5715

5715
Programmable LED indicator
5715
– 4-digit 14-segment LED display
– Input for mA, V, Ohm, RTD, TC and potentiometer
– 4 relays and analog output
– Universal supply
– Programmable via front keys and PC
Application
• Display for digital readout of current / voltage / resistance /
temperature or 3-wire potentiometer signals.
• Process control with 4 pairs of potential-free change-over
relays and analog output.
• For tank level control, with the possibility of customer
linearization ensuring correct level measurement and control
in non-linear tanks.
Connections
Technical characteristics
• 4-digit LED indicator with 13.8 mm 14-segment characters.
Max. display readout -1999...9999 with programmable
decimal point and relay ON / OFF indication.
• All standard operational parameters can be adjusted to any
application by way of the front function keys. When
programming is carried out by way of a PC and the
configuration program PReset, additional configuration
options are available, such as customer-defined linearization
and special input signals.
• Help texts in eight languages can be selected via a menu
item.
• A menu item allows the user to minimize the installation test
time for the relay outputs by activating / deactivating each
relay independently of the input signal.
Mounting / installation
• To be mounted in panel front. The included rubber packing
must be mounted between the panel cutout hole and the
display front to obtain a protection degree of IP65 (type 4X).
For extra protection in extreme environments, PR5715 can be
delivered with a specially designed splash-proof cover as
accessory.
This page is automatically generated on the basis of information provided on www.prelectronics.com and affiliated websites. It is provided to you as a service and for information
purpose only. While we have attempted to maintain the information as accurately as possible, the page may contain errors or omissions for which we disclaim any and all liability
Environmental Conditions
Specifications range.......................................
Calibration temperature.................................
Relative humidity............................................
Protection degree (mounted
in panel).........................................................
-20°C to +60°C
20...28°C
< 95% RH (non-cond.)
IP65 / Type 4X, UL50E
Mechanical specifications
Dimensions (HxWxD).....................................
Cut out dimensions........................................
Weight approx................................................
Wire size, pin 41-46 (max.)............................
Wire size, others, max...................................
Vibration.........................................................
Vibration: 2...25 Hz........................................
Vibration: 25...100 Hz....................................
48 x 96 x 120 mm
44.5 x 91.5 mm
260 g
1 x 1.5 mm2 stranded wire
1 x 2.5 mm2 stranded wire
IEC 60068-2-6 : 2007
±1.6 mm
±4 g
CJC via internally mounted
sensor............................................................ ±(2.0°C + 0.4°C * Δt)
Δt =................................................................. Internal temperature-ambient
temperature
Sensor error detection................................... Yes
Sensor error current: When
detecting / else............................................... Nom. 2 μA / 0 μA
Current input
Measurement range.......................................
Programmable measurement ranges............
Input resistance..............................................
Sensor error detection...................................
Voltage input
Measurement range....................................... 0...12 VDC
Programmable measurement ranges............ 0/0.2...1; 0/2...10 VDC
Input resistance.............................................. Nom. 10 MΩ
Common specifications
Output specifications
Supply
Supply voltage, universal............................... 21.6...253 VAC, 50...60 Hz or
19.2...300 VDC
Display:
Display readout..............................................
Decimal point.................................................
Digit height.....................................................
Display updating............................................
Input outside input range
is indicated by................................................
Isolation voltage
Isolation voltage, test /
working........................................................... 2.3 kVAC / 250 VAC
Response time
Temperature input (0...90%,
100...10%)...................................................... ≤ 1 s
mA / V input (0...90%, 100...10%).................. ≤ 400 ms
Auxiliary supplies
2-wire supply (pin 46...45).............................. 25...15 VDC / 0...20 mA
Max. power consumption...............................
Max. power consumption...............................
Internal consumption......................................
Internal consumption......................................
Signal / noise ratio.........................................
Accuracy........................................................
3.3 W (5715B)
3.8 W (5715D)
3.0 W (5715B)
3.5 W (5715D)
Min. 60 dB (0...100 kHz)
Better than 0.1% of selected
range
Communications interface............................. USB Loop Link
EMC immunity influence................................ < ±0.5% of readout
Input specifications
RTD input
RTD type........................................................ Pt10, Pt20, Pt50, Pt100,
Pt200, Pt250, Pt300, Pt400,
Pt500, Pt1000 Ni50, Ni100,
Ni120, Ni1000, Cu10, Cu20,
Cu50, Cu100
Cable resistance per wire
(max.)............................................................. 50 Ω
Sensor current............................................... Nom. 0.2 mA
Effect of sensor cable resistance
(3-/4-wire)....................................................... < 0.002 Ω / Ω
Sensor error detection................................... Yes
Short circuit detection.................................... < 15 Ω
Linear resistance input
Linear resistance min....max.......................... 0 Ω...10000 Ω
TC input
Thermocouple type........................................ B, E, J, K, L, N, R, S, T, U,
W3, W5, LR
-1999...9999 (4 digits)
Programmable
13.8 mm
2.2 times / s
Explanatory text
Current output
Signal range................................................... 0...20 mA
Programmable signal ranges......................... 0...20 / 4...20 / 20...0 and
20...4 mA
Load (max.).................................................... 20 mA/800 Ω/16 VDC
Load stability.................................................. ≤0.01% of span / 100 Ω
Sensor error indication................................... 0 / 3.5 / 23 mA / none
NAMUR NE 43 Upscale/Downscale.............. 23 mA / 3.5 mA
Output limitation, on 4...20
and 20...4 mA signals.................................... 3.8...20.5 mA
Output limitation, on 0...20
and 20...0 mA signals.................................... 0...20.5 mA
Current limit.................................................... ≤ 28 mA
Relay output
Relay functions..............................................
Hysteresis......................................................
ON and OFF delay.........................................
Sensor error reaction.....................................
Max. voltage...................................................
Max. current...................................................
Max. AC power..............................................
Max. load at 24 VDC......................................
Setpoint
0...100%
0...3600 s
Break / Make / Hold
250 VRMS
2 AAC
500 VA
1A
Observed authority requirements
EMC............................................................... 2004/108/EC
LVD................................................................ 2006/95/EC
Approvals
EAC................................................................ TR-CU 020/2011
DNV Marine.................................................... Stand. f. Certific. No. 2.4
UL................................................................... UL 508
5715-121815
Potentiometer input
Potentiometer min....max............................... 10 Ω...100 kΩ
0...20 mA
0...20 and 4...20 mA
Nom. 20 Ω + PTC 25 Ω
Loop break 4...20 mA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement