Electro-Voice EVF-1122S/99 Data Sheet

Electro-Voice | EVF-1122S/99

EVF-1122S/99

▪ Coverage Pattern: 90° x 90° Constant Directivity

12-inch Rotatable Waveguide

▪ Passive System: 98 dB Sensitivity, 131 dB Maximum

SPL

▪ System Rating: 500 W Continuous, (2000 W Peak)

▪ PI and FG Version are Standard with Gland Nut and

Stainless Steel Grille

▪ EN54-24 type B certification 1438/CPR/0283 (Only available in select regions)

The Electro-Voice EVF-1122S/99 is a high power, two-way front loaded loudspeaker system that can be used in a variety of applications where high quality sound reinforcement is required in a compact, lightweight package.

For high frequencies, the EVF-1122S/99 utilizes the

ND2B high output 2-inch titanium compression driver, coupled to a rotatable Constant Directivity

90° x 90° waveguide. For low frequencies, the

SMX2121 12-inch woofer was developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep 24-dB per-octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and an HF protection circuit for long term reliability.

The EVF-1122S/99 features make it ideal for many fixed-install applications. The trapezoidal enclosure is constructed out of weather-resistant birch and coated with EVCoat for enhanced durability. For protection against outdoor elements, weatherized versions are available (PI and FG). The enclosure is built with 22

M10 suspension points; 20 for single hang (four (4) shoulder eyebolts included) or cluster arrays (optional

HRK or VRK kits) and two (2) for single hang with a

U-bracket (optional EVF-UB).

The innovative input panel provides Phoenix-style connectors (included in all models) and a dual gland nut cover plate (CDG included in PI and FG models).

For convenience in temporary installation you may add a dual NL4 type connector cover plate (CDNL4). An external easy to access jumper card is provided with each loudspeaker to assist you in the selection of passive (standard shipping configuration) or biamp operation. An available 70.7/100 Volt internal transformer kit (TK-150) may be easily mounted to the input panel for use in distributed systems.

No matter what the application and budget, all these features provide you with the tools to increase flexibility during system design to meet and support your customer’s requirements with fewer items in inventory.

EVF and EVH loudspeakers feature precise acoustics and rigging design for easy to configure vertical and horizontal clusters as part of the solutions provided in the EV innovation family.

2 | EVF-1122S/99

Technical specifications

Frequency Response (-3 dB): 58 Hz – 16 kHz 1

Frequency Range (-10 dB): 49 Hz – 19 kHz 1

Rotatable Coverage: 90° x 90°

Rec. High-pass Frequency: 65 Hz

Passive Crossover Frequency: 1450 Hz

Axial Sensitivity: 98 dB (1W/1m) 1

Max. Calculated SPL: 131 dB 1

Passive Power Handling: 500 W Continuous, 2000 W Peak 2

Impedance: 8 Ω (nominal), 6.0 Ω (min)

Transformer:

Standard 50 Hz BW24 Highpass

70 V

37.5 W

100 V

75 W

Z nom

130 Ω

75 W

150 W

150 W

Do Not Use

65 Ω

33 Ω

Transformer:

89 Hz High-pass per EN54-24

Spectrum

70 V

50 W

100 W

200 W

100 V

100 W

200 W

400 W

Z nom

100 Ω

50 Ω

25 Ω

LF Transducer - SMX2121, 12 in (305 mm) driver

LF Axial Sensitivity: 99 dB (1W/1m) 4

LF Max. Calculated SPL: 131 dB

LF Power Handling: 400 W Continuous, 1600 W Peak

LF Impedance: 8 Ω (nominal), 6.3 Ω (min) 3

HF Transducer - ND2B, 2 in (51 mm) diaphragm compression driver

HF Axial Sensitivity: 110 dB (1W/1m) 4

HF Max. Calculated SPL: 132 dB

HF Power Handling: 40 W Continuous, 160 W Peak

HF Impedance: 8 Ω (nominal), 7.4 Ω (min) 3

Connectors: Dual four pin 10

AWG Phoenix/

EuroBlock Style

Screw Terminal

Enclosure: 13-ply weatherresistant birch with EVCoat

PI/FG versions:

CDG Dual Gland

Nut Input Panel

Cover Included

FG version: 13ply weatherresistant birch with fiberglass finish

Grille: 16 GA power coated galvanneal with, removable logo

PI/FG versions:

Stainless steel with hydrophobic cloth

-

+

-

+

Environmental: IEC 60529 IP55 for PI and FG versions

Suspension: (22) M10 threaded suspension points

(4) shoulder eyebolts and (4) fender washers (included)

Dimensions (H x W x D): 30.26 in x 16.00 in x 16.27 in

(768.6 mm x 406.3 mm x 413.3

mm)

Net Weight: 63.1 lb (28.6 kg)

Shipping Weight: 73.4 lb (33.3 kg)

1. Half-space measurement.

2. EIA RS-426A, tested for eight hours.

3. AES 2-1984, tested for eight hours.

4. Arithmetic averages, 300-1,450 Hz (LF) and

1,450-5,000 Hz (HF).

System overview

Block Diagram (Biamp):

Passive

Limiter

+

ND2B

-

+

-

+

Block Diagram (Passive):

Standard shipping configuration

HPF

LPF

Passive

Limiter

-

+

ND2B

-

+

3 | EVF-1122S/99

Frequency Response and Impedance:

110

100

90

100

80 10

70

50 100 1000

Frequency (Hz)

Passive Mode, Half Space Impedance

10000

3.16

20000

Vertical Off-Axis Frequency Response (Up):

110

100

90

80

70

50 100

Beamwidth:

360

1000

Frequency (Hz)

On Axis

20° Vertical Up

40° Vertical Up

10° Vertical Up

30° Vertical Up

50° Vertical Up

10000 20000

Horizontal

Vertical

100

50

20

20

10

0

20

Horizontal Off-Axis Frequency Response:

110

100

90

80

70

50 100 1000

Frequency (Hz)

On Axis

20° Horizontal

40° Horizontal

10° Horizontal

30° Horizontal

50° Horizontal

10000 20000

Vertical Off-Axis Frequency Response (Down):

110

100

90

80

70

50 100

Directivity:

30

On Axis

20° Vertical Down

40° Vertical Down

1000

Frequency (Hz)

10° Vertical Down

30° Vertical Down

50° Vertical Down

10000 20000

1000

100 1000

Frequency (Hz)

100

10

10000

1

20000

3.6

20 100 10000 20000 1000

Frequency (Hz)

!

Caution!

This Electro-Voice loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the

User’s Manual and possible manual update notices. This system should be suspended with certified rigging hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances.

4 | EVF-1122S/99

Horizontal and Vertical Polar Response (Passive):

Polar plots (1/3 octave)

5 | EVF-1122S/99

Dimension Drawing:

Notice!

Acoustic measurement reference axis is 16 in

(40.64 cm) up from the bottom and centered horizontally on the grille.

EVF-1122S/64

EVF-1122S/66

EVF-1122S/94

EVF-1122S/96

EVF-1122S/126

EVF-1152S/43

EVF-1152S/64

EVF-1152S/66

EVF-1152S/94

EVF-1152S/96

EVF-1152S/99

EVF-1121S

EVF-2121S

EVF-1151S

EVF-2151D

EVF-1181S

CPS2.12

CPS4.5

Compatible System Solutions:

60° x 40° Coverage

60° x 60° Coverage

90° x 40° Coverage

90° x 60° Coverage

120° x 60° Coverage

40° x 30° Coverage

60° x 40° Coverage

60° x 60° Coverage

90° x 40° Coverage

90° x 60° Coverage

90° x 90° Coverage

12” Bass Element

2 x 12” Bass Element

15” Bass Element

2 x 15” Bass Element

18” Bass Element

CPS2.12 Power Amplifier 5

CPS4.5 Power Amplifier 5

CPS4.10

CPS4.10 Power Amplifier 5

5. Contact your sales representative for voltage information.

Certifications and approvals

Sachsenring 60, 94315 Straubing, Germany

1438-CPR-0283

Year of affixing the CE-Mark: 2013

EN 54-24:2008

Voice alarm Loudspeakers for fire detection and fire alarm systems for buildings

Loudspeakers type: EVF-1122S/64, EVF-1122S/66, EVF-1122S/94,

EVF-1122S/96, EVF-1122S/99, EVF-1122S/126

(BLK, WHT, PIB, PIW)

EN54-24 type B certification 1438/CPR/0283 (Only available in select regions)

Ordering information

EVF-1122S/99-BLK

EVF 12" / 2-way Full-range Systems; SMX woofer &

ND2B driver (500 W cont.) 90° x 90°, EVCoat, black

Order number EVF1122S99BLB

EVF-1122S/99-WHT

EVF 12" / 2-way Full-range Systems; SMX woofer &

ND2B driver (500 W cont.) 90° x 90°, EVCoat, white

Order number EVF1122S99WHLB

EVF-1122S/99-PIB

EVF 12" / 2-way Full-range Systems; SMX woofer &

ND2B driver (500 W cont.) 90° x 90°, EVCoat, PIweatherized, black

Order number EVF1122S99PBLB

6 | EVF-1122S/99

EVF-1122S/99-PIW

EVF 12" / 2-way Full-range Systems; SMX woofer &

ND2B driver (500 W cont.) 90° x 90°, EVCoat, PIweatherized, white

Order number EVF1122S99PWLB

EVF-1122S/99-FGB

EVF 12" / 2-way Full-range Systems; SMX woofer &

ND2B driver (500 W cont.) 90° x 90°, EVCoat, fiberglass, black

Order number EVF1122S99FBLB

EVF-1122S/99-FGW

EVF 12" / 2-way Full-range Systems; SMX woofer &

ND2B driver (500 W cont.) 90° x 90°, EVCoat, fiberglass, white

Order number EVF1122S99FWLB

EVF-1122S/99-BLK

EVF 12" / 2-way Full-range Systems; SMX woofer &

ND2B driver (500 W cont.) 90° x 90°, EVCoat, black —

EN54-24 certified

Order number EVF1122S99BLKE

EVF-1122S/99-WHT

EVF 12" / 2-way Full-range Systems; SMX woofer &

ND2B driver (500 W cont.) 90° x 90°, EVCoat, white —

EN54-24 certified

Order number EVF1122S99WHTE

EVF-1122S/99-PIB

EVF 12" / 2-way Full-range Systems; SMX woofer &

ND2B driver (500 W cont.) 90° x 90°, EVCoat, PIweatherized, black — EN54-24 certified

Order number EVF1122S99PIBE

EVF-1122S/99-PIW

EVF 12" / 2-way Full-range Systems; SMX woofer &

ND2B driver (500 W cont.) 90° x 90°, EVCoat, PIweatherized, white — EN54-24 certified

Order number EVF1122S99PIWE

Accessories

CSG

Single gland nut cover kit for EVA, EVF & EVH

Order number CSG-LB

CDG

Dual gland nut cover kit for EVA, EVF & EVH

Order number CDG-LB

CDNL4

Dual NL4 cover kit for EVA, EVF & EVH

Order number CDNL4-LB

TK-150

Transformer kit for EVF & EVH, 150W / 70V

Order number TK-150

Black EVF U Bracket

Mounting bracket for EVF. black

Order number EVF-UB-BLK-LB

White EVF U Bracket

Mounting bracket for EVF. white

Order number EVF-UB-WHT-LB

HRK-1B

Horizontal rigging kit for EVF, black

Order number HRK-1B-LB

HRK-1W

Horizontal rigging kit for EVF, white

Order number HRK-1W-LB

HRK-2B

Horizontal rigging kit for EVF & EVH full-range to EVF sub, black

Order number HRK-2B-LB

HRK-2W

Horizontal rigging kit for EVF & EVH full-range to EVF sub, white

Order number HRK-2W-LB

VRK-1B

Vertical rigging kit for EVF, black

Order number VRK-1B-LB

VRK-1W

Vertical rigging kit for EVF, white

Order number VRK-1W-LB

VRK-2B

Vertical rigging kit for EVF & EVH full-range to EVF subs, black

Order number VRK-2B-LB

VRK-2W

Vertical rigging kit for EVF & EVH full-range to EVF subs, white

Order number VRK-2W-LB

7 | EVF-1122S/99

Represented by:

Germany:

Bosch Sicherheitssysteme GmbH

Robert-Bosch-Ring 5

85630 Grasbrunn

Germany www.electrovoice.com

Bosch Security Systems, Inc.

12000 Portland Avenue South

Burnsville MN 55337

USA

© Bosch Security Systems 2014 | Data subject to change without notice

Document Number F.01U.290.871 | Vs09 | 19. Dec 2014