Before You Start:

• Make sure you have a router and high-speed

Internet access (not included).

b c a

1A

iPhone

Install the free Lorex ECO Stratus app from the App Store.

Tap the Lorex ECO Stratus icon to open the app.

Tap Device Manager.

d

Tap .

e

Configure the following:

EXAMPLE

1

2

Name: Enter a name for your DVR of your choice.

Device ID: Press the QR code icon ( ) next to

Device ID and line up the QR code on the top of the DVR using the camera on your device.

1

2

3 Device ID: xxxxxxxxxxx

3

4

5

OR if your device does not have a camera, manually enter the Device ID printed on the label.

Client Port: Enter the Client Port

(default: 9000).

User Name: Enter the DVR’s User Name

(default: admin).

Password: Enter the DVR’s Password

(default: 000000).

4

5 f Tap Save. You will be prompted to change the DVR password. Tap OK.

g Enter a new 6 character password and tap Done. This password will be used to connect to your system from now on.

h Tap Save again to connect to the DVR. The app opens in Live

View and streams video from all connected cameras.

Quick Mobile Guide

• Connect your DVR to your router using an Ethernet cable

(see the Quick Connection

Guide for details).

• Upgrade your DVR firmware and client software or mobile app to the latest versions. b c a

1B

iPad

Install the free Lorex ECO Stratus HD app from the App Store.

Tap the Lorex ECO Stratus HD icon to open the app.

Tap .

d

Tap .

EXAMPLE

e

Configure the following:

EXAMPLE

1

2

3

4

5

1

2

Name: Enter a name for your DVR of your choice.

Device ID: Press the QR code icon ( next to Device ID and line up the QR code on the top of the DVR using the camera on your device.

)

OR if your device does not have a camera, manually enter the Device ID printed on the label.

3

4

5

Client Port: Enter the Client Port

(default: 9000).

User Name: Enter the DVR’s User Name

(default: admin).

Password: Enter the DVR’s Password

(default: 000000).

g f Tap Save. You will be prompted to change the DVR password. Tap OK.

Enter a new 6 character password and tap Done. This password will be used to connect to your system from now on.

h Tap Save again to connect to the DVR. The app opens in Live

View and streams video from all connected cameras.

3 Minutes

• Please note that an upload speed of

1Mbps is recommended for the best video performance. Up to 3 devices may connect to the system at the same time.

C O N N E C T I V I T Y

SETUP IN UNDER

3

MINUTES h g f a b c

1C

Android

Install the free Lorex ECO Stratus app from the Google Play Store.

Tap the Lorex ECO Stratus icon to open the app.

Tap Device Manager.

d Tap Add.

e

Configure the following:

1

2

Name: Enter a name for your DVR of your choice.

DeviceID: Press the QR code icon ( ) next to

Device ID and line up the QR code on the top of the DVR using the camera on your device.

1

Device ID: xxxxxxxxxxx

2

EXAMPLE

3

4

5

OR if your device does not have a camera, manually enter the Device ID printed on the label.

Client Port: Enter the Client Port

(default: 9000).

User Name: Enter the DVR’s User Name

(default: admin).

3

4

5

Password: Enter the DVR’s Password

(default: 000000).

Tap Save. You will be prompted to change the DVR password. Tap Confirm.

Enter a new 6 character password and tap Save. This password will be used to connect to your system from now on.

Tap Save again to connect to the DVR. The app opens in Live

View and streams video from all connected cameras.

LH041 Series Congratulations! You can now view video from your cameras on your smartphone or tablet.

LH041_SERIES_QNG_EN_R1

Device ID: xxxxxxxxxxx

Quick PC/MAC Guide

2

Find your Device ID

The Device ID is printed on a label on the side panel of the DVR.

Record your information below:

DEVICE ID:

NOTE: PC/Mac setup is not required to connect on a smartphone or tablet.

See reverse for smartphone/tablet setup.

15 Minutes c a

3

PC Users

Download the Client Software for PC from www.lorextechnology.com

.

b Once installation is finished, double-click the Lorex Stratus

Client 1 icon ( ) on the desktop. The DVR login appears.

Enter the following information:

1

2

1

2

3

4

5

• • • • • •

3

4

5

Select Device ID

Enter the DVR’s

Device ID

Enter the DVR’s

user name

(default: admin)

Enter the DVR’s password

(default: 000000)

Enter the Client Port

(default: 9000) d Click Login. If this is the first time connecting to your system, you will be prompted to change the password. Enter a new 6 character password and click OK.

e Enter the new password in the login screen and click Login to connect to the DVR. The Client Software connects to your DVR and streams live video from your cameras.

Congratulations! You can now connect over the Internet to view and playback video on your PC.

Quick

Reference

Default access information:

• Default user name: admin

• Default password: 000000

See the label on the side panel of your DVR for your

Device ID.

Default system ports:

• HTTP Port: 80

• Client Port: 9000

If you have forgotten your password, contact

Lorex technical support.

Need Help?

Visit www.lorextechnology.com

It’s all on the Web

Product Information Specification Sheets

User Manuals Software Upgrades

Quick Start Guides Firmware Upgrades

www.lorextechnology.com

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Corporation and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2015 LOREX. All rights reserved.

LH041_SERIES_QNG_EN_R1

OR

d e a b c

Mac Users

Visit www.lorextechnology.com and download the

Client Software for Mac.

Extract the installer file and double-click it to install.

Open Safari, then click Safari Quit Safari.

This resets Safari to complete the installation.

Open the Lorex Stratus Client 1

Applications list.

( ) from the

3

4

5

1

2

Enter the following information:

1

2

• • • • • •

3

4

5

Select Device ID

Enter the DVR’s

Device ID

Enter the DVR’s

user name

(default: admin)

Enter the DVR’s password

(default: 000000)

Enter the Client Port

(default: 9000) g h

Click Login. If this is the first time connecting to your system, you will be prompted to change the password. Enter a new 6 character password and click OK.

Enter the new password in the login screen and click Login to connect to the DVR.

Congratulations! You can now connect over the Internet to view and playback video on your Mac computer.