Avid Mojo DX Mojo DX Using Guide

Below you will find brief information for Video Capture Device Mojo Mojo DX. This manual guides you through connecting and using your Avid Mojo DX, a device for capturing and outputting SD and HD video and audio. Learn about site planning, rack mounting, connecting to various devices (cameras, decks, monitors), storage options, and syncing audio/video equipment. The manual covers configurations for Windows and Macintosh systems.

PDF Download
Document
Avid Mojo DX User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Captures and outputs SD and HD video and audio
  • Connects to an Avid editing system via a Host Interface Board
  • Captures SD and HD video material in digital format via SDI connectors
  • Captures audio in digital SPDIF/ADAT and as SDI embedded audio
  • Outputs SD and HD video material in digital format via an SDI connector
  • Outputs audio in SPDIF/ADAT format and as SDI embedded audio

Frequently asked questions

The Avid Mojo DX connects to your workstation via a PCIe cable which ships with the Avid Mojo DX. The PCIe cable connects from the Avid Mojo DX to a PCIe HIB you install in your workstation. See the manufacturer’s documentation provided with your workstation for detailed instructions on installing additional boards and for the location of your workstation’s PCIe slot.

The site you choose for your Avid Mojo DX workstation should meet the following environmental requirements: - Site is clean and dust free. - Site is free from significant temperature or humidity changes. - Site is sturdy, level, and not subject to vibration. - Site is away from radio frequency emissions, high-traffic, or high-noise areas. - Site provides adequate space in front of and behind the workstation components, so you can connect cables and service your workstation. This also provides adequate airflow for cooling. - Site provides a minimum clearance of 3 inches (7.6 cm) for the side and back panels of the deskside base unit. - Site for the editing workstation is a table (or other surface) that is at least 60 inches wide by 48 inches deep (150 cm × 120 cm).

You select synchronization source in the Video Output tool. The two choices are reference or internal. If reference is selected, the Avid Mojo DX locks to either black burst or Tri-level, whichever is connected. If internal is selected, or if there is no black burst or Tri-level connected, the Avid Mojo DX generates its own reference.
ALP:
Preparing document for printing…
0%