Furuno 1964C Operator's Manual
Furuno 1964C is a versatile marine radar system designed to enhance your situational awareness and navigation capabilities on the water. With its advanced features, it provides reliable performance and ease of use for a variety of applications.
Here are some key capabilities of the Furuno 1964C:
- Radar Operation:
- Transmitting and stand-by modes allow you to switch between actively transmitting radar signals and a power-saving stand-by mode.
- Range scale selection lets you adjust the radar range to suit your needs, from close-range to long-range detection.
- Gain adjustment optimizes the radar sensitivity to display clear and detailed radar echoes.
Advertisement
Advertisement
VX2
MODEL1824C/1834C/1934C/1944C/1954C
GD-1920C Operator’s Guide
The purpose of this Operator's Guide is to provide basic operating procedures for this equipment. For more detailed information see the Operator's Manual.
8
A
12
9
10
ABC
1
JKL
4
STU
7
EBL
VRM
DEF
2
MNO
5
VWX
8
_'#
0
GHI
3
PQR
6
YZ&
9
GAIN
1
2
4
3
B
6
5
7
8
9
10
11
12
5
6
3
4
1
2
7
Opens/closes the alarm menu.
Clears data; erases selected mark.
Opens/closes the main menu.
Selects a range.
Enter alphanumeric data.
Radar: Displays the soft keys for adjustment of gain, A/C SEA, A/C RAIN .
Sounder: Adjusts gain.
Press three seconds:Turns power off.
Momentary press: Turns the power on; shows soft keys for adjustment of brilliance and hue; shows RADAR STBY/TX soft key.
Displays the mode selection window.
Momentary press:
Registers own ship’s position as a waypoint.
Press three seconds:
Marks man overboard position.
Shows or hides the soft keys, function keys, nav data.
Displays soft keys for EBL/VRM.
Soft keys
11
Chart drive
A
B
Trackball
Shifts EBL/VRM and cursor; selects menu items and options.
ENTER knob
Push: Registers setting.
Rotate: Adjusts gain, VRM, EBL, etc.; selects menu items and options. May also be used to enter alphanumeric data.
Turning the Power On/Off
Turning on the power
Press the POWER/BRILL key momentarily.
Turning off the power
Press and hold down the POWER/BRILL key until the screen goes off (approx. 3 sec.)
Selecting a Display
selection window. display screen, and then push it. combination display.
<RADAR Operation>
Transmitting, Stand-by
momentarily to show soft keys.
2. Press the RADAR STBY soft key to highlight TX on its label.
3. Press the RETURN soft key.
To return to Stand-by mode, press the
RADAR TX soft key to highlight STBY on its label.
Selecting the Range Scale
Press the RANGE (+ or -) key to change the range scale.
Adjusting the Gain
2. Press the GAIN soft key.
GAIN SENSITIVITY
¤ AUTO ROUGH
¡
¡
AUTO MODERATO
AUTO CALM
¡ MAN 0
2. For A/C SEA, rotate the ENTER knob to select the appropriate setting. When selecting MAN, rotate the ENTER knob to adjust.
3. For A/C RAIN, rotate the ENTER knob to adjust. to finish.
Measuring Range by VRM
VRM1 ON (dotted ring) or VRM2 ON
(dashed ring) soft key to show appropriate VRM.
VRM on the inside edge of a radar target, and read the VRM indication to find range.
To erase a VRM, press appropriate VRM soft key followed by the CLEAR key.
Measuring the Bearing
ROUGH, AUTO MODERATO, AUTO
CALM or MAN (manual) as appropriate.
For manual adjustment, rotate the
ENTER knob to adjust, while observing the radar echo. key to finish.
Adjusting the A/C SEA, RAIN
or A/C RAIN soft key to show the appropriate setting window.
A/C SEA
AUTO ROUGH
AUTO MODERATE
AUTO CALM
MAN 0
A/C SEA window
A/C RAIN
0
A/C RAIN window
1 ON (dotted line) or EBL 2 ON (dashed line) soft key to show the appropriate
EBL. radar target with the EBL, and read the
EBL indication to find bearing.
To erase an EBL, press appropriate EBL soft key followed by the CLEAR key.
EBL1
(Dotted)
VRM2
(Dashed)
VRM1
(Dotted)
EBL2
(Dashed)
12/
H-UP
EBL1 bearing/
VRM1 range
EBL1
330.1
°
R
VRM1
3.123nm
EBL2
234.1
°
R
VRM2
9.343nm
319. 9
°
M
EBL
VRM
EBL1
ON
VRM1
ON
Active marker is highlighted.
EBL2 bearing/
VRM2 range
OFFSET
EBL2
ON
VRM2
ON
+
359.9 ˚R
11.70
nm
2
<PLOTTER Operation>
Changing Chart Scale
Press the RANGE - key (shrinks the scale, and expands image) or RANGE + key
(expands the scale, and shrinks image).
Entering a Mark
1. Place the cursor where you want a mark to appear.
2. Press the MARK ENTRY soft key.
Entering a Waypoint at Own
Ship Position
Press the SAVE/MOB key momentarily to store your position as a waypoint.
Entering a Waypoint with
Cursor
WAYPOINTS/ROUTES, WAYPOINTS and WAYPOINT BY CURSOR soft keys in order to show the plotter display. where you want to enter a waypoint.
3. Press the NEW WAYPOINT soft key.
NEW
WPT MARK NAME
34
°
0 0 1 W P T
135
°
21.000'W
COMMENT
°
0.00nm
SELECT
MARK
COORD
TYPE 00:00 01JAN00
34
°
44.000'N
LAT
°
21.000'W
3 4
°
1 2 . 1 3 4 ' N
LON 003WPT
359.9
°
0.00nm
1 3 4
°
1 2 . 3 4 5 ' W
34
°
44.000'N
135
°
21.000'W
359.9
°
0 . 0 0 n m
N< - - >S
E< - - >W
SAVE
RETURN
4. Press the SAVE soft key.
Creating a Route
the new route entry screen.
ROUTE NAME
0 0 1
COMMENT
NEW
ROUTE
PLOT
LOCAL
LIST
ALPHA
LIST
CONECT
CANCEL
3. Press the LOCAL LIST or ALPHA LIST soft key to open the waypoint list. then press the ADD WPT soft key.
5. Repeat step 4 to complete the route.
6. Press the SAVE soft key to register the route, and then press the MENU key.
Navigating to Waypoints
waypoint on the plotter display.
2. Press the GO TO WPT soft key.
Setting Arrival Alarm
2. Select ARRIVAL ALARM.
3. Press the EDIT soft key to show the arrival alarm window.
ARRIVAL ALARM
▲
¡
¤
▼
ON 0.010km
OFF
5. Enter alarm range, and then press the
ENTER soft key or ENTER knob to register setting.
WAYPOINTS/ROUTES, ROUTES soft keys in order to show the ROUTE menu.
2. Press the NEW ROUTE soft key to open
3
<SOUNDER Operation>
Minute marker
Variable Range Marker
(White)
Depth scale
Time
Zero line
Icons
(alarm, battery, simulation)
Color bar
° F
50
40
S
M
Temp. scale
30
Water temp.
graph
Water temp.
display
Depth
120
LF
Tx frequency
0'30" 0
Fish echo
50.0
50
Cross-hair cursor
100
150
200
Bottom echo
Reducing Low Level Noise
SOUNDER MENU soft key.
2. Select CLUTTER, then press the EDIT soft key to show the clutter window. downward.
4. Press the ENTER soft key followed by the MENU key to close the menu.
Picture Advance Speed
MENU soft key in order.
2. Select PICTURE ADVANCE, and then press the EDIT soft key to open the picture advance window.
Selecting a sounder mode
1. Press the DISPLAY MODE soft key to show the display mode window. select a display.
3. Press the RETURN soft key to close the window.
Automatic Sounder Operation
desired.
4. Press the RETURN soft key followed by the MENU key to close the menu.
Activating Sounder Alarms
ALARM menu.
1. Press the AUTO/D.BOX soft key. select CRUISING or FISHING.
3. Press the RETURN soft key.
Manual Sounder Operation
1. Press the AUTO/D.BOX soft key.
2. Select OFF (MANUAL), and then press the RETURN soft key.
Adjusting the gain
Press the GAIN key, and then adjust the
ENTER knob or trackball.
Shifting the basic range
Press the SHIFT soft key, and then adjust the
ENTER knob.
P U B . N O . O S E - 3 5 4 3 0 - A
( 0 5 0 2 , H I M A ) M O D E L 1 8 2 4 C S E R I E S among BOTTOM, TEMPERATURE,
FISH and FISH (B/L).
3. Press the EDIT soft key.
4. Select ON (for TEMPERATURE, WITHIN
RANGE or OUT OF RANGE), and then key in the alarm range.
5. Press the ENTER soft key (or ENTER key) followed by the ALARM key to close the menu.
This manual is printed with soy ink.
4

Public link updated
The public link to your chat has been updated.
Advertisement