- No category
advertisement
▼
Scroll to page 2
FDX4D Series 4 bi-directional data channels D 4 Description Features The ComNet™ FDX4D(M)(S)1 Series data transceiver series provide transmission of four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. The data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate. - Available with FC or ST Optical connectors - Supports RS232, RS422, and 2 or 4-wire RS485 with tristate data interfaces - Four bi-directional data channels - Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. - Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events. - Robust design ensures extremely high reliability in unconditioned out-of-plant environments - Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters - Hot-swappable rack modules - Interchangeable between stand-alone or rack mount use – ComFit - Lifetime Warranty LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427 FDX4D(M)(S)1 Series 4 bi-directional data channels specifications ELECTRICAL & MECHANICAL DATA Data Channels: Data Interface: Data Format: 4 RS232, RS422 and RS485 (2W/4W) NRZ, NRZI, Manchester, Bi-Phase and Sensornet DC-250 Kbps (NRZ) <1 in 10-9 @ Maximum Optical Loss Budget Simplex or Full-Duplex Power: Surface Mount: Rack Mount: Number of Rack Slots: Current Protection: WAVELENGTH 1310/1550 nm, Multimode and Single Mode Shipping Weight: NUMBER OF FIBERS 1 LED INDICATORS - Received Data - Transmitted Data - Optical Carrier Detect OPTICAL EMITTER Laser Diode Data Rate: Bit Error Rate: Operating Mode: 8-15 VDC @ 4W From Rack 2 Automatic Resettable Solid-State Current Limiters Meets IPC Standard 6.1 × 5.3 × 2.2 in., (15.5 × 13.5 × 5.6 cm) <2 lb./0.9 kg Circuit Board: Size (in./cm) (L×W×H) ENVIRONMENTAL MTBF: Operating Temp: Storage Temp: Relative Humidity: >100,000 hours -40˚ C to +75˚ C -40˚ C to +85˚ C 0% to 95% (non-condensing)* * May be extended to condensation conditions by adding suffix ‘/C’ to model number for conformal coating. CONNECTORS Optical: Power: Data: ST or FC Terminal Block Terminal Block MADE IN THE USA FIBERS REQUIRED PART NUMBER DESCRIPTION FDX4DM1A Data Transceiver (1310/1550 nm) FDX4DM1B Data Transceiver (1550/1310 nm) FDX4DS1A Data Transceiver (1310/1550 nm) FDX4DS1B Data Transceiver (1550/1310 nm) Accessories 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included) Options Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory) 1 1 FIBER Multimode 62.5/125µm Single Mode 9/125µm OPTICAL PWR BUDGET MAX. DISTANCE† # RACK SLOTS 16 dB 3 km (2 miles) 2 23 dB 69 km (43 miles) 2 Add ‘/FC’ for FC Optical Connector Add ‘/ST’ for ST Optical Connector Add ‘/G’ for Gold-Plated Connector DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1) NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended. † Distance may be limited by optical dispersion. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J In a continuing effort to improve and advance technology, product specifications are subject to change without notice. D 4 FDX4DS1A FDX4DS1B 1 Fiber 9/125µm SM Up to 69 km (43 miles) 4 D OPTICAL FIBER 3 CORPORATE DRIVE | DANBURY, CT 06810 | USA T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [email protected] 8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected] © 2010 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC. 10.28.10
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project