Optoma HD3300 User Guide

Optoma HD3300 User Guide
Table of Contents
Table of Contents.........................1
SETUP............................................................38
SETUP | Signal -RGB Source........................40
Usage Notice................................2
Safety Information........................................2
Precautions..................................................3
Eye Safety Warnings....................................6
SETUP | Signal -Video Source.......................41
Appendices.................................42
Troubleshooting.......................................... 42
Image Problems..............................................42
Introduction..................................7
Other Problems...............................................44
Package Overview.......................................7
Remote Control Problems..............................44
Product Overview.........................................8
LED Lighting Messages..................................45
Main Unit...........................................................8
On Screen Messages.....................................46
Connection Ports..............................................9
Replacing the Lamp................................... 47
Remote Control...............................................10
Compatibility Modes................................... 49
Installation..................................11
Connecting the Projector............................ 11
RS232 Commands and Protocol Function
List.............................................................. 52
RS232 Pin Assignments.................................52
Connect to Computer/Notebook................. 11
Connect to Video........................................ 12
Connect to 3D Video Devices.................... 13
Using the 3D glasses................................. 15
Powering On/Off the Projector................... 16
RS232 Protocol Function List.........................53
Ceiling Mount Installation........................... 56
Optoma Global Offices............................... 57
Regulation & Safety Notices....................... 59
Powering On the Projector..............................16
Powering off the projector..............................17
FCC Notice.....................................................59
Declaration of Conformity for EU countries....60
Warning Indicator............................................17
Adjusting the Projected Image................... 18
Adjusting the Projector’s Height.....................18
Adjusting the Projector’s Zoom / Focus..........18
Adjusting Projection Image Size.....................19
User Controls.............................20
Remote Control.......................................... 20
On-screen Display Menus.......................... 22
How to operate...............................................22
Menu Tree.................................................. 23
IMAGE............................................................25
IMAGE | Advanced.........................................27
IMAGE | Advanced | PureEngine....................28
IMAGE | Advanced | Color Settings................29
DISPLAY.........................................................31
DISPLAY | 3D.................................................33
SYSTEM.........................................................35
SYSTEM | Lamp Settings...............................37
Downloaded from ProjectorsManual.com Manuals
1
English
Usage Notice
Safety Information
The lightning flash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of the
projector and to protect from over heating, it is recommended to install the
projector in a location that does not block ventilation. As an example, do
not place the projector on a crowded coffee table, sofa, bed, etc. Do not
put the projector in an enclosure such as a book case or a cabinet that
restricts air flow.
2. Do not use the projector near water or moisture. To reduce the risk of fire
and/or electric shock, do not expose the projector to rain or moisture.
3. Do not install near heat sources such as radiators, heaters, stoves or any
other apparatus such as amplifiers that emits heat.
4. Clean only with dry cloth.
5. Only use attachments/accessories specified by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused. Physical
damage/abuse would be (but not limited to):
-- Unit has been dropped.
-- Power supply cord or plug has been damaged.
-- Liquid has been spilled on to the projector.
-- Projector has been exposed to rain or moisture.
-- Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards. Please call
Optoma before you send the unit for repair.
7. Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short out parts that could result in fire or electric
shock.
8. See projector enclosure for safety related markings.
9. The unit should only be repaired by appropriate service personnel.
Downloaded from ProjectorsManual.com
Manuals
2
English
Usage Notice
Precautions
Please follow all warnings, precautions and maintenance as recommended in this user’s guide.
NOTE
™™ When the lamp
reaches the end
of its life, the projector will not turn
back on until the
lamp module has
been replaced. To
replace the lamp,
follow the procedures listed under
“Replacing the
Lamp” section.
▀■ Warning-
Do not look into the projector’s lens when the
lamp is on. The bright light may hurt your eyes.
▀■ Warning-
To reduce the risk of fire or electric shock, do
not expose this projector to rain or moisture.
▀■ Warning-
Please do not open or disassemble the projector as this may cause electric shock.
▀■ Warning-
When replacing the lamp, please allow the unit
to cool down.
▀■ Warning-
This projector will detect the life of the lamp
itself. Please be sure to change the lamp when
it shows warning messages.
▀■ Warning-
Reset the “Lamp Reset” function from the onscreen display “System|Lamp Setting” menu
after replacing the lamp module.
▀■ Warning-
When switching the projector off, please ensure
the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the
projector to cool down.
▀■ Warning-
Do not use lens cap when projector is in operation.
▀■ Warning-
When the lamp is approaching to the end of
its life time, the message “Replacement suggested” will show on the screen. Please contact
your local reseller or service center to change
the lamp as soon as possible.
Downloaded from ProjectorsManual.com Manuals
3
English
Usage Notice
Do:
™™ Turn off and unplug the power plug from the AC outlet before
cleaning the product.
™™ Use a soft dry cloth with mild detergent to clean the display housing.
™™ Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Do not:
™™ Block the slots and openings on the unit provided for ventilation.
™™ Use abrasive cleaners, waxes or solvents to clean the unit.
™™ Use under the following conditions:
-- In extremely hot, cold or humid environments.
`` Ensure that the ambient room temperature is within 5°C ~
35°C
`` Relative humidity is 10% ~ 85%
-- In areas susceptible to excessive dust and dirt.
-- Near any appliance generating a strong magnetic field.
-- In direct sunlight.
Viewing 3D PROJECTOR using the 3D function
IMPORTANT SAFETY INFORMATION. READ THE FOLLOWING WARNINGS BEFORE YOU OR YOUR CHILD USE THE 3D FUNCTION.
Warning
™™ Children and teenagers may be more susceptible to health issues
associated with viewing in 3D and should be closely supervised
when viewing these images.
Photosensitive Seizure Warning and Other Health Risks
™™ Some viewers may experience an epileptic seizure or stroke when
exposed to certain flashing images or lights contained in certain
Projector pictures or video games. If you suffer from, or have a
family history of epilepsy or strokes, please consult with a medical
specialist before using the 3D function.
™™ Even those without a personal or family history of epilepsy or
stroke may have an undiagnosed condition that can cause photosensitive epileptic seizures.
Downloaded from ProjectorsManual.com
Manuals
4
English
Usage Notice
™™ Pregnant women, the elderly, sufferers of serious medical conditions, those who are sleep deprived or under the influence of
alcohol should avoid utilizing the unit’s 3D functionality.
™™ If you experience any of the following symptoms, stop viewing 3D
pictures immediately and consult a medical specialist: (1) altered
vision; (2) light-headedness; (3) dizziness; (4) involuntary movements such as eye or muscle twitching; (5) confusion; (6) nausea;
(7) loss of awareness; (8) convulsions; (9) cramps; and/ or (10)
disorientation. Children and teenagers may be more likely than
adults to experience these symptoms. Parents should monitor
their children and ask whether they are experiencing these symptoms.
™™ Viewing 3D PROJECTOR may also cause motion sickness, perceptual after effects, disorientation, eye strain and decreased postural stability. It is recommended that users take frequent breaks
to lessen the potential of these effects. If your eyes show signs of
fatigue or dryness or if you have any of the above symptoms, immediately discontinue use of this device and do not resume using
it for at least thirty minutes after the symptoms have subsided.
™™ Watching 3D PROJECTOR while sitting too close to the screen
for an extended period of time may damage your eyesight. The
ideal viewing distance should be at least three times the screen
height. It is recommended that the viewer's eyes are level with the
screen.
™™ Watching 3D PROJECTOR while wearing 3D glasses for an
extended period of time may cause a headache or fatigue. If you
experience a headache, fatigue or dizziness, stop viewing 3D
PROJECTOR and rest.
™™ Do not use the 3D glasses for any other purpose than for viewing
3D PROJECTOR. Wearing the 3D glasses for any other purpose
(as general spectacles, sunglasses, protective goggles, etc.) may
be physically harmful to you and may weaken your eyesight.
™™ Viewing in 3D may cause disorientation for some viewers. Accordingly, DO NOT place your 3D PROJECTOR near open stairwells,
cables, balconies, or other objects that can be tripped over, run
into, knocked down, broken or fallen over.
Downloaded from ProjectorsManual.com Manuals
5
English
Usage Notice
Eye Safety Warnings
▀■
Avoid staring/facing directly into the projector beam at all
times. Keep your back to the beam as much as possible.
▀■
When projector is used in a classroom, adequately supervise
students when they are asked to point out something on the
screen.
▀■
In order to minimize the lamp power, use room blinds to reduce ambient light levels.
Downloaded from ProjectorsManual.com
Manuals
6
English
Introduction
Package Overview
Unpack and inspect the box contents to ensure all parts listed
below are in the box. If something is missing, please contact
Optoma customer service.
NOTE
Projector with lens cap
Power Cord 1.8m
IR Remote Control
2 × AAA Batteries
™™ Due to different
applications in
each Country,
some regions
may have different accessories.
Documentation:
User’s Manual
Warranty Card
Quick Start Card
WEEE Card
Downloaded from ProjectorsManual.com Manuals
7
English
Introduction
Product Overview
Main Unit
1
2
3
4
3
6
5
7
8
6
7
6
9
10
11
6
1. Ventilation (outlet)
2. Focus Ring
3. IR Receiver
4. Ventilation (inlet)
5. Zoom Ring
6. Tilt-Adjustment Feet
7. Zoom Lens
Downloaded from ProjectorsManual.com
Manuals
8
English
8. Lens Cap
9. Power Socket
10.Input / Output Connections
11.KensingtonTM Lock Port
Introduction
Connection Ports
1
2
3
4
5
6
7
3D SYNC
12V Trigger
Out (5V)
HDMI 1
8
HDMI 2
Y G
VGA YPbPr
Pb B
Pr R
VIDEO
SERVICE
RS-232
9
12V OUT
POWER
11
10
12
13
14
15
1. HDMI1 Input Connector
2. HDMI2 Input Connector
3. VGA-In/YPbPr Connector
(PC Analog Signal/Component Video Input/HDTV/YPbPr)
4. Component Video Input Connector
5. Composite Video Input Connector
6. 3D Sync Out (5V) Connector
7. 12V Trigger Relay (12V, 250mA)
8. Lamp LED
(Indicates the projector’s lamp status)
9. Temp LED (Indicates the projector’s temperature status)
10.Power Socket
11.USB Service
12.RS-232 Connector (9-pin)
13.KensingtonTM Lock Port
14.Power LED
(Indicates the projector’s status)
15.Power Button
Downloaded from ProjectorsManual.com Manuals
9
English
Introduction
Remote Control
1
21
1. Power On
2. Power Off
3. 16:9
2
20
3
19
4
18
5
17
6
16
7
15
8
4. Native
5. PureEngine
6. 3D Format
7. Enter
8. Re-Sync
9. VGA Source
10.Video Source
11.HDMI 2 Source
12.YPbPr Source
13.HDMI 1 Source
14.Menu
15.Source
22
14
16.Lamp Mode
17.Contrast
18.Brightness
19.LBX
13
9
12
10
11
Downloaded from ProjectorsManual.com
Manuals
10
English
20.4:3
21.Mode
22.Four Directional Select Keys
Installation
Connecting the Projector
Connect to Computer/Notebook
3D Glasses
+12V Output
MOLEX
2
3
4
5
6
1
3D SYNC
Out (5V)
HDMI 1
HDMI 2
VGA YPbPr
Y G
Pb B
Pr R
VIDEO
SERVICE
12V Trigger
7
RS-232
molex
POWER
R
PS50426E
NOTE
™™ Due to the
difference in applications for each
country, some
regions may have
different accessories.
™™ * Optional Accessory
1. Power Cord
2. DVI/HDMI Cable *
3. VGA Cable *
4. USB Cable *
5. Emitter Cable *
6. 12V DC Plug *
7. RS232 Cable *
Downloaded from ProjectorsManual.com Manuals
11
English
Installation
Connect to Video
DVD Player, Set-top Box,
HDTV receiver
3D Glasses
3
2
5
6
4
3D SYNC
Out (5V)
1
HDMI 1
HDMI 2
VGA YPbPr
Y G
Pb B
Pr R
VIDEO
12V Trigger
SERVICE
RS-232
POWER
R
NOTE
PS50426E
™™ Due to the
difference in applications for each
country, some
regions may have
different accessories.
™™ 12V Trigger is
programmable
trigger.
™™ For more detailed
information about
connecting to the
3D emitter and 3D
glasses, please
refer to their
user’s guides.
™™ Use high speed
HDMI cable to
connect Blue-ray
3D player.
™™ * Optional Accessory
Composite Video Output
7
3
DVD Player, Set-top Box,
HDTV receiver
1. Power Cord
2. HDMI Cable *
3. RCA Component Cable for YPbPr *
4. VGA to RCA Component Cable for YPbPr *
5. Emitter Cable *
6. 12V DC Plug*
7. Composite Video Cable *
Downloaded from ProjectorsManual.com
Manuals
12
English
Installation
Connect to 3D Video Devices
NOTE
™™ The 3D video
source device
must be powered
on before the 3D
projector.
NOTE
™™ If input video is
normal 2D, please
press “3D Format”
and switch to
“Off”.
™™ If “SBS Mode” is
active, 2D video
content will not
display correctly.
Once you have connected your devices together with HDMI
cables, as shown in the diagram, you are ready to begin.
Power ON your 3D video source and your 3D projector.
PlayStation® 3 Games
yy
Make sure that you have updated your console to the latest software version in PlayStation® 3.
yy
Go to the “Settings menu -> Display settings -> Video output -> HDMI”.
Select “Automatic” and follow the on-screen instructions.
yy
Insert your 3D game disc. Alternatively you can download games (and 3D
updates) via the PlayStation® network.
yy
Launch the game. In the in-game menu, select “Play in 3D”.
Blu-ray 3D™ Player
yy
Make sure that your player can support 3D Blu-ray™ disc and that 3D
output is enabled.
yy
Insert the 3D Blu-ray™ disc into the player, press “Play”.
3D TV (e.g. SKY 3D, DirecTV)
yy
Contact your TV service provider to enable any 3D channels on your
channel package.
yy
Once enabled, switch to the 3D channel.
yy
You should see two images side-by-side.
yy
Switch to the “SBS Mode” of the 3D projector. The option is located in the
“Display” section of the projector OSD menu.
3D Device (e.g. 3D DV/DC) with 2D 1080i side by side signal output
yy
Connect your 3D device and switch to out 3D content with 2D side-by-side
output to 3D Projector.
-- You should see two images side-by-side.
yy
Switch to the “SBS Mode” of the 3D projector. The option is located in the
“Display” section of the projector OSD menu.
If watching 3D content from an HDMI 1.4a source (e.g. 3D Blu-ray) your 3D
glasses should always be in sync. If watching 3D content from an HDMI 1.3
source (e.g. 3D broadcast using SBS mode) it may be necessary to use the
projector’s 3D Sync-Invert option to optimize your 3D experience. The option
is located in the “Display ->3D” section of the projector OSD menu.
Downloaded from ProjectorsManual.com Manuals
13
English
Installation
3D Broadcast
3D Blu-ray™ Disc
SKY+HD, cable/satellite
box
3D Blu-ray™ Player
3D Console Games
PlayStation® 3
3D Glasses
Full 3D 1080p DLP® Projector
All other product names, company names and trade names used herein are for identifications purposes
only and may be trademarks or registered trademarks of their respective owners. All images have been
simulated.
Downloaded from ProjectorsManual.com
Manuals
14
English
Installation
NOTE
™™ For more detailed
information,
please refer to
3D glasses user’s
guide.
Using the 3D glasses
1. To turn ON 3D glasses: Press the “Power” button and the LED will flash
one time indicating the glasses are ready to use 3D mode.
2. Verify that 3D content is being sent to the projector and signal is compatible with projector specifications.
3. Turn on the “3D Mode” (DLP-Link/VESA 3D - depending on which type
of glasses you are using) of the 3D projector. The option is located in the
“Display” section of the projector OSD menu.
4. Turn on 3D glasses and verify image appears in 3D without eyestrain.
5. If the image does not appear in 3D, please check 3D device set up well
to send out 3D image or not. Or “SBS Mode” should turn on when input
signal is 2D 1080i side-by-side and repeat previous steps 1 ~ 4.
6. To use projector’s “3D Sync-Invert” option to optimize your 3D experience.
The option is located in the “Display” section of the projector OSD menu.
7. To turn OFF 3D glasses: Press the “Power” button and hold until the LED
switches off.
8. For more detailed information, please refer to the 3D glasses user’s
guide, or manufacturer's Website.
Downloaded from ProjectorsManual.com Manuals
15
English
Installation
Powering On/Off the Projector
Powering On the Projector
1. Remove the lens cap. 
2. Securely connect the power cord and signal cable. When connected, the Power LED will turn red.
3. Turn on the lamp by pressing “POWER” button on the back of the
projector or pressing “ ” button on the remote control. The Power
LED will flash blue. 
The startup screen will display in approximately 30 seconds. The
first time you use the projector, you can select your preferred language from quick menu after the startup screen display.
4. Turn on your source that you want to display on the screen (computer, notebook, video player, etc). The projector will detect the
source automatically and will display on the screen. If not, push
menu button and go to “SETUP”. Make sure that the “Source
Lock” has been set to “Off”.
™™ If you connected multiple sources at the same time, press the
“SOURCE” button or direct source keys on the remote control to
switch between inputs.
3D SYNC
Out (5V)
VGA YPbPr
Y G
Pb B
Pr R
VIDEO
SERVICE
12V Trigger
RS-232
or
NOTE
POWER
™™ Turn on the
projector first and
then select the
signal sources.
2
Power/Standby
1
Downloaded from ProjectorsManual.com
Manuals
16
English
Lens Cap
Installation
Powering off the projector
1. Press the “ ” button on the remote control or “POWER” button
on the back of the projector two times with one second interval to
turn off the projector. First time, it will display the following message on the screen.
Press the “ ” button again to confirm the shut down. If the button
is not pressed, the message will disappear after 15 seconds.
2. The cooling fans continue to operate for about 60 seconds for
cooling cycle and the Power LED will turn blue and flashing. When
the lights solid red, the projector has entered standby mode.
If you wish to turn the projector back on, you must wait until
the projector has completed the cooling cycle and has entered
standby mode. Once in standby mode, simply press “POWER”
button or “ ” button to restart the projector.
3. Disconnect the power cord from the electrical outlet and from the
projector.
4. Do not turn on the projector immediately following the power off
procedure.
Warning Indicator
NOTE
™™ Contact the nearest service center
if the projector
displays these
symptoms.
™™ When the “LAMP” indicator is lit orange, the projector will shut
down automatically. Please call the nearest Optoma facility for
assistance.
™™ When the “TEMP” indicator turns red, it indicates the projector has
overheated. The projector will shut down automatically.
Under normal conditions, the projector can be switched on again
after it has cooled down.
™™ When the “TEMP” indicator flashes red, it indicates the fan has
failed.
™™ After the projector has cooled down, you can press and hold “
” button on the remote control for 10 seconds to leave failure
mode to standby mode.
Downloaded from ProjectorsManual.com Manuals
17
English
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height
The projector is equipped with elevator feet for adjusting the
image height.
1. Locate the adjustable foot you wish to modify on the underside of
the projector.
2. Rotate the adjustable ring clockwise to raise the projector or
counter clockwise to lower it. Repeat with the remaining feet as
needed.
Tilt-Adjustment Feet
Tilt-Adjustment Ring
Adjusting the Projector’s Zoom / Focus
You may turn the zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear.
The projector will focus at distances from 4.92 to 32.8 feet (1.0
to 10.0 meters).
Focus Ring
Zoom Ring
Downloaded from ProjectorsManual.com
Manuals
18
English
Installation
Adjusting Projection Image Size
Top View
Screen
Screen (W)
Dia
go
Height
Projection Distance (D)
Screen
Side View
na
l
Width
Screen (H)
Offset (Hd)
Projection Distance (D)
Diagonal length
(inch) size of
16:9 Screen
Screen Size W x H
(m)
Projection Distance (D)
(feet)
(m)
Offset (Hd)
(feet)
Width
Height
Width
Height
wide
tele
wide
tele
(m)
(feet)
38
0.84
0.47
2.76
1.55
--
1.51
--
4.97
0.08
0.25
45
1.00
0.56
3.27
1.84
1.49
1.79
4.89
5.88
0.09
0.29
50
1.11
0.62
3.63
2.04
1.66
1.99
5.45
6.54
0.10
0.33
60
1.33
0.75
4.36
2.45
1.99
2.39
6.54
7.84
0.12
0.39
70
1.55
0.87
5.08
2.86
2.32
2.79
7.63
9.15
0.14
0.46
80
1.77
1.00
5.81
3.27
2.66
3.19
8.72
10.46
0.16
0.52
90
1.99
1.12
6.54
3.68
2.99
3.59
9.81
11.77
0.18
0.59
100
2.21
1.25
7.26
4.09
3.32
3.98
10.89
13.07
0.20
0.65
120
2.66
1.49
8.72
4.90
3.98
4.78
13.07
15.69
0.24
0.78
150
3.32
1.87
10.89
6.13
4.98
5.98
16.34
19.61
0.30
0.98
200
4.43
2.49
14.53
8.17
6.64
7.97
21.79
26.15
0.40
1.31
300
6.64
3.74
21.79
12.26
9.96
--
32.68
--
0.60
1.96
NOTE
™™ This graph is for
user’s reference
only.
Downloaded from ProjectorsManual.com Manuals
19
English
User Controls
Remote Control
Using the Remote Control
Power On
Turn on the projector.
Power Off
Turn off the projector.
Lamp Mode
Increase the brightness of the image.
Mode
Select the display mode from Cinema,
Bright, Photo, Reference, 3D, ISF Day, ISF
Night and User.
4:3
Scale the image to 4:3 aspect ratio.
16:9
Scale the image to 16:9 aspect ratio.
LBX
Enable the viewing of the letterboxed nonanamorphically enhanced movie at full screen
width. Part of the original image will be lost if
the image aspect ratio is less than 2.35:1.
Native
The input source will be displayed without
scaling.
Brightness
Adjust the brightness of the image.
Contrast
Control the degree of difference between the
lightest and darkest parts of the picture.
PureEngine
The PureEngine is a collection of advanced
image processing technologies that
enhances the quality of the displayed image.
3D Format
Press “3D Format” to switch between “Off”
and “SBS”, use up/down button to switch to
“Top and Bottom” or “Frame Sequential then
press “Enter” to confirm.
Downloaded from ProjectorsManual.com
Manuals
20
English
User Controls
Using the Remote Control
Enter
Confirm your item selection.
Source
Press “Source” to select an input signal.
Re-sync
Automatically synchronizes the projector to
the input source.
Menu
Display or exit the on-screen display menus
for projector.
HDMI 1
Press “HDMI 1” to choose source from
HDMI 1 connector.
HDMI 2
Press “HDMI 2” to choose source from
HDMI 2 connector.
VGA
Press “VGA” to choose source from
VGA/YPbPr connector.
YPbPr
Press “YPbPr” to choose Component Video
source.
Video
Press “Video” to choose Composite video
source.
Four
Directional
Select Keys
Use
to select items or make
adjustments to your selection.
Downloaded from ProjectorsManual.com Manuals
21
English
User Controls
On-screen Display Menus
The Projector has multilingual On-screen Display menus that
allow you to make image adjustments and change a variety of
settings. The projector will automatically detect the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Control or
Control Panel.
2 When OSD is displayed, use ▲▼ keys to select any item in the
main menu. While making a selection on a particular page, press
► or “Enter” key to enter sub menu.
3. Use ▲▼ keys to select the desired item in the sub menu and then
press ► or “Enter” key to view further settings. Adjust the settings
by ◄► key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Enter” or “Menu” to confirm, and the screen will return to
the main menu.
6. To exit, press “Menu” again. The OSD menu will close and the
projector will automatically save the new settings.
Main Menu
Settings
Sub Menu
Downloaded from ProjectorsManual.com
Manuals
22
English
User Controls
Menu Tree
Main Menu
Sub Menu
IMAGE
Display Mode
Settings
Contrast
Brightness
Sharpness
#1
Color
#1
Tint
Advanced
Cinema / Bright / Photo / Reference / 3D /
ISF Day / ISF Night / User
-50~50
-50~50
0~15
-50~50
-50~50
0~10
Film / Video / Graphics / Standard
PureDetail / PureColor / PureMotion /
PureEngine Demo / Exit
Noise Reduction
Gamma
PureEngine
Color Settings
Color Temp.
RGB Gain/Bias
Warm / Medium / High
Red Gain / Green Gain / Blue Gain / Red
Bias / Green Bias / Blue Bias / Reset / Exit
Color Space
AUTO / RGB / YUV
#2
AUTO / RGB(0-255) / RGB(16-235) / YUV
#3
4:3 / 16:9 / LBX / Native
4:3 / SuperWide
0~10
0~5
-50~50
-30~30
Off / On (16:9) / On (2.35:1) / Auto
DLP-Link / VESA 3D
3D / L / R
Off / SBS / Top and Bottom / Frame
Sequential
On / Off
Exit
DISPLAY
Format
#4
Zoom
EdgeMask
V Image Shift
V Keystone
SuperWide
3D
3D Mode
3D -> 2D
3D Format
#5
SYSTEM
Menu Location
Lamp Settings
3D Sync. Invert
Exit
Lamp Hours
Lamp Reminder
Lamp Mode
Lamp Reset
Exit
On / Off
STD / Bright / Image AI
Cancel / Yes
Projection
Test Pattern
Background Color
12V Trigger
Downloaded from ProjectorsManual.com Manuals
Off / Grid / White Pattern
Dark Blue / Grey / Black
On / Off
23
English
User Controls
Main Menu
Sub Menu
SETUP
Language
Settings
Input Source
Source Lock
High Altitude
Information Hide
Auto Power Off (min.)
Signal (VGA)
Signal (Video)
Reset
NOTE
Frequency
Phase
H. Position
V. Position
Automatic
Exit
White Level
Black Level
Saturation
Hue
IRE
Exit
Current
All
English / Deutsch / Français / Italiano /
Español / Português / Svenska /
Nederlands / Norsk/Dansk / Polski /
Ɋɭɫɫɤɢɣ / Suomi /İȜȜȘȞȚțȐ / Magyar /
ýeština / ϲΑήϋ / ᜗᧯խ֮ʳ/ 亞᫿խ֮ʳ/ ֲ‫ء‬
፿ʳ/ ᾂ᝖᱑ʳ/ Türkçe / ࡷࡎ࡙
HDMI 1 / HDMI 2 / Componet / VGA /
Video / Exit
On / Off
On / Off
On / Off
0~180
0~100
-50~50
-50~50
-50~50
Enable / Disable
-50~50
-50~50
-50~50
-50~50
0 / 7.5
Cancel / Yes
Cancel / Yes
Please note that the on-screen display (OSD) menus vary according to the
signal type selected and the projector model you are using.
(#1) “Color” and “Tint” are only supported in Video mode.
(#2) For HDMI model only.
(#3) For SurperWide is “Off”.
(#4) For SurperWide is “On”.
(#5) “3D Sync Invert” is only available when 3D is enabled.
Downloaded from ProjectorsManual.com
Manuals
24
English
User Controls
IMAGE
NOTE
™™ “ISF Day” and
“ISF Night” will
not be shown
when the ISF
modes have not
been calibrated.
Display Mode
There are many factory presets optimized for various types of
images.
`` Cinema: For home theater.
`` Reference: This mode is intended to reproduce, as close
as possible, the image the way the movie director intended.
Color, color temperature, brightness, contrast and gamma settings are all configured to standard reference levels. PureEngine Image processing is disabled.
`` Photo: Optimized for displaying photographic images.
`` Bright: Maximum brightness from PC input.
`` 3D: Recommended setting for 3D mode enabled. Any further
adjustments by the user in 3D will be saved in this mode for
further use.
`` ISF Day: Optimize the image with the ISF Day mode to be
perfectly calibrated and high picture quality.
`` ISF Night: Optimize the image with the ISF Night mode to be
perfectly calibrated and high picture quality.
`` User: User’s settings.
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
Downloaded from ProjectorsManual.com Manuals
25
English
User Controls
NOTE
™™ “Color” and “Tint”
are only supported for composite
and component
sources.
`` Press the ◄ to decrease the contrast.
`` Press the ► to increase the contrast.
Brightness
Adjust the brightness of the image.
`` Press the ◄ to darken image.
`` Press the ► to lighten the image.
Color
Adjust a video image from black and white to fully saturated color.
`` Press the ◄ to decrease the color saturation in the image.
`` Press the ► to increase the color saturation in the image.
Tint
Adjust the color balance of red and green.
`` Press the ◄ to increase the amount of green in the image.
`` Press the ► to increase the amount of red in the image.
Sharpness
Adjust the sharpness of the image.
`` Press the ◄ to decrease the sharpness.
`` Press the ► to increase the sharpness.
Downloaded from ProjectorsManual.com
Manuals
26
English
User Controls
IMAGE | Advanced
Noise Reduction
The Noise Reduction reduces the amount of visible noise interlaced signals. The range is from “0” to “10”. (0: Off)
Gamma
This allows you to set up gamma curve type. After the initial setup
and fine tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
`` Film: for home theater.
`` Video: for video or TV source.
`` Standard: for standardized setting.
`` Graphics: for image source.
PureEngine
The PureEngine is a collection of advanced image processing
technologies that enhances the quality of the displayed image.
Color Settings
Press ► into the next menu and then use ▲ or ▼ to select item.
Downloaded from ProjectorsManual.com Manuals
27
English
User Controls
IMAGE | Advanced | PureEngine
PureDetail
PureDetail is an edge enhancement tool that enables the edges in
the projected image is be enhanced thus providing more perceived detail.
PureColor
This adjustable item utilizes a new color-processing algorithm and
enhancements to enable the picture’s vividness to be significantly
increased. The range is from “0” to “5”.
PureMotion
NOTE
PureMotion uses sophisticated algorithms to ensure that the natural motion in the image is preserved.
PureEngine Demo
™™ While the input
source is 120Hz
timing, the PureMotion function
does not support
this timing and will
be gray out.
This feature enables you to see the difference in the image quality
between the raw unprocessed image and the image processed as
processed by the PureEngine. Use this mode to check the adjustments that you make to the PureEngine settings.
Downloaded from ProjectorsManual.com
Manuals
28
English
User Controls
IMAGE | Advanced | Color Settings
Color Temperature
If set to cold temperature, the image looks more blue. (cold image)
If set to warm temperature, the image looks more red. (warm image)
RGB Gain/Bias
Press ► into the next menu and then use ▲ or ▼ to select item.
`` Use ◄ or ► to select Red, Green, or Blue for brightness
(Gain) and contrast (Bias).
`` Reset: Choose “Yes” to return the factory default settings for
color adjustments.
Downloaded from ProjectorsManual.com Manuals
29
English
User Controls
NOTE
™™ (*) For HDMI only.
Color Space
Select an appropriate color matrix type from AUTO, RGB,
RGB(0-255)(*) RGB(16-235)(*) or YUV.
Downloaded from ProjectorsManual.com
Manuals
30
English
User Controls
DISPLAY
Format
Use this function to choose your desired aspect ratio.
`` 4:3: This format is for 4x3 input sources.
`` 16:9: This format is for 16x9 input sources, like HDTV and
DVD enhanced for Widescreen TV.
`` LBX: This format is for non-16x9, letterbox source and for users who use external anamorphic lens to display 2.35:1 aspect
ratio using full resolution.
`` Native: This format displays the original image without scaling.
`` AUTO: Automatically selects the appropriate display format.
Detail informations about LBX mode:
1. Some Letter-Box Format DVDs are not enhanced for 16x9
TVs. In this situation, the image will not look right when displayed in 16:9 mode. In this situation, please try to using the
4:3 mode to view the DVD. If the content is not 4:3, there will
be black bars around the image in 16:9 display. For this type
of content, you can use LBX mode to fill the image on the 16:9
display.
2. If you use an external anamorphic lens, this LBX mode also
allows you to watch a 2.35:1 content (include Anamorphic
DVD and HDTV film source) that support anamorphic wide
is enhanced for 16x9 Display in a wide 2.35:1 image. In this
case, there are no black bars. Lamp power and vertical resolution are fully utilized.
Downloaded from ProjectorsManual.com Manuals
31
English
User Controls
16:9 Screen
480i/p
576i/p
4:3
1080i/p
720p
PC
1440 x 1080 center
16:9
1920 x 1080 center
LBX
1920 x 1440 center, then get the central 1920 x 1080
image to display
Native
No resize image, 1:1 mapping and centered. This format
shows original image without scaling.
Auto
If this format is select, Screen type will auto become 16:9
(1920x1080)
If source is 4:3, auto resize to 1440 x1080
If source is 16:9 auto resize to 1920x1080
If source is 16:10 auto resize to 1920 x 1200 and cut
1920x1080 area to display
Zoom
`` Press the ◄ to reduce the size of an image.
`` Press the ► to magnify an image on the projection screen.
Edge Mask
Edge mask function removes the noise in a video image. Edge
mask the image to remove video encoding noise on the edge of
video source.
V Image Shift
Shift the projected image position vertically.
NOTE
™™ “SuperWide” is
Off“ as default.
™™ How to use “Super-Wide”:
1. Obtain a 2.0:1
aspect ratio
screen.
2. Switch SuperWide ON.
3. Align the
projector image
correctly on the
screen.
4. Enjoy movies
without black
bars.
V Keystone
Press the ◄ or ► to adjust image distortion vertically and make a
squarer image.
SuperWide
SuperWide is a feature that uses a special 2.0:1 aspect ratio
screen enabling both 16:9 and 2.35:1 aspect ratio movies to be
shown without black bars at the top and bottom of the screen.
`` Off: Your desired aspect ratio can be selected 4:3, 16:9, LBX
and Native.
`` Auto: To solve the differences of the film formats, the option
can keep the format in the same ratio.
`` On (16:9): Only 16:9 format can be selected.
`` On (2.35:1) Only 2.35:1 format can be selected.
3D
Press ► into the next menu and then use ▲ or ▼ to select item.
Downloaded from ProjectorsManual.com
Manuals
32
English
User Controls
DISPLAY | 3D
3D Mode
`` DLP Link: Select “DLP Link” to use optimized settings for DLP
Link 3D Glasses. (please refer to page 15).
`` VESA 3D: Select “VESA 3D” to use optimized setting for VESA
3D Glasses. (please refer to page 13).
3D -> 2D
NOTE
`` 3D: Display 3D signal.
`` L (Left): Display the left frame of 3D content.
`` R (Right): Display the right frame of 3D content.
3D Format
™™ “3D Format” is
only supported on
non-HDMI 1.4a
3D timing.
™™ Press “Enter” to
select 3D format.
``
``
``
``
Off: Press the “Off” to disable 3D format conversion.
SBS: Display 3D signal in “Side-by-Side” format.
Top and Bottom: Display 3D signal in “Top and Bottom” format.
Frame Sequential: Display 3D signal in “Frame Sequential”
format.
Downloaded from ProjectorsManual.com Manuals
33
English
User Controls
NOTE
™™ “3D sync. Invert”
function wouldn’t
save the setting.
It will set to “Off”
when powers
on and changes
source.
3D Sync. Invert
`` Press the “On” to invert left and right frame contents.
`` Press the “Off” for default frame contents.
Downloaded from ProjectorsManual.com
Manuals
34
English
User Controls
SYSTEM
NOTE
Menu Location
Choose the menu location on the display screen.
™™ Rear-Desktop
and Rear-Ceiling
are to be used
with a translucent
screen.
Lamp Setting
Press ► into the next menu and then use ▲ or ▼ to select item.
Projection
``
Front-Projection
This is the default selection. The image is projected straight on
the screen.
``
Rear-Desktop
When selected, the image will appear reversed.
``
Front-Ceiling
When selected, the image will turn upside down.
``
NOTE
™™ “Test Pattern”
function will gray
out when 3D
is on.
Rear-Ceiling
When selected, the image will appear reversed in upside down
position
Test Pattern
Display a test pattern. There are Grid, White and Off.
Downloaded from ProjectorsManual.com Manuals
35
English
User Controls
Background Color
Use this feature to display a “Blue”, “Black”, or “Gray” screen
when no signal is available.
12V Trigger
`` Press the “Off” to disable the trigger.
`` Press the “On” to enable the trigger and the programmable
sub-menu. The sub-menu is accessed by selecting the “On”
option then pressing the “Enter” button on the remote control.
Checking an option in the sub-menu will activate the trigger
when the corresponding display mode is selected. For the example, 4:3 has been selected – this means that Trigger B will
be active when the projector display mode is set to 4:3. The
trigger will be inactive for all the other display mode options.
Downloaded from ProjectorsManual.com
Manuals
36
English
User Controls
SYSTEM | Lamp Settings
Lamp Hour
Display the cumulative lamp operating time.
Lamp Reminder
Choose this function to show or to hide the warning message
when the changing lamp message is displayed. The message will
appear up 30 hours before suggested replacement of lamp.
NOTE
™™ “Lamp Mode” can
be indipendently
set for 2D and 3D.
Lamp Mode
`` Bright: Choose “Bright” to increase the brightness.
`` STD: Choose “STD” to dim the projector lamp which will lower
power consumption and extend the lamp life.
`` Image AI
Image AI improves the contrast of the picture by optimizing the
brightness of the lamp according to the picture content.
Lamp Reset
Reset the lamp life hour after replacing the lamp.
Downloaded from ProjectorsManual.com Manuals
37
English
User Controls
SETUP
Language
Choose the multilingual OSD menu. Press ◄ or ► into the sub
menu and then use the ▲ or ▼ to select your preferred language.
Press “Select (Enter)” to finalize the selection.
Input Source
Use this option to enable / disable input sources. Press ► into the
next menu and then use ▲ or ▼ to select item. Press “Select (Enter)” to finalize the selection. The projector will not search inputs
that are de-selected.
Downloaded from ProjectorsManual.com
Manuals
38
English
User Controls
Source Lock
`` On: The projector will only search current input connection.
`` Off: The projector will search for other signals if the current
input signal is lost.
High Altitude
Choose “On” to turn on High Altitude mode. Operates the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Information Hide
`` Press “On” to hide the info message.
`` Press “Off” to show the “searching” message.
Auto Power Off
Set the interval of power-off of the system, if there is no signal
input. (In minutes).
Signal
Press ► into the next menu and then use ▲ or ▼ to select item.
Reset
Return the adjustments and settings to factory default values.
`` Current: Reset current signal’s settings to factory default
values.
`` All: Return the settings for all menus to factory default values.
Downloaded from ProjectorsManual.com Manuals
39
English
User Controls
SETUP | Signal -RGB Source
NOTE
™™ “Signal” is only
supported in Analog VGA (RGB)
signal.
Frequency
Change the display data frequency to match the frequency of your
computer’s graphic card. Use this function only if the image appears to flicker vertically.
Phase
Synchronize the signal timing of the display with the graphic card.
If the image appears to be unstable or flickers, use this function to
correct it.
H. Position
`` Press the ◄ to move the image left.
`` Press the ► to move the image right.
V. Position
`` Press the ◄ to move the image down.
`` Press the ► to move the image up.
Automatic
Automatically selects the signal. If you use this function, the
Frequency and Phase items are grayed out, and if Signal is not
automatic, the Frequency and Phase items will appear for user to
manually tune and saved in settings after that for next time projector turns off and on again.
Downloaded from ProjectorsManual.com
Manuals
40
English
Appendices
SETUP | Signal -Video Source
NOTE
™™ “Signal” is not
supported when
the source is
HDMI or DVI-D.
™™ “IRE” is only supported on NTSC
signal.
White Level
Allow user adjust White Level when inputting S-Video or Video/
CVBS signals.
Black Level
Allow user adjust Black Level when inputting S-Video or Video/
CVBS signals.
Saturation
Adjust a video image from black and white to fully saturated color.
`` Press the ◄ to decrease the amount of color in the image.
`` Press the ► to increase the amount of color in the image.
Hue
Adjust the color balance of red and green.
`` Press the ◄ to increase the amount of green in the image.
`` Press the ► to increase the amount of red in the image.
IRE
`` Adjust measurement of composite video signals.
Downloaded from ProjectorsManual.com Manuals
41
English
Appendices
Troubleshooting
If you experience a problem with your projector, please refer to
the following information. If a problem persists, please contact
your local reseller or service center.
Image Problems
No image appears on-screen
`` Ensure all the cables and power connections are correctly and
securely connected as described in the “Installation” section.
`` Ensure the pins of connectors are not crooked or broken.
`` Check if the projection lamp has been securely installed.
Please refer to the “Replacing the Lamp” section.
`` Make sure you have removed the lens cap and the projector is
switched on.
Image is out of focus
`` Make sure the Lens cap is removed.
`` Adjust the Focus Ring on the projector lens.
`` Make sure the projection screen is between the required distance 4.9 to 32.8 feet (1.5 to 10.0 meters) from the projector.
The image is stretched when displaying 16:9 DVD title
`` When you play anamorphic DVD or 16:9 DVD, the projector
will show the best image in 16: 9 format on projector side.
`` If you play the LBX format DVD title, please change the format
as LBX in projector OSD.
`` If you play 4:3 format DVD title, please change the format as
4:3 in projector OSD.
`` If the image is still stretched, you will also need to adjust the
aspect ratio by referring to the following:
`` Please setup the display format as 16:9 (wide) aspect ratio
type on your DVD player.
Image is too small or too large
`` Adjust the zoom lever on the top of the projector.
`` Move the projector closer to or further from the screen.
`` Press “Menu” on the projector panel, go to “Display-->Format”.
Try the different settings.
Downloaded from ProjectorsManual.com
Manuals
42
English
Appendices
Image has slanted sides:
`` If possible, reposition the projector so that it is centered on the
screen and below the bottom of the screen.
`` Use “Display-->V Keystone” from the OSD to make an adjustment.
Image is reversed
`` Select “System-->Projection” from the OSD and adjust the
projection direction.
Blurry double image
`` Press “3D Format” button and switch to “Off” to avoid normal
2D image is blurry double image.
Two images, side-by-side format
`` Press “3D Format” button and switch to “SBS” for input signal
is HDMI 1.3 2D 1080i side-by-side.
Image does not display in 3D
`` Check if the battery of 3D glasses is drained.
`` Check if the 3D glasses is turned on.
`` When the input signal is HDMI 1.3 2D (1080i side-by-side
half), press “3D Format” button and switch to “SBS”.
Downloaded from ProjectorsManual.com Manuals
43
English
Appendices
Other Problems
The projector stops responding to all controls
`` If possible, turn off the projector, then unplug the power cord
and wait at least 20 seconds before reconnecting power.
Lamp burns out or makes a popping sound
`` When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector
will not turn on until the lamp module has been replaced. To
replace the lamp, follow the procedures in the “Replacing the
Lamp” section.
Remote Control Problems
If the remote control does not work
`` Check the operating angle of the remote control is within ±15°
both horizontally and vertically of on of the IR receivers on the
projector.
`` Make sure there are not any obstructions between the remote
control and the projector. Move to within 6 m (20 ft) of the
projector.
`` Make sure batteries are inserted correctly.
`` Replace batteries if they are exhausted.
Downloaded from ProjectorsManual.com
Manuals
44
English
Appendices
LED Lighting Messages
Power LED
(Red)
Power LED
(Blue)
Temp LED
(Red)
Lamp LED
(Orange)
Steady light
Off
Off
Off
Power on (Warming)
Off
Flashing
Off
Off
Power on and Lamp lighting
Off
Steady light *
Off
Off
Power off (Cooling)
Off
Flashing
Off
Off
Error (Lamp fail)
Flashing
Off
Off
Steady light
Error (Fan fail)
Flashing
Off
Flashing
Off
Error (Over Temp.)
Flashing
Off
Steady light
Off
NOTE
Message
™™ Power LED on:
No signal; OSD
menu appears
and signal had
been detected.
Standby State
(Input power cord)
™™ Power LED off:
Signal had been
detected but OSD
menu disappears.
3D SYNC
Out (5V)
3D SYNC
Out (5V)
VGA YPbPr
HDMI 1
HDMI 2
Y G
VGA YPbPr
Pb B
Y G
Pb B
Pr R
Pr R
VIDEO
12V Trigger
VIDEO
SERVICE
12V Trigger
RS-232
SERVICE
RS-232
POWER
POWER
Downloaded from ProjectorsManual.com Manuals
45
English
Appendices
On Screen Messages
™™ Power down timer active:
™™ Lamp warning:
™™ Power off:
Downloaded from ProjectorsManual.com
Manuals
46
English
Appendices
Replacing the Lamp
The projector automatically detects the lamp life. When the
lamp life is nearing the end of use, you will receive a warning
message.
When you see this message, please contact your local reseller or
service center to change the lamp as soon as possible. Make sure
the projector has been cooled down for at least 30 minutes before
changing the lamp.
Warning: If ceiling mounted, please use caution when opening the lamp access panel. It is recommended to wear safety
glasses if changing the bulb when ceiling mounted. “Caution
must be used to prevent any loose parts from falling out of
projector.”
Warning: Lamp compartment is hot! Allow it to cool down
before changing lamp!
Warning: To reduce the risk of personal injury, do not drop
the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.
Downloaded from ProjectorsManual.com Manuals
47
English
Appendices
1
NOTE
™™ The projector cannot be turned on
if the lamp cover
has not been
placed back on
the projector.
2
3
4
™™ Do not touch the
glass area of the
lamp. Hand oil
can cause the
lamp to shatter.
Use a dry cloth
to clean the
lamp module if it
was accidentally
touched.
Lamp Replacing Procedure:
1. Switch off the power to the projector by pressing the Power
button.
2. Allow the projector to cool down at least 30 minutes.
3. Disconnect the power cord.
4. Unscrew the two screws on the cover. 1
5. Lift up and remove the cover. 2
6. Use a screwdriver to remove the screw from the lamp module. 3
7. Pull out the lamp module. 4
To replace the lamp module, reverse the previous steps.
8. Turn on the projector and do “Lamp Reset” after the lamp module
is replaced.
Lamp Reset: (i)Press “Menu” -> (ii)Select “System” -> (iii)Select
“Lamp Settings” ->(iv)Select “Lamp Reset” -> (v)Select “Yes”.
Downloaded from ProjectorsManual.com
Manuals
48
English
Appendices
Compatibility Modes
™™ Computer Compatibility for PC
Signal
Resolution
Frequency H.
(KHz)
Refresh Rate
(Hz)
Video
Digital
Analog
NTSC
-
15.734
60
O
-
-
-
15.625
50
O
-
-
720 x 400
31.5
70
-
O
O
720 x 400
37.9
85
-
O
O
50
-
O
O
60
-
O
O
67
-
O
O
PAL/SECAM
720 x 576
640 x 480
31.5
640 x 480
VGA
SVGA
XGA
HD720
WXGA
WXGA-800
SXGA
640 x 480
37.9
72.8
-
O
O
640 x 480
37.5
75
-
O
O
640 x 480
43.3
85
-
800 x 600
35.2
56.3
-
O
O
800 x 600
37.9
60.3
-
O
O
800 x 600
46.9
75
-
O
O
800 x 600
48.1
72.2
-
O
O
800 x 600
53.7
85.1
-
1024 x 768
48.4
60
-
O
O
1024 x 768
56.5
70.1
-
O
O
1024 x 768
60
75
-
O
O
1024 x 768
68.7
85
-
1280 x 720
50
-
O
O
1280 x 720
60
-
O
O
O
92.62
120
-
O
O
1280 x 768
47.4
60
-
O
O
1280 x 768
75
-
1280 x 768
85
-
1280 x 800
60
-
O
O
O
O
1280 x 1024
64
60
-
O
O
1280 x 1024
80
75
-
O
O
60
-
O
O
60
-
O
O
1920 x 1080
24
-
O
O
1920 x 1080
50
-
O
O
1920 x 1080
60
-
O
O
1920 x 1200
60
-
1400 x 1050
UXGA
1600 x1200
WUXGA
O
1280 x 720
SXGA+
HD1080
O
75
Downloaded from ProjectorsManual.com Manuals
49
O
English
Appendices
Signal
HDTV
Resolution
Frequency H.
Refresh Rate
(KHz)
(Hz)
Video
Digital
Analog
1920 x 1080i
50
-
O
O
1920 x 1080i
60
-
O
O
1920 x 1080p
24
-
O
O
1920 x 1080p
50
-
O
O
1920 x 1080p
60
-
O
O
60
O
-
-
50
-
O
O
60
-
O
O
50
O
-
-
50
-
O
O
50
-
O
O
60
O
-
-
720 x 480i
60
-
O
O
720 x 480p
60
-
O
O
1280 x 720
45
1280 x 720p
1280 x 720p
720 x 576
31.3
720 x 576i
SDTV
720 x 576p
720 x 480
31.5
™™ Computer Compatibility for MAC
Macbook
compatibility
Macbook Pro
(Intel) compatibility
Power Mac G5
compatibility
Power Mac G4
compatibility
Resolution
Refresh
Rate
(Hz)
Digital
Analog
Digital
Analog
Digital
Analog
Digital
Analog
800 x 600
60
O
O
O
O
-
-
O
O
800 x 600
72
O
O
O
O
-
O
O
O
800 x 600
75
O
O
O
O
-
O
O
O
800 x 600
85
-
O
-
O
-
O
-
O
1024 x 768
60
O
O
O
O
-
O
O
O
1024 x 768
70
O
O
O
O
-
O
O
O
1024 x 768
75
O
O
O
O
-
O
O
O
1024 x 768
85
-
O
-
O
-
O
-
O
1280 x 720
60
O
O
O
O
-
O
O
O
1280 x 768
60
O
O
O
O
-
-
O
O
1280 x 768
75
-
O
-
O
-
O
-
O
1280 x 768
85
-
O
-
O
-
-
-
O
1280 x 800
60
O
O
-
O
-
O
O
O
1280 x 1024
60
O
O
-
O
-
O
O
O
1280 x 1024
75
O
O
-
O
-
O
O
O
1920 x 1080
60
O
O
-
O
-
O
O
O
1920 x 1200
60
-
O
-
O
-
O
-
O
Downloaded from ProjectorsManual.com
Manuals
50
English
Appendices
™™ 3D Input Video Compatibility
Input Timing
HDMI 1.4a 3D
Input
1280 x 720p @ 50Hz
Top-and-Bottom
1280 x 720p @ 60Hz
Top-and-Bottom
1280 x 720p @ 50Hz
Frame packing
1280 x 720p @ 60Hz
Frame packing
1920 x 1080i @ 50 Hz
Side-by-Side (Half)
1920 x 1080i @ 60 Hz
Side-by-Side (Half)
1920 x 1080p @ 24 Hz
Top-and-Bottom
1920 x 1080p @ 24 Hz
Input
Resolution
HDMI 1.3 3D
Content
2D Input (include
HDMI/VGA port)
2D Input (include
HDMI/VGA/
Component/
Composite port)
Frame packing
1920 x 1080i @ 50Hz
Side-by-Side (Half)
1920 x 1080i @ 60Hz
Side-by-Side (Half)
1280 x 720p @ 50Hz
Side-by-Side (Half)
1280 x 720p @ 60Hz
Side-by-Side (Half)
1920 x 1080i @ 50Hz
Top-and-Bottom
1920 x 1080i @ 60Hz
Top-and-Bottom
1280 x 720p @ 50Hz
Top-and-Bottom
1280 x 720p @ 60Hz
Top-and-Bottom
1024 x 768 @ 120Hz
Frame sequential
1024 x 768 @ 120Hz
Frame sequential
480i
HQFS
576i
HQFS
Downloaded from ProjectorsManual.com Manuals
51
While 3D Format is
“SBS”
While 3D Format is
“Top and Bottom”
Auto apply 3D
Mode
While 3D Format is
“Frame sequential”
English
Appendices
RS232 Commands and Protocol
Function List
RS232 Pin Assignments
1
3
6
Pin no.
5
8
Name
I/O (From Projector Side)
1
NC
__
2
RXD
IN
3
TXD
OUT
4
NC
__
5
GND
Signal Ground
6
NC
__
7
RTS
__
8
CTS
__
9
NC
__
Downloaded from ProjectorsManual.com
Manuals
52
English
Appendices
RS232 Protocol Function List
HD33
Optoma Data and HT Projectors
Baud Rate
Data Bits
Parity
Optoma Data and HT Projectors
Stop Bits
Baud Rate
Flow
Data
Bits Control
Parity
UART16550
Stop
Bits
Flow Control
FIFO
Projector Return (Pass): P
Projector
Return
Projector
Return (Pass):
P (Fail): F
UART16550 FIFO
9600
8
None
1
None
Disable
Projector Return (Fail): F
~
Lead Code
~
Note: There is a <CR> after all ASCII commands, 0D is the HEX code for <CR> in ASCII code
9600
8
None
HD33
1
Note: There is a <CR> after all ASCII commands, 0D is the HEX code for <CR> in ASCII code
None
Disable
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ
XX=01ˀ99,
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ
XX=01ˀ99, projector's ID, XX=00 is for all projectors
XX
X
Projector ID
Lead Code
Power
Direct Source Commands
Re-sync
Direct Source Commands
Display Mode
Contrast
Brightness
Color
Tint
Sharpness
On/Off
HDMI 1
VGA 1
VGA 1 Component
Video
Component RCA
HDMI 2
Cinema
Bright
Photo
Reference
User
ISF Day
ISF Night
3D
Noise Reduction
Display
Mode
Film
HDMI 1
VGA 1
VGA 1 Component
Video
Component RCA
HDMI 2
Cinema
Bright
Photo
Reference
User
Curve Type
ISF Day
Offset
Reset
ISF Night
3D
Curve Type
Graphics
Standard
PureMotion
IMAGE
PureDetail
PureEngine
PureColor
PureEngine Demo
RGB Gain/Bias
Color Settings / RGB Gain/Bias
Color Temperature
IMAGE
Offset
Reset
Curve Type
Offset
Reset
Curve Type
Offset
Noise Reduction
Reset
OFF
LOW
MED
HIGH
120Hz
OFF
1
2
3
OFF
1
2
3
Gamma
4
5
OFF
H Split
V Split
Red Gain
Green Gain
Blue Gain
Red Bias
Green Bias
Blue Bias
Reset
Warm
Medium
Cold
Auto
RGB (0-255)*
Color Space
Advanced
DISPLAY
Edge Mask
Zoom
V Image Shift (16:9)
V Keystone
4:3
16:9
LBX
Native
Auto235
SuperWide
3D Mode
3D
SuperWide
3D->2D
3D Format
3D Sync. Invert
Off
On (16:9)
On (2.35:1)
Auto
n
RGB(16 - 235)*
n=1
On/Offn=5
n=8
n=10
n=14
n=15
n=1
n=2
n=3
n=4
n=5
n=7
n=8
n=9
n= -50 - +50
n= -50 - +50
n= -50 - +50
n= -50 - +50
n= 0 - +15
n= 0 - 10
n=1
n=-7 - +7
n=-5 - +5
n=1
n=2
n=-7 - +7
n=-5 - +5
n=1
n=3
n=-7 - +7
n=-5 - +5
n=1
n=4
n=-7 - +7
n=-5 - +5
n=1
Film n=0
n=1
n=2
n=3
n=4
n=0
n=1
Videon=2
n=3
n=0
n=1
n=2
n=3
Graphics
n=4
n=5
n=0
n=1
n=2
n= -50 - +50
n= -50 - +50
Standard
n= -50 - +50
n= -50 - +50
n= -50 - +50
n= -50 - +50
n=1
n=1
PureMotion
n=2
n=3
n=1
* RGB (0-255) supports when
n=2
HDMI is detected
*RGB(16 - 235)supports when
HDMI is detected
YUV
Format
X
n=1/n=0 & 2
Function
Video
Contrast
Gamma
Brightness
Color
Tint
Sharpness
Advanced
X
X
Command ID
Projector ID
Function
Power
Re-sync
projector's ID, XX=00 is for all projectors
X
X
PureEngine
DLP Link/VESA 3D
ASCII
~XX00 n
~XX01 n
~XX12 n
Pass
P
P
P
Fail
F
F
~XX20 n
P
F
~XX22 n
~XX21 n
~XX45 n
~XX44 n
~XX23 n
~XX196 n
~XX35 n
~XX182 n
~XX183 n
~XX206 n
~XX35 n
~XX184 n
~XX185 n
~XX207 n
~XX35 n
~XX186 n
~XX187 n
~XX208 n
~XX35 n
~XX188 n
~XX189 n
~XX209 n
~XX190 n
~XX190 n
~XX190 n
~XX190 n
~XX190 n
~XX41 n
~XX41 n
~XX41 n
~XX41 n
~XX42 n
~XX42 n
~XX42 n
~XX42 n
~XX42 n
~XX42 n
~XX197 n
~XX197 n
~XX197 n
~XX24 n
~XX25 n
~XX26 n
~XX27 n
~XX28 n
~XX29 n
~XX33 n
~XX210 n
~XX210 n
~XX210 n
~XX37 n
P
P
P
P
P
P
P
F
F
F
F
F
F
F
n=3
n=2
n=5
n=6
n=8
n=9
PureColor
n=0-5
n=0-10
n= -50 - +50
n= -30 - +30
n=1/n=2
3D / L / R
2D->2D; 3D->3D / 3D->L /3D->R n=1/n=2/n=3
Decoding HDMI1.3
Off/SBS/Top and
n=0/n=1/
Bottom/Frame Sequential 3D timing
n=3/n-4
On/Off
n=0/n=1
n=0
PureEnginen=1
Demo
n=2
n=3
RGB Gain/Bias
Color Settings
/ RGB Gain/Bias
Downloaded from ProjectorsManual.com
Manuals
variable
n=4
PureDetail
n=1
53
Color Temperature
CR
space
~XX60 n
~XX61 n
~XX62 n
~XX64 n
~XX66 n
~XX230 n
~XX400 n
~XX405 n
~XX231 n
~XX199 n
carriage return
Command ID
Curve Type
Offset
Reset
Curve Type
Offset
Reset
Curve Type
Offset
Reset
Curve Type
Offset
Reset
OFF
LOW
P
MED
HIGH
120Hz
OFF
P
1
2
3
OFF
P
P
1
P
P 2
P
3
P
4
5
P
OFF
H Split
V Split
Red Gain
Green Gain
Blue Gain
Red Bias
Green Bias
Blue Bias
Reset
Warm
Medium
Cold
Auto
F
F
F
F
F
F
F
F
F
English
X
Appendices
~
X
Lead Code
X
Projector ID
Menu Location
Lamp Setting
Top Left
Top Right
Centre
Bottom Left
Bottom Right
Lamp Hour
Lamp Reminder
Lamp Mode
Lamp Reset
SYSTEM
Projection
Test Pattern
Front-Desktop
Rear-Desktop
Front-Ceiling
Rear-Ceiling
Blue
Black
Grey
Background Color
12v Trigger
Language
SETUP
Input Source
Source Lock
High Altitude
Information Hide
Auto Power Off (min)
Signal
English
German
French
Italian
Spanish
Portuguese
Polish
Dutch
Swedish
Norwegian/Danish
Finnish
Greek
Traditional Chinese
Simplified Chinese
Japanese
Korean
Russian
Hungarian
Czech
Arabic
Thai
Turkish
HDMI 1
HDMI 2
VGA
3 x RCA Comnponent
Video
Automatic
Frequency\Tracking
Phase
H. Position
V. Position
White level
Black level
Saturation
Hue
IRE
X
Lamp hour
On/Off
Bright/STD/ Image AI
Yes
No
Off / Grid / White
Off\On
On/Off
On/Off
On/Off
Enable/Disable
0 IRE / 7.5 IRE
Yes
No
Reset
Projector ID
Reset System Alert
Information from Projector Automatically
when:
Standby Mode
Warming up
Cooling Down
Out of Range
Lamp Fail
Thermal Switch Error
Fan Lock
Over Temperature
Lamp Hours Running Out
READ/Return Information from projector
Information
X
Command ID
X
n=1
n=2
n=3
n=4
n=5
n=1/ n=2
n=1/n=0 & 2
n=1/n=2/n=3
n=1
n=2
n=1
n=2
n=3
n=4
n=0/n=1/n=2
n=1
n=2
n=6
n=0/n=1
n=1
n=2
n=3
n=4
n=5
n=6
n=7
n=8
n=9
n=10
n=11
n=12
n=13
n=14
n=15
n=16
n=17
n=18
n=19
n=20
n=21
n=22
n=1
n=7
n=5
n=8
n=10
n=1/n=0 & 2
n=1/n=0 & 2
n=1/n=0 & 2
n=0-180
n=1/n=0
n=0~ 100
n= -50 - +50
n= -50 - +50
n= -50 - +50
n=-50-+50
n=-50-+50
n=-50-+50
n=-50-+50
n=1/n=0
n=1
n=2
n = 00 - 99
n=1
n
CR
space
~XX72 n
variable
P
carriage return
F
~XX108 n
~XX109 n
~XX110 n
~XX111 n
nnnn
P
P
P
F
F
F
F
~XX71 n
P
F
~XX195 n
~XX104 n
P
F
~XX70 n
P
F
~XX39 n
P
F
~XX100 n
~XX101 n
~XX102 n
~XX106 n
~XX91 n
~XX73 n
~XX74 n
~XX75 n
~XX76 n
~XX200 n
~XX201 n
~XX202 n
~XX203 n
~XX204 n
P
P
P
P
F
F
F
F
P
P
P
P
F
F
F
F
~XX112 n
P
F
~XX79 n
~XX99 n
P
P
F
F
~XX192 n
a=0
a=1
a=2
a=3
a=4
a=5
a=6
a=7
a=8
a = Power State
b = Lamp Hour
c = Input Source Commands
d = Firmware Version
e = Display mode
Model Name
RS232 Version No
Input Source Commands
Software Version
None
Cinema
Bright
Movie
sRGB
User(1)
User2
ISF Day
ISF Nigh
3D
n=1
a=0/1
bbbb
c=00
c=02
c=05
c=07
c=08
c=11
dddd
e=0
e=1
e=2
e=3
e=4
e=5
e=6
e=7
e=8
e=9
Depends
a=0/1/2
Depends
n=1
a=??
Off\On
None
VGA
Video
HDMI1
HDMI2
Component
None/VGAVideo/HDMI1/HD
MI2/Component
Display Mode
Power State
Brightness
n=1
n=1
INFOa
INFOa
INFOa
INFOa
~XX150 n
Okabbbbccdddde
~XX151 n
Oka
~XX152 n
Oka
~XX121 n
~XX122 n
Okdddd
n=1
Cinema/Bright/Photos/Refer
ence/User/ ISF Day/ISF
Night/3D
On/Off
Downloaded from ProjectorsManual.com
Manuals
54
English
n=1
n=1
Oka
Oka
~XX123 n
~XX124 n
~XX125 n
Oka
Oka
a=1 HD83 a=2 HD33
a=0/2//5//7/8/11
a=1/2/3/4/5/7/8/9
Cinema=1
Bright=2
Photo=3
Reference=4
User=5
ISFDay=7
ISFNight=8
3D=9
a=1/0
Appendices
~
Lead Code
X
X
X
Projector ID
Contrast
Format
Color Temperature
Projection Mode
X
Command ID
X
n
space
~XX126 n
n=1
4:3/16:9/LBX/Native/Auto23
5/SuperWide
n=1
Warm/Medium/Cold
n=1
Front-Desktop RearDesktop Front-Ceiling
Rear-Ceiling
n=1
~XX127 n
~XX128 n
~XX129 n
variable
Oka
CR
carriage return
Oka
a=1/2/5/6/8/9 for
4:3/16:9/LBX/Native/A
uto235/SuperWide
Oka
a=0/1/2
Warm/Medium/Cold
Oka
a=0/1/2/3 for FrontDesktop/Rear-Desktop
/Front-Ceiling/RearCeiling
RS232 Commands for HD33 Remote
Remote Control
Up/Page +
Left/Source
Enter (for projection MENU)
Right/Re-SYNC
Down/Page Menu
Re-sync
Downloaded from ProjectorsManual.com Manuals
n=10
n=11
n=12
n=13
n=14
n=20
n=41
~XX140 n
55
English
Appendices
Ceiling Mount Installation
1. To prevent damage to your projector, please use the Optoma ceiling mount.
2. If you wish to use a third party ceiling mount kit, please ensure the
screws used to attached a mount to the projector met the following specifications:
`` Screw type: M4*3
`` Maximum screw length: 10mm
`` Minimum screw length: 7.5mm
NOTE
™™ Please note that
damage resulting
from incorrect
installation will
invalidate the
warranty.
Warning:
1. If you buy a ceiling mount from another company, please
be sure to use the correct screw size. Screw size will vary
depending on the thickness of the mounting plate.
2. Be sure to keep at least 10cm gap between the ceiling and
the bottom of the projector.
3. Avoid installing the projector near a heat source.
46.89
105.53
83.65
197.75
29.93
197.88
126.56
Downloaded from ProjectorsManual.com
Manuals
56
English
19.57
71.19
378.69
312.80
167.95
62.43
Appendices
Optoma Global Offices
For service or support please contact your local office.
USA
3178 Laurelview Ct.
Fremont, CA 94538, USA
www.optomausa.com
Canada
2420 Meadowpine Blvd., Suite #105
Mississauga, ON, L5N 6S2, Canada
www.optoma.ca
Latin America
3178 Laurelview Ct.
Fremont, CA 94538, USA
www.optomausa.com
Europe
42 Caxton Way, The Watford Business Park Watford, Hertfordshire,
WD18 8QZ, UK
www.optoma.eu
Service Tel: +44 (0)1923 691865
Benelux BV
Randstad 22-123
1316 BW Almere
The Netherlands
www.optoma.nl
France
Bâtiment E
81-83 avenue Edouard Vaillant
92100 Boulogne Billancourt, France
Spain
C/ José Hierro,36 Of. 1C 28522
Rivas VaciaMadrid,
Spain
Downloaded from ProjectorsManual.com Manuals
888-289-6786
510-897-8601
[email protected]
888-289-6786
510-897-8601
[email protected]
888-289-6786
510-897-8601
[email protected]
+44 (0) 1923 691 800
+44 (0) 1923 691 888
[email protected]
+31 (0) 36 820 0253
+31 (0) 36 548 9052
+33 1 41 46 12 20
+33 1 41 46 94 35
[email protected]
+34 91 499 06 06
+34 91 670 08 32
57
English
Appendices
Deutschland
Wiesenstrasse 21 W
D40549 Düsseldorf,
Germany
Scandinavia
Lerpeveien 25
3040 Drammen
Norway
+49 (0) 211 506 6670
+49 (0) 211 506 66799
[email protected]
+47 32 98 89 90
+47 32 98 89 99
[email protected]
PO.BOX 9515
3038 Drammen
Norway
Korea
WOOMI TECH.CO.,LTD.
4F, Minu Bldg. 33-14, Kangnam-Ku,
seoul,135-815, KOREA
Japan
東京都足立区綾瀬3-25-18
株式会社オーエスエム
サポートセンター: 0120-46-5040
Taiwan
5F., No. 108, Minchiuan Rd.
Shindian City,
Taipei Taiwan 231, R.O.C.
www.optoma.com.tw
Hong Kong
Unit A, 27/F Dragon Centre,
79 Wing Hong Street,
Cheung Sha Wan,
Kowloon, Hong Kong
China
5F, No. 1205, Kaixuan Rd.,
Changning District
Shanghai, 200052, China
Downloaded from ProjectorsManual.com
Manuals
58
English
+82+2+34430004
+82+2+34430005
[email protected]
www.os-worldwide.com
+886-2-2218-2360
+886-2-2218-2313
[email protected]
asia.optoma.com
+852-2396-8968
+852-2370-1222
www.optoma.com.hk
+86-21-62947376
+86-21-62947375
www.optoma.com.cn
Appendices
Regulation & Safety Notices
This appendix lists the general notices of your projector.
FCC Notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This device generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
™™ Reorient or relocate the receiving antenna.
™™ Increase the separation between the device and receiver.
™™ Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
™™ Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded
cables to maintain compliance with FCC regulations.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user’s authority, which is granted by the Federal Communications
Commission, to operate this projector.
Operation Conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Remarque à l’intention des utilisateurs canadiens
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du
Canada.
Downloaded from ProjectorsManual.com Manuals
59
English
Appendices
Declaration of Conformity for EU countries
yy
yy
yy
EMC Directive 2004/108/EC (including amendments)
Low Voltage Directive 2006/95/EC
R & TTE Directive 1999/5/EC (if product has RF function)
Disposal instructions
Do not throw this electronic device into the trash when
discarding. To minimize pollution and ensure utmost
protection of the global environment, please recycle it.
Downloaded from ProjectorsManual.com
Manuals
60
English
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement