Xvision XPB621 Instruction manual
Advertisement
Advertisement
Model:
XPB621
True Day/Night 580/700 TVL IR Bullet
Camera with 50m Night Vision & Auto
Iris Varifocal Lens
Before you begin
• Please unpack the box carefully and identify that all the parts are present.
The camera is suitable for indoor or outdoor use. Please bear in mind the following points when choosing a mounting position.
• The camera must be positioned so that it will not point directly into the sun (sunrise and sunset) or any bright light, as this may cause damage to the camera.
• Do not cut the camera cables, this will void the warranty.
• Make sure you use only the recommended power supply. Damage caused to the
camera by incorrect voltage or wiring is not covered by the warranty.
Model:
XPB621
True Day/Night 580/700 TVL IR Bullet Camera with 50m Night Vision & Auto Iris Varifocal Lens
Thank you for purchasing this Xvision camera. Before operating this product, please read this instruction manual carefully.
1. Safety Precautions
2
z When in use please avoid direct contact with eyes and do not touch the camera body as it can get very hot.
z When installing the camera, please avoid pointing it directly at paper or flammable materials.
z Please avoid all direct contact with the tempered glass cover to avoid contamination. If you need to clean the cover use cotton wool balls dipped in alcohol or glass wipes.
2. Product Description
The XPB621 bullet camera is designed for high risk applications. It offers very high resolution images of 580 TVL in Colour mode and 700 TVL in B/W mode, with a low lux sensitivity of 0.0003 lux. It features Dynamic Night View, Number Plate Recognition, Wide
Dynamic Range, Smart DNR for disk saving and an Auto Iris Varifocal Lens with 36x Optical
Zoom. It is designed for internal or external use and can be wall or ceiling mounted.
In addition to this the camera features high output IR LEDs for up to 50 metres IR night vision in complete darkness.
3. Features
z 700 TVL resolution images in B/W mode and 580 TVL in Colour.
z Sony 1/3” Ex View CCD Image Sensor with Xvision XX3 DSP.
z 3.5 to 16.0mm Aspherical Auto Iris Varifocal lens for 17° to 85° viewing angle for super sharp images and easy selection of the optimum viewing angle during installation.
z Integrated Long Life Infra Red LEDs turn on automatically in low light conditions or complete darkness and provide up to 50 metres Night Vision.
z Dynamic Night View technology provides clear images without the need for IR LEDs down to 0.0003 lux, this is achieved by using Field Integration, please note due to way in which field integration works, whilst it is in operation the frame per second will reduce. The darker the scene the lower the frame per second.
z
Number Plate Recognition using advanced Highlight Suppression Technology.
z Smart DNR (3D Digital Noise Reduction) reduces the noise on the image when viewing in low lux environments (like at night), this reduces the size of the image when being recorded by a DVR, resulting in a saving of disk space.
z WDR (Wide Dynamic Range) feature allows the camera to display balanced pictures even when the scene being watched has bright spots or various light level and back light conditions.
z Designed for Wall or Ceiling Mounting, suitable for Internal or External use.
3
4. Contents
XPB621 Camera
4x Fixing Screws
4x Wall Plugs
Hex Wrench
5. Product Assembly
Unscrew the camera here to access the Camera OSD
Controls and the Zoom &
Focus Adjustment Rings
4
Figure 1
6. Installation
1. Drill a hole in the wall approximately 20mm in diameter, to feed the cables through.
2. Drill 4 holes and insert the wall plugs.
3. Feed the cables into the central hole before fixing the camera using the 4 fixing screws.
Fixing Holes Guide
Not shown actual size
Figure 2
7. Lens Adjustment
The XPB621 is fitted with a Varifocal lens. You can make adjustments to both the Zoom and
Focal Length by following these easy steps:
1. Carefully unscrew the camera housing and pull the casing away.
2. Connect the Video Output to a monitor or other video device through a 75 Ohms type coaxial cable.
3. Once the picture appears on the monitor, make the Zoom Adjustment by rotating the long screw (NEAR: Anti-clockwise, FAR: Clockwise) until you get the desired view. Next make the Focal Adjustment by rotating the long screw (TELE: Anti-clockwise, WIDE:
Clockwise) until you get the desired view (as shown in Figure 3). (If the long screw does not move turn it Anti-clockwise to unscrew it, this will loosen it and allow you to make the adjustment, after adjustment tighten both screws by turning Clockwise, see
Figure 4).
5
Figure 3
Figure 4
8. Camera OSD Control
1. Unscrew the camera housing to access the OSD Menu.
(See 5. Product Assembly for details)
2. Push the joystick controller down to access the menu options.
OSD Joystick
Controller
Video Test
Connector
OSD Joystick Controller Actions
Press this Control
UP, DOWN
LEFT, RIGHT
SETUP (MENU)
For this Action
Select a new item
Select a menu item
Access a sub menu
9. OSD Menu Structure
6
SETUP MENU
LENS
● DC
EXPOSURE
●
●
SHUTTER
BLC
● MANUAL
●
BRIGHTNESS ● AGC
●
D-WDR
●
RETURN
WHITE BALANCE
●
ATW
●
INDOOR
●
OUTDOOR
●
●
SENSE-UP
AWC-> SET ● MANUAL
DAY/NIGHT
●
COLOR
3DNR
● ON
●
AUTO
● OFF
SPECIAL
●
CAMTITLE
●
D-EFFECT
●
PRIVACY
●
SNYC
ADJUST
● SHARPNESS ● BLUE
●
●
●
●
EXT
RS-485
●
MOTION
LANGUAGE ● RETURN
RED
●
●
B/W
RETURN
RESET
● FACTORY
EXIT
● RETURN
10. SETUP Menu Functions
1. LENS
<Option : DC / MANUAL>
This option should be left on DC.
2. EXPOSURE
<Option : SHUTTER / BRIGHTNESS / AGC / SENS-UP / BLC / D-WDR / RETURN>
• SHUTTER: Adjusts shutter settings <AUTO / FLK / MANUAL>
- AUTO - Adjusts shutter settings to control the brightness level on screen.
- FLK (Flickerless mode) - Reduces on-screen flickering. FLK is the only option available when the camera lens is set to DC mode.
- MANUAL - Allows you to adjust the shutter speed from 1/60~1/120,000 of a second (NTSC), or 1/50~1/100,000 (PAL).
• BRIGHNTESS: Adjusts brightness settings
• AGC: Automatic Gain Control <HIGH / MIDDLE / LOW / OFF>
For better performance in low light conditions the AGC can be increased. This has the effect of making the picture brighter (however it may also add more noise to the picture, as it is amplifying all aspects of the video signal).
• SENS-UP (DYNAMIC NIGHT VIEW): <AUTO / OFF>
To get a clear image under night or low lighting level.
- AUTO - In low light or at night time, select this feature. Select proper level from X2 to X256 (use the X256 setting for the lowest lux level response of the camera).
- OFF - Deactivate SENS-UP feature.
• BLC: Back Light Compensation <OFF / BLC / HSBLC>
The BLC function makes objects in front of a bright scene (such as a window on a bright sunny day) clearer to see by increasing their brightness and making the background darker.
- OFF - Deactivate BLC feature
- BLC - Select this feature for standard BLC Mode
- HSBLC (Highlight Suppress BLC for Numberplate Recognition) - Select this feature to select masking of bright areas in the image, such as when viewing number plates when car headlights are on.
• D-WDR: Wide Dynamic Range <OFF / INDOOR / OUTDOOR>
Wide Dynamic Range allows the camera to display balanced pictures even when the scene being watched has bright spots or various light level and back light conditions
Select INDOOR or OUTDOOR mode to activate this feature depending on the environment the camera is installed in.
• RETURN: Select to return to Main Menu.
7
10. SETUP Menu Functions
continued
8
3. WHITE BALANCE
<Option : ATW / AWB / AWC-SET / MANUAL / INDOOR / OUTDOOR >
• ATW: Auto Tracking White Balance. Use this mode when the colour temperature is between 1800k~10,500k
• AWB: Automatic White Balance. This feature automatically adjusts the colour temperature of the camera image to match the type of light available, so that white and other colours appear as natural as possible.
• AWC-SET: Find the optimal setting for the current luminance environment in this mode. Set the point the camera towards a sheet of white paper and press the Joystick
S/W. If the environment changes, re-adjust it.
• MANUAL: To fine-tune the White Balance manually, set White Balance first by using the ATW or AWC mode. After that switch to Manual mode, fine-tune the White Balance and then press Joystick S/W.
• INDOOR: Use this mode when the colour temperature is between 4,500k~8,500k.
• OUTDOOR: Use this mode when the colour temperature is between 1,800k~10,500k
(Sodium light included).
4. DAY/NIGHT
<Option : COLOR / AUTO / B/W / EXT>
COLOR : Sets the display to always show a colour picture.
• AUTO: Sets the display to automatically switch to colour in a normal environment, and to B/W when illumination is low. <DELAY / S-LEVEL / E-LEVEL>
- DELAY - Set Delay time to switch colour to B/W
- S-LEVEL - Set Start Level of luminance that you define.
- E-LEVEL - Set End Level of luminance that you define.
• B/W: Sets the display to always show a B/W picture.
• EXT: It enables user to control DAY/NIGHT mode by inputting an external signal.
5. 3DNR - 3D DIGITAL NOISE REDUCTION
<Option : ON / OFF>
Select this function to reduce the noise on the image when viewing in low lux environments (like at night), this reduces the size of the image when being recorded by a DVR, resulting in a saving of disk space. The 3D function reduces the noise on all
3 dimensions of an object, resulting in a better image than is possible with standard
Digital Noise Reduction.
• ON: Activate 3DNR by selecting the desired 3DNR Level
• OFF: Deactivate 3DNR Mode.
10. SETUP Menu Functions
continued
6. SPECIAL MENU
6.1 CAM TITLE
<Option : ON / OFF>
Use the feature to display a title on the monitor.
CAM TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K
L M N O P Q R S T U V
W X Y Z ( )
- _ / = & : ~ , .
CLR POS END
NEXT CHIP
• ON: Enter your desired title by using the Joystick control.
• OFF: Deactivate CAM TITLE. No title will be appeared on the monitor.
6.2 D-EFFECT
<Option : FREEZE / MIRROR / D-ZOOM / GAMMA / NET.IMAGE>
Use Digital Effect for specific effects.
D-EFFECT
FREEZE
MIRROR
D-ZOOM
GAMMA
NEG. IMAGE
RETURN
OFF
OFF
OFF
0.45
OFF
RET
D-ZOOM
PAN
TILT
RETURN
D-ZOOM
X 1.0
0
0
RET
• FREEZE: Hold the camera image displayed on screen.
• MIRROR: Reverse the picture vertically or horizontally.
• D-ZOOM To enable 32x Digital Zoom. Set your desirable Zoom ratio and position.
• GAMMA: 0.45 is fixed. We recommend you do not change this setting.
• NET. IMAGE: Changes the camera image to display in ‘negative’ colours.
6.3 RS-485
<Option : ON / OFF>
Set the BAUD RATE to communicate with other devices.
9
10. SETUP Menu Functions
continued
6.4 MOTION
<Option : ON / OFF>
This function will transmit an alert signal when it detects motion on screen.
MOTION
AREA SELECT
AREA DISPLAY
LEFT/RIGHT
WIDTH
TOP/BOTTOM
HEIGHT
SENSITIVITY
MOTION VIEW
RETURN
AREA 1
ON
8
32
4
24
40
OFF
RET
• ON: Activate Motion Detection mode. Select the motion detection area where you want by using the Joystick control. Up to 4 areas can be selected.
• OFF: Deactivate Motion Detection mode.
10
6.5 PRIVACY
<Option : ON / OFF>
This function will mask up to 8 areas on the display.
PRIVACY
AREA SELECT
AREA DISPLAY
LEFT/RIGHT
WIDTH
TOP/BOTTOM
HEIGHT
COLOR
MOTION VIEW
RETURN
AREA 1
ON
8
16
8
16
0
OFF
RET
• ON: Activate Privacy. Select the areas to be masked by using the Joystick control. Up to
8 areas can be selected.
• OFF: Deactivate Privacy mode.
6.6 PRIVACY
<Option : INTERNAL / LINE LOCK >
Two SYNCHRONIZATION modes are available, Internal / Line Lock.
6.7 LANGUAGE
<Option : ENGLISH / CHINESE >
Select the language the OSD Menu will be displayed in.
10. SETUP Menu Functions
continued
7. ADJUST
<Option : SHARPNESS / BLUE / RED / RETURN >
Adjust Sharpness, RED and BLUE levels on the camera image.
MOTION
SHARPNESS
BLUE
RED
RETURN
17
69
63
RET
8. RESET
Resets all settings to Factory Default.
9. EXIT (SAVE)
Select to save OSD Menu settings and EXIT the Setup Menu.
11
Specifications
12
Model:
Picture Type:
Image Sensor:
DSP:
Resolution:
Lens Viewing Angle:
Infra Red Night Vision:
Minimum Illumination:
Audio:
Operating Voltage:
Suggested Power Supply:
Mounting:
Weatherproofing:
Dimensions (WxHxD):
XPB621
Day/Night (B/W & Colour)
Sony 1/3” Ex View CCD
Xvision XX3
580 TVL (Colour mode)
700 TVL (B/W mode)
17 to 85°
50 metres
0 Lux (IR on)
0.0003 Lux (IR off & B/W mode)
No
12V DC 750mA
12V DC 1250mA
Wall or Ceiling
Yes
73 x 69 x 235mm
TECHNICAL SUPPORT:
For Technical Support for any Xvision product please contact your local distributor.
LIMITED WARRANTY:
This product is supplied with a 3 Year warranty. The Warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a problem with this product, it should be returned to the place of purchase.
Should you require replacement LEDs please contact your local distributor.
Manufactured exclusively for Xvision - www.x-vision.co.uk
UK/Europe
Xvision Group (UK)
Unit 2, Valley Point,
Beddington Farm Road,
Croydon, Surrey
CR0 4WP
Far East
Kyoung Am Building
157-27 Samsung-dong
Kangnam-ku
135 090 Seoul
Korea
Middle East
Burjuman Tower,
18th Floor
PO Box 121828
Dubai 43659
United Arab Emirates
North America
100 Park Avenue
New York City,
New York
10017
United States

Public link updated
The public link to your chat has been updated.
Advertisement