ev_xld_291_doc
XLD291
3-Way, High-Output,
Very Compact
Line-Array Element
Key Features:
•
•
•
•
•
•
•
•
Very Compact, Lightweight
CCTTM (Coverage Control Technology)
Simple, Quick Integrated Rigging
90° Horizontal Coverage to 200 Hz
Versatile Subwoofer Integration
Bi-Amp or Tri-Amp Operation
Neodymium Transducers
LAPS Aiming and Flying Software
General Description:
Technical Specifications:
Freq. Response1 (-3 dB): 75 Hz-18 kHz
The XLD291 is a 3 –way design using CCT (Coverage Control
Technology) to control horizontal coverage to 200 Hz. It uses an 8"
neodymium LF transducer, an 8" neodymium LF/MB transducer,
and two neodymium 2" voice coil compression drivers combining
through 2 hydra plane wave generators into a 90° x 10° waveguide.
CCT uses both 8" transducers to provide maximum low frequency
output and operating bandwidth while controlling horizontal beam
width to 200 Hz by using DSP. The XLD291 can be used in tri-amp
mode, or in bi-amp using a sophisticated internal passive network.
Designed for use in arrays of four or more elements, the XLD291
delivers full bandwidth audio with precise, predictable coverage
control. Integrated rigging with hinge points located correctly
between array elements is simple to use and quickly provides
uncompromised line array performance. Groundstacking is easily
done by using EV’s XGS-4 Groundstack Kit for XLVC.
Freq. Range1 (-10 dB): 60 Hz-20 kHz
Max Calculated SPL2 : 144 dB Cont., 150 dB Pk
Horizontal Coverage: 90°
Vertical Coverage: Array Dependant, Software Definable
Rigging: Fully Captive Aluminum, 1° increments,
16 elements with 8 to 1 Safety Factor
LF1 Power Handling: 200W Cont., 800W Peak
LF2 Power Handling: 200W Cont., 800W Peak
HF Power Handling: 80W Cont.,
320W Peak
Biamp LF1/HF Power 200W Cont., 800W Peak
Handling: LF2 - 200W Cont., 800W Peak
Bandpass Freq3: 50 - 250 Hz
LF1 to HF Crossover 1760 Hz
Freq3:
The XLVC family consists of two full-range systems with dual
woofers, two full-range systems with single woofers and a
subwoofer system. The dual-woofer versions include the XLD281
with a 120° horizontal coverage pattern and the XLD291 with a 90°
horizontal coverage pattern. The single-woofer versions include
the XLE181 with a 120° horizontal coverage pattern and the XLE191
with a 90° horizontal coverage pattern. The subwoofer module is
the XS212. Most applications using flown very compact elements
require subwoofers integrated into the same array as the full range
systems. XLVC provides three methods to conveniently do this.
The XS212 sub woofer module can be directly arrayed above, or
below XLD291 full range systems. Where vertical space is limited
sub woofer arrays can be created and flown behind the XLD291
full range array using an additional grid and EV’s CBEAM (Coupler
Beam). LAPS modeling software quickly provides array
configurations and rigging information. Using the AGCD Adapter
Grid, XLD cabinets can also be flown or groundstacked with the
XLC215 dual 15-inch subwoofer.
XLVC delivers unprecedented performance in applications ranging
from live reinforcement to performing arts venues, to houses of
worship.
LF1 Passband: 1 x 8" DVN2080, 16 ohms
Recommended Amplifier: EV CP3000S
LF2 Passband: 1 x 8" DVN2080, 16 ohms,
Recommended Amplifier: EV CP3000S
HF Passband: 2 x ND2S-8, 16 ohms
Recommended Amplifier: EV CP3000S
Biamp LF1/HF Passband: 16 ohms,
Recommended Amplifier: EV CP3000S
Connectors: 2 x NL8
Enclosure Material: Birch plywood w/EVCoatTM
Grille: Zinc plated steel with powdercoat paint
Environmental Spec: IEC 529 IP24, MIL 810
Dim (HxWxD): 9.90" x 28.58" x 14.52"
(251 x 726 x 369 mm)
Net Weight: 48 lbs (21.8 kg)
Shipping Weight: 51 lbs (23.1 kg)
1
Full Space Measurement of 4 Elements.
2
Full Space Measurement of HF Section of 4 Elements. SPL Adjusted for 1m Distance.
Use EV or KT Signal Processing or Download Presets from Electro-Voice Website.
3
BlockDiagram:
Beamwidth:
-6dB Beamwidth (degrees)
360
100
20
3.6
20
100
1000
10000
20000
Frequency (Hz)
Impedance:
Connection Chart
(Pins 1 Pass Through)
LF2: Pins 2
Biamp
LF2: Pins 2
LF1: Pins 3
LF/HF: Pins 3
HF: Pins 4
Pins 4 Pass Through
GridDrawing:
HF
100
LF1 & LF2
50
Impedance (Ohms)
Triamp
200
20
10
5
2
1
20
50
100
Frequency (Hz)
1000
10000
20000
Performance Match:
DimensionDrawings(inches/metric):
•
•
•
•
•
•
•
•
•
•
•
•
•
XLD281 - 120° Full-Range Line Array Element
XS212 - Dual 12” Side-Firing Line Array Bass Element
XLC215 - Dual 15” Line Array Bass Element (Requires AGCD)
CP3000S - Precision SeriesTM Power Amplifier
P3000RL - Precision SeriesTM Remote Control Power Amplifier
P1200RL - Precision SeriesTM Remote Control Power Amplifier
Dx38 - Digital Sound System Controller
DN9848 - Digital Sound Controller
XLD/XS Dolly - 4-Tall Bottom Dolly for Rigging and Transporting
XLD Grid - Grid for Hanging XLD or XS212 Line-Arrays
AGCD - XLC to XLD Series Adapter Grid
CBEAM - Coupler Beam for XLD/XLE to XS212 Arrays
XGS-4 - Groundstack Kit for XLVC Line-Arrays
XLD291 Part Numbers:
•
•
XLD291 (Black) - PRD000100-001
XLD291 (White) - PRD000100-002
Top
Front
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 6/2007
Part Number LIT000115 Rev 1
Side
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising