Catalogue Sheet: CX5000R Series

Catalogue Sheet: CX5000R Series
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
Supply and install the Ready-Lite® CX5000R Series Exit Sign. The CX5000R exit shall be recessed mount.
The equipment shall operate with universal AC input voltage of 120, 277 or 347VAC at less than 1.5W and
universal two wire DC input voltage from 6VDC to 24VDC at less than 1.5W. The face shall be constructed
of extruded aluminum and have an overlapping trim allowing for installation in any location. The faceplate
shall come standard with knockout chevrons. The recessed back box shall be of rugged steel construction.
The light source shall be light emitting diodes (LED). Red LED technology shall be ALINGAP. The LED lamps
shall provide illumination in normal and emergency operation and shall be mounted inside the exit housing.
An LED sensitive diffuser shall be mounted behind the legend to provide the 6” high by 3/4” stroke letters
with even illumination.
The Exit Sign in a Self-powered configuration shall be equipped with a Nickel-Cadmium battery and shall stay
illuminated during emergency operation for at least 90 minutes upon AC failure.
The Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No.141
The equipment shall be Ready-Lite®Model:
.
WIRE GUARDS
460.0091-RL
wall mount
DIMENSIONS
Dimensions are approximate and subject to change.
2-1/2” [6.5 cm]
12-3/4” [32.4 cm]
7-1/2” [19 cm]
8-7/8” [22.7 cm]
2-1/4” [5.7 cm]
CX5000R SERIES
Recessed Exit Sign
FEATURES
• Extruded aluminum faceplate with
overlapping trim is standard
• Universal, field-selectable chevrons
(knockout)
• Long-life, energy-efficient ALINGAP LED
light source
• Indirect refractive technology provides
bright, even illumination
• Normal AC and emergency DC
operation – 120 to 347V universal AC
input; 6 to 24V two-wire DC input
• Energy efficient – consumes less than
3.5W in AC or DC mode
• Nickel-Cadmium battery provides at
least 90 minutes of emergency
operation in DC mode
• CSA certified, meets or exceeds
CSA 22.2 No. 141 requirements
14-3/4” [37.5 cm]
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC/ standard DC, red
120/277/347VAC
less than 1.5W
6 to 24VDC
less than 1.5W
AC/ special DC, red
120/277/347VAC
less than 3W
36 or 48 or 120VDC
less than 2.5W
minimum 90 minutes
Self-powered, red
120 to 347VAC
less than 3W
nickel-cadmium battery
AC/ standard DC, green
120 to 347VAC
less than 1.5W
6 to 24VDC
less than 1.5W
self-powered, green
120 to 347VAC
less than 3.5W
nickel-cadmium battery
minimum 90 minutes
ORDERING INFORMATION
SERIES
CX5000R= LED aluminum
recessed exit
COLOUR
WH= factory white
BK= black
BA= brushed aluminum
TA= textured aluminum
VOLTAGE
-UL= 120/277/347VAC, 6 to 24VDC
-L120-2W= 120VAC, 120VDC 2 wires
-LU36= 120/277/347VAC - 36VDC
-LU48= 120/277/347VAC - 48VDC
-LU120= 120/277/347VAC - 120VDC
-ISP= self-powered, 120 to 347VAC
OPTIONS
G= green legend
TP= tamper-proof screws*
VRTP= polycarbonate shield and tamper-proof screws*
*990.0119-RL= T
amper-proof bit (sold separately)
EXAMPLE: CX5000RWH-UL
35
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement