Quick Reference Guide (Download PDF, 994KB)

Quick Reference Guide (Download PDF, 994KB)
2012 Infiniti QX
Quick Reference Guide
01
02
15
04
03
06
05
07
16
08 09
11
10
17
Behind
steering wheel
on column
12
13
11
14
18 19 20
22
18
Behind
21 19 shift
lever
23
01 INSTRUMENT BRIGHTNESS
cONTROL SwITcH*
02 Trip computer switches
HEADLIGHT AND TURN
03 SIGNAL SwITcH
wINDSHIELD wIPER AND
04 wASHER SwITcH
FOR
05 STEERING wHEEL SwITcHES
AUDIO* / BLUETOOTH® / NAVIGATION
06 cRUISE cONTROL
07 ADAPTIVE FRONT LIGHTING
SYSTEM (AFS) SWITCH*
08 warning systems SwITcH*
09 POWER LIFTGATE SwITcH
TILT / TELEScOPIc STEERING
10 wHEEL SwITcH*
11 DYNAMIC DRIVER ASSISTANCE
SWITCH*
12 POWER LIFTGATE MAIN SWITCH*
OUTSIDE MIRROR CONTROL
13 SWITCH
14 HOOD RELEASE*
cONTROL PANEL DISPLAY
15 ScREEN*
16 AUDIO SYSTEM
17 cLIMATE cONTROL SYSTEM
18 cLIMATE cONTROLLED
SEAT KNOBS*
19 tip-up 2nd row seat switches
HEATED STEERING wHEEL
20 SwITcH*
21 POWER OUTLET*
FRONT PASSENGER AIR BAG
22 STATUS LIGHT*
23 FOUR-WHEEL DRIVE (4WD)
SHIFT SWITCH*
*See your Owner’s Manual for information.
new system features
Theater Package (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Around View Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator . . . . 3
Blind Spot Warning (BSW) and Blind Spot Intervention™ (BSI) (if so equipped) . . 4
Adaptive Front Lighting System (AFS) (if so equipped) . . . . . . . . . . . . . . . . . 4
Lane Departure Prevention (LDP) System (if so equipped) . . . . . . . . . . . . . . 4
essential information
table of contents
Loose Fuel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Intelligent Cruise Control (ICC) System (if so equipped) . . . . . . . . . . . . . . . . . . . 5
Resetting Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
first drive features
INFINITI Intelligent Key™ System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Power Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front Seat Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2nd Row Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3rd Row Power Folding Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Automatic Drive Positioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Outside Mirror Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Starting/Stopping the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Headlight Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Windshield Wiper/Washer Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Automatic Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
FM/AM/XM® Satellite Radio with CD/DVD Player . . . . . . . . . . . . . . . . . . . . 15
Conventional (Fixed Speed) Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . 16
Intelligent Cruise Control (ICC) System (if so equipped) . . . . . . . . . . . . . . 16
Fuel-Filler Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
system guide
Trip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Bluetooth® Hands-free Phone System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Navigation System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
HomeLink® Universal Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
• A cellular telephone should not be used for any purpose while driving so full attention may be given to vehicle operation.
• Always wear your seat belt.
• Supplemental air bags do not replace proper seat belt usage.
• Children 12 and under should always ride in the rear seat properly secured in child
restraints or seat belts according to their age and weight.
• Do not drink and drive.
For more information, refer to the “Safety –– Seats, seat belts and supplemental
restraint system (section 1)”, “Monitor, climate, audio, phone and voice recognition
systems (section 4)” and “Starting and driving (section 5)” of your Owner’s Manual.
Additional information about your vehicle is also available in your Owner’s Manual,
Navigation System Owner’s Manual and at www.InfinitiUSA.com.
new s yste m fea tu res
Theater Package (if so equipped)
With this Entertainment System, you can play video
files via a DVD or CD providing images and sound
both from the front and rear display screens.
You can also connect auxiliary devices such as video
games, camcorders or portable video players to the
auxiliary jacks. (Your device will be controlled through
its own control panel.)
Rear Auxiliary Mode allows rear seat passengers to
independently display different sources on each screen.
Use the remote controller, provided with the system,
to operate the rear display screens.
Use the headphones, also provided with the system,
to listen to audio wirelessly and independently.
To view movies on the front display, stop the vehicle
in a safe location, move the shift lever to the P (PARK)
position and apply the parking brake.
To reduce driver distraction, movies will not be shown
on the front display while the vehicle is in any drive position.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
Around View Monitor
The front sonar operates only with the Around View
Monitor activated.
When the CAMERA button is pressed and the vehicle
speed is less than 6 mph (10 km/h) or the shift lever
is moved to the R (REVERSE) position, the Information
Display Screen will automatically change to view the
area surrounding the vehicle.
With the Around View Monitor displayed, the corner
sonar system can detect objects near the vehicle and warn the driver by sounding a tone and
showing an indicator in the display screen.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
2
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator
A CHECK TIRE PRESSURE warning message will appear
in the dot matrix liquid crystal display 01 and the
low tire pressure warning light 02 will illuminate when
one or more tires are low on pressure and air is needed.
•
The tire pressures should be
checked when the tires are cold.
The tires are considered cold after
the vehicle has been parked for
3 hours or more or driven less
than 1 mile (1.6km) at moderate speeds.
01
When adding air to an under-inflated tire, the TPMS
with Tire Inflation Indicator provides visual and
audible signals to help you inflate the tires to the
recommended COLD tire pressure.
02
To use the tire inflation indicator:
1. Move the shift lever to the P (PARK) position and apply the parking brake.
2.Place the ignition switch in the ON position. Do not start the engine.
3. Add air to the under-inflated tire and within a few seconds, the hazard warning lights will
start flashing.
4.When the designated tire pressure is reached, the horn will beep once and the hazard warning
flashers will stop.
5. Repeat this procedure for any additional under-inflated tires.
After tire pressures are adjusted, drive the vehicle at speeds above 16 MPH (25km/h). The
CHECK TIRE PRESSURE warning message and low tire pressure warning light will disappear.
When the low tire pressure warning light flashes for approximately 1 minute and then remains
on, the TPMS is not functioning properly. Have the system checked by an INFINITI retailer.
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the
outside temperature. Low outside temperature can lower the temperature of the air inside the
tire, which can cause a lower tire inflation pressure. This may cause the low tire pressure
warning light to illuminate. If the warning light illuminates in low ambient temperature, check
the tire pressure in your tires.
• Check the tire pressure (including the spare tire) often and always prior to long distance trips.
The Tire and Loading Information label contains valuable information. Please refer to section 9,
“Technical and consumer information” in your Owner’s Manual for the location of the Tire and
Loading Information label.
For more information, refer to the “Instruments and controls (section 2)” , “Starting and driving (section 5)” and the “Maintenance
and do-it-yourself (section 8)” of your Owner’s Manual.
3
new s yste m fea tu res
Blind Spot Warning (BSW) and Blind Spot Intervention™ (BSI) (if so equipped)
The Blind Spot Warning (BSW) system alerts the
driver when another vehicle moves into the vehicle’s
blind spot area.
An indicator light near the driver’s outside mirror
will illuminate if the radar sensors detect a vehicle
in the detection zone.
The Blind Spot Intervention™ (BSI) system can assist
the driver in returning the vehicle to the center of the
traveling lane by applying individual brake pressure
to the left or right wheels for a short period of time.
The indicator light will first illuminate in orange and
then turn green before turning off. This indicates that
the Blind Spot Warning (BSW) and Blind Spot Intervention (BSI) systems are operational.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Adaptive Front Lighting System (AFS) (if so equipped)
As your vehicle turns left or right, or drives along
winding roads, the AFS system moves your low
beams left or right, according to your vehicle’s
steering pattern.
For more information, refer to the “Instruments and controls (section 2)” of
your Owner’s Manual.
Lane Departure Prevention (LDP) System (if so equipped)
This system will help you return the vehicle to the
center direction of the traveling lane by applying
brake control to the left or right wheels individually
(for a short period of time).
For more information, refer to the “Starting and driving (section 5)” of your
Owner’s Manual.
4
ess e n t ia l i n fo r mat ion
Loose Fuel Cap
A LOOSE FUEL CAP warning message will appear in the
dot matrix liquid crystal display 01 when the fuel filler cap is not tightened correctly.
02
To tighten, turn the cap clockwise until a single click
is heard.
The warning message will disappear when the vehicle
detects the fuel-filler cap is properly tightened and the
reset button 02 is pressed.
01
If the cap is not properly tightened, the Malfunction Indicator Light
may illuminate.
For more information, refer to the “Instruments and controls (section 2)” and the “Pre-driving checks and adjustment (section 3)”
of your Owner’s Manual.
Intelligent Cruise Control (ICC) System (if so equipped)
The Intelligent Cruise Control (ICC) system automatically maintains a selected distance from
the vehicle traveling in front of you according to that vehicle’s speed (up to the set speed) or
at the set speed when the road ahead is clear.
This system may not function properly due to road conditions when direct sunlight, rain, mud,
snow or other road spray cause the sensor to become blocked.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Resetting Outside Mirrors
If mirrors are manually operated or bumped, the mirror body can become loose at the pivot point.
To correct electronic mirror operation, cycle mirrors by pushing the outside rearview mirror
folding switch to the CLOSE position until completely closed, then push the switch to the OPEN
position until the mirror is completely open.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
5
f i rst dr i ve fea tu res
INFINITI Intelligent Key™ System
The INFINITI Intelligent Key™ system allows you to lock or
unlock your vehicle, open your liftgate and start the engine.
01
NOTE: It is important to make sure the Intelligent Key is
with you (that is, in your pocket or purse).
The operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch 01 once or press the button 02 on the keyfob.
To unlock the vehicle, perform one of the following procedures:
• Push either door handle request switch 01 once;
the corresponding door will unlock. Push the door
handle request switch 01 again within 1 minute;
all other doors will unlock, or
• Press the button 03 on the keyfob to unlock the
driver’s side door. Press the button again; all other
doors will unlock.
To open the liftgate, press the
02
03
04
05
button 04 for more than 1 second.
The Intelligent Key can also be used to activate the panic alarm by pressing and holding the
button 05 for more than 1 second. Once activated, the panic alarm and headlights will stay
on for 25 seconds.
INTELLIGENT KEY BATTERY DISCHARGE
If the battery of the Intelligent Key is discharged, or
environmental conditions interfere with the Intelligent
Key operation, start the engine according to the
following procedure:
1. Move the shift lever to the P (Park) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent Key
and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing the
brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)”
and the “Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
6
Power Liftgate
When the liftgate is closed, the liftgate will fully open
automatically by:
01
Pushing the power liftgate switch 01 on the
instrument panel.
Pushing the liftgate opener switch 02 .
02
Pressing the power liftgate button 03 on the
INFINITI Intelligent Key™ for more than one second.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
03
Front Seat Adjustments
To slide the seat forward or backward, push the control 01 forward or backward .
switch
To recline the seatback, push the switch
forward or backward.
02 02
01
03
SEAT LIFTER
To raise or lower the front portion or height of the seat, 01
push the front or back end of the switch
up
or
down.
LUMBAR SUPPORT
To adjust the seat lumbar support, push the front or back end of the switch
03 .
For more information, refer to the “Safety —— seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
7
f i rst dr i ve fea tu res
2nd Row Seats
The 2nd row seat can be tipped forward for easy entry to or exit from the 3rd row seat and can
be folded flat for maximum cargo hauling/extra storage space.
TIPPING THE 2ND ROW SEATS FORWARD FOR ENTRY TO THE 3RD ROW
Manual Controls
1. Raise the armrest up to the stowed position.
2. Lift up on the seatback release latch A or the recline
lever B . The seatback will tip forward.
A
3. Lift up on the lower rear corner of the seat bottom and
2.
tip the seat forward.
3.
To return the 2nd row seats to the standard position:
1.Push back on the seat to return it to its original position
and lock it in place.
2.
2.Pull up and push back
on the seatback to lock
it in place.
B
1.
3. Use the seat reclining lever B to adjust the seat to the desired position.
Power Remote Controls (if so equipped)
To fold down and tip forward the 2nd row seatback,
push and hold the remote tip-up 2nd row seat switch
01 located on the instrument panel.
The lower corner of the seat base will lift and the 2nd
row seat will tip forward.
01
01
FOLDING THE 2ND ROW SEATS FLAT
1. Raise the armrest up to the stowed position.
2.Pull the seat bottom release strap C to position the
seat bottom forward.
3.Pull seat reclining lever B up to fold the seatback
forward.
Note: There is a carpet panel flap on the back side of the
seatback that can be folded toward the back of the vehicle
to provide a level cargo floor when the 3rd row seats are
also folded flat. The center console (if so equipped) can
also be removed.
8
C
2.
3.
To Return the 2nd Row Seats to the Standard Position:
1. Return the carpet panel flap to the back side of the
seatback and secure it in place.
2.Pull the seat reclining lever B up while you lift up
and push back on the seatback until it locks in place.
B
3. Return the seat bottom backward to its original position
until it locks in place.
2.
4. Use the seat reclining lever to adjust the seat to the
desired position.
3.
For more information, refer to the “Safety — Seats, seat belts and supplemental
restraint system (section 1)” section of your Owner’s Manual.
3rd Row Power Folding Seats
The 3rd row seats can be folded flat for maximum cargo
hauling or extra storage space.
Before folding down the 3rd row seats:
• The vehicle’s shift lever must be in P (PARK) or
N (NEUTRAL).
• Place the seat belt buckles in the storage of the seat
cushion 01 to avoid dropping them under the seat
cushion or causing damage to your leather seats.
01
• Disconnect and secure the center seat belt and
tongues into the retractor base 02 .
1. To release the seat belt connector tongue, insert a
suitable tool (a key, for example) into the opening
on the side of the connector buckle.
02
2. Retract the seat belt up to the retractor base
located in the rear ceiling storage area.
3. Insert the seat belt tongue into the fabric sleeve
so that it will lay flat.
4. Secure the connector tongue into the retractor base.
5. Always reconnect the center seat belt when the
seat is returned to the upright position.
• Make sure that there are no objects on the seat
cushion.
01
• Lower the 3rd row head restraints.
To lower the seat, push and hold the front portion A
of the right or left 3rd row power folding seat switch 01 .
To return the seats to an upright position, press the back portion
B of the right or left 3rd row power folding seat switch 01 .
A
B
A
B
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
9
f i rst dr i ve fea tu res
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and
outside mirrors to the desired positions using
the adjusting switches for each feature.
• Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least 1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligent Key™.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
Move the control switch 01 right or left to select the
right or left side mirror.
Adjust each mirror to the desired position using the
switch 02 .
Move this switch 01 to the center “neutral” position
to prevent accidentally moving the mirror.
01
02
03
POWER FOLDING OUTSIDE MIRRORS (if so equipped)
Push the switch 03 to the CLOSE position to fold the outside rearview mirrors and push the
switch 03 to the OPEN position to unfold the outside rearview mirrors.
REVERSE TILT-DOWN FEATURE
When backing up the vehicle, the right and left outside mirrors will turn downward automatically
to provide better rear visibility.
1.Push the ignition switch to the ON position.
2. Move the shift lever to the R (REVERSE) position.
3.Choose the right or left outside mirror by operating the outside mirror control switch.
4. The outside mirror surfaces move downward.
When one of the following conditions has occurred, the outside mirror surfaces will return to
their original positions.
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the center “neutral” position.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
10
Starting/Stopping the Engine
Depress the brake pedal.
Press the ignition switch START/STOP button to start
the engine.
NOTE: It is important to make sure the INFINITI Intelligent
Key™ is with you (that is, in your pocket or purse).
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and apply the parking brake.
Press the ignition switch START/STOP button to turn the engine off.
EMERGENCY ENGINE SHUT OFF
To shut off the engine in an emergency situation while driving, perform one of the following procedures:
Rapidly push the push button ignition switch 3 consecutive times, in less than 1.5 seconds, or
Push and hold the push button ignition switch for more than 2 seconds.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control
HEADLIGHT CONTROL
Turn the headlight control switch to the
position
01
to
turn
on
the
front
parking,
side
marker,
tail,
license
plate and instrument panel lights. Turn the switch to the
position 02 to turn on the headlights.
03
01
02
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it is dark and off when it is
light. The system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position 03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
01 or
control switch to the OFF,
position 02 .
HIGH BEAM SELECT
Push the headlight control switch forward 04 to
select the high beam function. The blue indicator light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to
select the low beam. The blue indicator light goes off.
Pull and release the headlight control switch 05 to
flash the headlight high beams on and off.
04
05
11
f i rst dr i ve fea tu res
FOG LIGHT SWITCH
NOTE: The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the
to turn the fog lights on.
position 06
06
Turn the switch (inside collar) to the OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Windshield Wiper/Washer Switch
Move the lever to the following positions to operate
the windshield wipers:
01 Mist (MIST) - One sweep operation of the
front wipers.
03
MIST 01
OFF
02 Auto (AUTO) - Operates the rain-sensing auto
front wiper system. The rain sensor sensitivity
level can be adjusted by twisting the time
control ring 03 .
AUTO 02
LO 04
HI 05
04 Low (LO) - Front wipers operate at a continuous
low-speed.
05 High (HI) - Front wipers operate at a continuous
high-speed.
06 Pull the lever toward you to activate the front
washer. The front wipers will operate several
times.
06
09
REAR WINDSHIELD WIPER AND WASHER
07 Intermittent (INT) - Rear wiper operates
intermittently.
08 Low (ON) - Rear wiper operates at a continuous
low-speed.
09 Push the lever forward to activate the rear washer.
The rear wiper will operate several times.
For more information, refer to the “Instruments and controls (section 2)”
of your Owner’s Manual.
12
07
INT
08
ON
Automatic Climate Controls
05
06
03
07
08
01
02
04
12
11
10
09
01 AUTO BUTTON/TEMPERATURE CONTROL DIAL
The auto mode may be used year-round. Press the AUTO button to turn the system on
and the system will automatically control the inside temperature (automatic cooling and/
or dehumidified heating), air flow distribution and fan speed.
Turn the driver’s side temperature control dial left for cooler air or right for warmer air.
02 DUAL BUTTON/PASSENGER’S SIDE TEMPERATURE CONTROL DIAL
Press the passenger’s side DUAL control button to turn the passenger’s side temperature
controls on or off. This will allow the passenger’s side temperature to be adjusted
independently from the driver’s side control by turning the passenger’s side control.
Turn the passenger’s side temperature control dial left for cooler air or right for warmer air.
03 FAN SPEED CONTROL BUTTONS
Press the fan speed control buttons to manually decrease the fan speed
speed .
or increase the fan
04 MODE BUTTON
Press the MODE button to cycle through the following air flow outlets:
Air flows from the center and side vents.
Air flows from the center, side and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
05 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the defroster control button
to turn the system on. The A/C automatically turns on
when the defroster mode is selected. This feature removes humidity from the air.
Use the temperature control dial 01 to set the desired temperature.
To set the defroster on high, press the fan speed control button
the maximum setting.
to increase the fan speed to
06 REAR WINDOW AND OUTSIDE MIRROR DEFROSTER SWITCH
Push the rear window defroster switch
This function automatically turns off after approximately 15 minutes.
to turn the system on or off.
13
f i rst dr i ve fea tu res
07 AUTOMATIC INTAKE AIR CONTROL (if so equipped)
In the auto mode, air intake will be controlled automatically.
This mode helps to adjust the inside vehicle temperature more effectively.
To manually control air recirculation inside the vehicle, press the air recirculation button
08 . The indicator light on the button will illuminate.
07 until the
To return to the automatic control mode, push the auto-recirculation button
indicator light on the button illuminates.
09 UPPER VENT BUTTON
When the upper vent button is pressed, the air flow against the driver’s or passenger’s
upper body becomes gentle. The indicator light on the button will illuminate.
In this mode, air from the upper ventilator flows to control the cabin temperature without
blowing air directly on the occupants.
10 A/C BUTTON
Press the A/C button to manually turn the A/C on or off.
When on, this system not only provides cooler air, but removes humidity from the air to help
avoid window fogging.
11 OFF BUTTON
Press the OFF button to turn the climate control system off.
12 REAR A/C BUTTON
To control the rear automatic air conditioning system
with the front air conditioner control panel, press the
REAR button.
When the rear automatic air conditioning system is
on, the indicator light on the REAR button will
illuminate and the front display will switch to the
rear air conditioner screen.
To adjust the front air conditioning system, press the REAR button again.
For more information, refer to the “Instrument and controls (section 2)” or the “Monitor, climate, audio, phone and voice recognition
systems (section 4)” of your Owner’s Manual.
14
FM/AM/XM®* Satellite Radio With CD/DVD Player
01
05
06
03
02
04
01 VOLUME/ON•OFF CONTROL KNOB
Press the VOL/ON•OFF control knob to turn the system on or off. Turn the knob right or
left to increase or decrease the volume.
02 SEEK/CAT AND TRACK BUTTONS
To scan quickly and stop at the previous or next broadcast station, press the
button or the TRACK
button.
For XM® satellite radio, press the
SEEK·CAT button or the TRACK
the first channel of the previous or next category.
To change tracks on a CD, press the
SEEK·CAT button or the TRACK
To fast forward or rewind a track on a CD, press and hold the
TRACK
button.
SEEK·CAT
button to switch to
button.
SEEK·CAT button or the
03 TUNE/FOLDER/AUDIO CONTROL KNOB
To manually tune the radio, turn the TUNE/FOLDER/AUDIO knob left or right.
04 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and eighteen for XM
satellite radio.
To store a station in a preset you must first select a radio band by pressing the FM•AM 05
or XM 06 button, then tune to the desired AM, FM or XM satellite radio station.
Then press and hold the desired station preset button (1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indicator will then
display and the sound will resume. Programming is now complete.
To retrieve a previously set station, select the radio band where the preset was stored then
press the corresponding station select button (1-6).
*XM® Satellite Radio is only available on vehicles equipped with optional XM® satellite subscription service.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
15
f i rst dr i ve fea tu res
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
04
03
To activate the cruise control, push the ON/OFF
switch 01 . The CRUISE indicator light in the
instrument panel will illuminate.
02
01
To set cruising speed, accelerate the vehicle to the
desired speed, push the COAST/SET switch 02 and
release. Take your foot off the accelerator pedal. Your
vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 03 . When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 02 . Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 04 .
To turn off cruise control, push the ON/OFF switch 01 . The CRUISE indicator light in the
instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode,
press the CRUISE ON/OFF button 01 for less than
1.5 seconds. The indicator light 02 will illuminate.
03
Accelerate to the desired speed.
01
Push down on the COAST/SET switch 03 and release
it. Cruise Control will be set to the desired speed.
04
Press the distance button 04 repeatedly to change
the set distance between long, middle, and short.
When a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed indicator
lights will illuminate 05 in set mode.
When a vehicle is detected ahead of you in the lane,
the vehicle ahead detection, set distance, and set
vehicle speed indicator lights will illuminate 06 in set mode.
16
02
05
06
To set conventional fixed speed-control cruise mode:
While Cruise Control is off, press the CRUISE ON/OFF button and hold it down for more than
1.5 seconds. The CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.
Cruise Control should be set to the desired speed.
To switch between the two cruise control modes:
When one of the two cruise modes is in use, you must turn the system off, and then turn it on
again to select the other Cruise Control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Fuel-Filler Door
The fuel-filler door is located on the left, rear side of the
vehicle.
When the doors of the vehicle are locked or unlocked,
the fuel-filler door is automatically locked or unlocked
at the same time.
To open the door, once unlocked, push the right side
of the door.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
17
syste m g ui d e
Trip Computer
When the
button 01 is pressed, the following
modes will appear on the dot matrix liquid crystal
display 02 :
01
• MPG – Displays the current and average fuel
consumption since the last reset.
03
• MPG/MPH – Displays the average fuel consumption
and speed since the last reset.
• TIME/MILES – Displays the elapsed time and
distance driven since the last reset.
• RANGE – Displays the estimated distance to empty
(dte) the vehicle can be driven before refueling.
• OUTSIDE TEMP – Displays the temperature outside
your vehicle.
• SETTING – Allows you to set reminders for alerts and
maintenance intervals or change the language and
units used in the system.
—Press the
button 03 to cycle through the various setting modes.
—Press the
button 01 to choose the selected mode.
• WARNING – If there are any.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Bluetooth® Hands-free Phone System
With an overhead microphone and sound
transmitted through the audio system speakers,
the Bluetooth® Hands-free Phone System utilizes
Bluetooth wireless technology and voice recognition
to provide hands-free cellular phone communication.
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Close all windows. Surrounding noises may interfere
with system operation and performance.
Press the button on the steering wheel to activate
voice recognition.
Wait for the tone before speaking.
Begin speaking a command within 5 seconds of the
tone.
*Some jurisdictions prohibit the use of cellular telephones while driving.
18
02
Speak in a clear and natural voice without pausing between words.
Look straight ahead and avoid speaking too loudly or too softly.
To go back to the previous command, say “Go back”.
To cancel a voice recognition session, say “Exit” or press and hold the
To interrupt the system voice and give a command quickly, press the
button.
button.
When speaking Phonebook names, please be aware some phones require the last name to be
spoken before the first name. For example, “Michael Smith” may be spoken as “Smith Michael”.
To increase or decrease the volume of the voice prompts, push the volume control switches
or + on the steering wheel or turn the VOL/ON•OFF control knob on the audio system while
the system is responding.
If the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.
Some commands are not available while the vehicle is in motion.
The “Help” command can be used to hear a list of available commands at any time.
Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information
regarding your Bluetooth phone.
CONNECTING PROCEDURE
NOTE: The vehicle must be stationary when connecting
the phone.
1.Press the button and select the “Connect
Phone” key.
2. Initiate connecting from the phone.
•
The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned
by INFINITI and cannot be changed.)
3.When the connecting is complete, the screen will return to the Phone menu display.
PHONEBOOK SETUP
Depending on your cell phone, the system may
automatically download your cell phone’s entire
phonebook to the vehicle’s Bluetooth system.
If the phonebook does not download automatically,
40 entries can be individually downloaded.
To manually download entries:
1.Press the button and select the “Vehicle
Phonebook” key.
19
syste m g ui d e
2.Select the “Add New” key at the top of the display.
There are different methods to input a phone
number. Select one of the following options:
• “Copy from Call History” to save a number from
the Outgoing, Incoming or Missed Calls lists.
• “Copy from the Handset” to save a number that
has been downloaded from your handset to the
vehicle.
• “Enter Number by Keypad” to input the number and name manually.
MAKING A CALL
To make a call, follow this procedure:
1.Press the button on the steering wheel. The
“PHONE” menu will appear on the control panel
display.
2. Select the “Vehicle Phonebook”, “Call History”,
“Handset Phonebook” or “Dial Number” key.
3. Select the desired entry from the list.
4. Select “Call” to start dialing the number.
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering
wheel or touch the “Answer” key. To reject the call,
touch the “Reject Call” key.
To hang-up, press the
“Hang-Up” key.
button or touch the
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual or please
visit www.InfinitiUSA.com/bluetooth.
20
me mo
Navigation System
Your Navigation System can calculate a route from the current location to a preferred destination.
The real-time map display and turn-by-turn voice guidance will lead you along the route.
The Navigation System will continually update your vehicle’s position. If you have deviated
from the original route, it will recalculate the route from your current location.
Press the INFO button to access important data such as distance to empty, your tire rotation
schedule and other maintenance interval reminders.
For more information, please refer to your Navigation System Owner’s Manual.
HomeLink® Universal Transceiver
HOMELINK®
The HomeLink® system can learn and consolidate the functions of up to three different hand held transmitters, operating items such as garage doors, property gates, outdoor and indoor
lights or alarm systems.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website at
www.homelink.com or call 1-800-355-3515.
21
Printing: October 2011 (04) / QR2E 0Z62U1 / Printed in USA
This Quick Reference Guide is intended to provide an overview of some of the unique features
of your new vehicle. See your Owner’s Manual, which contains important safety warnings and
information about the operation and maintenance of your vehicle, for complete details. Nissan
North America, Inc. reserves the right to make changes, at anytime, without prior notice, in prices,
colors, materials, equipment, specifications, and models and to discontinue models or equipment.
Due to continuous product development and other pre- and post-production factors, actual vehicle,
materials and specifications may vary. Some vehicles are shown with optional equipment. See
the actual vehicle for complete accuracy. Specifications, options and accessories may differ in
Hawaii, U.S. territories and other countries. For additional information on availability, options or
accessories, see your INFINITI retailer or contact Nissan North America, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement