50281 2 ifs vr1100 series ds fin
/ Fiber Transmission
IFS® Line Specifications
Video
Video Output:
Bandwidth:
Differential Gain:
Differential Phase:
Tilt:
Signal-to-Noise Ratio (SNR):
VR1100 Series
1 volt pk-pk (AGC controlled)
5 Hz - 10 MHz (At 6 dB Attenuation)
<5%
<5°
<1%
>55 dB at 10 dB Attn.
>60 dB at 7 dB Attn.
IFS AM Video Receiver
Wavelength
850 nm, Multimode
with Automatic
Gain Control (AGC)
Receiver Sensitivity
1 µw (-30 dBm)
Transmitter Output
25 µw (-16 dBm)
Number Of Fibers
1
Connectors
Optical:
Power:
OVERVIEW
Video:
ST
Terminal Block STANDARD
with Screw Clamps
FEATURES
BNC (Gold Plated Center-Pin)
The IFS VR1100 Series video receiver detects an AM video signal
• AM Video
Electrical
& cable.
Mechanical
• NTSC, PAL, SECAM Compatible
on one multimode
fiber optic
The receiver utilizes automatic
Power:
• Full Color Compatibility
gain control (AGC)
and is compatible with the IFS VT1101M,
Surface
Mount:
12
VDC
@
150
mA
• Full Range Automatic Gain Control (AGC)
VT1101M-AC, and VT1001 Series transmitters. Plug-and-play
Rack:
From Rack
design ensures ease of installation requiring no electrical or optical
• No In-field Electrical or Optical Adjustments Required
Max. RG59 Cable Length:
750 ft.
adjustments. The receiver incorporates power and AGC status
• Power and AGC Status Indicating LED’s to Monitor System
Current Protection:
Automatic Resettable
Solid-State Current Limiters
indicating LED’sCircuit
for monitoring
proper
system
operation.
The
Performance
Board:
Meets IPC Standard
module is available
either stand-alone
• Hot-Swappable Rack Modules
Sizein(in./cm.)
(LxWxH)or rack mount version.
• Automatic
Resettable
Fuses on all Power Lines
Surface Mount:
7.0 x 4.9 x 1.0 in.,
10.7 x 8.9
x 2.5 cm
• Comprehensive
Rack Mount:
7.7 x 5.0 x 1.0 in.,
17.8 x 12.5 xLifetime
2.5 cmWarranty
Shipping Weight:
< 2 lbs./0.9 kg
APPLICATION EXAMPLES
Environmental
MTBF:
• CCTV (Fixed Video)
> 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†
Operating Temp:
Storage Temp:
Relative Humidity:
SYSTEM DESIGN
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
System Design
er J
up to 2.5 miles
(4 km)
VT1101M
ifs
Video
(Coax)
1 Fiber
62.5/125µm MM
VR1100
ifs
International
Fiber
Video
Systems
Incorporated
203.426.1180
(Coax)
n
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
AGC Video Receiver (850 nm)
1
14 dB
2.5 miles (4 km)
VR1100 Series is compatible with:
VT1101M, VT1101-AC, AND VT1001
Series Transmitters
interlogix.com
VR1100 Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS AM Video Receiver with Automatic Gain Control (AGC)
Ordering Information
Multimode 62.5/125µm**
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
VR1100
AGC Video Receiver (850 nm)
1
14 dB
2.5 miles (4 km)
VR1100 Series is compatible
with: VT1101M, VT1101AC, AND VT1001 Series
Transmitters
Accessories ♦
PS12VDC1.5A-U
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
Specifications
Video
GE
Security
Video Output:
1 volt pk-pk (AGC controlled)
Bandwidth:
5 Hz - 10 MHz (At 6 dB Attenuation)
Differential Gain:
<5%
Differential Phase:
<5°
Tilt:
<1%
Signal-to-Noise Ratio (SNR):
>55 dB at 10 dB Attn.
>60 dB at 7 dB Attn.
Asia
T 852-2907-8108
F 852-2142-5063
850 nm, Multimode
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Wavelength
Receiver Sensitivity
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
1 µw (-30 dBm)
Europe
T 44-113-238-1668
F 44-113-253-8121
25 µw (-16 dBm)
Latin America
T 305-593-4301
F 305-593-4300
Transmitter Output
Number Of Fibers
1
Connectors
Optical:
ST
Power:
Terminal Block with Screw Clamps
Video:
BNC (Gold Plated Center-Pin)
Electrical & Mechanical
gesecurity.com/ifs
Specifications subject to
change without notice
Agency Compliance
© 2008 General Electric Company
Complies
with
FDA Performance
All Rights
Reserved
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Power:
Surface Mount:
12 VDC @ 150 mA
Rack:
From Rack
Max. RG59 Cable Length
750 ft.
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount:
7.0 x 4.9 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount:
7.7 x 5.0 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight:
< 2 lbs./0.9 kg
Environmental
MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C
Storage Temp:
-40° C to +85° C
Relative Humidity:
0% to 95% (non-condensing)
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Ordering Information
Part Number
D1010
interlogix.com
D1010WDMA✧
Multimode
D1010WDMB
62.5/125µm**
Specifications subject
to change without
notice.
D1020
© 2013 United Technologies Corporation
All rights
reserved.
D1030
Interlogix is part of UTC Building
& Industrial
Systems, ✧
Single Mode
D1030WDMA
a unit of United
Technologies Corporation.
9/125µm
D1030WDMB
Accessories♦
Options
De
RS
RS
RS
RS
RS
RS
RS
VR1100 Series
PS-12VDC 12 Volt DC Plu
PS-12VDC-230 12 Volt D
Add ‘-R3’ to Model Num
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement