- Home
- Home security & automation
- Digital Video Recorders (DVR)
- Acura Embedded
- Power Brick-CV
- User's manual
advertisement
Preface
PowerBrick-CV
User’s Manual
Edition 3.1
Mobile Data Computer
With sssssss
Digital Video Recorder
Copyright
The material in this document is the intellectual property of Acura Embedded Systems Inc. This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of Acura Embedded Systems Inc.
Version 3.1
Warranty
The PowerBrick-CV system is protected by a limited warranty for a period of three (3) years.
Trademark Recognition
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp.
IBM PC is a registered trademark of International
Business Machines Corporation.
Intel, MMX, Pentium, Pentium-II, Pentium-III, Pentium-4,
Celeron are registered trademarks of Intel Corporation.
AWARD is a registered trademark of AWARD
International Inc.
Other product names used in this manual are the properties of their respective owners and are acknowledged.
PowerBrick-CV User’s Manual
Disclaimer Table of Content
Acura Embedded Systems Inc. takes every care in the preparation
1. OVERVIEW…..…………………………………………… 1 of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and
2. INSTALLATION…………………………………………… 2
2.1 CONTENTS OF THE COMPUTER BOX………………. 2 we reserve the right to make changes without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaim any implied
2.2 CONNECTING CABLES AND GETTING STARTED…. 2 warranties of merchantability or fitness for any particular purpose.
The manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes.
2.3
2.4
MOUNTING IN YOUR VEHICLE OR FINAL LOCATION.
MOUNTING TOOLS……………………………………….
4
4
3.1 BIOS SETUP ……………………………………………… 5
In general, the manufacturer will not be liable for loss of data or other direct, indirect, special, incidental or consequential damages arising from the use or inability to use the product or documentation, even if advised of the possibility of such
damages.
3.2
3.3
OPERATING SYSTEMS…………………………………..
OPERATING SYSTEM RESTORE PROCESS ………..
6
6
3.4 WINDOWS XP EMBEDDED, PROFESSIONAL ……… 6
3.5 APPLICATION SOFTWARE…………………………….. 6
3.6 SPECIFICATIONS FOR POWER BRICK-CV. ……….. 7
3.7 OPERATION AND MAINTENANCE…………………….. 8
3.8
3.9
4
WARMING…………………………………………………..
POWER BRICK- CV WIRING DIAGRAM……………….
CONTACT INFORMATION……………………………….
8
9
10
PowerBrick-CV User’s Manual
1. Overview 2. Installation
The PowerBrick-CV is a combined rugged industrial high performance computer and a 4-channel digital video recorder in the same chassis. The system is designed to work in industrial and marine mobile environments, where reliability and endurance with respect to vibration, shock, humidity and temperature are of essence. The PowerBrick-CV system architecture is modular which allows for easy upgrading and expanding.
For public safety providers, the PowerBrick-CV system offers outstanding computing power while at the same time acting as a tool for incident/evidentiary documentation, surveillance and training. Typical areas of application include:
2.1 Contents of the Computer Box
•
•
•
Mobile surveillance, border patrolling, marine patrolling
Law enforcement vessels and vehicles
Patrol boats and vehicles
•
Fire emergency vehicles
•
Public transportation security surveillance/security
Figure2.1: Box major components
In the box you will find the following items: PowerBrick-CV computer, power plug, mounting with rubber suspension, camera cable.
The main features are:
•
Core Duo processor
•
Intel 945GM Chipset
•
4-channel camera input, 120 fps
• Multi-screen video monitoring, allows simultaneous playback of all channels
•
2.5” hard drive
•
1GB DDR2 RAM
•
On-board 10/100/1000 LAN, USB 2.0
•
Standard Audio jacks
•
1 x PCMCIA card bus slot
•
1 x Compact Flash –II slot
• GPS/AVL
•
10-30 Volt DC input
•
Dimensions: 7.60” x 4.35” x 8.15” (W x L x H)
For installation, mounting and cable connections, please see the next
If you have purchased Windows operating system with your computer, the CD should be included. Keep it in a safe place.
Please see your separate monitor packaging for installation and other information for the touch screen monitor.
Do not turn power on until you have read the next section and all cables are connected.
2.2 Connecting Cables and Getting Started
In order to get familiar with your system before mounting it at your vehicle (or final location), we suggest you look at the connections on both ends of the computer such as shown in Figs. 2.2 and 2.3, connect up the unit, and place it into operation.
Section. Technical information is available in Section 2.
Page 2
Page 1
PowerBrick-CV User’s Manual
RS-232 COM port3
TV out
Power Button Camera Input
Main Power
RS-232 COM port1 Ignition control
Ethernet port
VGA port
Audio out
S/PDIF out DC IN
Figure2.2: Front side of PowerBrick-CV.
RS-232 COM port4
USB port
MIC
Compact flash II
Mouse
Connect all applicable cables such as:
PCMCIA
Figure2.3: Back side of PowerBrick-CV.
Keyboard
• Keyboard
• Mouse
• Monitor
•
Power supply cable
After connecting all applicable cables it is safe to power-on the system.
(Warning: use either DC from the dedicated power supply or AC, never both at the same time!).
Optional device cables or units that you provide yourself could include the following:
2.3 . Mounting in your vehicle or final location
This chapter provides you with the information of fixed system mounting.
Prior to that, please prepare the installation tools and appropriate items. If you are not clear about the items, contact your dealer for information. cable
•
Speaker and microphone cables
•
RJ45 Ethernet TP cable
• Serial
Page 3
2.4 . Mounting tools
For mounting your computer in a vehicle you need the following tools:
• Screw
• Drill
Page 4
PowerBrick-CV User’s Manual
3. Technical Information
3.1 BIOS Setup
The PowerBrick-CV uses the Phoenix TrustedCore BIOS which based on the Intel® Core™ Duo, Core 2 Duo, Celeron™ M processors and Intel mobile 945GM Express and ICH7-M chipsets. With high performance and integrated audio and video capabilities. And also it is designed for extended environmental temperature operation up to 70ºC, so it is ideal for use in space-constrained systems and high-temperature environments.
The system BIOS performs a Power On Self Test (POST) upon power on or reset. If problems are encountered during POST, the following may occur:
A warning message is displayed on the primary display device but the boot process continues.
The system is halted when a terminal (fatal) POST error occurs.
Before shutting down the system, however, the error handler will attempt to communicate the cause of the error condition, by writing the error to port 80h, sounding a beep code, and listing the error code on the display.
After POST completes, the system BIOS will search for boot devices in the order configured by the BIOS setup utility and load the operating system from the first boot device found. To activate BIOS setup program, press <F2>key immediately after you turn on the system. Table 3.1 is the
BIOS setup utility menu map.
3.2 Operating Systems
The PowerBrick-CV will generally be provided with a preinstalled operating system such as Windows XP Professional or Embedded. To restore the operating system, follow the procedure outlined in 3.4. You can also use an external CD-ROM drive to change, reinstall or repair the operating system through a USB 2.0 port.
3.3. Operating System Restore Process
1. Back up your existing drive C:\ files.
2. Restart the computer.
3. Hold down the F8 key to enter Windows Advanced Boot Menu options.
4. Select “Return to OS Choices” and press “Enter”.
5. Select “Quick Restore Option”, press “Enter” and follow the instructions.
6. After re-boot, click on “Touch screen” in the “Restore drivers and software” window and follow the instructions.
3.4 Windows XP Embedded
If you want to reinstall Windows XP Embedded, boot the computer, place the CD-ROM labeled “Windows XP Embedded Recovery” into the external
CD-ROM drive, press RESET and follow the instructions on the screen.
We recommend that this be done by experienced computer users only.
Table 3.1: BIOS setup utility menu map
Page 5
You should be able to run all normal/generic application software such as
Microsoft Word, Excel, PowerPoint, Adobe software etc. if you have
Windows installed. See the relevant manual/help guides for the specific software. Acura is not responsible for failure of any software on your computer but if you have any particular software needs please call Acura
Technical Support or e-mail [email protected]
.
Page 6
PowerBrick-CV User’s Manual
3.6 Specifications for PowerBrick-CV
3.7 Operation and maintenance
Table 3.2: System Features
This module requires no routine maintenance. The green LED indicator when lit indicates proper operation and health.
Processor Intel® Core™ Duo supports Hyper Threading
Technology; VRM 10.0 standard
The power supply must be protected by a 15A auto fuse on the input line from the vehicle battery.
Chipset Intel 945GM
System FSB 533/667MHz Front Side Bus
Memory Dual channel DDR2 SDRAM at 400/533/667MHz
3.8 Warning
Video
Audio
Hard Disk
Intel Graphics Media Accelerator 950 integrated
400MHz RAMDAC graphics 256MB
Audio jacks
Two SATA ports (1.5Gbs/s) for hard disks
DVR Module 4-port 120 FPS camera input
640 x 480, 640 x 240, 320 x 240 image resolution
Standard Motion - JPEG compression
LAN
USB 2.0
Hardware
Monitor
Multi-screen monitoring
10/100/1000 Mb Fast Ethernet
Integrated 4 independent OHCI controller supporting
USB 1.1 ports; Integrated 1 EHCI controller supporting USB 2.0 ports; Dynamic connection support to USB 2.0 or USB 1.1 devices
System, processor temperature, voltage and fan speed monitor. Auto Thermal fan speed control
Power
Management
ACPI 3.0 supporting states S0, S3, S4, S5, and C0,
C1, C2, C3, C4
7.60“ x 4.35“x 8.15“
Dimensions
Power 10 – 30 Volt
Before power up the computer, make sure all cables connected to the computer and the monitor.
WARNING:
Fist hookup all cables then turn on computer power swich.Make sure monitor power led on or blinking.
TO COMPUTER TO MONITOR
Table 3.3: Input/Output
15 Pin VGA
TV out
S/PDIF OUT
PS/2 / Keyboard
PS/2 Mouse
Audio jacks
USB 2.0
RJ45 Fast Ethernet
RS232 COM port
12 V DC Power Jack
1
1
1
1
1
1
4
2
2 Option 3
1
Page 7 page 8
PowerBrick-CV User’s Manual
3.9 Power Brick- CV Wiring Diagram
Ignition Controller (Optional) page 9
4.Contact Information
With the unique set of products, Acura Embedded Systems remains committed to its goal of providing trouble-free and customer-friendly service. A special customer service unit has been set up specifically to cater to our esteemed customers' needs.
Technical Support:
• Phone:
1-866-502-9666
• Email: [email protected]
Mail address:
Acura Embedded Systems Inc.
Unit #1, 7711-128th Street
Surrey, BC V3W 4E6
CANADA
Ph: (604) 502-9666 Fax: (604) 502-9668 page 10
PowerBrick-CV User’s Manual
Toll Free 1.866.502.9666
www.acuraembedded.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project