer ........ 78
5 Getting More Out of Your
Camera............................ 79
Changing the AF Frame.................. 80
Checking the Focus and People's
Expressions (AF-Point Zoom).... 82
0 Selecting the Face to Focus On
(Face Select and Track) ............ 83
Checking the Focus Immediately after
Shooting (Focus Check) ............ 84
Changing the Metering Mode.......... 85
% Shooting with AF Lock .............. 85
& Shooting with AE Lock .............. 86
( Shooting with FE Lock .............. 87
Slowing Down the Shutter Speed
(Long Shutter Mode).................. 88
C
Checking the Focus and People's
Expressions (Focus Check
Display) ...................................... 99
Viewing Images on a TV ............... 100
+ Changing Image Transitions..... 101
/ Erasing All Images.................... 101
: Protecting Images................... 102
= Resizing Images ....................... 103
\ Rotating Images........................ 104
] Correcting Red-Eye Effect ........ 105
^ Attaching Sound Memos .......... 107
Transferring Images to a Computer ..108
{ Designating Images for Transfer
(DPOF)..................................... 109
Designating Images for Printing
(DPOF)..................................... 111
Y
P
O
8 Customizing the Camera
....................................... 117
Changing Functions ...................... 118
Changing Shooting Functions ....... 121
6 Using Various Functions
for Movies....................... 89
9 Useful Information for Using
the Camera ................... 125
Changing the Movie Mode .............. 90
Changing the Image Quality in X... 90
Shooting Movies With Fixed
Exposure Settings...................... 91
Other Shooting Functions ............... 92
Playback Functions......................... 92
Using Household Power................ 126
Using a Supplementary Flash ....... 126
Handling Precautions .................... 127
You Think There is a Problem....... 128
Error Messages ............................. 132
Functions Available in
Each Shooting Mode................ 134
Menus............................................ 136
Specifications ................................ 140
Index.............................................. 142
7 Using Various Playback
and Other Functions...... 93
Quickly Finding Images................... 94
; Organizing Images by Category
(My Category) ............................ 96
k Magnifying Images ..................... 97
. Viewing Slideshows .................... 98
9
(EC255) CDP-E065_Guide_E.book Page 10 Friday, July 4, 2008 10:35 AM
Safety Precautions
• Before using the camera, please ensure that you read the safety precautions
described below. Always ensure that the camera is operated correctly.
• The safety precautions noted on the following pages are intended to prevent injuries
to yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold accessories you
use.
Warnings Denotes the possibility of serious injury or death.
Cautions
Denotes the possibility of injury or damage to the equipment.
Warnings
Equipment
Y
P
O
• Do not look through the camera viewfinder at bright light sources (the sun,
etc.).
Exposure to the intense light may damage eyesight.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child's neck could result in asphyxiation.
Memory card, day/date battery: Dangerous if accidentally swallowed. If this occurs,
contact a doctor immediately.
• Do not trigger the flash in close proximity to human eyes.
Exposure to the intense light produced by the flash may damage eyesight. In
particular, remain at least one meter (39 inches) away from infants when using the
flash.
• Do not attempt to disassemble or alter any part of the equipment that is not
expressly described in this guide.
• To avoid the risk of injury, do not touch the interior of the camera if it has been
dropped or otherwise damaged.
• Stop operating the camera immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
• Do not allow liquids or foreign objects to enter the camera.
This could result in fire or electrical shock.
If liquid or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the batteries.
• Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
• Use only recommended power sources.
C
10
(EC255) CDP-E065_Guide_E.book Page 11 Friday, July 4, 2008 10:35 AM
Safety Precautions
Batteries
• Use only recommended batteries.
• Do not place batteries near or in direct flame.
• Do not let batteries come into contact with water (e.g. sea water) or other
liquids.
• Do not attempt to disassemble, alter or apply heat to batteries.
• Avoid dropping or subjecting batteries to severe impacts.
This may cause explosions or leaks, resulting in fire, injury and damage to the
surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing
contacts these substances, immediately flush with water and seek medical
assistance.
• Before you discard batteries, cover the terminals with tape or other insulators.
Contacting other metal materials in waste containers may lead to fire or explosions.
Y
P
O
Cautions
• Do not aim the camera at bright light sources (the sun, etc.).
Doing so may cause malfunction or damage the image sensor (CCD).
• Be careful not to bang the camera or subject it to strong impacts or shocks
when hanging it by the strap.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• When using the camera on a beach or at a windy location, be careful not to
allow dust or sand to enter the camera.
This may cause the camera to malfunction.
• Avoid using, placing or storing the camera in the following places.
- Places subject to strong sunlight.
- Places subject to temperatures above 40° C (104° F).
- Humid or dusty areas.
These could cause leakage, overheating or explosion, resulting in fire, burns or other
injuries. High temperatures may also cause deformation of the casing.
• Remove and store the batteries when you are not using the camera.
If the batteries are left inside the camera, damage caused by leakage may occur.
• Do not use the flash with dirt, dust or other items stuck to the surface, or when
covering the flash with your fingers or clothing.
This may cause the camera to malfunction.
C
11
(EC255) CDP-E065_Guide_E.book Page 12 Friday, July 4, 2008 10:35 AM
LCD Monitor Precautions
• Do not sit in a chair with the camera in your pocket.
Doing so may cause malfunction or damage the LCD monitor.
• When putting the camera in your bag, ensure that hard objects do not come into
contact with the LCD monitor.
If this occurs, it may cause malfunction or damage the LCD monitor.
• Do not attach accessories to the strap.
Doing so may cause malfunction or damage the LCD monitor.
C
12
Y
P
O
(EC255) CDP-E065_Guide_E.book Page 13 Friday, July 4, 2008 10:35 AM
1
Getting Started
This chapter explains how to prepare for shooting and shooting in
A mode, as well as how to play back, erase and print images.
Y
P
O
Attaching the Wrist Strap/Holding the Camera
• Use the included strap to avoid dropping the camera during use.
• Keep your arms tight against your body while holding the camera firmly by
the sides. Be sure that your fingers do not touch the flash.
C
Wrist strap
13
(EC255) CDP-E065_Guide_E.book Page 14 Friday, July 4, 2008 10:35 AM
Inserting the Batteries and Memory Card
Insert the included batteries and memory card into the camera.
Check the card’s write-protect tab.
● If the memory card has a write-protect tab,
you will not be able to take images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Open the cover.
● Slide and hold the cover lock
slide and open the cover
C
, then
as shown.
Y
P
O
Insert the batteries.
● Insert the batteries with (+) and (-) sides
oriented correctly.
Insert the memory card.
● Insert the memory card with the label in
Label
14
the direction shown until it clicks into
place.
● Be sure the card is oriented correctly.
Inserting the card in the wrong direction
could damage the camera.
(EC255) CDP-E065_Guide_E.book Page 15 Friday, July 4, 2008 10:35 AM
Inserting the Batteries and Memory Card
Close the cover.
● Close the cover
and press downward
as you slide it until it clicks into place
.
Y
P
O
Removing the Memory Card
● Push the memory card until you hear a
C
click, then release and pull out the card.
15
(EC255) CDP-E065_Guide_E.book Page 16 Friday, July 4, 2008 10:35 AM
Inserting the Batteries and Memory Card
Approximate Number of Shots That Can Be Taken
Power Source
LCD monitor on*
LCD monitor off
Playback Time (Hours)
Number of
Shots
Alkaline Batteries
(Supplied)
NiMH Batteries
(Sold Separately)
220
650
8
450
1000
10
* The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Depending on the shooting conditions, the actual number of shots that can be taken
may be less.
• Depending on the brand of alkaline batteries used, the number of shots that can be
taken may vary widely.
• The values for NiMH batteries are based on fully charged batteries.
Compatible Batteries
Y
P
O
AA-size alkaline batteries and Canon AA-size NiMH batteries (sold separately)
(p. 36).
Can any other batteries be used?
C
We cannot recommend the use of any other batteries than those listed above
because performance varies widely.
Why use NiMH batteries?
They last much longer than alkaline batteries, especially in cold weather.
Battery Charge Indicator
When battery charge is low, an icon or message will appear on the screen. If the
batteries are charged, the icon or message will not display.
Display
“Change the batteries.”
16
Summary
Battery charge is low. Prepare new batteries to
continue using the camera.
The batteries are depleted. Insert new
batteries.
(EC255) CDP-E065_Guide_E.book Page 17 Friday, July 4, 2008 10:35 AM
Inserting the Batteries and Memory Card
Approximate Number of Shots That Can Be Saved in a Memory
Card
Memory Card
Number of Shots
32 MB (supplied)
11
2 GB
749
8 GB
2994
• Values are based on a camera at default settings.
• The number of shots that can be saved will vary depending on camera settings, the
subject and the memory card used.
How do you check the number of shots that can be saved?
The number of shots that can be saved appear on the screen when the camera
is in Shooting Mode (p. 22).
C
Y
P
O
Number of shots that
can be saved
Compatible Memory Cards
• SD memory cards
• SDHC memory cards
• MultiMediaCards
• MMCplus memory cards
• HC MMCplus memory cards
What is the Write-Protect Tab?
SD and SDHC memory cards have a write-protect tab. If this tab is in the locked
position, “Card Locked!” will appear on the screen and you will not be able to
take or erase images.
17
(EC255) CDP-E065_Guide_E.book Page 18 Friday, July 4, 2008 10:35 AM
Setting the Date and Time
The Date/Time menu will appear the first time the camera is turned on. Since
the date and time recorded into your images are based on these settings, be
sure to make them.
Turn on the camera.
● Press the power button.
X The Date/Time menu will appear.
Set the Date and Time.
● Press the qr buttons to select a setting.
● Press the op buttons to set a value.
C
Y
P
O
Make the setting.
● Press the m button.
X Once the date and time have been set,
the Date/Time menu will close.
18
(EC255) CDP-E065_Guide_E.book Page 19 Friday, July 4, 2008 10:35 AM
Setting the Date and Time
Changing the Date and Time
You can change the date and time as needed.
Display the menus.
● Press the · button.
Select [Date/Time] in the 3 tab.
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Date/
Time], then press the m button.
C
Y
P
O
Change the date and time.
● Follow Steps 2 and 3 on the left page to
change the date and time.
● To close the menus, press the · button.
Reappearing Date/Time Menu
• Set the correct date and time. If you have not set the date and time, the Date/
Time menu will appear each time you turn on the camera.
• If you removed the batteries from the camera, it is possible that the Date/Time
settings are deleted after approximately 3 weeks. If this occurs, set the date and
time again.
This camera is equipped with a built-in rechargeable lithium ion battery to
save the Date/Time settings. You can recharge the battery when inserting
AA-size alkaline batteries or using the separately sold AC adapter, within
approximately 4 hours. You do not need to turn the camera on for
charging the battery.
19
(EC255) CDP-E065_Guide_E.book Page 20 Friday, July 4, 2008 10:35 AM
Setting the Display Language
You can change the language displayed on the screen menus and
messages.
Set to Playback mode.
● Press the 1 button.
Display the language menu.
● Press and hold the m button
press the · button
, then
.
Y
P
O
Set the display language.
● Press the opqr buttons to select a
language, then press the m button.
X Once the display language has been set,
C
the language menu will close.
You can also change the language by pressing the · button, in the 3
tab, selecting [Language].
20
(EC255) CDP-E065_Guide_E.book Page 21 Friday, July 4, 2008 10:35 AM
Pressing the Shutter Button
The shutter button has two stops. To take images that are in focus, be sure
to first press the shutter button lightly (halfway) to focus, then take the shot.
Press halfway (lightly to the first
stop).
X The camera focuses and automatically
makes necessary settings for shooting,
such as adjusting brightness and color.
X When the camera focuses, it will beep
twice and the indicator will light green.
Press fully (to the second stop).
Y
P
O
X The camera takes the shot.
If you just press the shutter button fully without pausing halfway, the
images you take may not be in focus.
C
21
(EC255) CDP-E065_Guide_E.book Page 22 Friday, July 4, 2008 10:35 AM
Taking Pictures
The camera can automatically make all settings so that you can shoot simply
by pressing the shutter button (Auto mode).
Turn on the camera.
● Press the power button.
X The start-up sound will play, and the startup image will appear.
● Pressing the power button again will turn
off the camera.
Select a shooting mode.
● Set the mode dial to A.
Y
P
O
Compose the shot of your subject.
● Moving the zoom lever towards i will
C
zoom in on your subject making it appear
larger. Moving the lever towards j will
zoom out from your subject making it
appear smaller.
Focus.
● Press the shutter button lightly (halfway)
to focus.
X When the camera focuses, it will beep
twice and the indicator will light green
(orange when the flash will fire).
Indicator
X Green AF frames appear where the
subject is in focus.
AF Frame
22
(EC255) CDP-E065_Guide_E.book Page 23 Friday, July 4, 2008 10:35 AM
Taking Pictures
Shoot.
● Press the shutter button fully.
X The camera will play the shutter sound
and shoot. The flash will automatically fire
in low light conditions.
X The indicator will blink green while the
image is recorded to the memory card.
X The image will appear on the screen for
about two seconds. You can continue
shooting while the image displays.
What if...
Y
P
O
• nothing displays when the camera is turned on?
Press the ⁄ button to turn on the screen (p. 43).
• the camera does not play any sounds?
Pressing the ⁄ button while turning on the camera power will turn off all
sounds except for warning sounds. To turn on sound, press the · button,
select the 3 tab, then select [Mute]. Use the qr buttons to select [Off].
C
• the image comes out dark even the flash fired when shooting?
Subject is too far away for the flash to reach. Shoot the image within the
effective flash range of approximately 30 cm – 4.0 m (1.0 – 13 ft.) at maximum
wide angle (j side), and approximately 30 cm – 2.0 m (1.0 – 6.6 ft.) at
maximum telephoto (i side).
• the indicator blinks yellow and the camera only beeps once when the
shutter button is pressed halfway?
Your subject is too close. Move about 50 cm (1.6 ft.) or more away from your
subject. Press the shutter button again halfway, making sure the indicator does
not blink yellow before taking the picture.
• the screen turns off when you take an image?
When flash recharging begins, the indicator may blink orange and the screen
may turn off. When recharging ends, the screen turns on again.
• the lamp lights?
The lamp (Red-Eye Reduction Lamp) lights in order to reduce the red-eye effect
that occurs when shooting in dark conditions using the flash. It also emits when
assisting the focus (AF-assist Beam).
23
(EC255) CDP-E065_Guide_E.book Page 24 Friday, July 4, 2008 10:35 AM
Viewing Images
You can view the images you have taken on the screen.
Set to Playback mode.
● Press the 1 button.
● The last image you took will appear.
Select an image.
● Pressing the q button will cycle through
the images in the reverse order they were
taken.
● Pressing the r button will cycle through
the images in the order they were taken.
● The images change more quickly if you
keep the qr buttons pressed, but they
will appear coarse.
C
Y
P
O
Recommendation for beginners: 9 Easy mode
Just setting the mode dial to 9 (Easy mode) allows you to shoot and playback images.
This mode is recommended for beginners, who are not familiar using cameras.
Set the mode dial to 9.
Shoot.
● Press the shutter button lightly (halfway)
to focus.
X A green AF frame displays where the
Easy mode
subject is in focus.
● Press the shutter button fully to shoot.
Viewing Images.
● Press the 1 button.
● Press the qr buttons to display the
images you want to view.
24
(EC255) CDP-E065_Guide_E.book Page 25 Friday, July 4, 2008 10:35 AM
Erasing Images
You can select and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
Set to Playback mode.
● Press the 1 button.
X The last image you shoot will appear.
Select an image to erase.
● Press the qr buttons to select an image
to erase.
C
Y
P
O
Erase the image.
● Press the p button.
● Press the qr buttons to select [Erase],
then press the m button.
X The displayed image will be erased.
● To exit instead of erasing, press the qr
buttons to select [Cancel], then press the
m button.
25
(EC255) CDP-E065_Guide_E.book Page 26 Friday, July 4, 2008 10:35 AM
Printing Images
You can easily print the images you have taken if you connect the camera to
a PictBridge compliant printer (sold separately).
Items to Prepare
• Camera and PictBridge compliant printer (sold separately)
• Interface cable supplied with the camera (p. 2)
Turn off the camera and printer.
Connect the camera to the printer.
● Open the camera’s terminal cover and
insert the smaller plug of the interface
cable in the direction shown.
● Insert the cable’s larger plug into the
printer. For connection details, refer to the
user guide provided with the printer.
Y
P
O
Turn on the printer.
C
Turn on the camera.
● Press the 1 button to turn on the camera.
X
will appear on the screen, and the
26
c button will light blue.
(EC255) CDP-E065_Guide_E.book Page 27 Friday, July 4, 2008 10:35 AM
Printing Images
Select an image to print.
● Press the qr buttons to select an image.
Print images.
● Press the c button.
X Printing will start and the c button will
blink blue.
● If you want to print additional images,
repeat Steps 5 and 6 after printing has
completed.
● After printing has completed, turn off the
camera and printer, and unplug the
interface cable.
Y
P
O
Refer to the Direct Print User Guide for details on printing, including
printing with direct print compatible printers.
C
Canon-Brand PictBridge Compliant Printers (Sold Separately)
By connecting your camera to one of the Canon-brand PictBridge compliant
printers below, you can print your images just like photos without having to
use a computer.
Compact Photo Printers
(SELPHY series)
Bubble Jet Printers
(PIXMA series)
For more information, visit your nearest Canon retailer.
27
(EC255) CDP-E065_Guide_E.book Page 28 Friday, July 4, 2008 10:35 AM
Shooting Movies
Setting the mode dial to E (Movie) allows you to shoot movies.
Set to Movie mode.
● Set the mode dial to E.
● Confirm that
displays on the screen.
Recordable Time
Y
P
O
Compose the shot of your subject.
● Moving the zoom lever towards i will
C
zoom in on your subject making it appear
larger. Moving the lever towards j will
zoom out from your subject making it
appear smaller.
Focus.
● Press the shutter button lightly (halfway)
to focus.
X When the camera focuses, it will beep
twice and the indicator will light green.
Indicator
28
(EC255) CDP-E065_Guide_E.book Page 29 Friday, July 4, 2008 10:35 AM
Shooting Movies
Shoot.
● Press the shutter button fully. The camera
will start shooting the movie.
● Once shooting begins, take your finger off
the shutter button.
REC.] and the elapsed time will appear
on the screen.
● Do not touch the microphone while shooting.
● Do not press any buttons other than the
shutter button. The sound that buttons
make will be recorded in the movie.
X[
Elapsed Time
Microphone
C
Y
P
O
Stop shooting.
● Press the shutter button fully again.
X The camera will beep once and stop
shooting the movie.
X The indicator will blink green while the
movie is recorded to the memory card.
X Shooting will automatically stop when the
memory card fills.
Approximate Recording Time
Memory Card
Recording Time
32 MB (supplied)
15 sec.
2 GB
16 min. 47 sec.
8 GB
1 hr. 7 min. 6 sec.
• Recording times are based on a camera at default settings.
• Remaining time can be checked on the screen in Step 1.
29
(EC255) CDP-E065_Guide_E.book Page 30 Friday, July 4, 2008 10:35 AM
Viewing Movies
You can view the movies you have shot on the screen.
Set to Playback mode.
● Press the 1 button.
X The last image or movie you shot will
appear.
Select a movie.
● Press the qr buttons to select a movie,
then press the m button.
●
appears on movies.
X The movie control panel will appear.
C
Y
P
O
Play the movie.
● Press the qr buttons to select
, then
press the m button.
● Pressing the m button will pause/resume
the movie.
● Press the op buttons to adjust the
volume.
X After the movie finishes,
appears.
30
(EC255) CDP-E065_Guide_E.book Page 31 Friday, July 4, 2008 10:35 AM
Transferring Images to a Computer
You can use the included software to transfer the images you have taken to
a computer.
Items to Prepare
• Camera and computer
• Canon Digital Camera Solution Disk supplied with the camera (p. 2)
• Interface cable supplied with the camera (p. 2)
System Requirements
Install the software on a computer meeting the following requirements.
Windows
OS
Y
P
O
Windows Vista (including Service Pack 1)
Windows XP Service Pack 2
Computer model
The above OS should be pre-installed on computers with builtin USB ports.
CPU
Windows Vista:
Pentium 1.3 GHz or higher
Windows XP:
Pentium 500 MHz or higher
RAM
Windows Vista:
512 MB or more
Windows XP:
256 MB or more
Interface
USB
Free Hard Disk Space • Canon Utilities
- ZoomBrowser EX:
200 MB or more
- PhotoStitch:
40 MB or more
Display
1,024 x 768 pixels/High Color (16 bit) or better
C
Macintosh
OS
Computer model
Mac OS X (v10.4 – v10.5)
The above OS should be pre-installed on computers with builtin USB ports.
CPU
RAM
PowerPC G4/G5 or Intel Processor
Mac OS X v10.5:
512 MB or more
Mac OS X v10.4:
256 MB or more
Interface
USB
Free Hard Disk Space • Canon Utilities
- ImageBrowser:
300 MB or more
- PhotoStitch:
50 MB or more
Display
1,024 x 768 pixels/ 32,000 Colors or better
31
(EC255) CDP-E065_Guide_E.book Page 32 Friday, July 4, 2008 10:35 AM
Transferring Images to a Computer
Preparations
Windows XP and Mac OS X v10.4 are used for these explanations.
Install the software.
Windows
Place the CD-ROM in the computer’s
CD-ROM drive.
Begin installation.
● Click [Easy Installation], and follow the
Y
P
O
onscreen instructions to proceed with the
installation.
Click [Restart] or [Finish].
● When you click [Restart], the computer
C
will restart.
Remove the CD-ROM.
● Remove the CD-ROM when your desktop
screen appears.
Macintosh
● Place the CD-ROM in the computer's CDROM drive and double-click the
.
X The screen on the left displays.
● Click [Install], and follow the onscreen
instructions to proceed with the
installation.
32
(EC255) CDP-E065_Guide_E.book Page 33 Friday, July 4, 2008 10:35 AM
Transferring Images to a Computer
Connect the camera to the
computer.
● Turn off the camera.
● Open the camera’s terminal cover and insert
the smaller plug of the interface cable in the
direction shown.
● Insert the cable’s larger plug into the
computer’s USB port. For connection
details, refer to the user guide provided
with the computer.
Turn on the camera.
Y
P
O
● Press the 1 button to turn on the camera.
X The connection between the camera and
computer is now established.
Open CameraWindow.
C
Windows
● Select [Canon CameraWindow] and click
[OK].
X CameraWindow will appear.
● If CameraWindow does not appear, click
the [Start] menu and select [All Programs]
or [Programs], followed by [Canon
Utilities]
[CameraWindow]
[CameraWindow]
[CameraWindow].
X The Direct Transfer menu appears on the
camera’s screen, and the c button will
light blue.
33
(EC255) CDP-E065_Guide_E.book Page 34 Friday, July 4, 2008 10:35 AM
Transferring Images to a Computer
Macintosh
X CameraWindow will appear.
● If it does not appear, click the
[CameraWindow] icon on the Dock (the
bar which appears at the bottom of the
desktop).
X The Direct Transfer menu appears on the
camera’s screen, and the c button will
light blue.
You cannot shoot while the Direct Transfer menu displays.
Y
P
O
Transferring Images with a Computer
Transfer images.
● Click [Transfer Untransferred Images].
X All images not previously transferred will
be transferred to the computer.
● After the transfer finishes, turn off the
camera and unplug the cable.
● For further operations, refer to the
Software Starter Guide.
C
34
(EC255) CDP-E065_Guide_E.book Page 35 Friday, July 4, 2008 10:35 AM
Transferring Images to a Computer
Transferring Images with the Camera
Select [New Images].
● Press the op buttons to select [New
Images].
● If the screen on the left is not showing,
press the · button.
Y
P
O
Transfer images.
● Press the c button.
X All images not previously transferred will
C
be transferred to the computer.
● After the transfer finishes, turn off the
camera and unplug the cable.
● For further operations, refer to the
Software Starter Guide.
Transferred images will be sorted by date and saved in separate folders in
the My Picture folder for Windows or the Picture folder for Macintosh.
35
(EC255) CDP-E065_Guide_E.book Page 36 Friday, July 4, 2008 10:35 AM
Accessories
Supplied with Camera
AV Cable AVC-DC400*1
Interface Cable IFC-400PCU*1
Wrist Strap
WS-DC6
C
AA-size Alkaline Batteries
(x2)
Y
P
O
Battery and Charger Kit
CBK4-300*3
Battery Charger
CB-5AH
AA-size NiMH
batteries
(NB-3AH x4)
Memory Card
(32 MB)
Canon Digital Camera
Solution Disk
AC Adapter kit
ACK800
Compact Power
Adapter CA-PS800
Power Cord
*1 Also available for purchase separately.
*2 See the user guide supplied with the printer for more information on the printer and
interface cables.
*3 Battery and Charger Kit CBK4-200 may also be used.
36
(EC255) CDP-E065_Guide_E.book Page 37 Friday, July 4, 2008 10:35 AM
Accessories
Video IN Terminal
Audio IN Terminal
TV
Bubble Jet Printers*2
(PIXMA series)
Y
P
O
USB Card Reader
C
High-Power Flash
HF-DC1
Compact Photo Printers*2
(SELPHY series)
Windows/Macintosh
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
37
(EC255) CDP-E065_Guide_E.book Page 38 Friday, July 4, 2008 10:35 AM
Separately Sold Accessories
The following camera accessories are sold separately.
Some accessories are not sold in some regions, or may no longer be
available.
Power Supplies
• Battery and Charger Kit CBK4-300
This kit includes both a dedicated charger unit and four rechargeable AA-size
NiMH (nickel metal hydride) batteries. Recommended for powering the camera
for an extended period of time.
The batteries (NiMH Battery NB4-300) are also available separately.
• AC Adapter Kit ACK800
This kit lets you power the camera using household power. Recommended for
powering the camera for an extended period of time or when connecting to a
computer. Cannot be used to charge the batteries inside the camera.
Other Accessories
Y
P
O
• High-Power Flash HF-DC1
This attachable supplementary flash can illuminate subjects that are too distant
for the built-in flash.
C
When connecting to and using a household power outlet, use only AC
Adapter Kit ACK800 (rated input: 100-240 V AC 50/60 Hz, rated output:
3.15 V DC). Using anything else can cause fire, overheating, or electrical
shock.
38
(EC255) CDP-E065_Guide_E.book Page 39 Friday, July 4, 2008 10:35 AM
2
Learning More
This chapter explains the camera parts and basic operations.
C
Y
P
O
39
(EC255) CDP-E065_Guide_E.book Page 40 Friday, July 4, 2008 10:35 AM
Components Guide
a
b
c
d
Zoom Lever
Shooting: j (Wide Angle) /
i (Telephoto) (p. 22)
Playback: g (Index) /
k (Magnify) (p. 94)
Lamp (AF Assist Beam, Red-Eye
Reduction Lamp, Self-Timer Lamp)
(pp. 23, 122, 123)
Microphone (p. 29)
Lens
Mode Dial
C
e
f
g
h
i
j
Shutter Button (p. 21)
Mode Dial
Power Button (p. 21)
Flash (p. 59)
Tripod Socket
Memory Card Slot /Battery Cover
(p. 14)
Memory Card Slot /Battery Cover
Lock (p. 14)
Wrist Strap Mount (p. 13)
Y
P
O
k
l
Turn the mode dial to change the shooting mode. Turning the mode dial
while in Playback mode will switch to the Shooting mode.
Program AE mode (p. 67)
You can set various functions in
order to take the picture you want.
Movie mode (pp. 28, 89)
Auto mode (p. 22)
The camera makes settings
automatically for shooting.
40
Easy mode (p. 54)
Various Scenes mode (p. 53)
You can shoot worry-free pictures
just by pressing the shutter button.
You can shoot with optimal settings
for the scene you wish to shoot.
(EC255) CDP-E065_Guide_E.book Page 41 Friday, July 4, 2008 10:35 AM
Components Guide
Viewfinder (p. 77)
Indicators (p. 42)
Speaker
Screen (LCD monitor) (p. 43)
1 (Playback) Button
DC IN (Power input) Terminal
A/V OUT (Audio/Video output)
DIGITAL Terminal (pp. 26, 33, 100)
0 (Face Select) Button (p. 83)
c (Print/Share) Button
(pp. 26, 124)
a
b
c
d
e
f
g
h
i
1
Button
C
j
k
l
· (MENU) Button (p. 47)
⁄ (DISP.) Button (pp. 43, 45)
ISO (p. 72) / d (Jump) (p. 95) /
o Button
m
e (Macro) (p. 64) / u (Infinity) (p. 65) /
q Button
m (Function/Set) Button
h (Flash) (p. 59) / r Button
W (Continuous) (p. 69) / Q (Selftimer) (p. 60) /a (Single Image Erase)
(p. 25) /p Button
Y
P
O
n
o
p
When the lens is extended, you can use the 1 button to switch between the
Shooting and Playback modes. When the lens is retracted, you can use the
button to turn the camera on and off in Playback mode.
Lens is extended
1
Shooting mode
Lens is retracted
Power off
Playback mode
1
Playback mode
41
(EC255) CDP-E065_Guide_E.book Page 42 Friday, July 4, 2008 10:35 AM
Indicators
The indicators on the back of the camera (p. 41) will light or blink under the
following conditions.
Position Colors
Status
Lights
Upper
Indicator
Green
Blinks
Orange
Lower
Yellow
Indicator
Lights
Blinks
Lights
Blinks
Operation Status
Shooting preparation complete (p. 22) /when connected
to a computer/display turned off
Camera starting up/image recording/reading/erasing/
transferring (when connected to a computer)
Shooting preparation complete (flash on) (p. 22)
Camera shake warning, flash charging (p. 59)
Shooting in Macro/AF Lock mode
When the camera cannot focus (p. 23)
When the indicator blinks green, data is being recorded/read/erased or
various information is being transmitted.
Do not turn off the power, open the memory card slot/battery cover, shake
or jolt the camera. These actions may corrupt the image data, or cause
the camera or memory card to malfunction.
C
Y
P
O
Power Saving Function (Auto Power Down)
To save battery power, the camera shuts down automatically when it is not
operated for a certain time.
Power Saving Shooting Mode
About 1 minute after the camera is not operated, the screen will turn off.
After about 3 more minutes, the lens will retract and the power turns off.
When the screen has turned off but the lens has not retracted yet, pressing
the shutter button halfway (p. 21) turns on the monitor and shooting can be
continued.
Power Saving Playback mode
About 5 minutes after the camera is not operated, the power turns off.
• You can turn off the Power Saving Function (p. 118).
• You can adjust the time before the screen turns off (p. 119).
42
(EC255) CDP-E065_Guide_E.book Page 43 Friday, July 4, 2008 10:35 AM
Information Displayed on the Screen
Shooting (Information Display)
a
b
c
d
e
f
g
h
i
j
k
l
m
n
*
Y
P
O
Shooting Mode
Exposure Compensation/Long
Shutter mode (pp. 74, 88)
White Balance (p. 73)
My Colors (p. 75)
Metering Mode (p. 85)
Compression Ratio (p. 70)
Recording Pixels (p. 70)
Digital Tele-Converter (p. 62)
Zoom Factor (p. 61)
Macro/Infinity Mode (pp. 64, 65)
ISO Speed (p. 72)
Flash (p. 59)
Red-Eye Correction (p. 122)
Drive Mode (pp. 60, 69, 78)
C
o
p
q
r
s
t
u
v
w
x
y
z
Auto Rotate* (p. 120)
Battery Charge Indicator (p. 16)
Grid Lines (p. 123)
AF Frame (p. 80)
Spot AE Point Frame (p. 85)
AE Lock/FE Lock (pp. 86, 87)
AF Lock (p. 76)
Create Folder (p. 120)
Still Images: Recordable Shots (p. 17)
Movies: Remaining Time /Elapsed
Time (p. 29)
Exposure Shift Bar (p. 91)
Shutter Speed
Aperture Value
Image Stabilizer (p. 124)
:Standard,
:Right side down,
:Left side down
This function may not operate correctly when the camera is pointed straight up or down.
43
(EC255) CDP-E065_Guide_E.book Page 44 Friday, July 4, 2008 10:35 AM
Information Displayed on the Screen
Playback (Detailed Information Display)
Y
P
O
Print List (p. 111)
Auto Category/My Category (p. 96)
Shooting Mode
Shutter Speed
Exposure Compensation (p. 74)
White Balance (p. 73)
Histogram
Sound Memo (p. 107)
Compression Ratio (p. 70)
Recording Pixels (p. 70)
Metering Mode (p. 85)
Battery Charge Indicator (p. 16)
Folder Number-File Number (p. 119)
Displayed image number and total
number of images
a
b
c
d
e
f
g
h
i
j
k
l
m
n
C
o
p
q
r
s
t
u
v
w
x
y
ISO Speed (p. 72)
Aperture Value
Flash (p. 59)
Macro/Infinity Mode (pp. 64, 65)
File Size (p. 71)
Still Images: Recording Pixels (p. 71)
Movies: Movie Length (p. 91)
Red-Eye Correction /Resize
(pp. 102, 105)
Protect (p. 102)
My Colors (p. 75)
Red-Eye Correction (pp. 105, 122)
Shooting Date and Time (p. 18)
Histogram
High
Low
Dark
44
Bright
● The graph that appears in Detailed
Information Display is called the
histogram. The histogram shows the
distribution of brightness of an image.
When the graph approaches the right
side, the image is bright, but when it
approaches the left side, the image is
dark, and in this way you can check the
exposure.
(EC255) CDP-E065_Guide_E.book Page 45 Friday, July 4, 2008 10:35 AM
Switching the Display
You can switch the display using the ⁄ button.
Shooting
No Information Display
Playback
No Information
Display (Off)
Information Display
Y
P
O
Simple Information
Display
C
Detailed Information
Display
Off
Focus Check
Display
You can also switch the display by pressing the ⁄ button while the
image displays shortly after shooting. However, the Simple Information
will not display. You can set the display that displays first. Press the ·
button to select the 4 tab. Then choose [Review Info].
Display for Shooting in Dark Conditions during Shooting
The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
brightness of the image on the screen, and the brightness of the actual
image recorded may be different. Noise may appear and the movement of
the subject on the screen may appear somewhat jagged. This has no effect
on the recorded image.
Overexposure Warning during Playback
In Detailed Information Display, overexposed areas of the image flash on the
screen.
45
(EC255) CDP-E065_Guide_E.book Page 46 Friday, July 4, 2008 10:35 AM
FUNC. Menu - Basic Operations
You can set various functions using the FUNC. menu. The settings that you
can choose from the FUNC. menu are different depending on the shooting
mode (p. 40).
Select a shooting mode.
● Set the mode dial to the desired shooting
mode.
Display the FUNC. menu.
● Press the m button.
Select a menu item.
● Press the op buttons to select a menu
Y
P
O
item.
X The selectable settings for the menu item
appear at the lower part of the screen.
Select a setting.
Menu Items
● Press the qr buttons to select a setting.
● Some option settings are only available by
C
pressing the ⁄ button after selecting a
setting.
Make the setting.
● Press the m button.
X Returns you to the shooting screen and
the setting you made will display.
For more information on the various shooting modes and combination
settings with the FUNC. menu, refer to page 134.
46
(EC255) CDP-E065_Guide_E.book Page 47 Friday, July 4, 2008 10:35 AM
MENU Functions - Basic Operations
Various functions can be set from the menu. The menu items are organized
under categorized tabs, and the displayed tabs and menu items change,
depending on the Shooting (p. 40) or Playback mode (p. 41).
Display the menu.
● Press the · button.
Select a tab.
● Press the qr buttons to select a tab.
● You can also move the zoom lever (p. 40)
Y
P
O
left or right to select a tab.
Select a menu item.
● Press the op buttons to select a menu
item.
C
● Some settings can only be set after
switching the screen using the m button.
Select a setting.
● Press the qr buttons to select a setting.
Make the settings.
● Press the · button.
X Returns you to the standard screen.
For more information on the tabs and menu items, refer to page 136.
47
(EC255) CDP-E065_Guide_E.book Page 48 Friday, July 4, 2008 10:35 AM
Resetting the Camera
When you have mistakenly made a setting, you can reset the camera to the
default settings.
Display the menu.
● Press the · button.
Select [Reset All].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Reset
All], then press the m button.
Y
P
O
Reset settings.
● Press the qr buttons to select [OK], then
press the m button.
X The camera will reset to the default
settings.
C
Are there functions that cannot be reset?
• FUNC. menu
White balance data recorded with the Custom White Balance function (p. 73).
• The 3 tab
[Date/Time] (p. 18), [Language] (p. 20), [Video System] (p. 100)
48
(EC255) CDP-E065_Guide_E.book Page 49 Friday, July 4, 2008 10:35 AM
Formatting Memory Cards
You should use this camera to format a new memory card, or a memory card
that has been used with other devices, before using it. Formatting a memory
card erases all data on the memory card. You cannot retrieve the erased
data. Execute adequate caution before formatting a memory card.
Display the menu.
● Press the · button.
Select [Format].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Format],
then press the m button.
C
Y
P
O
Format the memory card.
● Press the qr buttons to select [OK], then
press the m button.
X The memory card will be formatted.
X When formatting has finished, the screen
will return to the menu display.
49
(EC255) CDP-E065_Guide_E.book Page 50 Friday, July 4, 2008 10:35 AM
Formatting Memory Cards
Low Level Format
Perform low level formatting when you think that the recording/reading
speed of a memory card has dropped.
● Follow Step 1–2 on the previous page to
display the [Format] screen.
● Press the op buttons to select [Low
Level Format], then use the qr buttons to
display
.
● Press the opqr buttons to select [OK],
then press the m button.
X Low level formatting starts.
About Formatting
C
Y
P
O
• The supplied memory card has already been formatted.
• When the "Memory card error" message appears, or when the camera does not
work correctly, formatting the memory card may solve the problem. Copy the
images from the memory card to a computer or other device before formatting.
Formatting or erasing data on a memory card merely changes the file
management information on the card and does not ensure its contents
are completely deleted. Be careful when transferring or disposing of a
memory card. When disposing of a memory card, take precautions such
as physically destroying the card to prevent personal information leaks.
• The total capacity of the memory card displayed in the [Format] screen
may be less than indicated on the memory card.
• Low level formatting may take longer than standard formatting, since all
recorded data are erased.
• You can stop a low level format of a memory card by selecting [Stop].
When stopping low level formatting, the data will be erased but the
memory card can be used without problem.
50
(EC255) CDP-E065_Guide_E.book Page 51 Friday, July 4, 2008 10:35 AM
Changing Sounds
You can silence the sounds of the camera buttons or adjust the volume of
the camera sounds.
Mute Setting
Display the menu.
● Press the · button.
Select [Mute].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Mute],
then use the qr buttons to select [On].
Y
P
O
Adjusting the Volume
C
Display the menu.
● Press the · button.
Select [Volume].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Volume],
then press the m button.
51
(EC255) CDP-E065_Guide_E.book Page 52 Friday, July 4, 2008 10:35 AM
Changing the Image Display Time
Adjust the volume.
● Press the op buttons to select an item,
then use the qr buttons to adjust the
volume.
Y
P
O
Changing the Image Display Time
Images display for approximately 2 seconds after being shot. You can
change the length of time the images display.
C
Display the menu.
● Press the · button.
Select [Review].
● Press the qr buttons to select the 4 tab.
● Press the op buttons to select [Review],
then press the qr buttons to select the
display time.
● If you select [Off], the image will not
display.
● If you select [Hold], the image displays
until you press the shutter button halfway.
52
(EC255) CDP-E065_Guide_E.book Page 53 Friday, July 4, 2008 10:35 AM
3
Shooting Special Scenes
and Using Common
Functions
Y
P
O
This chapter explains the for beginners convenient Easy mode and
how to shoot various scenes with optimal settings. Other common
functions, such as the flash and the self-timer, are also explained.
C
• This chapter assumes the shooting mode is set to A. For other
shooting modes refer to the Functions Available in Each Shooting Mode
section (p. 134).
53
(EC255) CDP-E065_Guide_E.book Page 54 Friday, July 4, 2008 10:35 AM
9 Just Taking Pictures (Easy Mode)
Setting the mode dial to 9 (Easy mode) allows you to shoot just by pressing
the shutter button. The camera automatically sets the optimal settings so
that you can shoot worry-free in any shooting condition.
Select a shooting mode.
● Set the mode dial to 9.
Shoot.
• Taking worry-free pictures of people
When taking pictures of people, the camera detects the faces and focuses
automatically, so that you can capture them just in the right moment.
• Shooting worry-free close-ups
Even when shooting close subjects, you do not need to worry about the focus.
• Viewing images
Pressing the 1 button allows you to view the images you took. A guidance
will display on the screen so that you can securely check your images.
Y
P
O
What you can do in the Easy mode
C
In the Easy mode you can use the following operations. Other buttons cannot
be used. Therefore, you do not need to worry about wrong operations.
Taking Pictures
(Shooting mode)
Viewing Images
(Playback mode)
Taking pictures
Switching to
Shooting mode
Zooming in and
out
Switching to
Playback mode
Viewing images
Setting the flash
to Auto or Off
Erasing images
54
Viewing images
in a slideshow
(EC255) CDP-E065_Guide_E.book Page 55 Friday, July 4, 2008 10:35 AM
Shooting Various Scenes
The camera will make the optimal settings for the scene you wish to shoot
when you set the mode dial to a matching mode.
Select a shooting mode.
● Set the mode dial to the scene you wish to
shoot.
Shoot.
(Portrait)
Take portraits
● Produces a soft effect when
Y
P
O
photographing people.
(Landscape)
Take landscapes
C
● For shooting expansive landscapes.
(Night Snapshot)
Take snapshots at night
● Lets you take beautifully lit snapshots of
people against beautiful city nightscapes
or night backgrounds.
● If you hold the camera firmly, you can take
pictures with reduced camera shake, even
without a tripod.
(Kids&Pets)
Take shots of kids and pets
● Lets you capture subjects that move
around, such as children and pets, without
missing photo opportunities.
55
(EC255) CDP-E065_Guide_E.book Page 56 Friday, July 4, 2008 10:35 AM
K Shooting Special Scenes
(Indoor)
Take indoor shots
● Lets you shoot indoors with natural colors.
In F, C or H, images may appear rough because the ISO speed (p. 72)
was increased to match the shooting conditions.
K Shooting Special Scenes
Y
P
O
The camera will make the optimal settings for the special scene you wish to
shoot when you select a matching mode.
Select a shooting mode.
● Set the mode dial to K, then press the
C
m button.
● Press the op buttons to select
, then
use the qr buttons to select a shooting
mode.
● Press the m button.
Shoot.
56
(EC255) CDP-E065_Guide_E.book Page 57 Friday, July 4, 2008 10:35 AM
K Shooting Special Scenes
(Night Scene)
Take night scenes
● Lets you take beautifully lit city
nightscapes or night backgrounds.
(Sunset)
Shooting Sunsets
● Lets you shoot sunsets in vivid colors.
Y
P
O
(Foliage)
Take shots of foliage
● Lets you shoot trees and leaves such as
C
new growth, autumn leaves or blossoms
in vivid colors.
(Snow)
Take shots of people and snow
● Lets you take shots of properly lit people
against snowy backgrounds with natural
colors.
(Beach)
Take shots of people at the beach
● Lets you take shots of properly lit people
at the beach where reflected sunlight is
strong.
57
(EC255) CDP-E065_Guide_E.book Page 58 Friday, July 4, 2008 10:35 AM
K Shooting Special Scenes
(Fireworks)
Take shots of fireworks
● Lets you take shots of fireworks in vivid
colors.
(Aquarium)
Take shots of aquatic life in an
aquarium
● Lets you shoot aquatic life in indoor
aquariums with natural colors.
Y
P
O
(ISO3200)
Shooting with high ISO speed
● Lets you shoot with the ISO speed set to
3200. At high ISO speed the shutter
speed is faster and reduces subject blur
and camera shake during shooting.
● Recording pixels are set to
(1600 x
1200 pixels).
C
• In
, images may appear rough if the ISO speed (p. 72) was increased
depending on the scene.
• In
or
, attach the camera to a tripod so that the camera does not
move and blur the image. When you attach the camera to a tripod, you
are recommended to set [IS Mode] to [Off] to shoot (p. 124).
• In
, make sure the subject does not move until the shutter sound
plays, even after the flash fires.
• With
58
, image noise may be prominent.
(EC255) CDP-E065_Guide_E.book Page 59 Friday, July 4, 2008 10:35 AM
! Turning the Flash Off
You can turn the flash off for shooting in places where using a flash is
prohibited.
Press the r button.
Select !.
● Press the qr buttons to select !, then
press the m button.
X ! will appear on the screen.
● After taking the shot, repeat the above
Y
P
O
steps to select
C
.
What if the indicator blinks orange and a flashing
appears?
When you press the shutter button halfway in low light conditions where camera
shake is likely, the indicator will blink orange and a flashing
will appear on the
screen. Attach the camera to a tripod so that the camera does not move.
h Turning the Flash On
Select any shooting mode other than A, and the flash will fire every time
you shoot.
• Choose h as in Step 2 in the above section "Turning the Flash Off".
• The range of the flash for shooting is approximately 30 cm – 4.0 m (1.0 –
13 ft.) at maximum wide angle, and approximately 30 cm – 2.0 m (1.0 –
6.6 ft.) at maximum telephoto.
• After taking the shot, repeat the above steps to select
.
59
(EC255) CDP-E065_Guide_E.book Page 60 Friday, July 4, 2008 10:35 AM
Q Using the Self-Timer
Use the self-timer when you want to appear in the shot you are taking.
Press the p button.
Select a timer.
● Press the op buttons to select
for a
10 second delay, or
for a 2 second
delay, before the shot is taken.
● Press the m button.
X The timer you set displays on the screen.
C
Y
P
O
Shoot.
● Press the shutter button halfway to focus
on the subject, then press fully.
X The lamp blinks and the self-timer sound
plays.
X 2 seconds before the shutter releases, the
lamp and sound speed up.
● After the shot is taken, return to Step 2
and select
.
You can change the delay time and number of shots to take (p. 78).
60
(EC255) CDP-E065_Guide_E.book Page 61 Friday, July 4, 2008 10:35 AM
Zooming in on Far Away Subjects
The digital zoom can zoom up to 16x and capture subjects too far away for
the optical zoom (p. 22). The images may appear rough, however,
depending on the recording pixel setting (p. 70) and the zoom factor used.
Move the zoom lever toward i.
● Hold the zoom lever until zooming stops.
Release the zoom lever and then
move it toward i again.
X The camera will zoom in further on the
Y
P
O
subject.
Image Deterioration Zones with Digital Zoom
Recording Pixels
C
Optical Zoom
Digital Zoom
No image deterioration (zoom factor appears white)
Image deterioration (zoom factor appears blue)
Zoom factor at which zooming stops for a moment (safety zoom)
Turning Off the Digital Zoom
To turn off the digital zoom, press the · button, select the 4 tab, and then
select the [Digital Zoom] menu item and [Off] option.
The focal length when using digital zoom is 35 – 560 mm (35mm film
equivalent).
61
(EC255) CDP-E065_Guide_E.book Page 62 Friday, July 4, 2008 10:35 AM
Zooming in on Far Away Subjects
Digital Tele-Converter
The focal length of the lens can be increased by an equivalent of 1.4x and
2.3x. This enables a faster shutter speed and less chance of camera shake
than just using zoom (including digital zoom) at the same zoom factor.
The images may appear rough, however, depending on the combination of
recording pixel (p. 70) and digital tele-converter settings used.
Select [Digital Zoom].
● Press the · button.
● Select the 4 tab, then press the op
buttons to select [Digital Zoom].
Y
P
O
Accept the setting.
● Press the qr buttons to select [1.4x] or
[2.3x].
● Pressing the · button will return you to
the shooting screen.
X The view will be enlarged, and
and the
zoom factor will display on the screen.
● After taking the shot, select [Standard] in
[Digital Zoom].
C
Combinations that Cause Image Deterioration
• Using [1.4x] at a recording pixel setting of
or
will cause image
deterioration (the zoom factor will display in blue).
• Using [2.3x] at a recording pixel setting of
,
or
will cause image
deterioration (the zoom factor will display in blue).
• The respective focal lengths when using [1.4x] and [2.3x] are equivalent
to 49 – 196 mm and 80.5 – 322 mm (35mm film equivalent).
• The digital tele-converter cannot be used together with the digital zoom.
62
(EC255) CDP-E065_Guide_E.book Page 63 Friday, July 4, 2008 10:35 AM
Inserting the Date and Time
The date and time an image was shot can be recorded in the lower right
corner. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 18).
Select the recording pixels.
● Press the m button.
● Press the op buttons to select
Select
.
(p. 70).
● Press the qr buttons to select
.
● If you want to insert the date and time,
press the ⁄ button, use the qr buttons
to select [Date & Time], then press the m
button.
Y
P
O
Shoot.
C
● The gray areas on the top and bottom of
the screen will not be printed. Be sure
your subject is within the printable area
when you shoot.
Inserting and Printing the Date and Time in Images Not Shot in
• Use the DPOF print settings (p. 111) to print.
• Use the included software to print.
Refer to the Software Starter Guide for details.
• Connect the camera to a printer to print.
Refer to the Direct Print User Guide for details.
• Images shot in
are shot with a small number of recording pixels.
Therefore, printing on paper larger than postcard or L size will result in
rough photo prints (p. 71).
• The gray areas on the top and bottom of the screen will not be printed;
however, the entire image displayed will be recorded.
63
(EC255) CDP-E065_Guide_E.book Page 64 Friday, July 4, 2008 10:35 AM
e Shooting Close-ups (Macro)
You can shoot an object at a close distance or approach an object to shoot
the close-up of it. The focusing range from the end of the lens is 3 – 50 cm
(1.2 in. – 1.6 ft.).
Press the q button.
Select e.
● Press the qr buttons to select e, then
press the m button.
Y
P
O
X e will appear on the screen.
● After taking the shot, repeat Step 2 and
select
Using
C
.
When shooting with the camera attached to a tripod, set the self-timer to
avoid camera shake.
The edges of the image may darken if the flash fires.
64
to
(EC255) CDP-E065_Guide_E.book Page 65 Friday, July 4, 2008 10:35 AM
u Shooting Far Away Subjects
Select any shooting mode other than A, then use Infinity mode when the
subject is further than approximately 3 m away from the end of the lens.
● Select any shooting mode other than A
and follow Step 2 as described in
“Shooting Close-ups (Macro)” on the
previous page. Then select u.
● u displays on the screen.
● After taking the shot, repeat Step 2 of the
previous page and select
.
C
Y
P
O
65
(EC255) CDP-E065_Guide_E.book Page 66 Friday, July 4, 2008 10:35 AM
C
66
Y
P
O
(EC255) CDP-E065_Guide_E.book Page 67 Friday, July 4, 2008 10:35 AM
4
Making Settings for the
Images You Want
Y
P
O
This chapter explains how to use G (Program AE) mode and various
camera functions.
• This chapter assumes the shooting mode is set to G. For other shooting
modes refer to the Functions Available in Each Shooting Mode section
(p. 134).
C
67
(EC255) CDP-E065_Guide_E.book Page 68 Friday, July 4, 2008 10:35 AM
G Shooting in Program AE
The camera automatically sets basic functions, but unlike in A mode or
shooting various scenes, you can freely make your own settings.
* AE stands for Auto Exposure
Set the mode dial to G.
Make settings according to
purpose. (pp. 69 – 78)
Shoot.
What if shutter speed and aperture value are displayed in
red?
Y
P
O
If a correct exposure cannot be obtained when pressing the shutter button
halfway, shutter speed and aperture value are shown in red. Try the following
settings to obtain the correct exposure.
• Turn on the flash. (p. 59)
C
• Choose a higher ISO speed. (p. 72)
• Change the metering mode (p. 85)
68
(EC255) CDP-E065_Guide_E.book Page 69 Friday, July 4, 2008 10:35 AM
W Continuous Shooting
You can shoot continuously (about 1.3 shots/second).
Press the p button.
Select W.
● Press the op buttons to select W, then
press the m button.
Shoot.
Y
P
O
X As long as you hold the shutter button down,
the camera will shoot successive images.
Shooting until the memory card becomes full
If you use a low level formatted (p. 50) memory card, you can continuously shoot
until the memory card is full.
C
• As the number of images increases, the shooting intervals may take
longer.
• If the flash fires, shooting intervals may take longer.
69
(EC255) CDP-E065_Guide_E.book Page 70 Friday, July 4, 2008 10:35 AM
Changing the Recording Pixels (Image Size)
You can choose from 7 types.
Select the recording pixels.
● Press the m button, then use the op
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
• If you select
or
, you cannot use the Digital Zoom (p. 61) or
Digital Tele-Converter (p. 62).
Y
P
O
• The gray areas in
will not be printed; however, the entire image
displayed will be recorded.
Changing the Image Quality (Compression Ratio)
C
You can choose from 3 types of image quality, in order from high to low:
(Superfine),
(Fine),
(Normal).
Select the compression ratio.
● Press the m button, then use the op
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
70
(EC255) CDP-E065_Guide_E.book Page 71 Friday, July 4, 2008 10:35 AM
Changing the Image Quality (Compression Ratio)
Approximate Values for Recording Pixels and Compression Ratio
Recording Pixels
Image
Quality
Size
(Approx. KB)
(Large)
10 M/3648 x 2736
(Medium 1)
6 M/2816 x 2112
(Medium 2)
4 M/2272 x 1704
(Medium 3)
2 M/1600 x 1200
(Small)
0.3 M/640 x 480
(Date Stamp)
2 M/1600 x 1200
(Widescreen)
3648 x 2048
C
Recordable Images/Memory Card
32 MB
(supplied)
2 GB
8 GB
4332
6
448
1792
2565
11
749
2994
1226
23
1536
6140
2720
10
714
2855
1620
17
1181
4723
780
37
2363
9446
2002
14
960
3837
Y
P
O
1116
26
1707
6822
556
52
3235
12927
1002
29
1862
7442
558
52
3235
12927
278
99
6146
24562
249
111
6830
27291
150
171
10245
40937
84
270
15368
61406
558
52
3235
12927
3243
8
596
2384
1920
15
1007
4026
918
31
2048
8187
• The figures in this table are determined by Canon measuring conditions and may vary
depending on subject, memory card brand, camera settings or other factors.
Approximate Values for Paper Size
A3
A4, Letter size
●
Suitable for sending images as e-mail
attachments.
●
For printing on wide size paper.
2L size
Postcard size
L size
71
(EC255) CDP-E065_Guide_E.book Page 72 Friday, July 4, 2008 10:35 AM
Changing the ISO Speed
Press the o button.
Select a menu item.
● Press the op buttons to select a menu
item, then press the m button.
Y
P
O
Approximate Values for ISO Speed
Automatically sets the optimal speed for shooting mode and shooting
condition.
Automatically sets the optimal speed, not only for shooting mode and
shooting condition, but also for subject or camera motion. Depending
on the scene, the speed may be set higher than in ISO Auto, resulting in
less subject blur and camera shake.
C
Low Fine weather condition, outdoor shooting.
Cloudy,
Twilight
Night view
High Dark indoor
Setting the optimal ISO Speed
• Lowering the ISO speed results in crisper images.
• Raising the ISO speed results in a faster shutter speed and thus in reduced
camera shake. The flash reaches a greater distance to the subject. However,
images will be coarser.
• When the camera is set to
or
, you can press the shutter button
halfway to display the automatically set ISO speed.
• You can raise the ISO speed even higher with the ISO 3200 setting
(p. 58).
72
(EC255) CDP-E065_Guide_E.book Page 73 Friday, July 4, 2008 10:35 AM
Adjusting the Tone (White Balance)
The White Balance (WB) function adjusts the optimal white balance for
natural looking colors.
Select a white balance setting.
● Press the m button, then use the op
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
● After shooting, return the setting to
Auto
Daylight
Cloudy
Tungsten
.
Automatically sets the optimal white balance for the location.
Fine weather condition, outdoor shooting.
Cloudy, shady, twilight conditions.
Tungsten, bulb-type 3-wavelength fluorescent.
Warm-white, cool-white, warm-white-type (3-wavelength)
Fluorescent
fluorescent.
Y
P
O
Fluorescent H Daylight fluorescent, daylight-type (3-wavelength) fluorescent.
Custom
Manually sets the custom white balance.
C
This function cannot be used when My Colors is set to
or
.
Custom White Balance
You can adjust the white balance to the light source at the shooting location
and shoot with the appropriate color. Make sure that you set the white
balance under the light source of the shooting scene.
● Follow the Step 2 described above and
select
. Make sure the entire screen is
filled with the white subject, then press the
⁄ button.
X The tint on the screen will change when
the white balance data is set.
● After shooting, return the setting to
.
73
(EC255) CDP-E065_Guide_E.book Page 74 Friday, July 4, 2008 10:35 AM
Adjusting the Brightness
(Exposure Compensation)
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.
Select the exposure
compensation.
● Press the m button, then use the op
buttons to select
.
Adjust the Brightness.
● While watching the screen, press the qr
buttons to adjust the brightness, then
press the m button.
● After the picture has been taken, return
the setting to
(zero).
C
74
Y
P
O
(EC255) CDP-E065_Guide_E.book Page 75 Friday, July 4, 2008 10:35 AM
Changing the Tone of an Image (My Colors)
You can change the tone of an image such as sepia or black and white when
shooting.
Select a My Colors setting.
● Press the m button, then use the op
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
● After shooting, return the setting to
My Colors Off
Vivid
Neutral
Sepia
B/W
Custom Color
C
Custom Color
.
–
Emphasizes the contrast and color saturation for a vivid
impression.
Tones down the contrast and color saturation for neutral
hues.
Sepia tones.
Black and white.
You can adjust image contrast, sharpness and color
saturation in 5 gradations.
Y
P
O
● Follow the Step 2 described above and
select
, then press the ⁄ button.
● Press the op buttons to select an item,
then use the qr buttons to choose a
value, then press the m button.
● The more to the right, the value gets
stronger/deeper, the more to the left, the
value gets weaker/lighter.
75
(EC255) CDP-E065_Guide_E.book Page 76 Friday, July 4, 2008 10:35 AM
Changing the Composition to Shoot (Focus Lock)
While you press the shutter button halfway, focus and exposure are fixed.
You can now recompose and shoot. This is called focus lock.
Focus on a subject.
● Center a subject at the same focal
distance in the screen, and press the
shutter button halfway.
● Confirm that the AF Frame on the subject
is green.
Recompose.
● Hold the shutter button pressed halfway
Y
P
O
and recompose the scene.
Shoot.
● Press the shutter button fully.
C
76
(EC255) CDP-E065_Guide_E.book Page 77 Friday, July 4, 2008 10:35 AM
Shooting Using the Viewfinder
If you want to save battery power, you can use the viewfinder for shooting,
instead of the screen. Operations for shooting are the same as when using
the screen; however, the view in the viewfinder and the image taken may
differ.
Turn off the screen (p. 45).
● Press the ⁄ button to turn off the screen.
Compose the scene and shoot.
● Use the viewfinder to compose the scene
and shoot.
Shooting Using a TV
Y
P
O
You can use a TV to display the camera screen.
• Connect the camera to a TV as described in "Viewing Images on a TV"
(p. 100), and set the shooting mode to shoot.
• Operations for shooting are the same as when using the camera’s screen.
C
77
(EC255) CDP-E065_Guide_E.book Page 78 Friday, July 4, 2008 10:35 AM
$ Customizing the Self-Timer
You can set the time delay (0 – 30 seconds) and the number of shots (1 – 10
shots).
Press the p button.
Select
.
● Press the op buttons to select
, then
quickly press the · button.
Y
P
O
Make settings.
● Press the op buttons to select an item,
C
then use the qr buttons to choose a
value, then press the m button.
What if the number of shots is set to more than 2 shots?
• Exposure and white balance settings are fixed to the first shot.
• When you set the time delay to more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases.
• If the flash fires, the shooting interval may take longer.
• If you set a high number of shots, the shooting interval may take longer.
• If the memory card becomes full, shooting stops automatically.
78
(EC255) CDP-E065_Guide_E.book Page 79 Friday, July 4, 2008 10:35 AM
5
Getting More Out
of Your Camera
Y
P
O
This chapter serves as the advanced version of Chapter 4 and
explains how to take pictures using various functions.
• This chapter assumes the shooting mode is set to G. For other shooting
modes refer to the Functions Available in Each Shooting Mode section
(p. 134).
C
79
(EC255) CDP-E065_Guide_E.book Page 80 Friday, July 4, 2008 10:35 AM
Changing the AF Frame
You can change the AF (Auto Focus) mode to take the shots you want.
Select [AF Frame].
● Press the · button and select the 4
tab.
● Press the op buttons to select
[AF Frame].
Make the setting.
● Press the qr buttons to select a setting.
Face Detect
Y
P
O
• Recognizes people's faces and focuses, adjusts exposure (evaluative
metering only) and white balance (
only) for shooting.
• When the camera is pointed at subjects, a white frame appears on the
face the camera judges to be the main subject, and gray frames (max. 2)
will appear on other faces. When the shutter button is pressed halfway, up
to 9 green frames will appear on faces the camera focuses on.
C
• If a face is not detected and only gray frames (no white frame) appear,
the setting will change to [AiAF].
• Examples of faces that cannot be detected:
• Subjects that are far away or extremely close.
• Subjects that are dark or light.
• Faces turned to the side or at a diagonal, or faces with a portion hidden.
• The camera may mistakenly identify non-human subjects as a face.
• Not available when the screen is turned off (p. 45).
• If the camera cannot focus when you press the shutter button halfway,
the AF frame will not appear.
80
(EC255) CDP-E065_Guide_E.book Page 81 Friday, July 4, 2008 10:35 AM
Changing the AF Frame
AiAF
The camera automatically selects among 9 AF frames to focus with.
If the camera cannot focus when you press the shutter button halfway, the
AF frame will not appear.
Center
The AF frame will be fixed to the center. This is effective for focusing on a
specific point.
You can reduce the AF frame size
Press the · button, select the 4 tab, then select the [AF Frame Size] menu
item and the [Small] option.
Y
P
O
• The setting is configured to [Normal] when the digital zoom or digital teleconverter is used.
If the camera cannot focus when you press the shutter button halfway, the
AF frame will turn yellow.
C
81
(EC255) CDP-E065_Guide_E.book Page 82 Friday, July 4, 2008 10:35 AM
Checking the Focus and People's
Expressions (AF-Point Zoom)
You can zoom the display of the AF frame to check focus when shooting.
When you want to capture people’s expressions, set [AF Frame] (p. 80) to
[Face Detect]. When you want to check the focus while shooting in Macro
mode, set [AF Frame] to [Center].
Select [AF-Point Zoom].
● Press the · button and select the 4
tab.
● Press the op buttons to select [AF-Point
Zoom].
Accept the setting.
Y
P
O
● Press the qr buttons to select [On], then
press the · button.
Check the focus.
● Press the shutter button halfway to check
C
the focus.
● If the AF frame is set to [Face Detect], the
face that the camera determined as the
main subject is displayed enlarged. If the
AF frame is set to [Center], the center of
the image is displayed enlarged.
Shoot.
● Press the shutter button fully.
In the following cases the focus point will not display magnified:
• AF frame is set to [AiAF].
• When [Face Detect] is selected, but no face is detected, or when the
face is too large relative to the entire screen.
• When the subject is out of focus.
• When using the digital zoom.
• When the screen is turned off (p. 45).
• When the image is being displayed on a TV screen.
82
(EC255) CDP-E065_Guide_E.book Page 83 Friday, July 4, 2008 10:35 AM
0 Selecting the Face to Focus On
(Face Select and Track)
You can select a chosen face to focus on and then shoot.
Face Frame
Set the Face Select mode.
● Point the camera towards the face and
press the 0 button.
X The Face Select mode will activate and a
white face frame ( ) will display around
the face the camera will focus on. Even if
the subject moves, the frame will follow
the subject within a certain range.
Select a face you wish to focus on.
Y
P
O
● Press the 0 button, and a face frame will
C
move to the face you wish to focus on. If
the frame has moved to all detected faces,
the Face Select mode will be canceled.
● Holding down the 0 button will display
face frames (up to 35) of all the detected
faces (green: the face the camera will
focus on, white: detected faces).
Shoot.
● Press the shutter button halfway. The face
frame of the focused face will change into
and appears in green.
● Press the shutter button all the way to shoot.
In the following cases, the Face Select mode will be canceled.
• When turning the power off and back on or changing the shooting mode.
• When displaying the Menu screen.
• When using the digital zoom or digital tele-converter.
• When changing the recording pixels to
.
• When the screen is turned off (p. 45).
• When the camera cannot detect any face.
83
(EC255) CDP-E065_Guide_E.book Page 84 Friday, July 4, 2008 10:35 AM
Checking the Focus Immediately after
Shooting (Focus Check)
You can check if your subject was in focus, right after shooting. You are
recommended to set [Review] in the 4 tab to [Hold] beforehand.
Select [Review Info].
● Press the · button and select the 4
tab.
● Press the op buttons to select [Review
Info].
Accept the setting.
● Press the qr buttons to select [Focus
Y
P
O
Check], then press the · button.
Recorded Image
Shoot.
X The recorded image displays with the AF
C
frame or face frame (white frame around
the face), where the subject was focused.
At the bottom right displays the content of
the orange frame.
Checking the focus.
Orange frame contents
● If multiple white frames display, press the
m or 0 button to switch the display on
the bottom right of the screen for checking
the focus of each frame.
● You can enlarge the display of the orange
frame content by moving the zoom lever
towards k.
● Pressing the shutter button halfway will
return you to the shooting screen.
You can erase an image while checking the focus (when the screen
described in Step 3 displays) by pressing the a button.
84
(EC255) CDP-E065_Guide_E.book Page 85 Friday, July 4, 2008 10:35 AM
Changing the Metering Mode
You can change the brightness metering mode to match the shot you want to take.
Select the metering mode.
● Press the m button, then use the op
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
Evaluative
Center Weighted
Avg.
Spot
%
Suitable for standard shooting conditions, including back lit
shots. Automatically adjusts the exposure so that the
subject is always properly lit for the shooting conditions.
Averages the light metered from the entire frame, but gives
greater weight to the center.
Only meters within the
(Spot AE Point frame) that
appears at the center of the screen.
Y
P
O
Shooting with AF Lock
C
You can lock focusing. Once the focus is locked, it remains locked even if
you let go of the shutter button.
Focus.
● Point the camera so that the subject of the
same shooting distance as the subject
you want to take a picture of, is in the AF
frame
Lock the focus.
● Keep the shutter button pressed halfway
and press the q button
X The focus is locked and
.
displays on
the screen.
Compose the scene and shoot.
● After shooting, press q to cancel AF lock.
85
(EC255) CDP-E065_Guide_E.book Page 86 Friday, July 4, 2008 10:35 AM
&
Shooting with AE Lock
You can lock the exposure setting and shoot. The focus and exposure can
be set separately.
Lock the Exposure.
● Point the camera at the subject on which
you wish to lock the exposure. While
pressing the shutter button halfway
,
press the o button
.
X
displays and the exposure is locked.
Compose the scene and shoot.
● After shooting, press the o button to
Y
P
O
cancel AE lock.
C
86
(EC255) CDP-E065_Guide_E.book Page 87 Friday, July 4, 2008 10:35 AM
(
Shooting with FE Lock
Just like with AE lock (p. 85), you can lock the exposure for shooting with the
flash.
Select
(p. 59).
Lock the Flash Exposure.
● Point the camera at the subject on which
you wish to lock the exposure. While
pressing the shutter button halfway
,
press the o button
.
X The flash fires and
displays. The flash
output is retained.
Y
P
O
Compose the scene and shoot.
● After shooting, press the o button to
cancel FE lock.
C
87
(EC255) CDP-E065_Guide_E.book Page 88 Friday, July 4, 2008 10:35 AM
Slowing Down the Shutter Speed
(Long Shutter Mode)
You can set the shutter speed to a slow setting to make dark subjects
appear brighter. In order to avoid camera shake, attach the camera to a
tripod.
Select the Long Shutter mode.
● Press the m button, then use the op
buttons to select
. Press the ⁄ button.
Y
P
O
Change the shutter speed.
● Use the qr buttons to change the shutter
speed, then press the m button.
● The higher the value, the slower the
C
shutter speed and the brighter the
recorded image becomes.
When you attach the camera to a tripod, you are recommended to set [IS
Mode] to [Off] to shoot (p. 124)
88
(EC255) CDP-E065_Guide_E.book Page 89 Friday, July 4, 2008 10:35 AM
6
Using Various Functions for
Movies
Y
P
O
This chapter explains how to shoot and view movies, using various
functions.
• Set the mode dial to E before operating the camera.
C
89
(EC255) CDP-E065_Guide_E.book Page 90 Friday, July 4, 2008 10:35 AM
Changing the Movie Mode
Select a shooting mode.
● Press the m button, then use the op
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
Standard
Compact
This is the Standard mode. You can use the digital zoom
during shooting (p. 61).
Shooting with reduced recording pixels. You cannot use the
zoom during shooting.
Y
P
O
Changing the Image Quality in X
Select the image quality.
● Press the m button, then use the op
C
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
X The settings you made will be displayed
on the screen.
Modes and Image Quality Table
Mode
Recording Pixels/Frame Rate
640 x 480 pixels,
30 frames/sec.
640 x 480 pixels,
30 frames/sec. LP
320 x 240 pixels,
30 frames/sec.
160 x 120 pixels,
15 frames/sec.
90
Content
For shooting standard quality movies.
The image quality will be lower than with
, but you can record twice the length.
Since the number of the recording pixels is
smaller, the image quality will be lower than with
, but you can record three times the length.
Suitable for attaching to e-mails, due to the
small file size.
(EC255) CDP-E065_Guide_E.book Page 91 Friday, July 4, 2008 10:35 AM
Shooting Movies With Fixed Exposure Settings
Estimated Shooting Time
Mode
Image
Quality
(Frame Rate) 32 MB (supplied)
Shooting Time
2 GB
8 GB
15 sec.
16 min. 47 sec.
1 hr. 7 min. 6 sec.
30 sec.
33 min. 2 sec.
2 hrs. 12 min. 3 sec.
43 sec.
46 min. 33 sec.
3 hrs. 6 min. 4 sec.
3 min. 30 sec.
3 hrs.
24 min. 54 sec.
13 hrs.
38 min. 45 sec.
• The figures in this table depend on Canon measuring conditions.
• Max. clip length for
is approx. 1 hour.
Recording also stops when the file size reaches 4 GB.
Y
P
O
• Depending on the memory card, recording may stop even if the max. clip length
has not been reached. Use of SD Speed Class 4 or higher memory cards is
recommended.
• Max. clip length for
is approx. 3 minutes. The figures above indicate the
max. continuous recording time.
C
Shooting Movies With Fixed Exposure Settings
Before shooting, you can lock (AE Lock) or change the exposure (Exposure
Shift).
Lock the exposure.
● Pressing the o button will lock the
exposure, and the exposure shift bar will
appear.
Adjust the exposure.
Exposure Shift Bar
● Adjust the exposure with the qr buttons.
● After shooting, press the o button to
cancel.
91
(EC255) CDP-E065_Guide_E.book Page 92 Friday, July 4, 2008 10:35 AM
Other Shooting Functions
The following functions can be used in the same way as for still images.
•
Using the Self-Timer (p. 60)
• Zooming in on Far Away Subjects (p. 61)
In
, you can use the digital zoom, but the optical zoom cannot be used.
If you want to shoot at the maximum magnification, you should adjust the optical
zoom to the maximal factor before shooting.
•
Shooting Close-ups (Macro) (p. 64)
•
Shooting Far Away Subjects (p. 65)
• Adjusting the Tone (White Balance) (p. 73)
• Changing the Tone of an Image (My Colors) (p. 75)
• Shooting Using a TV (p. 77)
•
Shooting with AF Lock (p. 85)
Y
P
O
Playback Functions
The following functions can be used in the same way as for still images.
• Erasing Images (p. 25)
• Quickly Finding Images (p. 94)
C
•
Organizing Images by Category (My Category) (p. 96)
•
Viewing Slideshows (p. 98)
• Viewing Images on a TV (p. 100)
•
Erasing All Images (p. 101)
•
Protecting Images (p. 102)
Summary for Viewing Movies (p. 30)
Exit playback and return to single image playback.
Print (Refer to the Direct Print User Guide)
Playback
Slow Motion Playback (you can use the q button to slow down, or the r button
to speed up playback. Sound will not play back.)
Display the first frame
Previous frame (Rewind if you hold down the m button.)
Next frame (Fast forward if you hold down the m button.)
Display the last frame
92
(EC255) CDP-E065_Guide_E.book Page 93 Friday, July 4, 2008 10:35 AM
7
Using Various Playback and
Other Functions
This chapter explains how to play back and edit images.
Y
P
O
It also explains how to transfer images to a computer and how to
make settings for printing.
• Press the 1 button to set the Playback mode, before operating the
camera.
C
Images edited on a computer, changed file names, or taken with a
different camera may not display correctly.
93
(EC255) CDP-E065_Guide_E.book Page 94 Friday, July 4, 2008 10:35 AM
Quickly Finding Images
g Displaying 9 Images (Index Playback)
Displaying 9 images at a time lets you quickly find the image you want.
Select Index Playback.
● Move the zoom lever toward g.
X Images will display in an index. The
selected image will have a green frame
and be enlarged.
Select an image.
● Press the opqr buttons to move the
Y
P
O
green frame.
Display only the selected image.
● Move the zoom lever toward k.
X The image in the green frame will display
C
in Single Image Playback.
Searching 9 Images at a Time
Select Index Playback.
● Move the zoom lever toward g.
Display the Jump bar.
● Move the zoom lever toward g.
X The jump bar appears.
Jump Bar
Change the displayed images.
● Press the qr buttons to switch between
displays of 9 images.
● To return to Index Playback, move the
zoom lever toward k.
Holding the m button and pressing the qr buttons will jump to the first or
last set of images.
94
(EC255) CDP-E065_Guide_E.book Page 95 Friday, July 4, 2008 10:35 AM
Quickly Finding Images
d Jumping to Images (Jump Display)
When you have many images on a memory card, you can jump to images
using a search key.
Select a search key.
● In Single Image Playback, press the o
button.
X The search key and the position of the
currently displayed image will appear at
the bottom of the screen.
● Press the op buttons to select the
desired search key.
Y
P
O
Jump to an image.
● Press the qr buttons.
X The camera will use the selected search
Position of the Currently
Displayed Image
C
Jump Shot Date
People
Scenery
Events
–
key to jump to an image.
● To return to Single Image Playback, press
the · button.
Jumps to the first image of each shooting date.
Jumps to the images of each category, sorted
with My Category (p. 96).
Category 1–3
To Do
Jump to Folder
Jumps to the first image of each folder.
Jump to Movie
Jumps to a movie.
Jump 10 Images
Jumps over 10 images at a time.
Jump 100 Images
Jumps over 100 images at a time.
• With search keys other than
and
, the number of images
matching the search key will display on the right side of the screen.
• The desired search key may not display at the bottom of the screen, if
there are no images that match that search key.
95
(EC255) CDP-E065_Guide_E.book Page 96 Friday, July 4, 2008 10:35 AM
; Organizing Images by Category
(My Category)
You can sort images into pre-set categories and organize by category.
People
Category 1–3
Scenery
To Do
Events
Select [My Category].
● Press the · button, select the 1 tab.
Press the op buttons to select [My
Category], then press the m button.
Y
P
O
Categorize the images.
● Press the qr buttons to select an image.
Press the op buttons to select a
category, then press the m button.
● Pressing the m button again cancels the
setting.
C
Auto Category during Shooting
Images are automatically sorted when shot, as shown in the following table.
People
For images shot in
,
or
mode, or images with faces
detected when [AF Frame] (p. 80) is set to [Face Detect].
Scenery
For images shot in
,
,
Events
For images shot in
,
,
or
,
mode.
or
mode.
• If you do not wish to categorize the images automatically, select the 4
tab, choose [Auto Category] and set it to [Off].
96
(EC255) CDP-E065_Guide_E.book Page 97 Friday, July 4, 2008 10:35 AM
k Magnifying Images
Magnify an image.
● In Single Image Playback, move the zoom
Approximate Location
of Displayed Area
C
lever toward k and hold it there.
will display, and the image will be
magnified up to approx. 10 times.
● If you press the opqr buttons, you can
move the location of the displayed area.
● Move the zoom lever toward g to reduce
the magnification or return to Single
Image Playback.
● If you press the m button,
will
display. Press the qr buttons to switch
between images at the same level of
magnification. Press the m button again
to return to normal.
Y
P
O
97
(EC255) CDP-E065_Guide_E.book Page 98 Friday, July 4, 2008 10:35 AM
. Viewing Slideshows
You can automatically playback images recorded to a memory card. Each
image displays for approximately 3 seconds.
Select [Slide Show].
● Press the · button, select the 1 tab.
Press the op buttons to select [Slide
Show], then press the m button.
Select a transition effect.
● Press the qr buttons to select a transition
Y
P
O
effect, then press the m button.
X A few seconds after “Loading image…”
displays, the slideshow will start.
● You can pause/restart a slideshow by
pressing the m button again.
● Press the · button to stop the
C
slideshow.
Images display without transition effect.
The next image displays gradually.
The image slides out to the left and the next image appears.
• If you press the qr buttons during a slideshow, the image will change
(if you hold the buttons pressed, the images move faster).
• Power saving function does not work during slideshows (p. 42).
98
(EC255) CDP-E065_Guide_E.book Page 99 Friday, July 4, 2008 10:35 AM
Checking the Focus and People's
Expressions (Focus Check Display)
You can check the focus or people's expressions of an image taken.
Recorded Image
Display the Focus Check screen.
● Press the ⁄ button several times until
the focus check screen appears.
X The recorded image displays with the AF
Orange frame contents
frame (frame with the subject in focus),
the face frame (white frame around a
face) or gray frames (around faces
detected during playback).
X The orange frame shows the range of the
image displayed at the bottom right of the
screen.
Y
P
O
Checking the focus.
C
● Move the zoom lever toward k.
X The content of the orange frame displays
magnified at the bottom right of the
screen.
● Use the zoom lever to change the display
size, and the opqr buttons to change
the display position, while checking the
focus.
● Press the · button to close the
magnified display.
When multiple frames display
When multiple frames display, press the m or 0 button to switch frames.
Each time you press either button changes the position of the orange frame.
99
(EC255) CDP-E065_Guide_E.book Page 100 Friday, July 4, 2008 10:35 AM
Viewing Images on a TV
Using the supplied AV cable, you can connect the camera to a TV to view
images you have shot.
Items to Prepare
• Camera and TV
• AV cable supplied with the camera (p. 2)
Turn off the camera and TV.
Connect the camera to the TV.
● Open the camera’s cover and insert the
Yellow
Red or black
plug of the supplied AV cable into the
camera’s A/V OUT terminal.
● Insert the other end plugs into TV’s video
input terminals as shown in the illustration.
Y
P
O
Turn on the TV and switch it to
video mode.
Yellow
C
Black
Turn on the camera.
● Press the 1 button to turn on the camera.
X The image will appear on the TV (nothing
will appear on the screen of the camera).
● After you finish viewing, turn off the
camera and TV, and unplug the AV cable.
What if no image displays on the TV?
If the camera’s video output system (NTSC/PAL) does not match the TV’s,
images will not display correctly. If this happens, press the · button, select the
3 tab, and then use the [Video System] menu item to switch to the correct video
system.
100
(EC255) CDP-E065_Guide_E.book Page 101 Friday, July 4, 2008 10:35 AM
+ Changing Image Transitions
You can select from three transition effects when switching between images
in Single Image Playback.
Select [Transition].
● Press the · button, select the 1 tab,
and then select [Transition] and use the
qr buttons to select the desired
transition.
Immediately switches between images without transition effect.
Displayed image fades out as next image fades in.
Y
P
O
Slides images left to switch between images.
/ Erasing All Images
In addition to selecting and erasing images one at a time, you can erase all
images at once. Since erased images cannot be recovered, exercise
adequate caution before erasing images. However, protected images cannot
be erased.
C
Select [Erase all].
● Press the · button, select the 1 tab.
Press the op buttons to select [Erase
All], then press the m button.
Erase all images.
● Press the qr buttons to select [OK], then
press the m button.
X All images on the memory card will be
erased.
101
(EC255) CDP-E065_Guide_E.book Page 102 Friday, July 4, 2008 10:35 AM
:
Protecting Images
You can protect important images so that they will not be erased
inadvertently.
Select [Protect].
● Press the · button, select the 1 tab.
Press the op buttons to select [Protect],
then press the m button.
Protect the image.
● Press the qr buttons to select an image,
Y
P
O
then press the m button.
X Protected images display
on the
screen.
● Press the m button again to cancel
protection, and the
will disappear.
● To protect additional images, repeat the
above procedure.
C
If you format the memory card (p. 49), protected images will also be
erased.
• Protected images cannot be erased with the camera’s erase function. To
erase an image, cancel protection first.
• If you select [Erase all] (p. 101) after protecting necessary images, all
other images will be erased. This is a convenient way of erasing
unneeded images.
102
(EC255) CDP-E065_Guide_E.book Page 103 Friday, July 4, 2008 10:35 AM
=
Resizing Images
You can resave images that were recorded at high recording pixel settings
as a new lower pixel file.
Select [Resize].
● Press the · button, select the 1 tab.
Press the op buttons to select [Resize],
then press the m button.
Select an image.
● Press the qr buttons to select an image,
Y
P
O
then press the m button.
Select an image size.
● Press the qr buttons to select a setting,
C
then press the m button.
Save the new image.
● Press the qr buttons to select [OK], then
press the m button.
X The image will be saved as a new file.
Display the new image.
● When you press the · button, [Display
new image?] displays. Press the qr
buttons to select [Yes], then press the m
button.
X The saved image will display.
103
(EC255) CDP-E065_Guide_E.book Page 104 Friday, July 4, 2008 10:35 AM
\ Rotating Images
• You cannot resize an image if there is not enough free space on the
memory card.
• Movies and images shot in
cannot be resized.
You cannot resize an image to a larger size.
\ Rotating Images
Images taken with the camera held vertically can be rotated when viewing
them horizontally.
Y
P
O
Select [Rotate].
● Press the · button, select the 1 tab.
C
Press the op buttons to select [Rotate],
then press the m button.
Rotate the image.
● Press the qr buttons to select an image,
then press the m button.
X Cycle through the 90°/270°/original
orientations with each press of the m
button.
104
(EC255) CDP-E065_Guide_E.book Page 105 Friday, July 4, 2008 10:35 AM
] Correcting Red-Eye Effect
You can automatically correct images with red-eye and save those images
as new files.
Select [Red-Eye Correction].
● Press the · button, select the 1 tab.
Press the op buttons to select [Red-Eye
Correction], then press the m button.
Select an image to correct.
● Press the qr buttons to select an image,
Y
P
O
then press the m button.
X A frame will appear on red-eye detected
by the camera.
C
Correct the image.
● Press the qr buttons to select [Start],
then press the m button.
Save the new image.
● Press the qr buttons to select [New File],
then press the m button.
X The image will be saved as a new file.
Display the new image.
● When you press the · button, [Display
new image?] displays. Press the qr
buttons to select [Yes], then press the m
button.
X The saved image will display.
105
(EC255) CDP-E065_Guide_E.book Page 106 Friday, July 4, 2008 10:35 AM
] Correcting Red-Eye Effect
Manual Correction
When the camera cannot automatically detect and correct red-eye, correct it manually.
Add a correction frame.
● In Step 3 on the previous page, select
[Add Frame] and then press the m
button.
Set the position and size.
● Press the opqr buttons to move the
Y
P
O
correction frame (green) to the red-eyes,
then use the zoom lever to adjust its size
so only the red-eyes are framed.
X The area inside the frame will appear
enlarged in the bottom right of the screen.
● When you press the m button, the first frame
will be set (white) and a new frame will appear.
● When you have set the frame positions and
sizes, press the · button, then follow
Steps 3 and 4 on the previous page.
● You can add up to 35 correction frames.
C
Removing Frames
• In Step 3 on the previous page, select [Remove Frame] and then press
the m button.
• Press the qr buttons to select a frame, then press the m button.
• Press the · button, then follow Steps 3 and 4 on the previous page.
• Some images may not be properly corrected.
• If there is not enough free space on the memory card, red-eye cannot be
corrected.
• If you repeat corrections on the same image, image quality may deteriorate.
• When [Overwrite] in Step 4 on the previous page is selected, the
uncorrected image is overwritten with the corrected data, erasing the
original image.
• Protected images cannot be overwritten.
106
(EC255) CDP-E065_Guide_E.book Page 107 Friday, July 4, 2008 10:35 AM
^ Attaching Sound Memos
You can record and attach a sound memo (WAVE format) to an image. The
attached sound memo can be up to approximately 1 minute long per image.
Select [Sound Memo].
● Press the · button, select the 1 tab.
Press the op buttons to select [Sound
Memo], then press the m button.
Select an image.
● Press the qr buttons to select an image,
Y
P
O
then press the m button.
C
Record the memo.
● Press the qr buttons to select
, then
press the m button.
X Recording starts.
● You can pause/restart recording by
pressing the m button.
● If you want to stop recording, press the
qr buttons to select
, then press the
m button.
Sound Memo Operation Panel
Exit
Record
Pause
Play
Delete
• The sound attached to an image can also be played with the supplied
software.
• Sound memos cannot be deleted from protected images.
107
(EC255) CDP-E065_Guide_E.book Page 108 Friday, July 4, 2008 10:35 AM
Transferring Images to a Computer
“Transferring Images with the Camera” (p. 35) in Chapter 1 explained how to
transfer images using [New Images]. This section will explain other ways to
transfer images.
Prepare.
● Follow Steps 2–4 on page 33 to display
Direct Transfer menu.
Select a setting.
● Press the op buttons to select a setting.
Transfer the images.
Y
P
O
In
and
● Press the c button.
X The camera returns to the Direct Transfer
menu once transferring is complete.
In
and
● Press the c button, then use the qr
C
buttons to select an image and press the
c button again.
X Images matching the selected setting will
be transferred.
● Press the · button to return to the Direct
Transfer menu.
Direct Transfer Settings
All Images
Transfers all images from the memory card to the computer.
New Images
Transfers all new images that have not been transferred to
the computer before (p. 35).
DPOF Trans. Images Transfers all images designated for transfer at once (p. 109).
Select & Transfer
Select and transfer images one at a time.
Wallpaper
Select and transfer an image to use as your computer
desktop’s background (wallpaper). (JPEG only)
To cancel while transferring, press the m button.
108
(EC255) CDP-E065_Guide_E.book Page 109 Friday, July 4, 2008 10:35 AM
{ Designating Images for Transfer
(DPOF)
You can designate images you want to transfer with [DPOF Trans. Images]
(p. 108). These designation methods comply with the DPOF (Digital Print
Order Format) standards.
Designating Images Individually
Select [Transfer Order].
● Press the · button, select the 1 tab.
Press the op buttons to select [Transfer
Order], then press the m button.
Y
P
O
Select [Order].
● Press the qr buttons to select [Order],
then press the m button.
C
Select an image.
● Press the qr buttons to select an image,
then press the m button.
X After designating an image
displays.
● Press the m button again to cancel
designation, the
will disappear.
● Repeat the above procedure to designate
other images. Up to 998 images can be
designated.
● Pressing the · button twice will save the
settings to the memory card and return
you to the menu screen.
109
(EC255) CDP-E065_Guide_E.book Page 110 Friday, July 4, 2008 10:35 AM
{ Designating Images for Transfer (DPOF)
Designating All Images
Select [Transfer Order].
● Press the · button, select the 1 tab.
Press the op buttons to select [Transfer
Order], then press the m button.
Select [Mark all].
● Press the qr buttons to select [Mark all],
then press the m button.
● Press the qr buttons to select [OK], then
Y
P
O
press the m button.
X All images will be designated together.
Reset All
C
Select [Transfer Order].
● Press the · button, select the 1 tab.
Press the op buttons to select [Transfer
Order], then press the m button.
Select [Reset].
● Press the qr buttons to select [Reset],
then press the m button.
● Press the qr buttons to select [OK], then
press the m button.
X All transfer orders are removed.
may display when using a memory card with transfer settings set by a
different camera. If you change settings with this camera, the previously
made settings may be overwritten.
110
(EC255) CDP-E065_Guide_E.book Page 111 Friday, July 4, 2008 10:35 AM
Designating Images for Printing (DPOF)
You can make print settings to images on a memory card (up to 998
images), such as which images to print and how many prints to make. These
designation methods comply with the DPOF (Digital Print Order Format)
standards.
Using the c Button to Add to Print List
Display the image you wish to print and simply press the c button to add
it to the Print List (DPOF).
Select an image.
● Press the qr buttons to select an image,
then press the c button.
Y
P
O
Set the number of prints.
● Press the op buttons to set the number
of prints.
Add to Print List
C
● Press the qr buttons to select [Add], then
press the m button.
icon and the number of prints
display.
● If you want to remove an image from the
Print List, display the image you wish to
remove. Press the c button, use the
qr buttons to select [Remove], then
press the m button.
X The
111
(EC255) CDP-E065_Guide_E.book Page 112 Friday, July 4, 2008 10:35 AM
Designating Images for Printing (DPOF)
Printing from the Print List (DPOF)
You can easily print the selected images, after setting the Print List (DPOF)
and connecting the camera with a printer. Also refer to the Direct Print User
Guide.
Turn off the camera and printer.
Connect the camera and printer.
● Open the cover and insert the smaller plug
of the cable into the camera's terminal, as
shown.
● Insert the bigger plug into the printer's
terminal. Refer to the printer's user guide
about how to connect the printer.
Y
P
O
Turn on the printer.
Turn on the camera.
C
Printing.
● Press the op buttons to select
[Print now], then press the m button.
X Printing starts.
● Press the qr buttons to check the images
in the Print List.
112
(EC255) CDP-E065_Guide_E.book Page 113 Friday, July 4, 2008 10:35 AM
Designating Images for Printing (DPOF)
Selecting Images
Select [Select Images & Qty.].
● Press the · button, select the 2 tab.
Press the op buttons to select [Select
Images & Qty.], then press the m button.
Select an image.
● Press the qr buttons to select an image,
then press the m button.
Y
P
O
X You will be able to set the number of print
copies.
● If you select [Index],
appears on the
screen.
Set the number of prints.
C
● Press the op buttons to set the number
of prints (maximum 99).
● Repeat Steps 2 and 3 to set other images
and the number of prints.
● For [Index], you cannot set the number of
prints. Only select images.
Set All Images to Print One Each
Select [Select All Images].
● Press the · button, select the 2 tab.
Press the op buttons to select [Select
All Images], then press the m button.
113
(EC255) CDP-E065_Guide_E.book Page 114 Friday, July 4, 2008 10:35 AM
Designating Images for Printing (DPOF)
Make the settings.
● Press the qr buttons to select [OK], then
press the m button.
X One copy of every image will be set to
print and you will return to the menu
screen.
Clearing all Selections
Select [Clear All Selections].
● Press the · button, select the 2 tab.
Press the op buttons to select [Clear All
Selections], then press the m button.
● Press the qr buttons to select [OK], then
press the m button.
X All selections will be cleared.
Print Settings
C
Y
P
O
You can make settings for the print type, date and file number. These
settings apply to all selected images, and cannot be set individually.
Select [Print Settings].
● Press the · button, select the 2 tab.
Press the op buttons to select [Print
Settings], then press the m button.
Make the settings.
● Press the op buttons to select an item,
then use the qr buttons to select a
setting.
114
(EC255) CDP-E065_Guide_E.book Page 115 Friday, July 4, 2008 10:35 AM
Designating Images for Printing (DPOF)
Print Type
Date
File No.
Clear DPOF
data
Standard
Index
Both
On
Off
On
Off
On
Off
Prints one image per page.
Prints several reduced size images per page.
Prints both standard and index formats.
Prints date from shooting information.
–
Prints file number.
–
Clears all print settings after printing.
–
• Depending on the printer or photo developer, print settings may not be
reflected.
•
Y
P
O
may display when using a memory card with transfer settings set by
a different camera. If you change settings with this camera, the
previously made settings may be overwritten.
• Images with the date embedded using
(p. 63), always print with the
date, regardless of the [Date] setting. As a result, some printers may
print the date twice on these images if [Date] is also set to [On].
C
• When set to [Index], [Date] and [File No.] cannot be set to [On] at the
same time.
• The date will print in the style set in [Date/Time] in the 3 tab (p. 19).
115
(EC255) CDP-E065_Guide_E.book Page 116 Friday, July 4, 2008 10:35 AM
C
116
Y
P
O
(EC255) CDP-E065_Guide_E.book Page 117 Friday, July 4, 2008 10:35 AM
8
Customizing the Camera
This chapter expands on the normal usage of the camera by
explaining how to set useful functions, and change shooting mode
settings.
C
Y
P
O
117
(EC255) CDP-E065_Guide_E.book Page 118 Friday, July 4, 2008 10:35 AM
Changing Functions
The functions listed in the 3 tab are useful functions that you can set for normal
usage. You can set them in the Shooting or Playback mode, by pressing the ·
button.
Turning Off the Start-up Image
You can turn off the start-up image that displays when you turn on the
camera.
● Select [Start-up Image], then press the qr
buttons to select [Off].
Y
P
O
Turning off the Power Saving Function
You can set the power saving function (p. 42) to [Off]. However, setting to
[On] is recommended to save battery power.
C
● Choose [Power Saving], then press the m
button.
● Press the op buttons to select [Auto Power
Down], then use the qr buttons to select [Off].
● If you set [Auto Power Down] to [Off], be
careful not to forget to turn off the camera after
use.
118
(EC255) CDP-E065_Guide_E.book Page 119 Friday, July 4, 2008 10:35 AM
Changing Functions
Power Saving during Shooting
You can change the time at which the screen shuts down automatically
during shooting (p. 118). This also works when [Auto Power Down] is set to
[Off].
In order to save battery power, it is recommended to choose less than
[1min.].
● Choose [Power Saving], then press the m
button.
● Press the op buttons to select [Display Off],
then use the qr buttons to select a time.
Y
P
O
Changing the File Number Assignment
Images you shoot are automatically assigned file numbers, in the order they
were taken, from 0001 – 9999, and saved to folders of up to 2000 images.
You can change the file number assignment.
C
● Select [File Numbering], then press the qr
buttons to select a setting.
● [Continuous]: Even if you shoot using a new
memory card, the file numbers are assigned
consecutively until an image with the number
9999 is taken/saved.
[Auto Reset]: If you replace the memory card
with a new one, file numbers are assigned
starting with 0001 consecutively.
• For either setting [Continuous] or [Auto Reset], if you use a memory card
already containing images, the newly assigned file numbers may
continue the existing numbering. If you want to start over with file
number 0001, format the memory card before use (p. 49).
• Refer to the Software Starter Guide for information regarding folder
structure or image type.
119
(EC255) CDP-E065_Guide_E.book Page 120 Friday, July 4, 2008 10:35 AM
Changing Functions
Creating a Folder
You can create new folders to save your images to.
● Select [Create Folder], then press the m button.
● Press the op buttons to select [Create New
Folder], then press the qr buttons to select
.
X When in Shooting mode, the
displays.
Newly shot images are now saved to the new
folder.
Creating Folders by Day and Time
Y
P
O
You can set a day and time for folder creation.
● Select [Create Folder], then press the m button.
● Press the op buttons to select [Auto Create],
then press the qr buttons to select an
interval.
● Press the op buttons to select [Time], then
press the qr buttons to set a time.
X The new folder will be created on the set day
and time. Images shot after the creation date
are saved to the new folder.
C
Turning off Auto Rotate
When you play back images on the camera, images shot in vertical
orientation automatically rotate and display vertically. You can turn off this
function.
● Select [Auto Rotate], then press the qr
buttons to select [Off].
120
(EC255) CDP-E065_Guide_E.book Page 121 Friday, July 4, 2008 10:35 AM
Changing Shooting Functions
Changing the Lens Retract Time
The lens retracts about 1 minute after switching to Playback mode, for safety
reasons. You can set the retract time to [0 sec.].
● Select [Lens Retract], then press the qr
buttons to select [0 sec.].
Y
P
O
Changing Shooting Functions
You can set functions in the 4 tab after pressing the · button while in
Shooting mode. Some functions may not be available, depending on the
shooting mode. Refer to the 4 (Shooting) Tab Menu section (p. 136).
Using the Slow Synchro
C
Shoot with the flash and a slow shutter speed. Lightens dark backgrounds
when shooting night sceneries or indoors using a flash. You can use Slow
Synchro to get the same results as with
(p. 57).
● Select [Flash Settings], then press the m
button.
● Press the op buttons to select [Slow
Synchro], then press the qr buttons to select
[On].
In order to reduce camera shake, attach the camera to a tripod so that it
does not move. When you attach the camera to a tripod, you are
recommended to set [IS Mode] to [Off] to shoot (p. 124).
121
(EC255) CDP-E065_Guide_E.book Page 122 Friday, July 4, 2008 10:35 AM
Changing Shooting Functions
Using the Auto Red-Eye Correction Function
This function automatically reduces red-eye. Only the corrected image will
be recorded to the memory card.
● Select [Flash Settings], then press the m
button.
● Press the op buttons to select [Red-Eye
Corr.], then press the qr buttons to select
[On].
• Red-eye correction may be applied to other red parts than red eyes. For
example, when red make-up has been used around eyes.
Y
P
O
• Depending on the image, red-eye may not be detected automatically
and correction may not be applied as you expected. If this occurs, select
in the 1 tab the [Red-Eye Correction] to apply correction (p. 105).
Turning off the Red-Eye Lamp
C
The lamp lights in order to reduce the red-eye effect that occurs when
shooting in dark conditions using the flash. You can turn off this function.
● Select [Flash Settings], then press the m
button.
● Press the op buttons to select [Red-Eye
Lamp], then press the qr buttons to select
[Off].
122
(EC255) CDP-E065_Guide_E.book Page 123 Friday, July 4, 2008 10:35 AM
Changing Shooting Functions
Turning off the AF-Assist Beam
When the camera has focusing difficulties while you press the shutter button
halfway, the AF-assist Beam will automatically light to assist focusing. You
can turn off this function.
● Select [AF-assist Beam], then press the qr
buttons to select [Off].
Y
P
O
Displaying the Overlay
You can display grid lines for vertical and horizontal guidance, or 3:2 guide
to confirm the printable area for L size or postcard size prints.
● Select [Disp. Overlay], then press the qr
buttons to select a setting.
● [Grid Lines]: A grid overlays the display.
[3:2 Guide]: The areas outside the 3:2 range
are grayed out.
These areas will not print when printing on
paper of 3:2 aspect ratio.
C
• In
,
and
modes, you cannot set [3:2 Guide] and [Both].
• Grid lines will not be recorded on the image.
• The gray areas on the top and bottom of the screen will not be printed;
however, the entire image displayed will be recorded.
123
(EC255) CDP-E065_Guide_E.book Page 124 Friday, July 4, 2008 10:35 AM
Changing Shooting Functions
Changing the Image Stabilization (IS Mode)
● Select [IS Mode], then press the qr buttons to
select a setting.
● [Continuous]: The image stabilization is
always on. You can confirm the result directly
on the screen which makes it easier to check
the composition or focus of the subject.
[Shoot Only]: The image stabilization is only
on in the moment of shooting.
[Panning]: The image stabilization only works
for the effect of up and down motion. This
option is recommended for shooting objects
moving horizontally.
Y
P
O
• If camera shake is too strong, fix the camera to a tripod. When you
attach the camera to a tripod, you are recommended to set [IS Mode] to
[Off] to shoot.
• When using [Panning], make sure to hold the camera horizontally. The
Image Stabilization does not work when the camera is held vertically.
C
Registering Functions to the c Button
● Select [Set c button], then press the m
button.
● Press the opqr buttons to select the
functions to register, then press the m button.
● When you press the c button, you can use
the registered function or display the setting
screen for the selected function.
• Select
if you want to cancel a function.
• When this
symbol is shown on the bottom right of an icon, the
function cannot be used in the current shooting mode.
• In
, each press of the c button records white balance data (p. 73),
and the white balance settings also change to
.
124
(EC255) CDP-E065_Guide_E.book Page 125 Friday, July 4, 2008 10:35 AM
9
Useful Information for Using
the Camera
Y
P
O
This chapter introduces camera accessories, contains lists of
functions and the index.
C
125
(EC255) CDP-E065_Guide_E.book Page 126 Friday, July 4, 2008 10:35 AM
Using Household Power
If you use AC Adapter Kit ACK800 (sold separately), you can use the
camera without worrying about how much charge is left in the batteries.
Turn the camera off.
Plug the cord into the camera.
● Open the camera’s terminal cover and
insert the plug into the camera.
Connect the power cord.
● Connect the power cord to the compact
Y
P
O
power adapter, then plug the other end
into a power outlet.
● You can turn the camera on to use it.
● After you finish, turn off the camera and
unplug the power cord from the power
outlet.
C
Do not unplug the power cord with the camera turned on. This could
erase images you have taken or damage the camera.
Using a Supplementary Flash
High-Power Flash HF-DC1 (sold separately) is used to supplement the
camera’s built-in flash when the subject is too far away for proper
illumination. For details on attaching and using the High-Power Flash, refer
to the user guide provided with the flash.
126
(EC255) CDP-E065_Guide_E.book Page 127 Friday, July 4, 2008 10:35 AM
Handling Precautions
Equipment
• This camera is a high-precision electronic device. Do not drop it or
subject it to strong impact.
• Never place the camera close to magnets or motors that generate strong
electromagnetic fields. Exposure to strong magnetic fields may cause
malfunctions or corrupt image data.
• If water droplets have fallen or dirt is stuck on the camera or LCD monitor,
wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force.
• Never use cleaners including organic solvents to wipe the camera or LCD
monitor.
• Use a commercially available blower brush to remove dust from the lens.
For stubborn dirt contact the closest Canon Customer Support Help Desk
as listed on the customer support leaflet supplied with your camera.
• When you move the camera rapidly from cold to hot temperatures,
condensation may form on the internal or external surfaces of the
camera. To avoid condensation, put the camera in an airtight, resealable
plastic bag and let it adjust to temperature changes slowly before
removing it from the bag.
• When condensation has formed, stop using the camera immediately.
Continued use may damage the camera. Remove the batteries and
memory card, and wait until the moisture has completely evaporated
before resuming use.
C
Y
P
O
Memory Cards
• Memory cards are high-precision electronic devices. Do not bend, apply
force or subject to strong impact. Doing so may corrupt image data
recorded on the memory card.
• Do not spill liquids on the memory card. Do not touch the memory card's
terminals with your hands or metallic objects.
• Do not store memory cards near a TV, speakers or other devices that
generate magnetism or static electricity. Doing so may corrupt image
data recorded on the memory card.
• Do not store memory cards in hot, humid or dusty locations.
127
(EC255) CDP-E065_Guide_E.book Page 128 Friday, July 4, 2008 10:35 AM
You Think There is a Problem
If you think there is a problem with the camera, first check the following. If
the items below do not solve your problem, contact a Canon Customer
Support Help Desk as listed on the included customer support list.
Power
You pressed the power button, but nothing happened.
•
•
•
•
Confirm that the batteries are properly inserted (p. 14).
Confirm that the memory card slot/battery cover is securely closed (p. 15).
Confirm that the batteries are charged (p. 16).
Clean the terminals with a cotton swab and re-insert the batteries several times.
Batteries are consumed quickly.
• Confirm that you are using the correct battery type (p. 16).
• In low temperatures, battery performance may be weak. Warm the batteries, such as
by placing them in your pocket.
• If the battery terminals have become dirty, battery performance may be weak. Clean
the terminals with a cotton swab and re-insert the batteries several times.
Lens will not retract.
Y
P
O
• Do not open the memory card slot/battery cover while the power is on. After closing
the cover, turn the power on then back off (p. 14).
TV output
C
Image is distorted or not showing on TV.
• Set the video setting, NTSC or PAL, for your TV (p. 100).
Shooting
Screen does not display.
• Press the ⁄ button to turn on the screen (p. 45).
Screen does not display properly while shooting.
• The display automatically brightens when shooting in dark conditions. Noise may
appear and the movement of the subject on the screen may appear somewhat
jagged. This has no effect on the recorded image (p. 45).
The following situations will not record on still images but will record on movies.
• When the camera is subjected to powerful light sources, the display may darken.
• Under fluorescent lighting, the screen may flicker.
• When shooting bright light sources, a bar of light (purplish red) may appear on the
screen.
128
(EC255) CDP-E065_Guide_E.book Page 129 Friday, July 4, 2008 10:35 AM
You Think There is a Problem
Display turned off while shooting.
• When the flash has finished charging, the display will return (p. 23).
appears when the shutter button was pressed halfway.
•
•
•
•
Set the IS Mode to [Continuous] (p. 124).
Set the flash to any setting other than
(p. 59).
Increase the ISO speed (p. 72).
Attach the camera to a tripod so that the camera does not move.
Image is blurred.
• Press the shutter button halfway to focus on the subject, then press fully to shoot
(p. 21).
• Shoot the subject within the focusing distance (p. 140).
• Refer to "
appears when the shutter button was pressed halfway" above.
• Set the AF-assist Beam to [On] (p. 123).
• Confirm that functions which you do not intend to use (macro, etc.) are not set.
• Shoot using the focus lock or AF lock (p. 85).
Y
P
O
Even when you press the shutter button halfway, the frame does not
appear, and the camera does not focus.
• If you center on the light and dark contrasting area of the subject and press the
shutter button halfway, or repeatedly press the shutter button halfway, the frame will
appear and the camera will focus.
C
Subject is too dark or too bright (overexposed).
•
•
•
•
Set the flash to
(p. 59).
Adjust the brightness with exposure compensation (p. 74).
Use the AE lock, or spot metering to shoot (pp. 85, 86).
The subject is too bright due to ambient lighting.
Image is dark even though the flash fired.
• Shoot within an appropriate distance for flash photography (p. 140).
• Increase the ISO speed (p. 72).
Subject in an image taken using the flash is too bright (overexposed).
• Shoot within an appropriate distance for flash photography (p. 140).
• Set the flash to
(p. 59).
White dots appear on the image when shooting with the flash.
• Light from the flash has reflected off dust particles or other objects in the air.
Image appears rough or grainy.
• Shoot with the ISO speed on a lower setting (p. 72).
• Depending on the shooting mode the ISO speed may be high and the image may
appear rough or grainy (pp. 55, 58).
129
(EC255) CDP-E065_Guide_E.book Page 130 Friday, July 4, 2008 10:35 AM
You Think There is a Problem
Eyes appear red.
• Set [Red-Eye Lamp] to [On]. This is effective if the subject looks right at the red-eye
reduction lamp. Even better results can be obtained by increasing the lighting in
indoor settings or approaching closer to the subject. The shutter will not close for
approx. 1 second when the lamp lights (p. 23).
• You can set the [Red-Eye Corr.] to [On] to automatically correct red-eye while
shooting. You can also make corrections after the image is taken, using [Red-Eye
Correction] (pp. 105, 122).
Image seen in the viewfinder and the recorded image are slightly different.
• You can check the actual image size on the screen (p. 45). If you use Macro mode,
the difference is even stronger. Use the screen to compose the image.
Recording images to the memory card takes a long time, or continuous
shooting slows down.
Y
P
O
• Low-level formatting the memory card in the camera may solve the problem (p. 50).
Cannot set shooting functions or Func. menu settings
• Depending on the shooting mode, available functions vary. Refer to the Functions
Available in Each Shooting Mode section (p. 134).
Shooting movies
C
Recording time does not display correctly or shooting stops unexpectedly.
• Format the memory card in the camera, or use a memory card capable of recording
at high speeds. Even if the recording time is not displayed correctly, the movie will be
recorded correctly on the memory card (pp. 29, 49).
< ! > displayed on the screen, and shooting ended automatically.
•
•
•
•
Camera's internal memory was insufficient. Try one of the following measures.
Low-level format the memory card in the camera (p. 50).
Lower the number of recording pixels (p. 90).
Use a memory card capable of recording at high speeds.
Zoom does not operate.
• Zoom before shooting movies. In
(p. 90).
130
mode, you can also use the digital zoom
(EC255) CDP-E065_Guide_E.book Page 131 Friday, July 4, 2008 10:35 AM
You Think There is a Problem
Playback
Cannot play back.
• If the file name or folder structure is changed on a computer, you may not be able to
play back images or movies. Refer to the Software Starter Guide for information
regarding folder structure or file names.
Playback stops, or audio cuts out.
• Use a card that has been formatted on this camera (p. 49).
• If you copy a movie to a memory card that reads slowly, playback may interrupt
momentarily.
• When playing movies on your computer, depending on the computer's capabilities, it
may drop frames, or the audio may cut out.
Cannot operate buttons or zoom lever.
Y
P
O
• When the mode dial is set to Easy mode, some buttons and the zoom cannot be
used (p. 54).
List of Messages
Messages appear on the screen.
• Refer to the Error Messages section (p. 132).
C
131
(EC255) CDP-E065_Guide_E.book Page 132 Friday, July 4, 2008 10:35 AM
Error Messages
If error messages appear on the screen, try one of the following solutions.
No memory card
• The memory card may be inserted in the wrong orientation. Insert the memory card
in the correct orientation (p. 14).
Card locked!
• The SD memory card or SDHC memory card's write protect tab is set to "Lock".
Unlock the write protect tab (pp. 14, 17).
Cannot record!
• You attempted to shoot an image without a memory card installed or with a memory
card installed in the wrong orientation (p. 14).
• You cannot attach sound memos to movies.
Memory card error
• The memory card is malfunctioning. Formatting the memory card may solve the
problem (p. 49). If this error message appears even when using the supplied memory
card, contact your Canon Customer Support Help Desk as there may be a problem
with the camera.
Memory card full
Y
P
O
• There is not enough free space on the memory card. Erase the images (pp. 25, 101)
to open space for new images, or insert an empty memory card (p. 14).
Change the batteries
C
• Battery charge is low. Change the batteries (p. 16).
No Image.
• There are no images recorded on the memory that can be displayed.
Protected!
• Protected images, movies or sound memos cannot be erased. Remove protection
before erasing (p. 102).
Unidentified Image/Incompatible JPEG/Image too large./RAW
• Unsupported images or data, or corrupted image data cannot be displayed.
• Images manipulated on a computer, that have had their file name changed, or have
been taken with a different camera may not display.
Cannot magnify!/Cannot rotate/Cannot modify image
• Unsupported images cannot be magnified (p. 97), rotated (p. 104) or edited (pp. 103,
105).
• Images manipulated on a computer, that have had their file name changed, or have
been taken with a different camera may not be magnified, rotated or edited.
• Movies cannot be magnified (p. 97) or edited (pp. 103, 105)
132
(EC255) CDP-E065_Guide_E.book Page 133 Friday, July 4, 2008 10:35 AM
Error Messages
Incompatible WAVE
• Since the data type of the existing sound memo is incorrect., no new sound memo
can be added or played back (p. 107).
Naming error!
• The file name could not be created because there is an image with the same name
as the folder that the camera is attempting to create, or the highest possible file
number has already been reached (p. 120). In the 3 tab, set [File Numbering] to
[Auto Reset] (p. 119) or format the memory card (p. 49).
Cannot transfer!
• Unsupported or corrupted image data cannot be transferred, even when set in Direct
Transfer (pp. 34, 108).
• Movies selected in [Wallpaper] cannot be transferred (p. 108).
Too many marks
Y
P
O
• The number of images for print settings or transfer settings exceeds 998. Set 998 or
less images for print or transfer (pp. 109, 111).
Cannot complete!
• Print settings or transfer settings could not be saved correctly. Reduce the number of
settings and try again (pp. 109, 111).
Unselectable image
C
• Unsupported images cannot be set for printing (p. 111).
• Images manipulated on a computer, that have had their file name changed, or have
been taken with a different camera may not be supported.
Communication error
• Images could not be transferred to the computer due to the large amount of images
(approx. 1000) stored on the memory card. Use a commercially available USB card
reader to transfer the images.
Lens error, restart camera
• A lens error was detected. Press the power button to turn the camera off and back on
(p. 22). If this error message continues to display, contact your Canon Customer
Support Help Desk as there may be a problem with the lens.
• This error can occur if you hold the lens while it is in motion or when using it in a
location with excessive dust or sand in the air.
Exx (xx: number)
• Camera detected an error. Press the power button to turn the power off and then
back on (p. 22). If an error code displays directly after taking a picture, the shot may
not have been recorded. Check image in playback mode.
• If this error code reappears, note the number and contact your Canon Customer
Support Help Desk as there may be a problem with the camera.
133
(EC255) CDP-E065_Guide_E.book Page 134 Friday, July 4, 2008 10:35 AM
Functions Available in Each Shooting Mode
Shooting modes
Function
Long Shutter
*1
ISO Speed (p. 72)
Flash (p. 59)
Drive Mode (pp. 60, 69, 78)
Shooting Zone (pp. 64, 65)
SelfTimer
My Colors (p. 75)
Metering System (p. 85)
Compression Ratio (still images) (p. 70)
Number of Recording Pixels
(still images) (p. 70)
Number of Recording Pixels, Frame
Rate, Compression (Movie) (p. 90)
{
{
—
—
{
—
{
{
—
{
{
{
{
—
—
{
—
—
—
{
{
{
—
{
—
—
{
—
{
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
{
—
{
{
{
{
{
{
{
{
{
—
—
—
—
{
{
{
{
{
—
—
{
{
{
—
—
—
—
—
{
—
—
{
—
—
{
{
{
—
—
—
—
—
{
—
—
{
—
—
—*2
—*3
—
—
—
—
Function menu
Exposure Compensation (p. 74)
Long Shutter (p. 88)
White Balance (p. 73)
—
—
{
—
—
{
{
{
{
{
{
{
{
{
—
{
—
—
{
{
{
{
Y
P
O
All Range
Face Select (p. 83)
AE/FE Lock (still images) (pp. 86, 87)
AE Lock, Exposure Shift (movies) (p. 91)
AF Lock (p. 85)
Display Off
LCD Monitor Setting (p. 45)
No Information
Information View
C
{
{
{
—
{
{
{
{
{
{
{
{
{
{
—
{
{
—
{
{
{
{
*1
*1 Optimum value is automatically set by the camera. *2 Fixed to
*3 Fixed to
(Large). *4 Fixed to .
134
(Fine).
(EC255) CDP-E065_Guide_E.book Page 135 Friday, July 4, 2008 10:35 AM
Functions Available in Each Shooting Mode
{
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
{
{
{
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
C
{
—
—
—
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
—
—
{
{
{
{
{
{
—
—
—
—
—
—
—
{
{
{
Y
P
O
{
—
—
—
—
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
—
—
—
{
—
—
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
—
—
—
{
—
{
—
{
{
{
—
—
—
{
{
—
{
{
{
—
—
—
—
—
—
{
—
{
—
{
{
{
—
—
—
{
{
—
{
{
Function menu
{
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
—
—
—
—
—
—
—
{
{
—
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{ —*4 —
—
{
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
{
—
—
—
—
—
—
—
—
{
—
—
—
—
—
—
—
—
—
{
{ Setting available. — Setting not available.
135
(EC255) CDP-E065_Guide_E.book Page 136 Friday, July 4, 2008 10:35 AM
Menus
(Shooting) Tab Menu
Shooting modes
Function
AF Frame (p. 80)
AF Frame Size (p. 81)
Long Shutter
Face Detect
{
{
{
{
AiAF
{
{
{
—
—
Center
{
{
{
Normal
{
{
{
{
Small
{
{
—
—
{
{
{
—
{
{
{
{*2
—
AF-Point Zoom (p. 82)
Digital Zoom*1 (p. 61)
Flash Settings
(pp. 121, 122)
Standard
{
{
{
{
{*2
—
—
Red-Eye Corr.
{
{
{
—
Red-Eye Lamp
{
{
{
{*2
{
{
{
—
{
{
{
{*2
{*3
Self-Timer (Custom Timer) (p. 78)
AF-assist Beam (p. 123)
C
Review (Rec. review) (p. 52)
Review Info (p. 45)
Auto Category (p. 96)
Disp. Overlay (p. 123)
IS Mode (p. 124)
Y
P
O
Digital Tele-converter 1.4x/2.3x
Slow Synchro
Off
Detailed/Focus Check
{
{
{
{
{
{
{
{
—
{*2
{
{
{
Off
{
{
{
{
Grid Lines
{
{
{
—
3:2 Guide/Both
{
{
{
—
Off
{
{
{
—
Continuous
{
{
{
{
{
{
{
—
{
{
{
—
Shoot Only/Panning
c Registering settings to the Print/Share button
(p. 124)
*1 Can not be set when
or
is selected.
*2 Always set to On.
*3 Fixed to [2 sec.].
*4 Only when the flash is set to .
136
{
{
(EC255) CDP-E065_Guide_E.book Page 137 Friday, July 4, 2008 10:35 AM
Menus
{
{
{
{
{
{
{
{
{
{
—
{
{
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
{
{
—
{
—
{*2 {*2
{
{
—
—
{
Y
P
O
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
{
{
{
{
—
{
—
—
—
{
{
{
{
—
{
—
—
—
{
{
{
{
{
{
{
—
—
{
{
{
{
—
{*4
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
—
—
{
{*2 {*2
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
C
{ Setting available. — Setting not available.
137
(EC255) CDP-E065_Guide_E.book Page 138 Friday, July 4, 2008 10:35 AM
Menus
(Setting) Tab Menu
Item
Mute
Volume
Start-up Image
Power Saving
Date/Time
Format
File Numbering
Create Folder
Auto Rotate
Lens Retract
Language
Video System
Print Method
Reset All
Options/Summary
On/Off*
Off/1/2*/3/4/5
On*/Off
Auto Power Down: On*/Off
Display Off: 10, 20 or 30 sec./1*, 2 or 3 min.
Date (y/m/d) and time (h/m) settings
Formatting memory card, erasing all data
Continuous*/Auto Reset
Create New Folder/Auto Create
On*/Off
1 min. */0 sec.
Select displayed language
NTSC/PAL
Auto*/
Returns camera to default settings
C
Y
P
O
Ref. Page
p. 51
p. 51
p. 118
pp. 42, 118
p. 18
p. 49
p. 119
p. 120
p. 120
p. 121
p. 20
p. 100
–
p. 48
*Default setting
About Print Method setting
Select
when you print an image recorded in the
(Widescreen) mode at
the full page setting for wide paper using a Canon SELPHY CP750/CP740/
CP730/CP720/CP710/CP510 Compact Photo Printer. Since this setting is saved
even when the power is turned off, ensure that you return the setting to [Auto] to
print other image sizes.
138
(EC255) CDP-E065_Guide_E.book Page 139 Friday, July 4, 2008 10:35 AM
Menus
(Playback) Tab Menu
Item
Slide Show
My Category
Red-Eye Correction
Resize
Sound Memo
Protect
Rotate
Erase all
Transfer Order
Resume
Options/Summary
Automatically plays back images.
Organizes images in categories.
Corrects red-eye in images.
Resizes and saves images.
Records and attaches sound to images.
Protects images.
Rotates images.
Erases all unprotected images.
Sets images to transfer to a computer.
Sets the image that displays when resuming
playback.
Transition
Y
P
O
Ref. Page
p. 98
p. 96
p. 105
p. 103
p. 107
p. 102
p. 104
p. 101
p. 109
–
p. 101
(Print) Tab Menu
Item
Print
Select Images & Qty.
Select All Images
Clear All Selections
Print Settings
Options/Summary
Prints images set for printing.
Sets images for printing.
Sets all images for printing.
Cancels all settings for printing.
Sets the printing style.
C
Ref. Page
p. 26
p. 113
p. 113
p. 114
p. 114
139
(EC255) CDP-E065_Guide_E.book Page 140 Friday, July 4, 2008 10:35 AM
Specifications
Camera Effective Pixels . . . .
Image Sensor . . . . . . . . . . . .
Lens. . . . . . . . . . . . . . . . . . . .
Digital Zoom . . . . . . . . . . . . .
Optical Viewfinder . . . . . . . . .
LCD Monitor . . . . . . . . . . . . .
AF Frame Mode
Focusing Range . . . . . . . . . .
(from end of lens)
Shutter . . . . . . . . . . . . . . . . . .
Shutter Speeds . . . . . . . . . . .
Image Stabilization . . . . . . . .
Metering System . . . . . . . . . .
Exposure Compensation . . . .
ISO speed . . . . . . . . . . . . . . .
(Standard Output Sensitivity,
Recommended Exposure
Index)
White Balance . . . . . . . . . . . .
Approx. 10.0 million
1/2.3.-inch type CCD (Total Pixels: Approx. 10.3
million)
6.2 (W) – 24.8 (T) mm (35mm film equivalent: 35 (W) –
140 (T) mm) f/2.7 (W) – f/5.6 (T)
Approx. 4.0x (Up to approx. 16x in combination with the
optical zoom)
Real-image zoom viewfinder
2.5-inch type TFT color LCD, approx. 115,000 dots
(Picture coverage 100%)
Face Detect, AiAF (9 points), Center
Normal: 50 cm (1.6 ft.) – infinity
Macro: 3 – 50 cm (W) (1.2 in. – 1.6 ft. (W))
30 – 50 cm (T) (1.0 – 1.6 ft. (T))
Infinity: 3 m (10 ft.) – infinity
Easy: 3 cm (1.2 in.) – infinity (W),
30 cm (1.0 ft.) – infinity (T)
Kids&Pets: 1 m (3.3 ft.) – infinity
Mechanical shutter and electronic shutter
1/60 – 1/1600 sec.
15 – 1/1600 sec. (Total shutter speed range. Available
range varies by shooting mode.)
Lens-shift type
Evaluative, Center-weighted average, Spot
±2 stops in 1/3-stop increments
Auto, High ISO Auto, ISO 80/100/200/400/800/1600
C
Built-in Flash . . . . . . . . . . . . .
Built-in Flash Range . . . . . . .
Shooting Modes. . . . . . . . . . .
Continuous Shooting . . . . . . .
Self-timer . . . . . . . . . . . . . . . .
Recording Media . . . . . . . . . .
File Format . . . . . . . . . . . . . .
140
Y
P
O
Auto, Day Light, Cloudy, Tungsten, Fluorescent,
Fluorescent H, Custom
Auto, On, Off
30 cm – 4.0 m (1.0 – 13 ft.) (W), 30 cm – 2.0 m (1.0 –
6.6 ft.) (T)
P, Auto, Easy, Portrait, Landscape, Night Snapshot,
Kids&Pets, Indoor, Special Scene*, Movie**
* Night Scene, Sunset, Foliage, Snow, Beach,
Fireworks, Aquarium, ISO 3200
** Standard and Compact
Approx. 1.3 shots/sec. (In Large/Fine mode)
Activates shutter after an approx. 10-sec./approx. 2sec. delay, Custom
SD memory card, SDHC memory card,
MultiMediaCard, MMCplus card, HC MMCplus card
Design rule for camera file system and DPOF
compliant
(EC255) CDP-E065_Guide_E.book Page 141 Friday, July 4, 2008 10:35 AM
Specifications
Data Type . . . . . . . . . . . . . . . . Still images: Exif 2.2 (JPEG)
Movies: AVI (Image data: Motion JPEG; Audio data:
WAVE (monaural))
Sound memos: WAVE (monaural)
Compression . . . . . . . . . . . . . . Superfine, Fine, Normal
Number of Recording Pixels . . Still images
Large: 3648 x 2736 pixels
Medium 1: 2816 x 2112 pixels
Medium 2: 2272 x 1704 pixels
Medium 3: 1600 x 1200 pixels
Small: 640 x 480 pixels
Date Stamp: 1600 x 1200 pixels
Widescreen: 3648 x 2048 pixels
Movies:
Standard: 640 x 480 pixels (30 frames/
sec.), 640 x 480 pixels (30 frames/sec.
LP), 320 x 240 pixels (30 frames/sec.)
Compact: 160 x 120 pixels (15 frames/
sec.)
Sound (Movie, Sound Memo) . Bit rate: 8 bits
Sampling Rate: 11 kHz
Playback Modes . . . . . . . . . . . Single/Index/Magnification/Easy/Slide Show/My
Category/Red-Eye Correction/Resize/Sound Memo/
Protect/Rotate/Focus Check/Jump/Movie Playback
Direct Print . . . . . . . . . . . . . . . PictBridge compliant, and Canon Direct Print and
Bubble Jet Direct compatible
Interface . . . . . . . . . . . . . . . . . Hi-Speed USB (mini-B), Audio/Video output (NTSC or
PAL selectable, monaural audio)
Communication Settings . . . . . MTP, PTP
Power Supplies . . . . . . . . . . . . 2 AA-size alkaline batteries
2 AA-size NiMH batteries NB4-300 (sold separately)
AC Adapter Kit ACK800 (sold separately)
Operating Temperatures . . . . . 0 – 40°C (32 – 104°F)
Operating Humidity . . . . . . . . . 10 – 90%
Dimensions . . . . . . . . . . . . . . . 101.2 x 63.8 x 31.4 mm (3.98 x 2.51 x 1.24 in.)
(excluding protrusions)
Weight (camera body only) . . . Approx. 160 g (5.64 oz.)
C
Y
P
O
141
(EC255) CDP-E065_Guide_E.book Page 142 Friday, July 4, 2008 10:35 AM
Index
Numerics
D
3:2 Guide ............................. 123
Date and Time Î Date/Time
Date/Time .............................. 18
Adding to Image.................. 63
Changing ............................ 19
Date/Time Battery ............... 19
Setting ................................ 18
Default Settings ...................... 48
Deleting Î Erasing
Digital Camera Solution Disk ..... 2
Digital Tele-Converter ............. 62
Digital Zoom ........................... 61
Direct Print ............................. 27
Direct Print User Guide ............. 2
Display Language ................... 20
Display Overlay .................... 123
DPOF........................... 109, 111
A
AC adapter kit ...................... 126
Accessories ............................ 36
AE Lock ................................. 86
AF Î Auto Focus
AF Frame ......................... 22, 80
AF Lock ................................. 85
AF-Point Zoom ....................... 82
AiAF....................................... 81
Aquarium (Scene Mode) ......... 58
Audio ..................................... 51
Auto Focus Î Focus
AV Cable .......................... 2, 100
C
B
Y
P
O
Batteries
Alkaline Batteries ............ 2, 14
Battery and Charger Kit ....... 38
Charge Indicator ................. 16
NiMH Battery (sold separately) .
16
Power Saving ............. 42, 118
Rechargeable Batteries (Date/
Time Battery) ...................... 19
Beach (Scene Mode) .............. 57
Black and White Images.......... 75
C
Camera Shake ............... 59, 124
Components Guide ................. 40
Compression Î Image Quality
Continuous Shooting............... 69
142
E
Easy Mode ....................... 24, 54
Editing
Red-Eye Correction .......... 105
Resizing (Making Images Smaller) .................................... 103
Rotating............................ 104
Enlarged Display .................... 82
Equipment
Default Settings .................. 48
Holding the Camera ............ 13
Erasing All Images ................ 101
Erasing Images ...................... 25
Error Messages .................... 132
Exposure
AE Lock.............................. 86
Correction........................... 74
FE Lock .............................. 87
(EC255) CDP-E065_Guide_E.book Page 143 Friday, July 4, 2008 10:35 AM
Index
F
Face Detect............................. 80
Face Select ............................. 83
Factory Settings Î Default Settings
FE Lock .................................. 87
File No .................................. 119
Fireworks (Scene Mode) .......... 58
Flash
Flash Off ............................. 59
Flash On ............................. 59
Supplementary Flash ......... 126
Focus...................................... 22
AF Frame ............................ 80
Focus Check ........................... 84
Focus Lock.............................. 76
Foliage (Scene Mode).............. 57
Format Î Memory Cards - Format,
Equipment - Default Settings
Formatting (Memory Card) ....... 49
FUNC. Menu
Basic List .......................... 134
Basic Operations ................. 46
G
C
Editing Î Editing
Erasing Images................... 25
Playback Î Viewing ........... 24
Indicator ........................... 41, 42
Indoor (Scene Mode) .............. 56
Infinity .................................... 65
Interface Cable ................. 26, 31
ISO Speed ............................. 72
ISO3200 (Scene Mode) .......... 58
K
Kids&Pets (Scene Mode) ........ 55
Y
P
O
Grid Lines ............................. 123
H
High Speed (ISO) .............. 58, 72
High-Power Flash .................. 126
Histogram ............................... 44
Household Power .................. 126
I
Image Quality (Compression Ratio)
70
Images
Display Time ....................... 52
L
L size ..................................... 71
Lamp ............................. 40, 122
Landscape (Scene Mode) ....... 55
LCD monitor Î Screen
Long Shutter Mode ................. 88
M
Macro .................................... 64
Magnifying Images.................. 97
Memory Cards
Available Shots ............. 17, 71
Format ............................... 49
Menu Functions (Basic Operations)
47
Menus .................................. 136
Metering Mode ....................... 85
MMCplus/HC MMCplus Memory
Card, MultiMedia card Î Memory
Cards
Mode Dial ............................... 40
Movies ................................... 28
Image Quality (Frame Rate) 91
Mode.................................. 90
Recording Pixels ................. 90
143
(EC255) CDP-E065_Guide_E.book Page 144 Friday, July 4, 2008 10:35 AM
Index
Shooting Time .............. 29, 91
Viewing (Playback) ............. 30
MultiMedia card Î Memory Cards
My Category ........................... 96
My Colors ............................... 75
N
Night Scene (Scene Mode) ..... 57
Night Snapshot (Scene Mode) . 55
Number of Shots..................... 17
P
PictBridge ........................ 26, 27
Playback Button ..................... 41
Playback Î Viewing
Portrait (Scene Mode) ............. 55
Postcard Size ......................... 71
Power Button .......................... 22
Power Î Batteries
Power Saving ................. 42, 118
Print List ............................... 111
Print Settings (DPOF) ........... 114
Print/Share Button .......... 26, 124
Printer ...................... 26, 27, 112
Printing .................................. 26
Program AE ........................... 68
Protect ................................. 102
C
S
Safety Zoom ........................... 61
Screen
Information Displayed ......... 43
Language ........................... 20
Menu Operations .......... 46, 47
Switching the Display .......... 45
SD/SDHC memory cards Î Memory Cards
Self-Timer
Changing Delay and Number of
Shots ................................. 78
Shoot ................................. 60
Sepia Tones ........................... 75
Shooting Date and Time Î Date/
Time
Shooting Using a TV ............... 77
Shutter Button ........................ 21
Slide Show ............................. 98
Snow (Scene Mode) ............... 57
Software
Digital Camera Solution Disk . 2
Software Starter Guide .......... 2
Transferring Images to a Computer ...................................... 31
Sound .................................... 51
Sound Memos ...................... 107
Strap .................................. 2, 13
Sunset (Scene Mode) ............. 57
Supplementary Flash ............ 126
Y
P
O
R
Recording Pixels (Image Size). 70
Red-Eye
Auto Correction ................. 122
Red-Eye Correction .......... 105
Reduction ......................... 122
Resizing (Making Images Smaller)
T
103
Transition Effects .................... 98
Troubleshooting (You Think There
Rotating Images ................... 104
144
Terminal ........... 26, 33, 100, 126
Tone (White Balance) ............. 73
Transferring Images to a Computer
31, 34, 108, 109
(EC255) CDP-E065_Guide_E.book Page 145 Friday, July 4, 2008 10:35 AM
Index
Is a Problem) ......................... 128
V
Video Î Movies
Viewfinder ......................... 41, 77
Viewing (Playback) .................. 93
AF-Point Zoom .................... 82
Enlarged Display ................. 97
Index Playback .................... 94
Single Image Playback ......... 24
Slide Show .......................... 98
Viewing Images on a TV .... 100
W
Y
P
O
White Balance ......................... 73
Widescreen ............................. 71
Z
Zoom .......................... 22, 28, 61
C
145
(EC255) CDP-E065_Guide_E.book Page 146 Friday, July 4, 2008 10:35 AM
Trademark Acknowledgments
• The SDHC logo is a trademark.
Disclaimer
• Reprinting, transmitting, or storing in a retrieval system any part of this
guide without the permission of Canon is prohibited.
• Canon reserves the right to change the contents of this guide at any time
without prior notice.
• Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
• Every effort has been made to ensure that the information contained in
this guide is accurate and complete. However, if you notice any errors or
omissions, please contact the Canon customer service center indicated
on the customer support list included with the product.
• The above items notwithstanding, Canon accepts no liability for damages
due to mistaken operation of the products.
C
Y
P
O
For CA, USA only
Included lithium battery contains Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
146
(EC255) CDP-E065_Guide_E.book Page 147 Friday, July 4, 2008 10:35 AM
C
Y
P
O
147
(EC255) CDP-E065_Guide_E.book Page 148 Friday, July 4, 2008 10:35 AM
C
CDP-E065-010
Y
P
O
Camera U
ENG
© CANON INC. 2008
Download PDF