SF390X
Contents
1.1
1.2
1.3
1.4
1.5
1.6
1.7
General safety instructions
Manufacturer liability
Appliance purpose
Disposal
Identification plate
This user manual
How to read the user manual
2 Description
2.1
2.2
2.3
2.4
General Description
Control panel
Other parts
Available accessories
3 Use
3.1
3.2
3.3
3.4
3.5
3.6
42
42
43
43
43
44
44
44
EN
1 Instructions
45
45
46
46
47
49
Instructions
First use
Using the accessories
Using the oven
Cooking advice
Display
4 Cleaning and maintenance
4.1 Instructions
4.2 Cleaning the surfaces
4.3 Ordinary daily cleaning
4.4 Food stains or residues
4.5 Removing the door
4.6 Cleaning the door glazing
4.7 Removing the internal glass panels
4.8 Cleaning the inside of the oven
4.9 Vapor Clean: assisted oven cleaning (on some models only)
4.10 Pyrolysis: automatic oven cleaning (on some models only)
4.11 Extraordinary maintenance
5 Installation
5.1 Electrical connection
5.2 Cable replacement
5.3 Positioning
49
49
50
53
55
57
66
66
66
66
66
66
67
67
68
70
72
74
76
76
76
77
We advise you to read this manual carefully, which contains all the instructions for
maintaining the appliance's aesthetic and functional qualities.
For further information on the product: www.smeg.com
41
Instructions
1 Instructions
1.1 General safety instructions
Risk of personal injury
• During use the appliance and its
accessible parts become very hot.
• Never touch the heating elements
during use.
• Keep children under eight years of
age at a safe distance if they are not
constantly supervised.
• Children must never play with the
appliance.
• Never rest metallic objects such as
knives, forks, spoons and lids on the
appliance during use.
• Switch the appliance off immediately
after use.
• Never try to put out a fire or flames
with water: turn off the appliance and
smother the flames with a fire blanket
or other appropriate cover.
• The appliance must never be cleaned
by unsupervised children.
• Have qualified personnel carry out
installation and assistance
interventions according to the
standards in force.
• Do not modify this appliance.
• Do not insert pointed metal objects
(cutlery or utensils) into the slots in the
appliance.
• Do not try to repair the appliance
yourself or without the intervention of
a qualified technician.
• If the power supply cable is
42
damaged, contact technical support
immediately and they will replace it.
Risk of damaging the appliance
• Do not use abrasive or corrosive
detergents on glass parts (e.g.
powder products, stain removers and
metallic sponges).
• Use wooden or plastic utensils.
• Do not seat on the appliance.
• Do not use steam jets for cleaning the
appliance.
• Do not obstruct ventilation openings
and heat dispersal slots.
• Never leave the appliance
unattended during cooking
operations where fats or oils could be
released.
• Never leave objects on the cooking
surface.
• Do not use the appliance to heat
rooms for any reason.
For this appliance
1.4 Disposal
• Ensure that the appliance is switched off
before replacing the bulb.
• Do not rest any weight or sit on the open
door of the appliance.
• Take care that no objects are stuck in the
doors.
This appliance must be disposed of
separately from other waste
(Directives 2002/95/EC, 2002/
96/EC, 2003/108/EC). The appliance
does not contain substances in quantities
sufficient to be considered hazardous to
health and the environment, in accordance
with current European directives.
To dispose of the appliance:
• Cut the power supply cable and remove
it along with the plug.
1.2 Manufacturer liability
The manufacturer declines all liability for
damage to persons or property caused by:
• use of the appliance other than the one
envisaged;
• non-observance of the user manual
provisions;
• tampering with any part of the
appliance;
• use of non-original spare parts.
1.3 Appliance purpose
• This appliance is intended for cooking
food in the home environment. Every
other use is considered improper.
• This appliance may be used by children
aged at least 8 and by people of
reduced physical and mental capacity,
or lacking in experience in the use of
electrical appliances, as long they are
supervised or instructed by adults who
are responsible for their safety.
• The appliance is not designed to
operate with external timers or with
remote-control systems.
Power voltage
Danger of electrocution
• Disconnect the main power supply.
• Disconnect the power cable from the
electrical system.
• Consign the appliance to the
appropriate selective collection centres
for electrical and electronic equipment
waste, or deliver it back to the retailer
when purchasing an equivalent product,
on a one for one basis.
43
EN
Instructions
Instructions
Our appliances are packed in nonpolluting and recyclable materials.
• Consign the packing materials to the
appropriate selective collection centres.
Plastic packaging
Danger of suffocation
• Do not leave the packaging or any part
of it unattended.
• Do not let children play with the
packaging plastic bags.
1.5 Identification plate
The identification plate bears the technical
data, serial number and brand name of the
appliance. Do not remove the identification
plate for any reason.
1.6 This user manual
This user manual is an integral part of the
appliance and must therefore be kept in its
entirety and in an accessible place for the
whole working life of the appliance.
Read this user manual carefully before using
the appliance.
1.7 How to read the user manual
This user manual uses the following reading
conventions:
Instructions
General information on this user
manual, on safety and final
disposal.
Description
Description of the appliance and its
accessories.
Use
Information on the use of the
appliance and its accessories,
cooking advice.
Cleaning and maintenance
Information for proper cleaning and
maintenance of the appliance.
Installation
Information for the qualified
technician: installation, operation
and inspection.
Safety instructions
Information
Advice
1. Use instruction sequence.
• Single use instruction.
44
Description
2 Description
EN
2.1 General Description
1 Control panel
2 Oven light
3 Seal
4 Door
5 Fan
6 Rack/tray support frames
7 Pizza plate
Frame shelf
45
Description
2.2 Control panel
Temperature knob (1)
Cooling fan
This knob allows you to select the cooking
time and temperature, set programmed
cooking and the current time as well as turn
the light inside the oven on and off.
The fan cools the oven and comes into
operation during cooking.
The fan causes a steady outflow of air from
above the door which may continue for a
brief period of time even after the appliance
has been turned off.
Display (2)
Displays the current time, the selected
cooking temperature and function and any
time set.
Function knob (3)
This knob allows you to turn the appliance
on and off and select the cooking function.
2.3 Other parts
Shelves
The appliance features shelves for
positioning trays and racks at different
heights. The insertion heights are indicated
from the bottom upwards (see 2.1 General
Description).
46
Interior lighting
The oven light comes on when the door is
opened or any function is selected, except
for
,
and
.
Turn the temperature knob briefly to the right
to activate or deactivate internal lighting.
Description
2.4 Available accessories
Oven tray
EN
Some models are not provided
with all accessories.
Rack
Useful for collecting fat from foods placed
on the rack above.
Deep tray
Useful for collecting fat from foods placed
on the rack.
Useful for supporting containers with food
during cooking.
Rotisserie support
Tray rack
To be used to support the rotisserie rod.
To be placed over the top of the oven tray;
for cooking foods which may drip.
47
Description
Rotisserie rod
Useful for cooking chicken and all foods
which require uniform cooking over their
entire surface.
Pizza spatula
For easily placing the pizza on the pizza
plate.
Pizza plate cover
The oven accessories intended to
come into contact with food are
made of materials that comply with
the provisions of current legislation.
Original and optional accessories
can be requested from Authorised
Assistance Centres. Use only
original accessories supplied by
the manufacturer.
Pizza plate
Useful for covering the pizza plate when it
is not in use.
The oven accessories intended to
come into contact with food are
made of materials that comply with
the provisions of current legislation.
Original and optional accessories
can be requested from Authorised
Assistance Centres. Use only
original accessories supplied by
the manufacturer.
Specially designed for cooking pizza and
similar dishes.
48
Use
3.1 Instructions
High temperature inside the oven
during use
Danger of burns
• Keep the oven door closed during
cooking.
• Protect your hands wearing heat
resistant gloves when moving food
inside the oven.
• Do not touch the heating elements inside
the oven.
• Do not pour water directly onto very hot
trays.
• Do not allow children to get near the
oven when it is in operation.
High temperature inside the oven
during use
Danger of fire or explosion
• Do not spray any spray products near
the oven.
• Do not use or leave flammable materials
near the oven.
• Do not use plastic kitchenware or
containers when cooking food.
• Do not put sealed tins or containers in
the oven.
• Do not leave the oven unattended
during cooking operations where fats or
oils could be released.
• Remove all trays and racks which are
not required during cooking.
Improper use
Risk of damage to enamelled
surfaces
• Do not cover the bottom of the cooking
compartment with aluminium or tin foil
sheets.
• If you wish to use greaseproof paper,
place it so that it will not interfere with the
hot air circulation inside the oven.
• Do not place pans or trays directly on
the bottom of the cooking compartment.
• Do not pour water directly onto very hot
trays.
3.2 First use
1. Remove any protective film from the
outside or inside of the appliance,
including accessories.
2. Remove any labels (apart from the
technical data plate) from the
accessories and from the cooking
compartment.
3. Remove and wash all the appliance
accessories (see 4 Cleaning and
maintenance).
4. Heat the empty oven at the maximum
temperature to burn off any residues left
by the manufacturing process.
49
EN
3 Use
Use
3.3 Using the accessories
Tray rack
Racks and trays
The tray rack has to be inserted into the tray.
In this way fat can be collected separately
from the food which is being cooked.
Racks and trays have to be inserted into the
side guides until they come to a complete
stop.
• The mechanical safety locks that prevent
the rack from being taken out
accidentally have to face downwards
and towards the oven back.
Rotisserie rod
Improper use
Risk of damages to the appliance
• Do not use the rotisserie handle if the
temperature set is greater than 250°C.
• To avoid damage, keep the handle
screwed onto the rod for a maximum of
15 seconds.
When cooking with the rotisserie, position
the rotisserie support frame on the third
shelf. Once the rod frame is inserted, the
shaped part must sit facing outwards.
Gently insert racks and trays into
the oven until they come to a stop.
Clean the trays before using them
for the first time to remove any
residues left by the manufacturing
process.
50
Prepare the rotisserie rod with the food
using the clip forks provided.
Once you have prepared the rotisserie rod,
place it on the rotisserie support.
Insert the rod into the hole A so that it
connects with the rotisserie motor.
Make sure that the pin is placed correctly
on the guide frame B.
Screw on the handle provided so that you
can handle the rod with the food on it
readily.
Remove the handle before closing
the door
We recommend that you place the
tray on the first shelf to collect fats
more easily.
51
EN
Use
Use
Cover and pizza plate (on some models
only)
Improper use
Risk of damage to surfaces
• Do not use the pizza plate other than as
described, for example do not use it on
gas or glass ceramic hobs or in ovens
which are not designed for this purpose.
• If you like oil on your pizza, it is best to
add it after removal from the oven since
oil stains on the pizza plate are unsightly
and may reduce its efficiency.
• If the pizza plate is not in use, cover the
bottom of the oven with the cover
provided.
With the oven cold, remove the cover from
the bottom and insert the pizza plate. Make
sure that the plate is inserted correctly in the
recess provided.
For cooking, use the special function
.
52
Pizza spatula (on some models only)
Always hold the pizza spatula by the
handle to put food in and take it out of the
oven. You are advised to dust the steel
surface lightly with flour to make it easier to
slide fresh products on and off, as they
could stick to the steel due to their moisture
content.
3.4 Using the oven
Switching the oven on
To switch the oven on:
1. Select the cooking function using the
function knob.
2. Select the temperature using the
temperature knob.
Functions list
Eco
The combination of the fan and the
circular element, in ECO mode, is
particularly indicated for cooking
on a single shelf at low power
consumption.
Circular
The combination of the fan and the
circular element (incorporated in the
rear part of the oven) allows
different foods to be cooked on
different shelves, as long as they
require the same temperature and
type of cooking. The circulation of
hot air ensures instantaneous and
uniform distribution of heat. It will be
possible, for instance, to cook fish,
vegetables and biscuits
simultaneously (on different levels)
without mixing odours and flavours.
Static
As the heat comes from above and
below at the same time, this system
is particularly suitable for certain
types of food. Traditional cooking,
also known as static cooking, is
suitable for cooking just one dish at
a time. Perfect for all types of roasts,
bread and cakes and in any case
particularly suitable for fatty meats
such as goose and duck.
Grill
The heat coming from the grill
element gives perfect grilling results
above all for thin and medium
thickness meat and in combination
with the rotisserie (where fitted)
gives the food an even browning at
the end of cooking. Perfect for
sausages, ribs and bacon. This
function enables large quantities of
food, particularly meat, to be grilled
evenly.
Rotisserie grill
The rotisserie works in combination
with the grill element, allowing food
to be perfectly browned.
Fan-assisted static
The operation of the fan, combined
with traditional cooking, ensures
uniform cooking even with complex
recipes. Perfect for biscuits and
cakes, even when simultaneously
cooked on several levels. (For
multiple-level cooking, we
recommend using the 2nd and 4th
shelves.)
53
EN
Use
Use
Turbo
The combination of fan-assisted
cooking and traditional cooking
allows different foods to be cooked
on several levels extremely quickly
and efficiently, without odours and
flavours mingling. Perfect for large
volumes that call for intense
cooking.
Fan-assisted grill
The air produced by the fan softens
the strong heatwave generated by
the grill, grilling perfectly even very
thick foods. Perfect for large cuts of
meat (e.g. shin of pork).
The defrosting and proving functions
are brought together under this
function (See Proving and
defrosting functions for further
details).
Fan-assisted bottom
The combination of the fan with just
the lower heating element allows
cooking to be completed more
rapidly. This system is
recommended for sterilising or for
finishing off the cooking of foods
which are already well-cooked on
the surface, but not inside, which
therefore need a little more heat.
Perfect for any type of food.
54
Circular element + fan-assisted grill
The combination of fan-assisted
cooking and traditional cooking
allows you to cook different foods
on several levels extremely quickly
and efficiently, without odours and
flavours mingling. Perfect for large
volumes that call for intense
cooking.
Eco pyrolysis
When this function is set, the oven
executes a pyrolysis at 500°C for a
pre-set time. For use in the case of
ovens which are not too dirty.
Pyrolysis
Setting this function, the oven
reaches temperatures up to 500°C,
destroying all the grease which
forms on the internal walls.
Pizza
The operation of the fan, combined
with the grill and the lower heating
element, ensures uniform cooking
even with complex recipes. Perfect
not just for pizzas, but also for
biscuits and cakes.
3.5 Cooking advice
Advice for cooking desserts and biscuits
General advice
• Use dark metal moulds: they help to
absorb the heat better.
• The temperature and the cooking time
depend on the quality and consistency
of the dough.
• To check whether the dessert is cooked
right through: at the end of the cooking
time, put a toothpick into the highest point
of the dessert. If the dough does not stick
to the toothpick, the dessert is cooked.
• If the dessert collapses when it comes
out of the oven, on the next occasion
reduce the set temperature by about
10°C, selecting a longer cooking time if
necessary.
• Use a fan-assisted function to achieve
uniform cooking at several levels.
• It is not possible to shorten cooking times
by increasing the temperature (the food
could be overcooked on the outside and
undercooked on the inside).
Advice for cooking meat
• Cooking times vary according to the
thickness and quality of the food and to
consumer taste.
• Use a meat thermometer when roasting
meat, or simply press on the roast with a
spoon. If it is hard, it is ready; if not, it
needs another few minutes cooking.
Advice for cooking with the Grill and the
Fan-assisted grill
• Meat can be grilled even when it is put
into the cold oven or into the preheated
oven if you wish to change the effect of
the cooking.
• With the Fan-assisted grill function, we
recommend that you preheat the oven
before grilling.
• We recommend placing the food at the
centre of the rack.
Advice for defrosting and proving
• Place frozen foods without their
packaging in a lidless container on the
first shelf of the oven.
• Avoid overlapping the food.
• To defrost meat, use the rack placed on
the second level and a tray on the first
level. In this way, the liquid from the
defrosting food drains away from the
food.
• The most delicate parts can be covered
with aluminium foil.
• For successful proving, a container of
water should be placed in the bottom of
the oven.
55
EN
Use
Use
To save energy
• Stop cooking a few minutes before the
time normally used. Cooking will
continue for the remaining minutes with
the heat which has accumulated inside
the oven.
• Reduce any opening of the door to a
minimum to avoid heat dispersal.
• Keep the inside of the appliance clean
at all times.
• (Where present) When it is not being
used, remove the pizza plate and put the
cover back in its slot.
Proving and defrosting functions
The special
defrosting and proving
functions are brought together under the
same function indicated by the
symbol.
The choice of temperature determines
whether defrosting or proving takes place
based on the table below.
Temperature
(°C)
Function
Runner position
from the bottom
30
40
Defrosting
Proving
1
1
56
Use
3.6 Display
EN
display shows the set temperature and the
temperature reached
.
Door lock indicator light
Child lock indicator light
or “Pyro” if the pyrolysis (automatic
cleaning cycle) is taking place.
Clock indicator light
Minute minder timer indicator light
Timed cooking with delayed start
indicator light
Timed cooking indicator light
Showroom indicator light
Temperature level reached.
Operating modes
Stand-by: When the function knob is
positioned on 0, the display shows the
symbol.
current time and the
Each time the temperature knob is pressed,
the parameters will be cycled through in the
following order:
1. Temperature setting.
2. Minute minder timer duration.
3. Timed cooking duration.
4. Programmed cooking duration (if timed
cooking has been selected).
5. Time display.
ON: When the function knob is positioned
on any other function different from 0, the
57
Use
Setting the time
Cooking functions
On the first use, or after a power failure,
will be flashing on the appliance's
display. To be able to start any cooking
function, the current time must be set.
Turn the temperature knob right or left to
reduce or increase the displayed time.
Keep it in the turned position to reduce or
increase more rapidly.
To select a cooking function, turn the
function selection knob right or left. The
oven will start cooking at the pre-set
temperature. Cooking itself is preceded by
a preheating stage, which allows the oven
to heat to the cooking temperature more
quickly. Temperature reached
flashes to indicate that this
stage is in progress. When the preheating
stage is over,
will remain lit
steadily and a buzzer will sound to indicate
that the food can be placed inside the
oven.
It may become necessary to
change the current time, for
example for daylight saving time.
From the stand-by position, keep
the temperature knob turned to the
right or left until the value changes.
It is not possible to change the time
if the oven is ON.
Cooking can be interrupted at any
time by turning the function knob to
0.
Modifying the preset temperature
The preset temperature for each function
can be changed to suit the user's
requirements. At any time while cooking is in
progress, press and turn the temperature
knob right or left to increase or decrease
the cooking temperature by 5 degrees at a
time. Keep the knob turned to produce a
faster increase or decrease.
58
Use
This function only activates the
buzzer, without stopping cooking.
The minute minder can be
activated both during cooking and
when the appliance is in standby.
1. Press the temperature knob once (twice if
cooking is already in progress). The
display shows
and the
indicator light flashes.
2. Turn the knob right or left to set the
duration (from 1 minute to 4 hours). After
a few seconds, the
indicator light
stops flashing and the countdown starts.
3. Select the required cooking function and
wait for the buzzer to sound, indicating
that the cooking time is over. The
indicator light flashes.
4. Turn the knob right or left to select a
further timer. Or else press the
temperature knob to stop the buzzer.
Timed cooking
Timed cooking is the function
which allows a cooking operation
to be started and then ended after
a specific length of time set by the
user.
Activation of timed cooking
cancels any minute minder timer
which may previously have been
set.
1. After selecting a cooking function and
temperature, press the temperature knob
three times. The display shows
and the
indicator light flashes.
2. Turn the knob right or left to set the
minutes of cooking from 00:01 to 12:59.
Keep the knob turned to produce a
faster increase or decrease.
59
EN
Minute minder
Use
3. A few seconds after the required
duration is set, the
indicator light
stops flashing and timed cooking starts.
4. At the end of the cooking time STOP
appears on the display and a buzzer will
sound that can be deactivated by
pressing the temperature knob.
Modifying the data set during timed
cooking
During operation, it is possible to modify
timed cooking duration:
1. When the
indicator light is steady
and the appliance is in the cooking
phase, press the temperature knob twice.
The
indicator light will start flashing.
2. Turn the temperature knob right or left to
alter the preset cooking time.
Programmed cooking
To select a further timed cooking,
turn the knob right or left again.
To extend the cooking time
manually, press the temperature
knob again. The appliance will
restart its normal operation with the
previously selected cooking
settings.
To switch the appliance off, turn the
function knob to 0.
60
Programmed cooking is the
function which allows a cooking
operation to be stopped at an
established time depending on the
time set by the user, after which the
oven will switch off automatically.
1. After selecting a cooking function and
temperature, press the temperature knob
three times. The display shows
and the
indicator light flashes.
Use
sound that can be deactivated by
pressing the temperature knob.
EN
2. Turn the knob right or left to set the
minutes of cooking from 00:01 to 12:59.
Keep the knob turned to produce a
faster increase or decrease.
3. Press the temperature knob a fourth time.
The
indicator light flashes. Turn the
knob right or left to set the cooking end
time.
To extend the cooking time
manually, press the temperature
knob again. The appliance will
restart its normal operation with the
previously selected cooking
settings.
4. After a few seconds the
and
indicator lights stop flashing. The
appliance waits for the set start time.
To switch the appliance off, turn the
function knob to 0.
For safety reasons, it is not possible
to set the cooking end time by itself
without setting the cooking
duration.
5. At the end of the cooking time STOP
appears on the display and a buzzer will
61
Use
Modifying the data set during
programmed cooking
After modifying the cooking time,
the end of cooking time must be reset.
During operation, it is possible to modify the
programmed cooking duration:
1. When the
and
indicator lights
are lit steadily and the appliance is
waiting for cooking to start, press the
temperature knob twice. The
indicator light will start flashing.
2. Turn the temperature knob right or left to
alter the preset cooking time.
3. Press the temperature knob again. The
indicator light switches off and the
indicator light starts flashing. The
display shows the cooking end time.
4. Turn the temperature knob right or left to
delay the cooking end time.
5. After a few seconds the
and
indicator lights stop flashing and
programmed cooking restarts its
operation with the new settings.
62
Secondary menu
The appliance also has a drop-down
secondary menu allowing the user to:
• Activate or deactivate the Child Lock.
• Activate or deactivate Showroom mode
(which disables all the heating elements
so that only the control panel works).
• Activate or deactivate Low Power mode.
With the appliance in Stand-By status
1. Activate the internal light by turning the
temperature knob quickly.
2. Press and hold the temperature knob
down for at least 5 seconds.
3. Turn the temperature knob right or left to
change the setting status (ON/OFF).
4. Press the temperature knob to move to
the next mode.
Use
Showroom mode (for exhibitors only):
This mode allows the appliance to
deactivate all heating elements, while
keeping the control panel active.
EN
Child Lock mode: This mode allows the
appliance to automatically lock the controls
after one minute of normal operation
without any intervention from the user.
To use the appliance normally, set this
mode to OFF.
During normal operation it is indicated by
the
indicator light coming on.
To temporarily release the lock during
cooking, hold the temperature knob down
for 5 seconds. One minute after the last
setting the lock will become active again.
If the mode is active, the
indicator light lights up on the
display.
Touching or varying the position of
the temperature and function
knobs, the display will show “bloc”
for two seconds.
63
Use
Low Power mode: This mode allows the
appliance to limit the power used.
HI: normal power.
LO: low power.
Activating low power mode means
that preheating and cooking times
may be extended.
64
Use
Cooking information table
Runner
Temperature
position from
(°C)
the bottom
1
220 - 230
1
220 - 230
Weight (Kg)
Function
Lasagne
Pasta bake
3-4
3-4
Static
Static
Roast veal
Pork
Sausages
Roast beef
Roast rabbit
Turkey breast
Roast pork neck
Roast chicken
2
2
1.5
1
1.5
3
2-3
1.2
Turbo
Turbo
Fan with grill
Turbo
Circulaire
Turbo
Turbo
Turbo
2
2
4
2
2
2
2
2
180 - 190
180 - 190
280
200
180 - 190
180 - 190
180 - 190
180 - 190
Pork chops
Spare ribs
Bacon
Pork fillet
Beef fillet
1.5
1.5
0.7
1.5
1
Fan with grill
Fan with grill
Grill
Fan with grill
Grill
4
4
5
4
5
280
280
250 - 280
250 - 280
250 - 280
Salmon trout
Monkfish
Turbot
1.2
1.5
1.5
Turbo
Turbo
Turbo
2
2
2
150 - 160
160
160
35 - 40
60 - 65
45 - 50
1
1
1
Turbo
Circulaire
Turbo
2
2
2
280
190 - 200
180 - 190
8-9
25 - 30
20 - 25
1
1
1
1
1.2
1.2
1
1
0.6
Circulaire
Circulaire
Circulaire
Turbo
Circulaire
Turbo
Circulaire
Turbo
Circulaire
2
2
2
2
2
2
2
2
2
160
160
160 - 170
160
160
180
150 - 160
160
160
55 - 60
35 - 40
55 - 60
20 - 25
55 - 60
80 - 90
55 - 60
55 - 60
30 - 35
Pizza
Bread
Focaccia
Sponge cake
Jam tart
Ricotta cake
Jam tarts
Paradise cake
Cream puffs
Light sponge cake
Rice pudding
Brioches
Time (minutes)
EN
Food
45 - 50
45 - 50
90 - 100
70 - 80
15
40 - 45
70 - 80
110 - 120
170 - 180
65 - 70
1st surface
2nd surface
15
10
7
10
10
5
10
8
5
7
The times indicated in the table do not include preheating times and are provided as a guide only.
65
Cleaning and maintenance
4 Cleaning and maintenance
4.1 Instructions
Improper use
Risk of damage to surfaces
• Do not use steam jets for cleaning the
appliance.
• Do not use cleaning products containing
chlorine, ammonia or bleach on steel
parts or parts with metallic finishes on the
surface (e.g. anodizing, nickel- or
chromium-plating).
• Do not use abrasive or corrosive
detergents on glass parts (e.g. powder
products, stain removers and metallic
sponges).
• Do not use rough or abrasive materials
or sharp metal scrapers.
4.4 Food stains or residues
Do not use metallic sponges or sharp
scrapers as they will damage the surfaces.
Use ordinary non-abrasive products with
the aid of wooden or plastic utensils if
necessary. Rinse thoroughly and dry with a
soft cloth or a microfibre cloth.
Do not allow residues of sugary foods (such
as jam) to set inside the oven. If left to set for
too long, they might damage the enamel
lining of the oven.
4.5 Removing the door
For easier cleaning, the door can be
removed and placed on a canvas.
To remove the door proceed as follows:
1. Open the door completely and insert two
pins into the holes on the hinges
indicated in the figure.
4.2 Cleaning the surfaces
To keep the surfaces in good condition,
they should be cleaned regularly after use.
Let them cool first.
4.3 Ordinary daily cleaning
Always use only specific products that do
not contain abrasives or chlorine-based
acids.
Pour the product onto a damp cloth and
wipe the surface, rinse thoroughly and dry
with a soft cloth or a microfibre cloth.
66
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
Cleaning and maintenance
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections A are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
For easier cleaning the door internal glass
panels can be disassembled.
1. Remove the internal glass panel by
pulling the rear part gently upwards,
following the movement indicated by the
arrows (1).
2. Then, pull the front part upwards (2). In
this way, the 4 pins attached to the glass
detach from their housings in the oven
door.
3. Some models have an intermediate glass
panel. Remove the intermediate glass
panel by lifting it upwards.
4.6 Cleaning the door glazing
The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
We recommend the use of
cleaning products distributed by
the manufacturer.
67
EN
4.7 Removing the internal glass
panels
Cleaning and maintenance
4. Clean the external glass panel and the
panels previously removed. Use
absorbent kitchen roll. In case of
stubborn dirt, wash with a damp sponge
and neutral detergent.
5. Refit the panels in the reverse order in
which they were removed.
6. Reposition the internal glass panel. Take
care to centre and insert the 4 pins into
their housings in the oven door by
applying slight pressure.
4.8 Cleaning the inside of the oven
For the best oven upkeep, clean it regularly
after having allowed it to cool.
Take out all removable parts.
Clean the oven racks with warm water and
non-abrasive detergent. Carefully rinse and
dry the damp parts.
The oven should be operated at
the maximum temperature for
about 15-20 minutes after the use
of specific products, to burn off the
residues left inside the oven.
For easier cleaning, remove the
door.
68
Removing racks/trays support frames
On pizza models only:
Removing the guide frames enables the
sides to be cleaned more easily. This
operation should be performed each time
the automatic cleaning cycle is used (on
some models only).
To Remove the guide frames: Pull the guide
frames towards the inside of the oven so as
to remove it from groove A, then unhook it
from the seats B on the back.
When cleaning is complete, repeat the
above procedures to put the guide frames
back in.
Remove in sequence the pizza plate cover
(1) and the base (2) on which it is placed.
The base has to be lifted a few millimetres,
then pulled outwards.
Lift the end of the bottom heating element
(3) a few centimetres and clean the oven
base.
Put the pizza plate base back in place,
pushing it in until it hits the back of the oven,
and push it down so that the heating
element plate is embedded into the base
itself.
69
EN
Cleaning and maintenance
Cleaning and maintenance
Cleaning the pizza plate
The pizza plate should be washed
separately according to the following
instructions:
Pyrolytic models: leave the pizza stone
inside and activate the pyrolysis function,
then at the end, when the stone has cooled
down to lukewarm, wipe it with a damp
microfibre cloth to remove any residues.
Multifunction models: the stone must be
cleaned after every use. Do not heat it
again if it has any encrustations. To clean,
pour 55 cc of vinegar onto the stone, leave
it to act for 10 minutes, then remove it by
wiping with a metallic mesh or abrasive
sponge. Rinse with water then leave to dry.
• Before cleaning, remove any dirt burnt
onto the stone with the aid of a metal
spatula or a scraper of the kind used for
cleaning glass-ceramic hobs.
• For best results, the stone must still be
warm; otherwise, wash it in hot water;
• Use metal mesh sponges or abrasive
scotch-brite pads, dipped in lemon or
vinegar.
• Never use detergents.
• Never wash in the dishwasher.
• Never leave the stone to soak.
• The damp stone must not be used for a
least 8 hours after the end of the
cleaning procedures.
• Over time, slight cracks may appear on
the surface of the stone. This is due to the
normal expansion of the stone's finishing
glazes at high temperatures.
70
4.9 Vapor Clean: assisted oven
cleaning (on some models only)
Vapor Clean is an assisted
cleaning procedure which
facilitates the removal of dirt.
Thanks to this process, it is possible
to clean the inside of the oven very
easily. The dirt residues are
softened by the heat and water
vapour for easier removal
afterwards.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Carry out assisted oven cleaning
operations only when the oven is cold.
Preliminary operations
Before starting the Vapor Clean function:
• Completely remove all accessories from
inside the oven. The upper guard can be
left inside the oven.
• For multifunction models: Pour approx.
40 cc of water onto the floor of the oven.
Make sure it does not overflow out of the
cavity.
Cleaning and maintenance
EN
towards the deflector.
• For pizza models: Place a tray on the
bottom of the oven.
• Pour approximately 40 cl of water into
the tray. Make sure it does not overflow
out of the cavity.
• Close the door.
We recommend spraying approx.
20 times at the most.
Vapor Clean setting
• Spray a water and washing up liquid
solution inside the oven using a spray
nozzle. Direct the spray against the side
walls, upwards, downwards and
If the internal temperature is
greater than that required for the
Vapor clean function, the cycle will
be stopped immediately and
STOP will appear on the display.
Leave the appliance to cool down
before activating the assisted
cleaning cycle.
1. Turn the function knob to select the
symbol.
71
Cleaning and maintenance
2. The duration and temperature of the
cleaning cycle will appear on the
display.
3. Press the temperature knob to start the
cycle.
4. A buzzer will indicate the end of the
Vapor Clean cycle.
The temperature and time
parameters cannot be modified by
the user.
End of the Vapor Clean cycle
5. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
6. Use an anti-scratch sponge with brass
filaments on tougher encrustations.
7. In case of grease residues use specific
oven cleaning products.
8. Remove the water left inside the oven.
For improved hygiene and to avoid food
being affected by any unpleasant odours,
we recommend that the oven is dried using
a fan-assisted function at 160°C for
approximately 10 minutes.
We recommend wearing rubber
gloves for these operations.
For easier manual cleaning of the
parts difficult to reach, we
recommend removing the door.
72
4.10 Pyrolysis: automatic oven
cleaning (on some models only)
Pyrolysis is an automatic hightemperature cleaning procedure
which causes dirt to dissolve.
Thanks to this process, it is possible
to clean the inside of the oven very
easily.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Switch off the burners or electric hot
plates of the hob installed above the
oven.
Preliminary operations
Before starting the pyrolysis cycle:
• Clean the internal glass panel following
the usual cleaning instructions.
• For very stubborn deposits, spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven.
• Remove the racks/trays support frames.
• Remove the upper guard (where
present).
• Close the door.
Cleaning and maintenance
1. Turn the function knob until
or
is activated; the
indicator light
will flash.
2. Turn the temperature knob to the right or
to the left to set the cleaning cycle
duration from a minimum of 2 hours to a
maximum of 3 hours (except for the
function whose duration is 120
minutes).
3. Press the temperature knob to start the
pyrolysis cycle. The
indicator light
will stop flashing and be lit steadily.
Recommended pyrolysis duration:
• Light dirt: 2 hours.
• Medium dirt: 2 hours and a half.
• Heavy dirt: 3 hours.
Pyrolysis
4. The display shows “Pyro” and the
remaining time to indicate that the
appliance is carrying out the automatic
cleaning cycle.
5. Two minutes after the pyrolysis cycle has
started the door is locked (the door lock
indicator light
comes on) by a device
that prevents the door from being
opened.
It is not possible to select any
function once the door locking
device has been activated.
EN
Pyrolysis setting
6. At the end of the pyrolysis cycle, the door
remains locked as long as the
temperature inside the oven returns to
safety levels. Wait for the oven to cool
down and collect the residues deposited
inside with a damp microfibre cloth.
During the first pyrolysis cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolysis.
During the pyrolysis cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolysis cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
If the pyrolysis gives unsatisfactory
results at minimum duration, it is
recommended to set a longer time
for successive cleaning cycles.
73
Cleaning and maintenance
Setting of programmed pyrolysis
It is possible to program the pyrolysis start
time.
7. After selecting the pyrolysis cycle
duration, press the temperature knob.
The display shows the current time and
the
indicator light comes on.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
8. Turn the temperature knob to set the time
at which you wish to terminate the
pyrolysis cycle.
9. After a few seconds, the
and
indicator lights remain lit steadily and the
appliance waits for the set start time to
start the cleaning cycle.
4. Slide out and remove the lamp.
It is not possible to select any
function once the door locking
device has been activated.
4.11 Extraordinary maintenance
Live parts
Danger of electrocution
• Disconnect the oven power supply.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the racks/trays support frames.
74
Do not touch the halogen lamp
directly with your fingers, but wrap
it in an insulating material.
5. Replace the lamp with one of the same
type (40W).
6. Replace the cover correctly, so that the
moulded part of the glass is facing the
door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
What to do if...
The display is completely off:
• Check the mains power supply.
• Check whether an omnipolar switch
upstream of the appliance supply line is
in the “ON” position.
The appliance does not heat up:
• Check whether it has been set in
“showroom” mode (for further details see
“Secondary menu”).
The controls do not respond:
• Check whether it has been set in “child
lock” mode (for further details see
“Secondary menu”).
The cooking times are longer than those
indicated in the table:
• Check whether it has been set in “low
power” mode (for further details see
“Secondary menu”).
After the automatic cleaning cycle
(pyrolysis) it is not possible to select a
function:
• Verify whether the door locking device
has deactivated. If it has not, the oven
has a protection device that does not
allow functions to be selected while the
door locking device is active. This is
because the temperature inside the oven
is still too high to permit any type of
cooking.
The display shows “ERR4”:
• The door lock has not properly attached
to the door. This might be because the
door was accidentally opened during
the door lock activation. Switch the oven
off and on again, waiting a few minutes
before selecting a new cleaning cycle.
If the door is opened during a fan-assisted
function, the fan stops:
• This is not a fault. It is a normal operation
of the appliance, useful when cooking
foods in order to avoid excessive heat
escaping. When the door is closed, the
oven will return to normal operation.
If the problem has not been
resolved or in the case of other
types of fault, contact your local
technical support centre.
If other ERRx error messages are
indicated:
note down the error message,
function and set temperature and
contact your local technical
support centre.
75
EN
Cleaning and maintenance
Installation
5 Installation
5.1 Electrical connection
Power voltage
Danger of electrocution
• Have the electrical connection
performed by authorised technical
personnel.
• The appliance must be connected to
earth in compliance with electrical
system safety standards.
• Disconnect the main power supply.
General information
Check the grid characteristics against the
data indicated on the plate.
The identification plate bearing the
technical data, serial number and brand
name is visibly positioned on the appliance.
Do not remove this plate for any reason.
The appliance works at 220-240 V~.
Use a H05V2V2-F type three-core cable (3
x 1.5 mm2 cable, referring to the cross
section of the internal conductor).
Perform the ground connection using a wire
that is 20 mm longer than the other wires.
Fixed connection
Fit the power line with an omnipolar circuit
breaker in compliance with installation
regulations.
The circuit breaker should be located near
the appliance and in an easily reachable
position.
Connection with plug and socket
Make sure that the plug and socket are of
the same type.
Avoid using adapters and shunts as these
could cause overheating and a risk of
burns.
5.2 Cable replacement
Power voltage
Danger of electrocution
• Disconnect the main power supply.
1. Unscrew the rear casing screws and
remove the casing to access the terminal
board.
2. Replace the cable.
3. Make sure that the cables (for the oven
or any hob) follow the best route in order
to avoid any contact with the appliance.
76
Installation
Heavy appliance
Danger of crush injuries
Secure the appliance to the piece of
furniture using screws.
EN
5.3 Positioning
• Place the appliance into the piece of
furniture with the aid of a second person.
Pressure on the open door
Risk of damages to the appliance
• Never use the oven door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when open.
Cover the bushings with the covers
removed previously.
Heat production during appliance
operation
Risk of fire
• Check that the piece of furniture material
is heat resistant.
• Check that the piece of furniture has the
required slots.
Appliance overall dimensions (mm)
Fastening bushings
Remove the bushing covers inserted on the
oven front.
Mount the appliance into the recess.
77
Installation
Mounting under worktops (mm)
Make sure that the piece of
furniture rear/bottom part has an
opening of approx. 60 mm.
78
Mounting into a column (mm)
Make sure that the piece of
furniture top/rear part has an
opening approx. 35-40 mm deep.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement