PAG l i n k P L 1... G o l d M o u n...

PAG l i n k   P L 1... G o l d   M o u n...
PAGlink PL16 Gold Mount Charger
L I N K E D C H A R G I N G - AN INDUSTRY FIRST
• Features linked battery charging - an industry first developed by PAG.
• Charges simultaneously up to 16 PAGlink Gold Mount batteries
(3-stud, Snap-on) from any discharged state.
• Charge up to 8 batteries overnight on one charger.
• No more midnight battery swapping.
• Fewer chargers required.
• The charge status of each battery is
shown on its individual display.
• A recovery feature helps revive deeply
discharged batteries.
• Compact, robust and lightweight.
• Quiet and cool-running - the ideal location charger.
• Incorporates a 100W camera power supply with XLR4 output.
• Accepts firmware updates via the battery connectors.
I N T E R N AT I O N A L PAT E N T S A P P LY
C H A R G E U P TO 1 6 BAT T E R I E S S I M U LTA N E O U S LY
The PAGlink PL16 Gold Mount Charger is designed to charge PAGlink HC-PL94T batteries from any
discharged state, individually or linked. Up to 16 batteries can be fast-charged simultaneously,
8 linked on each position. After a shoot, simply stack your batteries on the charger, and by the
morning they will all be fully-charged and ready to use again. This means no more midnight battery
swapping. 8 fully-discharged batteries will be fully-charged in approximately 12 hours. The charger
uses the available power efficiently and intelligently to achieve fully-charged batteries safely, and
as quickly as possible.
A GAME-CHANGER FOR CHARGING
The stages of the charging process for each channel are clearly indicated on the charger’s large
backlit LCD screen. The batteries communicate with each other to manage their own charging,
which is fully automatic. The most discharged batteries are given priority. The battery’s state of
charge is displayed on its individual Run-Time & Capacity Display, so that you know at a glance
when batteries are fully-charged and ready to use. The display characters can be inverted, for
legibility, with a single button press. The display reverts automatically after the battery is removed
from the charger. Fully-charged batteries stop accepting charge automatically and independently of
others in the stack. The batteries can be left on the charger to top-up until they are needed.
S P E C I F I C AT I O N
Model No. 9707A
Range of Batteries Charged:
Designed for parallel charging the
following PAGlink batteries, from
any state of charge, individually
or linked:
PAGlink HC-PL94T Model 9306
Suitable for parallel charging the
following PAG Gold Mount Li-Ion
batteries:
PAG L96e Model 9310A
PAG L96T Model 9305A
Battery Connectors:
2 x Gold Mount.
Main Charge Program:
Li-Ion Intelligent Parallel Charging
program: maximum output 6A at
16.8V (100W approx.).
Recovery Charge Program:
If a battery will not accept charge,
and is indicated as ABST on the
charger display, a Recovery Charge
Program can be initiated by two
presses of the front panel button,
which will enable the battery to be
charged. Additionally, the charger
will automatically recover a Li-Ion
battery where the output has been
shut down.
Self Test Program:
The internal microcomputer
constantly monitors the battery
under charge, as well as the
operation of the charger’s own
functions, which will be shut down
to a safe condition should any of the
tests fail.
Output Protection:
Charger protected against short
circuit and excess battery voltage.
Charging Times:
1
2hrs 30mins
AC Mains Failure Protection:
Should mains failure occur during
a charging program, or whilst the
charger is connected, it will shut
down to a safe condition.
2
(1 / 1)
3hrs
4
(2 / 2)
6 hrs
6
(3 / 3)
9 hrs 30 mins
User Interface:
The charge status of each battery
is indicated by its own display.
The different stages of the charging
process are indicated for each
channel on the charger’s LCD screen.
The charger is fully automatic in
operation.
8
(4 / 4)
11 hrs 45 mins
16
(8 / 8)
24 hrs
Safety:
Designed to comply with electrical
safety standard BS EN 60065 and
UL6500. NOTE: U.K. mains leads are
fitted with a 1" fuse to BS1362
rated 5A as standard.
European Union Directives:
Complies with the following EU
Directives:
• EMC Directive 89/336/EU.
• Low Voltage Directive 73/23/EU.
Operating Temperature Range:
0ºC to +40ºC (+32ºF to +104ºF).
Dimensions:
Height: 75mm (3”).
Width: 220mm (8.6”).
Depth: 190mm (7.5”).
These charge times are for PAGlink
HC-PL94T 94 Watt-hour batteries,
from fully-discharged to fullycharged, and are approximate only.
Camera Power Supply:
Suitable for powering cameras that
can accept a 16.8V input.
Operation:
The camera power supply function is
operated by pressing and holding
the Camera PSU button on the
charger’s front panel for 1 second.
Charging is suspended whilst the
power supply is in use.
Output:
16.8V DC. Maximum current 5.5A
(90W).
Output Connector:
XLR4F connector (pin 1 neg.
pin 4 pos).
Weight:
1.4kg (3lbs).
Mains Input:
90V to 265V AC. Frequency 50-60
Hz. Maximum consumption 140W.
© FEB 2015 PAG Ltd. PAG is the trademark of PAG Ltd. All third party trademarks are acknowledged as such.
PAG Ltd.
565 Kingston Road
London SW20 8SA
United KIngdom
E [email protected]
T +44 (0)20 8543 3131
F +44 (0)20 8540 4116
www.paguk.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement