Roland V-Synth GT Installation guide

Roland V-Synth GT Installation guide
driver installation guide
Installing the driver
Disconnect your USB devices
Disconnect all USB cables from your computer, except for a USB keyboard and/or USB
mouse (if used). Do not connect the V-Synth GT to your computer yet.
Close all software
Close all software and utility programs including anti-virus software.
1
*
Copyright © 2007 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any
form without the written permission of ROLAND CORPORATION.

F
o
n
F
n
M

Z
*
Proceed to the next step as appropriate See other side
for your operating system.
1
Preparations for installation
1
Insert the included CD-ROM into your computer.
1
Insert the included CD-ROM into your computer.
2
Start up the driver installer.
2
Start up the installer driver.
3
o
In order to connect the V-Synth GT to your computer and use it,
you must install the driver and make settings.
Preparations for installation
1.
2.
3.
4.
5.
E
04674756 07-04-1N
Choose [Start] — [My Computer].
Double-click “DVD/CD-ROM drive.”
Double-click the DRIVER folder.
Double-click the XP folder.
Double-click the Setup icon.
1.
2.
3.
4.
5.
Click [Next] as instructed by the “Driver Setup” dialog box.
3
Choose [Start] — [Computer].
Double-click “DVD/CD-ROM drive.”
Double-click the DRIVER folder.
Double-click the Vista folder.
Double-click the Setup icon.
If a User Account Control screen appears, click [Continue].
If the screen indicates “Driver installation must be performed by an administrator,” you must log on to Windows as a user whose account type is
Administrator, and perform the installation again.
1. The “Driver Setup” dialog box will appear. Click [Next] as directed
in the screen.
2. To begin the installation, click [Next] once again.
This completes the preparations for installing the driver.
If a dialog box regarding Windows logo testing appears, click [Continue
Anyway].
3. The “Roland V-Synth GT Driver will be installed on your computer”
dialog box will appear.
2
Driver installation and connections
1
This completes the preparations for installing the driver.
The screen will indicate “Roland V-Synth GT Driver will be installed on
your computer.”
1. Click [Next].
2
If a different message appears, proceed as directed by that message.
Driver installation and connections
1
2. To begin the installation, click [Next].
2
Use a USB cable to connect the V-Synth GT to your computer.
1. The screen will indicate “The V-Synth GT driver has been installed.”
1. Switch off the power on the V-Synth GT.
2. Use a USB cable to connect the V-Synth GT to your computer.
2
If a different message appears, proceed as directed by that message.
Power up the V-Synth GT.
3
1. Switch on the power on the V-Synth GT.
2. The message “Found New Hardware” will appear near the taskbar,
and then the “Found New Hardware Wizard” will appear.
2. Use a USB cable to connect the V-Synth GT to your computer.
4
If a different message appears, proceed as directed by that message.
3. Installation is complete when the screen indicates “Device driver
software installed successfully.”
If a dialog box regarding Windows logo testing appears, click [Continue
Anyway].
Click [Finish] to complete the installation.
5
1. Make sure that “Roland V-Synth GT” is displayed, and click
[Finish].
2. If the “System Settings Change” dialog box appears, click [Yes] to
restart Windows.
3. If the “System Settings Change” dialog box appears, click [Yes].
This completes the driver installation.
4. Restart Windows.
3
Performance Options settings
3
Performance Options settings
By making these settings you may be able to prevent clicks or pops in the sound. Be sure to make the settings as
described below.
1
By making these settings you may be able to prevent clicks or pops in the sound. Be sure to make the settings as
described below.
1
2. If the screen indicates “Pick a category,” click [Performance and
Maintenance].
2
In the area at left, click “Advanced system settings.”
3
If a User Account Control screen appears, click [Continue].
If you are asked to enter the password of an Administrator account, log on
to Windows as a user whose account type is Administrator, and then make
the settings again.
3. In “or pick a Control Panel icon,” click the [System] icon.
Open the Performance Options dialog box.
1. Click the “Advanced” tab, and in the “Performance” area, click
[Settings].
3
Open the System Properties dialog box.
1. Choose [Start] — [Control Panel].
The control panel will open.
2. Click [System and Maintenance].
3. Then click the [System] icon.
Open the System Properties dialog box.
1. Choose [Start] — [Control Panel].
The control panel will open.
2
Click [Close] to complete the installation.
1. In the “Driver Setup” dialog box, click [Close].
2. In the “Driver Setup” dialog box, click [Close].
This completes the driver installation.
Turn on the power on the V-Synth GT.
1. Turn on the power on the V-Synth GT.
2. The message “Installing device driver software” will appear near
the taskbar, and the driver will be installed automatically.
Choose the installation method.
1. Choose “Install the software automatically (Recommended),”
and click [Next].
4
Use a USB cable to connect the V-Synth GT to your computer.
1. Turn off the power on the V-Synth GT.
If the Found New Hardware Wizard asks whether you want to connect to
Windows Update, choose “No, ...” and click [Next].
3
If a Windows Security dialog box appears, click [Install].
4
Open the performance options dialog box.
5
Enable “Background services.”
1. Click the “Advanced” tab, and in the Performance area click [Settings].
Enable “Background services.”
1. Click the “Advanced” tab.
1. Click the “Advanced” tab.
2. In the “Processor scheduling” area, choose “Background services”
and click [OK].
2. In the “Processor scheduling” area, choose “Background services”
and click [OK].
3. In the System Properties dialog box, click [OK].
3. In the System Properties dialog box, click [OK] to close System
Properties.
This completes the performance options settings.
This completes the performance options settings.
4
Input/output device settings
In order to take full advantage of your software, make input/output device settings for your software as described below. For details on the procedure, refer to the user’s guide for the software you’re using.
MIDI OUT device
Roland V-Synth GT
MIDI IN device
Roland V-Synth GT
WAVE OUT device
Roland V-Synth GT
WAVE IN device
* This receives audio signals sent from the V-Synth GT to your computer.
Roland V-Synth GT
If you’re using the V-Synth GT with an ASIO-compatible application such as Cubase, choose “Roland V-Synth GT” for the ASIO settings of your application.
To prevent audio feedback loops or double monitoring, turn off monitoring in
your application, or set things so ASIO Direct Monitoring is used.
ASIO device
* The V-Synth GT does not support ASIO Direct Monitoring. Support is emulated for your convenience.
* If you’re using the V-Synth GT with ASIO, we recommend that you make settings in your application so that the Microsoft GS Wavetable SW Synth is not used. (This is in order to decrease the
processor load, and for convenience in changing the buffer size of the driver.)
* In Cubase SX, if the V-Synth GT’s sampling frequency is different than Cubase SX’s project setting,
a message such as “Sample could not be set” may appear, and you will be unable to record or
play back correctly. If this occurs, you can ensure correct operation by opening “Project Setup,”
making sure that the sampling frequency matches, and clicking [OK].
4
Input/output device settings
In order to take full advantage of your software, make input/output device settings for your software as described below. For details on the procedure, refer to the user’s guide for the software you’re using.
The audio input/output of the V-Synth GT is 2-in/2-out.
WAVE OUT device
WAVE IN device
ASIO device
OUT (Roland V-Synth GT)
If you’ve renamed this in the control panel “Sound” settings, the name you specified will appear. In WDM/KS compatible applications such as Cakewalk SONAR,
this will appear
pp
as “Roland V-Synth
y
GT.”
IN (Roland V-Synth GT)
If you’ve renamed this in the control panel “Sound” settings, the name you specified will appear. In WDM/KS compatible applications such as Cakewalk SONAR,
this will appear
pp
as “Roland V-Synth
y
GT.”
If you’re using the V-Synth GT with an ASIO-compatible application such as Cubase, choose “Roland V-Synth GT” for the ASIO settings of your application.
* To prevent audio feedback loops or double monitoring, turn off monitoring in your application,
or set things so ASIO Direct Monitoring is used.
* The V-Synth GT does not support ASIO Direct Monitoring. Support is emulated for your convenience.
* If you’re using the V-Synth GT with ASIO, we recommend that you make settings in your application so that the Microsoft GS Wavetable SW Synth is not used. (This is in order to decrease the
processor load, and for convenience in changing the buffer size of the driver.)
V-Synth GT Driver CD-ROM
1
Readme_j.htm
?
Driver installation
1
Insert the included CD-ROM into your Mac.
2
Start up the Mac driver installer.
1. Double-click V-SYNTH GT DRIVER CD-ROM.
2. Double-click the V-SYNTH GT Driver OS X folder.
3. Double-click VSynthGTUSBDriver.pkg.
3
As directed by the “Install Roland V-Synth GT Driver” screen, click [Continue].
Can’t install the driver
● Did you log on to Windows with the appropriate user privileges?
You must log on to Windows as a user whose account type is Administrator.
Can’t select/use the V-Synth GT device
● Is the driver correctly installed?
If you’re unable to use the V-Synth GT even though the driver was installed, it is possible that the driver was not installed correctly. Re-install the driver following the correct procedure.
1. “Install Roland V-Synth GT Driver” will appear; click [Continue] as
directed in the screen.
2. When “Select a Destination” appears, select the startup disk, and
click [Continue].
● Is the V-Synth GT’s MIDI/WAVE device name displayed?
If you’re using Windows and the device name is not displayed, close all applications that are using the V-Synth GT, switch off the
V-Synth GT’s power, then turn it back on again.
If this does not solve the problem, install the driver once again.
3. When “Easy Install” appears, click [Install] (or [Upgrade]).
If an authentication dialog box appears, enter the password you use for
Mac OS, and click [OK].
● Could your computer have entered Sleep or Standby (Suspend) mode while the V-Synth GT was powered up and connected?
4. When “Installing this software requires you to restart ~” appears,
click [Continue Installation].
5. When you see “The software was successfully installed,” click
[Restart] to restart your Mac.
If the V-Synth GT does not operate correctly after your computer returns from Sleep or Standby (Suspend) mode, close all the
software you’re using, and then turn the V-Synth GT’s power off, then on again.
● While using the V-Synth GT, could you have disconnected and reconnected the USB cable or switched
the V-Synth GT’s power off, then on again?
If you disconnect and reconnect the USB cable or cycle the power to the V-Synth GT during use, it may stop operating correctly.
In this case, close all the software you’re using, and then turn the V-Synth GT’s power off, then on again.
This completes the driver installation.
2
Connecting the V-Synth GT to your Mac
1
● On some computers, if Windows is started up when the V-Synth GT is already connected, the driver
might not be loaded correctly, making it impossible to use the V-Synth GT via USB.
In this case, turn on the V-Synth GT’s power after Windows has started up, or connect it after Windows has started up.
Use a USB cable to connect the V-Synth GT to your Mac.
1. Switch OFF the V-Synth GT’s power switch (POWER).
2. Use a USB cable to connect the V-Synth GT to your Mac.
A number such as “2-” is now displayed at the beginning of the device name
● Could you have connected the V-Synth GT to a different USB port?
If you connect the V-Synth GT to a different USB port, the operating system may automatically add a number to the beginning of
the device name. This should not be a cause for concern when using the V-Synth GT.
Connect the cable to a USB connector on the Mac itself (not to the USB connector on your keyboard).
2
Check the following items first. For other problems, or for directions on how to uninstall the driver, refer
to Readme_E.htm on the CD-ROM.
Visit us online at www.Roland.com
Switch on the V-Synth GT’s power.
1. Turn the V-Synth GT’s power switch ON.
This completes the connections between the V-Synth GT and your Mac.
3
Audio input/output settings
?
AFRICA
1
In the Mac OS “System Preferences,” click “Sound.”
2
Choose “Roland V-Synth GT 44.1 kHz” for the following items.
1. Sound Effects tab “Play alerts and sound effects through”
2. Output tab “Choose a device for sound output”
3. Input tab “Choose a device for sound input”
This completes the audio input/output settings.
EGYPT
Al Fanny Trading Office
9, EBN Hagar A1 Askalany
Street,
ARD E1 Golf, Heliopolis,
Cairo 11341, EGYPT
TEL: 20-2-417-1828
REUNION
Maison FO - YAM Marcel
25 Rue Jules Hermann,
Chaudron - BP79 97 491
Ste Clotilde Cedex,
REUNION ISLAND
TEL: (0262) 218-429
SOUTH AFRICA
4
MIDI input/output settings
1
Start up Audio MIDI settings and make the settings.
1. In the Mac OS Applications — Utilities folder, double-click Audio
MIDI Setup.
2. Click the MIDI Devices tab.
3. In the Audio MIDI Setup dialog box, make sure that “V-Synth GT”
is shown.
If “V-Synth GT” is not shown, or is grayed-out, the V-Synth GT has not been
detected correctly. Try clicking “Re-scan MIDI.” Also try powering the VSynth GT off, then on again.
2
Add “V-Synth GT” as an external device.
1. Click “Add Device.” The screen will indicate “new external device.”
3
For “new external device,” change “Device Name” to V-Synth GT.
1. Click the added “new external device” to select it, and click “Show Info.”
2. In the “Device Name” field, enter “V-Synth GT” and close the dialog box.
4
Connect the up/down arrows that indicate input/output ports as follows.
1. Using the mouse, drag the up/down arrows of the originally shown
“V-Synth GT” to connect them to the up/down arrows of the newly
added “V-Synth GT.”
5
Verify that MIDI transmission/reception is occurring correctly.
1. Click “Test Setup.” The mouse cursor will change to the shape of a
musical note.
2. Click the newly added V-Synth GT. If the sound generator produces
sound, the settings have been made correctly.
The following step will cause the sound generator to produce a fairly loud sound,
so please turn down the volume of the sound generator before you continue.
6
Click “Test Setup” once again to finish the test.
1. Close the Audio MIDI Setup dialog box to finish the settings.
This completes the MIDI input/output settings.
5
T.O.M.S. Sound & Music
(Pty)Ltd.
2 ASTRON ROAD DENVER
JOHANNESBURG ZA 2195,
SOUTH AFRICA
TEL: (011)417 3400
FAX: (011)417 3462
Paul Bothner(PTY)Ltd.
Royal Cape Park, Unit 24
Londonderry Road, Ottery 7800
Cape Town, SOUTH AFRICA
TEL: (021) 799 4900
ASIA
CHINA
Roland Shanghai Electronics
Co.,Ltd.
5F. No.1500 Pingliang Road
Shanghai 200090, CHINA
TEL: (021) 5580-0800
Roland Shanghai Electronics
Co.,Ltd.
(BEIJING OFFICE)
10F. No.18 3 Section Anhuaxili
Chaoyang District Beijing
100011 CHINA
TEL: (010) 6426-5050
HONG KONG
When you need repair service, call your nearest Roland Service Center
or authorized Roland distributor in your country as shown below.
PHILIPPINES
CURACAO
URUGUAY
NORWAY
JORDAN
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
TEL: (02) 899 9801
Zeelandia Music Center Inc.
Orionweg 30
Curacao, Netherland Antilles
TEL:(305)5926866
Todo Musica S.A.
Francisco Acuna de Figueroa
1771
C.P.: 11.800
Montevideo, URUGUAY
TEL: (02) 924-2335
Roland Scandinavia Avd.
Kontor Norge
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
TEL: 2273 0074
MUSIC HOUSE CO. LTD.
FREDDY FOR MUSIC
P. O. Box 922846
Amman 11192 JORDAN
TEL: (06) 5692696
VENEZUELA
POLAND
Instrumentos Musicales
Allegro,C.A.
Av.las industrias edf.Guitar
import
#7 zona Industrial de Turumo
Caracas, Venezuela
TEL: (212) 244-1122
ROLAND POLSKA SP. Z O.O.
UL. Gibraltarska 4.
PL-03 664 Warszawa
POLAND
TEL: (022) 679 4419
EASA HUSAIN AL-YOUSIFI
& SONS CO.
Abdullah Salem Street,
Safat, KUWAIT
TEL: 243-6399
SINGAPORE
Instrumentos Fernando Giraldez
Calle Proyecto Central No.3
Ens.La Esperilla
Santo Domingo,
Dominican Republic
TEL:(809) 683 0305
TAIWAN
ECUADOR
ROLAND TAIWAN
ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung
Shan N.Road Sec.2, Taipei,
TAIWAN, R.O.C.
TEL: (02) 2561 3339
Mas Musika
Rumichaca 822 y Zaruma
Guayaquil - Ecuador
TEL:(593-4)2302364
THAILAND
Theera Music Co. , Ltd.
330 Soi Verng NakornKasem,
New Road, Sumpantawongse,
Bangkok 10100, THAILAND
TEL: (02) 224-8821
AUSTRALIA/
NEW ZEALAND
AUSTRALIA/
NEW ZEALAND
Roland Corporation
Australia Pty.,Ltd.
CENTRAL/LATIN
AMERICA
A&B Music Supplies LTD
12 Webster Industrial Park
Wildey, St.Michael, Barbados
TEL: (246)430-1100
INDIA
BRAZIL
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra
Mahalaxmi Flats Compound
Off. Dr. Edwin Moses Road,
Mumbai-400011, INDIA
TEL: (022) 2493 9051
Roland Brasil Ltda.
Rua San Jose, 780 Sala B
Parque Industrial San Jose
Cotia - Sao Paulo - SP, BRAZIL
TEL: (011) 4615 5666
MALAYSIA
Roland Asia Pacific Sdn. Bhd.
45-1, Block C2, Jalan PJU 1/39,
Dataran Prima, 47301 Petaling
Jaya, Selangor, MALAYSIA
TEL: (03) 7805-3263
HONDURAS
Almacen Pajaro Azul S.A. de C.V.
BO.Paz Barahona
3 Ave.11 Calle S.O
San Pedro Sula, Honduras
TEL: (504) 553-2029
Musique & Son
Z.I.Les Mangle
97232 Le Lamantin
Martinique F.W.I.
TEL: 596 596 426860
BARBADOS
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: (02) 3486-8855
Casa Instrumental
Calzada Roosevelt 34-01,zona 11
Ciudad de Guatemala
Guatemala
TEL:(502) 599-2888
MARTINIQUE
Parsons Music Ltd.
8th Floor, Railway Plaza, 39
Chatham Road South, T.S.T,
Kowloon, HONG KONG
TEL: 2333 1863
KOREA
GUATEMALA
For Australia
Tel: (02) 9982 8266
For New Zealand
Tel: (09) 3098 715
ARGENTINA
PT Citra IntiRama
J1. Cideng Timur No. 15J-150
Jakarta Pusat
INDONESIA
TEL: (021) 6324170
EL SALVADOR
OMNI MUSIC
75 Avenida Norte y Final
Alameda Juan Pablo II,
Edificio No.4010 San Salvador,
EL SALVADOR
TEL: 262-0788
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
Tom Lee Music Co., Ltd.
Service Division
22-32 Pun Shan Street, Tsuen
Wan, New Territories,
HONG KONG
TEL: 2415 0911
INDONESIA
DOMINICAN REPUBLIC
SWEE LEE MUSIC
COMPANY PTE. LTD.
150 Sims Drive,
SINGAPORE 387381
TEL: 6846-3676
Instrumentos Musicales S.A.
Av.Santa Fe 2055
(1123) Buenos Aires
ARGENTINA
TEL: (011) 4508-2700
CHILE
Comercial Fancy II S.A.
Rut.: 96.919.420-1
Nataniel Cox #739, 4th Floor
Santiago - Centro, CHILE
TEL: (02) 688-9540
COLOMBIA
Centro Musical Ltda.
Cra 43 B No 25 A 41 Bododega 9
Medellin, Colombia
TEL: (574)3812529
COSTA RICA
JUAN Bansbach Instrumentos
Musicales
Ave.1. Calle 11, Apartado 10237,
San Jose, COSTA RICA
TEL: 258-0211
Gigamusic SARL
10 Rte De La Folie
97200 Fort De France
Martinique F.W.I.
TEL: 596 596 715222
MEXICO
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico
D.F. MEXICO
TEL: (55) 5668-6699
NICARAGUA
Bansbach Instrumentos
Musicales Nicaragua
Altamira D'Este Calle Principal
de la Farmacia 5ta.Avenida
1 Cuadra al Lago.#503
Managua, Nicaragua
TEL: (505)277-2557
PANAMA
SUPRO MUNDIAL, S.A.
Boulevard Andrews, Albrook,
Panama City, REP. DE
PANAMA
TEL: 315-0101
PARAGUAY
Distribuidora De
Instrumentos Musicales
J.E. Olear y ESQ. Manduvira
Asuncion PARAGUAY
TEL: (595) 21 492147
PERU
Audionet
Distribuciones Musicales SAC
Juan Fanning 530
Miraflores
Lima - Peru
TEL: (511) 4461388
TRINIDAD
AMR Ltd
Ground Floor
Maritime Plaza
Barataria Trinidad W.I.
TEL: (868) 638 6385
If you’re using the V-Synth GT from within software
EUROPE
AUSTRIA
Roland Elektronische
Musikinstrumente HmbH.
Austrian Office
Eduard-Bodem-Gasse 8,
A-6020 Innsbruck, AUSTRIA
TEL: (0512) 26 44 260
BELGIUM/FRANCE/
HOLLAND/
LUXEMBOURG
Roland Central Europe N.V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
TEL: (014) 575811
CROATIA
ART-CENTAR
Degenova 3.
HR - 10000 Zagreb
TEL: (1) 466 8493
CZECH REP.
CZECH REPUBLIC
DISTRIBUTOR s.r.o
Voctárova 247/16
CZ - 180 00 PRAHA 8,
CZECH REP.
TEL: (2) 830 20270
DENMARK
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
TEL: 3916 6200
FINLAND
Roland Scandinavia As, Filial
Finland
Elannontie 5
FIN-01510 Vantaa, FINLAND
TEL: (0)9 68 24 020
GERMANY
Roland Elektronische
Musikinstrumente HmbH.
Oststrasse 96, 22844
Norderstedt, GERMANY
TEL: (040) 52 60090
GREECE/CYPRUS
STOLLAS S.A.
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
HUNGARY
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint,
HUNGARY
TEL: (23) 511011
IRELAND
Roland Ireland
G2 Calmount Park, Calmount
Avenue, Dublin 12
Republic of IRELAND
TEL: (01) 4294444
ITALY
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
PORTUGAL
KUWAIT
LEBANON
Roland Iberia, S.L.
Portugal Office
Cais das Pedras, 8/9-1 Dto
4050-465, Porto, PORTUGAL
TEL: 22 608 00 60
Chahine S.A.L.
Gerge Zeidan St., Chahine
Bldg., Achrafieh, P.O.Box:
16-5857
Beirut, LEBANON
TEL: (01) 20-1441
ROMANIA
OMAN
FBS LINES
Piata Libertatii 1,
535500 Gheorgheni,
ROMANIA
TEL: (266) 364 609
TALENTZ CENTRE L.L.C.
Malatan House No.1
Al Noor Street, Ruwi
SULTANATE OF OMAN
TEL: 2478 3443
RUSSIA
QATAR
MuTek
Dorozhnaya ul.3,korp.6
117 545 Moscow, RUSSIA
TEL: (095) 981-4967
Al Emadi Co. (Badie Studio &
Stores)
P.O. Box 62, Doha, QATAR
TEL: 4423-554
SLOVAKIA
SAUDI ARABIA
DAN Acoustic s.r.o.
Povazská 18.
SK - 940 01 Nové Zámky
TEL: (035) 6424 330
SPAIN
aDawliah Universal
Electronics APL
Corniche Road, Aldossary
Bldg., 1st Floor, Alkhobar,
SAUDI ARABIA
Roland Iberia, S.L.
Paseo García Faria, 33-35
08005 Barcelona SPAIN
TEL: 93 493 91 00
P.O.Box 2154, Alkhobar 31952
SAUDI ARABIA
TEL: (03) 898 2081
SWEDEN
SYRIA
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (0)8 702 00 20
SWITZERLAND
Roland (Switzerland) AG
Landstrasse 5, Postfach,
CH-4452 Itingen,
SWITZERLAND
TEL: (061) 927-8383
Technical Light & Sound
Center
Rawda, Abdul Qader Jazairi St.
Bldg. No. 21, P.O.BOX 13520,
Damascus, SYRIA
TEL: (011) 223-5384
TURKEY
ZUHAL DIS TICARET A.S.
Galip Dede Cad. No.37
Beyoglu - Istanbul / TURKEY
TEL: (0212) 249 85 10
U.A.E.
UKRAINE
Zak Electronics & Musical
Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg.,
No. 14, Grand Floor, Dubai,
U.A.E.
TEL: (04) 3360715
EURHYTHMICS Ltd.
P.O.Box: 37-a.
Nedecey Str. 30
UA - 89600 Mukachevo,
UKRAINE
TEL: (03131) 414-40
UNITED KINGDOM
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
UNITED KINGDOM
TEL: (01792) 702701
MIDDLE EAST
BAHRAIN
Moon Stores
No.16, Bab Al Bahrain Avenue,
P.O.Box 247, Manama 304,
State of BAHRAIN
TEL: 17 211 005
IRAN
MOCO INC.
No.41 Nike St., Dr.Shariyati Ave.,
Roberoye Cerahe Mirdamad
Tehran, IRAN
TEL: (021) 285-4169
NORTH AMERICA
CANADA
Roland Canada Ltd.
(Head Office)
5480 Parkwood Way Richmond
B. C., V6V 2M4 CANADA
TEL: (604) 270 6626
Roland Canada Ltd.
(Toronto Office)
170 Admiral Boulevard
Mississauga On L5T 2N6
CANADA
TEL: (905) 362 9707
U. S. A.
Roland Corporation U.S.
5100 S. Eastern Avenue
Los Angeles, CA 90040-2938,
U. S. A.
TEL: (323) 890 3700
ISRAEL
Halilit P. Greenspoon & Sons
Ltd.
8 Retzif Ha'aliya Hashnya St.
Tel-Aviv-Yafo ISRAEL
TEL: (03) 6823666
As of November 1, 2006 (ROLAND)
1
Use a USB cable to connect the V-Synth GT to your Mac, and then start
up your software.
2
In the Audio Driver settings of the software you’re using, choose “Roland V-Synth GT 44.1 kHz.”
* Avoid touching or scratching the shiny underside (encoded surface) of the disc. Damaged or dirty CD-ROM discs may not be read properly.
Keep your discs clean using a commercially available CD cleaner.
3
In the MIDI Driver settings of the software you’re using, choose V-Synth GT.
* Microsoft and Windows are registered trademarks of Microsoft Corporation.
* Windows Vista is a trademark of Microsoft Corporation.
For details on how to make these settings, refer to the user’s guide for the
software you’re using.
* Windows® is known officially as: “Microsoft® Windows® operating system.”
* The screen shots in this document are used in compliance with the guidelines of the Microsoft Corporation.
* Apple and Macintosh are registered trademarks of Apple, Inc.
* Mac OS is a trademark of Apple, Inc.
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
* In the interest of product improvement, the specifications and/or contents of this package are subject to change without prior notice.
Please also read the Readme_E.htm provided on the V-Synth GT Driver CD-ROM.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement