Fluke 717 500G Supplement

Supplement

Title: 715 Inst.Sht. Supplement Issue: 6

Part Number: 650314 Issue Date:

Print Date: July 1997 Page Count:

Revision/Date: 3, 8/05

1/14

2

This supplement contains information necessary to ensure the accuracy of the document described above.

© 2007-2014 Fluke Corporation.

All rights reserved.



715 Instruction Sheet Supplement

Change #1

Under General Specifications, add the following:

Protection Class: Pollution Degree II

Change #2

Under Specifications, table DC V Input and Output change the following:

From: Voltage drive capability: 1 mA

To: Voltage drive capability:

SN < 9494143 = 1 mA

SN > 9494143 = 10 mA  10 V, 3 mA > 10 V

Change #3

On the second panel, under International Symbols, add the following:

 Conforms to Australian C-Tick directives

Change #4,

47219

Under Specifications, DC mA Output, Source

mode, Compliance, add the following:

750  at 20 mA with HART resistor on and battery voltage  6.8 V

Change #5

Under Span Check Feature, replace steps 3 and 5 with the following: the 0% value.

5. Again, press the   scroll keys simultaneously to store the 100% value.

4/09 1

Supplement 714 Instruction Sheet

Change #6,

67381

On the second panel, under International Symbols, add:



Conforms to relevant South Korean

EMC Standards.

Under General Specifications, add:

Electromagnetic Compatibility ...... Applies to use in

Korea only. Class A

Equipment (Industrial

Broadcasting &

Communication

Equipment)

[1]

[1] This product meets requirements for industrial

(Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes.

2