2-60-03a

2-60-03a
SERIES 60 SERVICE MANUAL
6.A ADDITIONAL INFORMATION
Description
Page
SPECIFICATIONS .............................................................................................
6-102
Torque Specification Exceptions - Fasteners .................................................
6-102
All information subject to change without notice.
6SE483 0204 Copyright © 2003 DETROIT DIESEL CORPORATION
From Bulletin 2-60-03
6-101
SPECIFICATIONS
This section contains the exceptions to the fastener torque specifications.
Torque Specification Exceptions - Fasteners
The proper bolt and nut torque is dependent on its size. The proper torque for metric nuts and
bolts are listed in Table 1-34 in the "General Information" section. Standard (nonmetric) nut and bolt
torque specifications are listed in Table 1-36 in the "General Information" section. The exception to
this rule is listed in Table 6-5.
Bolt and Size
Torque, N· m
Torque, lb · in.
M5 X 30.0 mm
24-30
21-26
Turbocharger Speed Sensor
10-11
90-100
Table 6-5
Exceptions - Metric Fastener Torque Specifications
NOTE:
The diesel turbo-boost pressure sensor retaining bolts are M5 x 30.0 mm long.
6-102
From Bulletin 2-60-03
All information subject to change without notice.
6SE483 0204 Copyright © 2003 DETROIT DIESEL CORPORATION
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement