Pantheon AS450 Owner Manual
Pantheon AS600 is a high-performance salamander grill designed to meet the demands of professional kitchens. With its powerful 4000W heating element and adjustable temperature range from 50 to 300 degrees Celsius, the AS600 can quickly and evenly cook a variety of foods, from delicate pastries to hearty meats. The adjustable height allows for precise control over the cooking process, ensuring optimal results for different types of food. The stainless steel construction ensures durability and easy cleaning, making the AS600 a reliable and convenient addition to any commercial kitchen.
advertisement
Adjustable Salamander Grill
AS450 & AS600 Operating Manual
Introduction
Thank you for purchasing a Pantheon Catering Equipment product. In this booklet you will find instructions for safe operation so please read carefully and retain for future reference.
Warnings and Precautions
The following warnings and precautions are important and must be observed:
• Ensure voltage and frequency power requirements for the salamander grill match that of the supply.
• The machine must be earthed when used. There is a danger of electric shock if it is not earthed.
• In case of emergency, please turn off the power switch and unplug the machine.
• If the electric wire becomes damaged, a qualified engineer or the manufacturer must replace it.
Pantheon Catering Equipment is not responsible for any accidents or faults caused by amendments made to the machine or improper use by the user.
Technical Data
Specifications:
Model:
Voltage (V)
AS450
220-240V 50Hz
AS600
220-240V 50Hz
Power (W)
Temp. Range ( ̊̊̊̊C)
Weight (Kg)
2800
50-300
39
140
4000
50-300
49
140 Max Adjustable
Height (mm)
Heating Zone (mm) 440 x 320 590 x 320
Dimensions (mm) 450w x 450d x 500h 600w x 450d x 500h
Installation
The installation of the unit must be performed by a qualified technician only.
Place the device on top of a solid, even, safe and stable surface that tolerates the weight of the unit.
Ensure no flammable products are placed near the unit, as it will get hot.
Position the device appropriately so that the plug is always accessible. Also ensure the unit isn’t placed close to any water.
Operating Instructions
AS450:
1.
Plug in the salamander into the mains and green indicator will illuminate to show that the power is connected.
2.
Rotate the temperature controller clockwise and set the required temperature
3.
The yellow light will then illuminate to show the salamander grill element is active and the temperature is rising.
4.
Raise the top adjustable part of the salamander; insert the food you wish to cook.
5.
After placing the food inside, pull the top of the salamander downwards to the required height, dependent on the type and size of the food you wish to cook.
6.
When temperature reaches the set temperature on the temperature controller knob, the yellow light will turn off, to show the grill is at the correct heat.
7.
The salamander will automatically maintain the set temperature, each time the element is heating up to the required temperature, the yellow light will illuminate.
8.
When the food is cooked, simply lift the top adjustable part of the salamander and remove the food.
9.
After you have finished with the salamander turn the temperature controls to off and unplug the machine.
AS600:
1.
Plug in the salamander into the mains and green indicator will illuminate to show that the power is connected.
2.
Rotate the temperature controller clockwise and set the required temperature
3.
The yellow light will then illuminate to show the salamander grill element is active and the temperature is rising.
4.
Raise the top adjustable part of the salamander; insert the food you wish to cook.
5.
After placing the food inside, pull the top of the salamander downwards to the required height, dependent on the type and size of the food you wish to cook.
6.
When temperature reaches the set temperature on the temperature controller knob, the yellow light will turn off, to show the grill is at the correct heat.
7.
The salamander will automatically maintain the set temperature, each time the element is heating up to the required temperature, the yellow light will illuminate.
8.
When the food is cooked, simply lift the top adjustable part of the salamander and remove the food.
9.
After you have finished with the salamander turn the temperature controls to off and unplug the machine.
Maintenance
Cleaning:
Before cleaning always be sure to turn the machine off and unplug it from the mains.
The stainless drop plate and drop net can be taken out to clean with water and non-corrosive cleaner.
Ensure the components are fully rinsed and dry before placing back onto the product.
Circuit Diagrams
AS450
L
AC 230V
HL1
L
N
E
AS600
AC 230V
N
E
HL1
HL3
ST
ST1
ST2
EH
HL2
HL2
EH1
EH2
HL4
Parts Diagrams
AS450
8
9
10
11
12
13
14
15
16
4
5
6
7
S/N
1
2
3
Description
Bottom trunk
Bottom board
Hexagon head screw
Rubber foot
Crosshead screw
Heating indicator
Crosshead screw
Temperature controller
Power indicator
Oil receive tray
Stainless drop net
Crosshead screw
Layering of electric heating tube
Electric heating tube
Front insulation board
Crosshead screw
1
1
2
1
1
1
1
10
2
4
10
1
2
Qty
1
1
4
Remark
With four hexagon nuts
With flat pad head
Insert type
With knob sets
Insert type
34
35
36
37
30
31
32
33
38
39
40
41
42
43
44
25
26
27
28
29
45
46
17
18
19
20
21
22
23
24
Elevating handle
Top trunk
Head insulated cotton
Insulation cotton board
Top casing cover
Crosshead screw
Crosshead screw
Hexagon screw
Hexagon nut
Crown board
Back trunk
Chute
Bearing base
Crosshead screw
Back board
Crosshead screw
Small chain wheel
Small bearing
Support board
Chained board
Stainless screw
Chain
Crosshead screw
Stainless screw
Balancing piece
Sprocket bearing
Sheath of power cord
Power cord
Grounding screw
Copper nut
4
2
1
4
2
8
8
16
1
10
4
1
2
1
1
12
2
1
2
4
1
2
1
1
0.5kg
1
1
4
4
6
With flat pad head
With flat pad head
With a spring pad and a flat pad head
With flat pad head
With four M3 nuts
With eight M3 nuts
Use rubber screw pressed wire
With plug by require
With two spring pad and two flat pad head
AS600
12
13
14
15
8
9
10
11
16
17
4
5
6
7
S/N
1
2
3
Description
Bottom trunk
Bottom board
Hexagon head screw
Rubber foot
Crosshead screw
Heating indicator
Crosshead screw
Temperature controller
Power indicator
Oil receive tray
Stainless drop net
Crosshead screw
Layering of electric heating tube
Electric heating tube
Front insulation board
Crosshead screw
Elevating handle
16
4
2
1
2
2
1
1
2
1
4
10
2
4
Qty
1
1
4
Remark
With four hexagon nuts
Flat head
Insert type
With a knob set
Insert type
35
36
37
38
39
40
41
31
32
33
34
25
26
27
28
29
30
42
43
44
45
46
18
19
20
21
22
23
24
Top trunk
Head insulated cotton
Insulation cotton board
Top casing cover
Crosshead screw
Crosshead screw
Hexagon screw
Hexagon nut
Crown board
Back trunk
Chute
Bearing base
Crosshead screw
Back board
Crosshead screw
Small chain wheel
Small bearing
Support board
Chained board
Stainless screw
Chain
Crosshead screw
Stainless screw
Balancing piece
Sprocket bearing
Sheath of power cord
Power cord
Grounding screw
Copper nut
2
1
4
2
8
8
1
2
1
1
1
10
4
4
12
2
1
2
4
16
1
2
1
0.7kg
1
1
4
4
6
With flat pad head
With flat pad head
With a spring pad and a flat pad head
With flat pad head
With four M3 nuts
With eight M3 nuts
With two spring pad and two flat pad head
advertisement
Related manuals
advertisement