ActivBoard (100 300 500) Installation Guide ENG (6.7 Мб, Acrobat Reader)

ActivBoard (100 300 500) Installation Guide ENG (6.7 Мб, Acrobat Reader)
Installation Guide
Copyright Information
TP1819 Issue 03 © 2013 Promethean Limited. All rights reserved.
All software, resources, drivers and documentation supplied in the Promethean ActivInspire download are copyright
Promethean Ltd 2013. Promethean grants a license to install and use Promethean ActivInspire software, including
any resources, drivers and documentation supplied in the download. Refer to the licence agreement for information
about the terms and conditions of this licence.
Promethean is owner of a number of trademarks in several jurisdictions across the world. The Promethean products
documented in this guide include aspects which are protected under their respective patent, copyright, design
copyright, registered design and trademark laws.
Windows, Windows XP, Excel and PowerPoint are registered trademarks or trademarks of Microsoft Corporation
in the United States and other countries.
All other trademarks remain the property of their respective owners.
This guide is distributed with the product. It may only be reproduced for use within the institution in which the
product is used. For use outside of your institution, no part of this guide may be reproduced, transmitted, stored in a
retrieval system or translated into any other language without the prior permission of Promethean Limited.
Please note that the content in this guide is protected under copyright law. Although every care has been taken in
the compilation of this guide, Promethean Limited accepts no responsibility for errors or omissions, or for damages
resulting from the use of information contained within the following pages.
General Safety Instructions
For your safety, read this guide before installation. Incorrect handling and installation
could result in personal injury, property damage or damage to the components. Keep this
installation guide at hand for future reference.
Refer to the Safety Instructions for your ActivBoard System and projector.
Follow the instructions in these documents.
Explanation of Symbols
The warning marks shown below are used throughout this installation guide to prevent
personal injury or property damage. Make sure you understand these warnings when reading
this installation guide.
!
This symbol indicates information that, if ignored,
could possibly result in personal injury or even
death due to incorrect handling.
!
This symbol indicates information that, if ignored,
could possibly result in personal injury or physical
damage due to incorrect handling.
WARNING
CAUTION
Symbol indicating an action that should be done.
Symbol indicating an action that must not be done.
!
Safety Precautions for Installation
WARNING
The installation work should be performed by a qualified installer. Attempting to
install the product without relevant experience is done so at your own risk. Incorrect
or incomplete installation could result in personal injury, property damage or
product failure.
The weight of the ActivBoard, and strength of the mounting wall is required to be
confirmed prior to installation.
Ensure precautions are taken to ensure the wall strength and fixings are suitable.
TP1819 ActivBoard Installation Guide
3
Welcome
Thank you for purchasing an ActivBoard from
Promethean. We recommend using your
ActivBoard with our latest software solutions:
• ActivInspire - Fully featured software that
combines the best of our award-winning
programs in one package, delivering the best
software for education technology integration,
www.prometheanplanet.com/ActivInspire
• Promethean ActivOffice - Software plug-in
that enables certain ActivInspire features to be
used natively in PowerPoint® presentations,
www.prometheanplanet.com/
PrometheanActivOffice
• Promethean Applications - Standalone
applications that enable multi-user ‘Pen and
Touch’ interaction with the ActivBoard 500
Pro,
www.prometheanplanet.com/
PrometheanApplications
Acquire thousands of great lessons, resources
and teaching ideas from our free online
community, Promethean Planet. While you’re
there, enroll in one of our ActivLearning
courses.
Just create a user account and you will have
access to a wealth of teaching resources and
courses that will help you achieve your teaching
and learning goals.
www.prometheanplanet.com/activlearning
Part of the Activclassroom, your Activboard
along with ActivInspire software, was designed
to be an innovative and integrated whole
group learning environment which encourages
active student participation in lessons.
For more information on the ActivClassroom
by Promethean and other products available
please visit
www.prometheanworld.com.
Components supplied and minimum specifications stated have been tested and are required for
optimal performance. Use of components not supplied by Promethean, or not meeting minimum
specifications, may impact performance and affect warranty. Contact your Promethean partner or
visit www.PrometheanKB.com for more information.
Contents
4
100 Series
5
300 Series
6
300 Pro Series
11
500 Pro Series
17
TP1819 ActivBoard Installation Guide
©2013 Promethean Ltd
!
100 Series Safety Information
WARNING
The ActivBoard 100 series are USB powered therefore do not require an external
Power Supply Unit. Power supply Units are only required for use in wireless mode. The
Wireless Upgrade Kit is available separately- please contact your Promethean Partner
for more information.
The ActivBoard 100 series are powered, when operated in wireless mode, by a universal
input power supply unit, branded Promethean and type FW7650L/05.
This is the only approved power supply unit. Do not connect any other power supply unit to
the ActivBoard 100 series. Failure to do this could result in personal injury, property
damage or product failure.
Inspect the power supply unit for physical damage to the casing before use. If damage
is apparent, take care to avoid contact with any potentially live parts. Disconnect the
power supply unit from the mains supply at the wall socket and contact an authorised
Promethean service agent for advice. Failure to do this could result in personal injury
or product failure.
Never open or modify the power supply or mains lead. It does not contain any user
serviceable parts.
Attempting to open or modify the power supply or mains lead could result in
personal injury, property damage or product failure.
Do not connect the power supply unit if you are unsure of the electrical compatibility
of your equipment. Please contact Promethean or an authorised Promethean service
agent for advice before attempting to connect the power supply unit to the mains
supply if you are in any doubt. Failure to do this could result in personal injury or
product failure.
The power supply unit may be supplied with more than one interchangeable plug or
adapter and mains leads. This is to accommodate countries with more than one type of
mains outlet socket. Only use the mains lead, or adapter, which is compatible with
your mains outlet socket. Failure to do this could result in personal injury, property
damage or product failure.
The socket outlet should be installed near the equipment and should be easily accessible.
Failure to do this could result in personal injury.
en v ironmen ta l consider at ions :
Operating Temperature Range: 0°C to +50°C (32°F to 122°F)
Storage Temperature Range: -20°C to +70°C (-4°F to 158°F)
Humidity (non condensing): 0% to 90%
Additional support and information on Promethean products can be found on Promethean’s
knowledgebase. www.prometheankb.com
TP1819 ActivBoard Installation Guide
5
Box Contents
16-22kg
35-49lb
2 X ActivPens
USB Data Cable
5m (16ft)
Wall Mounting Brackets
User Guide
ActivBoard
6
TP1819 ActivBoard Installation Guide
©2013 Promethean Ltd
!
Installation
CAUTION
685mm
(27in)
1175mm
(46.26in)
150mm (6”)
587.5mm
600 - 950mm
(23.1in)
(23.6 - 37.4in)
1
2
TP1819 ActivBoard Installation Guide
7
Set-Up
2.4
ActivHub
FW7650L/05
DT 6018
/ DPS-60SB A
Calibration
A
8
10s
TP1819 ActivBoard Installation Guide
B
©2013 Promethean Ltd
B
A B
B
x5
=C
TP1819 ActivBoard Installation Guide
9
C
C
C
C
x25
Getting Started
www.prometheanplanet.com/activinspire
10
TP1819 ActivBoard Installation Guide
©2013 Promethean Ltd
!
300 Series Safety Information
WARNING
The ActivBoard 300 series are USB powered therefore do not require an external
Power Supply Unit. Power supply Units are only required for use in wireless mode. The
Wireless Upgrade Kit is available separately- please contact your Promethean Partner
for more information.
The ActivBoard 300 series are powered, when operated in wireless mode, by a universal
input power supply unit, branded Promethean and type FW7650L/05.
This is the only approved power supply unit. Do not connect any other power supply unit to
the ActivBoard 300 series. Failure to do this could result in personal injury, property
damage or product failure.
Inspect the power supply unit for physical damage to the casing before use. If damage
is apparent, take care to avoid contact with any potentially live parts. Disconnect the
power supply unit from the mains supply at the wall socket and contact an authorised
Promethean service agent for advice. Failure to do this could result in personal injury
or product failure.
Never open or modify the power supply or mains lead. It does not contain any user
serviceable parts.
Attempting to open or modify the power supply or mains lead could result in
personal injury, property damage or product failure.
Do not connect the power supply unit if you are unsure of the electrical compatibility
of your equipment. Please contact Promethean or an authorised Promethean service
agent for advice before attempting to connect the power supply unit to the mains
supply if you are in any doubt. Failure to do this could result in personal injury or
product failure.
The power supply unit may be supplied with more than one interchangeable plug or
adapter and mains leads. This is to accommodate countries with more than one type of
mains outlet socket. Only use the mains lead, or adapter, which is compatible with
your mains outlet socket. Failure to do this could result in personal injury, property
damage or product failure.
The socket outlet should be installed near the equipment and should be easily accessible.
Failure to do this could result in personal injury.
en v ironmen ta l consider at ions :
Operating Temperature Range: 0°C to +50°C (32°F to 122°F)
Storage Temperature Range: -20°C to +70°C (-4°F to 158°F)
Humidity (non condensing): 0% to 90%
Additional support and information on Promethean products can be found on Promethean’s
knowledgebase. www.prometheankb.com
TP1819 ActivBoard Installation Guide
11
Box Contents
24.5-31kg
54-68lb
2 X ActivPens
USB Data Cable
5m (16ft)
Wall Mounting Brackets
User Guide
ActivBoard
12
TP1819 ActivBoard Installation Guide
©2013 Promethean Ltd
!
Installation
CAUTION
685mm
(27in)
1175mm
(46.26in)
150mm (6”)
587.5mm
600 - 950mm
(23.1in)
(23.6 - 37.4in)
1
2
TP1819 ActivBoard Installation Guide
13
Set-Up
2.4
ActivHub
FW7650L/05
DT 6018
/ DPS-60SB A
Calibration
A
14
10s
TP1819 ActivBoard Installation Guide
B
©2013 Promethean Ltd
B
A B
B
x5
=C
TP1819 ActivBoard Installation Guide
15
C
C
C
C
x25
Getting Started
www.prometheanplanet.com/activinspire
16
TP1819 ActivBoard Installation Guide
©2013 Promethean Ltd
!
300 Pro Series Safety Information
WARNING
The ActivBoard 300 Pro series are powered by a universal input power supply unit, branded
Promethean and type DT6018 or DPS-60SB A.
This is the only approved power supply unit. Do not connect any other power supply unit
to the ActivBoard 300 Pro series. Failure to do this could result in personal injury,
property damage or product failure.
Inspect the power supply unit for physical damage to the casing before use. If damage
is apparent, take care to avoid contact with any potentially live parts. Disconnect the
power supply unit from the mains supply at the wall socket and contact an authorised
Promethean service agent for advice. Failure to do this could result in personal injury
or product failure.
The ActivBoard 300 Pro series can also be operated in wireless mode. The Wireless
Upgrade Kit is available separately- please contact your Promethean Partner for more
information.
Never open or modify the power supply or mains lead. It does not contain any user
serviceable parts.
Attempting to open or modify the power supply or mains lead could result in
personal injury, property damage or product failure.
Do not connect the power supply unit if you are unsure of the electrical compatibility
of your equipment. Please contact Promethean or an authorised Promethean service
agent for advice before attempting to connect the power supply unit to the mains
supply if you are in any doubt. Failure to do this could result in personal injury or
product failure.
The power supply unit may be supplied with more than one interchangeable plug or
adapter and mains leads. This is to accommodate countries with more than one type of
mains outlet socket. Only use the mains lead, or adapter, which is compatible with
your mains outlet socket. Failure to do this could result in personal injury, property
damage or product failure.
The socket outlet should be installed near the equipment and should be easily accessible.
Failure to do this could result in personal injury.
en v ironmen ta l consider at ions :
Operating Temperature Range: 0°C to +50°C (32°F to 122°F)
Storage Temperature Range: -20°C to +70°C (-4°F to 158°F)
Humidity (non condensing): 0% to 90%
Additional support and information on Promethean products can be found on Promethean’s
knowledgebase. www.prometheankb.com
TP1819 ActivBoard Installation Guide
17
24.5-31kg
Box Contents
54-68lb
2 X ActivPensTeacher
2 X ActivPensStudent
USB Data Cable
5m (16ft)
1 AMPLIFIER PSU
DT6018 or DPS-60SB A
Wall Mounting Brackets
User Guide
ActivBoard
18
TP1819 ActivBoard Installation Guide
©2013 Promethean Ltd
!
Installation
CAUTION
685mm
(27in)
1175mm
(46.26in)
150mm (6”)
587.5mm
600 - 950mm
(23.1in)
(23.6 - 37.4in)
1
2
TP1819 ActivBoard Installation Guide
19
Set-Up
2.4
ActivHub
18V
60W PSU
DT 6018 / DPS-60SB A
20
TP1819 ActivBoard Installation Guide
DT 6018 / DPS-60SB A
©2013 Promethean Ltd
Calibration
A
B
10s
B
B
TP1819 ActivBoard Installation Guide
21
A B
x5
=C
C
22
C
TP1819 ActivBoard Installation Guide
©2013 Promethean Ltd
C
C
x25
TP1819 ActivBoard Installation Guide
23
Getting Started
www.prometheanplanet.com/activinspire
24
TP1819 ActivBoard Installation Guide
©2013 Promethean Ltd
!
500 Pro Series Safety Information
WARNING
The ActivBoard 500 Pro series are powered by a universal input power supply unit, branded
Promethean and type DPS-90SB A.
This is the only approved power supply unit. Do not connect any other power supply unit
to the ActivBoard 500 Pro series. Failure to do this could result in personal injury,
property damage or product failure.
Inspect the power supply unit for physical damage to the casing before use. If damage
is apparent, take care to avoid contact with any potentially live parts. Disconnect the
power supply unit from the mains supply at the wall socket and contact an authorised
Promethean service agent for advice. Failure to do this could result in personal injury
or product failure.
Never open or modify the power supply or mains lead. It does not contain any user
serviceable parts.
Attempting to open or modify the power supply or mains lead could result in
personal injury, property damage or product failure.
Do not connect the power supply unit if you are unsure of the electrical compatibility
of your equipment. Please contact Promethean or an authorised Promethean service
agent for advice before attempting to connect the power supply unit to the mains
supply if you are in any doubt. Failure to do this could result in personal injury or
product failure.
The power supply unit may be supplied with more than one interchangeable plug or
adapter and mains leads. This is to accommodate countries with more than one type of
mains outlet socket. Only use the mains lead, or adapter, which is compatible with
your mains outlet socket. Failure to do this could result in personal injury, property
damage or product failure.
The socket outlet should be installed near the equipment and should be easily accessible.
Failure to do this could result in personal injury.
en v ironmen ta l consider at ions :
Operating Temperature Range: 0°C to +40°C (32°F to 104°F)
Storage Temperature Range: -20°C to +60°C (-4°F to 140°F)
Humidity (non condensing): 10% to 90%
Additional support and information on Promethean products can be found on Promethean’s
knowledgebase. www.prometheankb.com
TP1819 ActivBoard Installation Guide
25
Box Contents
40-48kg
88-106lb
2 X ActivPensTeacher
2 X ActivPensStudent
USB Data Cable
3m (9.8ft)
1 AMPLIFIER PSU
DPS-90SB A
Wall Mounting Brackets
User Guide
ActivBoard
26
TP1819 ActivBoard Installation Guide
©2013 Promethean Ltd
!
Installation
CAUTION
685mm
(27in)
1175mm
(46.26in)
150mm (6”)
587.5mm
600 - 950mm
(23.1in)
(23.6 - 37.4in)
1
2
TP1819 ActivBoard Installation Guide
27
Set Up
2x
DPS-90GB
A
DPS-90GB
A or 153413
igeny szerint
28
TP1819 ActivBoard Installation Guide
©2013 Promethean Ltd
Calibration
A
B
10s
B
B
TP1819 ActivBoard Installation Guide
29
A B
x5
=C
C
30
C
TP1819 ActivBoard Installation Guide
©2013 Promethean Ltd
C
C
x25
TP1819 ActivBoard Installation Guide
31
Getting Started
www.prometheanplanet.com/activinspire
32
TP1819 ActivBoard Installation Guide
©2013 Promethean Ltd
Notes
TP1819 ActivBoard Installation Guide
33
Technical support
www.prometheankb.com
TP1819 10/13 V3.0_MULTI
©2013 Promethean Ltd. All Rights Reserved. Products are subject to availability by country. Product Specifications are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement