Model RA-WM

Model RA-WM
Instructions for Model RA-WM Remote Alarm
REMOTE ALARM
MODEL RA-WM
Used for additional indication of water leakage.
Compatible with all Series 2100 monitors and SS-4,
SS-5 and VR-4 Water Alert Detectors.
FEATURES
Unit is surface wall mounted.
dimensions- 6"H x 3"W x 2"D
85db Audible Alarm w/silence
switch
UL Listed input transformer.
Input: Normally Open Contact
10mm LED indicator
PRINCIPLE OF OPERATION
The RA-WM is a Remote Alarm panel activated by a” Normally Open” dry relay contact closing.
The unit is wall mounted and utilizes 120V AC outlet.
INSTALLATION
1) Remove “A” screws x4, to expose internal.
2) Locate on wall near 120VAC wall outlet.
Scribe “B” hole and “C” holes on wall.
( “B” hole for rear wire entery only).
3) Drill “C” Holes 1/4”.
C
C
A
A
REMOTE ALARM ENCLOSURE
10 mm LED
Silence
4) Use inserts and screws to fasten unit to
wall.
5) Run Normally open contact ( 2 conductor)
Threw “B” or “D” hole and wire to Black pig
tail leads. (Use wire nuts supplied)
B
Audible Alarm
A
C
A
D
C
Wall Outlet Transformer
Enter from bottom(D)
or rear (B), Normally Open
Dry relay contact.
(2 conductor)
MADE IN USA
5-12
M-9943
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement