USA 2011 DocuMaster MFC Data Sheet

USA 2011 DocuMaster MFC Data Sheet
Morgana Systems Ltd
3909 Upland Way, Marietta
GA 30066 Georgia
Tel: 866 463 5060
Fax: 770 565 6163
[email protected]
DocuMaster MFC
Highly versatile & multi-tasking with the
intelligent GUI touch screen panel.
With today’s increased demand for high quality finished documents,
Morgana are pleased to introduce the DocuMaster MFC. This is the latest
in the DocuMaster range, designed to eliminate tedious and time
consuming operations by creasing the sheets as part of the feeding and
booklet making operation.
With multiple feed stations, the design allows for feeding of specialised
covers and booklet inside pages from separate feed bins while still allowing
for creasing of cover, centre or all pages of the book. The Documaster MFC
incorporates the new ‘DYNATILT” creasing system which automatically
registers each sheet and adjusts the mechanism to ensure an accurate
crease position every time.
Creasing of covers, centre spreads or indeed all sheets in the book if
needed, is simply programmed into the high definition touch screen control
unit. Simplicity of operation is key to finishing digitally printed work.
Today’s “on demand” culture means run lengths are smaller and
turnaround times are becoming shorter and shorter.
Key Product Features:
• High definition touch panel
• 4 separate feed stations
• Intuitive and easy to use
• Highly versatile separate cover feed & inserting
• Takes stock up to 120lb cover*
• ‘DYNATILT’ Rule and matrix guaranteed for life
• Smart detection - fully automatic electronic paper detection
• Crease without cracking
Controlled by a high definition touch panel, the DocuMaster MFC is given
full instructions as to the book size, amount of pages and crease position
etc. All settings and adjustments are made using the high definition touch
panel so operation couldn’t be simpler.
An alpha numeric memory allows an unlimited number of jobs to be stored
and named as you choose. This makes job recall much easier as you can use
your own job name and numbers for storage.
The DocuMaster MFC is ergonomically designed so that it can be loaded
(on the run) and unloaded very easily from one position. The footprint is
unusually small for a bookletmaking system and it will fit into even the
smallest of printrooms. The DocuMaster MFC utilises the latest advances in
paper feed modules. These modules can be specified as suction feed only
or suction and friction feed to a maximum of 4 separate feed stations. The
paper is fed from these units using a centre reference sheet guide system
and smart detection for sheet integrity.
The heart of the DocuMaster MFC is the new ‘DYNATILT’ creasing rule and
matrix system. Morgana uses stepping motor technology to accurately
position the substrate before creasing; this gives total and consistent
accuracy during operation and the DocuMaster MFC is no exception.
Morgana take creasing one step further with the new ‘DYNATILT’ system
which can with outstanding accuracy align each sheet to make sure it is
square before creasing. Morgana are the only manufacturer offering this
solution today.
With thousands of mechanisms installed throughout the world our creasing
technology is unparalleled in both performance and longevity, which is why
we offer a lifelong guarantee on the rule and matrix.
To ensure booklet integrity an automatically set electronic detector checks
for mis-feed, double sheet and empty feed stations. The unit is fully
automatic and self-calibrating.
Every sheet is checked regardless of stock thickness before being fed into
an accumulating station. In the unlikely event of a double feed the
machine immediately stops. Once the complete set has been gathered it
is released into the stitch-fold-trim unit.
The Square Back system enhances the appearance of finished documents
by creating a square effect finish adding value to the finished job. This
will change the way you and your clients think about finished booklets
because it transforms the book into one that lays flat and appears to be
perfect bound but with the added value of strength because of the
stitches. Quiet in operation the Square Back system can also be used offline to enable work from other devices to be professionally finished.
DocuMaster MFC is the Multi-tasking champion. Use it as a booklet maker,
a creaser or collator to produce 4pp brochures on heavy stock or to give
the perfect bound appearance to pre-produced booklets. The DocuMaster
MFC will happily do them all. Near-line or off-line finishing enables your
print engine to operate at maximum speed. This is often not the case when
on-line finishers are used. Due to the high productivity of the DocuMaster
MFC, work from more than one print engine can be finished.
DocuMaster MFC
Highly versatile & multi-tasking with the
intelligent GUI touch screen panel.
technical specifications
Multi-feed creaser feed system
4 bins (3 suction bins, 1 friction bin)
Minimum sheet size
8.2" x 5.5"
Maximum sheet size
17.7" x 12.5"
Maximum book thickness
23 sheets 0.004" (approx 20lb bond)*
Friction feed bin
Up to 7200 sheets per hour
Stock range
0.004" - 0.014" (20lb bond - 120lb cover approx)*
Suction feed bin
Up to 5000 sheets per hour
Stock range
0.004" - 0.009" (20lb bond - 90lb cover approx)*
Crease module
Number of creases
1 (centre of book) 2 x optional hinge crease
Hinge Range
0.15" - 0.47" from book centre (cover sheet only)
L 68.1" x W 27.9" x H 83.2" (including squareback)
Power requirement
240/115v 50/60hz
Note: the production speed varies according to material size and the number of crease/folds on the sheet
Note: the production speed varies according to material size and the number of crease/folds on the sheet
As part of our continued product improvement plan, specifications and information published here are subject to change without notice.
All specifications are dependent on application, type of stock, temperature, RH and print engine used.
Specifications quoted were measured on uncoated and unprinted stock.
E & OE.
USA DocuMaster MFC data sheet ver 2 - 10/11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF