INSTALLATION
SIDE MOUNT LICENSE PLATE MOUNT
CUSTOMER SERVICE
PARTS INCLUDED
1
1
1
1
877.370.3604 (toll free)
Chrome Plate Mount for VTX
M8 x 1.25 x 40mm SHCS Fastener
M8 Flat Washer
Installation Instructions
INSTALLATION QUESTIONS
[email protected]
or call 715.247.2983
LIMITED WARRANTY
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING KϋRYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING
THE USE AND CARE OF THIS PRODUCT.
WARNING!
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING
THE CONTENTS DESCRIBED HEREIN CAN RESULT IN
POTENTIAL DEATH OR SERIOUS INJURY.
ATTENTION! This indication alerts you to the fact that ignoring the contents
described herein may negatively affect product performance and
functionality.
CAUTION!
This indication alerts you to the fact that ignoring the contents
described herein can result in potential injury or material
damage.
TOOLS SUGGESTED
Set of Metric Hex Wrenches, Set of Metric Combination Wrenches
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
STEP 1
3174
Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition.
Küryakyn warrants that any Küryakyn products
sold hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
● Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt
showing the date the customer purchased the
product(s).
●The product must be properly installed,
maintained and operated under
normal conditions.
●Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated
products.
●Küryakyn shall not be liable for any
consequential and incidental damages, including
labor and paint, resulting from failure of a
Küryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
Küryakyn and a customer.
●Küryakyn products are often intended for use in
specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
●Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the
consumer. L.E.D.’S contained in components of
Küryakyn products will be warranted for defects
in materials and workmanship for 3 years from
the date of purchase where as all other
components shall be warranted for one(1) year.
This includes, but is not limited to; control
modules, wiring, chrome & other components.
●Küryakyn makes no warranty of any kind in
regard to other manufacturer¹s products
distributed by Küryakyn. Küryakyn will pass on
all warranties made by the manufacturer and
where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
disposition of the warranty claim lies
with the manufacturer.
ABOUT OUR CATALOG
STEP 2
Remove the OEM lower
shock fastener. PIC 1
For purchasing Küryakyn® products, you
can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with
your address to: Küryakyn, P.O. Box 339,
Somerset, WI 54025.
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
PIC 1
Be sure to ask your local dealer about other
Küryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights
reserved.
REMOVE THIS FASTENER
3174-25MC-1011
-cont.-
STEP 3
Insert the supplied M8 X 1.25 X 40mm Socket Head Cap Screw through the supplied M8 Flat
Washer, through the Side Mount License Plate Holder and through the mount. PIC2 Install the
mount in the location the OEM fastener was removed from in STEP 2.
PIC 2
STEP 4
Adjust the plate to desired position and tighten all fasteners.
WARNING!
THE ADDITION OF A SIDE-MOUNTED LICENSE PLATE MAY AFFECT
CORNERING CLEARANCE IN SOME SITUATIONS.
CAUTION!
Be sure there is adequate clearance between the clamp and the
pulley.
ATTENTION!
It is the installer’s responsibility to ensure that all of the fasteners (including
preassembled) are tightened before operation of the motorcycle. Küryakyn will
not issue a warranty on components lost due to improper installation. Periodic
maintenance may be required.
INSERT M8 FASTENER AND FLAT WASHER AND
INSTALL MOUNT HERE
PAGE
2
Ride On!
SIDE MOUNT PLATE MOUNT
INSTALLATION
">