Asus | RS700-X7 PS4 | Specifications | Asus RS700-X7 PS4 Specifications

RS700-X7/PS4
Configuration Guide
E7373
First Edition V1
June 2012
Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means,
except documentation kept by the purchaser for backup purposes, without the express written permission
of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS provides this manual “as is” without warranty of any kind, either express or implied, including but not
limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no
event shall ASUS, its directors, officers, employees, or agents be liable for any indirect, special, incidental,
or consequential damages (including damages for loss of profits, loss of business, loss of use or data,
interruption of business and the like), even if ASUS has been advised of the possibility of such damages
arising from any defect or error in this manual or product.
Specifications and information contained in this manual ae furnished for informational use only, and are
subject to change at any time without notice, and should not be construed as a commitment by ASUS.
ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual,
including the products and software described in it.
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
II
Contents
Revision history........................................................................................... III
Safety information....................................................................................... IV
Chapter 1:
Product introduction
1.1
Key features................................................................................... 1-2
1.3
Front panel features...................................................................... 1-5
1.2
1.4
1.5
System overview........................................................................... 1-4
Rear panel features....................................................................... 1-5
System specifications.................................................................. 1-6
Chapter 2:
Components
2.1
Upgrading CPU and CPU heatsink.............................................. 2-2
2.3
Upgrading hard disk drives.......................................................... 2-6
2.2
2.4
2.5
2.6
2.7
2.8
Upgrading system memory.......................................................... 2-4
Installing ASUS PIKE RAID module............................................ 2-7
Installing an expansion card to the riser card bracket.............. 2-8
Installing optical drive.................................................................. 2-9
Friction rail kit............................................................................. 2-10
OS support list............................................................................ 2-11
Revision history
Revision
Revision history
Date
V1
First release of RS700-X7/PS4 configuration guide
June 2012
III
Safety information
Electrical Safety
•
•
•
•
Before installing or removing signal cables, ensure that the power cables for
the system unit and all attached devices are unplugged.
To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
When adding or removing any additional devices to or from the system, contact
a qualified service technician or your dealer. Ensure that the power cables for
the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you service.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your dealer.
Operation Safety
•
•
•
•
•
Servicing of this product or units is to be performed by trained service
personnel only.
Before operating the server, carefully read all the manuals included with the
server package.
Before using the server, ensure all cables are correctly connected and the
power cables are not damaged. If any damage is detected, contact your dealer
as soon as possible.
To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Place the server on a stable
surface.
This product is equipped with a three-wire power cable and plug for the user’s
safety. Use the power cable with a properly grounded electrical outlet to avoid
electrical shock.
Lithium-Ion Battery Warning
CAUTION! Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCT
Heavy System
CAUTION! This server system is heavy. Ask for assistance when moving or
carrying the system.
IV
This chapter describes the key features
of RS920A-E6 and RS926A-E6. It
includes the product overview and
general specifications.
Product introduction
Chapter 1
1-
1.1
Key features
High performance 1U server with great expandability and
flexibility
The RS700-X7/PS4 is a space-saving 1U server featuring high memory and
storage capacity, flexible RAID, 2+1 expansion slots, 80 PLUS Gold power supply,
and quad LAN. It's designed for telecom server centers, IDC, and all small and
medium businesses facing space constraints.
Optimized cooling design
Front-parallel CPU and memory placement guides smooth airflow throughout the
chassis, while intelligent fan control technology adjusts fan speeds automatically
based on system load.
Flexible 2+1 expansion in a 1U chassis
Despite 1U space requirements, the RS700-X7/PS4 manages to offer two PCI
Express 3.0 slots and one extra slot dedicated to exclusive ASUS PIKE cards,
helping users with better server integration.
Up to 92% power efficiency
Maintaining the ASUS commitment to environmental protection, the RS700-X7/PS4
is equipped with a 600W 80 PLUS Gold power supply to reduce power loss and
consumption. As such, it lowers power bills to save users money with up to 92%
power efficiency.
Innovative storage and RAID
The RS700-X7/PS4 supports optional ASUS PIKE RAID upgrade kits. With a PIKE
card, users can integrate server functions into data security, and upgrade from
SATA to SAS storage without occupying the two PCI Express 3.0 slots. This gives
users better flexibility through more storage options.
High availability and reliability
The RS700-X7/PS4 uses hot-swap features for high availability and easy
upgrades, allowing users to replace drive modules with no hassles. Additionally,
the proprietary ASUS anti-vibration fan module cage provides superior cooling with
no reliability compromise.
Quad LAN support
Four LAN ports provide high networking bandwidth with load balance and fault
tolerance functions. The server supports ASUS and most other available 10Gb/s
LAN cards for extra-fast networking.
1-2
Chapter 1: Product introduction
Outstanding computing capabilities
With support for new Intel® Sandy Bridge Socket R/LGA 2011 and 12 DIMM
memory slots, the RS700-X7/PS4 provides improved computing power for
customers that demand an extensive range of applications.
Onboard ASMB6-iKVM remote management upgrade kit
The exclusive ASUS ASMB6-iKVM enables dashboard system health monitoring,
remote power on/off control, virtual media over LAN, automatic video recording,
and network bonding support. In addition, the ASMB6 function is based on BIOSlevel access, so even if the server operating system is down, the KVM module
can still provide round-the-clock remote monitoring and diagnosis through a userfriendly graphical user interface.
ASUS RS700-X7/PS4
1-3
1.2
System overview
7
2
6
1
8
3
9
9
5
4
Items
Items
1. Central processing unit (CPU)
6.����������������������������������
ASUS PIKE SAS RAID card (optional)
2.CPU heatsink
7.������������������
Riser card bracket
3. System memory
8.�����������
System fans
4. HDD
���������
trays
9.���������������������������
Friction rackmount rail kit
5. Hard
����������������
disk drives
1-4
Chapter 1: Product introduction
1.3
Front panel features
Hot-swap SATA 6Gb/s HDD bays
Hot-swap SATA 3Gb/s HDD bays
Rack screw
Rack screw
2
USB ports
HDD Access LED
LAN2/4 LED
LAN1/3 LED
Message LED
Reset button
Location LED
Location switch
Slim-type optical drive (optional)
1.4
1
Power
button
Power LED
Rear panel features
Gigabit LAN port 4
Power supply
Gigabit LAN port 3
Power cord connector
ASUS RS700-X7/PS4
Gigabit LAN port 2
The port is for ASUS ASMB6-iKVM controller only.
Gigabit LAN port 1
•
VGA port
The ports for the USB, VGA, and Gigabit LANs do not appear on the rear
panel if the motherboards are not present.
USB ports
LAN port 5*
PS/2 keyboard port
PS/2 mouse port
•
1-5
1.5
System specifications
Model Name
RS700-X7/PS4
1 x Socket LGA2011
Intel® Xeon® E5-2600 Processor Family
Intel® C602-A PCH chipset
√
Processor / System Bus
Core Logic
ASUS Features
Smart Fan
ASWM
Enterprise
√
Total Slots
Capacity
Memory
Memory Type
Memory Size
Expansion Slots
Total PCI/PCI-X/
PCI-E Slots
Slot Type
Additional Slot 1
SATA Controller
Storage
SAS Controller
HDD Bays
I = internal
A or S = hotswappable
12 (4-channel per CPU, 8 DIMM per CPU1,
4 DIMM per CPU2)
Maximum up to 96GB (UDIMM)
Maximum up to 384GB (RDIMM)
Maximum up to 384GB (LRDIMM)
DDR3 800 / 1066 / 1333 / 1600 RDIMM
DDR3 1333 / 1066 ECC UDIMM/Non-ECC
UDIMM
DDR3 1066 / 1333 LR-DIMM
1GB, 2GB, 4GB, 8GB, 16GB, 32GB (RDIMM)
1GB, 2GB, 4GB, 8GB (UDIMM)
8GB, 16GB, 32GB (LRDIMM)
2
1 x PCI-E x16 (Gen3 x8 link) [FH/HL]
1 x PCI-E x8 (Gen3 x8 link) [FH/HL]
1 x PIKE slot for storage enhancement
Intel® C602-A:
2 x SATA 6Gb/s ports
4 x SATA 3Gb/s ports
Intel Rapid Storage Technology (for Windows only)
- Supports software RAID 0, 1, 10 & 5
LSI® Mega RAID (for Windows/Linux)
- Supports software RAID 0, 1, & 10
Optional:
- ASUS PIKE 2008 8-port SAS2 6G RAID card
- ASUS PIKE 2008/IMR 8-port SAS2 6G RAID
card
- ASUS PIKE 2108 8-port SAS2 6G H/W RAID
card
4 x Hot-swap 3.5” SAS/SATA HDD Bays
(continued on the next page)
1-6
Chapter 1: Product introduction
Model Name
Networking
LAN
Graphic
VGA
Auxiliary Storage Device Bay
(Floppy / Optical Device)
Onboard I/O
OS Support
Out of Band
Remote
Hardware
Software
Dimension (HH x WW x DD)
Net Weight Kg (CPU, DRAM &
HDD not inclu ded)
Power Supply
Power Rating
Management
Solution
Environment
RS700-X7/PS4
4 x Intel 82574L + 1 x Mgmt LAN
Aspeed AST2300 16MB
1 x Slim-type optical Device Bay
Options: No Device / DVD-RW
2 x Internal Serial Port
5 x RJ-45 ports (1 for ASMB6-iKVM)
4 x USB 2.0 ports (Front x 2, Rear x 2)
1 x Internal A Type USB Port
1 x VGA port
1 x PS/2 keyboard port
1 x PS/2 mouse port
Windows® Server 2008 R2
Windows® Server 2008 Enterprise 32/64-bit
Windows® Server 2008 R2 Enterprise CentOS
5.6 32/64 bit VMWare ESX4.1/ESXi4.1
RedHat® Enterprise Linux AS5.6/6.0 32/64-bit
SuSE® Linux Enterprise Server 11.2 32/64-bit
(Subject to change without any notice)
Onboard ASMB6-iKVM for KVM-over-IP
ASUS ASWM Enterprise
615mm x 444mm x 43.4mm
15 Kg
600W 80PLUS Gold Single Power Supply
Input: 100–240V, 7.5–3.1A, 50–60Hz, Class I
Operating temperature: 10°C–35°C / Non operating
temperature: -40°C–70°C
Non operating humidity: 20%–90% ( Noncondensing)
* Specifications are subject to change without notice.
ASUS RS700-X7/PS4
1-7
1-8
Chapter 1: Product introduction
This chapter lists the key components
and optional accessories for the server
system.
Components
Chapter 2
1-
2.1
Upgrading CPU and CPU heatsink
The motherboard comes with two surface mount LGA 2011 Socket R designed for
the Intel® Xeon® E5-2600 series processor family.
2
1
5
3
8
4
6
7
Position the CPU over the socket, ensuring that the notch match
the socket.
Tighten the four heatsink screws in a diagonal sequence.
2-2
A
B
B
A
Chapter 2: Components
P/N
Description
90-S000U0C87T E5-2670 2.6G (8C/20M/115W/DDR3 1600/8.00 GT) with Heatsink
90-S000U0C88T E5-2665 2.4G (8C/20M/115W/DDR3 1600/8.00 GT) with Heatsink
90-S000U0C89T E5-2660 2.2G (8C/20M/95W/DDR3 1600/8.00 GT) with Heatsink
90-S000U0C8AT E5-2650 2.0G (8C/20M/95W/DDR3 1600/8.00 GT) with Heatsink
90-S000U0C8BT E5-2640 2.5G (6C/15M/95W/DDR3 1333/7.20GT) with Heatsink
90-S000U0C8CT E5-2630 2.3G (6C/15M/95W/DDR3 1333/7.20GT) with Heatsink
90-S000U0C8DT E5-2620 2.0G (6C/15M/95W/DDR3 1333/7.20GT) with Heatsink
ASUS RS700-X7/PS4
2-3
2.2
Upgrading system memory
The motherboard comes with eight (for CPU1) and four (for CPU2) Double Data
Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets.
12
11
10 9
8 7
6 5
4 3
2 1
1 DIMM_A1
5 DIMM_D2
9 DIMM_E1
2 DIMM_A2
6 DIMM_D1
10 DIMM_F1
3 DIMM_B1
7 DIMM_C2
11 DIMM_G1
4 DIMM_B2
8 DIMM_C1
12 DIMM_H1
Recommended memory configurations
1 CPU Configuration (must on CPU1)
A1
A2
B1
•
1 DIMMs
•
2 DIMMs
•
•
3 DIMMs
•
•
4 DIMMs
•
•
•
5 DIMMs
•
•
•
6 DIMMs
•
•
•
7 DIMMs
•
•
•
8 DIMMs
2 CPU Configuration
A1 A2
•
1 DIMMs
•
2 DIMMs
•
3 DIMMs
•
4 DIMMs
•
5 DIMMs
•
6 DIMMs
•
7 DIMMs
•
8 DIMMs
•
•
9 DIMMs
•
10 DIMMs •
•
11 DIMMs •
•
12 DIMMs •
2-4
B1
•
•
•
•
•
•
•
•
B2
C1
•
•
•
•
•
•
•
•
•
•
•
•
B2
C1
•
•
•
•
•
•
•
•
•
C2
•
•
•
D1
•
•
•
•
•
•
C2
D1
D2
•
•
•
•
•
•
•
•
•
D2
E1
•
•
•
•
•
•
•
•
•
•
•
•
F1
G1
H1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Chapter 2: Components
Order P/N
Description
90-S000I0610T
DDR3 1600 ECC REG 8G 240P
90-S000I0620T
90-S000I0600T
ASUS RS700-X7/PS4
DDR3 1600 ECC REG 16G 240P
DDR3 1600 ECC REG 4G 240P
2-5
2.3
Upgrading hard disk drives
The system supports four hot-swap SATA/SAS hard disk drives and two SATAIII
hard disk drives*. The hard disk drive installed on the drive tray connects to the
motherboard SATA/SAS ports via the SATA/SAS backplane.
We recommend that you install identical drives of the same model and capacity
for RAID configuration.
2-6
Order P/N
Description
90-S000H64R0T
300GB 6G SAS15Krpm with HDD Tray (Single Pack)
90-S000H64S0T
450GB 6G SAS15Krpm with HDD Tray (Single Pack)
90-S000H64T0T
600GB 6G SAS15Krpm with HDD Tray (Single Pack)
90-S000H65D1T
500GB SATA3 6Gb 7200 rpm with HDD Tray (Single Pack)
90-S000H65B1T
1TB SATA3 6Gb 7200 rpm with HDD Tray (Single Pack)
90-S000H65V0T
500GB SATA3 7200 rpm with HDD Tray (Single Pack)
90-S000H65U0T
1TB SATA3 7200 rpm with HDD Tray (Single Pack)
90-S000H65T0T
2TB SATA3 7200 rpm with HDD Tray (Single Pack)
90-S000H65E2T
3TB SATA3 7200 rpm with HDD Tray (Single Pack)
Chapter 2: Components
2.4
Installing ASUS PIKE RAID module
Follow the steps below to install an optional ASUS RAID card on your motherboard.
2
1
3
4
PSA
S1
PSA
S2
PSA
S3
PSA
S4
1.
2.
3.
4.
5.
5
Locate the PIKE RAID card slot on the motherboard, then remove the screw
at the end of the PIKE slot on the motherboard.
Tighten the screw to secure the PIKE card on the motherboard.
Remove the SATA/SAS cables from the onboard SATA1–4 connectors.
Connect the SATA/SAS cables to the onboard SAS1–4 connectors (blue).
Move the SGPIO_SEL1 jumper on the SATA/SAS backplane to 2–3.
Order P/N
90-S00CS0130T
90-S00CS0140T
90-S00CS0150T
ASUS RS700-X7/PS4
Description
PIKE2008 8-port SAS 6G card. RAID Kit (RAID 0, 1, 10, 1E)
PIKE 2008/IMR 8-port SAS 6G card. RAID Kit (RAID 0, 1, 10, 5, 50)
PIKE 2108 8-port SAS 6G card. RAID Kit
(H/W RAID 0, 1, 10, 5, 6, 50, 60)
2-7
2.5
Installing an expansion card to the riser card bracket
The barebone server comes with a riser card bracket. You need to remove the
bracket if you want to install PCI Express x8 or x16 expansion cards.
2
1
3
2-8
Chapter 2: Components
2.6
Installing optical drive
1
2
3
Order P/N
90-S000C2000T
90-S000C4000T
ASUS RS700-X7/PS4
Description
Slim DVD-RW Module (SATA)
Slim DVD-ROM Module (SATA)
2-9
2.7
Friction rail kit
Front end
Rack rails Rear end
1
2
4
3
2-10
P/N
Description
90-S00SP1360T
FRICTION RAIL KIT V2.0
Chapter 2: Components
2.8
OS support list
OS support list
WindowsR Server 2008 R2 Enterprise
WindowsR Server 2008 R2
WindowsR Server 2008 Enterprise 32/64-bit
RedHatR Enterprise Linux AS5.6/6.0 32/64-bit
SuSER Linux Enterprise Server 11.2 32/64-bit
CentOS 5.6 32/64-bit
VMWare ESX4.1/ESXi4.1
* Subject to change without any notice.
P/N
Description
90-S00SW8200T
Windows Server 2008 R2 Enterprise (1-8 CPU, 10CAL)
90-S00SW7151T
ASUS RS700-X7/PS4
WINDOWS SERVER 2008 STD R2 64 (64-bit only)
2-11
2-12
Chapter 2: Components
Download PDF

advertising