» Manual Balance Valve Technical Documentation

» Manual Balance Valve Technical Documentation
Manual Balance Valve
Integrated Manual Balancing Valve/Union/Isolation Valve
Application
Manual air vent
P/T port
The Manual Balance Valve combines the features of an isolation valve, union, and pressure/
temperature readout ports, along with the added value of a low-loss, high-signal venturi
readout device into a single unit. The addition of the venturi makes this product perfect for
readout and setting flow of individual circuits accurate to +/- 2%. Also, the forged brass
body of the Manual Balance Valve is favored by Engineers because it ensures reliable,
leak-free performance.
Tail piece side
Body side
The Manual Balance Valve greatly simplifies the Contractor’s job by eliminating up to ten
piping connections, thus saving time, money, and potential leak points. Finally, the Manual
Balance Valve is available with female NPT, male NPT, or SWT, single and double nominal
size reducer tailpiece connections making tough piping jobs a snap.
Shut off handle
• All Manual Balance Valves come with a manual air vent.
Technical Data
Service
Sizes
Materials:
Body
Ball
Stem
Union
Tailpiece
Gland nut
Lever handle
Lever nut
Seals & packing
O-rings
Venturi
Readout port body & cap
Readout port seal
Memory stop
Media temp. range
Leakage
chilled or hot water, 60% glycol
½”, ¾”, 1, 1¹/₄”, 1½”, 2”
Tailpiece end
Body end with one size reduction
forged brass
chrome plated/forged brass
extruded brass
forged brass
forged brass
extruded brass
Dacromet coated steel with PVC grip
Dacromet coated steel
Virgin PTFE
Viton
extruded brass
extruded brass
Nordel
forged brass
0°F to 212°F [-18°C to +100°C]
0%
Body end with two size reductions
D
E
C
B
A
female NPT ½” thru 2”
copper SWT ½” thru 2”
male NPT ½” thru 2”
female NPT ¾” thru 2”
copper SWT ¾” thru 2”
female NPT 1” thru 2”
copper SWT 1” thru 2”
Part Number
PPL1111 ½” female NPT with manual vent and P/T port (1.75 GPM) Venturi 4
PPL1112 ½” female NPT with manual vent and P/T port (3.50 GPM) Venturi 6
PPL1113 ½” female NPT with manual vent and P/T port (9.00 GPM) Venturi 9
PPL1211 ½” female NPT sweat with manual vent and P/T port (1.75 GPM) Venturi 4
PPL1212 ½” sweat with manual vent and P/T port (3.50 GPM) Venturi 6
PPL1213 ½” sweat with manual vent and P/T port (9.00 GPM) Venturi 9
PPL2111 ¾” female NPT with manual vent and P/T port (1.75 GPM) Venturi 4
PPL2112 ¾” female NPT with manual vent and P/T port (3.50 GPM) Venturi 6
PPL2113 ¾” female NPT with manual vent and P/T port (9.00 GPM) Venturi 9
PPL2211 ¾” sweat with manual vent and P/T port (1.75 GPM) Venturi 4
PPL2212 ¾” sweat with manual vent and P/T port (3.50 GPM) Venturi 6
PPL2213 ¾” sweat with manual vent and P/T port (9.00 GPM) Venturi 9
PPL3114 1" female NPT with manual vent and P/T port (10.00 GPM) Venturi 10
PPL3115 1" female NPT with manual vent and P/T port (20.00 GPM) Venturi 14.5
PPL3214 1" sweat with manual vent and P/T port (10.00 GPM) Venturi 10
PPL3215 1" sweat with manual vent and P/T port (20.00 GPM) Venturi 14.5
PPL4114 1"-¾” female NPT with manual vent and PT port (10.00 GPM) Venturi 10
PPL4115 1"-¾” female NPT with manual vent and PT port (20.00 GPM) Venturi 14.5
PPL4214 1"-¾” sweat with manual vent and PT port (10.00 GPM) Venturi 10
PPL4215 1"-¾” sweat with manual vent and PT port (20.00 GPM) Venturi 14.5
PPL5111 ¾”-½” female NPT with manual vent and P/T port(1.75 GPM) Venturi 4
PPL5112 ¾”-½” female NPT with manual vent and P/T port(3.50 GPM) Venturi 6
PPL5113 ¾”-½” female NPT with manual vent and P/T port(9.00 GPM) Venturi 9
PPL5211 ¾”-½” sweat with manual vent and P/T port(1.75 GPM) Venturi 4
PPL5212 ¾”-½” sweat with manual vent and P/T port(3.50 GPM) Venturi 6
PPL5213 ¾”-½” sweat with manual vent and P/T port(9.00 GPM) Venturi 9
Note: All reductions are on the tail piece side.
Only standard sizes are shown, consult factory for sizes 1¼” to 2” inch sizes.
Direction of Flow
Dimensions
Valve
Nominal Size
Inches DN [mm]
A
½”
[12.70] 3.39” [86.11]
¾”
[19.05]
3.39” [86.11]
Dimensions Inches [mm]
B
1.22” [30.99]
1.23” [31.24]
C
0.59” [14.99]
0.59” [14.99]
D
2.95” [74.93]
2.95” [74.93]
E
1.57” [39.88]
1.57” [39.88]
1”
[25.40] 3.91” [99.31] 1.53” [38.86] 0.79” [20.07] 3.74” [95.00] 1.93” [49.02]
1¼”
[31.75] 4.65” [118.1] 1.69” [42.93] 0.98” [24.89] 4.72” [119.9] 2.44” [61.98]
1½”
[38.10] 5.04” [128.0] 1.83” [46.48] 1.26” [32.00] 4.72” [119.9] 2.64” [67.06]
5.91” [150.1]
3.29” [83.57]
2”
[50.80] 5.83” [148.1] 2.05” [52.07] 1.58” [40.13]
2
*For calculated press drop across the Manual Balance Valve calculate P = (GPM
)
Cv
rating
is based on
Cv
Venturi size and Cv noted in graph on page 10 (i.e. Venturi 4 has a Cv rating of 1.30)
800-543-9038 USA
10
866-805-7089 CANADA
Custom Option: The Manual Balance Valve is available
in a body side press option for sizes ½” through 2”.
The Manual Balance Valve press greatly simplifies
the Contractor’s job by eliminating up to ten piping
connections, thus saving time, money and potenial leak
points. The Manual Balance Valve press is designed for
direct mechanical connection to ASTM-Type K, L and M
copper tubing in the hard drawn condition.
203-791-8396 LATIN AMERICA
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
Connection Availability
Body end
800-543-9038 USA
866-805-7089 CANADA
.
3/4'' w/ # 4 VENTUR I: 1.30
3/4'' w/ # 6 VENTUR I: 2.65
3/4'' w/ # 7.5 VENTUR I: 3.61
3/4'' w/ # 9 VENTUR I: 7.05
.05
.1
.15
.2 .25
1'' w/ # 10 VENTUR I:
7.05
1'' w/ # 14.5 VENTUR I:
17.6
(C V FAC TORS FOR USE BY ENGINEERS)
1/2'' &
1/2'' &
1/2'' &
1/2'' &
C V OF VALVES :
.5
G PM
1
1.5
Balancer can utilize graph to indicate flow based on Venturi size and ΔP (inches H20).
2''
3''
4''
5''
6''
10''
9''
8''
7''
15''
20''
30''
1 PS I
40''
50''
60''
100''
90''
80''
70''
UR I
4 VE
NT
#
UR I
2 2.5
#6V
E NT
#9V
E NT
UR
# 10
I
VE N
TUR
I
5
10
UR I
15
# 14
. 5 VE
NT
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
20 25
50
Manual Balance Valve Pressure Drop Diagram
va tive hydronic c omponents a nd acc ess ories for the HVA C industry.
Miller Dr. S uite 2 00 W arren, MI 48092 t P hone: 1-800-313-H VA C F ax: 1 -86
203-791-8396 LATIN AMERICA
11
800-543-9038 USA
20"
30"
866-805-7089 CANADA
omponents an d ac ce ss ories for the HVA C industry.
2 00 W ar ren, M I 48 09 2 t P hone: 1 -800 -313 -H VA C
F ax : 1 -8
203-791-8396 LATIN AMERICA
1
2
3
15.0
34.0
20.9
57.0
30.8
57.0
88.0
(CV FACTORS FOR USE BY ENGINEERS)
CV OF VALVES:
1-1/4" w/# 13 VENTURI
1-1/4" w/# 19 VENTURI
1-1/2" w/# 15 VENTURI
1-1/2" w/# 22 VENTURI
2" w/# 18 VENTURI
2” w/# 25 VENTURI
2" w/# 32 VENTURI
3
4
4
5
5
6
6
7
7
8 9 10
8 9 10
#1
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
RI
TU
RI
TU
#1
3V
EN
/4"
GPM
1-1
20
#
20
2"
30
30
40
40
RI
TU
2
#
RI
TU
18
VE
N
RI
TU
/4"
5V
EN
/2"
1-1
Balancer can utilize graph to indicate flow based on Venturi size and ΔP (inches H20).
1"
2"
3"
4"
5"
6"
10"
9"
8"
7"
1ps i
40"
50"
60"
1
#
19
VE
N
#
50
RI
TU
50
25
VE
N
2"
22
VE
N
/2"
1-1
60 70 80 90 100
#3
60 70 80 90 100
2"
RI
TU
2V
EN
12
1-1
100"
90"
80"
70"
Manual Balance Valve Pressure Drop Diagram
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement