Anacont LCK

Anacont LCK
ANALYTICAL INSTRUMENTS
ANALYTICAL INSTRUMENTS
CONDUCTIVITY TRANSMITTERS
■
■
■
■
■
■
Water production
Water processing
Water purification
Wastewater treatment
Pharmaceutical industry
Food and beverage industry
GENERAL DESCRIPTION
TECHNICAL DATA
The AnaCONT 2-wire mini compact conductivity transmitters are designed
to measure the conductivity of a liquid and convert the input signal
to 4-20 mA output. They are suitable for measuring clean, non-crystallising
liquids. The design of the transmitter and its applicability in wide
temperature range allow its operation in diverse industrial applications.
AnaCONT IN SYSTEM
WITH A PC
AnaCONT LCK
mini compact
Type
1 μS/cm – 20 μS/cm
10 μS/cm – 200 μS/cm
100 μS/cm – 2000 μS/cm
Range
Measurement
error
typically 3 % ±1 digit (max. 5%)
12-36 V DC galvanically isolated,
protection against surge transients
Power supply
The instrument with HART output can be connected to a PC using a UNICOMM
HART-USB modem. Max. 15 normal (non Ex) instruments can be connected
to a HART line. Measured values can be visualised and/or the instruments can
be programmed via digital HART communication. Applicable software: EView 2
configuration software or NIVISION process visualization software.
Probe
2-electrodes, built-in
Cell constant
K=0.01; K=0.1; K=1
Analogue
4 - 20 mA
Display
Optional UNICONT PLK-501, external
Digital
communication
Medium temperature
Medium pressure
Ambient temperature
4 - 20 mA + HART
-10 °C … +70 °C (14 °F … +158 °F)
0 - 1.6 MPa (0 - 16 bar g / 0 - 232 psi g)
0 °C … +70 °C (32 °F … +158 °F )
Sealing material
Viton
Ingress protection
Probe: IP 68 / Connector: IP 65
Housing material
1.4571 stainless steel
Probe material
AnaCONT IN SYSTEM WITH
MultiCONT
1.4571 + PP
Electrical connection
Pg9 DIN 43650 connector
Electrical protection
Class III.
The MultiCONT can handle digital data coming from a maximum 15 HART capable transmitters (conductivity, pH, ORP, temperature, level, pressure).
The digital (HART) information is processed, displayed and transmitted via RS485 communication line to a PC when needed. Remote programming of the
transmitters is also possible. Visualisation on PC can be accomplished with NIVISION process visualization software.
Specifications in metric & US units!
OPERATION
PROBE
ORDER CODES
AnaCONT mini compact conductivity transmitters
AnaCONT L C K - 2
Measuring range
Code
I
K= —
A
-
Code Accessories
Proc. connection Code
Output
1
4 - 20 mA
2
2
4 - 20 mA
+ HART
4
1-20 μS/cm (K=0.01)
1
BSP 3/4”
10-200 μS/cm (K=0.1)
2
100-2000 μS/cm (K=1)
3
BSP 1”
(only with K=1 probe)
NIVELCO PROCESS CONTROL CO.
H - 1 0 4 3 B U D A P E S T , D U G O N I C S U . 1 1.
TEL.: (36-1) 889-0100 ▪ FAX: (36-1)889-0200
E-mail: [email protected] http://www.nivelco.com
I = distance between electrodes
A = electrode surface
UNICONT PLK-501-2 plug-in display
UNICONT PLK-501-3 plug-in display with
PNP output
Nivelco reserves the right to change technical data without notice!
Mini compact design
Measuring range: 1 μS/cm - 2000 μS/cm
Application oriented measuring range selection
Optional external plug-in display
4-20 mA, HART communication
IP68 probe
Measurement
data
■
■
■
■
■
■
APPLICATIONS
Output
lck1s14a0602b
MAIN FEATURES
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement