singlepointthermostatic

singlepointthermostatic
Water Temperature Control - Single Point of Use
Thermostatic
• Thermal Shutdown Mode
• +/- 2°F Temperature Stability to fixture
• Maximum Temperature Limit Stop
• Maximum Temperature Locking Feature
• Single “sealed for life” Replacement Cartridge
4
Armstrong Hot Water Group, 221 Armstrong Blvd., Three Rivers, MI 49093 – USA Phone: 269-279-3602, Fax: 269-279-3130
armstronginternational.com
Water Temperature Control - Single Point of Use
Thermostatic
Sizing
Water Temperature Control - Single Point of Use - Thermostatic,
features the Rada 215 thermostatic mixing valve which is
designed specifically for installation at or near the final point of
use.
To size a mixing valve for single open outlet applications, simply
match the required flow rate with the available maintained inlet
water pressure. Correlate with required minimum flow rate and
make a selection.
Rada 215 has been designed to offer accurate
temperature control in installations where there are diverse
flow requirements between .5 and 11 gpm (1.9 and 41.6 lpm).
Rada Thermostatic Mixing Valves (gpm)
Model
215
5
10
15
20
4
5
7
8
Pressure Drop (psi)
25
30
9
9
35
40
45
50
10
11
11
12
Min. Flow
CV
.5
1.7
Hot Water Supply
Mixed Flow
Cold Water Supply
System Layout
Thermometer
Isolation Valve
Sink
Strainer
Check Valve
All dimensions and weights are approximate. Use certified print for exact dimensions. Design and materials are subject to change without notice.
Armstrong Hot Water Group, 221 Armstrong Blvd., Three Rivers, MI 49093 – USA Phone: 269-279-3602, Fax: 269-279-3130
armstronginternational.com
5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement