advertisement
User Manual
CL80
This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.
Ä
Click a topic
Common questions
Quick reference
Contents
Basic functions
Extended functions
Shooting options
Playback/Editing
Wireless network/Bluetooth
Appendixes
Index
Health and safety information
Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.
Warning
—situations that could cause injury to yourself or others
Caution
—situations that could cause damage to your camera or other equipment
Note
—notes, usage tips, or additional information
Safety warnings
Do not use your camera near flammable or explosive gases and liquids
Do not use your camera near fuels, combustibles, or flammable chemicals. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the camera or its accessories.
Keep your camera away from small children and pets
Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well.
Prevent damage to subjects’ eyesight
Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals. Using the flash too close to your subject’s eyes can cause temporary or permanent damage.
Handle and dispose of batteries and chargers with care
t
Use only Samsung-approved batteries and chargers.
Incompatible batteries and chargers can cause serious injuries or damage to your camera.
t Never dispose of batteries in a fire. Follow all local regulations when disposing of used batteries.
t
Never place batteries or cameras on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.
t Do not use a damaged power supply cord, plug, or loose outlet when charging batteries. This may cause a fire or electric shock.
Avoid interference with pacemakers
Maintain a minimum of 15 cm (6 inches) between cameras and pacemakers to avoid potential interference, as recommended by manufacturers and the independent research group, Wireless
Technology Research. If you have any reason to suspect that your camera is interfering with a pacemaker or other medical device, turn off the camera immediately and contact the manufacturer of the pacemaker or medical device for guidance.
1
Health and safety information
Safety precautions
Handle and store your camera carefully and sensibly
t
Do not allow your camera to get wet—liquids can cause serious damage. Do not handle your camera with wet hands. Water damage to your camera can void your manufacturer’s warranty.
t Do not expose the camera to direct sunlight or high temperatures for an extended period of time. Prolonged exposure to sunlight or extreme temperatures can cause permanent damage to your camera’s internal components.
t Avoid using or storing your camera in dusty, dirty, humid, or poorly-ventilated areas to prevent damage to moving parts and internal components.
t Remove the batteries from your camera when storing it for an extended period of time. Installed batteries may leak or corrode over time and cause serious damage to your camera.
t
Protect your camera from sand and dirt when using it on beaches or in other similar areas.
t Protect your camera and monitor from impact, rough handling, and excessive vibration to avoid serious damage.
t Exercise caution when connecting cables or adapters and installing batteries and memory cards. Forcing the connectors, improperly connecting cables, or improperly installing batteries and memory cards can damage ports, connectors, and accessories. t
Do not insert foreign objects into any of your camera’s compartments, slots, or access points. Damage due to improper use may not be covered by your warranty.
t Do not swing your camera by the strap. This may cause injury to yourself or others.
t
Do not paint your camera, as paint can clog moving parts and prevent proper operation.
t Paint or metal on the outside of the camera may cause allergies, itchy skin, eczema, or swelling for people with sensitive skin. If you have experience any of these symptoms, stop using the camera immediately and consult a doctor.
Protect batteries, chargers, and memory cards from damage
t Avoid exposing batteries or memory cards to very cold or very hot temperatures (below 0º C/32º F or above 40º C/104º F).
Extreme temperatures can reduce the charging capacity of your batteries and can cause memory cards to malfunction.
t Prevent batteries from making contact with metal objects, as this can create a connection between the + and – terminals of your battery and lead to temporary or permanent battery damage. Also, this may cause a fire or electric shock.
t Prevent memory cards from making contact with liquids, dirt, or foreign substances. If dirty, wipe the memory card clean with a soft cloth before inserting in your camera.
t
Do not allow liquids, dirt, or foreign substances to come in contact with the memory card slot. Doing so may cause the camera to malfunction.
2
Health and safety information t
Turn off the camera when inserting or removing the memory card.
t Do not bend, drop, or subject memory cards to heavy impact or pressure.
t Do not use memory cards that have been formatted by other cameras or by a computer. Reformat the memory card with your camera.
t Never use a damaged charger, battery, or memory card.
Use only Samsung-approved accessories
Using incompatible accessories may damage your camera, cause injury, or void your warranty.
Protect your camera’s lens
t Do not expose the lens to direct sunlight, as this may discolor the image sensor or cause it to malfunction.
t
Protect your lens from fingerprints and scratches. Clean your lens with a soft, clean, debris-free lens cloth.
Follow all safety warnings and regulations
Comply with any regulations that restrict the use of a camera in a certain area.
Turn off the camera near medical equipment
Your camera can interfere with medical equipment in hospitals or health care facilities. Follow all regulations, posted warnings, and directions from medical personnel.
Turn off the camera when in an aircraft
Your camera can cause interference with aircraft equipment.
Follow all airline regulations and turn off your camera when directed by airline personnel.
Avoid interference with other electronic devices
Your camera emits radio frequency (RF) signals that may interfere with unshielded or improperly shielded electronic equipment, such as pacemakers, hearing aids, medical devices, and other electronic devices in homes or vehicles. Consult the manufacturers of your electronic devices to solve any interference problems you experience.
3
Health and safety information
Important usage information
Allow only qualified personnel to service your camera
Do not allow unqualified personnel to service the camera or attempt to service the camera yourself. Any damage that results from unqualified service is not covered by your warranty.
Ensure maximum battery and charger life
t
Overcharging batteries may shorten battery life. After charging is finished, disconnect the cable from your camera.
t Over time, unused batteries will discharge and must be recharged before use.
t
Disconnect chargers from power sources when not in use.
t
Use batteries only for their intended purpose.
Exercise caution when using the camera in humid environments
When transferring the camera from a cold environment to a warm and humid one, condensation can form on the delicate electronic circuitry and memory card. In this situation, wait for at least 1 hour until all moisture has evaporated before using the camera.
Check that the camera is operating properly before use
The manufacturer takes no responsibility for any loss of files or damage that may result from camera malfunction or improper use.
Use your camera in the normal position
Avoid contact with your camera’s internal antenna.
t
Data transferred via WLAN or Bluetooth technology could be leaked, so avoid transferring sensitive data in public areas or on open networks. t The camera manufacturer is not liable for any data transfers that infringe on copyrights, trademarks, intellectual property laws, or public decency ordnances.
4
Copyright information t
Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation.
t Mac is a registered trademark of the Apple Corporation.
t HDMI, the HDMI logo and the term
“High Definition Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing LLC.
t Bluetooth ® and the Bluetooth logo are registered trademarks of the Bluetooth SIG, Inc. and are used by Samsung Electronics
Co., Ltd. under license. All other trademarks and product names are owned by their respective owners.
t Wi-Fi ® , the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance.
t Camera specifications or contents of this manual may be changed without prior notice due to upgrade of camera functions.
t We recommend using your camera within a country where you purchase it.
t For Open Source License information, refer to the
“OpenSourceInfo.pdf” in the provided CD-ROM.
Organization of the user manual
Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.
Extended functions
Learn how to take a photo by selecting a mode and how to record a video or voice memo.
Shooting options
Learn about the options you can set in Shooting mode.
Playback/Editing
Wireless network/Bluetooth
Learn to use several functions using wireless local area networks (WLANs) and the Bluetooth feature.
Appendixes
Refer to settings, error messages, specifications, and maintenance tips.
5
Indications used in this manual
Shooting mode
Smart Auto
Auto
Program
Scene
DUAL IS
Smart Scene Detection
Movie
Indication
S a p s d
D v
Shooting mode icons
These icons indicate that a function is available in the corresponding modes. The s
mode may not support functions for all scenes.
e.g.)
Available in the
Program, DUAL IS,
Movie, and Smart
Scene Detection modes
Icons used in this manual
Icon Function
Additional information
[ ]
( )
*
Safety warnings and precautions
Camera buttons; for example: [
Shutter
]
(represents the shutter button)
Page number of related information
The order of options or menus you must select to perform a step; for example: Select
>
(represents Select
>
, and then )
Annotation
Abbreviations used in this manual
Abbreviation
ACB
AEB
AF
AP
DIS
DLNA
DPOF
EV
OIS
WB
Definition
Auto Contrast Balance
Auto Exposure Bracket
Auto Focus
Access Point
Digital Image Stabilization
Digital Living Network Alliance
Digital Print Order Format
Exposure Value
Optical Image Stabilization
White Balance
6
Expressions used in this manual
Pressing the shutter
t Half-press [
Shutter
]: press the shutter halfway down t Press [
Shutter
]: press the shutter all the way down
Exposure (Brightness)
The amount of light that enters your camera determines the exposure. You can alter the exposure with shutter speed, aperture value, and ISO speed. By altering the exposure, your photos will be darker or lighter.
Half-press [
Shutter
] Press [
Shutter
]
Subject, background, and composition
t
Subject
: the main object of a scene, such as a person, animal, or still life t
Background
: the objects around the subject t
Composition
: the combination of a subject and background
Background
Composition
Subject
Normal exposure
7
Overexposure (too bright)
Common questions
You can get answers to common questions. Solve problems easily by setting shooting options.
The subject's eyes appear red.
This is caused by a reflection from the camera flash.
t
Set the flash option to
Red-eye
or
Red-eye Fix
t
If the photo has already been taken, select
Red-eye Fix
Photos have dust spots.
Dust particles floating in the air may be captured in photos when using the flash.
t
Turn off the flash or avoid taking photos in a dusty place.
t
Set ISO speed options. (p. 48)
Photos are blurred.
This may be caused by taking photos in low light conditions or holding the camera incorrectly. t Press [
Shutter
] halfway down to make sure the subject is focused. (p. 30)
t
Use the d
Photos are blurred when shooting at night.
Subjects come out too dark because of backlighting.
As the camera tries to let in more light, the shutter speed slows.
This can make it difficult to steady the camera and may result in camera shake.
t
Select
Night
in the s
t Turn on the flash. (p.
t
Set ISO speed options. (p. 48)
t Use a tripod to prevent your camera from shaking.
When the light source is behind the subject or when there is a high contrast between the light and dark areas, the subject may come out shaded.
t
Avoid shooting in front of the sun.
t t
Select
Backlight
in the s
Set the flash option to
Fill in
t Adjust the exposure. (p.
t Set the Auto Contrast Balance (
ACB
t Set the metering option to
Spot
if a bright subject is in the center of the frame. (p. 59)
8
Quick reference
t t t
Taking photos of people s
mode > Beauty Shot, Portrait, Children f
Red-eye f
, Red-eye Fix (to prevent or correct red-eye)
Face Detection f
Taking photos at night or in the dark t t t s
mode > Night, Dawn, Fireworks
Flash options f
f
ISO speed (to adjust the sensitivity to light) f
Taking action photos t Continuous , Motion Capture f
Adjusting the exposure (brightness) t t t t t
ISO speed (to adjust the sensitivity to light) f
EV (to adjust exposure) f
ACB (to compensate for subjects against bright backgrounds) f
Metering f
AEB (to take 3 photos of the same scene with different exposures) f
Applying a different effect t t t
Photo styles (to apply tones) f
Smart filter effects f
Image adjustment (to adjust saturation, sharpness, or contrast) f
t t t
Taking photos of text, insects, or flowers s
mode > Close Up, Text f
Macro , Auto Macro (to take close-up photos) f
White Balance (to change the color tone) f
Reducing camera shake t t
Optical Image Stabilization (OIS) f
d
mode f
t Viewing files by category in
Smart Album f
t t
Deleting all files on the memory card f
Viewing files as a slide show f
t Viewing files on a TV or HDTV f
t t
Connecting your camera to a computer f
Adjusting sound and volume f
t Adjusting the brightness of the display f
t t
Changing the display language f
Setting the date and time f
t t
Formatting the memory card f
Troubleshooting f
9
Contents
Basic functions
............................................................... 13
Unpacking ......................................................................... 14
Camera layout ................................................................... 15
Inserting the battery and memory card .............................. 17
Charging the battery and turning your camera on ............. 18
............................................................ 18
Turning on your camera ........................................................ 18
Performing the initial setup ................................................ 19
Learning icons ................................................................... 21
Using the touch screen ..................................................... 22
Selecting a shooting mode ................................................ 24
Selecting a shooting mode using motion recognition .............. 25
Setting the touch screen and sound ................................. 26
Setting the display type for the touch screen
Setting the sound ................................................................ 26
Taking photos .................................................................... 27
Zooming ............................................................................. 28
Reducing camera shake (OIS) .............................................. 29
Tips for getting a clearer photo .......................................... 30
Extended functions
........................................................ 32
Shooting modes ................................................................ 33
Using the Smart Auto mode ................................................. 33
Using the Scene mode ........................................................ 34
Using the Beauty Shot mode ................................................ 35
Using the frame guide .......................................................... 36
Adjusting the exposure in the Night mode .............................. 36
Using the DUAL IS mode ..................................................... 37
Using the Program mode ..................................................... 38
Recording a video ............................................................... 38
Using the Smart Scene Detection mode ................................ 40
Recording voice memos ................................................... 41
Recording a voice memo ..................................................... 41
Adding a voice memo to a photo
.......................................... 41
Shooting options
............................................................ 42
Selecting a resolution and quality ...................................... 43
........................................................... 43
Selecting image quality ........................................................ 44
Using the timer .................................................................. 45
10
Contents
Shooting in the dark .......................................................... 47
.............................................................. 47
Using the flash .................................................................... 47
...................................................... 48
Changing the camera’s focus ............................................ 49
Using macro ....................................................................... 49
................................................................. 49
Using smart touch focus ...................................................... 50
.................................................... 51
Adjusting the focus area ....................................................... 51
Using face detection ......................................................... 52
Detecting faces ................................................................... 52
Taking a self portrait shot ...................................................... 53
Taking a smile shot .............................................................. 53
Detecting eye blinking .......................................................... 54
Using smart face recognition ................................................ 54
Registering faces as your favorites (My Star) .......................... 55
Adjusting brightness and color .......................................... 57
Adjusting the exposure manually (EV) .................................... 57
Compensating for backlighting (ACB) .................................... 58
Changing the metering option ............................................... 59
Selecting a light source (White balance) ................................. 60
Using burst modes ............................................................ 62
Improving your photos ...................................................... 63
........................................................... 63
Applying smart filter effects ................................................... 64
.......................................................... 65
Playback/Editing
............................................................. 66
Playing back ...................................................................... 67
Starting Playback mode ....................................................... 67
Viewing photos ................................................................... 73
Playing a video .................................................................... 75
Playing a voice memo .......................................................... 76
Editing a photo .................................................................. 78
Rotating a photo .................................................................. 78
Resizing photos .................................................................. 78
Applying photo styles ........................................................... 79
Applying smart filter effects ................................................... 80
Applying a special effect ...................................................... 81
Correcting exposure problems ............................................. 81
Editing photos of portraits ..................................................... 82
Creating a print order (DPOF) ................................................ 82
Viewing files on a TV or HDTV ........................................... 84
11
Contents
Transferring files to your computer (for Windows) .............. 86
Transferring files using Intelli-studio
........................................ 87
Transferring files by connecting the camera as a removable disk
.................................................................................... 89
Disconnecting the camera (for Windows XP) .......................... 90
Transferring files to your computer (for Mac) ...................... 91
Printing photos with a photo printer (PictBridge) ............... 92
Wireless network/Bluetooth
.......................................... 94
Connecting to a WLAN and configuring network settings . 95
Connecting to a WLAN automatically .................................... 95
Connecting to a WLAN manually .......................................... 96
Network connection tips ...................................................... 97
Storing your information ....................................................... 98
Storing email addresses ....................................................... 98
Setting the file size to share .................................................. 99
Configuring the WPS setting ................................................. 99
Setting a password ............................................................. 99
Changing the password ..................................................... 100
Checking information ......................................................... 100
Entering text ...................................................................... 100
Using photo or video sharing websites ............................ 101
Accessing a website .......................................................... 101
................................................ 102
Sending photos via email ................................................ 103
Viewing photos or videos on the DLNA devices .............. 104
Viewing photos or videos on a TV screen
............................ 104
Viewing photos or videos on another device (renderer) ......... 105
Sending or receiving photos or videos with a camera ..... 107
Sending photos or videos to another camera ....................... 107
Receiving photos or videos from another camera ................. 107
Sending photos via Bluetooth ......................................... 109
Appendixes
................................................................... 111
Settings menu ................................................................. 112
.............................................. 112
Sound settings .................................................................. 113
................................................................. 113
Camera settings ................................................................ 114
Error messages ............................................................... 117
Camera maintenance ...................................................... 118
Cleaning your camera ........................................................ 118
About memory cards ......................................................... 119
About the battery ............................................................... 120
Before contacting a service center .................................. 123
Camera specifications ..................................................... 126
FCC notice ...................................................................... 130
Index ............................................................................... 131
12
Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.
Unpacking
Camera layout
Inserting the battery and memory card
Charging the battery and turning your camera on
Charging the battery ………………………… 18
Turning on your camera ……………………… 18
Performing the initial setup
Learning icons
Using the touch screen
Selecting a shooting mode
Selecting a shooting mode using motion recognition …………………………………… 25
Setting the touch screen and sound
Setting the display type for the touch screen 26
Setting the sound …………………………… 26
Taking photos
Reducing camera shake (OIS) ……………… 29
Tips for getting a clearer photo
Unpacking
Check your product box for the following items.
Camera AC adapter/USB cable
(AD44-00143A)/(AD39-00165A)
Rechargeable battery
(4302-001226)
Strap
(Sliver: AD63-02596A/
Black: AD63-02604A)
User Manual CD-ROM
(AD46-00309A)
The illustrations may differ from your actual items.
Quick Start Manual
(AD68-04779A)
Optional accessories
Cradle
(AD97-18838A)
Touch pen
(AD75-00070A)
Camera case Memory card
(microSD TM )
A/V cable
(AD39-00146A)
Basic functions
14
Battery charger
(AD44-00164A)
HDMI cable
(AD39-00179A)
Camera layout
Before you start, familiarize yourself with your camera's parts and their functions.
Shutter button
Flash
Lens
POWER button
Microphone
AF-assist light/timer lamp
Internal antenna*
* Avoid contact with the internal antenna while using the wireless network.
Tripod mount
Speaker
Battery chamber cover
Insert a memory card and battery
Basic functions
15
Camera layout
Playback button
Touch screen
Status lamp t
Blinking
: When saving a photo or video, being read by a computer or printer, out of focus, connecting to a WLAN, sending a photo, or turning on the Bluetooth feature t
Steady
: When connecting to a computer or in focus
Zoom button t
Zoom in or out t
Zoom in on part of a photo or view files as thumbnails
HDMI port
Accepts HDMI cable
USB and A/V port
Accepts USB cable or A/V cable
1
2
Basic functions
16
Inserting the battery and memory card
Learn to insert the battery and an optional microSD
TM
memory card into the camera.
Removing the battery and memory card
Memory card
Push gently until the card disengages from the camera and then pull it out of the slot.
Insert a memory card with the gold-colored contacts facing up.
Insert the battery with the
Samsung logo facing down.
Battery lock
Push the lock up to release the battery.
Battery
The internal memory can be used as a temporary storage device when the memory card is not inserted.
Basic functions
17
Charging the battery and turning your camera on
Charging the battery
Before using the camera for the first time, you must charge the battery. Attach the USB cable to the AC adapter and then plug the end of cable with the indicator light into your camera.
Turning on your camera
Press [
POWER
] to turn your camera on or off.
t
The initial setup screen appears when you turn on the camera for the first time. (p. 19)
Turning on your camera in Playback mode
Press [
Playback
]. The camera turns on and accesses Playback mode immediately.
Indicator light t
Red
: Charging t
Green
: Fully charged
Basic functions
18
When you turn on your camera by pressing and holding [
Playback
] for about
5 seconds, the camera does not emit any camera sounds.
Performing the initial setup
The initial setup screen appears to allow you to configure the camera's basic settings.
1
Select
Language
.
4
Select a time zone and select .
t To set the daylight-saving time, select .
2
3
Select a language.
Select
Time Zone
(Time Zone).
5
6
Select
Date & Time
(Date & Time).
Set the date and time, select a date format, and select
.
Basic functions
19
Performing the initial setup
7
8
Select
Calibration
(Calibration).
Tap the target on the screen with your touch pen.
Calibration
Tap directly in the center of the target for optimal performance.
9
Select to switch to the Shooting mode.
Basic functions
20
Learning icons
The icons displayed will change according to the mode you select or the options you set.
A. Status icons
Icon p
Description
Shooting mode
Aperture and shutter speed
Photo resolution
Video resolution
Metering
Optical Image Stabilization (OIS)
Frame rate
Exposure value
ISO speed
White balance
Face detection
Burst mode
Image adjustment (sharpness, contrast, saturation)
A
B
Icon Description
Photo styles
Smart filter effect
Available number of photos
Available recording time
Internal memory
Memory card inserted t t t
: Fully charged
: Partially charged
: Charging needed
Zoom ratio
Voice memo
Auto focus frame
Camera shake
Option set 1 (of 4)
Current date and time
Grid lines
B. Option icons (touch)
Icon Description
Flash option
Auto focus option
Timer option
Display type
Basic functions
21
Icon l f
Description t
: Motion recognition t
N
: Network and Bluetooth menus t
M
: Shooting options and settings menu
Image setting options t
: Exposure value t
: White balance t
: ISO speed t
: Face tone t
: Face retouch t
: Focus area option t
: Face detection option t
: Smart face recognition edit option t
: Photo resolution t
: Video resolution t
: Photo quality t
: Frame rate t
: Exposure with ACB t
: Metering option t
: Burst type t
: Photo styles t
: Smart filter effect t
: Image adjustment (sharpness, contrast, saturation) t
: Long time shutter t
: Optical Image Stabilization (OIS) t
: Audio recording t
<>
: Another row of options
Using the touch screen
Learn basic actions to use the touch screen. Use the supplied touch pen to touch or drag on the screen.
Do not use other sharp objects, such as pens or pencils, to touch the screen.
Doing so may damage the screen.
Touching
Touch an icon to select a menu or option.
t When you touch or drag on the screen, discolorations will occur. It is not a malfunction but a characteristic of the touch screen. Touch or drag lightly to reduce these annoying effects.
t The touch screen may not recognize your touches correctly when:
-
you touch multiple items at the same time you use the camera in high humidity environments
you use the camera with an LCD protection film or another LCD accessory t
If you touch the screen with your finger, the screen may not recognise your input.
t If you perform no operations for few seconds, the screen will dim to save battery life.
Dragging
Drag left or right to scroll horizontally.
EV
+1
Basic functions
22
Using the touch screen
Using gestures
Perform certain functions by drawing commands on the touch screen.
Gesture Description
Draw a horizontal bar to right or left to view the next or previous file.
Draw an X to delete a photo.
Draw a circle to rotate a photo.
Basic functions
23
Selecting a shooting mode
Learn how to select a shooting mode. Your camera provides you with various modes for shooting.
1
Select the mode icon.
2
Select a mode.
Mode
S a p s d
D v
Description
Smart Auto
: Take a photo by letting the camera select a scene mode as it detects. (p. 33)
Auto
: Take a photo quickly and easily with minimal settings. (p. 27)
Program
: Take a photo by setting options. (p. 38)
Scene
: Take a photo with options preset for a specific scene. (p. 34)
DUAL IS
: Take a photo with options suitable for reducing camera shake. (p. 37)
Smart Scene Detection
: Record a video by letting the camera select a scene mode as it detects. (p. 40)
Movie
: Record a video. (p. 38)
Basic functions
24
Selecting a shooting mode
Selecting a shooting mode using motion recognition
Your camera features a built-in motion sensor that allows you to quickly switch the shooting mode by tilting the camera.
In Shooting mode, tilt the camera while touching and holding .
Access the Movie mode (p. 38)
Access the Smart Auto mode (p. 33)
Motion recognition may not work well if you hold the camera parallel to the ground, as shown below.
Access the Program mode (p. 38)
Basic functions
25
Setting the touch screen and sound
Learn how to change the basic settings for the touch screen and sound according to your preferences.
Setting the display type for the touch screen
1
In Shooting mode, select .
(In Playback mode, select .)
2
Select an option.
Full
Setting the sound
Set whether your camera emits a specified sound when you operate your camera.
1
In Shooting or Playback mode, select
M
.
2
3
Select
Beep Sound
.
Select an option.
Option Description
Off
On
The camera does not emit any sounds.
The camera emits sounds.
4
Select to return to the previous mode.
Option Description
Full
: Display the name of an option when you select an icon.
Basic
: Display icons without the name of an option.
This option is available only in Playback mode.
Hide
: Hide icons on the screen if you perform no operations for 3 seconds (touch the screen to display icons again).
Guide Line
: Display grid lines. The grid lines are helpful for getting the photo aligned with a surface, such as the horizon or the edges of buildings. This option is available only in Shooting mode.
Basic functions
26
Taking photos
Learn basic actions to take photos easily and quickly in the Auto mode.
1
Make sure that the camera is in the a
mode (Auto), the camera’s default shooting mode. t If not, select the mode icon a
.
3
Half-press [
Shutter
] to focus.
t A green frame means the subject in focus.
2
Align your subject in the frame.
4
Press [
Shutter
] to take a photo.
See page 30 for tips to get clearer photos.
Basic functions
27
Taking photos
Zooming
You can shoot close-up photos by adjusting the zoom. Your camera has a 7X optical zoom and 5X digital zoom. By using both, you can zoom in up to 35 times.
Rotate [
Zoom
] right to zoom in on your subject. Rotate [
Zoom
] left to zoom out.
Zoom ratio
Digital zoom
If the zoom indicator is in the digital range, your camera is using the digital zoom. The picture quality may deteriorate when you use the digital zoom.
Zoom indicator
Digital range
Optical range
Zoom out
The zoom ratio available for videos differs.
Zoom in t The digital zoom is not available when using
S
, d
, s
(in some scenes), v
, and
D
modes and when used with
Face Detection
, and
Smart Filter
.
t It may take longer to save a photo when using the digital zoom.
Basic functions
28
Taking photos
Reducing camera shake (OIS)
a p s v D
Reduce camera shake optically in Shooting mode.
Before correction After correction
1
In Shooting mode, select f
>
(once or twice) .
2
Select an option.
Option Description
Off
: Deactivate the OIS function.
On
: Activate the OIS function.
t OIS may not function properly when:
-
-
-
you move your camera to follow a moving subject you use digital zoom there is too much camera shake the shutter speed is slow (e.g., when you select
Night
in the s mode)
-
the battery is low you take a close-up shot t
If you use the OIS function with a tripod, your images may be blurred by the vibration of the OIS sensor. Deactivate the OIS function when you use a tripod.
t If the camera is impacted, the display will be blurry. In this case, turn off the camera and turn it on again to use the OIS function correctly.
t In some scene modes, the OIS function is unavailable.
Basic functions
29
Tips for getting a clearer photo
Holding your camera correctly
Make sure nothing is blocking the lens.
Reducing camera shake
t Set the Optical Image Stabilization option to reduce camera shake optically. (p. 29) t Select the d
mode to reduce camera shake both optically and digitally. (p. 37)
When
h
is displayed
Half-pressing the shutter button
Half-press [
Shutter
] and adjust the focus. Focus and exposure will be adjusted automatically.
Camera shake
The aperture value and shutter speed are automatically set.
Focus frame t Press [
Shutter
] to take the photo if displayed in green.
t
Change the frame and half-press [
Shutter
] again if displayed in red.
Basic functions
30
When shooting in the dark, avoid setting the flash option to
Slow
Sync
or
Off
. The aperture remains open longer and it may be harder to hold the camera still.
t t
Use a tripod or set the flash option to
Fill in
. (p. 47)
Set ISO speed options. (p. 48)
Preventing your subject from being out of focus
It may be difficult to get your subject in focus when:
there is little contrast between the subject and background
(When your subject is wearing a color of clothing that is similar to the background)
the light source behind the subject is too bright
the subject is shiny
the subject includes horizontal patterns, such as blinds
the subject is not positioned in the center of the frame t When you take photos in low light
Turn on the flash.
(p. 47) t
When subjects are moving fast
Use the continuous or motion capture function. (p. 62)
Use the focus lock
Half-press [
Shutter
] to focus. When the subject is in focus, you can reposition the frame to change the composition.
When you are ready, press [
Shutter
] to take your photo.
Basic functions
31
Extended functions
Learn how to take a photo by selecting a mode and how to record a video or voice memo.
Shooting modes
Using the Smart Auto mode …………………………… 33
Using the Scene mode ………………………………… 34
Using the Beauty Shot mode …………………………… 35
Using the frame guide ………………………………… 36
Adjusting the exposure in the Night mode ……………… 36
Using the DUAL IS mode ……………………………… 37
Using the Program mode ……………………………… 38
Recording a video ……………………………………… 38
Using the Smart Scene Detection mode ……………… 40
Recording voice memos
Recording a voice memo ……………………………… 41
Adding a voice memo to a photo ……………………… 41
Shooting modes
Take photos or record videos by selecting the best shooting mode for the conditions.
Using the Smart Auto mode
In this mode, your camera automatically chooses the appropriate camera settings based on a detected type of scene. It will be helpful if you are not familiar with the camera settings for various scenes.
1
2
In Shooting mode, select a
S
.
Align your subject in the frame.
t
The camera selects a scene automatically. An appropriate mode icon will appear at the top left of the screen.
Icon
Icon Description
Appears when taking photos of landscapes.
Appears when taking photos of bright white backgrounds.
Appears when taking photos of landscapes at night.
This is available only when the flash is off.
Description
Appears when taking portraits at night.
Appears when taking photos of landscapes with backlighting.
Appears when taking portraits with backlighting.
Appears when taking portraits.
Appears when taking close-up photos of objects.
Appears when taking close-up photos of text.
Appears when taking photos of sunsets.
Appears when taking photos of clear skies.
Appears when taking photos of forested areas.
Appears when taking close-up photos of colorful subjects.
Appears when taking close-up portraits of people.
Appears when the camera and subject are stable for a while. This is available only when you are shooting in the dark.
Appears when taking photos of actively moving subjects.
Appears when taking photos of fireworks. This is available only when you use a tripod.
Extended functions
33
Shooting modes
3
4
Half-press [
Shutter
] to focus.
Press [
Shutter
] to take the photo. t
If the camera does not recognize a proper scene mode,
S
will not change and the default settings will be used.
t Even if there is a face detected, the camera may not select a portrait mode depending on the subject's position or lighting.
t
The camera may not select the correct scene depending on shooting environments, such as camera shake, lighting and distance to the subject.
t Even if you use a tripod, the on the subject's movement.
mode may not be detected depending
Using the Scene mode
Take a photo with options preset for a specific scene.
1
2
In Shooting mode, select a
s
.
Select a scene.
This mode allows you to choose an appropriate scene for a variety of situations.
Scene t For the Beauty Shot mode, see “Using the Beauty Shot mode” on page 35.
t For the Frame Guide mode, see “Using the frame guide” on page 36.
t For the Night mode, see “Adjusting the exposure in the Night mode” on page 36.
3
Align your subject in the frame and half-press [
Shutter
] to focus.
4
Press [
Shutter
] to take the photo.
Extended functions
34
Shooting modes
Using the Beauty Shot mode
Take a photo of a person with options to hide facial imperfections.
1
2
In Shooting mode, select a
s
.
To make the subject's skin tone appear lighter (face only), select f
an option.
t
Select a higher setting to make skin tone appear lighter.
3
To hide facial imperfections, select f
an option.
t Select a higher setting to hide a greater number of imperfections.
Level 3
Level 2
4
Align your subject in the frame and half-press [
Shutter
] to focus.
5
Press [
Shutter
] to take the photo.
The focus distance will be set to
Auto Macro
.
Extended functions
35
Shooting modes
Using the frame guide
When you want another person to take a photo of you, you can compose the scene with the frame guide feature. The frame guide will help the other person take a photo of you by showing the part of the pre-composed scene.
1
In Shooting mode, select a
s
.
2
Align your subject in the frame and press [
Shutter
].
t Transparent guides will appear on the left and right of the frame.
Cancel Frame: Back
Adjusting the exposure in the Night mode
In the Night mode, you can catch brief flashes of light as curved streaks by extending the exposure. Use a slow shutter speed to extend the time until the shutter closes. Increase the aperture value to prevent overexposure.
1
In Shooting mode, select a
s
.
2
Select f
Aperture
.
Aperture Shutter
Speed
3
Ask another person to take a photo.
t The person must align the subject in the frame by using the guides, and then press [
Shutter
] to take the photo.
4
To cancel the guides, select .
3
Select an option.
Extended functions
36
Shooting modes
4
Select f
Shutter Speed
.
Using the DUAL IS mode
Reduce camera shake and prevent blurred photos with Optical and Digital Image Stabilization functions.
Aperture Shutter
Speed
1.0
2.0
4.0
8.0 16.0
5
6
Select a value to adjust the shutter speed and select
Align your subject in the frame and half-press [
Shutter
] to focus.
.
7
Press [
Shutter
] to take the photo.
Use a tripod to prevent your photos from blurring.
Before correction After correction
1
2
In Shooting mode, select a
d
.
Align your subject in the frame and half-press [
Shutter
] to focus.
3
Press [
Shutter
] to take the photo.
t
The digital zoom will not work in this mode.
t The camera will correct photos optically only when you take them with a light source that is brighter than fluorescent light.
t
If your subject is moving rapidly, the photo may be blurry.
t
Set the Optical Image Stabilization option to reduce camera shake in different shooting modes. (p. 29)
Extended functions
37
Shooting modes
Using the Program mode
Set various options (except for shutter speed and aperture value) in the Program mode.
1
2
In Shooting mode, select a
p
.
Set options. (For a list of options, refer to “ Shooting options.”)
Recording a video
Record videos of up to 20 minutes in length in high definition. The recorded video is saved as an H.264 (MPEG-4.AVC) file. t
H.264 (MPEG-4 part10/AVC) is a high-compression video format established by international standard organizations ISO/IEC and ITU-T.
t When the Optical Image Stabilization ( ) is activated, your video may be recorded with the OIS operation sound.
t
The zoom sound may be recorded if you use the zoom while recording a video.
1
In Shooting mode, select a
v
.
2
Select f
a frame rate (the number of frames per second).
t As the number of frames increases, action appears more natural, but the file size is increased.
3
Align your subject in the frame and half-press [
Shutter
] to focus.
4
Press [
Shutter
] to take the photo.
30 FPS
Extended functions
38
is available only when the video resolution is 320 X 240.
Shooting modes
3
Select
>
a sound option.
Option Description
Off
: Record a video without sound.
On
: Record a video with sound.
Zoom Mute
: Record a video without sound while zooming.
4
Set other options as desired. (For options, refer to
“Shooting options.”)
5
6
Press [
Shutter
] to start recording.
Press [
Shutter
] again to stop recording.
To pause recording
The camera allows you to pause temporarily while recording a video. With this function, you can record your favorite scenes as a single video.
Select to pause while recording. Select to resume.
Stop: Shutter
Extended functions
39
Shooting modes
Using the Smart Scene Detection mode
In this mode, your camera automatically chooses the appropriate camera settings based on a detected type of scene.
1
2
In Shooting mode, select a
D
.
Align your subject in the frame.
t
The camera selects a scene automatically. An appropriate mode icon will appear at the top left of the screen.
3
4
Press [
Shutter
] to start recording.
Press [
Shutter
] again to stop recording. t
If the camera does not recognize a proper scene mode,
D
will not change and the default settings will be used.
t The camera may not select the correct scene depending on shooting environments, such as camera shake, lighting and distance to the subject.
Icon Description
Appears when recording videos of landscapes.
Appears when recording videos of clear skies.
Appears when recording videos of forested areas.
Appears when recording videos of sunsets.
Extended functions
40
Recording voice memos
a p s d
Learn how to record a voice memo that you can play back at any time. You can add a voice memo to a photo as a short reminder of shooting conditions.
You will get the best sound quality when recording 40 cm away from the camera.
Recording a voice memo
1
In Shooting mode, select f
. (In some modes, select f
>
(repeatedly)
.)
Adding a voice memo to a photo
1
In Shooting mode, select f
. (In some modes, select f
>
(repeatedly)
.)
Record
Memo
2
Press [
Shutter
] to record.
t t
Select to pause and to resume.
The available recording time will be displayed on the top of the screen.
t You can record voice memos of up to 10 hours in length.
3
4
Press [
Shutter
] to stop.
Select to switch to Shooting mode.
2
3
Align your subject in the frame and take a photo.
t You will begin recording a voice memo right after taking the photo.
Record a short voice memo (10 seconds maximum).
t Press [
Shutter
] to stop recording a voice memo.
Extended functions
41
Shooting options
Learn about the options you can set in Shooting mode.
Selecting a resolution and quality
Selecting a resolution ………………………… 43
Selecting image quality ……………………… 44
Using the timer
Shooting in the dark
Preventing red-eye …………………………… 47
Using the flash ……………………………… 47
Adjusting the ISO speed …………………… 48
Changing the camera’s focus
Using auto focus …………………………… 49
Using smart touch focus …………………… 50
Using one touch shooting …………………… 51
Adjusting the focus area ……………………… 51
Using face detection
Detecting faces ……………………………… 52
Taking a self portrait shot …………………… 53
Taking a smile shot …………………………… 53
Detecting eye blinking ……………………… 54
Using smart face recognition ………………… 54
Registering faces as your favorites (My Star) … 55
Adjusting brightness and color
Adjusting the exposure manually (EV) ……… 57
Compensating for backlighting (ACB) ……… 58
Changing the metering option ……………… 59
Selecting a light source (White balance) …… 60
Using burst modes
Improving your photos
Applying photo styles ………………………… 63
Applying smart filter effects ………………… 64
Adjusting your photos ……………………… 65
Selecting a resolution and quality
Learn how to change the image resolution and quality settings.
Selecting a resolution
S a p s d v D
As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the file size will also increase.
When taking a photo:
1
In Shooting mode, select f
>
.
(In some modes, select f
.)
2
Select an option.
3840 X 2160
Option Description
4320 X 3240
: Print on A1 paper.
4000 X 3000
: Print on A1 paper.
3984 X 2656
: Print on A2 paper in wide ratio (3:2).
3840 X 2160
: Print on A2 paper in panorama ratio
(16:9) or play back on an HDTV.
3264 X 2448
: Print on A3 paper.
2560 X 1920
: Print on A4 paper.
2048 X 1536
: Print on A5 paper.
1920 X 1080
: Print on A5 paper in panorama ratio
(16:9) or play back on an HDTV.
1024 X 768
: Attach to an email.
Shooting options
43
Selecting a resolution and quality
When recording a video:
1
In the v
and
D
modes, select f
.
2
Select an option.
1280 X 720 HQ
Selecting image quality
a p s d
Photos you take are compressed and saved in JPEG format.
Higher quality images will result in larger sizes.
1
In Shooting mode, select f
>
.
(In some modes, select f
.)
2
Select an option.
Fine
Option Description
1280 X 720 HQ
: Play back high-quality files on an
HDTV.
1280 X 720
: Play back on an HDTV.
640 X 480
: Play back on a general TV.
320 X 240
: Post on a web page.
For Sharing
: Post on a website using the wireless network (30 seconds maximum).
Option Description
Super Fine
Fine
Normal
Shooting options
44
Using the timer
S a p s d v D
Learn how to set the timer to delay shooting.
1
In Shooting mode, select
2
Select an option.
.
Off
3
Press [
Shutter
] to start the timer. t The AF-assist light/timer lamp blinks. The camera will automatically take a photo at the specified time.
t
Select the timer icon or press [
Shutter
] to cancel the timer.
t Depending on the selected face defection option, the timer is not available or some timer options are not available.
Option Description
Off
: The timer is not active.
10 Sec
: Take a photo in 10 seconds.
2 Sec
: Take a photo in 2 seconds.
Double
: Take a photo in 10 seconds and take another in 2 seconds.
Motion Timer
: Detect your movement and then take a photo. (p. 46)
The options may differ depending on the shooting mode.
Shooting options
45
Using the timer
Using the motion timer
1
In Shooting mode, select .
2
3
Press [
Shutter
].
Stand within 3 m from the camera within 6 seconds after pressing [
Shutter
].
4
Make a motion, such as waving your arms, to activate the timer.
t The AF-assist light/timer lamp will start to blink rapidly when the camera detects you.
5
Pose for your photo while the AF-assist light/timer lamp is blinking.
t The AF-assist light/timer lamp will stop blinking just before the camera automatically takes a photo.
The motion timer may not work when: t you are more than 3 m away from the camera t your movements are too subtle t there is too much light or backlight
The detection range of the motion timer
Shooting options
46
Shooting in the dark
Learn how to take photos at night or in low light conditions.
Preventing red-eye
a p s
If the flash fires when you take a photo of a person in the dark, a red glow may appear in the eyes. To prevent this, select
Red-eye
or
Red-eye Fix
. Refer to flash options in “Using the flash.”
Using the flash
S a p s
Use the flash when taking photos in the dark or when you need more light on your photos.
1
In Shooting mode, select
2
Select an option.
.
Auto
Shooting options
47
Option Description
Off
: t
The flash will not fire.
t
Camera shake warning ( shooting in low light.
) will be displayed when
Auto
: The camera will select a proper flash setting for the detected scene in the
S
mode.
Auto
: The flash fires automatically when the subject or background is dark.
Shooting in the dark
Option Description
Red-eye
*: t
The flash fires when the subject or background is dark.
t The camera reduces red-eyes.
Fill in
: t The flash always fires.
t
Light intensity is adjusted automatically.
Slow Sync
: t
The flash fires and the shutter stays open longer.
t Select this when you want to capture ambient light to reveal more details in the background.
t Use a tripod to prevent your photos from blurring.
Red-eye Fix
*: t
The flash fires when the subject or background is dark.
t The camera corrects red-eyes through its advanced software analysis.
The options may differ depending on the shooting mode.
* There is an interval between two bursts of the flash. Do not move until the flash fires a second time.
t Flash options are not available if you set burst options or select
Blink
Detection
or
Self-Portrait
.
t
Make sure that your subjects are within the recommended distance from the flash. (p. 126) t If there is reflected light or much dust in the air, tiny spots may appear on your photo.
Shooting options
48
Adjusting the ISO speed
p
The ISO speed is the measure of a film’s sensitivity to light as defined by the International Organization for Standardization (ISO).
The higher ISO speed you select, the more sensitive to light your camera becomes. With a higher ISO speed, you can get a better photo without using the flash.
1
2
In Shooting mode, select f
.
Select an option.
t
Select to use an appropriate ISO speed based on the brightness of the subject and lighting.
Auto
The higher ISO speed you select, the more image noise you may get.
Changing the camera’s focus
Learn how to adjust the camera's focus according to your subjects.
Using macro
a p d v D
Use macro to take close-up photos of subjects, such as flowers or insects. Refer to macro options in “Using auto focus.”
Using auto focus
a p d v D
To take sharp photos, select the appropriate focus according to your distance from the subject.
1
In Shooting mode, select
2
Select an option.
.
Normal (AF) t Try to hold the camera very still to prevent blurry photos.
t
Turn off the flash if the distance to the subject is less than 40 cm.
Shooting options
49
Option Description
Normal (AF)
: Focus on a subject farther than 80 cm
(farther than 150 cm when using zoom).
Auto Macro
: Focus on a subject farther than 5 cm
(farther than 70 cm when using zoom).
Macro
: Focus on a subject 5 - 80 cm (70 - 150 cm when using zoom).
The options may differ depending on the shooting mode.
Changing the camera’s focus
Using smart touch focus
a p s d
Smart Touch AF allows you to track and auto focus on your subject, even when you are moving.
1
2
In Shooting mode, select f
.
Touch the subject you want to track in the touch area
(indicated by a frame).
t A focus frame will appear on the subject and will follow the subject as you move the camera.
t If you do not touch any area on the screen, the focus frame will appear in the center of the screen.
t
Tracking a subject may fail when:
-
the subject is too small or the subject moves the subject is backlit or you are shooting in a dark place
-
colors or patterns on the subject and the background are the same the camera shakes excessively
In these cases, the focus frame will appear as a white single-line frame.
t
If the camera fails to track the subject, you must reselect the subject to track. t If the camera fails to fix the focus, the focus frame will change to a red single-line frame.
t
If you use this function, you cannot set face detection, photo style options, and smart filter effects.
t
The white frame means that your camera is tracking the subject.
t
The green frame means that your subject is in focus when you half-press [
Shutter
].
Shooting options
50
Changing the camera’s focus
Using one touch shooting
a p s d
You can focus on your subject and take a photo with a touch of your finger.
1
In Shooting mode, select f
.
2
3
Touch a subject to focus.
Touch and hold the subject to take the photo.
t
Touch and hold until the level indicator fills up.
Adjusting the focus area
a p s d
You can get clearer photos by selecting an appropriate focus area according to your subject’s location in the scene.
1
2
In Shooting mode, select f
.
Select an option.
Center AF t
When you use face detection, you should touch and hold the image of detected face. If you touch and hold any other area, the frame to detect faces will change to a normal frame.
t If you use this function, you cannot set burst options, photo style options, and smart filter effects.
Shooting options
51
Option Description
Center AF
: Focus on the center (suitable when subjects are located in the center).
Multi AF
: Focus on one or more of 9 possible areas.
One Touch Shooting
: Focus on the subject by touching the image on the screen. Touch and hold the subject to take the photo.
Smart Touch AF
: Focus on and track the subject that you touch on the screen. (p. 50)
The options may differ depending on the shooting mode.
Using face detection
a p s d
If you use face detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Take photos quickly and easily by using
Blink Detection
to detect closed eyes or
Smile Shot
to capture a smiling face. You can also use
Smart Face Recognition
to register faces and prioritize the focus on them.
Detecting faces
Your camera automatically detects human faces (up to 10 human faces).
t In some scene modes, face detection is unavailable.
t
Face detection may not be effective when:
the subject is far from the camera (The focus frame will appear orange for
Smile Shot
and
Blink Detection
)
it is too bright or too dark
-
-
-
the subject is not facing the camera the subject is wearing sunglasses or a mask the subject is in backlighting or the lighting condition is unstable the subject’s facial expression changes remarkably t
Face detection is not available when using a photo style or a smart filter effect.
t When you use the face detection option, the digital zoom will not work.
t
Depending on the selected face detection option, the timer is not available or some timer options are not available.
t Depending on the selected face detection option, some burst options are not available.
t
When you take photos of detected faces, they will be registered in the face list.
t You can view registered faces in order of priority in Playback mode.
(p. 69) Even though faces are registered successfully, they may not be classified in Playback mode.
t The detected face in Shooting mode may not appear in the face list or Smart Album.
In Shooting mode, select f
. The nearest face appears in a white focus frame and the rest of the faces appear in gr a y focus frames.
t The closer you are to the subject, the quicker your camera will detect faces.
t
If you want to focus faces in gr a y focus frames, touch them to focus.
t When you use the burst option, the detected faces may not be registered.
Shooting options
52
Using face detection
Taking a self portrait shot
Take photos of yourself. The focus distance will be set to closeup and your camera will emit a beep.
Taking a smile shot
The camera automatically releases the shutter when it detects a smiling face.
1
2
In Shooting mode, select f
.
When you hear a quick beep, press [
Shutter
].
To turn the beep on or off, select
Self-Portrait
in the sound settings. (p. 113)
In Shooting mode, select f
. When your subject smiles broadly, your camera can detect the smile more easily.
Shooting options
53
Using face detection
Detecting eye blinking
If your camera detects closed eyes, it will automatically take 2 photos in succession.
Using smart face recognition
The camera automatically registers faces that you frequently photograph. This feature will automatically prioritize the focus on those faces and favorite faces. This feature is available only when you use a memory card.
In Shooting mode, select f
.
t t
Hold your camera still while “
Capturing
” is displayed on the screen.
When blink detection fails, “
Picture taken with eyes closed.
” message appears. Take another photo.
In Shooting mode, select f
. The nearest face appears in a white focus frame and the rest of the faces appear in gr a y focus frames.
t : Indicate favorite faces
(To register favorite faces, see page 55).
t : Indicate faces that the camera automatically registers.
Shooting options
54
Using face detection t The camera may recognize and register faces incorrectly depending on lighting conditions, remarkable changes in the subject's pose or face, and whether or not the subject is wearing glasses. t The camera can automatically register up to 14 faces. If the camera recognizes a new face when there are 14 registered faces, it will replace the face in the lowest priority with the new one. t
The camera can detect up to 10 faces in one scene.
Registering faces as your favorites (My Star)
You can register your favorite faces to prioritize the focus and exposure on those faces. This feature is available only when you use a memory card.
1
In Shooting mode, select f
>
.
(In some modes, select f
.)
2
Align your subject’s face with the oval guideline and press [
Shutter
] to register the face.
t
If the subject’s face is not aligned with the oval guideline, the white frame will not appear.
t
You can take photos of a subject’s face directly from the front, to the left side, to the right side, from above, or from below.
t
Take photos of one person at a time when registering faces.
Shooting options
55
Using face detection
3
Select t
when the face list appears.
Your favorite faces are indicated with a on the face list.
t You can register up to 6 favorite faces.
t
The flash option will be set to
Off
.
t If you register the same face twice, you can delete one of the faces in the face list.
Viewing your favorite faces
In Shooting mode, select f
>
.
(In some modes, select f
.) t
Select to change the ranking of your favorite faces.
See page 69 for more information about the face list.
Shooting options
56
Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.
Adjusting the exposure manually (EV)
p d v D
Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo.
3
Select .
t The adjusted exposure value will appear as shown below.
Darker (-) Neutral (0) Brighter (+)
1
2
In Shooting mode, select f
.
Select a value to adjust the exposure.
t
+: brighter, -: darker
EV
+1 t
Once you adjust the exposure, the setting will remain the same. You may need to change the exposure value later to avoid overexposure or underexposure. t
If you cannot decide on an appropriate exposure, select
AEB
(Auto
Exposure Bracket). The camera takes photos with different exposures: normal, underexposed, and overexposed. (p. 62)
Shooting options
57
Adjusting brightness and color
Compensating for backlighting (ACB)
p
When the light source is behind your subject or there is high contrast between your subject and the background, your subject is likely to appear dark in the photo. In this case, set the Auto
Contrast Balance (ACB) option.
Option Description
Off
: ACB is off.
On
: ACB is on.
t t
The ACB feature is always on in the a
mode.
This feature is not available when
Continuous
,
Motion Capture
, or
AEB
is in use.
Without ACB With ACB
1
2
In Shooting mode, select f
>
.
Select an option.
Off
Shooting options
58
Adjusting brightness and color
Changing the metering option
p d v D
The metering mode refers to the way in which a camera measures the quantity of light. The brightness and lighting of your photos will vary depending on the metering mode you select.
1
In Shooting mode, select f
>
.
(In the v
and
D
modes, select f
.)
2
Select an option.
Multi
Option Description
Spot
: t
Your camera measures only the light intensity of the very center of the frame. t If a subject is not in the center of the scene, your photo may be improperly exposed.
t Suitable for a subject with backlighting.
Center-weighted
: t
Your camera averages the meter reading of the entire frame with emphasis placed on the center.
t Suitable for photos with subjects in the center of the frame.
Option Description
Multi
: t
Your camera divides the scene into several areas, and then measures the light intensity of each area. t Suitable for general photos.
Shooting options
59
Adjusting brightness and color
Selecting a light source (White balance)
p d v D
The color of your photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select an appropriate lighting condition to calibrate the white balance, such as Auto WB, Daylight, Cloudy, or Tungsten.
Auto WB
Cloudy
Daylight
Tungsten
1
In Shooting mode, select f
.
2
Select an option.
Auto WB
Option Description
Auto WB
: Use automatic settings depending on the lighting conditions.
Daylight
: Select when taking outdoor photos on a sunny day.
Cloudy
: Select when taking outdoor photos on a cloudy day or in shadows.
Fluorescent_H
: Select when shooting under a daylight fluorescent or three-way fluorescent light.
Fluorescent_L
: Select when shooting under white fluorescent light.
Tungsten
: Select when taking indoor photos under incandescent bulbs or halogen lamps.
Custom Set
: Use your pre-defined settings. (p. 61)
Shooting options
60
Adjusting brightness and color
Defining your own white balance
You can customize the white balance by taking photos of a white surface, such as a piece of paper. This will help you to match the colors in your photo with the actual scene according to your lighting condition.
1
In Shooting mode, select f
.
2
Aim the lens at a piece of white paper.
3
Press [
Shutter
].
Shooting options
61
Using burst modes
p s
It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.
In these cases, select one of the burst modes.
1
2
In Shooting mode, select f
>
(once or twice) .
Select an option.
Single
Option Description
Motion Capture
: While you are pressing [
Shutter
], the camera takes VGA photos (6 photos per second; maximum of 30 photos).
AEB
: t Take 3 photos with different exposures: normal, underexposed, and overexposed.
t
Use a tripod to prevent blurry photos.
The options may differ depending on the shooting mode.
t You can use the flash, timer, and ACB only when you select
Single
.
t When you select
Motion Capture
, the resolution will be set to
VGA and the ISO speed will be set to
Auto
.
t Depending on the selected face detection option, some burst options are not available.
Option Description
Single
: Take a single photo.
Continuous
: t While you are pressing [
Shutter
], the camera takes photos continuously.
t The maximum number of photos depends on the capacity of your memory card.
Shooting options
62
Improving your photos
Learn how to improve your photos by applying photo styles, colors, or smart filter effects, or make some adjustments.
Applying photo styles
a p d v
Apply different styles to your photos, such as Soft, Vivid, or
Forest.
Defining your own RGB tone
1
In Shooting mode, select f
>
(once or twice)
.
2
3
Select a color (R: Red, G: Green, B: Blue).
Adjust the amount of the selected color.
Soft Vivid Forest
1
In Shooting mode, select f
>
(once or twice) .
2
Select an option.
t Select to define your own RGB tone.
Custom RGB
4
Select .
Normal t
When you select
Sketch
, the photo will be automatically resized to or smaller.
t If you use this function, you cannot set the smart filter and image adjustment options.
Shooting options
63
Improving your photos
Applying smart filter effects
a p d v
Apply various filter effects to your photos to create unique images.
Miniature
Fish-eye 1
Vignetting
Fish-eye 2
1
In Shooting mode, select f
>
(once or twice) .
2
Select an effect.
Option Description
Normal
: No effect
Miniature
: Make a photo of a life-size location or object look like a photo of a miniature scale model.
Blurring parts of the photo makes the scene seem much smaller than it actually is.
Vignetting
: Apply the retro-looking colors, high contrast, and strong vignette effect of lomo cameras.
Fish-eye 1
: Distort close objects to imitate the visual effect of a fisheye lens.
Fish-eye 2
: Blacken the edges of the frame and distort objects to imitate the visual effect of a fisheye lens. t
If you select
Miniature
when recording a video, the miniature recording time is displayed with the icon and is shorter than the real recording time.
t
If you select
Miniature
when recording a video, the sound will not be recorded.
t When you apply a smart filter effect while recording a video, the video will be automatically resized to or smaller.
t
If you use this function, you cannot set the photo style and image adjustment options.
Shooting options
64
Improving your photos
Adjusting your photos
p
Adjust the sharpness, saturation, and contrast of your photos.
1
2
In Shooting mode, select f
>
(twice)
.
Select an adjustment option.
t
: Sharpness t
: Contrast t
: Saturation
3
Select a value to adjust the selected item.
Sharpness
0 +1
Sharpness option Description
-
Soften the edges on your photos (suitable for editing the photos on your computer).
+
Sharpen the edges to improve the clarity of your photos. This may also increase the noise on your photos.
Shooting options
65
Contrast option
-
+
Description
Decrease the color and brightness.
Increase the color and brightness.
Saturation option
-
+
Description
Decrease the saturation.
Increase the saturation.
t
Select
0
if you do not want to apply any effects (suitable for printing).
t If you use this function, you cannot set the smart filter effects.
Playback/Editing
Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your photo printer, TV, or HDTV.
Playing back
Starting Playback mode ……………………… 67
Viewing photos ……………………………… 73
Playing a video ……………………………… 75
Playing a voice memo ……………………… 76
Editing a photo
Rotating a photo …………………………… 78
Resizing photos ……………………………… 78
Applying photo styles ………………………… 79
Applying smart filter effects ………………… 80
Applying a special effect ……………………… 81
Correcting exposure problems ……………… 81
Editing photos of portraits …………………… 82
Creating a print order (DPOF) ………………… 82
Viewing files on a TV or HDTV
Transferring files to your computer
(for Windows)
Transferring files using Intelli-studio ………… 87
Transferring files by connecting the camera as a removable disk ………………………… 89
Disconnecting the camera (for Windows XP) 90
Transferring files to your computer
(for Mac)
Printing photos with a photo printer
(PictBridge)
Playing back
Learn actions to play back photos, videos, or voice memos, and managing files.
Viewing files using motion recognition
You can view files by tilting the camera.
Starting Playback mode
View photos or play videos and voice memos stored in your camera.
1
Press [
Playback
].
t The most recent file you have taken or recorded will be displayed.
t
If the camera is off, it will turn on.
2
Draw a horizontal bar left or right to scroll through files.
t t
Select
<
to view the previous file. Hold to view files quickly.
Select
>
to view the next file. Hold to view files quickly.
t Motion recognition may not work well if you hold the camera parallel to the ground.
t When you rotate the camera 90 o
or 180 o
while viewing a photo, the camera will automatically change the orientation of the displayed photo according to the camera direction.
t To deactivate this function, select
M
.
Gesture View
Off
in Playback mode.
t If you want to view files stored in the internal memory, remove your memory card.
t
The camera will not properly play back files that are too large or those taken with cameras from other manufacturers.
Playback/Editing
67
Playing back
Selecting a menu using motion recognition
Your camera features a built-in motion sensor that allows you to quickly select a menu by tilting the camera.
In Playback mode, tilt the camera while touching and holding .
Set the current photo as your favorite photo*
( will appear on the top of the file.)
Start a slide show (p. 74)
Motion recognition may not work well if you hold the camera parallel to the ground, as shown below.
Lock or unlock the current file
( will appear on the top of the file.)
* You cannot set files as favorites for:
-
-
-
videos or voice memos photos with errors or locked photos photos taken with cameras from other manufacturers photos taken using the motion capture option set
photos that are too large for the available memory
Playback/Editing
68
Playing back
Display in Playback mode
Information
Icon
N
M
Description
Select a menu using motion recognition (p. 68)
Use network menus and the Bluetooth feature (p. 94)
Playback and settings menus
Playback time of videos or voice memos
Play videos or voice memos
(Video p. 75/Voice memo p. 76)
Icon v
Description
Photo includes a voice memo
Video file
Print order has been set (DPOF)
Protected file
Photo includes a registered face; Available only when you use a memory card
Favorite file
Folder name – File name
Open the face list (p. 69); Available only when you use a memory card
Delete files (p. 72)
Play a slide show (p. 74)
Edit photos (p. 78)
Select a display type (p. 26)
Playback/Editing
69
Ranking your favorite faces
You can change the ranking of your favorite faces or delete them.
This feature is available only when you use a memory card.
1
In Playback mode, select .
Face List
1 4
2 5
3 6 t t
Select
Select
1/2
to cancel your favorite faces.
to view your favorite faces or view all faces.
Playing back
2
Select a face.
Edit Ranking
1
2
3
4
Option
Type
Date
Color
Week
Favorite
Face
Description
View files by the file type.
View files by the date they were saved.
View files by the dominant color of the image.
View files by the weekday they were saved.
View your favorite files.
View files by recognized faces and favorite faces.
(Up to 20 people)
It may take some time for the camera to open Smart Album or to change the category and reorganize files.
3
Select
,
or
.
to change the ranking of the face and select .
Viewing files by category in Smart Album
View and manage files by categories, such as date, file type, or week.
1
In Playback mode, select a category.
t You can also access Smart Album by rotating [
Zoom
] left.
Type
Date
Color
Week
Favorite
Face 29 1 6 7 20
Playback/Editing
70
2
Select a date, file type, weekday, color, or face.
t You can also touch and hold
<
or
>
to scroll through dates, file types, weekdays, colors, or faces.
3
4
Select
<
or
>
to scroll through files.
Select to return to the normal view.
Once you select a category and a menu that displays thumbnails (such as deleting multiple files or protecting selected files), the camera will display all files sorted by category or only those that match the category option.
Playing back
Viewing files as thumbnails
Scan thumbnails of files.
In Playback mode, rotate [
Zoom
] left to display 9 or 16 thumbnails (rotate [
Zoom
] right to return to the previous mode).
Protecting files
Protect your files from accidental deletion.
To select and protect files,
1
In Playback mode, select
M
.
2
3
Select
Protect
Select
.
Select files you want to protect.
t t
Select
Select
to select all files.
to cancel your selection.
29 1 6 7 20
To
Scroll through files
View a file
Delete files
Select a category
Do this
Select
<
or
>
.
Select a thumbnail.
Select .
4
Select .
Playback/Editing
71
Playing back
To protect all files,
1
In Playback mode, select
M
.
2
Select
Protect
All
Lock
.
Deleting files
Delete single files or all files at once. You cannot delete protected files.
To delete a single file,
1
2
In Playback mode, select a file
.
Select
Yes
to delete the file.
To delete multiple files,
1
In Playback mode, select
Multiple Delete
.
2
Select files you want to delete. t t
Select
Select
to select all files on the current screen.
to cancel your selection.
3
Select
Yes
.
To delete all files,
1
In Playback mode, select
M
.
2
Select
Delete
All
Yes
.
Alternate way to delete a file
While viewing a file in Playback mode, draw an X on the screen.
Playback/Editing
72
Playing back
Using the recycle bin
If you activate the recycle bin, files you delete will be sent to the recycle bin instead of being deleted permanently. This applies to single files or selected files only–if you choose to delete all files, those files will not be sent to the recycle bin.
To activate the recycle bin,
1
In Playback mode, select
M
.
2
Select
Recycle Bin
On
.
To restore files from the recycle bin,
1
In Playback mode, select
M
.
2
Select
Recycle Bin
Retrieve
.
t This function does not work for videos or voice memos.
t It may take longer to delete files when using the recycle bin function.
t
If you format the internal memory, all files in the recycle folder will be deleted. t The recycle bin will hold up to 10 MB of files. Once you exceed the
10 MB limit, the camera asks you whether to empty the recycle bin.
Select
Yes
to empty the recycle bin or
No
to delete only the current file.
Copying files to the memory card
You can copy files from the internal memory to a memory card.
1
In Playback mode, select
M
.
2
3
Select
.
Copy to Card
.
Select
Yes
to copy files.
Viewing photos
View a photo by changing the orientation by gesture or zooming in on part of a photo or view photos as a slide show.
Rotating a photo by gesture
While viewing a single file, drag your finger as shown below to rotate the photo 90°.
Playback/Editing
73
Playing back
Enlarging a photo
In Playback mode, rotate [
Zoom
] right to enlarge a photo (rotate [
Zoom
] left to reduce a photo).
The enlarged area and zoom ratio are indicated on the top of the screen. The maximum zoom ratio may vary depending on the resolution. Select arrows to move the enlarged area.
Starting a slide show
You can apply effects and audio to your slide show. This function does not work for videos or voice memos.
1
In Playback mode, select
2
Set a slide show effect.
.
Icon Description
Delete the file.
Crop the enlarged photo (it will be saved as a new file).
Go back to the original view.
Playback/Editing
74
Option Description
Images
: Select photos (up to 2.000) for your slide show.
Play Mode
: Select whether or not to loop the slide show.
Interval
: Set the interval between photos. t
This will be available when is selected in the
Effect
menu.
t When used with an effect option other than interval will be set to 1 sec.
, the
Playing back
Option Description
Music
: Select background audio.
Effect
: t
Select a transition effect.
t Select for no effects.
3
Select to start the slide show.
t Touch on the screen (except for option icons) to pause the slide show.
t t
Select to adjust the volume of background audio or to mute the sound.
Select to switch to Playback mode.
Playing a video
You can play a video, capture an image from a video, or crop a video.
1
2
In Playback mode, select a video .
Use the following icons to control playback.
Icon
/
Description
Scan backward.
Pause or resume playback.
Stop playback.
Scan forward.
Adjust volume or mute sound.
Playback/Editing
75
Playing back
Trimming a video during playback
1
Select at the point where you want the new video to begin and select .
2
3
Select
Select
to resume playback.
at the point where you want the new video to end and select .
4
Select
Yes
.
t The original video should be at least 10 seconds long.
t
The edited video will be saved as a new file.
Playing a voice memo
Playing a voice memo
1
In Playback mode, select a voice memo .
2
Use the following icons to control playback.
Capturing an image during playback
1
Select image.
at the point where you want to save a still
2
3
Select
Select
Yes
.
.
A captured image will have the same file size as the original video file and will be saved as a new file.
Playback/Editing
76
Icon
/
Description
Scan backward.
Pause or resume playback.
Stop playback.
Scan forward.
Adjust volume or mute sound.
Playing back
Adding a voice memo to a photo
1
In Playback mode, select a photo
M
.
2
3
Select
Voice Memo
On
.
Press [
Shutter
] to record a short voice memo (10 seconds maximum).
t
Press [
Shutter
] to stop recording a voice memo.
Playing a voice memo added to a photo
1
In Playback mode, select a photo that includes a voice memo .
2
Use the following icons to control playback.
Icon
/
Description
Pause or resume playback.
Stop playback.
Adjust volume or mute sound.
Playback/Editing
77
Editing a photo
Perform photo editing tasks, such as rotating, resizing, eliminating red-eyes, and adjusting brightness, contrast, or saturation.
t Edited photos will be saved as new files.
t When you edit photos that are or larger, they will be automatically resized to a lower resolution (except when rotating or resizing photos).
Rotating a photo
1
2
In Playback mode, select a photo .
Select
an option.
Resizing photos
1
2
In Playback mode, select a photo .
Select t
Select
an option.
to save the photo as a start image. (p. 113)
Left 90˚
1920 X 1080
3
Select .
3
Select .
Available options differ depending on the size of the selected photo.
Playback/Editing
78
Editing a photo
Applying photo styles
Apply a different color tone to the photo, such as Soft, Vivid, or
Forest.
Defining your own RGB tone
1
In Playback mode, select a photo .
2
3
Select a color (R: Red, G: Green, B: Blue).
Adjust the amount of the color.
Custom RGB
Soft Vivid Forest
1
2
In Playback mode, select a photo .
Select t
Select
an option.
to define your own RGB tone.
Soft
4
Select .
3
Select .
Playback/Editing
79
Editing a photo
Applying smart filter effects
Apply various filter effects to your photos to create unique images.
1
2
In Playback mode, select a photo .
Select
an effect.
Miniature
Miniature Vignetting
3
Select .
Fish-eye 1 Fish-eye 2
Playback/Editing
80
Editing a photo
Applying a special effect
Apply special effects to the photo, such as color filters or noise effects.
1
2
In Playback mode, select a photo .
Select
an option.
Elegant
Option Description
Color Filter
: Change background colors to black and white to make the main subject stand out.
Elegant
: Apply effects to the photo to make it brighter and softer.
Add Noise
: Add noise to the photo to give it an aged look.
3
Select .
Correcting exposure problems
Adjust ACB (Auto Contrast Balance), brightness, contrast, or saturation.
Adjusting brightness/contrast/saturation
1
In Playback mode, select a photo .
2
Select an adjustment option.
t : Brightness t : Contrast t : Saturation
3
Select a value to adjust the selected item.
(-: less or +: more)
4
Select .
Adjusting ACB (Auto Contrast Balance)
1
In Playback mode, select a photo .
2
3
Select
Select
.
.
Playback/Editing
81
Editing a photo
Editing photos of portraits
You can improve your photos by hiding facial imperfections and removing red-eye.
Hiding facial imperfections
1
In Playback mode, select a photo .
2
3
Select .
Select a level.
t As the number increases, more imperfections are hidden.
4
Select .
Removing red-eye
1
In Playback mode, select a photo
.
2
3
Select
Select .
.
Creating a print order (DPOF)
Select photos to be printed and set options, such as number of copies or paper size.
t
The memory card can be taken to a print shop that supports DPOF
(Digital Print Order Format) or you can print photos directly through a
DPOF-compatible printer at home.
t Wide photos may print with the left and right edges cut off, so be aware of the dimensions of your photos.
t You cannot set the DPOF for the photos stored in the internal memory.
1
In Playback mode, select
M
.
2
Select
.
DPOF
Select
.
t To print all files, select
All
and skip to step 5.
3
Select photos to print.
t t
Select
Select
to select all files.
to cancel your selection.
4
Select .
Playback/Editing
82
Editing a photo
5
Set DPOF options.
Option Description
Select whether to print the photos as thumbnails.
(Select to print photos as thumbnails.)
Specify the size of the print.
6
7
Select
,
or
.
to set the number of copies.
Select .
If you specify the print size, you can print photos only with DPOF 1.1-compatible printers.
Playback/Editing
83
Viewing files on a TV or HDTV
Play back photos or videos by connecting your camera to a TV using the A/V cable.
1
In Shooting or Playback mode, select
M
.
2
3
Select
.
(twice)
Video Out
.
Select a video signal output according to your country or region. (p. 115)
4
5
Turn off your camera and TV.
Connect your camera to your TV using the A/V cable.
Video Audio
8
View photos or play videos using the touch screen on your camera.
t The touch screen will function as the controller for the TV screen. Locate the option you want on the TV screen and touch where the option is located on the camera screen.
When a pointer appears on the option on the TV screen, select on the camera screen.
t
On some TVs, digital noise may occur or part of an image may not appear.
t Images may not appear centered on the TV screen depending on your TV settings.
t You can capture photos or videos while the camera is connected to a TV.
6
Turn on your TV and select the video output mode using the TV remote control.
7
Turn on your camera and press [
Playback
].
Playback/Editing
84
Viewing files on a TV or HDTV
Viewing files on an HDTV
You can view high-quality and uncompressed photos or videos on an HDTV using the optional HDMI cable. HDMI (High Definition
Multimedia Interface) is supported by most HDTVs.
3
4
1
2
5
In Shooting or Playback mode, select
M
→
.
Select
.
(twice)
→
HDMI Size .
Select an HDMI resolution.
Turn off your camera and HDTV.
Connect your camera to your HDTV using an optional
HDMI cable.
6
Turn on your camera.
•
The HDTV will be powered on automatically and the camera screen will be displayed.
7
View files using a remote control of your camera or
HDTV.
If your HDTV supports the Anynet+(CEC) profile, turn the Anynet+ on in the settings menu (p. 115) to control all connected Samsung A/V devices with the
TV remote control.
Playback/Editing
85
Transferring files to your computer (for Windows)
Transfer files to your computer using the built-in Intelli-studio program. You can also edit files or upload files to your favorite websites.
Requirements for Intelli-studio
Item
CPU
RAM
OS
Hard disk capacity
Others
Requirements
Intel Pentium 4, 3.2 GHz or higher/
AMD Athlon TM FX 2.6 GHz or higher
Minimum 512 MB RAM
(1 GB and above recommended)
Windows XP SP2/Vista/7
250 MB or more (1 GB or more recommended) t CD-ROM driver t nVIDIA Geforce 7600GT or higher/ATI X1600 series or higher t
1024 X 768 pixels, 16-bit color display compatible monitor (1280 X 1024 pixels, 32-bit color display recommended) t USB port, Microsoft DirectX 9.0c or later t Intelli-studio may not perform correctly on some computers, even when the computer meets the requirements.
t
If your computer does not meet the requirements, videos may not play correctly or it may take longer to edit videos.
t Install DirectX 9.0c or above before you use the program.
t You must use Windows XP/Vista/7 or Mac OS 10.4 or later to connect the camera as a removable disk.
Using a self-assembled PC or a PC and OS that are not supported may void your warranty.
Playback/Editing
86
Transferring files to your computer (for Windows)
Transferring files using Intelli-studio
Intelli-studio will start automatically when you connect the camera to your computer with the USB cable.
The battery will be charged while the camera is connected to a computer with the USB cable.
1
In Shooting or Playback mode, select
M
.
2
3
4
Select
.
(twice)
PC Software
On
.
Turn off the camera.
Connect the camera to your computer with the USB cable.
You must plug the end of the cable with the indicator light ( S ) into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.
5
Turn on the camera.
t
The computer recognizes the camera automatically.
If you set the USB option to
Select Mode
, select
Computer
from the pop-up window.
6
Select a folder on your computer to save new files.
t
If your camera has no new files, the pop-up window for saving new files will not appear.
7
Select
Yes
.
t
New files will be transferred to the computer.
For Windows Vista, select
Run iStudio.exe
from the AutoPlay window.
Playback/Editing
87
Transferring files to your computer (for Windows)
Using Intelli-studio
Intelli-studio is a built-in program that allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube.
For details, select
Help
Help
in the program.
t
If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select
Tool
Install Intelli-studio on PC
.
t You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.
t You cannot copy files in your computer to the camera.
t
Intelli-studio supports the following formats:
-
-
Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)
Photos: JPG, GIF, BMP, PNG, TIFF
1 2 3 4 5
15
14
6
7
13 8
12
9
10
11
Playback/Editing
88
Transferring files to your computer (for Windows)
12
13
14
6
7
8
9
10
11
15
Icon
1
2
3
4
5
Description
Open menus
Display files in the selected folder
Change to the Photo edit mode
Change to the Video edit mode
Change to the Sharing mode (You can send files by email or upload files to websites, such as Flickr or YouTube.)
Enlarge or reduce the thumbnails in the list
Select a file type
View files of the selected folder on your computer
Show or hide files of the connected camera
View files of the selected folder on the camera
View files as thumbnails, in Smart Album, or on a map
Browse folders in the connected device
Browse folders in your computer
Move to the previous or next folder
Print files, view files on a map, store files in My Folder, or register faces
Transferring files by connecting the camera as a removable disk
You can connect the camera to your computer as a removable disk.
1
In Shooting or Playback mode, select
M
.
2
3
Select
.
(twice)
PC Software
Off
.
Connect the camera to your computer with the USB cable.
You must plug the end of the cable with the indicator light ( S ) into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.
Playback/Editing
89
Transferring files to your computer (for Windows)
4
Turn on the camera.
t
The computer recognizes the camera automatically.
If you set the USB option to
Select Mode
, select
Computer
from the pop-up window.
5
On your computer, select
My computer
Removable
Disk
DCIM
100PHOTO
.
6
Select the files you want and drag or save them to your computer.
Disconnecting the camera (for Windows XP)
The way to disconnect the USB cable for Windows Vista/7 is similar.
1
If the status lamp on your camera is blinking, wait until it stops.
2
Click screen.
on the tool bar at the bottom right of your PC
3
4
Click the pop-up message.
Remove the USB cable.
The camera may not be removed safely when Intelli-studio is running.
End the program before disconnecting the camera.
Playback/Editing
90
Transferring files to your computer (for Mac)
When you connect the camera to a Macintosh computer, the computer will recognize the device automatically. You can transfer files directly from the camera to the computer without installing any programs.
Mac OS 10.4 or later is supported.
1
Connect your camera to a Macintosh computer with the
USB cable.
You must plug the end of the cable with the indicator light ( S ) into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.
2
Turn on the camera.
t
The computer recognizes the camera automatically and a removable disk icon will be displayed.
If you set the USB option to
Select Mode
, select
Computer
from the pop-up window.
3
4
Double-click the removable disk icon.
Transfer photos or videos to the computer.
Playback/Editing
91
Printing photos with a photo printer (PictBridge)
Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.
1
2
In Shooting or Playback mode, select
M
.
Select
.
(twice)
USB
Printer
.
3
With the printer on, connect your camera to the printer with the USB cable.
5
Select to print.
t Select to set printing options. See “Configuring print settings” on page 93.
4
Turn on your camera.
t The printer recognizes the camera automatically.
6
Select an option.
Option Description
Current Photo
Print the currently selected photo. Skip to step 8.
Selected Photos
All Photos
Print the photos you want.
Print all photos. Skip to step 8.
Playback/Editing
92
Printing photos with a photo printer (PictBridge)
7
8
Select
<
or
>
to scroll to a photo to print.
Select
,
or
.
to set the number of copies and select
.
t
If you selected to print the photos you want, repeat steps 7-8 for all photos to print.
9
Select
Yes
to confirm.
t
Printing starts. Select
Cancel
to cancel printing.
Configuring print settings
Option Description
Date
: Set to print the date.
File Name
: Set to print the name of the file.
Reset
: Reset the print options.
Some options are not supported by some printers.
Option Description
Size
: Specify the size of the print.
Layout
: Create thumbnail prints.
Type
: Select the type of paper.
Quality
: Set the printing quality.
Playback/Editing
93
Wireless network/Bluetooth
Learn to use several functions using wireless local area networks (WLANs) and the Bluetooth feature.
Connecting to a WLAN and configuring network settings
Connecting to a WLAN automatically ………… 95
Connecting to a WLAN manually …………… 96
Network connection tips ……………………… 97
Storing your information ……………………… 98
Storing email addresses ……………………… 98
Setting the file size to share …………………… 99
Configuring the WPS setting ………………… 99
Setting a password …………………………… 99
Changing the password …………………… 100
Checking information ……………………… 100
Entering text ………………………………… 100
Using photo or video sharing websites
Accessing a website ………………………… 101
Uploading photos or videos ………………… 102
Sending photos via email
Viewing photos or videos on the DLNA devices
Viewing photos or videos on a TV screen … 104
Viewing photos or videos on another device
Sending or receiving photos or videos with a camera
Sending photos or videos to another camera 107
Receiving photos or videos from another camera ……………………………………… 107
Sending photos via Bluetooth
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings and learn how to enter text.
This camera uses non-harmonised frequencies and is intended for use in all European countries.
The WLAN can be operated indoors in the EU without restriction, but cannot be operated outdoors in France.
Connecting to a WLAN automatically
1
2
In Shooting or Playback mode, select
N
n
.
Select
AP Setting
.
t
The camera will search for and display available AP devices.
3
Select an AP device.
AP Setting
Samsung 1
Samsung 2
Samsung 3
Icon Description
WPS AP
Secured AP
Ad hoc AP
Signal strength t t
The camera will connect to the WLAN.
If the selected AP device supports the WPS profile, select
WPS
on the next screen and press the WPS button or enter a PIN on the AP device. You can configure the WPS setting to press the WPS button or enter a PIN on the AP device. (p. 99) t
If the selected AP device requires a password, continue with the next step.
Wireless network/Bluetooth
95
Connecting to a WLAN and configuring network settings
4
Select network profiles and options.
Option Description
Authentication Select a network authentication.
Data Encryption Select an encryption type.
5
6
Select the password input field.
Enter a password and select
OK
.
t
For information about entering text, refer to page 100.
7
Select
OK
.
t t
The camera will connect to the WLAN.
On the top line of the screen, you can check the network signal status.
Icon Description
Signal is found.
No signal is found.
Connecting to a WLAN manually
1
2
In Shooting or Playback mode, select
N
n
.
Select
AP Setting
.
t
The camera will search for and display available AP devices.
3
4
5
Select an AP device.
Select
IP Setting
Manual
.
Select the network profiles.
Option Description
IP
Enter the static IP address.
Subnet Mask
Enter the subnet mask.
Gateway
Enter the gateway.
DNS Server Enter the DNS address.
6
7
Enter values and select
OK
.
When you are finished, select
OK
.
t
The camera will connect to the WLAN.
Wireless network/Bluetooth
96
Connecting to a WLAN and configuring network settings
Network connection tips
t Some AP devices will not allow your camera to connect to the network.
t
If you are far from the AP device, it may take long to connect to the network.
t If there is any electronic equipment nearby that uses the same radio frequency (RF) signals, the camera may not connect to the AP device.
t
If the AP device has a non-English name, it may not appear in the search list or the name may appear jumbled or incomplete. t For network profiles and a password, contact your network administrator or network service provider.
t If the network requires any authentication from the service provider, you may not connect to it. Contact your network service provider.
t The number of characters and numbers allowed for the encryption key differs depending on the encryption type.
t A WLAN connection may not be possible depending on your surroundings.
t
When searching for networks, you may be able to find a printer that supports the network. However, you cannot use the printer to connect to a network.
t The camera cannot connect to the network if it is connected to a TV with the A/V cable. Also, when the camera is connected to the network, you cannot view files on a TV screen even when connected with the A/V cable.
t
When connecting to the network, you will be charged according to your contract with your network service provider.
t You can use only free WLANs with your camera. If you use free WLANs that require the user agreement and additional information when you connect to a web browser, some features may be limited when connecting to websites or sending email.
t
Frequency ranges allow you to connect to the network will differ depending on the country. t The WLAN feature of your camera must comply with radio transmission laws, so use of this feature may be restricted in some countries. We recommend that you use the WLAN feature in the country where you purchased the camera.
t For network profiles and a password, contact your network administrator or network service provider.
t Methods of configuring the network profiles may differ depending on the network environment.
t
Do not access a network that you are not allowed to use.
t Use a fully charged battery while connecting to the network.
t When connecting to the network using Auto IP, make an autoip.txt file and copy it to the inserted memory card.
Wireless network/Bluetooth
97
Connecting to a WLAN and configuring network settings
Storing your information
Store your name and email address to send emails or to find out your camera on another device.
1
In Shooting or Playback mode, select
N
n
.
2
3
Select
User Setting
.
Select the name input field and enter your name.
t
For information about entering text, refer to page 100.
4
5
6
When you are finished, select
OK
.
Select the email input file and enter your email address.
When you are finished, select
OK
.
7
Select
OK
to save your information.
Storing email addresses
Store up to 10 email addresses in your camera. You can use them when you send your photos via email.
1
2
In Shooting or Playback mode, select
N
n
.
Select
Email Address
.
Email Address Book
Samsung t t t
Select
Select
Select
to display the recent recipient email addresses.
to edit the email address.
to delete the email address.
3
4
5
Select .
Enter a name and email address.
When you are finished, select
OK
.
Wireless network/Bluetooth
98
Connecting to a WLAN and configuring network settings
Setting the file size to share
Set the file size you will share with other DLNA-authorised devices. You can select either the original size or .
1
In Shooting or Playback mode, select
N
n
.
2
3
Select
DLNA -Image Size
.
Select a size.
Configuring the WPS setting
Configure this setting to press a WPS button or enter a PIN when connecting to a WLAN with an AP device that supports the WPS profile.
1
In Shooting or Playback mode, select
N
n
.
2
3
Select
.
WPS Type
.
Select
PBC
to press the WPS button or
PIN
to enter a
PIN.
Setting a password
Restrict sending emails and configuring network settings by setting a password.
1
In Shooting or Playback mode, select
N
n
.
2
3
4
Select
.
Setting Password
On
Confirm
.
Enter a password (4 digits).
Enter the password (4 digits) again.
To reset a password, select
Reset
from the password input window.
If you reset the password, your stored email addresses, recently sent email addresses, and all personal information will be deleted to protect user information.
Wireless network/Bluetooth
99
Connecting to a WLAN and configuring network settings
Changing the password
Change the password if necessary.
1
In Shooting or Playback mode, select
N
n
.
2
3
Select
.
Change Password
.
Enter the current password (4 digits).
4
5
Enter a new password (4 digits).
Enter the new password (4 digits) again.
Checking information
Check the Mac address and serial number of your camera to register it with the Samsung website.
1
2
In Shooting or Playback mode, select
N
n
.
Select
.
Device Information
.
Entering text
To enter text when storing your information or email addresses, select the appropriate letters, symbols, and numbers.
User Setting: Name
Icon Description
Move the cursor.
Enter capital letters or small letters, and change symbols.
Enter letters.
Enter a space.
Delete the last letter.
Enter numbers and symbols.
Store the displayed text.
You can enter text only in English, regardless of the display language.
Wireless network/Bluetooth
100
Using photo or video sharing websites
Upload your photos or videos to file sharing websites (available websites will be displayed on your camera).
Icons on a website
Accessing a website
1
In Shooting or Playback mode, select
N
.
t The camera automatically connects to the WLAN via the last connected AP device. t If the camera has not connected to the WLAN, it automatically searches for available AP devices. (p. 95)
2
3
Select a website.
Enter your login ID and password, and select
Login
.
Create your login ID and password on a PC in advance.
Icon Description
Previous page
Next page
Stop
Refresh
Home
Close
Wireless network/Bluetooth
101
Using photo or video sharing websites
Uploading photos or videos
1
Select .
2
3
Select
<
or
>
to scroll through files.
Drag photos or videos to the selection area or select photos or videos, and select
OK
.
Date t
Select
Date
to categorise the files. (p. 70)
4
Enter a title and select an album, and then select .
t The maximum photo resolution you can upload is , and the longest video you can upload is 30 seconds at 320 X 240 resolution or the video recorded using
For Sharing
.
t If the selected photo resolution is higher than automatically resized to a lower resolution.
, it will be t
When the total size of all photos selected is smaller than 10 MB, you can upload them to a website (up to 20 photos).
t Methods of uploading photos or videos may differ depending on the selected website.
t
If you cannot access a website because of firewall or user authentication settings, contact your network administrator or network service provider.
t
When you are not able to upload photos or videos due to server errors, select .
t Titles for photos or videos you are uploading could be the date they are captured.
t
The speed of your internet connection may affect how quickly photos upload or web pages open.
Wireless network/Bluetooth
102
Sending photos via email
1
In Shooting or Playback mode, select
N
.
t The camera automatically connects to the WLAN via the last connected AP device. t If the camera has not connected to the WLAN, it automatically searches for available AP devices. (p. 95)
2
Enter email addresses for the sender and receiver.
Sender/ Receiver
Samsung
Samsung 1 t t t
Select
Select
Select
to enter or modify the email address of the sender.
to retrieve the stored email addresses.
to enter an email address manually.
3
Select
OK
.
4
Select
Text Input
and enter your email text.
5
Select photos, or drag photos to the selection area and select
OK
.
t t
The photos will be sent to the selected email addresses.
The
Transfer completed.
message will still appear, even when photos cannot be sent or be sent as spam due to an error with the recipient's email account.
t When the total size of all photos selected is smaller than 10 MB, you can send them via email (up to 20 photos).
t
You can enter up to 10 recipients for each email.
t You may not be able to send an email due network connection or email account settings.
t
The maximum photo resolution you can send is and if the selected photo resolution is higher than , it will be automatically resized to a lower resolution.
t If you cannot send an email because of firewall or user authentication settings, contact your network administrator or network service provider.
t When there are no photos in the camera memory, you cannot use this feature.
Wireless network/Bluetooth
103
Viewing photos or videos on the DLNA devices
The Digital Living Network Alliance (DLNA) is an international technology standard for sharing media files between networked devices in your home. With this technology, you can view your photos or videos on a widescreen TV or another device. You cannot send or receive voice memos.
Viewing photos or videos on a TV screen
View your photos or videos on a TV that supports the DLNAauthorized Digital Media Player (DMP).
1
In Shooting or Playback mode, select
N
.
t The camera automatically connects to the WLAN via the last t connected AP device.
If the camera has not connected to the WLAN, it automatically searches for the available AP devices. (p. 95)
2
Select
Selected Files
.
t To share all files, select
All Files
and skip to step
4
.
3
Select photos or videos to share.
You can share up to 1000 photos or videos.
4
On the TV, search for the camera and browse the shared photos or videos.
t Your camera’s name is what you entered in the user setting.
(p. 98) t For information about searching for the camera and browsing the photos or videos on the TV, refer to the TV user manual.
t Videos may not play smoothly depending on type of TV or network condition. If this happens, re-record the video in
640X480 or 320X240 quality and play it again. If videos do not play smoothly on your TV over the wireless connection, connect the camera to the TV with an HDMI or AV cable.
AP
Wireless network/Bluetooth
104
Viewing photos or videos on the DLNA devices t
On a TV screen, you can view only photos or videos captured with your camera.
t The distance between the camera and TV may be affected by the
AP device.
t
If the camera is connected to 2 TVs, playback may be slowed.
t The photos will be shared according to the size you set. (p. 99)
The videos will be shared in their original sizes. t
You can use this feature only with a DLNA-authorised Digital Media
Players (DMPs).
t Shared photos or videos will not be stored on the TV, but they can be stored according to the TV specifications.
t
Transferring photos or videos to the TV may take some time depending on the network connection and the file size.
t
If you power off the camera abnormally while viewing photos or videos on a TV (ex. removing battery), the TV considers the camera to still be connected.
t
The order of photos or videos on the camera and TV could be different.
t According to the number of photos or videos you want to share, it may take some time to load your photos or videos and complete the initial set-up process.
t While viewing photos or videos on the TV, continuously using the TV remote or performing additional operations on the TV may prevent this feature from working properly.
t
If you reorder or sort files on the camera while viewing them on a TV, you must repeat the initial set-up process to update the list of files on the TV.
t
When there are no photos or videos in the camera memory, you cannot use this feature.
Viewing photos or videos on another device
(renderer)
1
In Shooting or Playback mode, select
N
.
t
The camera automatically connects to the WLAN via the last connected AP device. t
If the camera has not connected to the WLAN, it automatically searches for the available AP devices. (p. 95) t
If the camera has connected to the WLAN, it automatically searches for and displays the available DLNA-enabled devices. However, searching for the devices may take some time.
2
Select a device (renderer) that will play the photos or videos.
3
Drag a photo or video to the selection area or select a photo or video.
t t
The photos or videos will appear on the device’s screen.
To view other photos or videos, drag a photo or video to the selection area one by one on your camera.
Wireless network/Bluetooth
105
Viewing photos or videos on the DLNA devices t When searching for DLNA-authorised devices on the network, the camera may not find all devices on the network.
t
If you power off the device abnormally while viewing photos or videos on a device, the camera considers the device to still be connected.
t The photos will be shared according to the size you set. (p. 99)
The videos will be shared in their original sizes.
t You can use this feature only with a DLNA-authorised renderer.
t The shared photos or videos will not be stored on the device, but they can be stored according to the device specifications.
t
Transferring photos or videos to the device may take some time depending on the network connection and the file size.
t You can transfer files one by one.
t
When there are no photos or videos in the camera memory, you cannot use this feature.
t On other devices (renderer), you can view only photos or videos captured with your camera.
t
When you search for other devices, searching for devices may take some time depending on the network connection. In this case, try again.
Wireless network/Bluetooth
106
Sending or receiving photos or videos with a camera
Learn to send or receive photos or videos to or from camera of the same model. You cannot send or receive voice memos.
Sending photos or videos to another camera
1
In Shooting or Playback mode, select
N
.
2
Select
Send
.
t The camera generates a password and displays it on the screen while waiting for a connection with the receiving camera.
3
On the receiving camera, select the name of the sending camera.
t The sending camera’s name is what you entered in the user setting. (p. 98)
4
Enter the password (4 digits) on the receiving camera.
t The selection area automatically appears on the sending camera.
5
Drag photos or videos to the selection area or select them.
t The photos or videos will be sent to the receiving camera.
Receiving photos or videos from another camera
1
In Shooting or Playback mode, select
N
.
2
Select
Receive
.
t On the sending camera, select
Send
and after some time, select
Receive
.
3
4
Select the name of the sending camera.
Enter the sending camera’s password and select
OK
.
t
The password will appear on the screen of the sending camera.
t
When the sending camera transmits photos or videos, they will appear on the receiving camera.
Wireless network/Bluetooth
107
Sending or receiving photos or videos with a camera t This feature uses an ad hoc wireless network.
t
You cannot send and receive files at the same time. Once you have received files, end the connection with the camera and then reconnect to the camera to send photos or videos.
t The distance between two cameras may be affected by the efficiency of the ad hoc wireless network.
t If a camera turns off abnormally while sending or receiving photos or videos, the other camera considers the camera to still be connected.
Cameras will be disconnected after some time.
t
It may take some time to send or receive photos or videos depending on the file size and the ad hoc network connection.
t You can transfer files one by one.
t
If you fail to receive or send a photo or videos, it will not be saved on the receiving camera.
t When there are no photos in the camera memory, you cannot use this feature.
t
You can send and receive photos or videos taken with your camera or other camera only.
t If you select the original size in the DLNA-image size setting, you can send or receive the photos without transformation. However, if you select and the selected photo resolution is higher than , it will be automatically resized to a lower resolution. (p. 99) t You can send or receive videos smaller than 35 MB only.
Wireless network/Bluetooth
108
Sending photos via Bluetooth
Bluetooth is a wireless protocol for exchanging data over short distances. With Bluetooth, you can send photos to other mobile phones or
PDAs. However, you cannot receive photos from other devices and you cannot send videos or voice memos.
1
In Shooting or Playback mode, select
N
.
t The Bluetooth feature turns on. However, other Bluetoothenabled devices cannot find your camera.
2
To search for and display Bluetooth-enabled devices, select
Yes
.
t
If you have searched for the Bluetooth-enabled devices, a list of Bluetooth-enabled devices appears. Select to search again.
3
Select a Bluetooth-enabled device.
Bluetooth: Device Search
Samsung 1
Samsung 2
4
Enter a password (4~6 digits) and select
OK
.
t
If you enter a 6-digit password, you do not need to select
OK
.
5
6
Enter the same password on the device.
Drag photos to the selection area or select photos.
Select Images
Date t t
The photos will be sent to the selected device.
The photo size will be changed to 640 X 480 (VGA).
t t
Select
.
to view other devices.
When searching for Bluetooth-enabled devices, you may be able to find other devices. However, you can send photos only to mobile phones or PDAs.
Wireless network/Bluetooth
109
Sending photos via Bluetooth
7
After sending is complete, select t
Yes
.
The camera and the device are disconnected and the
Bluetooth feature turns off.
t
You can send photos only to Bluetooth-enabled phones or PDAs that support the Object Push Profile (OPP). For details about OPP, visit http://gadgetguide.bluetooth.com.
t
The camera may not search for a specific Bluetooth-enabled device and send a photo to it depending on the device type.
t If the other device does not have enough memory, the photo may not be transferred. Delete some photos to free up some memory and try sending again.
t You cannot connect to several Bluetooth-enabled devices at one time.
t Place the camera and the Bluetooth-enabled device reasonably close to one another.
t
The camera may cause interference with other devices that use or produce radio waves.
t When there are no photos in the camera memory, you cannot use this feature.
t Some phones or PDAs may not display photos you sent via Bluetooth.
Wireless network/Bluetooth
110
Appendixes
Refer to settings, error messages, specifications, and maintenance tips.
Settings menu
Accessing the settings menu …………………………… 112
Sound settings ………………………………………… 113
Display settings ………………………………………… 113
Camera settings ………………………………………… 114
Error messages
Camera maintenance
Cleaning your camera ………………………………… 118
About memory cards …………………………………… 119
About the battery ……………………………………… 120
Before contacting a service center
Camera specifications
FCC notice
Index
Settings menu
Learn about various options to configure your camera's settings.
Accessing the settings menu
1
In Shooting or Playback mode, select
M
.
2
Select a menu.
Volume
Beep Sound
Shutter Sound
Start Sound
AF Sound
: Medium
: On
: 1
: Off
: On
1/2
Icon Description
Sound settings
: Set various camera sounds and volume. (p. 113)
Display settings
: Customize the display settings, such as brightness. (p. 113)
Camera settings
: Change the settings for the camera system, such as memory format, default file name, and
USB mode. (p. 114)
3
Select an option and save your settings.
Volume
Beep Sound
Shutter Sound
Start Sound
AF Sound
Off
Low
Medium
High
1/2
4
Select to return to the previous screen.
Appendixes
112
Settings menu
Sound settings
Item
Volume
Beep Sound
Shutter Sound
Start Sound
AF Sound
Self-Portrait
* Default
Description
Adjust the volume of any sound.
(
Off
,
Low
,
Medium
*,
High
)
Select a sound to be emitted when touching on the screen or switching modes. (
Off
,
On
*)
Select a sound to be emitted when pressing the shutter button. (
Off
,
1
*,
2
,
3
)
Select a sound to be emitted when turning on your camera. (
Off
*,
1
,
2
,
3
)
Set a sound to be emitted when half-pressing the shutter button. (
Off
,
On
*)
Set to emit a sound when the camera detects your face. (
Off
,
On
*)
Display settings
Item
Function
Description
Start Image
* Default
Description
Display a brief description of an option or menu.
(
Off
,
On
*)
Set a start image to display when the camera turns on.
t
Off
*: Display no start image.
t
Logo
: Display a default image stored in the internal memory. t
User Image
: Display the image you want. (p. 78) t Only one start image will be saved in the internal memory.
t If you select a new photo as a start image or reset your camera, the current image will be deleted.
Grid Line
Display
Brightness
Select a type of the grid lines that help you to compose a scene. (
2 X 2
*,
3 X 3
,
+
,
X
)
Adjust the brightness of the screen.
(
Auto
*,
Dark
,
Normal
,
Bright
)
Normal
is fixed in Playback mode even if
Auto
is selected.
Appendixes
113
Settings menu
Item
Quick View
Power Save
* Default
Description
Set the duration for reviewing a captured image before returning to Shooting mode.
(
Off
,
0.5 sec
*,
1 sec
,
3 sec
)
If you perform no operations for 30 seconds, the camera automatically switches to Power save mode
(press any button to deactivate the Power save mode). (
Off
*,
On
)
Camera settings
Item
Format
Reset
* Default
Description
Format the internal memory and the memory card
(all files-including the protected files-will be deleted).
(
No
,
Yes
)
If you use a memory card used with cameras from different manufacturers or a memory card reader, or one formatted on a computer, your camera may read the card incorrectly.
Format the card before using it.
Reset menus and shooting options (date and time, language, and video output settings will not be reset).
(
No
,
Yes
)
Item
Language
Date & Time
Time Zone
File No.
* Default
Description
Select a language for the display text.
Set the date and time and select a date format.
(
Off
*,
yyyy/mm/dd
,
mm/dd/yyyy
,
dd/mm/yyyy
)
Select a region and set the daylight-saving time
(DST).
Specify how to name files.
t
Reset
: Set the file number to start from 0001 when inserting a new memory card, formatting a memory card, or deleting all files.
t
Series
*: Set the file number to follow the previous file number when inserting a new memory card, formatting a memory card, or deleting all files.
t The default name of the first folder is 100PHOTO and the default name of the first file is SAM_0001.
t
The file number increases one by one from
SAM_0001 to SAM_9999.
t The folder number increases one by one from
100PHOTO to 999PHOTO.
t
The maximum number of files that can be stored in one folder is 9999.
t The camera defines file names according to the
Digital rule for Camera File system (DCF) standard.
If you change the names of files intentionally, the camera may not play back the files.
Appendixes
114
Settings menu
Item
Imprint
Auto Power
Off
AF Lamp
Anynet+
(HDMI-CEC)
* Default
Description
Set whether to display the date and time on your photos when printing. (
Off
*,
Date
,
Date & Time
) t
The date and time will be displayed on the bottomright corner of the photo in yellow.
t The date and time may not be printed on some t printer models.
If you select
Text
in the s
mode, the date and time will not be displayed.
Set the camera to automatically turn off when you are not using it. (
Off
,
1 min
,
3 min
*,
5 min
,
10 min
) t Your settings will not change after replacing the battery.
t
The camera will not automatically turn off when:
-
it is connected to a computer or printer you are playing a slide show or videos
you are recording a voice memo
Set an assistant light to help you focus in dark places.
(
Off
,
On
*)
Set to control the camera connected to a Samsung
HDTV that supports Anynet+(CEC) with the TV remote control.
t
Off
*: View files without using an HDTV remote control.
t
On
: Control the camera with an HDTV remote control.
Item
HDMI Size
Video Out
* Default
Description
Select the resolution of photos when playing back files on an HDTV with the HDMI cable.
(NTSC:
1080i
*,
720p
,
480p
/
PAL:
1080i
*,
720p
,
576p
) t If the HDTV does not support the selected resolution, the HDTV automatically selects the next lower resolution.
t If you select
480p
or
576p
, the playback menus and Smart Album will not be available when connected to a TV.
Set the video signal output according to your region.
t
NTSC
*: USA, Canada, Japan, Korea, Taiwan,
Mexico t
PAL
(supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, England, Finland,
Germany, Italy, Kuwait, Malaysia, Netherlands,
New Zealand, Norway, Singapore, Spain, Sweden,
Switzerland, Thailand
Appendixes
115
Settings menu
Item
USB
PC Software
Calibration
* Default
Description
Set the function to use via a USB connection with a computer or printer.
t
Computer
*: Connect your camera to a computer for transferring files.
t
Printer
: Connect your camera to a printer for printing files.
t
Select Mode
: Select a USB mode when you connect your camera to another device.
Set Intelli-studio to start automatically when you connect your camera to your computer. (
Off
,
On
*)
Calibrate the screen so that your camera will properly recognize the input.
Appendixes
116
Error messages
When the following error messages appear, try these remedies.
Error message
Card Error
Card not supported.
Connection failed.
DCF Full Error
Suggested remedies t
Turn off your camera and then turn it on again.
t Remove your memory card and insert it again.
t Format your memory card. (p. 114)
The inserted memory card is not available with your camera. Insert a microSD TM memory card.
t
The camera cannot connect to the network using the selected access point. Select another and try again.
t The camera fails to connect to another
Bluetooth-enabled device or a camera of the same model. Try connecting again.
File names do not match the DCF standard.
Transfer the files on the memory card to your computer and format the card. (p. 114)
Device disconnected.
Connect to a device again.
File Error
Initialization failed.
Invalid password.
Delete the damaged file or contact a service center.
Turn on DLNA-authorised devices on the network.
The password for transferring files to another
Bluetooth-enabled device or a camera of the same model is wrong. Enter the correct password again.
Error message
Low Battery
Memory Full
No Image File
Photo reception failed.
Transfer failed.
Suggested remedies
Insert a charged battery or recharge the battery.
Delete unnecessary files or insert a new memory card.
Take photos or insert a memory card that has some photos.
The camera fails to receive a photo from the sending camera. Try sending again.
The camera fails to send a photo. Try sending again.
Appendixes
117
Camera maintenance
Cleaning your camera
Camera lens and touch screen
Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of cleaning paper and wipe gently.
Camera body
Wipe gently with a soft, dry cloth.
t Never use benzene, thinners, or alcohol to clean the device. These solutions can damage the camera or cause it to malfunction.
t Do not press on the lens cover or use a blower brush on the lens cover.
Appendixes
118
Camera maintenance
About memory cards
Memory cards you can use
You can use microSD TM (Secure Digital) memory cards.
Memory card capacity
The memory capacity may differ depending on shooting scenes or shooting conditions. These capacities are based on a 1 GB microSD TM card: e o s
*
V i d
P h o t o s
Size Super Fine Fine Normal 60 FPS 30 FPS 15 FPS
122 240 353 -
142
160
278
312
409
454
-
-
-
-
-
-
206
211
335
401
409
637
588
594
908
-
-
-
-
-
-
-
-
-
510
762
936 1,314
1,373 1,931 -
-
-
-
-
-
1,626
-
-
-
-
-
2,575 3,090
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Approx.
79' 13"
-
Approx.
13' 30"
Approx.
23' 36"
Approx.
15' 20"
Approx.
37' 50"
Approx.
138' 19"
Approx.
138’ 19”
Approx.
32' 33"
Approx.
67' 30"
Approx.
237' 41"
-
* The recordable time may vary if you use the zoom.
Several videos were recorded in succession to determine the total recording time.
Appendixes
119
Camera maintenance
About the battery
Use only Samsung-approved batteries.
Battery specifications
Mode
Type
Cell capacity
Voltage
Charging time
(when the camera is switched off)
SLB-11A
Lithium-ion battery
1130 mAh
3.8 V
Approx. 190 min
Battery life
Average time /
Number of photos
Test conditions
(when the battery is fully charged)
This is measured under the following conditions: in the a
mode, 14M resolution, Fine quality, OIS on.
Photos
Videos
Approx. 120 min/
Approx. 240 photos
Approx. 80 min
1. Set the flash option to
Fill in
, take a single shot, and zoom in or out.
2. Set the flash option to
Off
, take a single shot, and zoom in or out.
3. Perform steps 1 and 2 for 30 seconds and repeat for 5 minutes.
Then turn off the camera for 1 minute.
4. Repeat steps 1 to 3.
Record videos at 1280 X 720 HQ resolution and 30 fps.
t The figures above are measured by Samsung’s standards and may differ depending on actual usage.
t Several videos were recorded in succession to determine the total recording time.
Appendixes
120
Camera maintenance
Notes about charging the battery
t If the indicator light is off, make sure that the battery is inserted correctly.
t Turn off your camera when charging.
t Turn on your camera after charging the battery for more than 10 minutes. t
Using the flash or recording videos depletes the battery quickly.
Charge the battery until the indicator light turns green.
t If the indicator light blinks in orange or does not illuminate, reconnect the cable, or remove the battery and insert it again.
t
If you charge the battery when the cable is overheated or the temperature is too high, the indicator light may turn orange. Charging will start when the battery cools down.
Notes about charging with a computer connected
t Use only the provided USB cable.
t The battery may not be charged when:
you use a USB hub
other USB devices are connected to your computer
you connect the cable to the port on the front side of your computer
the USB port of your computer does not support the power output standard (5 V, 500 mA)
Appendixes
121
Camera maintenance
Personal injury or death can occur if the battery is handled carelessly or improperly. For your safety, follow these instructions for proper battery handling:
t The battery can ignite or explode if not handled properly. If you notice any deformities, cracks, or other abnormalities in the battery, immediately discontinue use of the battery and contact your manufacturer.
t
Use only authentic, manufacturer-recommend battery chargers and adapters and charge the battery only by the method described in this user manual.
t Do not place the battery near heating devices or expose to excessively warm environments, such as the inside of an enclosed car in the summertime.
t Do not place the battery in a microwave oven.
t Avoid storing or using the battery in hot, humid places, such as spas or shower enclosures. t
Do not rest the device on flammable surfaces, such as bedding, carpets, or electric blankets for a prolonged period. t When the device is switched on, do not leave it in any confined space for a prolonged period.
t
Do not allow battery terminals to come in contact with metallic objects, such as necklaces, coins, keys, or watches.
t Use only authentic, manufacturer-recommended, Lithiumion replacement batteries.
Appendixes
122 t Do not disassemble or puncture the battery with any sharp object. t Avoid exposing the battery to high pressure or crushing forces. t
Avoid exposing the battery to major impacts, such as dropping it from high places.
t Do not expose the battery to temperatures of 60° C
(140° F) or above.
t
Do not allow the battery to come in contact with moisture or liquids.
t Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Disposal guidelines
t
Dispose of the battery with care.
t Do not dispose of the battery in a fire.
t Disposal regulations may differ by country or region.
Dispose of the battery in accordance with all local and federal regulations.
Guidelines for charging the battery
Charge the battery only by the method described in this user manual. The battery can ignite or explode if not charged properly.
Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before contacting a service center. If you have attempted the troubleshooting solution and are still having problems with your device, contact your local dealer or service center.
Situation
Cannot turn on the camera
The power turns off suddenly
The camera is losing battery power quickly
Suggested remedies t
Make sure that the battery is inserted.
t
Make sure that the battery is inserted correctly.
t Charge the battery.
t Charge the battery.
t Your camera may be in Power save mode. (p. 114) t
The camera may turn off to prevent the memory card from being damaged due to an impact. Turn on your camera again.
t
The battery may lose power more quickly in low temperatures (below 0° C). Keep the battery warm by putting it into your pocket.
t
Using the flash or recording videos depletes the battery quickly. Recharge if needed.
t Batteries are consumable parts that must be replaced over time. Get a new battery if the battery life is diminishing quickly.
Situation
Cannot take photos
Suggested remedies t There is no space on the memory card.
Delete unnecessary files or insert a new card.
t
Format the memory card. (p. 114) t
The memory card is defective. Get a new memory card.
t Make sure that the camera is switched on.
t
Charge the battery.
t
Make sure that the battery is inserted correctly.
The camera freezes
The flash does not work
The flash fires unexpectedly
The date and time are incorrect
The touch screen or buttons do not work
Remove the battery and insert it again.
t
The flash option may be set to
Off
.
(p. 47) t You cannot use the flash in the d
, v
,
D
, or some s
modes.
The flash may fire due to static electricity.
This is not a malfunction of the camera.
Set the date and time in the display settings menu. (p. 114)
Remove the battery and insert it again.
Appendixes
123
Before contacting a service center
Situation
The camera screen works poorly
The memory card has an error
Cannot play back files
The photo is blurry
Suggested remedies
If you use your camera at very low temperatures, it may cause the camera screen to malfunction or discolor.
For better performance of your camera screen, use your camera in moderate temperatures.
The memory card has not been reset.
Format the card. (p. 114)
If you change the name of a file, your camera may not play the file (the name of the file should meet the DCF standard). If you encounter this situation, play back files on your computer.
t Make sure that the focus option you set is suitable for close-up shots. (p. 49) t Make sure that the lens is clean. If not, clean the lens. (p. 118) t
Make sure that the subject is within range of the flash. (p. 126)
The colors in the photo do not match the actual scene
An incorrect white balance can create unrealistic color. Select the proper white balance option to suit the light source.
(p. 60)
Situation
The photo is too bright
The photo is too dark
The TV does not display your photos
Suggested remedies t Turn off the flash. (p. 47) t Your photo is overexposed. Adjust the exposure value. (p. 57)
Your photo is underexposed.
t
Turn on the flash. (p. 47) t
Adjust the ISO speed. (p. 48) t
Adjust the exposure value. (p. 57) t
Make sure that the camera is correctly connected to the external monitor with the A/V cable.
t Make sure that your memory card contains photos.
Your computer does not recognize your camera t Make sure that the USB cable is connected correctly.
t
Make sure that your camera is switched on.
t Make sure that you are using a supported operating system.
Your computer disconnects the camera while transferring files
The file transmission may be interrupted by static electricity. Disconnect the USB cable and connect it again.
Appendixes
124
Before contacting a service center
Situation
Your camera cannot play videos
Intelli-studio is not functioning properly
Suggested remedies t You can play videos only with the Intellistudio program. Install the program on your computer. (p. 88) t
Make sure that the USB cable is connected correctly.
t End Intelli-studio and restart the program.
t You cannot use Intelli-studio on
Macintosh computers.
t Make sure that the
PC Software
is set to
On
in the settings menu. (p. 116) t
Depending on your computer's specification and environments, the program may not launch automatically.
In this case, click
Start
My
Computer
Intelli-studio
iStudio.exe
on your computer.
Appendixes
125
Camera specifications
Image sensor
Type
Effective pixels
Total pixels
Lens
Focal length
F-stop range
Digital zoom
Display
Type
Feature
Focusing
Type
Range
1/2.3" (Approx. 7.76 mm) CCD
Approx. 14.2 mega-pixels
Approx. 14.5 mega-pixels
Schneider-KREUZNACH lens f = 5.6 - 39.2 mm
(35 mm film equivalent: 31 - 217 mm)
F3.3 (W) - F5.5 (T) t
Still image mode: 1.0X - 7.0X
t
Play mode: 1.0X - 13.5X (depending on image size)
WVGA AMOLED
3.7" (9.4 cm) Wide Full Touch Screen Panel
TTL auto focus (Multi AF, Center AF, Face Recognition
AF, Face Detection AF, Smart Touch AF, One Touch
Shooting)
Normal
Macro
Auto Macro
Wide (W)
80 cm - infinity
5 cm - 80 cm
5 cm - infinity
Tele (T)
150 cm - infinity
70 cm - 150 cm
70 cm - infinity
Shutter speed t t
Auto : 1/8 - 1/2,000 sec.
Program : 1 - 1/2,000 sec.
t t
Night : 8 - 1/2,000 sec.
Fireworks : 2 sec.
Exposure
Control
Metering
Compensation
ISO equivalent
Flash
Program AE
Multi, Spot, Center-weighted
±2EV (1/3EV steps)
Auto, 80, 100, 200, 400, 800, 1600, 3200
Mode
Range
Off, Auto, Red-eye, Fill in, Slow Sync, Red-eye Fix t
Wide: 0.3 m - 3.2 m (ISO Auto) t
Tele: 0.5 m - 1.9 m (ISO Auto)
Recharging time Approx. 4 sec.
Shake reduction
DUAL IS [Optical Image Stabilization (OIS) +
Digital Image Stabilization (DIS)]
Appendixes
126
Camera specifications
Effect
Shooting mode t Photo Style Selector : Normal, Soft, Vivid, Forest,
Retro, Cool, Calm, Classic, Negative, Sketch,
Defog, Custom RGB t
Smart Filter : Normal, Miniature, Vignetting,
Fish-eye 1, Fish-eye 2 t
Image Adjust : Sharpness, Contrast, Saturation
White Balance
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten,
Custom Set
Date Imprinting
Date & Time, Date, Off
Shooting
Photos t
Modes: Smart Auto (Portrait, Night Portrait,
Backlight Portrait, Backlight, Landscape, White,
Motion, Tripod, Night, Macro, Macro Text, Blue Sky,
Sunset Sky, Natural Green, Natural Portrait, Macro
Color, Fireworks), Auto, Program, DUAL IS, Scene
(Night, Portrait, Children, Landscape, Text,
Close Up, Sunset, Dawn, Backlight, Fireworks,
Beach & Snow, Frame Guide, Beauty Shot) t t
Drive : Single, Continuous, Motion Capture, AEB
Timer : 10 Sec, 2 Sec, Double, Motion Timer
Videos
Playback
Type
Edit t
Modes: Smart Scene Detection (Landscape,
Blue Sky, Natural Green, Sunset Sky), Movie t Format: H.264 (Max recording time: 20 min) t
Size: 1280 X 720 HQ (30 FPS, 15 FPS),
1280 X 720 (30 FPS, 15 FPS), 640 X 480 (30 FPS,
15 FPS), 320 X 240 (60 FPS, 30 FPS, 15 FPS),
320 X 240 For Sharing (30 FPS) t t
Frame Rate : 60 FPS, 30 FPS, 15 FPS
Effect: Photo Style Selector, White Balance,
Smart Filter t t
Voice : Off, On, Zoom Mute
Video editing (embedded): Pause during recording,
Still image capture, Time trimming
Single image, Thumbnails, Multi slide show with music and effects, Movie clip, Smart Album*
* Smart Album category: Type, Date, Color, Week,
Face, Favorite
Resize, Rotate, Photo Style Selector, Image Adjust,
Smart Filter, Special Effect, Face Effect
Appendixes
127
Camera specifications
Effect
Voice recording t
Voice Recording (Max. 10 hours) t
Voice Memo in a photo (Max. 10 sec.)
Storage t
Photo Style Selector : Normal, Soft, Vivid, Forest,
Retro, Cool, Calm, Classic, Negative, Sketch,
Defog, Custom RGB t
Image Adjust
: ACB, Brightness, Contrast,
Saturation t
Smart Filter : Normal, Miniature, Vignetting,
Fish-eye 1, Fish-eye 2 t t
Special Effect : Color Filter, Elegant, Add Noise
Face Effect : Face Retouch, Red-eye Fix
Media
File format t
Internal memory: Approx. 13 MB t
External memory (Optional): microSD
TM
card (up to
4 GB guaranteed)
Internal memory capacity may not match these specifications.
t
Photo: JPEG (DCF), EXIF 2.21, DPOF 1.1,
PictBridge 1.0
t
Video: H.264 (MPEG-4.AVC) t
Audio: WAV
Image size
For 1GB microSD
TM
Super Fine Fine Normal
4320 X 3240
4000 X 3000
3984 X 2656
3840 X 2160
122
142
160
240
278
312
353
409
454
3264 X 2448
2560 X 1920
2048 X 1536
1920 X 1080
1024 X 768
206
211
335
510
762
1,626
401
409
637
936
1,373
2,575
These figures are measured under Samsung’s standard conditions and may vary depending on shooting conditions and camera settings.
588
594
908
1,314
1,931
3,090
Wireless network
Wi-Fi IEEE 802.11 b/g
DLNA
Bluetooth
Version: 1.5
t
Version: 2.0
t
QD ID: B016336
Appendixes
128
Camera specifications
Interface
Digital output connector
Audio output
USB 2.0
Video output
Mono (Internal speaker), Stereo (Microphone) t
A/V: NTSC, PAL (selectable) t
HDMI 1.4: NTSC, PAL (selectable)
DC power input connector
Power source
20 pin, 4.4V
Rechargeable battery
Lithium-ion battery (SLB-11A, 1130 mAh)
The power source may differ depending on your region.
Dimensions (W x H x D)
103.8 x 58.3 x 19.6 mm
Weight
161.1 g (without battery and memory card)
Operating temperature
0 - 40˚ C
Operating humidity
5 - 85 %
Software
Intelli-studio
Specifications are subject to change without prior notice.
Appendixes
129
FCC notice
FCC ID:A3LCL80
Caution
:
Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorientate, or relocate, the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
RF exposure statements:
This device is for handheld operation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
t
Declaration of Conformity
Trade Name
Model No.
Responsible Party
Address
: Samsung Electronics America, Inc.
: Samsung CL80
: Samsung Electronics America, Inc.
: 105 Challenger Road Ridgefield Park NJ
Telephone No. : 1-800-SAMSUNG (726-7864)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Samsung Eco-mark
It is Samsung’s own symbol mark is used to effectively communicate Samsung’s environmental friendly product activities to the consumers. The mark represents Samsung’s continuous effort on development of environmental conscious products.
Appendixes
130
Index
A
ACB
Adjusting
Contrast
Saturation
AF Lamp 115
AF Sound 113
Anynet+ 115
Aperture 36
Auto Contrast Balance
(ACB) 58
Auto mode 27
B
Battery
Beauty Shot mode 35
Blink detection 54
Bluetooth 109
Burst
Auto Exposure Bracket
C
Calibration 20, 116
Camera shake 30
Capturing an image 76
Cleaning
Appendixes
131
D
Date and time 114
Deleting files 72
Digital Image Stabilization 37
Digital zoom 28
Disconnecting the device 90
Display brightness 113
Display type 26
DLNA 104
DPOF 82
Dragging 22
DUAL IS mode 37
E
Editing 78
Enlarging 74
Entering text 100
Error messages 117
Exposure 57
F
Face detection
Facial brightness 35
Facial imperfections 35
Flash
Index
Focus area
Focus distance
Format 114
Frame guide 36
Frame rate 38
Function description 113
G
Gestures 23
Grid line 26, 113
H
Half-pressing 7
HDMI size 115
HDTV 85
I
Icons 21
Imprint 115
Intelli-studio 88
ISO speed 48
L
Light source
(White balance) 60
Long time shutter 36
M
Macro 49
Maintenance 118
Memory card
Metering
Motion recognition
Motion timer 46
Movie mode 38
Muting
My Star
O
One touch shooting 51
Optical Image Stabilization
(OIS) 29
P
Photo quality 44
Photo styles
Playback button 18
Playback mode 67
Printing photos 92
Print order 82
Program mode 38
Protecting files 71
Q
Quick View 114
Appendixes
132
Index
R
Recording
Recycle bin 73
Red-eye
Reset 114
Resizing 78
Resolution
RGB tone
Rotating 73, 78
S
Scene mode 34
Self-portrait 53
Service center 123
Settings
Shooting mode
Shutter speed 36
Slide show 74
Smart Album 70
Smart Auto mode 33
Smart face recognition 54
Smart filter effect
Smart Scene Detection
mode 40
Smart Touch AF 50
Smile shot 53
Special effects
Start image 113
T
Timer 45
Touching 22
Transferring files
V
Video
Appendixes
133
Video Out 115
Viewing files
Voice memo
Volume 113
W
Website
White balance 60
WLAN 95
Z
Zooming 28
Please refer to the warranty that came with your product or visit our website http://www.samsung.com/ for after-sales service or inquiries.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project