Front Axle Hub

Front Axle Hub
AH–3
AXLE – FRONT AXLE HUB BOLT
FRONT AXLE HUB BOLT
SUSPENSION & AXLE
AXLE
COMPONENTS
FRONT FLEXIBLE
HOSE BRACKET
29 (296, 21)
15 (155, 11)
* 14 (143, 10)
123 (1,254, 91)
FRONT DISC BRAKE
CALIPER ASSEMBLY
FRONT DISC
FRONT AXLE
HUB BOLT
N*m (kgf*cm, ft*lbf) : Specified torque
AH
Non-reusable part
* For use with SST
C133101E01
AH–4
AXLE – FRONT AXLE HUB BOLT
REMOVAL
1.
REMOVE FRONT WHEEL
2.
DRAIN BRAKE FLUID
NOTICE:
Immediately wash off any brake fluid that comes into
contact with painted surfaces.
3.
REMOVE FRONT DISC BRAKE CALIPER ASSEMBLY
(See page AH-7)
4.
REMOVE FRONT DISC (See page BR-42)
5.
REMOVE FRONT AXLE HUB BOLT
(a) Using SST and a screwdriver or the equivalent to
hold the axle hub, remove the hub bolt.
SST 09650-17011
SST
F044194E01
INSTALLATION
C098706E01
AH
1.
INSTALL FRONT AXLE HUB BOLT
(a) Install the washer and the nut onto a new hub bolt,
as shown in the illustration.
(b) Using a screwdriver or the equivalent to hold the
axle hub, install the hub bolt by tightening the nut.
2.
INSTALL FRONT DISC (See page BR-45)
3.
INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY
(See page AH-11)
4.
INSTALL FRONT WHEEL
Torque: 112 N*m (1,137 kgf*cm, 82 ft.*lbf)
5.
FILL RESERVOIR WITH BRAKE FLUID (See page BR5)
6.
BLEED BRAKE LINE (See page BR-5)
7.
CHECK FLUID LEVEL IN RESERVOIR (See page BR7)
8.
CHECK FOR BRAKE FLUID LEAKAGE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising