Catalogue Sheet: RXL33F Series

Catalogue Sheet: RXL33F Series
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
The Ready-Lite® RXL33F Series combines a low-profile modular design with state-of-the-art technology and
ease of installation. Elegantly discreet, these Exit Signs complement interior designs while providing mounting
versatility and energy efficiency.
Supply and install the Ready-Lite® RXL33F Series LED low-profile recessed Edge-Lit Exit Sign. The unit shall
operate with universal two-wire AC input voltage from 120VAC to 347VAC at less than 1.5W and universal
two-wire DC input voltage from 6VDC to 24VDC at less than 1.5W for single and double face legends. The
housing assembly shall be of rugged 20-gauge steel and shall include a bar hanger kit for easy installation. The
trim plate shall be low-profile and manufactured of formed steel with a textured finish and _____ colour. The
light source shall be eight (8) long-life LEDs installed on a PCB strip. Red LED technology shall be ALINGAP.
The whole electrical circuit shall be contained in a plastic housing fixed on the trim plate. The acrylic panel
shall have a curved contour. The legend shall have 6” high, 3/4” stroke red letters on a clear background,
unless otherwise specified. The unit shall be equipped with stick-on translucent directional indicators, to be
installed in the field as required by the Code.
The Exit Sign in a Self-powered configuration shall be equipped with sealed Nickel-Cadmium batteries and
will provide a minimum of 90 minutes of emergency illumination upon AC failure.
The equipment shall be CSA-C860 and NRCAN/C860-01 approved CSA22.2 No. 141-10
The equipment shall be Ready-Lite® Model:
.
DIMENSIONS
Dimensions are approximate and subject to change.
16” [40.6 cm]
4-1/4” [10.8 cm]
7-1/8” [18.09 cm]
3-3/8” [8.5 cm]
3-3/8” [8.5 cm]
7” [17.7 cm]
15-1/8” [38.3 cm]
11-3/4” [29.7 cm]
POWER CONSUMPTION
MODEL
AC SPECS
RXL33F SERIES
Low-Profile Recessed
Edge-Lit Exit Sign
FEATURES
• Rugged, 20-gauge steel back box
• Equipped with bar hanger kit for easy
installation
• Formed steel flat trim plate
• Choice of finishes: textured aluminum
or off-white
• Acrylic panel with curved contour
provides superior clarity and illumination
• Legend with 6” letters and easy to
add-on directional chevrons
• Choice of legend background: clear,
white or mirror
• Simple, two-wire universal AC input
(120V to 347VAC 50/60Hz) prevents
installation errors
• Simple, two-wire universal DC input:
6V to 24VDC
• Long-life LED light source of ALINGAP
technology assures low maintenance
costs
• Energy-efficient power consumption:
less than 1.5W in AC or DC mode
• Self-powered models provide 90
minutes of emergency illumination
• Meets or exceeds CSA22.2 No. 141-10
DC SPECS
AC-only
120 to 347VAC
less than 1.5W
-
AC/DC-remote
120 to 347VAC
less than 1.5W
6 to 24VDC
less than 1.5W
self-powered
120 to 347VAC
less than 2.5W
nickel-cadmium battery
min. 90 minutes
ORDERING INFORMATION
SERIES / FACES
RXL3301F= single face
RXL3302F= double face
HOUSING COLOUR
TA= textured aluminum
OW= off-white
PANEL COLOURS
-RC= red/clear*
-RW= red/white
-RM= red/mirror
-GC= green/clear*
-GM= green/mirror
*Single face only.
E X A M P L E : R X L 3 3 0 1 F TA - R C - D C
21
VOLTAGE
-AC= 120 to 347VAC only
-DC= 120 to 347VAC, 6 to 24VDC
-SP= self-powered, 120 to 347VAC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement